Ive installed cwm recovery, and I have two rom zips on my sd card. Whenever I go to flash them, I get an error message. Ill post the message in a sec. Please help! Thanks
Sent from my DROIDX using xda app-developers app
Ok, the error went something like:
Error:run_program(tmp/check_kernel)
I really want cm on this ( when I had my kindle fire I was in love with it) and would really appreciate some help.
Sent from my DROIDX using xda app-developers app
if you try to install a rom and see
Assert failed:
Run_program ("/tmp/check_kernel") ==0
E: Error in /sdcard/
(Status 7)
rom has a kernel check and can not be installed as it is
you need to find a rom version that is compatible with your kernel (system version), or change the system version on phone
if your phone has 2.3.4 system version 4.5.621, it can not be downgraded
use Pooka's CM7 flash with (7.1 Gapps)
Related
I have rom manager installed and am trying to install a rom from sdcard I keep gettin error message after it boots into recovery mode can someone tell me what I am doing wrong
Sent from my SPH-D700 using XDA App
Try giving us a little more details on what the error message says. Otherwise it's hard to determine what exactly you're doing wrong.
We can start with the basics, do you have ClockWorkMod installed?
Yes clockworkmod is installed, the error message e: file signature failed
E:failed to verify
Installation aborted
Sent from my SPH-D700 using XDA App
Try installing the ROM without using ROM Manager. Boot into ClockworkMod Recovery, then manually choose the zip and flash.
This usually means that clockwork is not installed correctly and that you are not flashing the rom from within clockwork.
Sent from my SPH-D700 using Tapatalk
I installed it from rom manager and it said it installed right, hold down vol down power and camera to get into recovery mode correct? Then how do I manually choose the zip file?
Sent from my SPH-D700 using XDA App
I rooted my epic w one click and I did a factory restore did that take out my root privs ?
Sent from my SPH-D700 using XDA App
It definitely sounds as though you haven't properly installed ClockWork -- IT appears you are booting in to the stock recovery, which will not allow you to flash a rom.
Assuming your phone is rooted, you will want to goto this link:
http://forum.xda-developers.com/showthread.php?t=782300
and download this method of installing clockwork. Follow the directions on the post, and you shouldn't have an issue getting clockwork to run.
I'm just curious....did you rename or move this from inside the phone? I know I moved a couple roms using astro and then tried and no go.....maybe it was just me tho...
Sent from my SPH-D700 using XDA App
Hello,
10 minutes ago I decided to go into the boot menu to install a new rom, the CM10 to Quarx because before I was on the epsylon, and I'm in recovery, custom recovery and it gives me an error message :'' E: Error in / system / bootmenu / script / recovery.sh (result: No surch file or directory)''
I told her doir be a bug, so I reboot the phone this time in normal and if anything my phone is stuck on the motorola m red, I can not run any rom, and install any rom ... .. Please help me, what should I do please, I lost her, I do not know what to do
thelink974 said:
Hello,
10 minutes ago I decided to go into the boot menu to install a new rom, the CM10 to Quarx because before I was on the epsylon, and I'm in recovery, custom recovery and it gives me an error message :'' E: Error in / system / bootmenu / script / recovery.sh (result: No surch file or directory)''
I told her doir be a bug, so I reboot the phone this time in normal and if anything my phone is stuck on the motorola m red, I can not run any rom, and install any rom ... .. Please help me, what should I do please, I lost her, I do not know what to do
Click to expand...
Click to collapse
Reflash sbf
Sent from my MB526 using xda app-developers app
ppero196 said:
Reflash sbf
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
how to flash sbf ?
thelink974 said:
how to flash sbf ?
Click to expand...
Click to collapse
Read:
http://forum.xda-developers.com/showthread.php?t=1216982
Sent from my MB526 using xda app-developers app
just boot your ROM , plug your phone to the computer , make sure you have USB debugging ON
using ADB or Android Commander , push new recovery into </system/bootmenu>
you can get it from your custom rom ZIP <cm7 , cm9 , cm10 , nvm>
I've been trying to install ilya's jb 4.2.2 cm10.1, i tried both version 12 & 13 but to no avail. Both just dropped dead in installation i'll post the error message below if anyone can help me you're very much thanked for helping a retard like me
here's the link to the rom's page
http://forum.xda-developers.com/showthread.php?t=2145187
Error Message
"Start Update
format () expects 4 args , got 5
E: error in /sdcard/"fileFolder"/"fileName.zip"
(status 7)
Installation aborted.
"
Noob4Pwn said:
I've been trying to install ilya's jb 4.2.2 cm10.1, i tried both version 12 & 13 but to no avail. Both just dropped dead in installation i'll post the error message below if anyone can help me you're very much thanked for helping a retard like me
here's the link to the rom's page
http://forum.xda-developers.com/showthread.php?t=2145187
Error Message
"Start Update
format () expects 4 args , got 5
E: error in /sdcard/"fileFolder"/"fileName.zip"
(status 7)
Installation aborted.
"
Click to expand...
Click to collapse
i get the same error. i believe it's because of the partition. u must flash this forumber one. i was pretty sure i had flashed it as i used to use this rom for a while but now i can't. so u just need to reflash the forumber partition
That error it's cause by either partition or wrong CWM recovery. I don't remember which...
Noob4Pwn said:
I've been trying to install ilya's jb 4.2.2 cm10.1, i tried both version 12 & 13 but to no avail. Both just dropped dead in installation i'll post the error message below if anyone can help me you're very much thanked for helping a retard like me
here's the link to the rom's page
http://forum.xda-developers.com/showthread.php?t=2145187
Error Message
"Start Update
format () expects 4 args , got 5
E: error in /sdcard/"fileFolder"/"fileName.zip"
(status 7)
Installation aborted.
"
Click to expand...
Click to collapse
It's a partition problem.
Just follow the steps to repartition your phone from this post.
http://forum.xda-developers.com/showthread.php?p=29505489
Sent from my U8800 using xda app-developers app
hkej said:
It's a partition problem.
Just follow the steps to repartition your phone from this post.
http://forum.xda-developers.com/showthread.php?p=29505489
Sent from my U8800 using xda app-developers app
Click to expand...
Click to collapse
This is how I solved the issue.
{A} backup IMEI using 5irom tool.
[1] I downloaded official B138, flashed using dload method.Reboot phone
[2] downloaded official B518 .flashed [upgrading from 2.2 to 2.3]. Reboot phone
[3]rooted the phone using super one click.
[4]downloaded CMW recovery and flashed.
entered download mode [volume up+power]
wiped factory/partition.
in mount and storage>format =cache.data & system.
[5]choose zip from sdcard ,selected forumber partition zip and instal.
[6]AGAIN choose zip from sdcard ,selected forumber partition zip and instal.
[7] choose zip from sdcard > cm10.2 for u8800 version 13.zip
[8]flashed gapps.
[9]reboot system
this method worked for me after it kept hanging on ideos logo every time i flashed the rom. long method but works. Don't forget to backup your imei.
the same problem
solved
I had some problems during ROM install and accidentally got my entire / deleted, so I had to flash an SBF.
I flashed some arbitrary 2.2 SBF, one I used before. Installed recovery during SndInit, and when I tried to install a ROM, it said there was an error.
I then, successfully, flashed TWRP using the same recovery, only to get the same "error in /tmp/sideload/package.zip status 0" error when trying to install CM10.2.
What can I do?
Install first a CM10 Rom to update your recovery then install CM10.2.
Sent from my NexusHD2 using xda app-developers app
cyrusct82 said:
Install first a CM10 Rom to update your recovery then install CM10.2.
Sent from my NexusHD2 using xda app-developers app
Click to expand...
Click to collapse
Isn't the latest TWRP updated enough?
GodSlayer said:
I had some problems during ROM install and accidentally got my entire / deleted, so I had to flash an SBF.
I flashed some arbitrary 2.2 SBF, one I used before. Installed recovery during SndInit, and when I tried to install a ROM, it said there was an error.
I then, successfully, flashed TWRP using the same recovery, only to get the same "error in /tmp/sideload/package.zip status 0" error when trying to install CM10.2.
What can I do?
Click to expand...
Click to collapse
First check your downloaded ZIP file if it is Ok. If you have MicroSD adapter for your computer, check ZIP on MicroSD just in your computer. In Windows/Linux GUI, this can be done by right click on the ZIP file and picking up "Verify" or something like it. This right-click-menu (ie. cascade menu) for ZIP file should be there if you have 7Zip (free) or WinRAR, WinZIP (both commercial) installed on your PC.
But it seems like you have broken partition layout, so reflash SBF. See Defy Wiki for more info: http://forum.xda-developers.com/wiki/Motorola_Defy
Hello all,
I'm fairly new to rooting and the like (only ever rooted a phone once before), and I need some help getting this figured out.
I've got a ROM successfully installed on the device, but wifi and bluetooth don't work, and trying to install the newest version seems to fail.
I'm running:
ROM: Slim Bean version "Slim-4.3.build.2.2-OFFICIAL-1764"
Kernel: 3.4.67-Slim-4.3-JWR-Build_1.1+
Recovery: Clockworkmod Recovery v6.0.2.3
In CWM, I've tried installing the following images:
Slim-mako-4.4.2.build.3-OFFICIAL3095.zip
pa_mako-4.2-BETA1-20140318.zip
When trying to install the Paranoid Android ROM, it gives the following errors:
Warning: no file contexts
Warning: No file_contextsset_metadata_recursive: some changes failed
E:Error in ---insert file location here---
(Status 7)
Installation aborted.
Then it seems to get a bit farther with the SlimBean 4.4.2 install, but says the following:
Format and Mount System, Mount Data. . .
Symlinks and permissions. . .
set_metadata_recursive: some changes failed
E: Error in ---file location again---
(Status 7)
Installation Aborted.
However, when I go back and re-install the 4.3 build, it just plows on through and finishes in a handful of seconds.
Anyone have any idea what I'm missing here? Or what I might need to try?
Yup.Since you said you are running CWM 6.0.2.3...update to latest recovery before updating. CWM latest 6.0.4.7. Also do a clean flash.Your issue will be resolved.
Sent from my Nexus 4 using xda app-developers app
ABHISHEKSR said:
Yup.Since you said you are running CWM 6.0.2.3...update to latest recovery before updating. CWM latest 6.0.4.7. Also do a clean flash.Your issue will be resolved.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Awesome! That did it.
Thank you so much! You saved my bacon!
Glad I could help !!!
Sent from my Nexus 4 using xda app-developers app