Hi all, I screwed up running an update to my ROM, recovered through Odin (again ha), flashed back to stock, rooted successfully, and installed Clockwork, but whenever I try flashing my ROM through ROM Manager, the phone reboots right, then gives me the "E: failed to verify whole-file signiture E: Signiture verification failed"
I just want to get back on BlackHole :\ I searched around but either people figured it out and didnt explain, or the problems variables were too far apart from mine. I have tried removing and reinstalling clockwork, and I have tried redoing the entire process to the same result.
Any insight?
I want to add that I'm not flashing Clockwork through Odin, because the files aren't available on the forum anymore. Is this the error?
You need to flash the cwrecovery.tar file, which enables you to flash zips signed with test keys. Look in the thread about flashing clockwork on win/*nix.
Sent from my SCH-I500 using XDA App
You're doing it right, just missing one step. Installing clockwork mod through rom manager only downloads the update.zip file for it to your sdcard, you have to flash the cwm compatible stock recovery through odin. the file can be found here:
www.androiddoes.net/sonofskywalker3/CWMrecovery.tar
sonofskywalker3 said:
You're doing it right, just missing one step. Installing clockwork mod through rom manager only downloads the update.zip file for it to your sdcard, you have to flash the cwm compatible stock recovery through odin. the file can be found here:
www.androiddoes.net/sonofskywalker3/CWMrecovery.tar
Click to expand...
Click to collapse
Excellent, I figured as much but since I couldn't find it anywhere I assumed it had been changed.
BEAUTIFUL. Thank you. Looking forward to running your 3.0. I was on 1.4 or something.
Just followed instructions for CM7 on eemc with nightly 106 and OC kernel.
Rom Manager says no superuser? So I installed from market and superuser says there's updated binary but can't complete auto install. But it put a .zip on sd card and said to instal via recovery... which puts me back to step 1 which was trying to use ROM manager to write recovery?
What went wrong here and how to fix? Didn't have any of these problems when I did my son's nc the same way last week.
Sent from my SPH-D700 using XDA Premium App
Don't know how to install cwm w/o rom manager. Put my card back to cwm img and tried to flash the updated binary.... says bad?
Guess there's something broke with 106 and su.
Started afresh with cm 102 (as recommended), gapps, and Oc kernel. All is well...
Zeam Launcher
Nook tweeks
Netflix
Netflix fixer
...good for now!
Sent from my SPH-D700 using XDA Premium App
Had the same problem here. I'm away from my Nook right now, but I fixed it by downloading Superuser from the Extras menu in RomManager, then rebooting to recovery via the normal shutdown screen and applying it manually. The zip is in the clockwork folder, in the goo-inside.me folder. Just select it from "*choose zip" menu and reboot.
I may have the details slightly wrong.
Superuser definitely got left out of #106.
Aloha,
cap
Thanks. I had to do the same to get su.
Wondering why is left out of 106.
I am having the same problem... except every time I try to download the new SU binary it says that there was an error and that I should boot into recovery blahblahblah, but when I do it says that there was an error installing the .zip file. What else can I do?
Knightsofwar210 said:
I am having the same problem... except every time I try to download the new SU binary it says that there was an error and that I should boot into recovery blahblahblah, but when I do it says that there was an error installing the .zip file. What else can I do?
Click to expand...
Click to collapse
I'm still on 102 no prob. They discuss this issue on the cm thread. Try doing it from rom manager.
Download Rom, extras, superuser...
Then instal from cwm under clockwork/downloads/...and some sub directory.
Sent from my NookColor using XDA Premium App
Ahh thank you, I couldn't find it before.
i have the latest clockworkmod installed and when i install an old rom it says error aborted.
i used to have an .img of an old clockworkmod but its gone ... and i forgot how to do it .. any help?
george.baskharon said:
i have the latest clockworkmod installed and when i install an old rom it says error aborted.
i used to have an .img of an old clockworkmod but its gone ... and i forgot how to do it .. any help?
Click to expand...
Click to collapse
you can flash an old version of CWM from Rom Manager!
Cwm 2.5.1.8
Sent from my HTC Desire using xda app-developers app
temp old recovery
flash attached zip from recovery to get old temp recovery.
does not wipe your current recovery
Allows to flash old Amend script ROMs
i had this for a while works good
source: i got it from wildfire forum ( don't remember exactly where)
Hello,
I own a defy mb525 with CM7.2.0. I am not so happy with this version (bad 3g access; battery life very short)
So I decided to install the CM10.1.
On the develloper page I saw that the status has been updated on the 26.03. But if I look for my model (mb525), I can find only a version dated on the 120904.
Is there a newer version for the mb525 or is it only for the mb520 and mb526 ?
Regards
http://forum.xda-developers.com/showpost.php?p=34616788&postcount=1
--> FAQ2
It should work for both. Same as latest builds of CM10.
thubi said:
http://forum.xda-developers.com/showpost.php?p=34616788&postcount=1
--> FAQ2
It should work for both. Same as latest builds of CM10.
Click to expand...
Click to collapse
Sorry I was meaning the 4.1.2 so it should be the 10.0
Cid156 said:
Hello,
I own a defy mb525 with CM7.2.0. I am not so happy with this version (bad 3g access; battery life very short)
So I decided to install the CM10.1.
On the develloper page I saw that the status has been updated on the 26.03. But if I look for my model (mb525), I can find only a version dated on the 120904.
Is there a newer version for the mb525 or is it only for the mb520 and mb526 ?
Regards
Click to expand...
Click to collapse
2ndboot builds: they are one build for both mb525 &5 26 .... so you can download the 26.03 nightly build and update on your MB525 :good:
Cid156 said:
Hello,
I own a defy mb525 with CM7.2.0. I am not so happy with this version (bad 3g access; battery life very short)
So I decided to install the CM10.1.
On the develloper page I saw that the status has been updated on the 26.03. But if I look for my model (mb525), I can find only a version dated on the 120904.
Is there a newer version for the mb525 or is it only for the mb520 and mb526 ?
Regards
Click to expand...
Click to collapse
Yes, there is CM10 from Quarx. Your device can be either mb525 or mb526 with red lens or green lens. CM10.1 from the same person also can.
hi
I have a similar question I have MotoDefy 525 running 2.3.7 I want to install ([ROM][JB+][4.3.1] MokeeOS 43.1 Defy/Defy(+) Official) http://forum.xda-developers.com/showthread.php?t=2453395
but it needs TWRP I tried installing on my 2.3.7 but it dosent install I looked around the forms I read that I have to up date my android version.
being a newbi im a little worried about bricking
A little help
can some one give the steps in Newbi language on how to update my phone to MokeeOS 43.1 please.:fingers-crossed:
Super_Moto said:
hi
I have a similar question I have MotoDefy 525 running 2.3.7 I want to install ([ROM][JB+][4.3.1] MokeeOS 43.1 Defy/Defy(+) Official) http://forum.xda-developers.com/showthread.php?t=2453395
but it needs TWRP I tried installing on my 2.3.7 but it dosent install I looked around the forms I read that I have to up date my android version.
being a newbi im a little worried about bricking
A little help
can some one give the steps in Newbi language on how to update my phone to MokeeOS 43.1 please.:fingers-crossed:
Click to expand...
Click to collapse
First of all, none of you guys ever read the stickies. It is packed with good info.
Our phone has a locked bootloader, it is almost impossible to brick.
Download latest CM10 and then install.
Ive come across a newbi problem im on the link of the latest cm10 (http://forum.xda-developers.com/showthread.php?t=1768702) and the file I try to flash wont install it gets aborted, I searched the forms for other cm10 and same issue file gets aborted.
If possible to be directed to the file I need to flash to cm10
not easy being newbi these days :crying:
Motorola 525 green lens running 2.3.7
What error do you get?
Sent from my MB526 using Tapatalk
hotdog125 said:
What error do you get?
Sent from my MB526 using Tapatalk
Click to expand...
Click to collapse
the error shows when I try to flash the .zip file _Install zip from sdcard_choose zip from sdcard I pic the file and it doesn't install it says aborted show me the yellow triangle symbol I was assuming im flashing the wrong file.
before I do an install I wipe data/factory reset and wipe cache partition
Super_Moto said:
the error shows when I try to flash the .zip file _Install zip from sdcard_choose zip from sdcard I pic the file and it doesn't install it says aborted show me the yellow triangle symbol I was assuming im flashing the wrong file.
before I do an install I wipe data/factory reset and wipe cache partition
Click to expand...
Click to collapse
You are trying to flash through stock recovery. Install through custom recovery.
hotdog125 said:
You are trying to flash through stock recovery. Install through custom recovery.
Click to expand...
Click to collapse
I tried that and im also giving me (installation aborted) I used file cm-10-20130918-NIGHTLY-mb526 but no luck
Super_Moto said:
I tried that and im also giving me (installation aborted) I used file cm-10-20130918-NIGHTLY-mb526 but no luck
Click to expand...
Click to collapse
The file is ok, i've installed it on my defy
MikBre said:
The file is ok, i've installed it on my defy
Click to expand...
Click to collapse
Im clue less what im doing wrong I looked on u tube on installing jelly bean im following the same steps but Im getting (file aborted) when I try flashing the file
what r the steps u take on installing the file ?
At first I tried: Reboot in _Recovery _Install zip from sdcard_choose zip from sdcard_pick the the file _yes install
it starts by saying
Finding update package...
Opening update package...
E:Can't open /sdcard/cm-10-20130918-NIGHTLY-mb526.zip
(bad)
Installation aborted.
2nd I tried
Reboot in Bootmenu
Recovery _ Custom Recovery etc ..etc ..
and get the same message
Finding update package...
Opening update package...
E:Can't open /sdcard/cm-10-20130918-NIGHTLY-mb526.zip
(bad)
Installation aborted.
always did the factory rest and wiping during both process
Super_Moto said:
Finding update package...
Opening update package...
E:Can't open /sdcard/cm-10-20130918-NIGHTLY-mb526.zip
(bad)
Installation aborted.
Click to expand...
Click to collapse
just to be sure, your phone is not connected to a computer when you did the flash, right?
jh20 said:
just to be sure, your phone is not connected to a computer when you did the flash, right?
Click to expand...
Click to collapse
yes phone is disconnected from computer,I had no issues installing cm7
My is CMRecovery v5.0.3.2-jordan
and Bootmenu <v1.1.1> could these be the problem some thing needs to be updated ?
Super_Moto said:
what r the steps u take on installing the file ?
Click to expand...
Click to collapse
If you want a video guide look at the Youtube channel of locslikes.
Therre is a guide call "MOTOROLA DEFY How To Install ClockWorkMod and Cyanogenmod 10 Jelly Bean Android"
MikBre said:
If you want a video guide look at the Youtube channel of locslikes.
Therre is a guide call "MOTOROLA DEFY How To Install ClockWorkMod and Cyanogenmod 10 Jelly Bean Android"
Click to expand...
Click to collapse
Im just guessing.... that my bootmenu seems to be out of date possible being the reason that jellybean wont install,
bootmenu is up to 2ndInit Recovery v2.3 can this file be installed over v1.1.1 ?
Super_Moto said:
Im just guessing.... that my bootmenu seems to be out of date possible being the reason that jellybean wont install,
bootmenu is up to 2ndInit Recovery v2.3 can this file be installed over v1.1.1 ?
Click to expand...
Click to collapse
out of curiousity, i restored my mb525 back to cm7 nightly 20111201 nandroid, which has cwm v5.0.3.2. i did not check the bootmenu version but it should be the same as yours. then, after formatting system/cache partitions, i flashed cm-10-20130918-nightly-mb526.zip, and it worked.
so i don't really know what's wrong with your phone, but i have a couple of suggestions for you to try. not that there's any logical explanations but try it anyway:
1. according to the error messages, you have the cm10 rom in the root folder of the sdcard. try creating a sub-folder called cm10 and copy the cm10 rom and the minimal gapps into it.
2. download the defy_fullwipe_ext4.zip and defy_fullwipe_ext3.zip ( for later use, when you want to revert back your rom) from here and put them in cm10 folder as well:
http://forum.xda-developers.com/showthread.php?t=1818520
3. reboot into recovery but don't do any format or wipe. instead flash the file defy_fullwipe_ext4.zip and this will format your partitions into the ext4 file system.
4. then flash the cm10 rom. if it installs sucessfully, then without any further wiping,nor flashing the minimal gapps, reboot the phone. (note that the os will reboot once more in the middle of booting up, seemingly having a bootloop problem. don't worry it's meant to do that, unless it rebooted more than once)
5. if it boots up sucessfully, do some basic set up first before rebooting back into recovery to flash the minimal gapps.
alternatively you could try flashing cm9.1 (ext3) to get a newer bootmenu and cwm versions before flashing cm10. no need to flash any gapps, just wipe system/cache partitions and flash the cm9.1 rom by itself. reboot into cm9.1, do basic set up. once it's ready reboot into recovery and do the above steps, starting from step 3, to flash cm10.
good luck.....
edit: did you get your cm10 rom from here:
http://quarx2k.ru/cm10-2ndboot-nightly-defy(+)/
jh20 said:
out of curiousity, i restored my mb525 back to cm7 nightly 20111201 nandroid, which has cwm v5.0.3.2. i did not check the bootmenu version but it should be the same as yours. then, after formatting system/cache partitions, i flashed cm-10-20130918-nightly-mb526.zip, and it worked.
so i don't really know what's wrong with your phone, but i have a couple of suggestions for you to try. not that there's any logical explanations but try it anyway:
1. according to the error messages, you have the cm10 rom in the root folder of the sdcard. try creating a sub-folder called cm10 and copy the cm10 rom and the minimal gapps into it.
2. download the defy_fullwipe_ext4.zip and defy_fullwipe_ext3.zip ( for later use, when you want to revert back your rom) from here and put them in cm10 folder as well:
http://forum.xda-developers.com/showthread.php?t=1818520
3. reboot into recovery but don't do any format or wipe. instead flash the file defy_fullwipe_ext4.zip and this will format your partitions into the ext4 file system.
4. then flash the cm10 rom. if it installs sucessfully, then without any further wiping,nor flashing the minimal gapps, reboot the phone. (note that the os will reboot once more in the middle of booting up, seemingly having a bootloop problem. don't worry it's meant to do that, unless it rebooted more than once)
5. if it boots up sucessfully, do some basic set up first before rebooting back into recovery to flash the minimal gapps.
alternatively you could try flashing cm9.1 (ext3) to get a newer bootmenu and cwm versions before flashing cm10. no need to flash any gapps, just wipe system/cache partitions and flash the cm9.1 rom by itself. reboot into cm9.1, do basic set up. once it's ready reboot into recovery and do the above steps, starting from step 3, to flash cm10.
good luck.....
edit: did you get your cm10 rom from here:
http://quarx2k.ru/cm10-2ndboot-nightly-defy(+)/
Click to expand...
Click to collapse
I did try using that link but the files still would abort when flashing, also tried http://d-h.st/users/Quarx files it did the same thing
I followed your instruction but decided to goto cm 9 first I flashed the (ext3) file it installed and cm9.1 installed also installed twrp with no issues but when I was going through cm9 and its functions I couldent go on line a popup message (Unfortunately, brower has stopped) also I wasn't able to log on google play a pop up message (Unfortunately,com. google android.gb has stopped). so I got fed up and decided to goto cm10.1 so I first flashed with ext4.zip it installed and then tried to flash 10.1 file once again the file wouldn't install it gave me aborted file message again. I had no choice to reboot and I had to reinstall the factory file(brick). I am now back to where I started :silly: cm7 2.3.7 its been a hell of a weekend ........... ill give it another shot soon :fingers-crossed:
Hi,
I'm at my wits end. I had SlimRom installed for a week and all was fine, but I was curious about what new ROMs were out there so I backed up my phone using ROM Manager and did all the usual stuff to get a new ROM. I installed Gummy, but didn't like it; I installed one other ROM that I can't remember its name, but also didn't like that. I realized my comfy home of SlimRom was where I wanted to be, so I tried to flash the backup.zip that I had created but it kept saying installation aborted (Status 0).
After hours of countless attempts and just weird behaviour (sometimes boot loops, sometimes not booting into recovery, etc.) I finally got my phone back to stock.
I downloaded the latest SlimRom file 3 times to make sure it wasn't a corrupt zip (twice from my PC and once from my phone directly). Both the zip directly from Slim as well as the backup.zip that I made with ROM Manager give me the same installation aborted. The other error it gives is "E: Error in /data/media/0/slim....zip". I'm wondering if somehow my partition is screwed up. I tried using Odin's repartition, which just erased my recovery partition, but I got that back thankfully! When I wipe data/factory reset it says wipe complete (and the ROM does reset to factory) but it also says "E:unknown volume '/sdcard/.android_secure' "...I'm wondering if that relates to why the backup.zip file won't read properly. Maybe the partition got screwed up somehow?
I can flash a SU zip so it's not a flashing problem, per se. And thankfully Odin always works!
I think I may need the stock PIT file for the Telus S4 l337m, which I found but my phone says "secure check fail: pit"
I'm not sure where to go from here...
Rom manager is your problem. That software I'd waaaaay out of date and rarely ever works on newer phones.
Get you goo manager. Allow SU. Then hit the menu button and then hit install openrecoveryscript. You will get TWRP recovery. Then you follow the OP of your ROM of choice to install.
Sent from my GT-I9505G using XDA Premium 4 mobile app
Thanks for the suggestion. I used Goo but it was no help. I can flash other ROMs fine. It seems to be just SlimBean that I can't flash :s. I've used TWRP recovery as well as CW and neither work.
Any other ideas?
This is a pickle I am completely unsure about, then... I am sorry I can't be of more assistance. It does seem like the partition is borked.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app