Database Users

[Q] [HELP]:'(phone not powering on after 2.2 chinese flash HELP!!!

i firstly had an unsucessful flash by installing ics cm9,on miui then i was stuck on bootlooop but to get my phone working again i flashed china sbf 2.2
but it was stuck der olso so i flashed JORDN_U3_97.21.51 eclair
it started working normally but ....
now when i rooted nd installed custom recovery via systemrecovery.apk
it all worked well...but when i tried to install cm7.11 by quarks its suck on the motorola logo with that bee what to do help!!!
i cant stay on this eclair its baaad!!
(i was on miui before all this adventure took place ,i used to flash my phone without any worry until this haapppend help me plzz anyone)

See if this guide helps. Use the cee Froyo.

@zorua
can i install cm7.11 after cee froyo?
without any probs?

where do i put the nandroid of cee froyo?

d.o.doubleg said:
where do i put the nandroid of cee froyo?
Click to expand...
Click to collapse
clockworkmod/backup on sd card.
Also, yes you can install CM7 after installing cee froyo.
Have you installed 2nd init on eclair?

sir but ive used goapks system recovery nd installedd the custom recovery as on cee's froyo what 2 do now?

d.o.doubleg said:
sir but ive used goapks system recovery nd installedd the custom recovery as on cee's froyo what 2 do now?
Click to expand...
Click to collapse
If you are using goapkrev recovery, then the backup goes into sdcard/goapkrev/backup
If the folder doesn't exist, make it.

thanks it worked thanks mate!
dude
1 more question can i install the custom recovery from system recovery.aqk
and install cm7.1.110 normally as i used to do or i need to flash the chinese sbf again?THANKS!!

On cee froyo, install 2nd init and then you can flash cm7 using that.
Sent from my MB526 using XDA App

sir 1 more noob question i forgot to flash gapps can i do it using sndinit
will it be stuck again?

sir its not working i installed 2ndinit thru sndinit nd then installed cm7 and gapps iy all went smooth but wheen it booted nd came upon dat touch the android to start it starts restarting from dat cm7 animation again and again i donno wat to do
can i flash the sea froyo(chinese froyo)again and start from the stock?

Yes you can flash gapps again but remember to clear the cache after you flash it.
EDIT: Try clearing data and cache from clockworkmod again. Also, disable the overclock module from 2nd init and see if it works after that.
Sent from my MB525 using XDA App

can i flash sea froyo (as said chinese froyo) from rsd lite?

Why do you want to flash froyo again? Did you try what I said in my previous post?

can u tell me d whole procedure step by step in detail ive tried a lot last time u tell me dis

whenever i'm trying to touch that android logo my phone restarts from that cm7 logo
whattodo

plz help anyone please!

Are you blind or what? Did you try my suggestions in the other post? Did you try formatting data+cache from clockworkmod? Also, disable the overclock module from 2nd init
Sent from my MB525 using XDA App

i tried clearing them but it is still restarting at that cm7 loop.
what to do.

Download the nightly this time from tanguy.forumdoandroid.com and flash it again. Clear data and cache and see if it works now.
Sent from my MB525 using XDA App

Help on Flashing process for New Nightly CM10/CM9

Hi friends,
Currently I am GB I want to flash new CM 10 / Sleam Bean Builds But I am confused on the Recovery Stuff Like How to Change to 2nd Build and Conversion to Ex3...
Because I don't want stuck in SBF flashing process my Laptop is Dead
Can same one give me step by step process
Thank...
Sent from my MB526 using xda app-developers app

Anands3 said:
Hi friends,
Currently I am GB I want to flash new CM 10 / Sleam Bean Builds But I am confused on the Recovery Stuff Like How to Change to 2nd Build and Conversion to Ex3...
Because I don't want stuck in SBF flashing process my Laptop is Dead
Can same one give me step by step process
Thank...
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
go to terminal emulator and tipe: mount | grep data you can see what type of file system, personally not use ext4 for recovery problems "E:/can't mount bla bla"
use the normal process to flash the new rom, if you want to install Epsylon builds you have to set 2ndboot from bootmenu.
if you're with the ext4 file system and want to use ext3 I think you have to flash sbf previously full wipe from stock recovery.

[Q] Defy+ not loading any rom.

(i read many threads relating my issue but they were not same, they was little difference in the problem. and i also tried there solutions but no improvement. so i decided to ask in a thread)
i was using defy+ with CM7 rom.
I installed this rom on my defy+
http://forum.xda-developers.com/showthread.php?t=2044797
first it booted and was working but after rebooting it resulted in boot loop .
( it shows Motorola sign then shows rom animation within few seconds is resumes rom animation and it keeps repeating animation.)
i waited for it an hour but is didn't go well.
then i tried restoring my old rom using CWM but i was unable to restore it is also resulted in same...
then i tried installing sdf using rsd but i have no improvement....
Now i can only go to bootloader version 09.1 and i says battery is low , can't program . i put the charger for whole night but i still says battery low can't program
can you please help me solving this problem

After installing that Rom you needed to enter boot menu and format data to ext4. Now, if you're unable to flash any sbf due to low battery then refer here: http://forum.xda-developers.com/showthread.php?t=892026
Or if you have access to another defy then use its battery and flash the sbf. Wipe data from stock recovery if you run into any issues after sbf flash
As stated below dalvik cache should be wiped, and data is automatically wiped when you format it to ext4 as stated above
Sent from my MB526 using xda premium

thekguy said:
After installing that Rom you needed to enter boot menu and format data to ext4. Now, if you're unable to flash any sbf due to low battery then refer here: http://forum.xda-developers.com/showthread.php?t=892026
Or if you have access to another defy then use its battery and flash the sbf. Wipe data from stock recovery of you run into any issues after sbf flash
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
Or in other words you need to wipe data/cache and dalvik BEFORE and AFTER flashing the custom ROM (neagan or other). For now charge the battery and do the sbf flash. Pay attention at the "optional" indications. It better to do it.

CWM is missing
using your link i can solve the problem
but i dont have CWM so i cant wipe delvik data/cach
i only have bootloader
i only can go to bootloader and can't do any thing else. because CWM is removed.
tell me if you have any information about to do something using bootloader..

Do it from stock recovery, data wipe and cache wipe
Sent from my MB526 using xda premium

From stock recovery (bootloader) you will format as ext3 but is better to format in ext4 and that can be done from custom recovery. For that you have to install 2init and run it.

He's unable to boot...boot loop was before battery issue
Sent from my MB526 using xda premium

thekguy said:
He's unable to boot...
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
Yes because of low battery. Software solution is ... after charging.

where is stock recovery??
how to boot in stock recovery??? sorry I dont know if there any stock recovery is existed...... ( i tried different buttons while Motorola sign but i got nothing except bootloader and download mod)
tell me i think i can do it using stock recovery
because there is no problem in bootloader. even i am able to flash new SDF.
it makes trouble in loading ROM....
what do you think?

battery is working now
thekguy said:
He's unable to boot...boot loop was before battery issue
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
i solved this problem using universal charger. i pulled off the battery and put in universal charger and charged it for two hours.

stock recovery?
now i just need to know how to boot in stock recovery???

AW: [Q] Defy+ not loading any rom.
There is a beginner guide anywhere in xda/defy sektion
You should read it
MB525 red lense

stock recovery?
i just need to now how to go into stock recovery?

How do I enter Recovery Mode?!: With the Phone off press VOLUME DOWN then, while still pressed, power up the phone and leave VOL key pressed until you see a Yellow triangle, once you see this you are in Recovery now press Vol Up and Vol Down at the same time (if you are in Froyo) and the menu will appear, if you are on Éclair the menu should appear without having to press anything.
copy/paste from this thread.

thanks
Thanks bros
I recovered my phone and i is running with CM7 and i am not gonna try CM10 again until it comes with all bug fixes..
thanks again for your help..

.zip cwm for galaxy y

I have googled but cannot find any. Plz give a link(for gts 5360)
Sent from my GT-S5360 using xda app-developers app

mjobanjatt said:
I have googled but cannot find any. Plz give a link(for gts 5360)
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Here is it.... :good:
JUST PRESS THANKS IF I HELPED...

Varun hellboy said:
Here is it.... :good:
JUST PRESS THANKS IF I HELPED...
Click to expand...
Click to collapse
The installation was successful and it boots into CWM but next time I boot into recovery and there was stock recovery. I reinstalled CWM and same thing happens
Sent from my GT-S5660 using xda app-developers app

mjobanjatt said:
The installation was successful and it boots into CWM but next time I boot into recovery and there was stock recovery. I reinstalled CWM and same thing happens
Sent from my GT-S5660 using xda app-developers app
Click to expand...
Click to collapse
because it is a temporary cwm so you should flash it again and again for use

mjobanjatt said:
The installation was successful and it boots into CWM but next time I boot into recovery and there was stock recovery. I reinstalled CWM and same thing happens
Sent from my GT-S5660 using xda app-developers app
Click to expand...
Click to collapse
There are two types of cwm
Temporary - for users of stock kernel or custom kernel that uses stock recovery
Permanent - cwm is built into the custom kernel & replaces stock recovery
if you want a permanent cwm flash a kernel with permanent cwm (see the kernel features in it's thread)

mjobanjatt said:
The installation was successful and it boots into CWM but next time I boot into recovery and there was stock recovery. I reinstalled CWM and same thing happens
Sent from my GT-S5660 using xda app-developers app
Click to expand...
Click to collapse
Flash any kernel that has integrated cwm to have cwm permanently .....

mjobanjatt said:
The installation was successful and it boots into CWM but next time I boot into recovery and there was stock recovery. I reinstalled CWM and same thing happens
Sent from my GT-S5660 using xda app-developers app
Click to expand...
Click to collapse
try hells fusion.... best kernel for SGY....

Hasn't ANYONE come up with a permanent cwm for our cute little y?!

Kobro said:
Hasn't ANYONE come up with a permanent cwm for our cute little y?!
Click to expand...
Click to collapse
there has been a permanent cwm for galaxy y for years!!
there are two types of cwm
1 - tempory cwm zip
flash this in stock recovery to get to cwm - needs to be flashed each time you want to enter cwm
2 - permanent cwm
flash a custom kernel with cwm built in - this replaces stock recovery
If you want a permanent cwm just flash a kernel that has cwm built it!

marcussmith2626 said:
there has been a permanent cwm for galaxy y for years!!
there are two types of cwm
1 - tempory cwm zip
flash this in stock recovery to get to cwm - needs to be flashed each time you want to enter cwm
2 - permanent cwm
flash a custom kernel with cwm built in - this replaces stock recovery
If you want a permanent cwm just flash a kernel that has cwm built it!
Click to expand...
Click to collapse
thats exactly what i meant! the first option is hardly permanent, especially if you accidentally delete the .zip.
and what if someone doesn't want to flash kernels?
other phones have a .zip that you flash once and have cwm permanently. that's what i meant by a permanent cwm!

Kobro said:
other phones have a .zip that you flash once and have cwm permanently. that's what i meant by a permanent cwm!
Click to expand...
Click to collapse
Then get another phone that has that function.
Remember, our phones are not godly, not everything-can-do phones. They are only bottom-range phones. Hardware and software limitations cause this issue. If you want to fix it, do it yourself.
But if you want to contradict yourself and say "I wanna stick to my little Y" then flash a kernel.
Which is essentially in a zip.
And then you get permanent CWM.
Problem solved.

Kobro said:
thats exactly what i meant! the first option is hardly permanent, especially if you accidentally delete the .zip.
and what if someone doesn't want to flash kernels?
other phones have a .zip that you flash once and have cwm permanently. that's what i meant by a permanent cwm!
Click to expand...
Click to collapse
other phones work in a different way - for example HTC phones have fastboot and a recovery totally different from a samsung galaxy y 5360
the only way in this phone to replace the recovery perminantly is to flash a kernel that has it

GT-S5360b Problems with rom /cwm
Hello guys, I was trying to install the rom PureKat 3.0 (also tried the 1.0 and the 1.5 update extreme) in Galaxy Y GT-S5360b with cwm v5.0.2.6, but got the following message
'' E: Can not open / sdcrd/PureKat1.0.zip
(bad)
Installation aborted. ''
Please, Would anyone help me solve this, I have already given wipe data / reset, wipe cache partition, went into mounts and storage and wipe gave to all options and let it all assembled, but received the same message.
attachments below
. www . dropbox . com /s / yjemrraamenyd1x / CAM00302 . jpg
i'm new herre,so , sorry for write the link with space .

Guh18 said:
Hello guys, I was trying to install the rom PureKat 3.0 (also tried the 1.0 and the 1.5 update extreme) in Galaxy Y GT-S5360b with cwm v5.0.2.6, but got the following message
'' E: Can not open / sdcrd/PureKat1.0.zip
(bad)
Installation aborted. ''
Please, Would anyone help me solve this, I have already given wipe data / reset, wipe cache partition, went into mounts and storage and wipe gave to all options and let it all assembled, but received the same message.
attachments below
. www . dropbox . com /s / yjemrraamenyd1x / CAM00302 . jpg
i'm new herre,so , sorry for write the link with space .
Click to expand...
Click to collapse
Your download was incomplete.Re-download the whole ROM again without any data interruption.

samsung galaxy y
hi guys i want to bring back my original samsung galaxy y os. please give me the link to flash it back. thanks

[Q] Installation aborted Status (0)

Hello,
first im a noob in this, so please help me!
I installed CWM 2.5 for my defy to install CM11 Android Kitkat, after wiping data and cache, I tried to install it with install zip from sdcard, but then the installation ended with the Status 0 Installation Aborted Error. What did I do wrong? Other threads about that problem didn't helped me further, I just dont understand. I heard something about flashing kernels is it maybe that or is the version too old? Pls help!

http://forum.xda-developers.com/showthread.php?p=48501247
Use this to update the recovery then reboot, enter again in bootmenu -> recovery and flash what you want.
Sent from my MB526 using Tapatalk

cyrusct82 said:
http://forum.xda-developers.com/showthread.php?p=48501247
Use this to update the recovery then reboot, enter again in bootmenu -> recovery and flash what you want.
Sent from my MB526 using Tapatalk
Click to expand...
Click to collapse
Thanks, but how exactly can I update the Clockworkmod recovery with that file? It's not a update.zip and not a app either.

Install as you instal a Rom in CWM recovery.
Note: the recovery will change to TWRP.
Sent from my MB526 using Tapatalk

cyrusct82 said:
Install as you instal a Rom in CWM recovery.
Note: the recovery will change to TWRP.
Sent from my MB526 using Tapatalk
Click to expand...
Click to collapse
Thanks, works perfectly