Hello,
I'm a user of the legendary HD2(thanks to y'all). I recently dropped it and something appeared on the screen. Not sure it's the digitizer or the LCD. The glass seems fine and touch response in the affected area also seems okay. Want to fix this soon so I don't know whether I should replace the LCD or digitizer or both. Please Help!
Related
please help My touch sceen is broken
Hi guys, any one can help me where can I buy touch screen for my shift I have braked it during change new screen protector
thank you
R.I.P.
That is bad. I searched ebay recently for broken shifts as I want
to collect a few for parts to be sure to keep my 100% SHift at 100%.
Not much found, no screens. So send it in for repair I suppose.
mosobhy said:
please help My touch sceen is broken
Hi guys, any one can help me where can I buy touch screen for my shift I have braked it during change new screen protector
thank you
Click to expand...
Click to collapse
Ive seen a couple of people here have damaged their screen whist changing their screen protectors!
What exactly did yu do, so we can hopefully prevent other members from doing it in the future.
Could it just be the digitizer that goes infront of the LCD screen?
Thanks guys .
I looked in Internet too without any effect.I will let it till I fly to Hongkong next month,i hope i can find there.
but please be aware by changing the screen protector because you can not think that you remove the touch screen too with the screen protector because its very thin same like screen protector.
any way it was my bad day
thanks for helping me
For a bit time ago i accidently broke my lcd display on my hd2, and because htc could not fix this cheap i decided to try myselvf.
first i ordered a lcd and a new digitizer and soldered them together and fixed everything just like in the video and the lcd started to work, but now my touch pad does'n work! I can't do anything
Then i took the screen out and ordered a new one from ebay which was assembled from the shop.
And same resault
what could be the problem? I have a danish hd2 and i have tried to update the firmware after i replaced the screen and digitizer and still no respond
what could be the problem?
hey, did u fix the digitizer yet. i had a similar problem. the volume buttons got stuck in and i decided to open it and fix it. right after closing it back the digitizer stopped functioning...............please let me know asap if u managed to fix urs and how u did it thanks
Same problem here
I've got the exact same problem. Replaced LCD and digitizer but it is still not working. Additionally the screen is a little yellowish. Anyone knows if this might be related and any idea who to possibly fix this?
Hi, I have exactly the same problems, even tried with 2 fresh new digitizers. Could it be that they are extremely sensitive on the inside? Or is it some glitch somewhere?
Extremely frustrating!
Sent from my HTC HD2 using XDA App
well mine is in the scrapped now. when my digitizer arrives and i sort things out i will get back to you
Hi, I bought HD2 with broken digitizer, so after it came to me I immediately buy new digitizer, didn't look for the cheapert but once again I resolve myself to never buy things for china digitizer doesn't work so I need to new one from USA, send it to my friend and he repair it within day, now everything work... and yes digitizer are very sensitive
Hi guys, i followed all the indictaions on the official videos but i think i broke something! I had an HTC hd2 with a broken digitilizer but the screen worked fine. I bought a screen+digitilzer combo and replaced it but it didnt work.
The screen does not show anything (black screen) but the backlight of it is on!
I tought maybe was a problem of that lcd so i tested the original screen (that was working) and it does the same.
What could be the problem??
Please i need help
come onn, anyone ?
please guys, anyone ??
Sounds like a defective lcd to me. I'd try an RMA asap on getting another unit before your DOA warranty (if the lcd has one) runs out.
it's not the LCD. I had a working LCD but a defective digitizer, i bought the lcd+digitizer replacement and now both screens do the same , just the backlight is on. And before i change the screens the original lcd was working fine.
Could it be because the LCD is not correctly pasted into the chassis ? i really don't know what could it be the problem. The lcd is correctly connected to the mainboard. What could i broke in the process?
Thanks connexion2005 for the help anyways, is nice to see someone finally answered hehe!
zeba5 said:
it's not the LCD. I had a working LCD but a defective digitizer, i bought the lcd+digitizer replacement and now both screens do the same , just the backlight is on. And before i change the screens the original lcd was working fine.
Could it be because the LCD is not correctly pasted into the chassis ? i really don't know what could it be the problem. The lcd is correctly connected to the mainboard. What could i broke in the process?
Thanks connexion2005 for the help anyways, is nice to see someone finally answered hehe!
Click to expand...
Click to collapse
If you were not really gental with the internal parts of the phone, more presisly the ribbons that connect each part to the main board you could have cause micro cracks in the copper strips of the ribbons. Look at the closely with a magnifying. glass if possible.
today i was able to sync it literally with no idea of what i was touching. I also figured that the digitizer works , i was able it dial some numbers. The phone appears to work.
So, Backlight is on, Touch (digitizer) also works, but not showing anything on the LCD.
Could it be a mainboard problem ?? I'm trying to use logic because i don't know anything about cellphones and how do they work in terms of components.
Could it be the ribbon ? I dont think so, i have two screens and both of them do the same (backlight on but not showing anything).
I'm clueless!
Don`t panic. Calm down, watch a demolution tuturial. You probably miss smt. Good luck
But it could be a ribbon...
Hey guys,
I have a problem. A week ago I dropped my hd2 and the screen was smashed. I took it to the service and they replaced the digitizer. Now, as it turned out the lcd displays badly and the say it has to also be replaced. I know that after the drop the lcd worked fine. Now it looks like this: http://img857.imageshack.us/i/imag0001u.jpg
My question is - is this broken lcd? it has to be removed? or can I do something with it? is it the fault and they've done something wrong?
Thanks for answers.
Wrong forum.
Btw if your screen was working fine before you sent it, then its simple as sending the phone back and asking them to replace the screen coz they've done a ****ty(pardon my french) job on that, mate. They either were careless when separating the digitizer from the screen or they've just replaced it with a different 1(not even tested probably).
Still their fault, sent it back, simples.
Ok, I recently fell on my HTC Trophy(Verizon Version), cracking my screen. Before that happened I had a weird LCD problem that came out of nowhere. I replaced both the touch digitizer and LCD screen successfully and turned it on. It worked perfectly. No screen defects ect. Then I later turned it on and the same problem happened! Here are some pics to show you. Do I need A new LCD (oh god) or can I fix it? any answers will be much appreciated. Also, the auto thread search thing is wonderful, great idea!
EDIT:I can't see the spots when the LCD is off.
When I was doing a laptop LCD replacement screen, I had accidentally left a bubble and was so annoyed that it would not display where the bubbles were.
However after 2 weeks the bubbles just disappeared and the laptop's LCD screen was working correctly.
You might want to wait a little longer and see if the heat will evaporate it?
(Good luck)