Hi guys, i followed all the indictaions on the official videos but i think i broke something! I had an HTC hd2 with a broken digitilizer but the screen worked fine. I bought a screen+digitilzer combo and replaced it but it didnt work.
The screen does not show anything (black screen) but the backlight of it is on!
I tought maybe was a problem of that lcd so i tested the original screen (that was working) and it does the same.
What could be the problem??
Please i need help
come onn, anyone ?
please guys, anyone ??
Sounds like a defective lcd to me. I'd try an RMA asap on getting another unit before your DOA warranty (if the lcd has one) runs out.
it's not the LCD. I had a working LCD but a defective digitizer, i bought the lcd+digitizer replacement and now both screens do the same , just the backlight is on. And before i change the screens the original lcd was working fine.
Could it be because the LCD is not correctly pasted into the chassis ? i really don't know what could it be the problem. The lcd is correctly connected to the mainboard. What could i broke in the process?
Thanks connexion2005 for the help anyways, is nice to see someone finally answered hehe!
zeba5 said:
it's not the LCD. I had a working LCD but a defective digitizer, i bought the lcd+digitizer replacement and now both screens do the same , just the backlight is on. And before i change the screens the original lcd was working fine.
Could it be because the LCD is not correctly pasted into the chassis ? i really don't know what could it be the problem. The lcd is correctly connected to the mainboard. What could i broke in the process?
Thanks connexion2005 for the help anyways, is nice to see someone finally answered hehe!
Click to expand...
Click to collapse
If you were not really gental with the internal parts of the phone, more presisly the ribbons that connect each part to the main board you could have cause micro cracks in the copper strips of the ribbons. Look at the closely with a magnifying. glass if possible.
today i was able to sync it literally with no idea of what i was touching. I also figured that the digitizer works , i was able it dial some numbers. The phone appears to work.
So, Backlight is on, Touch (digitizer) also works, but not showing anything on the LCD.
Could it be a mainboard problem ?? I'm trying to use logic because i don't know anything about cellphones and how do they work in terms of components.
Could it be the ribbon ? I dont think so, i have two screens and both of them do the same (backlight on but not showing anything).
I'm clueless!
Don`t panic. Calm down, watch a demolution tuturial. You probably miss smt. Good luck
But it could be a ribbon...
Related
Hi
I have a Qtek 9000 and recently I broked the display. As I had the service manual I thought I coud replace the display by myself. I bought a new LCD + touch screen on ebay and the replacing of the LCD was easy and went quite well. The lcd works fine but the touch screen don't. I cheked and clean all the contacts but couldn't make the touch screen work.
So I wrote de seller and we agree to send back de display and receive a new one that he will test bofore posting.
I placed this new display and the problem remais the same. The lcd works fine but the touch screen don't, so I think the problem could not be here.
I made a hard reset and even downgraded to the original ROM but the touch screen still not working.
Can anyone help me with this
Thanks
Have you tried the touchscreen side of things before re-asembling the casing?
I have had problems with the seal on the casing around the screen activating the touch screen permanently - so that it runs really slow (if at all) when using the keypad.
damn, did you get the touch screen to work at all?
which LCD + touch did you buy from ebay? hopefully we can avoid this seller and get something that works.
ever thought of buying the touch screen separately and putting that on?
Let us know how it goes.
whitemoo.
after disasembling/asembling device had the same ussie with touch,after a cup of hours using it.
armandoramos try to open,when UNI works,only a part of UNI with LCD(look page 21 in service manual-bottom picture,page 22 & page 23-middle picture),then try how works your touch.If it works-you just had pinch the LCD coaxial cable module.
i had a problem with my touch screen, i was lucky enough to find a second hand uni in a local market with a busted lcd but working TS.
i swopped over the TS and re-assembled my uni, one thing i did have to add was a tiny piece of foam between the ribbon cable assembly and the case, this was to push the two ribbon cable sections (TS and LCD) together, for a better connection, relying on the sticky bits alone was not enough.
hope this helps.
Ok I need help from the gods of xda
I dropped my tilt the other day. When I picked it up everything seemed fine, yet the screen was completely white. No signs of cracks or a broken lcd. So I've tried the following: Soft reset, Hard reset, took out the battery, took apart the phone and disconnected the lcd and then re connected it. Still the same problem. WHITE SCREEN!
I can still receive/make calls, when i touch the screen in places where i remember the menus to be it still responds due to the noise, also the open and close noise still sounds.
The phone was bought new on Ebay, so i don't have a warranty through them or AT&T. After much research I hear people saying the same has happened to their phones as well and that there is a ribbon or flex cable problem. Something about still giving power to the LCD but not data, thus the white screen.
Now what I dont understand is do I need a new LCD because it has that ribbon/flex cable on it???? (link)
or
Do I need this product?(link)
Both contain a "flex cable" so im confused and frustrated, someone please help! any ideas would help
whew bought an LCD with digitizer on ebay for $45 and fixed it. Very easy process
vsicarbon said:
whew bought an LCD with digitizer on ebay for $45 and fixed it. Very easy process
Click to expand...
Click to collapse
hi there, would it be possible to post the link to ebay item? i also need a new touch-screen.tnanks
I am curious about this as well. I have a friend who has a hermes and he mentioned to me that that his screen was starting to go white like explained here. I look at his phone and I also noticed that the bottom hardware keys were not working at all.
I am wondering if this same ribbon cable for the LCD would also be the same one for the bottom keypad and if I fix the screen the keys will become active again.
Anyone have any experience with this?
Thanks,
I am wondering if this same ribbon cable for the LCD would also be the same one for the bottom keypad and if I fix the screen the keys will become active again.
Click to expand...
Click to collapse
That i dont know but here is the link to the LCD screen w/ digitizer
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&Item=350099750789&Category=162&_trksid=p3907.m29
Same product and vendor I got mine from. Shipping took 3 business days. I advice to buy the insurence
Park City said:
I am curious about this as well. I have a friend who has a hermes and he mentioned to me that that his screen was starting to go white like explained here. I look at his phone and I also noticed that the bottom hardware keys were not working at all.
I am wondering if this same ribbon cable for the LCD would also be the same one for the bottom keypad and if I fix the screen the keys will become active again.
Anyone have any experience with this?
Thanks,
Click to expand...
Click to collapse
Tuck in for a long read and perhaps no single answer for all cases:
http://forum.xda-developers.com/showthread.php?t=303872
In short, yes the d/pad cable and LCD screen connections are linked which is why it is not uncommon for the white screen to show up when the d/pad is not working.
To the OP - I would just point out that if you get the white screen after a fall it may just be a loose connection at the d/pad and no need for new parts.
Dismantling instructions here:
www.mikechanon.net
But let's not start discussing the white screen here, please use the first link I gave above if you need to post.
Mike
a user i dont recall now his name,fixed is whitescreen by replacing the camera,open the device and remove the camera module, reassemble to test.
Hey guys,
I have a problem. A week ago I dropped my hd2 and the screen was smashed. I took it to the service and they replaced the digitizer. Now, as it turned out the lcd displays badly and the say it has to also be replaced. I know that after the drop the lcd worked fine. Now it looks like this: http://img857.imageshack.us/i/imag0001u.jpg
My question is - is this broken lcd? it has to be removed? or can I do something with it? is it the fault and they've done something wrong?
Thanks for answers.
Wrong forum.
Btw if your screen was working fine before you sent it, then its simple as sending the phone back and asking them to replace the screen coz they've done a ****ty(pardon my french) job on that, mate. They either were careless when separating the digitizer from the screen or they've just replaced it with a different 1(not even tested probably).
Still their fault, sent it back, simples.
Hey guys,
I have a problem. A week ago I dropped my hd2 and the screen was smashed. I took it to the service and they replaced the digitizer. Now, as it turned out the lcd displays badly and the say it has to also be replaced. I know that after the drop the lcd worked fine. Now it looks like this: http://img857.imageshack.us/i/imag0001u.jpg
My question is - is this broken lcd? it has to be removed? or can I do something with it? is it the fault and they've done something wrong?
Thanks for answers.
Read this post by XDA member Facdemol, this post will help you answer your question.
emjakmaciej said:
Hey guys,
I have a problem. A week ago I dropped my hd2 and the screen was smashed. I took it to the service and they replaced the digitizer. Now, as it turned out the lcd displays badly and the say it has to also be replaced. I know that after the drop the lcd worked fine. Now it looks like this: http://img857.imageshack.us/i/imag0001u.jpg
My question is - is this broken lcd? it has to be removed? or can I do something with it? is it the fault and they've done something wrong?
Thanks for answers.
Click to expand...
Click to collapse
Unless they just haven't connected the LCD properly (very unlikely), there's definitely a problem with it... I'm afraid I think it'll have to be replaced.
in turkey if there is a digitizer problem they change the whole screen.
Under the TMOUS warranty they will replace your phone if an issue comes up like that because it's usually just an unlucky roll of the dice if your LCD does that.
because your problem seems to occur after a mechanical shock, i would suspect 2 scenarios.
1. You have a bad connection between the display flex connector and phone's motherboad. This can either be caused by motherboard display connector failure, some small pins on that connector got busted when the phone was either dropped or once the digitizer was changed. I give pretty small chances for this to have happened.
2. If you see a phone lcd stripped down of it's housing, you will notice that on the bottom part of it (or lateral one on some displays) you can see a flex cable coming from the display's glass-like surface to the back of it. It sits pretty tight around one edge of the screen. It connects the TFT matrix to the processing part (column&row controllers) on the back of the display (or on the flex cable/phone motherboard .. ). If a phone is hit from one side, the case and display housing can press hard on this flex cable and break it, or puncture it. In this case, some of the signals needed to drive some specific areas of the tft matrix aren't getting to the matrix itself so you see some lines on the screen (plus color rendering errors). Sometimes, improper manipulation of the screen when assembling back the phone can also cause the problem.
I give more chances to this scenario.
If number 1 could be fixed by a simple phone disassemble and connector checking, number 2 will indeed require a new display as there isn't any way to service that broken flex cable.
My previous posts about display problems tried to focus on "naturally occurring" problems, not ones induced by electric/mechanical shocks. So in this case, my above scenarios will be more suited as likely suspects for your problem.
So a few months back I'd had my digitizer replaced and recently I noticed that it was collecting dust so in a wrong move! I decided to disassemble and clean it!
I faced some difficulties disassembling the main board and I think I've damaged the LCD while doing that! after putting everything back together I noticed that the top half of the display shows distorted colors , I've attached some photos.
Now my question is that if you guys believe it is a damaged LCD or some other parts and If so is there any way to fix it without replacing the LCD?
thank you very much in advance
-Bahador
Next time don't do it by yourself. Anyway, I think you didn't assemble it properly, try to disassemble it again and assemble it properly. If still doesn't work go to your manufacturer.
thank you for your response, can you be more specific please? do you think it's the LCD's cable? cause I was no able to detach it in the first place
Bad news...
110% your lcd is damaged/faulty.
Replacing it is the only solution, but don't do it yourself, it seems like you just don't have the right skills for that!