i flashed NexusHD2-JellyBean-CM10.1_V2.4 rom on HD2 using native SD method,everything worked and when it rebooted the logo kept on the start screen for some time atleast 30minute before i pulled out the battery,is that rom not working?then flashed same rom but V2.2 and this time it booted up in 10minute but its some what slow,which i read in the comments as well,which version of jellybean will be good to go then?
also i used a 2gb sd card,i kept half of it for sd storage n other half for apps as ext4 internal storage but when i checked storage it showed only 114mb free out of some 845mb,where is rest of the memory gone?there are not much default apps to take up all the space?
also whenever i try to install facebook app,it says not enough memory/storage but when i install other apps they work fine,i even tried downloading .apk offline,moved to sd and installed but same error,the other half as sd storage still has good 745mb free
if i need to install games or more apps,they will install on internal memory or on sd card,does this means i can not install big games?
also whenever i try to play HD movies,they stuck alot,maybe they'll work fine on some custom rom having 720p playback option?
i don't know much about flashing,so far i have only used nand flash using cwm and native sd for this
Thankyou for your time..
try full formatting the sd card and repartition it ... ( primary fat32 and primary ext4)
try flashing rom using nand method and immediately flash this patch after it ...
this method is very good and very fast ...
and the best rom of between newest roms is NexusHD2 CM10.1.2 v2.6
i think problem with NativeSD because of your memory ext partition
mosi hd2 said:
try full formatting the sd card and repartition it ... ( primary fat32 and primary ext4)
try flashing rom using nand method and immediately flash this patch after it ...
this method is very good and very fast ...
and the best rom of between newest roms is NexusHD2 CM10.1.2 v2.6
i think problem with NativeSD because of your memory ext partition
Click to expand...
Click to collapse
i did formatted it first then i used MiniTool Partition Wizard to make 2 primary partitions,one as fat n other as ext4 and then i flashed it using native sd from MAGLDR
for NAND flash i had been using CWM which has options of 150 250 n 400mb partitions,now if i want to use 2gb card,half for both like before,i'll use same application to make partition but then can you tell me how to flash this rom using nand?
i mean i know one way is CWM and other is that i can use usb flasher which i never used but for that i need to execute DAF but whenever i unzip a rom,i dont see any DAF file,n also how to flash this file which you suggested.
with the current rom,i have only 64mb left for internal memory out of 900mb ext4 partiton that i made :S
and whenever it tried to update any app,it says not enough space
now i remember,this was also one way to select internal storage size
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
but what is CWM partition for?if i select 1gb from 2gb for apps,then 1gb is left for music etc but CWM space is for rom then? or should i just skip it then
i am confused now,if this is not for internal storage then what is this space for? also how much cwm size should be selected n how much space does rom takes?
so i'll go with this latest rom
thank you for your help again.
chaudhary9 said:
i did formatted it first then i used MiniTool Partition Wizard to make 2 primary partitions,one as fat n other as ext4 and then i flashed it using native sd from MAGLDR
for NAND flash i had been using CWM which has options of 150 250 n 400mb partitions,now if i want to use 2gb card,half for both like before,i'll use same application to make partition but then can you tell me how to flash this rom using nand?
i mean i know one way is CWM and other is that i can use usb flasher which i never used but for that i need to execute DAF but whenever i unzip a rom,i dont see any DAF file,n also how to flash this file which you suggested.
with the current rom,i have only 64mb left for internal memory out of 900mb ext4 partiton that i made :S
and whenever it tried to update any app,it says not enough space
now i remember,this was also one way to select internal storage size
but what is CWM partition for?if i select 1gb from 2gb for apps,then 1gb is left for music etc but CWM space is for rom then? or should i just skip it then
i am confused now,if this is not for internal storage then what is this space for? also how much cwm size should be selected n how much space does rom takes?
so i'll go with this latest rom
thank you for your help again.
Click to expand...
Click to collapse
first, go to Setting > App and look at the total internal storage size ... if it is lower than your ext4 partition, then you installed rom with nand method ( no nand with DataOnExt or nand with extra patches. then ext partition is Inefficient )
for your problem, i suggest you that install rom with clk method ...
Here is the step-by-step guide to do it
1- create 1024MB Ext4 (primary) with minitool partition ( guide . sorry for its language it's persian but it's not unclear )
2- power off hd2
3- hold Volume- and power button ( It will load into ‘Red, Green, Blue and White’ screen bootloader )
4- hspl 2.08 (in RGBW screen ) - download
5- task29 (in RGBW screen ) - download
6- radio 2.12 or 2.15 (in RGBW screen ) - download
7- back clk (in RGBW screen ) - download
8- now, your phone will boot up into android bootloader (a black page) . go to "setting" > "resize partition" and set a partition table that match with your rom.
9- press back button and go to recovery .
10- full wipe ( press wipe "data/factory reset", "wipe cache partition" , battery and dalvike (in advenced) )
11- now install zip form sd-card ( i recommend install NexusHD2 CM10.1.2 v2.6 with DataOnExt method ) ...
12- reboot
13- enjoy
mosi hd2 said:
first, go to Setting > App and look at the total internal storage size ... if it is lower than your ext4 partition, then you installed rom with nand method ( no nand with DataOnExt or nand with extra patches. then ext partition is Inefficient )
for your problem, i suggest you that install rom with clk method ...
Here is the step-by-step guide to do it
1- create 1024MB Ext4 (primary) with minitool partition ( guide . sorry for its language it's persian but it's not unclear )
2- power off hd2
3- hold Volume- and power button ( It will load into ‘Red, Green, Blue and White’ screen bootloader )
4- hspl 2.08 (in RGBW screen ) - download
5- task29 (in RGBW screen ) - download
6- radio 2.12 or 2.15 (in RGBW screen ) - download
7- back clk (in RGBW screen ) - download
8- now, your phone will boot up into android bootloader (a black page) . go to "setting" > "resize partition" and set a partition table that match with your rom.
9- press back button and go to recovery .
10- full wipe ( press wipe "data/factory reset", "wipe cache partition" , battery and dalvike (in advenced) )
11- now install zip form sd-card ( i recommend install NexusHD2 CM10.1.2 v2.6 with DataOnExt method ) ...
12- reboot
13- enjoy
Click to expand...
Click to collapse
i added up internal storage n sd storage,all adds up to 1.8gb,but internal storage shows 754mb used :S
went to storage,it shows total internal storage as 845mb,available 62mb n apps using 188mb n where is rest of it
anyways i'll try the procedure suggested by you
if i create 1024mb ext4 partition then should i leave the rest as fat by splitting the storage as ext4 n fat32 or just format whole sd card and just partition 1024 as ext4
saw the pdf,i think first i just resize to free up 1024mb then create partition of it then format it n then apply
i tested it without applying,there is no format option for newly created partition so it means i'll format the other space which is old one?
rest will stay as it is
i has hspl n radio,no task 29 done by me ever,but i think i need to start from first step1 again
how much space to partition for the rom v2.6 one?like if zip is 204mb so that much space or space that it will take after unzip
n u mentioned something in 11th step,i dont know what does this means:
" with DataOnExt method"
btw can we flash any rom using nand,i thought only nand roms can be flashed by nand n specific ones for native sd,like there is one miui rom,when i flash it using nand cwm or native sd,it asks if you want to flash using nand or sd with ext,either way after flashing it,it says change boot to native sd at end but htc logo disappears,screen becomes blank at reboot and nothing shows up,rom name is "miuiandroid_hd2_jb-3.6.28"
thanks for your help :good:
chaudhary9 said:
i added up internal storage n sd storage,all adds up to 1.8gb,but internal storage shows 754mb used :S
anyways i'll try the procedure suggested by you
if i create 1024mb ext4 partition then should i leave the rest as fat by splitting the storage as ext4 n fat32 or just format whole sd card and just partition 1024 as ext4
saw the pdf,i think first i just resize to free up 1024mb then create partition of it then format it n then apply
rest will stay as it is
i has hspl n radio,no task 29 done by me ever,but i think i need to start from first step1 again
how much space to partition for the rom v2.6 one?like if zip is 204mb so that much space or space that it will take after unzip
thanks for your help :good:
Click to expand...
Click to collapse
destroy all partitions on your sd.
now create 1GB primary fat32 and 1GB primary Ext4 like guide.now you have a ext partition for apps and fat32 partition for data and it's good
Code:
285mb for minimum
320mb for full
mosi hd2 said:
destroy all partitions on your sd.
now create 1GB primary fat32 and 1GB primary Ext4 like guide.now you have a ext partition for apps and fat32 partition for data and it's good
Code:
285mb for minimum
320mb for full
Click to expand...
Click to collapse
thanks
i'll try this today
btw besides space issue,this rom is quite slow n one new issue that whenever some one calls,there is no volume for ringtone though vibration works fine,i hope this issue gets resolved in next rom too
u mentioned something in 11th step,i dont know what does this means:
" with DataOnExt method"
can you explain this?
also can we flash any rom using nand,i thought only nand roms can be flashed by nand n specific ones for native sd,like there is one miui rom,when i flash it using nand cwm or native sd,it asks if you want to flash using nand or sd with ext,either way after flashing it,it says change boot to native sd at end but htc logo disappears,screen becomes blank at reboot and nothing shows up,rom name is "miuiandroid_hd2_jb-3.6.28"
thank you for your help and time :good:
chaudhary9 said:
thanks
i'll try this today
btw besides space issue,this rom is quite slow n one new issue that whenever some one calls,there is no volume for ringtone though vibration works fine,i hope this issue gets resolved in next rom too
u mentioned something in 11th step,i dont know what does this means:
" with DataOnExt method"
can you explain this?
also can we flash any rom using nand,i thought only nand roms can be flashed by nand n specific ones for native sd,like there is one miui rom,when i flash it using nand cwm or native sd,it asks if you want to flash using nand or sd with ext,either way after flashing it,it says change boot to native sd at end but htc logo disappears,screen becomes blank at reboot and nothing shows up,rom name is "miuiandroid_hd2_jb-3.6.28"
thank you for your help and time :good:
Click to expand...
Click to collapse
slow?
nexus v2.6 is very fast and smooth ... :laugh:
and low sound on ringtones is bug of most 4.1+ roms that it fixed somewhat by tytung ( low sound fixer )
nand with dataonext is a installation method which allow you to use ext partition as internal storage ... and install more apps ...
During installation of the ROM in one step, you have to choose between "Nand", "Nand with DataOnExt","NativeSD" and i would recommend nand with dataonext
mosi hd2 said:
slow?
nexus v2.6 is very fast and smooth ... :laugh:
and low sound on ringtones is bug of most 4.1+ roms that it fixed somewhat by tytung ( low sound fixer )
nand with dataonext is a installation method which allow you to use ext partition as internal storage ... and install more apps ...
During installation of the ROM in one step, you have to choose between "Nand", "Nand with DataOnExt","NativeSD" and i would recommend nand with dataonext
Click to expand...
Click to collapse
thanks for in time reply
i was reading this thread and thought that i'd have to do all steps in post 2 for dataonext,thats a relief
http://forum.xda-developers.com/showthread.php?t=1843062
btw do i have edit flash.cfg file to make partition of 285mb size as normally it would either be 250 or 400mb
i saw this on forum but it was for 200mb:
Code:
misc ya 1M
recovery rrecov|ro|nospr 5M cwm_recovery_leo.img
boot yboot|ro 5M
system ya 200M
cache ya 2M
userdata ya|asize|hr allsize
what changes should i do to make it 285mb as i saw on his forum that full version requires 285 n min 200mb
just change system from 200 to 285 with no change in others?
for 400mb it was like this
Code:
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 5M
system ya 400M
cache ya 4M
userdata ya|asize|hr allsize
but since i'll use clk to partition so i think i wont have this option right?
dont want to make 400mb space when it requires alot less as that will eat up space for apps i think.
i thought even normal flash like native sd also used internal storage for apps etc,i think current rom v2.2 is slow for me because of sd card having class 4.
chaudhary9 said:
thanks for in time reply
i was reading this thread and thought that i'd have to do all steps in post 2 for dataonext,thats a relief
http://forum.xda-developers.com/showthread.php?t=1843062
btw do i have edit flash.cfg file to make partition of 285mb size as normally it would either be 250 or 400mb
i saw this on forum but it was for 200mb:
Code:
misc ya 1M
recovery rrecov|ro|nospr 5M cwm_recovery_leo.img
boot yboot|ro 5M
system ya 200M
cache ya 2M
userdata ya|asize|hr allsize
what changes should i do to make it 285mb as i saw on his forum that full version requires 285 n min 200mb
just change system from 200 to 285 with no change in others?
for 400mb it was like this
Code:
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 5M
system ya 400M
cache ya 4M
userdata ya|asize|hr allsize
but since i'll use clk to partition so i think i wont have this option right?
dont want to make 400mb space when it requires alot less as that will eat up space for apps i think.
i thought even normal flash like native sd also used internal storage for apps etc,i think current rom v2.2 is slow for me because of sd card having class 4.
Click to expand...
Click to collapse
thanks dear
according to saying the cooker of this rom, 200MB for minimum but experience has shown that more size for system partition (also for other especially system and cache) is better.
for change partition, go to bootloader (back button with power) , go to "setting" > "resize partitions" and set partition table ( misc=1M ,recovery=5M ,boot=5M, system=(285M min and 315 full) ,cache=(2M or 3) )
if you have sd card with high class, it's better to install rom with NativeSD ...
and really 2.2 and 2.6 are far apart ... 2.6 is so faster
mosi hd2 said:
thanks dear
according to saying the cooker of this rom, 200MB for minimum but experience has shown that more size for system partition (also for other especially system and cache) is better.
for change partition, go to bootloader (back button with power) , go to "setting" > "resize partitions" and set partition table ( misc=1M ,recovery=5M ,boot=5M, system=(285M min and 315 full) ,cache=(2M or 3) )
if you have sd card with high class, it's better to install rom with NativeSD ...
and really 2.2 and 2.6 are far apart ... 2.6 is so faster
Click to expand...
Click to collapse
thanks
back button with power while phone is on or when its off?
also i have to do this before flashing or during which step?
i still couldnt get it about native SD,if class is higher then after flashing rom will be faster?
i'll take out the sd card format,partition,transfer the new rom n then put it back in,though clk may have usb storage option like magldr had,but still i cant format sd card while rom is running on it i guess
native SD or nand,how they effect anything,for sd i get it thats its something to do with memory card,nand maybe with internal storage
thank you for all your help
you have been very patient with all my so many questions/
mosi hd2 said:
8- now, your phone will boot up into android bootloader (a black page) . go to "setting" > "resize partition" and set a partition table that match with your rom.
Click to expand...
Click to collapse
or i think i just have to select 315mb in this step instead of going into bootloader with back button and power ?
EDIT
tried back button with power before doing anything,it loaded into magldr
thanks guy
chaudhary9 said:
thanks
back button with power while phone is on or when its off?
Click to expand...
Click to collapse
when its off
chaudhary9 said:
also i have to do this before flashing or during which step?
i still couldnt get it about native SD,if class is higher then after flashing rom will be faster?
Click to expand...
Click to collapse
set partition table before flashing ...
if class is higher, rom is very very faster ...
chaudhary9 said:
or i think i just have to select 315mb in this step instead of going into bootloader with back button and power ?
EDIT
tried back button with power before doing anything,it loaded into magldr
Click to expand...
Click to collapse
if you installed clk after hspl! ask29! & radio! , you shouldn't see magldr ...
please follow guide step by step
mosi hd2 said:
thanks guy
when its off
set partition table before flashing ...
if class is higher, rom is very very faster ...
if you installed clk after hspl! ask29! & radio! , you shouldn't see magldr ...
please follow guide step by step
Click to expand...
Click to collapse
i followed all the steps,it was very easy but after rebooting at the end,it boots in recovery?
with magldr there used to be an option of boot nand but there no such thing for clk so whats wrong here?
also you said rom is very fast with higher class,is that for native sd only or that works for nand with dataonext as well?
when i was flashing it,it showed me internal storage sd space etc all correct where as when i was flashing with native sd it showed me few of them as -1 so i guess everything worked well except for not booting v2.6 rom
mosi hd2 said:
thanks guy
when its off
please follow guide step by step
Click to expand...
Click to collapse
i have flashed it thrice already following all steps,i noticed that its T mobile so i flashed with just nand only as well but every time it boots into recovery
how much memory card size can hd2 easily handle and can it play hd videos n big hd games without getting stuck,otherwise getting more size card wont be of much use which i was considering n as well as class 10
EDIT
so i got tired and i repeated all steps but with magldr this time,modified space for CWR
n this time it worked
though what i observed when i was flashing with clk i was getting this,even though i set partition of system to 315 3 times
system nand 150mb
free 149
data nand 767mb
free 765
and then with magldr
i got this
sys nand 315mb
free 315
data nand 605mb
free 604
maybe this was the fault,clk wasnt changing system partition and so it wasnt booting
this rom is working great
but market says no connection even though its connected to wifi started working after reboot,relief
internal storage shows 0.93gb total with 753 available 125 for apps,seems some is lost somewhere but atleast its showing most of it,yay
when i making partitions and formatted,applied,it showed some 67mb used from 1024
Did you success to install the rom?
mosi hd2 said:
Did you success to install the rom?
Click to expand...
Click to collapse
yea its working fine
i edited my last post,maybe you didn't saw that
but its working magldr n cwr,didnt worked with clk maybe because it couldnt partition system
chaudhary9 said:
yea its working fine
i edited my last post,maybe you didn't saw that
but its working magldr n cwr,didnt worked with clk maybe because it couldnt partition system
Click to expand...
Click to collapse
good
but clk works fine.
mosi hd2 said:
good
but clk works fine.
Click to expand...
Click to collapse
i dont know i tried 3 times,every time i set partition of system to 315 but while flashing it showed system nand as 150mb but when using cwr it showed it as full 315mb
chaudhary9 said:
i dont know i tried 3 times,every time i set partition of system to 315 but while flashing it showed system nand as 150mb but when using cwr it showed it as full 315mb
Click to expand...
Click to collapse
note: after setting partition table, you must commit change ... then clk will reboot after it
:good:
Related
Hello,
Sorry if this has been already asked but I couldn't find the answer using the search tool
I've just bought my HD2 today and tried the NAND method
Everything worked fine but whatever ROM I flash, I only have 7.25 Mb of internal storage available
I thought it wouldn't matter since I have a 32 Gb sd card and set the install location to it but I nevertheless get the "Not enough storage" message when trying to download an app from the market
Can you please tell me where I went wrong ?
Thanks
You likely have a EU HD2 512 and have installed a ROM for a US HD2 1024. Read the build threads before flashing.
Thanks for your reply
The link you provided is the guide I used : flashed 2.08.HSPL, then MAGDLR and finally updated the radio to 2.15.50.14
I then installed this ROM with CWM : http://forum.xda-developers.com/showthread.php?t=933951 . It's not mentionned whether it's for 512 or 1024
Did you mean I didn't use the right file while preparing the device or just the ROM ?
Thanks
OK, now I understand what you mean. There's a Desire HD Rom that says 47 mb left after first boot and that's exactly what I got after flashing it
I guess I'll just need a Gingerbread ROM that will leave enough space left after flashing on a Leo 512
If you have suggestions, because the 3 ones I tried so far left less than 10 mb after first boot =(
The one I would recommend would leave only 46 MB after install.
rahan95 said:
OK, now I understand what you mean. There's a Desire HD Rom that says 47 mb left after first boot and that's exactly what I got after flashing it
I guess I'll just need a Gingerbread ROM that will leave enough space left after flashing on a Leo 512
If you have suggestions, because the 3 ones I tried so far left less than 10 mb after first boot =(
Click to expand...
Click to collapse
Hmmm, since you have the 512 version, I suggest making an ext 2/3/4 partition on your sd card to use app2sd+ or data2sd. so when you stall some apps, they go into the partition and not your internal storage. (the ext2/3/4 is a way to trick your phone into thinking that partition in your sd card is your internal storage)
Use the built-in advanced function in ClockworkMod Recovery to help create ext3 partition on your SD card. but you need to get ClockworkMod Recovery installed first…
Step by Step Guide
1. Backup your SD card data to PC before start partitioning.
2. Power on your phone and don’t let go power button.
3. DFT MAGLDR Bootloader will be loaded.
4. Press call button to load 1. Boot AD SD.
5. ClockworkMod Recovery will be loaded then.
6. Use volume down button to go down to ‘advanced’.
7. Then press call button.
8. Select ‘Partition SD Card’.
9. Select the ext size that you want (128M, 256M, 512M, 1024M, 2048M or 4096M).
10. Select 0M as the Swap Size.
11. Copy back your data to SD card.
12. That’s all.
CLICK ThankS
@rahan95
But the rom, you've mentioned - TyphooN CyanogenMod - is Gingerbread and should have left you much more than 100MB free on Int HD2 (I'm sure of it, because it's the one I'm using now myself and right now have 98MB free after installing few apps).
Check, if you've flashed with right settings for CWM - author of the ROM suggest 135M System/44M Cache.
Thanks for your replies
Coldest : I do have CWM instaleld since it's what I used to flash the roms. But it's on the Nand, not on the SD. Therefore, booting on AD SD doesn't work. Should I reinstall it but on the SD this time ?
Adecostres : I used this topic for installing CWM : http://forum.xda-developers.com/showthread.php?t=898913
i flashed the 400MB thinking bigger was better but this may be wrong ?
Thanks again
With TyphooN's ROM, you should use this CWM (link from his thread): http://www.multiupload.com/5VH6M9XM8B
You will have 135M system / 44 Cache and more than 120M free space after flashing.
In this case bigger is NOT better - using bigger system part, you will have less space for apps
THanks a lot
I'll try that ASAP and will let you know !
It worked ! I have 229 Mb available after first boot =)
Thank you so much for your help !
Glad to hear
Today I was updating my android rom (one of the first nands) and I've updated magldr and installed CWM.
Then I installed a new rom with CWM and after reboot he keeps showing the bootscreen of the rom, I've tried another rom and it's the same...
Can anybody help me?
The most common reason for being stuck at bootscreen is improper partition size. You sure you got that right?
I've taken the largest partition size (400mb)...
you don't take the largest, but rather the most suitable. (or the one stated in the rom's thread) you should also take into consideration whether the rom NEEDS sd-ext or not.
What rom do you want to use/upgrade?
Have you met the requirements? (sd-ext/system partition/cache/radio)
I've a EU 512mb HTC HD2. I don't know my rom anymore that I used but I think its a darkforce froyo rom...
I've parted my sd with cwm: 1024ext, 64mb swap and used the 400mb CWM
Now I want to install the Runnymede 3.5 or the Desire HD 3.06.405.1 - Sense 3.0 - Android 2.3.5 [v1.4][RAFPIGNA 1.9GB], i don't know which one is better...
link to those roms please?
http://forum.xda-developers.com/showthread.php?t=1275119
and
http://forum.xda-developers.com/showthread.php?t=1264828
okay for the first one (runnymede) you need 6/200/8. that means 200mb system partition, 6 boot partition and 8 cache partition. AND A 1GB SD-EXT
And for the second one you need 5/155/5. which means 155mb system partition and 5 megs for both cache and boot. AND YOU NEED 1GB SD-EXT.
Neither of these ROMs will run under a 400mb system partition ~!
And remember, always wash your hands and wipe your phone/sd before attempting another rom
Marvlesz said:
okay for the first one (runnymede) you need 6/200/8. that means 200mb system partition, 6 boot partition and 8 cache partition. AND A 1GB SD-EXT
And for the second one you need 5/155/5. which means 155mb system partition and 5 megs for both cache and boot. AND YOU NEED 1GB SD-EXT.
Neither of these ROMs will run under a 400mb system partition ~!
And remember, always wash your hands and wipe your phone/sd before attempting another rom
Click to expand...
Click to collapse
Thank you very much, I'll try it ...
And does anyone know wath's the better rom of this 2?
Marvlesz said:
okay for the first one (runnymede) you need 6/200/8. that means 200mb system partition, 6 boot partition and 8 cache partition. AND A 1GB SD-EXT
And for the second one you need 5/155/5. which means 155mb system partition and 5 megs for both cache and boot. AND YOU NEED 1GB SD-EXT.
Neither of these ROMs will run under a 400mb system partition ~!
And remember, always wash your hands and wipe your phone/sd before attempting another rom
Click to expand...
Click to collapse
Can some1 explain how i change those setting? I want the same rom (runnymede) but it stays stuck in the bootloader screen
*I change the Sd-ext part. in 1024 but how do i change the 200 mb settings and the 6 boot part.?
Slagers said:
Can some1 explain how i change those setting? I want the same rom (runnymede) but it stays stuck in the bootloader screen
*I change the Sd-ext part. in 1024 but how do i change the 200 mb settings and the 6 boot part.?
Click to expand...
Click to collapse
If you're using the old method, then look for a file called config.cfg, edit that using any file editor.
But if you're using the NAND Toolkit, you can edit them by selecting the desired partition from the panels on the left or the right, depending on your bootloader, and the cache is just right below those panels.
Marvlesz said:
If you're using the old method, then look for a file called config.cfg, edit that using any file editor.
But if you're using the NAND Toolkit, you can edit them by selecting the desired partition from the panels on the left or the right, depending on your bootloader, and the cache is just right below those panels.
Click to expand...
Click to collapse
can you give me more info please. I dont use the Nand toolkit were can i download it because all download links are down for the HD2 Toolkit. I dont now what file you mean
Slagers said:
can you give me more info please. I dont use the Nand toolkit were can i download it because all download links are down for the HD2 Toolkit. I dont now what file you mean
Click to expand...
Click to collapse
You'll find it here:
http://www.mediafire.com/?881bpw2xer88h23
Hi, I dont know, where fail me, please can you help me? Sorry if I write in bad section.
I want install this ROM to HTC HD2: http://forum.xda-developers.com/showthread.php?t=1348922 I found step by step guide, and stuck at at instal magldr 1.13 recovery, I solved that, and next step was instal CLK 1.5. ok, after reboot I get to android recovery menu. I copy ROM to root SDcard a over recovery menu installed , by instal asked me at wipe (I gave wipe) next ask was version EU vs US t-mobile verzi (EU option get error. US-tmobile get install ROM) last ask was magldr or CLK installed, I installed at last CLK so choiced CLK.. on LCD I saw install complete, you may reboot, and may take 15 minutes. I saw HTC logo, but after 35 minutes in stuck htc logo, I powered off and find help. can you help me, where I failed? THX and sorry for my bad english
Follow the guide in my signature, either you followed a very bad guide or (more likely) you misunderstood a lot of it because of the language barrier. This is an outline of the steps you should be taking:
1. Install HSPL
2. Install a compatible radio
3. Install MAGLDR
4. Install CWM with the correct system partition size for your chosen ROM
5. Partition your SD card for A2SD (optional)
6. Install the ROM
7. Install any extra features you want.
Good luck
Nigeldg said:
...
4. Install CWM with the correct system partition size for your chosen ROM
5. Partition your SD card for A2SD (optional)
...
Click to expand...
Click to collapse
THX for reply. I think error is in 4 and 5 steps. I found this informations "system size 5/145/5 MB". Mean it I must edit flash.cfg in MAGLDR_CWR_5.0.2.6? at
misc ya 1M
recovery rrecov|ro|nospr 5M recovery_leo.img
boot yboot|ro 5M
system ya 145M
cache ya 5M
userdata ya|asize|hr allsize
??
HOLAS13 said:
THX for reply. I think error is in 4 and 5 steps. I found this informations "system size 5/145/5 MB". Mean it I must edit flash.cfg in MAGLDR_CWR_5.0.2.6? at
misc ya 1M
recovery rrecov|ro|nospr 5M recovery_leo.img
boot yboot|ro 5M
system ya 145M
cache ya 5M
userdata ya|asize|hr allsize
??
Click to expand...
Click to collapse
That is correct, yes, however you must also partition your SD card if you have an EU HD2 as some apps will be installed to the EXT partition of the SD. You can either do this on a PC or in CWM (see the guide in my signature for this).
Nigeldg said:
... if you have an EU HD2 ...
Click to expand...
Click to collapse
How can I check if I have EU or TMOUS (this is not my phone, so I dont know it)? I am installing TMOUS, because EU install get error. and must I EXT partition creat in SD with TMOUSE? big thanks
A TMOUS HD2 will have the T-Mobile logo on the top of the phone, a red end call button and a green call button. I think that you may still need to create an EXT partition for the TMOUS one as well, now that I've had a look at the ROM.
I changed touch screen, so mabye only check button ok I think I have EU version, so I need EXT part? can you any PC tools recommend me? I think by CWM not work :/ or its possible it take format 8gb card 1 hour? I see only partitioning SD card... please wait... but really I see it 1 hour :/
HOLAS13 said:
I changed touch screen, so mabye only check button ok I think I have EU version, so I need EXT part? can you any PC tools recommend me? I think by CWM not work :/ or its possible it take format 8gb card 1 hour? I see only partitioning SD card... please wait... but really I see it 1 hour :/
Click to expand...
Click to collapse
Yeah, it shouldn't take an hour so it's clearly not working properly in CWM. I'd recommend using EaseUS Partition Manager, it's fairly user friendly. I don't know about the language settings though, hopefully it'll work for you.
I must be idiot :/ still nothing I formated SD card with primary partition FAT32 capacity 6,5 GB and 1 logical partition EXT (I tried EXT2 and EXT3), but If I try install EU version, by step "mount sd-ext" get error E:error name_rom.zip (status 0) isntall aborted. Any ideas? THX
OK, I choosed another ROM and it work BIG THANK TO Nigeldg
if you have questions or problems with rom
post them here not in the rom thread
failure to add the info below will result in your question not being answered untill you add the below info to your post
when posting about a problem please include which install you used [nand, dataonext or nativesd]
which bootloader you are using [clk or magldr]
and what partition size you used if its a nand or dataonext install
and any relevant information you can think of ::: for instance..[i installed poweramp and my problem started
this is a small tutorial on how i flash this rom
first off i have a 430 system partiton and a 4 gig ext 4 partition
i also use Kokotas black clk 1.5.1.9 and CWM Recovery Touch Beta 8 Release Candidate 1
and i use the dataonext install method
first thing i do is do a backup of the rom i have on my phone
then i move the rom zip to my sdcard
i then go into mounts and storage and
format boot
format cache
format data
format system
format sd-ext
be carefull not to format sdcard
i then got into install zip from sd card then choose zip from sdcard
then i pick the rom zip and and go thru the setup on aroma and choose the things i want to install
when it finishes i reboot and let it sit at the lockscreen for 5 minutes
then i go thru the setup and add my gmail account
when its done with the setup stuff i once again let the phone sit for 5 minutes
then i reboot one more time and begin fully setting up the phone the way i like it
i add alot of modded stuff to my phone for testing and regular use
and the way i posted above has never failed me
link for CWM Recovery Touch Beta 8 Release Candidate 1
http://forum.xda-developers.com/showthread.php?t=1419733
link to kokotas blk clk
http://www.mediafire.com/?tzg7whl9wwaih
Hi Pixeldroid.
It is an awesome rom again. But I have again huge battery drain. And I saw that most is due to Google Services. Now my battery is in 5 Hours from 100% full to 25% empty. Google services is taking 42% of battery drain. Is it possible to shutdown Google services? I have allready did the following: Settings/ Accounts/ Google/ Accounts Sync OFF.
I found where to stop Google services, but I don't know if it wil give me problems with the rom.
Settings/ Apps/Active now/ Google services
I have stopped them all and wil see what happens.
re
Kajoe said:
Hi Pixeldroid.
It is an awesome rom again. But I have again huge battery drain. And I saw that most is due to Google Services. Now my battery is in 5 Hours from 100% full to 25% empty. Google services is taking 42% of battery drain. Is it possible to shutdown Google services? I have allready did the following: Settings/ Accounts/ Google/ Accounts Sync OFF.
I found where to stop Google services, but I don't know if it wil give me problems with the rom.
Settings/ Apps/Active now/ Google services
I have stopped them all and wil see what happens.
Click to expand...
Click to collapse
for me is the battery drain good. have you change the display settings?
pixelfreak
thanks for great job
Navitel V 5 works with this ver of rom ?
very nice rom
cheers!
Hello to all
I am on Data on ext .My sd(class6 samsung) is an 2gb ext3 and 14gb fat 32 ( formatet with touch recovery,also tryed with ext4 made with minitool partition wizard same issue came))
I also use clk 1,5,0 rc1
My layout is big enough i think.
recovery 7mb
misc 3 mb
boot 7 mb
system 370 mb
cache 7 mb
userdata 27 mb
If i put in my sim card always after pin the message apperars "com.android.phone" stopped and i have to write my pin again.
I can not use my phone. Every 5 seconds this message appears.
Can you please help me?
sincerealy
Mr.NeoTrinity said:
Hello to all
I am on Data on ext .My sd(class6 samsung) is an 2gb ext3 and 14gb fat 32 ( formatet with touch recovery,also tryed with ext4 made with minitool partition wizard same issue came))
I also use clk 1,5,0 rc1
My layout is big enough i think.
recovery 7mb
misc 3 mb
boot 7 mb
system 370 mb
cache 7 mb
userdata 27 mb
If i put in my sim card always after pin the message apperars "com.android.phone" stopped and i have to write my pin again.
I can not use my phone. Every 5 seconds this message appears.
Can you please help me?
sincerealy
Click to expand...
Click to collapse
where did you come up with userdata 27 mb
Kameirus said:
where did you come up with userdata 27 mb
Click to expand...
Click to collapse
Hello Kameirus
First ,thanks for replying )
I dont know where the 27 mb of userdata came from??
In the clk 1.5.0.1 there is no option under settings to change that. I only have the options
recovery ,misc,boot,cache and system.
sincerealy )
Mr.NeoTrinity said:
Hello Kameirus
First ,thanks for replying )
I dont know where the 27 mb of userdata came from??
In the clk 1.5.0.1 there is no option under settings to change that. I only have the options
recovery ,misc,boot,cache and system.
sincerealy )
Click to expand...
Click to collapse
how did you install clk on your phone
do you have a tmobile hd2 if yes can you bump up the system partition size to 400 or 410 and see what happens
i always use a 410 size
Kameirus said:
how did you install clk on your phone
do you have a tmobile hd2 if yes can you bump up the system partition size to 400 or 410 and see what happens
i always use a 410 size
Click to expand...
Click to collapse
Hello )
I did the clk install via an custom .ruu .
I am honest. I forgott what kind it is. Its so long ago that i changed from wimo 6.5 to android. About 3 years.
I can say two things about it. It is an German one and the original vodafone rom is not allow when i try to install it.
So the chance is well to an Tmobile phone.
Sorry for my bad englisg. I will try my best.
sincerealy
Thanks of course for reply !
re
Mr.NeoTrinity said:
Hello Kameirus
First ,thanks for replying )
I dont know where the 27 mb of userdata came from??
In the clk 1.5.0.1 there is no option under settings to change that. I only have the options
recovery ,misc,boot,cache and system.
sincerealy )
Click to expand...
Click to collapse
make your phone comlete new with the tools from my first post.
- new HSPL
- new bootloader with recovery and cache
it may be that you have an outdated version of HSPL on your phone. or have you ever been something changed on your phone? sorry i did not read all your posts
pixelfreak
-pixelfreak- said:
make your phone comlete new with the tools from my first post.
- new HSPL
- new bootloader with recovery and cache
it may be that you have an outdated version of HSPL on your phone. or have you ever been something changed on your phone? sorry i did not read all your posts
pixelfreak
Click to expand...
Click to collapse
Hello
hanks for helping.
I tryed with hspl 2.08 and 3.03. I always used since release the clk 1.5.0.1 rc1.
With "the tools from your post " ,do you mean the hd2 toolkit or something else?
sincerealy
re
Mr.NeoTrinity said:
Hello
hanks for helping.
I tryed with hspl 2.08 and 3.03. I always used since release the clk 1.5.0.1 rc1.
With "the tools from your post " ,do you mean the hd2 toolkit or something else?
sincerealy
Click to expand...
Click to collapse
yes. i work only with the HD2 Toolkit and MiniToolPartition Wizard Home Edition and i have no problem.
make for me a step by step list from your install and your sizes from recovery and cache. write me all your settings in the install tools
pixelfreak
-pixelfreak- said:
yes. i work only with the HD2 Toolkit and MiniToolPartition Wizard Home Edition and i have no problem.
make for me a step by step list from your install and your sizes from recovery and cache. write me all your settings in the install tools
pixelfreak
Click to expand...
Click to collapse
Hello
Yes of course.
1 task 29
2 flash custom.ruu (the clk 1.5.0.1rc1
3 Make Partitions like below
recovery 7mb
misc 3 mb
boot 7 mb
system 370 mb
cache 7 mb
userdata 27 mb ( i cant change that value anywhere)
4 boot into cwm
5 format boot,cache,system and ext partition
6 switch off
7 put in sd 16 gb (11,5gb fat32 cluster default,2.5gb ext4/ext3 tested with both,290 swap all the things done with partition tool wizard)
8 flash rom
9 wipe dalvik cache ( also tested with wipe of dalvik cache and cache.
10 reboot with insert sim
11 com.android.phone unfortunatelly stopped
sorry for my english. feel free to correct me.i am willing to learn
sincereally )
re
Mr.NeoTrinity said:
Hello
Yes of course.
1 task 29
2 flash custom.ruu (the clk 1.5.0.1rc1
3 Make Partitions like below
recovery 7mb
misc 3 mb
boot 7 mb
system 370 mb
cache 7 mb
userdata 27 mb ( i cant change that value anywhere)
4 boot into cwm
5 format boot,cache,system and ext partition
6 switch off
7 put in sd 16 gb (11,5gb fat32 cluster default,2.5gb ext4/ext3 tested with both,290 swap all the things done with partition tool wizard)
8 flash rom
9 wipe dalvik cache ( also tested with wipe of dalvik cache and cache.
10 reboot with insert sim
11 com.android.phone unfortunatelly stopped
sorry for my english. feel free to correct me.i am willing to learn
sincereally )
Click to expand...
Click to collapse
1 task 29 / thats okay if you make with HD2 TOOL
2 flash custom.ruu (the clk 1.5.0.1rc1 / this is not okay.please install your bootloader with HD2 TOOL
3 Make Partitions like below
recovery 7mb / this size is not from HD2 TOOLKIT
misc 3 mb / this size is not from HD2 TOOLKIT
boot 7 mb / this size is not from HD2 TOOLKIT
system 370 mb / with HD2 TOOLKIT for EU=360MB and for TmoUS=410MB
cache 7 mb / with HD2 TOOLKIT 5MB
userdata 27 mb ( i cant change that value anywhere) / this size is not from HD2 TOOLKIT
4 boot into cwm
5 format boot,cache,system and ext partition / your phone is clean and you must not format
6 switch off
7 put in sd 16 gb (11,5gb fat32 cluster default,2.5gb ext4/ext3 tested with both,290 swap all the things done with partition tool wizard) /EXT4 with cluster default?
8 flash rom
9 wipe dalvik cache ( also tested with wipe of dalvik cache and cache.
10 reboot with insert sim
11 com.android.phone unfortunatelly stopped / this is a sign for not enough space
pixelfreak
Apps problem
Hi,
I installed, this rom Nand + data OnExt, and in some application, like Facebook (from market), if i get i want to see one group, for example, the app close down (black and out). App like, Airdroid, if i go to setting he shuts down. and others apps, like dolphin, or the default browser.. :\
What i can see, seems that when is "processing" the programs close down.
Sorry for my bad English, i wish you can understand the problem.
Edit: Clk instaltion with 2 GB EXT4 cluster default / SWAP 256 MB / the rest FAT32 cluster default , Sandisk , 8gb , class uhc
re
kakashiii said:
Hi,
I installed, this rom Nand + data OnExt, and in some application, like Facebook (from market), if i get i want to see one group, for example, the app close down (black and out). App like, Airdroid, if i go to setting he shuts down. and others apps, like dolphin, or the default browser.. :\
What i can see, seems that when is "processing" the programs close down.
Sorry for my bad English, i wish you can understand the problem.
Edit: Clk instaltion with 2 GB EXT4 cluster default / SWAP 256 MB / the rest FAT32 cluster default , Sandisk , 8gb , class uhc
Click to expand...
Click to collapse
what is the size from your recovery and cache? EXT4?
pixelfreak
Quote:
Originally Posted by kakashiii
Hi,
I installed, this rom Nand + data OnExt, and in some application, like Facebook (from market), if i get i want to see one group, for example, the app close down (black and out). App like, Airdroid, if i go to setting he shuts down. and others apps, like dolphin, or the default browser.. :\
What i can see, seems that when is "processing" the programs close down.
Sorry for my bad English, i wish you can understand the problem.
Edit: Clk instaltion with 2 GB EXT4 cluster default / SWAP 256 MB / the rest FAT32 cluster default , Sandisk , 8gb , class uhc
what is the size from your recovery and cache? EXT4?
pixelfreak
Click to expand...
Click to collapse
hi, the size that you say "install Recovery with 360 MB System and 5 MB Cache" , clk , 360 , 5mb. And the sd, formated with partition wizard. ext 4, 2gb
-pixelfreak- said:
what is the size from your recovery and cache? EXT4?
pixelfreak
Click to expand...
Click to collapse
hi, the size that you say "install Recovery with 360 MB System and 5 MB Cache" , clk , 360 , 5mb. And the sd, formated with partition wizard. ext 4, 2gb
i have problem
i have htc hd2, 2.08.HSPL, Leo_RADIO_2.15.50.14, MAGLDR v1.13 and ClockworkMod Recovery 5.0.2.6
i instal this rom androidforum.tytung.com/nexushd2-jellybean-cm10-2-t78.html on nand, everything is sucesfull. When i restat device it stuck on boot screen, that hapend with any rom which i instal on nand. i have 2gb sd card and system partition 400m, what i'm doing wrong.
i have one rom that i copy files on sd card an run ad as and works perfect, but wifi wont work. what to to to instal this rom correctly that shuold work, please help
domix5000 said:
... i have 2gb sd card and system partition 400m ...
Click to expand...
Click to collapse
That is what you're doing wrong. Do you have an ext partition on your sd card? If you don't, create one. And reduce that 400 to 300mb. (I am assuming you want to install via DataOnExt.)
Marvlesz said:
That is what you're doing wrong. Do you have an ext partition on your sd card? If you don't, create one. And reduce that 400 to 300mb. (I am assuming you want to install via DataOnExt.)
Click to expand...
Click to collapse
yes i want it istal like you say, than i must to reduce to 300m , how i create ext4 partiton and how large must it be
How big is something you decide (I suggest 1.5GB), how to create: just google "how to create ext4 partition android"