Related
Hi,
First of all I am sorry for the noob question, but how can I verify what is the partition size of Clockworkmod Recovery is creating in my cell phone?
I have a T-Mobile HD2 with MAGL 1.3, Clockworkmod Recovery 3.0.0.1 and Hyperdroid CM7 installed. Under Settings/About Phone/ Mem Info I see 134MB/411MB. Is the CWM partition related with this?
In the past I used the HD Core Droid version 1.5 witch was a very big Android ROM (270Mbytes), now a installed the Hyperdroid witch is very light (67Mbytes). But I just installed the ROM without changes in the CWM layout. Any suggestions about?
Thanks
Eduardo
magoo1275 said:
Hi,
First of all I am sorry for the noob question, but how can I verify what is the partition size of Clockworkmod Recovery is creating in my cell phone?
I have a T-Mobile HD2 with MAGL 1.3, Clockworkmod Recovery 3.0.0.1 and Hyperdroid CM7 installed. Under Settings/About Phone/ Mem Info I see 134MB/411MB. Is the CWM partition related with this?
In the past I used the HD Core Droid version 1.5 witch was a very big Android ROM (270Mbytes), now a installed the Hyperdroid witch is very light (67Mbytes). But I just installed the ROM without changes in the CWM layout. Any suggestions about?
Thanks
Eduardo
Click to expand...
Click to collapse
looks like your partition is set for around 400mb
you can modify the flash.cfg file in cwm by opening it with notepad.
and change the numbers to those recomended by the Rom dev
misc ya 1M
recovery rrecov|ro|nospr filesize MAGLDR_recovery_3.0.2.4-seadersn.img
boot yboot|ro 8M
system ya 400M
cache ya 8M
userdata ya|asize|hr allsize
Thanks for your help. Just a few question.
Where is located the flash.cfg file? So, just changing the parameter system ya from 400M to 150M is enought to release space to install more apllications?
Thanks
Eduardo
magoo1275 said:
Thanks for your help. Just a few question.
Where is located the flash.cfg file? So, just changing the parameter system ya from 400M to 150M is enought to release space to install more apllications?
Thanks
Eduardo
Click to expand...
Click to collapse
u will need to instal everything again and use the toolkit to install the 150 mb partition ... witch will leave about 200mb free ...if u install 120 mb that will leace about 300 mb free ... if u go lower mayve the rom wont boot.
for hyperdroid i used ti flash 100 mb but with 90mb the rom dont boot ...it's advisable to flash the partition set by the dev of any rom...
magoo1275 said:
Under Settings/About Phone/ Mem Info I see 134MB/411MB. Is the CWM partition related with this?
Click to expand...
Click to collapse
no, it isnt related at all, thats the memory, the RAM, not the partition size.
there is nowhere as standard that shows you teh size of the system partition (which is what you mean by CWM partition).
You can see the size of the data partition by going setings - storage - internal storage.
to see teh others, get 'super manager' from teh market, open it, and choose file explorer.
now, at teh top of the foldes list, in small writing under where it says 'back up level folder' it gives you details of teh folder you are currently in, ,
so use it to browse into your system folder, and look at the info.
EG mine says 'total 150M used 137.4M, bla blah' because I have a 150Meg system partition, and teh typhoon rom comes to about 137 meg when unzipped.
If i now browse into the cache folder, that info shows 'tot 40M, used 1.1M.....' because i chose a 40meg cache partition.
you can do the same with the sd-ext folder to see how big and how full your EXT partition on the sd card is.
Thanks a lot for all the answers. Now the this thing is getting clear for me.
Thanks guys.
hi to all...........
i need to know step by step how to anstall android rom in htc HD2
MY Hd2 Information:
Code:
HTC HD2 T8585
Syetéme version
5.2.29020(29020.5.3.12)
manila version
2.5.2012114.0
rom version
Duttys hd2 fam v25 ship fre
radio version
2.15.50.14
protocole version
15.42.50.11u
Code:
memorie flash
[COLOR="Red"][B]512 Mo[/B][/COLOR]
i find some link
http://www.xda-developers.com/android/complete-guide-to-installing-nand-android-on-hd2/
http://forum.xda-developers.com/showthread.php?t=1044830
but all speak about 576 RAM
normally the answer would be ''good god there are dozens of places telling you this information, good grief, use search!!'' but im feeling friendly, so...
phone into bootloader - use hspl4 to set 2.08.hspl - back into bootloader - flash radio 2.15.50 - reboot phone whilst holding power will start magldr - choose usb flasher - using the nand toolkit select the partition size you want (it will tell you in the rom you want to flash thread, usually post 1) and click partition - this will partition the nand and install clockwork - reboot phone holding power to start magldr - magldr option 8 ad recovery - this will start clockworkmod - advanced - partition sd card (this will wipe your sd card so back it up, , only need to do this once, it creates an EXT partition taht teh phone uses as extra internal storage, 1gb is usually right for most people) - reboot, back into magldr - back into clockwork - mounts and storage - mount sd card - copy the rom.zip you wanna flash to the sd card, still in clockwork choose install zip from sd - select teh rom you copied across - done.
magic phone said:
hi to all...........
i need to know step by step how to anstall android rom in htc HD2
MY Hd2 Information:
Code:
HTC HD2 T8585
Syetéme version
5.2.29020(29020.5.3.12)
manila version
2.5.2012114.0
rom version
Duttys hd2 fam v25 ship fre
radio version
2.15.50.14
protocole version
15.42.50.11u
Code:
memorie flash
[COLOR="Red"][B]512 Mo[/B][/COLOR]
i find some link
http://www.xda-developers.com/android/complete-guide-to-installing-nand-android-on-hd2/
http://forum.xda-developers.com/showthread.php?t=1044830
but all speak about 576 RAM
Click to expand...
Click to collapse
Well you clearly haven't read enough! All of these threads show that flashing a .50 radio unlocks the 576 MB RAM. For f**k's sake, stop posting stupid questions in the Q&A when there have been a tonne of them, just use the search and read properly. It isn't hard.
EDIT: Lol, just saw that samsamuel got in a minute before me. Oh how ironic my post now is :')
samsamuel said:
normally the answer would be ''good god there are dozens of places telling you this information, good grief, use search!!'' but im feeling friendly, so...
phone into bootloader - use hspl4 to set 2.08.hspl - back into bootloader - flash radio 2.15.50 - reboot phone whilst holding power will start magldr - choose usb flasher - using the nand toolkit select the partition size you want (it will tell you in the rom you want to flash thread, usually post 1) and click partition - this will partition the nand and install clockwork - reboot phone holding power to start magldr - magldr option 8 ad recovery - this will start clockworkmod - advanced - partition sd card (this will wipe your sd card so back it up, , only need to do this once, it creates an EXT partition taht teh phone uses as extra internal storage, 1gb is usually right for most people) - reboot, back into magldr - back into clockwork - mounts and storage - mount sd card - copy the rom.zip you wanna flash to the sd card, still in clockwork choose install zip from sd - select teh rom you copied across - done.
Click to expand...
Click to collapse
The great thing about the internet is that if you know how to use it .... you can get lots of other opinions viewpoints and lots of stufffffffffffffff that you didn't know before....
and then who knows...............
edit.......I don't feel like a senior member.....
samsamuel said:
normally the answer would be ''good god there are dozens of places telling you this information, good grief, use search!!'' but im feeling friendly, so...
phone into bootloader - use hspl4 to set 2.08.hspl - back into bootloader - flash radio 2.15.50 - reboot phone whilst holding power will start magldr - choose usb flasher - using the nand toolkit select the partition size you want (it will tell you in the rom you want to flash thread, usually post 1) and click partition - this will partition the nand and install clockwork - reboot phone holding power to start magldr - magldr option 8 ad recovery - this will start clockworkmod - advanced - partition sd card (this will wipe your sd card so back it up, , only need to do this once, it creates an EXT partition taht teh phone uses as extra internal storage, 1gb is usually right for most people) - reboot, back into magldr - back into clockwork - mounts and storage - mount sd card - copy the rom.zip you wanna flash to the sd card, still in clockwork choose install zip from sd - select teh rom you copied across - done.
Click to expand...
Click to collapse
@samsamuel
1- thanks for your replay
2-i know about search ,and MR google say there is 2 methode one with SD cartd and the second without SD card
3-im traying the solution without sd card ......the hardspl is OK.....i have the radio2.15.50 but....affter the MAGLDR113 my htc stay at HTC BOOT LOGO ,,?
magic phone said:
affter the MAGLDR113 my htc stay at HTC BOOT LOGO ,,?
Click to expand...
Click to collapse
assuming you mean you flashed magldr, but it doesnt start magldr? just goes to splash screen?
If yes, then either hspl is wrong or radio is wrong.
hspl MUST be 2.08.hspl - enter bootloader and check the spl line.
yo, i wrote this once to another guy per pn. think its still up to date. could be possible that i messed up some facts hehe
redplate said:
MTN_HD2 said:
i wanna the ics too :| but the f'ing wifi doesnt work ... how did you install it ? (every step)
thanks in advance
me : task29>magldr>190/2 190/5 200/10 cwm(tried all) >the rom
Click to expand...
Click to collapse
Hi. thats not that difficult.
Best thing is you read HERE CAREFULLY
But i am trying to explain it easy for you:
First you need to be sure you have the following "things" installed correctly:
1.) Prepare your Mobile
HSPL 2.08 (to be able to flash MAGLRD)
http://forum.xda-developers.com/showpost.php?p=5279234&postcount=1
Radio 2.50.15.14 (which supports 576MB RAM)
http://forum.xda-developers.com/showthread.php?t=611787
MAGLDR 1.13 Bootloader (to be able to install Clockwork Mod)
http://forum.xda-developers.com/showthread.php?t=893618
Recovery (Clockwork Mod; i prefer the Touch version)
http://forum.xda-developers.com/showthread.php?t=1419733
For ICS you need at least 200MB system partition (Recovery Layout; the space from your NAND (intern memory) for your ROM file). Means you have to edit the flash.cfg coming with MAGLDR before flashing the CWM; do this with Notepad++:
I am using following config (flash.cfg):
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 5M
system ya 220M
cache ya 5M
userdata ya|asize|hr allsize
Now you are prepared for installing a ROM. In your case ICS.
2.) Flash ROM
Download the .zip file for your ROM. There are two versions. CLK (just another Bootloader) and MAGLDR. We are using MAGLDR. So download it here:
[15.Jan.2012] NexusHD2-ICS-4.0.3-CM9 V1.1
http://forum.xda-developers.com/showthread.php?t=1434860
Now you just need to copy the ROM .zip on your SD-Card. Then load into Bootloader (MAGLDR) and choose point 8. for your Recovery (CWM).
Now, if you had another rom installed, you need to wipe all cache and data including the Dalvik Cache (under Advanced).
Then install your .zip file with "install zip from sd" and wait. Done. Restart your mobile
3.) Install DATA2SD
IF you want to use DATA2SD (means to store apps and system relevant data on your sd-card) you have to create an EXT-Partition on your SD-CARD.
Just do this with CWM, there is an option for it (should be something like "Partition your SD-Card"). I am using 1GB partition with 0MB swap.
Once you have done this navigate to this thread and do EXACTLY what that guy wrote in post #207. But instead of using the file from post #207 use the flashable file from post #174 (40ad2sdx-a2Recovery.zip).
If you did it correctly you are done
And again, for additional info read THIS COMPLETLY.
Have fun
Click to expand...
Click to collapse
samsamuel said:
assuming you mean you flashed magldr, but it doesnt start magldr? just goes to splash screen?
If yes, then either hspl is wrong or radio is wrong.
hspl MUST be 2.08.hspl - enter bootloader and check the spl line.
Click to expand...
Click to collapse
@samsamuel
thanks again my friend ok i do all the step
i have the 2.08hspl....and i have also the task29 affter that the MAGLDR113 work fine......
now i chose the USB flasher mode i know that .the probleme is if i can flash the rom without sd card or not ?
you flash the partition layout (and cwm) through usb flasher, then flash teh rom from sd.
samsamuel said:
you flash the partition layout (and cwm) through usb flasher, then flash teh rom from sd.
Click to expand...
Click to collapse
Ok Now i have this erreur when formating my sd card
Code:
formating /data.......
formating /cache.......
formating /sd-ext......
[COLOR="Red"][B]no app2sd partition found .skipping format of /sd-ect.[/B][/COLOR]
formatting /sdcard/andoid_secure.............
[COLOR="Red"][B]Error mounting /sdcard/android_secure![/B][/COLOR]
Cos you haven't created an ext partition yet?
samsamuel said:
Cos you haven't created an ext partition yet?
Click to expand...
Click to collapse
OOops and how to create an ext partition !!!!! sorry samsamuel this phone make me crazyy
magic phone said:
OOops and how to create an ext partition !!!!! sorry samsamuel this phone make me crazyy
Click to expand...
Click to collapse
Bloody hell, can't you do anything yourself? Are you completely incapable of typing a question into Google!?
Boot into CWM recovery and select partition SD card, choose 1024Mb partition and 0Mb swap. This will delete everything on your SD card though.
Nigeldg said:
Bloody hell, can't you do anything yourself? Are you completely incapable of typing a question into Google!?
Boot into CWM recovery and select partition SD card, choose 1024Mb partition and 0Mb swap. This will delete everything on your SD card though.
Click to expand...
Click to collapse
If you have nothing nice to say, don't say anything at all, i think is better to ask google to ask some new mombre hiere. because your solution dont work and if a choose 1024mb partition i cant format my sd card and i cant copie the rom inside
but with 512M partition all work but phone reboot affter update .thanks to all
and big thanks to samsameul
I want to try a ROM which says:
Partition Layout (5/155/5) use hd2 toolkit
SDext: min. 500mb
I am not 100% sure what does it mean SDext is probably 500 ext patition bigger than 500
5/155/5 is
5 cashe
155 data and
5 WHAT????
Cant figure this out.
Thank you
Do you have any android rom installed? If yes, then you should (I had on every rom) have an option on reboot menu: reboot, recovery and BOOTLOADER - choose this one. And there you have SETTINGS->REPARTITION NAND and there set these ones your roms prefers. If you have not, then try to install this rom choosen by you, and maybe there will be option BOOTLOADER on menu. These are partitions, for example 155data(system) is space for system (I think). But standard settings are good for me and works with every rom.
[EDIT]
Try to boot phone by holding [back] nad [Power]. This opens bootloader and there you can set all.
Partition your nand using HD2 Nand Tookit.
First 5 is boot partition set to 5 by default
155 is system partition,
next 5 is cache size.
sdext partition can be set up from recovery (in cwm recovery go to advanced menu and select partition sd card), follow instructions for your rom. This can be used as if it was internal memory by your rom..
ALSO you might want to take a look HERE..
Edit: best to post any questions about any specific ROM in the ROM thread
This question was not "how-to", but more "what does 5/155/5 mean" type of question. Last time I played with internal memory of the device all I had to do was select the appropriate CWM version. This is why I asked here, I think it belongs, cos is general knowledge kind of thing.
I kind of dont see how to fiddle the size of /boot, no problems with /data and /cashe, but since you say this is default I wont have to, I suppose.
A few days ago I was pissed of by CyanogenMod (and stock Andriod in general), cos the only option to deal with Vcards is Handsend sms, but Handsend will not search for contacts correctly in Bulgarian (CYR) when installed on vanilla Android - small letters will not match capital and vice versa in contact names. This is why I decided to go for Sense - the message app is simply better...
Rather than using toolkit, download the CWM package and inside is a file called flash.cfg. Open this file and you should get this (maybe a different system or cache size)
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 5M
system ya 150M
cache ya 5M
userdata ya|asize|hr allsize
Click to expand...
Click to collapse
5/155/5 is basically the middle three lines, i.e. 5Mb boot partition, 150Mb system partition and 5Mb cache partition. I don't know why chefs post it like this as I'm reasonably sure the boot is always 5Mb (I've never seen differently) so they could just post the system partition size (as quite a lot do). Hope this helps
shanman-2 said:
Partition your nand using HD2 Nand Tookit.
First 5 is boot partition set to 5 by default
155 is system partition,
next 5 is cache size.
sdext partition can be set up from recovery (in cwm recovery go to advanced menu and select partition sd card), follow instructions for your rom. This can be used as if it was internal memory by your rom..
ALSO you might want to take a look HERE..
Edit: best to post any questions about any specific ROM in the ROM thread
Click to expand...
Click to collapse
?????????!!!!!! ???
shanman-2 said:
?????????!!!!!! ???
Click to expand...
Click to collapse
mmmm which part for the "?????????!!!!!! ???" ?
! that bit
You can use CWM Recovery it's very easy to use for repartition your nand, but you must install MAGLDR or CLK first if you want go to recovery..
ariebower said:
You can use CWM Recovery it's very easy to use for repartition your nand, but you must install MAGLDR or CLK first if you want go to recovery..
Click to expand...
Click to collapse
Hm, this is something I missed!
1. I use mainly Ubuntu, hence I have have to rely on Wine or a pc I almost dont use for windows
2. I have CWM and MAGLDR installed
How to re-partition based on config file only? Can I do it?
Put the config where? (sdcard, ROM.zip)
Run what in CWM.
You would make my day, since I am away form how, with my laptop only, the ROM I run has a bug with wifi tether and I have to change it, but options are quite limited, since I dont know how to re-part, I have to choose ROMs that rely on system less or equal to 155 at teh moment. And I need a Sense, since others cant receive 100% vcards in Bulgarian (CYR)
deckoff said:
Hm, this is something I missed!
1. I use mainly Ubuntu, hence I have have to rely on Wine or a pc I almost dont use for windows
2. I have CWM and MAGLDR installed
How to re-partition based on config file only? Can I do it?
Put the config where? (sdcard, ROM.zip)
Run what in CWM.
You would make my day, since I am away form how, with my laptop only, the ROM I run has a bug with wifi tether and I have to change it, but options are quite limited, since I dont know how to re-part, I have to choose ROMs that rely on system less or equal to 155 at teh moment. And I need a Sense, since others cant receive 100% vcards in Bulgarian (CYR)
Click to expand...
Click to collapse
Maybe this thread will help you to do it without a PC
Hi, I've been flashing my HD2 for 1 hour and it stopped at 'Formatting System...' I don't know what's wrong. I did Task29, all kind of wipes and it stopped here.
Changelog:
-- Instal /sdcard/HD2_Android_2.3.5_Sense_3.5.zip
Finding update package...
Opening update package...
Installing update...
Formatting Boot...
Formatting System...
I'm trying this ROM by cLK & TWRP v2.2.2.0
Hey I just met you,
And this is crazy.
Could be the recovery.
So update it maybe?
Try a different recovery. Sometimes, I can't install certain ROMs until I change the recovery.
nozyk42 said:
Hi, I've been flashing my HD2 for 1 hour and it stopped at 'Formatting System...' I don't know what's wrong. I did Task29, all kind of wipes and it stopped here.
Changelog:
-- Instal /sdcard/HD2_Android_2.3.5_Sense_3.5.zip
Finding update package...
Opening update package...
Installing update...
Formatting Boot...
Formatting System...
I'm trying this ROM by cLK & TWRP v2.2.2.0
Click to expand...
Click to collapse
I would ask you to use CLK and make sure you have made a system partition on your SD card.
Rahil S said:
I would ask you to use CLK and make sure you have made a system partition on your SD card.
Click to expand...
Click to collapse
I assume you haven't read his post.
He clearly said
nozyk42 said:
...
I'm trying this ROM by cLK & TWRP v2.2.2.0
Click to expand...
Click to collapse
Besides, even if he were using MAGLDR AND didn't have an ext partition, that shouldn't prevent "system" from being wiped.
I made SD-EXT (ext4) partition 1024 mb, 0 mb swap (2 minutes before flashing ROM)
Then I tried flash my new ROM but it stopped on 'Formatting System...'
I used universal method to flash by cLK which I known but when I tried with cLK from link in thread with ROM, then worked.
But I think that SD partition didn't create because in the settings applications manager free space show only ~110mb
(in my previous ROM when I made the SD-EXT partition by method which I know the applications manager show ~1000 mb free).
cLK Install Manual:
Download archive with the cLK loader and Recovery from here than unpack its content.
Connect PDA in bootloader mode ("mattress") and run LeoAdvancedRUU.exe from сLK folder
Wait for PDA reboot and clamp a key "Back". Connect PDA with cable to PC
Install the driver if the PC doesn't see a PDA connected (download from here)
Run fastboot_resize.bat from cLK_CWM_Recovery folder
Wait for PDA reboot and get to the menu cLK. Run fastboot_install_recovery.bat from a folder cLK_CWM_Recovery. Wait the record ends.
Choose Recovery mode by arrows and press the call button "Green button"
Choose point "Install zip from sdcard" by arrows and next "Choose zip from sdcard", choose our archive with firmware (the firmware should be thrown preliminary on a sdcard) and press a call button "Green button"
After the installation finishes get to the menu again. Press a key "Back" and choose point "Reboot system now"
The PDA will reboot and the Android will be started. The first start a bit longer then usual
Click to expand...
Click to collapse
refresh
nozyk42 said:
refresh
Click to expand...
Click to collapse
Why are you refreshing? Didn't you say that your problem had been fixed?
nozyk42 said:
I made SD-EXT (ext4) partition 1024 mb, 0 mb swap (2 minutes before flashing ROM)
Then I tried flash my new ROM but it stopped on 'Formatting System...'
I used universal method to flash by cLK which I known but when I tried with cLK from link in thread with ROM, then worked.
But I think that SD partition didn't create because in the settings applications manager free space show only ~110mb
(in my previous ROM when I made the SD-EXT partition by method which I know the applications manager show ~1000 mb free).
Click to expand...
Click to collapse
Your problem was not being able to pass system formatting, now you are, or I am wrong?
Yes, but the most important was make a working EXT partition on my SD card, where the phone could automatically install new apps ;/
But I think that SD partition didn't create because in the settings applications manager free space show only ~110mb
Click to expand...
Click to collapse
nozyk42 said:
Yes, but the most important was make a working EXT partition on my SD card, where the phone could automatically install new apps ;/
Click to expand...
Click to collapse
Check the sdcard in a computer, see if the partition is there with correct settings.
In the computer I can see free space 6,3 gb (mircoSD 8 gb) so partition is probably well set ;/
nozyk42 said:
In the computer I can see free space 6,3 gb (mircoSD 8 gb) so partition is probably well set ;/
Click to expand...
Click to collapse
No, don't make assumptions. Use windows' desk management or any 3rd party app to CHECK.
Probably the rom is using ad2sd so it's mounting data from nand and putting apps on sd-ext partition (happens to me with energy sense 3.5 rom).
Use EXTRecovery to wipe all partitions, then create one, then print a partition table to check.
I will check this when I come back from work. Use phone like HTC HD2 or anyone smartphone is useless without sd partition.
In the cLK table looks like that:
In the 4EXT Recovery Control looks like that:
nozyk42 said:
In the cLK table looks like that:
..
In the 4EXT Recovery Control looks like that:
..
Click to expand...
Click to collapse
Have you tried a different recovery as I suggested?
Marvlesz said:
No, don't make assumptions. Use windows' desk management or any 3rd party app to CHECK.
Click to expand...
Click to collapse
I don't understand exactly what you mean
nozyk42 said:
I don't understand exactly what you mean
Click to expand...
Click to collapse
Forget about that. I was referring to the recovery. Try CWM for example and see if it works.
hmm, but why 4EXT Recovery Control shows sd-ext capacity 915 MB? I think that partition is well done, but my rom can't use it.
nozyk42 said:
hmm, but why 4EXT Recovery Control shows sd-ext capacity 915 MB? I think that partition is well done, but my rom can't use it.
Click to expand...
Click to collapse
tried another rom?
i flashed NexusHD2-JellyBean-CM10.1_V2.4 rom on HD2 using native SD method,everything worked and when it rebooted the logo kept on the start screen for some time atleast 30minute before i pulled out the battery,is that rom not working?then flashed same rom but V2.2 and this time it booted up in 10minute but its some what slow,which i read in the comments as well,which version of jellybean will be good to go then?
also i used a 2gb sd card,i kept half of it for sd storage n other half for apps as ext4 internal storage but when i checked storage it showed only 114mb free out of some 845mb,where is rest of the memory gone?there are not much default apps to take up all the space?
also whenever i try to install facebook app,it says not enough memory/storage but when i install other apps they work fine,i even tried downloading .apk offline,moved to sd and installed but same error,the other half as sd storage still has good 745mb free
if i need to install games or more apps,they will install on internal memory or on sd card,does this means i can not install big games?
also whenever i try to play HD movies,they stuck alot,maybe they'll work fine on some custom rom having 720p playback option?
i don't know much about flashing,so far i have only used nand flash using cwm and native sd for this
Thankyou for your time..
try full formatting the sd card and repartition it ... ( primary fat32 and primary ext4)
try flashing rom using nand method and immediately flash this patch after it ...
this method is very good and very fast ...
and the best rom of between newest roms is NexusHD2 CM10.1.2 v2.6
i think problem with NativeSD because of your memory ext partition
mosi hd2 said:
try full formatting the sd card and repartition it ... ( primary fat32 and primary ext4)
try flashing rom using nand method and immediately flash this patch after it ...
this method is very good and very fast ...
and the best rom of between newest roms is NexusHD2 CM10.1.2 v2.6
i think problem with NativeSD because of your memory ext partition
Click to expand...
Click to collapse
i did formatted it first then i used MiniTool Partition Wizard to make 2 primary partitions,one as fat n other as ext4 and then i flashed it using native sd from MAGLDR
for NAND flash i had been using CWM which has options of 150 250 n 400mb partitions,now if i want to use 2gb card,half for both like before,i'll use same application to make partition but then can you tell me how to flash this rom using nand?
i mean i know one way is CWM and other is that i can use usb flasher which i never used but for that i need to execute DAF but whenever i unzip a rom,i dont see any DAF file,n also how to flash this file which you suggested.
with the current rom,i have only 64mb left for internal memory out of 900mb ext4 partiton that i made :S
and whenever it tried to update any app,it says not enough space
now i remember,this was also one way to select internal storage size
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
but what is CWM partition for?if i select 1gb from 2gb for apps,then 1gb is left for music etc but CWM space is for rom then? or should i just skip it then
i am confused now,if this is not for internal storage then what is this space for? also how much cwm size should be selected n how much space does rom takes?
so i'll go with this latest rom
thank you for your help again.
chaudhary9 said:
i did formatted it first then i used MiniTool Partition Wizard to make 2 primary partitions,one as fat n other as ext4 and then i flashed it using native sd from MAGLDR
for NAND flash i had been using CWM which has options of 150 250 n 400mb partitions,now if i want to use 2gb card,half for both like before,i'll use same application to make partition but then can you tell me how to flash this rom using nand?
i mean i know one way is CWM and other is that i can use usb flasher which i never used but for that i need to execute DAF but whenever i unzip a rom,i dont see any DAF file,n also how to flash this file which you suggested.
with the current rom,i have only 64mb left for internal memory out of 900mb ext4 partiton that i made :S
and whenever it tried to update any app,it says not enough space
now i remember,this was also one way to select internal storage size
but what is CWM partition for?if i select 1gb from 2gb for apps,then 1gb is left for music etc but CWM space is for rom then? or should i just skip it then
i am confused now,if this is not for internal storage then what is this space for? also how much cwm size should be selected n how much space does rom takes?
so i'll go with this latest rom
thank you for your help again.
Click to expand...
Click to collapse
first, go to Setting > App and look at the total internal storage size ... if it is lower than your ext4 partition, then you installed rom with nand method ( no nand with DataOnExt or nand with extra patches. then ext partition is Inefficient )
for your problem, i suggest you that install rom with clk method ...
Here is the step-by-step guide to do it
1- create 1024MB Ext4 (primary) with minitool partition ( guide . sorry for its language it's persian but it's not unclear )
2- power off hd2
3- hold Volume- and power button ( It will load into ‘Red, Green, Blue and White’ screen bootloader )
4- hspl 2.08 (in RGBW screen ) - download
5- task29 (in RGBW screen ) - download
6- radio 2.12 or 2.15 (in RGBW screen ) - download
7- back clk (in RGBW screen ) - download
8- now, your phone will boot up into android bootloader (a black page) . go to "setting" > "resize partition" and set a partition table that match with your rom.
9- press back button and go to recovery .
10- full wipe ( press wipe "data/factory reset", "wipe cache partition" , battery and dalvike (in advenced) )
11- now install zip form sd-card ( i recommend install NexusHD2 CM10.1.2 v2.6 with DataOnExt method ) ...
12- reboot
13- enjoy
mosi hd2 said:
first, go to Setting > App and look at the total internal storage size ... if it is lower than your ext4 partition, then you installed rom with nand method ( no nand with DataOnExt or nand with extra patches. then ext partition is Inefficient )
for your problem, i suggest you that install rom with clk method ...
Here is the step-by-step guide to do it
1- create 1024MB Ext4 (primary) with minitool partition ( guide . sorry for its language it's persian but it's not unclear )
2- power off hd2
3- hold Volume- and power button ( It will load into ‘Red, Green, Blue and White’ screen bootloader )
4- hspl 2.08 (in RGBW screen ) - download
5- task29 (in RGBW screen ) - download
6- radio 2.12 or 2.15 (in RGBW screen ) - download
7- back clk (in RGBW screen ) - download
8- now, your phone will boot up into android bootloader (a black page) . go to "setting" > "resize partition" and set a partition table that match with your rom.
9- press back button and go to recovery .
10- full wipe ( press wipe "data/factory reset", "wipe cache partition" , battery and dalvike (in advenced) )
11- now install zip form sd-card ( i recommend install NexusHD2 CM10.1.2 v2.6 with DataOnExt method ) ...
12- reboot
13- enjoy
Click to expand...
Click to collapse
i added up internal storage n sd storage,all adds up to 1.8gb,but internal storage shows 754mb used :S
went to storage,it shows total internal storage as 845mb,available 62mb n apps using 188mb n where is rest of it
anyways i'll try the procedure suggested by you
if i create 1024mb ext4 partition then should i leave the rest as fat by splitting the storage as ext4 n fat32 or just format whole sd card and just partition 1024 as ext4
saw the pdf,i think first i just resize to free up 1024mb then create partition of it then format it n then apply
i tested it without applying,there is no format option for newly created partition so it means i'll format the other space which is old one?
rest will stay as it is
i has hspl n radio,no task 29 done by me ever,but i think i need to start from first step1 again
how much space to partition for the rom v2.6 one?like if zip is 204mb so that much space or space that it will take after unzip
n u mentioned something in 11th step,i dont know what does this means:
" with DataOnExt method"
btw can we flash any rom using nand,i thought only nand roms can be flashed by nand n specific ones for native sd,like there is one miui rom,when i flash it using nand cwm or native sd,it asks if you want to flash using nand or sd with ext,either way after flashing it,it says change boot to native sd at end but htc logo disappears,screen becomes blank at reboot and nothing shows up,rom name is "miuiandroid_hd2_jb-3.6.28"
thanks for your help :good:
chaudhary9 said:
i added up internal storage n sd storage,all adds up to 1.8gb,but internal storage shows 754mb used :S
anyways i'll try the procedure suggested by you
if i create 1024mb ext4 partition then should i leave the rest as fat by splitting the storage as ext4 n fat32 or just format whole sd card and just partition 1024 as ext4
saw the pdf,i think first i just resize to free up 1024mb then create partition of it then format it n then apply
rest will stay as it is
i has hspl n radio,no task 29 done by me ever,but i think i need to start from first step1 again
how much space to partition for the rom v2.6 one?like if zip is 204mb so that much space or space that it will take after unzip
thanks for your help :good:
Click to expand...
Click to collapse
destroy all partitions on your sd.
now create 1GB primary fat32 and 1GB primary Ext4 like guide.now you have a ext partition for apps and fat32 partition for data and it's good
Code:
285mb for minimum
320mb for full
mosi hd2 said:
destroy all partitions on your sd.
now create 1GB primary fat32 and 1GB primary Ext4 like guide.now you have a ext partition for apps and fat32 partition for data and it's good
Code:
285mb for minimum
320mb for full
Click to expand...
Click to collapse
thanks
i'll try this today
btw besides space issue,this rom is quite slow n one new issue that whenever some one calls,there is no volume for ringtone though vibration works fine,i hope this issue gets resolved in next rom too
u mentioned something in 11th step,i dont know what does this means:
" with DataOnExt method"
can you explain this?
also can we flash any rom using nand,i thought only nand roms can be flashed by nand n specific ones for native sd,like there is one miui rom,when i flash it using nand cwm or native sd,it asks if you want to flash using nand or sd with ext,either way after flashing it,it says change boot to native sd at end but htc logo disappears,screen becomes blank at reboot and nothing shows up,rom name is "miuiandroid_hd2_jb-3.6.28"
thank you for your help and time :good:
chaudhary9 said:
thanks
i'll try this today
btw besides space issue,this rom is quite slow n one new issue that whenever some one calls,there is no volume for ringtone though vibration works fine,i hope this issue gets resolved in next rom too
u mentioned something in 11th step,i dont know what does this means:
" with DataOnExt method"
can you explain this?
also can we flash any rom using nand,i thought only nand roms can be flashed by nand n specific ones for native sd,like there is one miui rom,when i flash it using nand cwm or native sd,it asks if you want to flash using nand or sd with ext,either way after flashing it,it says change boot to native sd at end but htc logo disappears,screen becomes blank at reboot and nothing shows up,rom name is "miuiandroid_hd2_jb-3.6.28"
thank you for your help and time :good:
Click to expand...
Click to collapse
slow?
nexus v2.6 is very fast and smooth ... :laugh:
and low sound on ringtones is bug of most 4.1+ roms that it fixed somewhat by tytung ( low sound fixer )
nand with dataonext is a installation method which allow you to use ext partition as internal storage ... and install more apps ...
During installation of the ROM in one step, you have to choose between "Nand", "Nand with DataOnExt","NativeSD" and i would recommend nand with dataonext
mosi hd2 said:
slow?
nexus v2.6 is very fast and smooth ... :laugh:
and low sound on ringtones is bug of most 4.1+ roms that it fixed somewhat by tytung ( low sound fixer )
nand with dataonext is a installation method which allow you to use ext partition as internal storage ... and install more apps ...
During installation of the ROM in one step, you have to choose between "Nand", "Nand with DataOnExt","NativeSD" and i would recommend nand with dataonext
Click to expand...
Click to collapse
thanks for in time reply
i was reading this thread and thought that i'd have to do all steps in post 2 for dataonext,thats a relief
http://forum.xda-developers.com/showthread.php?t=1843062
btw do i have edit flash.cfg file to make partition of 285mb size as normally it would either be 250 or 400mb
i saw this on forum but it was for 200mb:
Code:
misc ya 1M
recovery rrecov|ro|nospr 5M cwm_recovery_leo.img
boot yboot|ro 5M
system ya 200M
cache ya 2M
userdata ya|asize|hr allsize
what changes should i do to make it 285mb as i saw on his forum that full version requires 285 n min 200mb
just change system from 200 to 285 with no change in others?
for 400mb it was like this
Code:
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 5M
system ya 400M
cache ya 4M
userdata ya|asize|hr allsize
but since i'll use clk to partition so i think i wont have this option right?
dont want to make 400mb space when it requires alot less as that will eat up space for apps i think.
i thought even normal flash like native sd also used internal storage for apps etc,i think current rom v2.2 is slow for me because of sd card having class 4.
chaudhary9 said:
thanks for in time reply
i was reading this thread and thought that i'd have to do all steps in post 2 for dataonext,thats a relief
http://forum.xda-developers.com/showthread.php?t=1843062
btw do i have edit flash.cfg file to make partition of 285mb size as normally it would either be 250 or 400mb
i saw this on forum but it was for 200mb:
Code:
misc ya 1M
recovery rrecov|ro|nospr 5M cwm_recovery_leo.img
boot yboot|ro 5M
system ya 200M
cache ya 2M
userdata ya|asize|hr allsize
what changes should i do to make it 285mb as i saw on his forum that full version requires 285 n min 200mb
just change system from 200 to 285 with no change in others?
for 400mb it was like this
Code:
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 5M
system ya 400M
cache ya 4M
userdata ya|asize|hr allsize
but since i'll use clk to partition so i think i wont have this option right?
dont want to make 400mb space when it requires alot less as that will eat up space for apps i think.
i thought even normal flash like native sd also used internal storage for apps etc,i think current rom v2.2 is slow for me because of sd card having class 4.
Click to expand...
Click to collapse
thanks dear
according to saying the cooker of this rom, 200MB for minimum but experience has shown that more size for system partition (also for other especially system and cache) is better.
for change partition, go to bootloader (back button with power) , go to "setting" > "resize partitions" and set partition table ( misc=1M ,recovery=5M ,boot=5M, system=(285M min and 315 full) ,cache=(2M or 3) )
if you have sd card with high class, it's better to install rom with NativeSD ...
and really 2.2 and 2.6 are far apart ... 2.6 is so faster
mosi hd2 said:
thanks dear
according to saying the cooker of this rom, 200MB for minimum but experience has shown that more size for system partition (also for other especially system and cache) is better.
for change partition, go to bootloader (back button with power) , go to "setting" > "resize partitions" and set partition table ( misc=1M ,recovery=5M ,boot=5M, system=(285M min and 315 full) ,cache=(2M or 3) )
if you have sd card with high class, it's better to install rom with NativeSD ...
and really 2.2 and 2.6 are far apart ... 2.6 is so faster
Click to expand...
Click to collapse
thanks
back button with power while phone is on or when its off?
also i have to do this before flashing or during which step?
i still couldnt get it about native SD,if class is higher then after flashing rom will be faster?
i'll take out the sd card format,partition,transfer the new rom n then put it back in,though clk may have usb storage option like magldr had,but still i cant format sd card while rom is running on it i guess
native SD or nand,how they effect anything,for sd i get it thats its something to do with memory card,nand maybe with internal storage
thank you for all your help
you have been very patient with all my so many questions/
mosi hd2 said:
8- now, your phone will boot up into android bootloader (a black page) . go to "setting" > "resize partition" and set a partition table that match with your rom.
Click to expand...
Click to collapse
or i think i just have to select 315mb in this step instead of going into bootloader with back button and power ?
EDIT
tried back button with power before doing anything,it loaded into magldr
thanks guy
chaudhary9 said:
thanks
back button with power while phone is on or when its off?
Click to expand...
Click to collapse
when its off
chaudhary9 said:
also i have to do this before flashing or during which step?
i still couldnt get it about native SD,if class is higher then after flashing rom will be faster?
Click to expand...
Click to collapse
set partition table before flashing ...
if class is higher, rom is very very faster ...
chaudhary9 said:
or i think i just have to select 315mb in this step instead of going into bootloader with back button and power ?
EDIT
tried back button with power before doing anything,it loaded into magldr
Click to expand...
Click to collapse
if you installed clk after hspl! ask29! & radio! , you shouldn't see magldr ...
please follow guide step by step
mosi hd2 said:
thanks guy
when its off
set partition table before flashing ...
if class is higher, rom is very very faster ...
if you installed clk after hspl! ask29! & radio! , you shouldn't see magldr ...
please follow guide step by step
Click to expand...
Click to collapse
i followed all the steps,it was very easy but after rebooting at the end,it boots in recovery?
with magldr there used to be an option of boot nand but there no such thing for clk so whats wrong here?
also you said rom is very fast with higher class,is that for native sd only or that works for nand with dataonext as well?
when i was flashing it,it showed me internal storage sd space etc all correct where as when i was flashing with native sd it showed me few of them as -1 so i guess everything worked well except for not booting v2.6 rom
mosi hd2 said:
thanks guy
when its off
please follow guide step by step
Click to expand...
Click to collapse
i have flashed it thrice already following all steps,i noticed that its T mobile so i flashed with just nand only as well but every time it boots into recovery
how much memory card size can hd2 easily handle and can it play hd videos n big hd games without getting stuck,otherwise getting more size card wont be of much use which i was considering n as well as class 10
EDIT
so i got tired and i repeated all steps but with magldr this time,modified space for CWR
n this time it worked
though what i observed when i was flashing with clk i was getting this,even though i set partition of system to 315 3 times
system nand 150mb
free 149
data nand 767mb
free 765
and then with magldr
i got this
sys nand 315mb
free 315
data nand 605mb
free 604
maybe this was the fault,clk wasnt changing system partition and so it wasnt booting
this rom is working great
but market says no connection even though its connected to wifi started working after reboot,relief
internal storage shows 0.93gb total with 753 available 125 for apps,seems some is lost somewhere but atleast its showing most of it,yay
when i making partitions and formatted,applied,it showed some 67mb used from 1024
Did you success to install the rom?
mosi hd2 said:
Did you success to install the rom?
Click to expand...
Click to collapse
yea its working fine
i edited my last post,maybe you didn't saw that
but its working magldr n cwr,didnt worked with clk maybe because it couldnt partition system
chaudhary9 said:
yea its working fine
i edited my last post,maybe you didn't saw that
but its working magldr n cwr,didnt worked with clk maybe because it couldnt partition system
Click to expand...
Click to collapse
good
but clk works fine.
mosi hd2 said:
good
but clk works fine.
Click to expand...
Click to collapse
i dont know i tried 3 times,every time i set partition of system to 315 but while flashing it showed system nand as 150mb but when using cwr it showed it as full 315mb
chaudhary9 said:
i dont know i tried 3 times,every time i set partition of system to 315 but while flashing it showed system nand as 150mb but when using cwr it showed it as full 315mb
Click to expand...
Click to collapse
note: after setting partition table, you must commit change ... then clk will reboot after it
:good: