Related
Im kinda new to this but i have been reading & trying for a few days before asking for help but i feel i am stuck now.
I have gone through the process & installed a small rom with clockworkmod using a 150mb partition & it went ok.
Now i want to install a larger rom eg. pyramid_HTC_WWE_1.35.401.1_v1.5_EU.zip (338mb) using clockworkmod & this is where i have the problem, i have followed the steps but when installing the rom it freezes just under halfway install.
Using bootloader I have now used Task29 for a clean install, then installed MAGLDR113, using MAGLDR i used option 5 (USB flasher) & installed the unzipped () to make a partition for the larger rom.
After reboot i went to magldr option 8.AD Recovery & loaded clockworkmod, advanced then partition SD card, chose EXT size=1024, swap size=0M then rebooty.
Now am i supposed to see 4 partitionson my SD card because i cant?
one page i read that i should now transfer my ROM.zip to my Sd card, & i also read on another page that i should go to "mounts & storage" & chose "format sd-ext" I have tried both ways!
With the rom.zip on my card, i chose the "install zip from sdcard" option etc, it installs to just under half way then just stays there for ages, how long should this take for a 338mb zip file?
So i giveup, battery out & try it with a smaller zip (hyperdroid-cm7) 69mb zip & it installs ok, so where am i goin wrong??
Q1, after partitioning the SD card am i supposed to see 4 partitions on the card? because i dont, maybe i should partition it on my pc, do i just divide it into 4 partitions & name then ext, ext1, ext2, ext3? or is there a guide for doin it on ur pc?
Q2.can anyone see where else i might be going wrong?
I feel i am just doin the same thing over & over so thanks for any help you can give.
Something strange i have noticed that if i use the HD2 toolkit to try & create a 400mb partition i get an error sayin something about not enough space, i have to use a seperate Recovery_400M.zip that i downloaded from the NFEUMAN pages?
first of all your sd card patition is right. you must have 2 partitions, fat 32 and sd-ext. now in hd2 nand tool kit choose mgldr partition size as 'custom' then cache size 5MB then click repartition in usb flasher mode then write 190 in the opening window not 400. that's all.
I have managed to get the rom to bootup now after waiting for ages, but when booted it says the memory is low so im guessing its not using the SD card, when i look at the SD card i do not see any partitions so the partitioning tool in clockworkmod hasnt worked, is there a better way to partition the SD card for use with the rom?
you can see the partition in your sd by root explorer apk. or you can dowload to your pc mini tool partition magic an you can manage your partitions. windows doesn't see it.
Theres no mention when partitioning your SD card that you wont be able to see the partitions, i think they should mention that in the tutorials.
I downloaded gparted to partition my SD card & when i loaded it i could see that it had in fact worked when i had done it before.
I installed Apps2SD+ to see if it would sort out the low memory problem but the phone wouldnt boot, i waited 20 mins but it just stayed at the strtup screen.
I am doin it over again now with the partition size you suggested so hopefully this will work, should this allow more space for apps with this partition size?
i used the rom you try to use a few days ago. you dont have to install apps2sd etc. the rom just do that. so wipe everything and flash the rom, you will not face any room problem. to free some ram,you can use built in task manager or a task killer.
Hey mutil i have reinstalled the rom & it seems to be working great, but how do i use apps2SD? when i install new apps will they automaticly be installed to the SD card now, or do i have to chose the options somehow? thx.
yes they will go directly to sd-ext. if some applications like angry birds give force close error then get titanium backup from market, find the app that gives errorin titanium, long press on the app then choose 'move to sd'.
mutil thx for that advise. i just wanna ask you, before you installed the rom, what size clockwork mod recovery partition did you use? I used 190 as suggested above, but now reading back through the thread i see you can use a 170mb partition. Is it would be worth me doing it again as a 170mb partition, would i get any benifit do you think?
It doesn't worth to make a new partition. There will not be a great difference. Good luck.
Sent from my HTC HD2 using XDA Premium App
Hello everyone..
I have a real quick question..
1) Used HD2Toolkit4.2.0.1 and performed Wipe (task29)
2) With HD2Toolkit, installed HSPL (bootload shows SPL-2.0.8.HSPL)
3) With HD2Toolkit, installed MAGLDR (reboot and phone goes into MAGDLR)
Heres the problem
1) Go into bootloader and try to install Recovery_v1.3_150 but program does not recognize usb connection. (failed install)
2) Go into MAGDLR and go down to #5 USB Flasher and computer is not recognizing connection between phone and computer.
3) Went into bootloader (bootloader shows "usb" and Tried to install DFT android flasher for HTC LEO but install fails saying: "usb init failed".
4) On MAGDLR screen, i go down to #8 AD Recovery and screen says : No boot sources
What am i doing wrong and why isnt computer acknowledging usb connection with phone and installing progs i need to flash new rom. (using windows 7 ultimate)
I previously performed my first flash to this phone yesterday and everything went just fine. Someone with the know-how please tell me what i am doing wrong and what i should do to complete this properly.
(trying to install Coredroid ONE X)
Thank You
Ok i have figured out how to get clockwordmod recovery installed as well as DFT nanddroid.
but now i am having a problem getting coredroid v3.6 installed. when i use clockworkmod, i partition the sd card using 1024 and 0. then i mount usb, transfer over coredroid v3.6.zip into new temporary F.Drive. After, i install zip from sdcard then choose zip from sdcard. The program locates coredroid and ask to install rom and i execute command. the flash process begins. Once rom is finished loading it freezes up and i have to remove battery. Rom is lost at this point and it goes back into MAGDLR.
What is the problem at this point. ?
What partition size did you use and what is recommended for CoreDroid? Make sure this is correct, otherwise the ROM won't boot.
Noob Dude said:
then i mount usb, transfer over coredroid v3.6.zip into new temporary F.Drive.
Click to expand...
Click to collapse
Don't use MAGLDR's USB Mass Storage, use an SD reader.
@ NIGELDG - Perhaps its the partitition size that could be the problem. But this is the partition i use from the Coredroid instructions.
Using ClockworkMod :
Goto Partition SD Card menu.Select maximum 1024m. (which is recommended from coredroid instructions),then it says to Select the 0m .
@ MARVLESZ - Its not Mass usb storage that im using:
Using ClockworkMOD :
I go to mount USB storage
A new drive is mounted to your PC.
Navigate to MyComputer and open the new drive (ex: F: E: G: etc…)
Go to the HD2_Core_Droid_Desire_HD_V1.12 folder
Copy the HD2_Core_DroidDesire_HD_V1.12.zip to the HD2 sd card root (the new mounted drive ex: F.
When finished copying , i unmount then:
“-install zip from sdcard”, and press call button (left).
“-choose zip from sdcard”, and press call button (left).
Select the CoreDroid_V*.*.zip, and let it install.
Problem is that it will sometimes install 46% of rom then freeze up.
Other times it will load the entire rom up, say its complete then freeze up and not let me continue with reboot.
(Even though the instructions say this is what you use to install coredroid HD2 with, when reading the instructions it says this is for coredroid desire)
Which instructions should i use or what step am i not doing correctly?
Noob Dude said:
@ NIGELDG - Perhaps its the partitition size that could be the problem. But this is the partition i use from the Coredroid instructions.
Using ClockworkMod :
Goto Partition SD Card menu.Select maximum 1024m. (which is recommended from coredroid instructions),then it says to Select the 0m .
Click to expand...
Click to collapse
not that type of partition, thats the ext partition. He means the system partition size you chose when you installed CWM, , that determines which roms you can flash, the rom tells you in post 1 (or 2) teh size you need.
Problem is that it will sometimes install 46% of rom then freeze up.
Other times it will load the entire rom up, say its complete then freeze up and not let me continue with reboot.
<snip>
I previously performed my first flash to this phone yesterday and everything went just fine. Someone with the know-how please tell me what i am doing wrong and what i should do to complete this properly.
Click to expand...
Click to collapse
phone feel warm lower back at all? try chilling it in teh fridge for twenty minutes, see if a flash goes all teh way through. (after first confirming the system partition size as mentioned)
ok.. ill try that.. thank you
Help once again....
Where can i locate the necessary partition needed to successfully install coredroid . ?? Do i partition it with HDToolkit? or clockworkmod?
I know that clockworkmod recovery performs an sd card partition but according the coredroid DHD instructions it says to partition 1024 and then 0 (dont understand the reason for this partition) Each time i follow the coredroid instructions, the farthest i get is to installing the rom but once its reached 100% and says to continue for reboot, the phone freezes and i cannot reboot. when i take the battery out to reboot, it goes back to clockwork (or is it magdlr, but no coredroid rom is loaded.
If ANYONE that has flashed: HD2 CoreDroid GB 2.3.5 V3.7 & Froyo 1.8 , PLEASE find the time to give me the step-by-step on which partition size (what program to partition it-HD2toolkit i presume) and the necessary steps to install this correctly. ill send you a cyber case of ShockTop or Heineken.
The 1024 and 0 refer to creating the ext partition on the SD card through cwm,,, namely 1gb ext and 0 swap.
What you need is the partition size needed for the system partition. It will tell you in post 1 of that roms thread,, usually something like " 5/150/5" and in this case you use the toolkit,, choose 150 on the left, put 5 in the cache box below, then click repartition.
samsamuel said:
The 1024 and 0 refer to creating the ext partition on the SD card through cwm,,, namely 1gb ext and 0 swap.
What you need is the partition size needed for the system partition. It will tell you in post 1 of that roms thread,, usually something like " 5/150/5" and in this case you use the toolkit,, choose 150 on the left, put 5 in the cache box below, then click repartition.
Click to expand...
Click to collapse
ok so with that being said:
1) Load Hdtoolkit
2) Perform task 29 wipe
3) With HDTK, partition 150 and cache 5 (if according to threads recommendation for particular rom)
4) (im assuming i wont have to reinstall HSPL 2.08 correct)
5) With HDTK install MAGDLR
6) Install clockworkmod rec. (not from HDTK)
7) load clockwork and partition EXT 1024 and 0
8) Load rom from zip
9) that should be it.?
Anything im missing or anything i should add? And what if i like my current rom better than the new rom i just installed. Anyway of preserving that? or just install it again?
Pretty much, but a few notes...
2) no need to task29 99 times in 100. Only if you are having real troubles. Its rarely needed, and just increases odds of getting bad blocks.
3) 5) and 6)
Performing the partition installs cwm at the same time, and no need to reinstall magldr (unless you lost it by doing task29)
if you did the steps you listed, step 3 couldn't work (because no magldr) and would be pointless anyway, because step 6 is exactly the same as step 3. "Partitioning" and "installing cwm) are the same thing.
4) correct, Hspl and the radio are two things you needn't worry about unless you flash a stock winmo rom.
problem partitioning
Ok... im going to give it a shot with installing this new rom.
Ran into a snag though... coredroid says the following:
boot 10
system 180
cache 10
Now ive just done a task29 with HDTOOLKIT.. (successful wipe).
Ive placed phone in bootloader
With HDtoolkit - MAGDLR Repartition set at 200 (since there is no 180) and Cache is set at 10. ( i dont see boot on tooklit)
Execute Repartition BUT DFT is stating: (USB init failed)
(bootloader on phone says USB)
Whats the problem or what am i not doing right or missing?.
sams the man
samsamuel said:
Pretty much, but a few notes...
2) no need to task29 99 times in 100. Only if you are having real troubles. Its rarely needed, and just increases odds of getting bad blocks.
3) 5) and 6)
Performing the partition installs cwm at the same time, and no need to reinstall magldr (unless you lost it by doing task29)
if you did the steps you listed, step 3 couldn't work (because no magldr) and would be pointless anyway, because step 6 is exactly the same as step 3. "Partitioning" and "installing cwm) are the same thing.
4) correct, Hspl and the radio are two things you needn't worry about unless you flash a stock winmo rom.
Click to expand...
Click to collapse
ok samsamuel.
1) i tasked 29.. (sorry didnt catch your other post about overwiping the phone)
2) checked to make sure hspl is one the phone still (bootloader)
3) kept phone in bootloader mode (shows USB connection)
4) selected MAGDLR Repartition on HD2TK
5) Set System Partition at 200 (since 180 is not avavilable as stated on coredroid page one )
6) Set Cache at 10 (according to coredroid)
7) Executed Repartition.
8) DFT tries to parttition phone but says USB Init Failed.
Where is the problem here?
You can set 180 by choosing custom at end of sizes list.
Phone should be in magldr - USB flasher mode, not bootloader.
Ok ive done everything according to what has to be done... thanks a million guys..!!!! BUT!!!
1) installation completed.
2) Rom says to REBOOT NOW
3) Pressed green call button to confirm
4) Screen says: Thanks and enjoy your new firmware with FINISH button at bottom.
5) Try to execute FINISH button but seems as though screen is frozen.
Anyone who has installed this rom before, is this common? Should i wait?
Each time it does this, I remove the battery and it goes back to MAGDLR.
Help please!!
ok... ive got it...!!!! ive figured out that the coredroid ONE rom must not be compatible with the hd2.. but when i ran coredroid DHD v3.7 it installed automatically...
i really want to say thank you to all you guys that pitched in with helping an old geezer like me. i know your time is more important, but you were considerate enough to give a hand. it was truly appreciated!! Thanks again Samsamuel....
Hi,
I am currently using Rom from tyween: http://forum.xda-developers.com/showthread.php?t=933951 and I would like to install a new one from Tytung http://forum.xda-developers.com/showthread.php?t=2224469 .
My questions:
1. in description of tytungs Rom is stated that NAND version is for USA T-mobile so I assume that with my international version I have to use the other two versions and if so then the only way to install it is using aurora installer?
2. Nevertheless I tried NAND version installed it using CWM but then it got stuck on loading screen, could this problem be solved by this patch? http://forum.xda-developers.com/showpost.php?p=40623956&postcount=821
3. Is it possible to use Rom Manager to install this Rom? I have only tried CWM method and this one seems also really easy to use.
Thank you for your answers!!!
peter.l said:
Hi,
My questions:
1. in description of tytungs Rom is stated that NAND version is for USA T-mobile so I assume that with my international version I have to use the other two versions and if so then the only way to install it is using aurora installer?
Click to expand...
Click to collapse
Nand is divided into two: 1- Pure Nand (EVERYTHING is on the NAND of the device) and 2- Nand with DataOnExt (as the name implies, some of the data will be stored on an EXT partition on your SD card).
Since the international version of the HD2 only has about half a gig of storage, if you fit everything into the NAND you won't have enough space left for you to install apps and whatnot. If you want it on NAND, you need to choose the second option (some data on the sdcard), but you need to make sure you have an EXT partition on your sd card first (if you don't know how to make one, search).
And "aurora" (you mean aroma*) is just a path, it IS like you said THE installer. It's got nothing to do with your installation. It is just a fancy make-up for the old installation method. Yes, you'll have to use it.
peter.l said:
2. Nevertheless I tried NAND version installed it using CWM but then it got stuck on loading screen, could this problem be solved by this patch? http://forum.xda-developers.com/showpost.php?p=40623956&postcount=821
Click to expand...
Click to collapse
No, that patch is for something else. Your problem is different.
If you mean:
1- NAND Only, then you may have not made enough partition space for the system. (Either way, you shouldn't use this one, use NAND WITH dataonext).
but if you mean 1- NAND with DataOnExt, then it is either your partition size is too small or you do not have a proper sdcard ext partition.
peter.l said:
3. Is it possible to use Rom Manager to install this Rom? I have only tried CWM method and this one seems also really easy to use.
Thank you for your answers!!!
Click to expand...
Click to collapse
It's the same thing. When you select "Install ROM" in ROM Manager, it will actually reboot your device into CWM and you will have to follow the steps of Aroma as well. Yes, you can use it if you have cLK bootloader and not magldr.
You are welcome
According to your answer, I have to download AROMA installer and use it for installing new Rom. In DataOnExt version will 1 Gb partition be enough?
peter.l said:
According to your answer, I have to download AROMA installer and use it for installing new Rom. In DataOnExt version will 1 Gb partition be enough?
Click to expand...
Click to collapse
No, Aroma is *included* in the .zip file of the ROM. Just download the ROM, flash from recovery normally but instead of the usual text of procedure, you'll see a fancy screen where you get to configure the ROM before it is installed.
In my opinion, yes, 1GB is more than enough.
recover
Hi.i can not enter to recovery in this rom.Can someone help me.I installed by cwn
exlord1 said:
Hi.i can not enter to recovery in this rom.Can someone help me.I installed by cwn
Click to expand...
Click to collapse
CWM is independent from the ROM you install.
If you are talking about "boot into recovery" from within the ROM, that's a rom's feature and does not have to be included in it. You can reach the recovery by rebooting your phone into MAGLDR and then choosing the option AD. Recovery or something like that.
Just to add a little to Marvlesz's answer, reboot into recovery/bootloader on any ROM will just reboot the phone normally if you have MAGLDR. To access CWM just hold power for the MAGLDR menu then select 8. AD Recovery. If you use cLK on the other hand, reboot into recovery does work if I'm not mistaken.
I tried to install this ROM using various settings (DataOnExt / Native SD, wipe/no wipe, magldr / ppp...) but phone always ends up rebooting itself after htc loading screen. I did partition SD card to FAT 32 (primary) and 1GB EXT4 (primary).
What could be the problem and how to solve it?
Thank you!
peter.l said:
I tried to install this ROM using various settings (DataOnExt / Native SD, wipe/no wipe, magldr / ppp...) but phone always ends up rebooting itself after htc loading screen. I did partition SD card to FAT 32 (primary) and 1GB EXT4 (primary).
What could be the problem and how to solve it?
Thank you!
Click to expand...
Click to collapse
It could literally be ANYTHING. Follow this guide:
http://forum.xda-developers.com/showpost.php?p=16528026&postcount=7
and I think you'll be good, please read everything there.
peter.l said:
I tried to install this ROM using various settings (DataOnExt / Native SD, wipe/no wipe, magldr / ppp...) but phone always ends up rebooting itself after htc loading screen. I did partition SD card to FAT 32 (primary) and 1GB EXT4 (primary).
What could be the problem and how to solve it?
Thank you!
Click to expand...
Click to collapse
What /system partition size did you use? Make sure it's big enough for the ROM you're trying to flash.
Nigeldg said:
What /system partition size did you use? Make sure it's big enough for the ROM you're trying to flash.
Click to expand...
Click to collapse
EXT4 = 1GB. I partitioned SD card with Mini Tool Partition Wizard, then copied Zip on SD card, wiped data (factory reset + dalvik) installed ROM. To me it feels like I did everything according to instructions...
peter.l said:
EXT4 = 1GB. I partitioned SD card with Mini Tool Partition Wizard, then copied Zip on SD card, wiped data (factory reset + dalvik) installed ROM. To me it feels like I did everything according to instructions...
Click to expand...
Click to collapse
No, not your SD EXT partition, the partition you flashed when flashing CWM.
Nigeldg said:
No, not your SD EXT partition, the partition you flashed when flashing CWM.
Click to expand...
Click to collapse
I have 150 mb. So for this ROM should I use 250 or 400?
peter.l said:
I have 150 mb. So for this ROM should I use 250 or 400?
Click to expand...
Click to collapse
285. To create that, go to wherever your CWM thing is stored on your PC, open the CWM folder, open the file flash.cfg (not flash.cfg.txt.) in notepad (it should open in this way automatically) then change the value next to the line beginning 'SYSTEM...' from 150 to 285, keeping everything else exactly the same.
if you have questions or problems with rom
post them here not in the rom thread
failure to add the info below will result in your question not being answered untill you add the below info to your post
when posting about a problem please include which install you used [nand, dataonext or nativesd]
which bootloader you are using [clk or magldr]
and what partition size you used if its a nand or dataonext install
and any relevant information you can think of ::: for instance..[i installed poweramp and my problem started
this is a small tutorial on how i flash this rom
first off i have a 430 system partiton and a 4 gig ext 4 partition
i also use Kokotas black clk 1.5.1.9 and CWM Recovery Touch Beta 8 Release Candidate 1
and i use the dataonext install method
first thing i do is do a backup of the rom i have on my phone
then i move the rom zip to my sdcard
i then go into mounts and storage and
format boot
format cache
format data
format system
format sd-ext
be carefull not to format sdcard
i then got into install zip from sd card then choose zip from sdcard
then i pick the rom zip and and go thru the setup on aroma and choose the things i want to install
when it finishes i reboot and let it sit at the lockscreen for 5 minutes
then i go thru the setup and add my gmail account
when its done with the setup stuff i once again let the phone sit for 5 minutes
then i reboot one more time and begin fully setting up the phone the way i like it
i add alot of modded stuff to my phone for testing and regular use
and the way i posted above has never failed me
link for CWM Recovery Touch Beta 8 Release Candidate 1
http://forum.xda-developers.com/showthread.php?t=1419733
link to kokotas blk clk
http://www.mediafire.com/?tzg7whl9wwaih
Hi Pixeldroid.
It is an awesome rom again. But I have again huge battery drain. And I saw that most is due to Google Services. Now my battery is in 5 Hours from 100% full to 25% empty. Google services is taking 42% of battery drain. Is it possible to shutdown Google services? I have allready did the following: Settings/ Accounts/ Google/ Accounts Sync OFF.
I found where to stop Google services, but I don't know if it wil give me problems with the rom.
Settings/ Apps/Active now/ Google services
I have stopped them all and wil see what happens.
re
Kajoe said:
Hi Pixeldroid.
It is an awesome rom again. But I have again huge battery drain. And I saw that most is due to Google Services. Now my battery is in 5 Hours from 100% full to 25% empty. Google services is taking 42% of battery drain. Is it possible to shutdown Google services? I have allready did the following: Settings/ Accounts/ Google/ Accounts Sync OFF.
I found where to stop Google services, but I don't know if it wil give me problems with the rom.
Settings/ Apps/Active now/ Google services
I have stopped them all and wil see what happens.
Click to expand...
Click to collapse
for me is the battery drain good. have you change the display settings?
pixelfreak
thanks for great job
Navitel V 5 works with this ver of rom ?
very nice rom
cheers!
Hello to all
I am on Data on ext .My sd(class6 samsung) is an 2gb ext3 and 14gb fat 32 ( formatet with touch recovery,also tryed with ext4 made with minitool partition wizard same issue came))
I also use clk 1,5,0 rc1
My layout is big enough i think.
recovery 7mb
misc 3 mb
boot 7 mb
system 370 mb
cache 7 mb
userdata 27 mb
If i put in my sim card always after pin the message apperars "com.android.phone" stopped and i have to write my pin again.
I can not use my phone. Every 5 seconds this message appears.
Can you please help me?
sincerealy
Mr.NeoTrinity said:
Hello to all
I am on Data on ext .My sd(class6 samsung) is an 2gb ext3 and 14gb fat 32 ( formatet with touch recovery,also tryed with ext4 made with minitool partition wizard same issue came))
I also use clk 1,5,0 rc1
My layout is big enough i think.
recovery 7mb
misc 3 mb
boot 7 mb
system 370 mb
cache 7 mb
userdata 27 mb
If i put in my sim card always after pin the message apperars "com.android.phone" stopped and i have to write my pin again.
I can not use my phone. Every 5 seconds this message appears.
Can you please help me?
sincerealy
Click to expand...
Click to collapse
where did you come up with userdata 27 mb
Kameirus said:
where did you come up with userdata 27 mb
Click to expand...
Click to collapse
Hello Kameirus
First ,thanks for replying )
I dont know where the 27 mb of userdata came from??
In the clk 1.5.0.1 there is no option under settings to change that. I only have the options
recovery ,misc,boot,cache and system.
sincerealy )
Mr.NeoTrinity said:
Hello Kameirus
First ,thanks for replying )
I dont know where the 27 mb of userdata came from??
In the clk 1.5.0.1 there is no option under settings to change that. I only have the options
recovery ,misc,boot,cache and system.
sincerealy )
Click to expand...
Click to collapse
how did you install clk on your phone
do you have a tmobile hd2 if yes can you bump up the system partition size to 400 or 410 and see what happens
i always use a 410 size
Kameirus said:
how did you install clk on your phone
do you have a tmobile hd2 if yes can you bump up the system partition size to 400 or 410 and see what happens
i always use a 410 size
Click to expand...
Click to collapse
Hello )
I did the clk install via an custom .ruu .
I am honest. I forgott what kind it is. Its so long ago that i changed from wimo 6.5 to android. About 3 years.
I can say two things about it. It is an German one and the original vodafone rom is not allow when i try to install it.
So the chance is well to an Tmobile phone.
Sorry for my bad englisg. I will try my best.
sincerealy
Thanks of course for reply !
re
Mr.NeoTrinity said:
Hello Kameirus
First ,thanks for replying )
I dont know where the 27 mb of userdata came from??
In the clk 1.5.0.1 there is no option under settings to change that. I only have the options
recovery ,misc,boot,cache and system.
sincerealy )
Click to expand...
Click to collapse
make your phone comlete new with the tools from my first post.
- new HSPL
- new bootloader with recovery and cache
it may be that you have an outdated version of HSPL on your phone. or have you ever been something changed on your phone? sorry i did not read all your posts
pixelfreak
-pixelfreak- said:
make your phone comlete new with the tools from my first post.
- new HSPL
- new bootloader with recovery and cache
it may be that you have an outdated version of HSPL on your phone. or have you ever been something changed on your phone? sorry i did not read all your posts
pixelfreak
Click to expand...
Click to collapse
Hello
hanks for helping.
I tryed with hspl 2.08 and 3.03. I always used since release the clk 1.5.0.1 rc1.
With "the tools from your post " ,do you mean the hd2 toolkit or something else?
sincerealy
re
Mr.NeoTrinity said:
Hello
hanks for helping.
I tryed with hspl 2.08 and 3.03. I always used since release the clk 1.5.0.1 rc1.
With "the tools from your post " ,do you mean the hd2 toolkit or something else?
sincerealy
Click to expand...
Click to collapse
yes. i work only with the HD2 Toolkit and MiniToolPartition Wizard Home Edition and i have no problem.
make for me a step by step list from your install and your sizes from recovery and cache. write me all your settings in the install tools
pixelfreak
-pixelfreak- said:
yes. i work only with the HD2 Toolkit and MiniToolPartition Wizard Home Edition and i have no problem.
make for me a step by step list from your install and your sizes from recovery and cache. write me all your settings in the install tools
pixelfreak
Click to expand...
Click to collapse
Hello
Yes of course.
1 task 29
2 flash custom.ruu (the clk 1.5.0.1rc1
3 Make Partitions like below
recovery 7mb
misc 3 mb
boot 7 mb
system 370 mb
cache 7 mb
userdata 27 mb ( i cant change that value anywhere)
4 boot into cwm
5 format boot,cache,system and ext partition
6 switch off
7 put in sd 16 gb (11,5gb fat32 cluster default,2.5gb ext4/ext3 tested with both,290 swap all the things done with partition tool wizard)
8 flash rom
9 wipe dalvik cache ( also tested with wipe of dalvik cache and cache.
10 reboot with insert sim
11 com.android.phone unfortunatelly stopped
sorry for my english. feel free to correct me.i am willing to learn
sincereally )
re
Mr.NeoTrinity said:
Hello
Yes of course.
1 task 29
2 flash custom.ruu (the clk 1.5.0.1rc1
3 Make Partitions like below
recovery 7mb
misc 3 mb
boot 7 mb
system 370 mb
cache 7 mb
userdata 27 mb ( i cant change that value anywhere)
4 boot into cwm
5 format boot,cache,system and ext partition
6 switch off
7 put in sd 16 gb (11,5gb fat32 cluster default,2.5gb ext4/ext3 tested with both,290 swap all the things done with partition tool wizard)
8 flash rom
9 wipe dalvik cache ( also tested with wipe of dalvik cache and cache.
10 reboot with insert sim
11 com.android.phone unfortunatelly stopped
sorry for my english. feel free to correct me.i am willing to learn
sincereally )
Click to expand...
Click to collapse
1 task 29 / thats okay if you make with HD2 TOOL
2 flash custom.ruu (the clk 1.5.0.1rc1 / this is not okay.please install your bootloader with HD2 TOOL
3 Make Partitions like below
recovery 7mb / this size is not from HD2 TOOLKIT
misc 3 mb / this size is not from HD2 TOOLKIT
boot 7 mb / this size is not from HD2 TOOLKIT
system 370 mb / with HD2 TOOLKIT for EU=360MB and for TmoUS=410MB
cache 7 mb / with HD2 TOOLKIT 5MB
userdata 27 mb ( i cant change that value anywhere) / this size is not from HD2 TOOLKIT
4 boot into cwm
5 format boot,cache,system and ext partition / your phone is clean and you must not format
6 switch off
7 put in sd 16 gb (11,5gb fat32 cluster default,2.5gb ext4/ext3 tested with both,290 swap all the things done with partition tool wizard) /EXT4 with cluster default?
8 flash rom
9 wipe dalvik cache ( also tested with wipe of dalvik cache and cache.
10 reboot with insert sim
11 com.android.phone unfortunatelly stopped / this is a sign for not enough space
pixelfreak
Apps problem
Hi,
I installed, this rom Nand + data OnExt, and in some application, like Facebook (from market), if i get i want to see one group, for example, the app close down (black and out). App like, Airdroid, if i go to setting he shuts down. and others apps, like dolphin, or the default browser.. :\
What i can see, seems that when is "processing" the programs close down.
Sorry for my bad English, i wish you can understand the problem.
Edit: Clk instaltion with 2 GB EXT4 cluster default / SWAP 256 MB / the rest FAT32 cluster default , Sandisk , 8gb , class uhc
re
kakashiii said:
Hi,
I installed, this rom Nand + data OnExt, and in some application, like Facebook (from market), if i get i want to see one group, for example, the app close down (black and out). App like, Airdroid, if i go to setting he shuts down. and others apps, like dolphin, or the default browser.. :\
What i can see, seems that when is "processing" the programs close down.
Sorry for my bad English, i wish you can understand the problem.
Edit: Clk instaltion with 2 GB EXT4 cluster default / SWAP 256 MB / the rest FAT32 cluster default , Sandisk , 8gb , class uhc
Click to expand...
Click to collapse
what is the size from your recovery and cache? EXT4?
pixelfreak
Quote:
Originally Posted by kakashiii
Hi,
I installed, this rom Nand + data OnExt, and in some application, like Facebook (from market), if i get i want to see one group, for example, the app close down (black and out). App like, Airdroid, if i go to setting he shuts down. and others apps, like dolphin, or the default browser.. :\
What i can see, seems that when is "processing" the programs close down.
Sorry for my bad English, i wish you can understand the problem.
Edit: Clk instaltion with 2 GB EXT4 cluster default / SWAP 256 MB / the rest FAT32 cluster default , Sandisk , 8gb , class uhc
what is the size from your recovery and cache? EXT4?
pixelfreak
Click to expand...
Click to collapse
hi, the size that you say "install Recovery with 360 MB System and 5 MB Cache" , clk , 360 , 5mb. And the sd, formated with partition wizard. ext 4, 2gb
-pixelfreak- said:
what is the size from your recovery and cache? EXT4?
pixelfreak
Click to expand...
Click to collapse
hi, the size that you say "install Recovery with 360 MB System and 5 MB Cache" , clk , 360 , 5mb. And the sd, formated with partition wizard. ext 4, 2gb
i flashed NexusHD2-JellyBean-CM10.1_V2.4 rom on HD2 using native SD method,everything worked and when it rebooted the logo kept on the start screen for some time atleast 30minute before i pulled out the battery,is that rom not working?then flashed same rom but V2.2 and this time it booted up in 10minute but its some what slow,which i read in the comments as well,which version of jellybean will be good to go then?
also i used a 2gb sd card,i kept half of it for sd storage n other half for apps as ext4 internal storage but when i checked storage it showed only 114mb free out of some 845mb,where is rest of the memory gone?there are not much default apps to take up all the space?
also whenever i try to install facebook app,it says not enough memory/storage but when i install other apps they work fine,i even tried downloading .apk offline,moved to sd and installed but same error,the other half as sd storage still has good 745mb free
if i need to install games or more apps,they will install on internal memory or on sd card,does this means i can not install big games?
also whenever i try to play HD movies,they stuck alot,maybe they'll work fine on some custom rom having 720p playback option?
i don't know much about flashing,so far i have only used nand flash using cwm and native sd for this
Thankyou for your time..
try full formatting the sd card and repartition it ... ( primary fat32 and primary ext4)
try flashing rom using nand method and immediately flash this patch after it ...
this method is very good and very fast ...
and the best rom of between newest roms is NexusHD2 CM10.1.2 v2.6
i think problem with NativeSD because of your memory ext partition
mosi hd2 said:
try full formatting the sd card and repartition it ... ( primary fat32 and primary ext4)
try flashing rom using nand method and immediately flash this patch after it ...
this method is very good and very fast ...
and the best rom of between newest roms is NexusHD2 CM10.1.2 v2.6
i think problem with NativeSD because of your memory ext partition
Click to expand...
Click to collapse
i did formatted it first then i used MiniTool Partition Wizard to make 2 primary partitions,one as fat n other as ext4 and then i flashed it using native sd from MAGLDR
for NAND flash i had been using CWM which has options of 150 250 n 400mb partitions,now if i want to use 2gb card,half for both like before,i'll use same application to make partition but then can you tell me how to flash this rom using nand?
i mean i know one way is CWM and other is that i can use usb flasher which i never used but for that i need to execute DAF but whenever i unzip a rom,i dont see any DAF file,n also how to flash this file which you suggested.
with the current rom,i have only 64mb left for internal memory out of 900mb ext4 partiton that i made :S
and whenever it tried to update any app,it says not enough space
now i remember,this was also one way to select internal storage size
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
but what is CWM partition for?if i select 1gb from 2gb for apps,then 1gb is left for music etc but CWM space is for rom then? or should i just skip it then
i am confused now,if this is not for internal storage then what is this space for? also how much cwm size should be selected n how much space does rom takes?
so i'll go with this latest rom
thank you for your help again.
chaudhary9 said:
i did formatted it first then i used MiniTool Partition Wizard to make 2 primary partitions,one as fat n other as ext4 and then i flashed it using native sd from MAGLDR
for NAND flash i had been using CWM which has options of 150 250 n 400mb partitions,now if i want to use 2gb card,half for both like before,i'll use same application to make partition but then can you tell me how to flash this rom using nand?
i mean i know one way is CWM and other is that i can use usb flasher which i never used but for that i need to execute DAF but whenever i unzip a rom,i dont see any DAF file,n also how to flash this file which you suggested.
with the current rom,i have only 64mb left for internal memory out of 900mb ext4 partiton that i made :S
and whenever it tried to update any app,it says not enough space
now i remember,this was also one way to select internal storage size
but what is CWM partition for?if i select 1gb from 2gb for apps,then 1gb is left for music etc but CWM space is for rom then? or should i just skip it then
i am confused now,if this is not for internal storage then what is this space for? also how much cwm size should be selected n how much space does rom takes?
so i'll go with this latest rom
thank you for your help again.
Click to expand...
Click to collapse
first, go to Setting > App and look at the total internal storage size ... if it is lower than your ext4 partition, then you installed rom with nand method ( no nand with DataOnExt or nand with extra patches. then ext partition is Inefficient )
for your problem, i suggest you that install rom with clk method ...
Here is the step-by-step guide to do it
1- create 1024MB Ext4 (primary) with minitool partition ( guide . sorry for its language it's persian but it's not unclear )
2- power off hd2
3- hold Volume- and power button ( It will load into ‘Red, Green, Blue and White’ screen bootloader )
4- hspl 2.08 (in RGBW screen ) - download
5- task29 (in RGBW screen ) - download
6- radio 2.12 or 2.15 (in RGBW screen ) - download
7- back clk (in RGBW screen ) - download
8- now, your phone will boot up into android bootloader (a black page) . go to "setting" > "resize partition" and set a partition table that match with your rom.
9- press back button and go to recovery .
10- full wipe ( press wipe "data/factory reset", "wipe cache partition" , battery and dalvike (in advenced) )
11- now install zip form sd-card ( i recommend install NexusHD2 CM10.1.2 v2.6 with DataOnExt method ) ...
12- reboot
13- enjoy
mosi hd2 said:
first, go to Setting > App and look at the total internal storage size ... if it is lower than your ext4 partition, then you installed rom with nand method ( no nand with DataOnExt or nand with extra patches. then ext partition is Inefficient )
for your problem, i suggest you that install rom with clk method ...
Here is the step-by-step guide to do it
1- create 1024MB Ext4 (primary) with minitool partition ( guide . sorry for its language it's persian but it's not unclear )
2- power off hd2
3- hold Volume- and power button ( It will load into ‘Red, Green, Blue and White’ screen bootloader )
4- hspl 2.08 (in RGBW screen ) - download
5- task29 (in RGBW screen ) - download
6- radio 2.12 or 2.15 (in RGBW screen ) - download
7- back clk (in RGBW screen ) - download
8- now, your phone will boot up into android bootloader (a black page) . go to "setting" > "resize partition" and set a partition table that match with your rom.
9- press back button and go to recovery .
10- full wipe ( press wipe "data/factory reset", "wipe cache partition" , battery and dalvike (in advenced) )
11- now install zip form sd-card ( i recommend install NexusHD2 CM10.1.2 v2.6 with DataOnExt method ) ...
12- reboot
13- enjoy
Click to expand...
Click to collapse
i added up internal storage n sd storage,all adds up to 1.8gb,but internal storage shows 754mb used :S
went to storage,it shows total internal storage as 845mb,available 62mb n apps using 188mb n where is rest of it
anyways i'll try the procedure suggested by you
if i create 1024mb ext4 partition then should i leave the rest as fat by splitting the storage as ext4 n fat32 or just format whole sd card and just partition 1024 as ext4
saw the pdf,i think first i just resize to free up 1024mb then create partition of it then format it n then apply
i tested it without applying,there is no format option for newly created partition so it means i'll format the other space which is old one?
rest will stay as it is
i has hspl n radio,no task 29 done by me ever,but i think i need to start from first step1 again
how much space to partition for the rom v2.6 one?like if zip is 204mb so that much space or space that it will take after unzip
n u mentioned something in 11th step,i dont know what does this means:
" with DataOnExt method"
btw can we flash any rom using nand,i thought only nand roms can be flashed by nand n specific ones for native sd,like there is one miui rom,when i flash it using nand cwm or native sd,it asks if you want to flash using nand or sd with ext,either way after flashing it,it says change boot to native sd at end but htc logo disappears,screen becomes blank at reboot and nothing shows up,rom name is "miuiandroid_hd2_jb-3.6.28"
thanks for your help :good:
chaudhary9 said:
i added up internal storage n sd storage,all adds up to 1.8gb,but internal storage shows 754mb used :S
anyways i'll try the procedure suggested by you
if i create 1024mb ext4 partition then should i leave the rest as fat by splitting the storage as ext4 n fat32 or just format whole sd card and just partition 1024 as ext4
saw the pdf,i think first i just resize to free up 1024mb then create partition of it then format it n then apply
rest will stay as it is
i has hspl n radio,no task 29 done by me ever,but i think i need to start from first step1 again
how much space to partition for the rom v2.6 one?like if zip is 204mb so that much space or space that it will take after unzip
thanks for your help :good:
Click to expand...
Click to collapse
destroy all partitions on your sd.
now create 1GB primary fat32 and 1GB primary Ext4 like guide.now you have a ext partition for apps and fat32 partition for data and it's good
Code:
285mb for minimum
320mb for full
mosi hd2 said:
destroy all partitions on your sd.
now create 1GB primary fat32 and 1GB primary Ext4 like guide.now you have a ext partition for apps and fat32 partition for data and it's good
Code:
285mb for minimum
320mb for full
Click to expand...
Click to collapse
thanks
i'll try this today
btw besides space issue,this rom is quite slow n one new issue that whenever some one calls,there is no volume for ringtone though vibration works fine,i hope this issue gets resolved in next rom too
u mentioned something in 11th step,i dont know what does this means:
" with DataOnExt method"
can you explain this?
also can we flash any rom using nand,i thought only nand roms can be flashed by nand n specific ones for native sd,like there is one miui rom,when i flash it using nand cwm or native sd,it asks if you want to flash using nand or sd with ext,either way after flashing it,it says change boot to native sd at end but htc logo disappears,screen becomes blank at reboot and nothing shows up,rom name is "miuiandroid_hd2_jb-3.6.28"
thank you for your help and time :good:
chaudhary9 said:
thanks
i'll try this today
btw besides space issue,this rom is quite slow n one new issue that whenever some one calls,there is no volume for ringtone though vibration works fine,i hope this issue gets resolved in next rom too
u mentioned something in 11th step,i dont know what does this means:
" with DataOnExt method"
can you explain this?
also can we flash any rom using nand,i thought only nand roms can be flashed by nand n specific ones for native sd,like there is one miui rom,when i flash it using nand cwm or native sd,it asks if you want to flash using nand or sd with ext,either way after flashing it,it says change boot to native sd at end but htc logo disappears,screen becomes blank at reboot and nothing shows up,rom name is "miuiandroid_hd2_jb-3.6.28"
thank you for your help and time :good:
Click to expand...
Click to collapse
slow?
nexus v2.6 is very fast and smooth ... :laugh:
and low sound on ringtones is bug of most 4.1+ roms that it fixed somewhat by tytung ( low sound fixer )
nand with dataonext is a installation method which allow you to use ext partition as internal storage ... and install more apps ...
During installation of the ROM in one step, you have to choose between "Nand", "Nand with DataOnExt","NativeSD" and i would recommend nand with dataonext
mosi hd2 said:
slow?
nexus v2.6 is very fast and smooth ... :laugh:
and low sound on ringtones is bug of most 4.1+ roms that it fixed somewhat by tytung ( low sound fixer )
nand with dataonext is a installation method which allow you to use ext partition as internal storage ... and install more apps ...
During installation of the ROM in one step, you have to choose between "Nand", "Nand with DataOnExt","NativeSD" and i would recommend nand with dataonext
Click to expand...
Click to collapse
thanks for in time reply
i was reading this thread and thought that i'd have to do all steps in post 2 for dataonext,thats a relief
http://forum.xda-developers.com/showthread.php?t=1843062
btw do i have edit flash.cfg file to make partition of 285mb size as normally it would either be 250 or 400mb
i saw this on forum but it was for 200mb:
Code:
misc ya 1M
recovery rrecov|ro|nospr 5M cwm_recovery_leo.img
boot yboot|ro 5M
system ya 200M
cache ya 2M
userdata ya|asize|hr allsize
what changes should i do to make it 285mb as i saw on his forum that full version requires 285 n min 200mb
just change system from 200 to 285 with no change in others?
for 400mb it was like this
Code:
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 5M
system ya 400M
cache ya 4M
userdata ya|asize|hr allsize
but since i'll use clk to partition so i think i wont have this option right?
dont want to make 400mb space when it requires alot less as that will eat up space for apps i think.
i thought even normal flash like native sd also used internal storage for apps etc,i think current rom v2.2 is slow for me because of sd card having class 4.
chaudhary9 said:
thanks for in time reply
i was reading this thread and thought that i'd have to do all steps in post 2 for dataonext,thats a relief
http://forum.xda-developers.com/showthread.php?t=1843062
btw do i have edit flash.cfg file to make partition of 285mb size as normally it would either be 250 or 400mb
i saw this on forum but it was for 200mb:
Code:
misc ya 1M
recovery rrecov|ro|nospr 5M cwm_recovery_leo.img
boot yboot|ro 5M
system ya 200M
cache ya 2M
userdata ya|asize|hr allsize
what changes should i do to make it 285mb as i saw on his forum that full version requires 285 n min 200mb
just change system from 200 to 285 with no change in others?
for 400mb it was like this
Code:
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 5M
system ya 400M
cache ya 4M
userdata ya|asize|hr allsize
but since i'll use clk to partition so i think i wont have this option right?
dont want to make 400mb space when it requires alot less as that will eat up space for apps i think.
i thought even normal flash like native sd also used internal storage for apps etc,i think current rom v2.2 is slow for me because of sd card having class 4.
Click to expand...
Click to collapse
thanks dear
according to saying the cooker of this rom, 200MB for minimum but experience has shown that more size for system partition (also for other especially system and cache) is better.
for change partition, go to bootloader (back button with power) , go to "setting" > "resize partitions" and set partition table ( misc=1M ,recovery=5M ,boot=5M, system=(285M min and 315 full) ,cache=(2M or 3) )
if you have sd card with high class, it's better to install rom with NativeSD ...
and really 2.2 and 2.6 are far apart ... 2.6 is so faster
mosi hd2 said:
thanks dear
according to saying the cooker of this rom, 200MB for minimum but experience has shown that more size for system partition (also for other especially system and cache) is better.
for change partition, go to bootloader (back button with power) , go to "setting" > "resize partitions" and set partition table ( misc=1M ,recovery=5M ,boot=5M, system=(285M min and 315 full) ,cache=(2M or 3) )
if you have sd card with high class, it's better to install rom with NativeSD ...
and really 2.2 and 2.6 are far apart ... 2.6 is so faster
Click to expand...
Click to collapse
thanks
back button with power while phone is on or when its off?
also i have to do this before flashing or during which step?
i still couldnt get it about native SD,if class is higher then after flashing rom will be faster?
i'll take out the sd card format,partition,transfer the new rom n then put it back in,though clk may have usb storage option like magldr had,but still i cant format sd card while rom is running on it i guess
native SD or nand,how they effect anything,for sd i get it thats its something to do with memory card,nand maybe with internal storage
thank you for all your help
you have been very patient with all my so many questions/
mosi hd2 said:
8- now, your phone will boot up into android bootloader (a black page) . go to "setting" > "resize partition" and set a partition table that match with your rom.
Click to expand...
Click to collapse
or i think i just have to select 315mb in this step instead of going into bootloader with back button and power ?
EDIT
tried back button with power before doing anything,it loaded into magldr
thanks guy
chaudhary9 said:
thanks
back button with power while phone is on or when its off?
Click to expand...
Click to collapse
when its off
chaudhary9 said:
also i have to do this before flashing or during which step?
i still couldnt get it about native SD,if class is higher then after flashing rom will be faster?
Click to expand...
Click to collapse
set partition table before flashing ...
if class is higher, rom is very very faster ...
chaudhary9 said:
or i think i just have to select 315mb in this step instead of going into bootloader with back button and power ?
EDIT
tried back button with power before doing anything,it loaded into magldr
Click to expand...
Click to collapse
if you installed clk after hspl! ask29! & radio! , you shouldn't see magldr ...
please follow guide step by step
mosi hd2 said:
thanks guy
when its off
set partition table before flashing ...
if class is higher, rom is very very faster ...
if you installed clk after hspl! ask29! & radio! , you shouldn't see magldr ...
please follow guide step by step
Click to expand...
Click to collapse
i followed all the steps,it was very easy but after rebooting at the end,it boots in recovery?
with magldr there used to be an option of boot nand but there no such thing for clk so whats wrong here?
also you said rom is very fast with higher class,is that for native sd only or that works for nand with dataonext as well?
when i was flashing it,it showed me internal storage sd space etc all correct where as when i was flashing with native sd it showed me few of them as -1 so i guess everything worked well except for not booting v2.6 rom
mosi hd2 said:
thanks guy
when its off
please follow guide step by step
Click to expand...
Click to collapse
i have flashed it thrice already following all steps,i noticed that its T mobile so i flashed with just nand only as well but every time it boots into recovery
how much memory card size can hd2 easily handle and can it play hd videos n big hd games without getting stuck,otherwise getting more size card wont be of much use which i was considering n as well as class 10
EDIT
so i got tired and i repeated all steps but with magldr this time,modified space for CWR
n this time it worked
though what i observed when i was flashing with clk i was getting this,even though i set partition of system to 315 3 times
system nand 150mb
free 149
data nand 767mb
free 765
and then with magldr
i got this
sys nand 315mb
free 315
data nand 605mb
free 604
maybe this was the fault,clk wasnt changing system partition and so it wasnt booting
this rom is working great
but market says no connection even though its connected to wifi started working after reboot,relief
internal storage shows 0.93gb total with 753 available 125 for apps,seems some is lost somewhere but atleast its showing most of it,yay
when i making partitions and formatted,applied,it showed some 67mb used from 1024
Did you success to install the rom?
mosi hd2 said:
Did you success to install the rom?
Click to expand...
Click to collapse
yea its working fine
i edited my last post,maybe you didn't saw that
but its working magldr n cwr,didnt worked with clk maybe because it couldnt partition system
chaudhary9 said:
yea its working fine
i edited my last post,maybe you didn't saw that
but its working magldr n cwr,didnt worked with clk maybe because it couldnt partition system
Click to expand...
Click to collapse
good
but clk works fine.
mosi hd2 said:
good
but clk works fine.
Click to expand...
Click to collapse
i dont know i tried 3 times,every time i set partition of system to 315 but while flashing it showed system nand as 150mb but when using cwr it showed it as full 315mb
chaudhary9 said:
i dont know i tried 3 times,every time i set partition of system to 315 but while flashing it showed system nand as 150mb but when using cwr it showed it as full 315mb
Click to expand...
Click to collapse
note: after setting partition table, you must commit change ... then clk will reboot after it
:good: