[Q] Please help :( ... Nexus 7 bricked :( - Nexus 7 Q&A, Help & Troubleshooting

The software on my Nexus 7 went down ( didn't pass the X logo ) ... so I wanted to flash custom ROM with Nexus Root Toolkit ... The device was on the bootloader screen & I powered it off .... Then slept leaving my pc downloading the firmware from google site .. And in the morning the firmware is downloaded , but when I tried to power the nexus 7 to flash the ROM .. I got NO response , not even the charging indicator ...tried all buttons combinations and nothing works ... opened the back and the battery is well plugged ... tried to charge it with asus charger but won't charge ( even the charger is not warm !! ) .... Don't know what happened since the bootloader was working fine .... Is there any solutions ??

Related

[Q] Overheating & Baterry Draining & Hang After about 1 minute

Sorry but i'm just a newbie here. Plz help me ... I'm having someproblem with my SS4 I9500 GSM only model. Just bought it a few days ago and yesterday after I root it with Kingroot everything still ok until I download the TWRP recovery on CHPlay. It show some kind of warning that could affect my SD but I ignore and have it done something to install the TWRP on my phone. After one time reboot my phone started to run real slow , super hot until hang itself and extremely battery draining ( about 25 - 30 % for one time boot till it hang and reboot ). I've tried to reinstall an Original Firmware but couldn't because I can't connect my phone with the PC everytime I tried to connect the cable my PC show the Code Err 23. Device not recognized. . I tried the factory reset but it still operated like that and there's no TWRP but the original recovery of android. Changed the cable , changed the PC , still nothing happened. Someone plz help !!!

Lenovo A3500-HV Bricked while flashing ROM ( Cable disconnected )

OS : Windows 8.1 (With drivers successfully installed ) X64
Also tried on Windows 7 (With drivers successfully installed ) X86
Using SP flash tool
The device had this ROM : A3500HV_A442_01_37_140920_ROW
and it is the same I was trying to flash
Hi all , My lenovo A3500-HV went crazy and I had to re-install the rom ..
but while flashing using SP ( all drivers are OK ) the goddamn cable disconnected at about 15% - 20% from total progress
CURRENT STATE :
DEAD :'(
can't power up , nothing happens after pressing power button
can't go into recovery mode or download mode ( nothing happens when pressing VOL UP & Power , VOL UP & DOWN & Power or any other sequence )
it is not charging when I put it on the charger or the USB
is not being recognized when I plug it in ( see attachments please ) !!
device manager screen shot attached please have a look
-----
any hope it can revive ?? , how ??
or just go to the warranty ( really few days left ) .. note that it was rooted device .. ( ( will they ever detect the root if the device is dead ? ) )​
up
up
Help my update
ebram96 said:
up
Click to expand...
Click to collapse
I Have same problem. Did you have ANY SOLVE ?:angel:
I have same problem too,,Did you find any solution??
p.m.6 said:
I have same problem too,,Did you find any solution??
Click to expand...
Click to collapse
Look the device was stuck at boot but showing nothing on screen .. so I waited till it has 0% battery and re-flashed the rom successfully .. if you still having problems text me I may help
i have the samy problem
i have the same problem but i dont know how to fix it
ebram96 said:
Look the device was stuck at boot but showing nothing on screen .. so I waited till it has 0% battery and re-flashed the rom successfully .. if you still having problems text me I may help
Click to expand...
Click to collapse
is it really works? but i cant even see the screen backlight is turned on. was it the same with yours? how would you know when the battery level is 0%?
then after (we believe) the battery level is 0% you just connect your tab to your computer to make it show up with COM X connection, correct?
hope it really works and not a coincident (':
kakung said:
is it really works? but i cant even see the screen backlight is turned on. was it the same with yours? how would you know when the battery level is 0%?
then after (we believe) the battery level is 0% you just connect your tab to your computer to make it show up with COM X connection, correct?
hope it really works and not a coincident (':
Click to expand...
Click to collapse
YES , the tab backlight was off and there was not any sign of it working and then I lost hope and left it for a while and then I tried the charger and it was recharging so I tried flashing and it worked just fine
Lenovo A3500 bricked, "USB device not recognized"
ebram96 said:
YES , the tab backlight was off and there was not any sign of it working and then I lost hope and left it for a while and then I tried the charger and it was recharging so I tried flashing and it worked just fine
Click to expand...
Click to collapse
Lenovo A3500FL_A422 bricked, "USB device not recognized" when connected to windows, could not flash it using SP Flash Tool.
After disconnected the battery, flash process begun and was OK.
Thanks !
i have the same problem as yours
after i disconnect battry and flash rom it gets error while flashing on 20%
what should i do ?
:crying:
error : S_FT_DOWNLOAD_FAILD (4008)
arshiyah53 said:
i have the same problem as yours
after i disconnect battry and flash rom it gets error while flashing on 20%
what should i do ?
:crying:
error : S_FT_DOWNLOAD_FAILD (4008)
Click to expand...
Click to collapse
i'm manage to get on 40%
but it stuck in that.
error : S_FT_DOWNLOAD_FAILD (4008)
show up.
change the cable, change pc to laptop,
noting happen.
any sugestion?

pls help i don't know what i should do anymore

Hello ..
i have samsung s6 edge + ( sm-g928f ) i love this device and been using it since 3 years ..
yesterday i wonted to root it but couldn't so i road about that and i had to turn off the OEM
after root was every thing good until i enable OEM and restart the device ..
it stak in boot screen with red line ( Binary Blocked by FRP Lock on )
i didn't knew what i should do so i try every thing i know to backup the file i couldn't ,,
finally i fleshed a stocked ROM from Sammobiel and plug it in the charging cable and installed every thing i need from store ..
after that Evey time i unplug the phone from phone 10 sec freeze and turn off so i flashed second time another ROM and third from sammobile
if the phone was unplug and i turn it on when i get the phone menu restart immediately
i tried safe mode the same
what i the problem is it from firmware of from device ( ic ,battery , charging port or .. )
everything work fine when i plug the phone
The main cause would probably be the software, try clearing out all the files in the twrp recovery then reinstall the os, if you still see the same issue after that it would be hardware then
Most likely battery is faulty.
"FRP tool hyjacker" works for me.

My experience with my dead le pro 3 and need help

hi guys this is my first post about le pro 3 phone ( x720 )
Before more than one year i was install custom rom ( panaroid android rom ) and it is the best for me iam installed it via official TWRP and rooted it . but suddenly has loop and i cannot open anything just fastboot screen and when i charging it just i see red light , i tried to flash Qfile via flashone 2.0 tool ( i am installed all drivers needed ), flashed is successful but the problem loop is continue , after that iam going to local market ( in iraq ) they didn't have maintenance for leeco phone but i asked him to remove battery and return it , after doing so, he charged the phone, showed the charge rate and battery, became the battery percentage 55 % and I turned it on, but the problem continued , i flashed qfile again but nothing happened , I left the phone for months, then I gave it to a friend from China where we work together in the same company in Iraq, he took the phone to a maintenance center in China and they repaired it ( they find hardware problem and the replaced element or some thing like that ), My friend gave me the phone works with emui 5.8 and he buy spare battery and he told me that no need to replace battery as maintenance center say , after that just i install twrp and flash emui 6.0.0.30 and make root for it , the phone work fine for one month but also suddenly the system freeze and reboot loop , i tried to inter recovery but the screen black and white lines appeared as in previous problem .
what should i do dear friends
No body here ?

Help phone won't boot hardbricked?

Hey guys i have a samsung sm9005 note 3 and it was working awesome i had it rooted and have tested many custom roms from this forum .
The battery was dying so i replaced it with original battery and it worked perfectly i was on Phronesis Rom N7 v7.0 Feature Rich & Smooth and it was my daily driver untill i decided to flash the [ROM][9.0.0_r37][HLTE/CHN/KOR/TMO] Pixel Experience [AOSP][UnOFFICIAL]
i flashed it successfully through trwp 3 version and it booted properly and i was using it daily i bought a new phone and i kept my note 3 aside for a month i decided to use the phone again and put my note on charge but i dint see any charging light i let it charge for few hours and tried powering on but it didn't . I tried to boot into recovery it didn't . Tried to boot into bootloader mode so that i can flash back the previous rom but it didn't boot into dowload mode
I searched in forum and i believe it's a hard brick and there are solutions like using debrick.img and qfile software but since i had my phone on 9.0 will the debrick.img shared in fourm work?
Please suggest me the solution i dont want this phone to die? please help me resurrect it
Not booting to download mode try the USB recovery jig via google or ebay .
Simple, use another battery to boot it.

Categories

Resources