pls help i don't know what i should do anymore - Galaxy S6 Edge+ Q&A, Help & Troubleshooting

Hello ..
i have samsung s6 edge + ( sm-g928f ) i love this device and been using it since 3 years ..
yesterday i wonted to root it but couldn't so i road about that and i had to turn off the OEM
after root was every thing good until i enable OEM and restart the device ..
it stak in boot screen with red line ( Binary Blocked by FRP Lock on )
i didn't knew what i should do so i try every thing i know to backup the file i couldn't ,,
finally i fleshed a stocked ROM from Sammobiel and plug it in the charging cable and installed every thing i need from store ..
after that Evey time i unplug the phone from phone 10 sec freeze and turn off so i flashed second time another ROM and third from sammobile
if the phone was unplug and i turn it on when i get the phone menu restart immediately
i tried safe mode the same
what i the problem is it from firmware of from device ( ic ,battery , charging port or .. )
everything work fine when i plug the phone

The main cause would probably be the software, try clearing out all the files in the twrp recovery then reinstall the os, if you still see the same issue after that it would be hardware then

Most likely battery is faulty.

"FRP tool hyjacker" works for me.

Related

[Q]Device manager won't discover phone in download mode

Hello , so i have GT-I9500 galaxy s4 phone, I did root this phone before and flashed it once with odin without having any problems , now i have an ECHOE rom with official android 4.4.2 installed , so the android lollipop came out and i wanted to flash my phone again with odin i installed all the required drivers thousand times so it's not a driver problem , when i got my phone into download mode odin \ kies wouldn't even recognize it , my pc won't even beeb or anything would pop up, my phone works great while it's on and odin recognize it (i can do the trans fare thing and open my phone's files on my pc) and when i go to device manager it shows me nothing about the phone no unknown devices either even though i unplug and plug my cable (while download mode ) the device manager won't refresh , I thought this problem is because the pc itself or the cable as your thinking right now BUT NO because i tried another galaxy s3 mini phone with the same cable and the same pc and guess what ? odin recognized it while on the download mode (it's stock though ) , i even tried it with different computers, cables , all usb ports and still doesn't work so the problem is in my phone and all of this happened after flashing my android and rooting it , i checked the hall internet for a fix someone on youtube said i should remove the battery , well i removed the battery while download mode , the pc catched it , installed some drivers and odin recognize it but when i try to flash the firmware (AP thing) it stops and says there is no partition , when re put my battery (while download mode) odin immediately say that the device is removed , even if the problem could be because the ROM i need odin to flash the stock firmware , my screen (while on the download mode) shows me that the current binary : custom , system status : custom , knock warranty void : 1 , AP SWREV : A3 ( Before and after the Unroot) So is there any way to fix my download mode (no data wiping preferred but no problem if i must wipe ) ? or even is there any way to flash my stock firmware without kies\ odin\ download mode ? (no data wipe preferred but it's ok ) so who's gonna help me please ? you would be my HERO :highfive:
Hi
Thanks for writing to us at XDA Assist. Please standby while we have your thread/question moved to the appropriate sub-forum for your device.
For future reference you can find your device sub-forum here (bookmark/subscribe this):
Samsung Galaxy S 4 i9500, i9505, i9505G, i9506
Within that section you will find a dedicated q&a sub-forum (this is where your thread is going to be moved to):
Galaxy S 4 Q&A, Help & Troubleshooting
Good luck!
ArefTh said:
Hello , so i have GT-I9500 galaxy s4 phone, I did root this phone before and flashed it once with odin without having any problems , now i have an ECHOE rom with official android 4.4.2 installed , so the android lollipop came out and i wanted to flash my phone again with odin i installed all the required drivers thousand times so it's not a driver problem , when i got my phone into download mode odin \ kies wouldn't even recognize it , my pc won't even beeb or anything would pop up, my phone works great while it's on and odin recognize it (i can do the trans fare thing and open my phone's files on my pc) and when i go to device manager it shows me nothing about the phone no unknown devices either even though i unplug and plug my cable (while download mode ) the device manager won't refresh , I thought this problem is because the pc itself or the cable as your thinking right now BUT NO because i tried another galaxy s3 mini phone with the same cable and the same pc and guess what ? odin recognized it while on the download mode (it's stock though ) , i even tried it with different computers, cables , all usb ports and still doesn't work so the problem is in my phone and all of this happened after flashing my android and rooting it , i checked the hall internet for a fix someone on youtube said i should remove the battery , well i removed the battery while download mode , the pc catched it , installed some drivers and odin recognize it but when i try to flash the firmware (AP thing) it stops and says there is no partition , when re put my battery (while download mode) odin immediately say that the device is removed , even if the problem could be because the ROM i need odin to flash the stock firmware , my screen (while on the download mode) shows me that the current binary : custom , system status : custom , knock warranty void : 1 , AP SWREV : A3 ( Before and after the Unroot) So is there any way to fix my download mode (no data wiping preferred but no problem if i must wipe ) ? or even is there any way to flash my stock firmware without kies\ odin\ download mode ? (no data wipe preferred but it's ok ) so who's gonna help me please ? you would be my HERO :highfive:
Click to expand...
Click to collapse
Hi mate
Odin troubleshooting: If Odin accidentally gives you "fail" try the following:
- Repeat procedure.
- Make sure that all actions of Kies are disabled from task manager.
- Change usb port.
- Try another usb cable (make sure it is the original).
- Try another Odin version.
- Uninstall and re-install driver.
- Use pit file.
- Try another computer.
check and read here
http://forum.xda-developers.com/showthread.php?t=2265477
Thx max 404 for your reply but I tried everything you said as I said in my Thread
Sent from my GT-I9500 using XDA Free mobile app

[Q] Overheating & Baterry Draining & Hang After about 1 minute

Sorry but i'm just a newbie here. Plz help me ... I'm having someproblem with my SS4 I9500 GSM only model. Just bought it a few days ago and yesterday after I root it with Kingroot everything still ok until I download the TWRP recovery on CHPlay. It show some kind of warning that could affect my SD but I ignore and have it done something to install the TWRP on my phone. After one time reboot my phone started to run real slow , super hot until hang itself and extremely battery draining ( about 25 - 30 % for one time boot till it hang and reboot ). I've tried to reinstall an Original Firmware but couldn't because I can't connect my phone with the PC everytime I tried to connect the cable my PC show the Code Err 23. Device not recognized. . I tried the factory reset but it still operated like that and there's no TWRP but the original recovery of android. Changed the cable , changed the PC , still nothing happened. Someone plz help !!!

Yotaphone 2 YD206 in Bootloop after update

Hello,
i have a problem with my 1 week old yotaphone and hope you guys can help me to solve.
Let me say, this is my first android device. After a long time using iphones i saw this 2-displays concept and wanted to give it a try.
But now my problem and the way to:
The phone was brand new and first of all i charged it for a wohle night.
After that i put in the sim-card and started the phone and walked through the start-procedure with WLAN, Googleaccount etc.
Then the phone told me about an update and i started it over WLAN.
The phone was downloading, rebooting and shows me a white window "updating x of 127(?) Apps".
Somewhere in the middel the phone rebooted again and now its in a bootloop.
What is possible with the phone right now.
I can start the phone wit the bootloop (powerred byAndroid, then restart)
I can use "Power + Vol-" to bring it into downloading mode
When i use "Power + Vol+" nothing happend.
When i use "Vol+ + Vol-" nothing happend.
The akku of the phone is empty now and it only works with usb or power unit connected.
In bootloop or downloading mode it is not charging.
What i tried.
What i try:
I read many topics with bricked / bootlooped yotphones and how to flash or cache whipping.
i connected the phone to my pc and used yotoflasher with many different firmwares.
I used fastboot:
- flashed the system.ing with differnet sizes.
- tried different custom recovery.img from different threads here and from other sites.
Even a complete new image, moddified RU img doesn`t help.
The phone stays in bootloop.
Yes, it`s a warranty case, but before i start to strech my nerves by handling with the dealer and shipping
this phone back to china i will try everything else and hope you can help me out of this situation.
Thanks a lot
easyxx said:
Hello,
i have a problem with my 1 week old yotaphone and hope you guys can help me to solve.
Let me say, this is my first android device. After a long time using iphones i saw this 2-displays concept and wanted to give it a try.
But now my problem and the way to:
The phone was brand new and first of all i charged it for a wohle night.
After that i put in the sim-card and started the phone and walked through the start-procedure with WLAN, Googleaccount etc.
Then the phone told me about an update and i started it over WLAN.
The phone was downloading, rebooting and shows me a white window "updating x of 127(?) Apps".
Somewhere in the middel the phone rebooted again and now its in a bootloop.
What is possible with the phone right now.
I can start the phone wit the bootloop (powerred byAndroid, then restart)
I can use "Power + Vol-" to bring it into downloading mode
When i use "Power + Vol+" nothing happend.
When i use "Vol+ + Vol-" nothing happend.
The akku of the phone is empty now and it only works with usb or power unit connected.
In bootloop or downloading mode it is not charging.
What i tried.
What i try:
I read many topics with bricked / bootlooped yotphones and how to flash or cache whipping.
i connected the phone to my pc and used yotoflasher with many different firmwares.
I used fastboot:
- flashed the system.ing with differnet sizes.
- tried different custom recovery.img from different threads here and from other sites.
Even a complete new image, moddified RU img doesn`t help.
The phone stays in bootloop.
Yes, it`s a warranty case, but before i start to strech my nerves by handling with the dealer and shipping
this phone back to china i will try everything else and hope you can help me out of this situation.
Thanks a lot
Click to expand...
Click to collapse
Mine too,stuck in bootloop. I also tried the fastboot and it said waiting device.
kophyo07 said:
Mine too,stuck in bootloop. I also tried the fastboot and it said waiting device.
Click to expand...
Click to collapse
If your phone displays Downloading... and fastboot keeps saying waiting for device then there is something wrong with the installed ADB driver. Check some of the posts in this forum like this one on how to fix this. http://forum.xda-developers.com/yotaphone-one/help/yotaphone-2-yd-206-china-flash-firmware-t3306797/post69311402#post69311402
Strange that you had an OTA (Over The Air update). You didn't do anything between the SIM/Google registration and OTA ?
Normally there are no OTAs allowed on yd206 phones bought from China/HK , where did you buy it ? Chinese retailers have their own firmware that they put on phones , for me , maybe you had bad firmware installed.
The warranty of your phone is voided if you flash yotaphones bought from China and HK .
When you use yotaflasher do you get error message or "waiting for device" ?
To flash the Yotaphone , it should be in developer mode , but you couldn't put it in this mode because it first did the OTA that started your bootloop. Android apps are updated like that ("installing x of 127") when it gets updated to lollipop. Normally the OTA should have worked OK. Did you allow enough time at the Yotaphone logo after the first reboot ? It stays on this logo for 5 minutes before starting. I made this mistake.
The OTA started just after you set up Google etc ?
If so, normal yotaflashing will never work, but at least you havent broken the warranty . The thing we need to know is what exactly happened when you tried to flash , what errors messages appeared ?
If you did not put the phone in developer mode, then you cannot easily flash the phone, so your best possibility is to return the phone. Normally you can contact the seller by chat or email . Some are very good in exchanging.
It IS possible to flash your phone using fastboot, but I would not personally attempt it and you would lose your warranty . You need rootkits, SDK toolkits, universal drivers and images. Google "bootloop without USB debugging".
When I flashed my yd206 , (after many attempts) I flashed my yd206 to yd201 Russian KitKat ROM first and then did an OTA to lollipop.

Killed my phone, still in warranty - or not ? please help !

Hi all !
I have a Samsung A8 (model SM-A800F) which was working great. I ran Kingo Root to try to install Youtube ad free. The next time I restarted it, it didn't load, and restarted in an endless loop to where "Samsung" logo appears (then restarted again). I booted into System Recovery and chose to reset to factory, but it didn't help. Then I tried flash it using Odin in Download mode. I installed the Windows drivers, downloaded the 6.0.1 firmware for Vietnam (where it was purchased), loaded the file into the AP field, and once verified clicked Start. The progress was frozen when reaching mid-way every time I tried, until it said "an error occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC software"...
I downloaded Smart Switch and installed in Windows, but the drivers were not able to install correctly, and failed on the component referring to the ID or something... while Modem driver was installed correctly and the phone appeared in Device Manager. Smart Switch didn't recognize my phone and said "unsupported device".
Now I cannot get the phone stay constantly ON, and the screen shuts down and loads in an endless loop, to the "Error occured" screen... When trying to boot to the ODIN Download page, it loads, I press UP for Continue, and then it again shuts down and loads to "Error Occured".
I tried to charge over night but it didn't help. It does the same thing when the phone is connected to the charger...
However it seems that by IMEI it is sill under warranty. I'm not sure if I voided it :/
Here's what the Download mode page says:
ODIN MODE
PRODUCT NAME: SM-A800F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FAP LOCK: ON
Secure Download: Enabled
KNOX WARRANTY VOID: 0
AP_SWREV: 1
Would appreciate any help, this phone is almost new but now it's dead :/
Your warranty is not voided. Your Knox E-Fuse still intact.
Also this is for S8 not A8 forums.
Paradoxxx said:
Your warranty is not voided. Your Knox E-Fuse still intact.
Also this is for S8 not A8 forums.
Click to expand...
Click to collapse
Thanks,
I just couldn't find any A8 forum, and thought there would be more people here who can help.
Would appreciate any help on this... thanks in advance
wurlitzer99 said:
Thanks,
I just couldn't find any A8 forum, and thought there would be more people here who can help.
Would appreciate any help on this... thanks in advance
Click to expand...
Click to collapse
No worries, your phone is not dead.
Try to find a firmware that correspond to the one you got :
http://updato.com/firmware-archive-select-model?exact=1&q=SM-A800F
and use ODIN : http://dl.sammobile.com/Odin3-v3.12.7.zip
You should be good to go.
EDIT : Also for that error occurred thing, try to be faster than it by starting odin flash before it appears.
Thanks,
The problem is that neither the error nor the Odin page would stay on for more than a few seconds. Once they appear, the screen would go dark after 5-10 seconds and then the "error" page would load again (after being darks for another 10 seconds or so). So I can never have ODIN or Smart Switch connecting to the device (the drivers won't connect in Windows)... making it impossible to upload any firmware.
wurlitzer99 said:
Thanks,
The problem is that neither the error nor the Odin page would stay on for more than a few seconds. Once they appear, the screen would go dark after 5-10 seconds and then the "error" page would load again (after being darks for another 10 seconds or so). So I can never have ODIN or Smart Switch connecting to the device (the drivers won't connect in Windows)... making it impossible to upload any firmware.
Click to expand...
Click to collapse
Could you take a picture of that error ? I've never heard/seen such thing
Hi, thanks for the help !
The error is this:
http://statics1.grupoandroid.com/up...1850.jpg.d2bb2a8b77e4fba5fc6467f3d1547886.jpg
I *think* I have some direction... here's what I did/found:
- I installed Smart Switch on my Mac, and chose "Reinstall Device Driver" from the menu. Then restarted the MAC
- I loaded Smart Switch, and Chose "Emergency Software Recovery and Initialization". Then chose the "Device Initialization" tab
- Added the model number "SM-A800F" and the device's serial number (which are physically written on my device).
Smart Switch determined the firmware version to be used for initialization, as:
PDA:QC3 / PHONEG3 / CSCH4(XXV)
- Smart Switch asked to:
1. Power the device down
2. Load recovery mode by pushing Power+Vol Down+Home, then connect the device to the MAC and choose "Continue" to start the initialization...
The problem/s:
My device won't turn on at all, if I do not connect it to either the charger or the MAC (which acts as a supply source?) - which makes me think the battery is fully drained ? i.e when not connected at all, it won't power on.
But when connected to either the charger or MAC, it would bootloop endlessly. i.e it will load the "error" page mentioned above, shut down itself, reload again, shut down and so on.
(I have to mention, that when I first noticed the bootloop, I reset everything to factory settings, cleared cache etc, and it still bootlooped on the Samsung logo).
If when it shuts down during the loop, I push Power+Vol Down+Home, it would boot to ODIN recovery page, where I can push UP for the Download page, but it will still reboot and will again load into the "error" page, which will again reboot endlessly. If I take the charger off the device, it powers off and won't load with any combination of button push.
I also cannot just make it shut down when the charger is connected, using any of the possible button combinations...
I wonder:
- Is there there's a problem which prevents the battery from being charged at all ?
What's strange is that the original problem which made me get into this whole issue, was that is was endlessly booting to the "samsung" logo - but when I booted to System Recovery or Download/ODIN modes, it stopped rebooting endlessly and stayed on... it was also showing the charging indication when powered off... the battery was charging well ever since.
- Why would it bootloop when connected to the charger ? is it possible that the bootloader went bad during my attept to install firmware using ODIN ? I know it always went through the boot.img and recovery.img successfully and only got stuck at about 50% when installing system.img...
I think the current bootloop problem began only once the battery ran out of power. But why wouldn't it charge at all now ??? It's supposed to still charge in this state, isn't it ?
wurlitzer99 said:
Hi, thanks for the help !
The error is this:
http://statics1.grupoandroid.com/up...1850.jpg.d2bb2a8b77e4fba5fc6467f3d1547886.jpg
I *think* I have some direction... here's what I did/found:
- I installed Smart Switch on my Mac, and chose "Reinstall Device Driver" from the menu. Then restarted the MAC
- I loaded Smart Switch, and Chose "Emergency Software Recovery and Initialization". Then chose the "Device Initialization" tab
- Added the model number "SM-A800F" and the device's serial number (which are physically written on my device).
Smart Switch determined the firmware version to be used for initialization, as:
PDA:QC3 / PHONEG3 / CSCH4(XXV)
- Smart Switch asked to:
1. Power the device down
2. Load recovery mode by pushing Power+Vol Down+Home, then connect the device to the MAC and choose "Continue" to start the initialization...
The problem/s:
My device won't turn on at all, if I do not connect it to either the charger or the MAC (which acts as a supply source?) - which makes me think the battery is fully drained ? i.e when not connected at all, it won't power on.
But when connected to either the charger or MAC, it would bootloop endlessly. i.e it will load the "error" page mentioned above, shut down itself, reload again, shut down and so on.
(I have to mention, that when I first noticed the bootloop, I reset everything to factory settings, cleared cache etc, and it still bootlooped on the Samsung logo).
If when it shuts down during the loop, I push Power+Vol Down+Home, it would boot to ODIN recovery page, where I can push UP for the Download page, but it will still reboot and will again load into the "error" page, which will again reboot endlessly. If I take the charger off the device, it powers off and won't load with any combination of button push.
I also cannot just make it shut down when the charger is connected, using any of the possible button combinations...
I wonder:
- Is there there's a problem which prevents the battery from being charged at all ?
What's strange is that the original problem which made me get into this whole issue, was that is was endlessly booting to the "samsung" logo - but when I booted to System Recovery or Download/ODIN modes, it stopped rebooting endlessly and stayed on... it was also showing the charging indication when powered off... the battery was charging well ever since.
- Why would it bootloop when connected to the charger ? is it possible that the bootloader went bad during my attept to install firmware using ODIN ? I know it always went through the boot.img and recovery.img successfully and only got stuck at about 50% when installing system.img...
I think the current bootloop problem began only once the battery ran out of power. But why wouldn't it charge at all now ??? It's supposed to still charge in this state, isn't it ?
Click to expand...
Click to collapse
Hmmm, the thing is, the battery charging process is actually held on some kind of "mini-boot" OS on Samsung I believe, where the phone boots into a certain state, with that said mini-os to display the battery charging info and this kind of things.
My guess is that you *might* have, or more likely your phone did corrupt the flash at some point for x or y reason.
What I'd do is :
Let the phone on a charger a whole night doing its bootlooping thing. And see from there if the battery would charge.
I'd try another computer with Odin just to be sure something is not triggering the reboot process at some point.
And if all the above fails, you still have the warranty, so beside time, you would not be losing any money..
I'm going to write a long post. But I believe it will help a lot of people having a similar problem.
Long story short - problem solved! but it took much of my nerves (and time).
I'll start with the "warranty". The so-called Samsung "warranty" which basically worths nothing!
Calling Samsung international service center, they "informed" me that I must contact Samsung Vietnam, where I bought the device, although I am not there anymore... Needless to say the local dealer in my country refused to take care of this situation, saying Samsung's warranty is regional based, rather than international... which means, only Samsung in the original country where the device was sold in, are responsible for the warranty (and therefore repair!). I had a chat with a Samsung Vietnam representative, who just kept saying "I'm sorry", and refused to let me sent the device out to them for repair! asking me to "bring it to them", although I noted him a few times that I bought it as a tourist and I am not in Vietnam anymore.... Thank you Samsung !! From now on every traveler in the world will know they basically have NO WARRANTY if they buy any Samsung device in a "foreign" country while traveling abroad!
Now for the solution:
I started by letting the device staying connected to the charger overnight, which didn't help. With the OS now installed, I realize that the battery was NOT CHARGED ! it was completely drained, although connected to a charger for long hours... So, know from now on that if your boot data is corrupted, it may cause the device NOT TO CHARGE THE BATTERY at all. Luckily, my desktop PC could use the device while connected to it although the battery was empty, until the problem was sorted out. I did get a crash on my MAC tough (Log said it was USB related), while using Smart Switch, so one option is that it could not supply enough power to the device to keep it keep working at all, or working correctly... So my suggestion is to use a desktop Windows PC in this case, which can potentially provide more power to a device with 0% battery power.
After scratching my head, and considering removing the front panel for replacing the battery (a very risky procedure) I decided to keep on investigating....
I followed a youtube video who suggests that you should install Smart Switch on a PC, choose "reinstall driver" from the menu, restart the PC, then use Emergency Recovery and Initialization, enter the phone model number in the search box (as appearing on the back of the device) , and once it recognizes the model, also to enter its serial number. Here's the video:
https://www.youtube.com/watch?v=1yXQUFrEWg4
This basically brings up a popup message saying Smart Switch detects a compatible firmware for this device, and is about to download and install it. It then asks the user to do the Power+Vol Up+Home push combination trick + pushing UP once the page is loaded in order to "Continue" and bring up the ODIN Download screen, which worked for me if did that as soon as the device shuts down (in the middle of the bootloop). As I couldn't make it load at all with no charger connected, I had it connected to the charger, and once I saw the Smart Switch message asking to do the push combination, I quickly connected it to the computer using another cable which was already connected to the PC USB port on its other end.
Somehow, I could at last make Smart Switch finally start downloading the firmware from the web, and the device again disconnected (bootlooped), but luckily Smart Switch didn't care about it disconnecting, and kept on downloading the firmware. At about 85% of the progress bar state, I could find the downloaded firmware on the temp folders, which are described in this thread:
http://forum.gsmhosting.com/vbb/f777/samsung-firmware-download-belongs-his-serial-number-2038404/
I had to make sure it wasn't still downloading, and watched the "last modified" state of the file to make sure they are not being downloaded anymore. CAUTION: although the AP was not downloading anymore, I know it was probably not good as ODIN couldn't verify it when I tested it. USE ONLY SMART SWITCH !
I quickly copied the folder to which the app extracted the BL and AP files it downloaded, and finally had an officialy bootloader (BL) image, which I could use in ODIN in order to reupload a correct, "official" bootloader to the device....
I hoped the device won't bootloop in the middle, but luckily ODIN was fast enough to send the image successfully, with a "PASSED" status, and the device booted with a nice "Samsung" logo directly to a System Recovery page!
What I exactly did, was loading ODIN, then loading ONLY the BL file into the BL field in ODIN, having it verifying it, and once verified I connected the device, and as soon as ODIN recognized it, pushed START. It managed to upload the image into the device in a few seconds! It seems then, that the bootloop was not caused by a bad battery, but as a result of a corrupt upload of an AP image through ODIN - or because I possibly was using an incorrect version when I tried to upload an AP files to the device on my first attempt to flash it.
Note that I did search for the correct, compatible AP file, by country and model (on Sammobile) but it didn't' work (stuck at 50% in ODIN) ! so I really suggest everyone TO ONLY USE SMART SWITCH if they want to be sure that the correct firmware is being used, and avoid similar situations...
I then deleted the temp files from the PC (the actual ones which were in the temp folder), reinstalled the drivers from inside Smart Switch (just in case), booted the device to Download mode (WHICH DIDN'T BOOTLOOP this time), let Windows installing the drivers (checked in Device Manager), then restarted the PC, and ran Smart Switch again. I repeated the procedure of loading Emergency and Initialization, entering the model and serial number, having it fully downloading the firmware (again) from the web, and installing the firmware into the device. This time it completed the process, and I finally had the device installing and booting into a fresh version 6.0.1 of Android!
Hope it helps!

My experience with my dead le pro 3 and need help

hi guys this is my first post about le pro 3 phone ( x720 )
Before more than one year i was install custom rom ( panaroid android rom ) and it is the best for me iam installed it via official TWRP and rooted it . but suddenly has loop and i cannot open anything just fastboot screen and when i charging it just i see red light , i tried to flash Qfile via flashone 2.0 tool ( i am installed all drivers needed ), flashed is successful but the problem loop is continue , after that iam going to local market ( in iraq ) they didn't have maintenance for leeco phone but i asked him to remove battery and return it , after doing so, he charged the phone, showed the charge rate and battery, became the battery percentage 55 % and I turned it on, but the problem continued , i flashed qfile again but nothing happened , I left the phone for months, then I gave it to a friend from China where we work together in the same company in Iraq, he took the phone to a maintenance center in China and they repaired it ( they find hardware problem and the replaced element or some thing like that ), My friend gave me the phone works with emui 5.8 and he buy spare battery and he told me that no need to replace battery as maintenance center say , after that just i install twrp and flash emui 6.0.0.30 and make root for it , the phone work fine for one month but also suddenly the system freeze and reboot loop , i tried to inter recovery but the screen black and white lines appeared as in previous problem .
what should i do dear friends
No body here ?

Categories

Resources