hello guys bit new here, i have tried rooting my device via ODIn coz vroot dint work and couldnt understand the reason since it was in CHINESE.
for now the device is stuck at "firmware problem need to upgrade it via kies mode" thogh i have tried doing the same through kies and kies 3 but wasnt succeful.
Please help as i am in urgent need of tablet.
the model no is SM T 231
Hi,
I will have your thread moved to your device section.
Good luck!
Moved to the correct forum.
Have you tried to flash a stock ROM from Odin in Download Mode? (not kies)
orangekid said:
Moved to the correct forum.
Have you tried to flash a stock ROM from Odin in Download Mode? (not kies)
Click to expand...
Click to collapse
nope i dont where to download the STOCK and even the procedure
I would DL stock KitKat with this link:
http://www.sammobile.com/firmwares/3/?download=33706
You might have to register to DL but sammobile is the only place I can find a decent DL for it.
Once it downloads unzip the file.
Download Odin 3.09 (you can find a free download everywhere).
Make sure your device is off, then hold vol dn and them power till it says to hit the button for download mode.
Once in download mode plug into your computer and if windows 7 or 8 let the drivers install fully.
If it does not find drivers then look for them manually.
Once you've got the drivers open Odin. It should be a green light on comm 1 or something like that showing a device is plugged into it.
Make sure ONLY F Reset Time and Auto Reboot are checked and nothing else.
Hit the AP button and find the tar file or md5 file you unzipped earlier.
Once it loads up hit start and hope for the best while it flashes.
Warning; read more about this before you try it. Once KitKat flashes do not try to downgrade, but read all about it.
I linked you to firmware for device SM-T231 so that had better be your device. Triple and quadruple check to make sure the file is the right one for your device...
Hope this helps.
Sent from my 1+bacon.
hello friends,
i tried to update my Note 4 (N910c) but it is now boot looping and i couldn't fix it. i tried to get into recovery but it is not. only odin mode. i flashed stock, cwm and twrp recoveries too. but non of them are working. but for the firmware i don't know the region of the phone, i bought it from ebay and it came from dubai. i really need help guys. i have tried all i know and non of it helped.
thanks
nemo0002253 said:
hello friends,
i tried to update my Note 4 (N910c) but it is now boot looping and i couldn't fix it. i tried to get into recovery but it is not. only odin mode. i flashed stock, cwm and twrp recoveries too. but non of them are working. but for the firmware i don't know the region of the phone, i bought it from ebay and it came from dubai. i really need help guys. i have tried all i know and non of it helped.
thanks
Click to expand...
Click to collapse
Download this all samsung recovery and flash via odin. Helped for me with bootloop.
https://www.dropbox.com/s/c3byn50jvboo7nv/All samsung recovery.tar?dl=0
Thank you @dewingerd for your reply.
I have tried the recovery and it is still stuck at the logo.
nemo0002253 said:
Thank you @dewingerd for your reply.
I have tried the recovery and it is still stuck at the logo.
Click to expand...
Click to collapse
Install the latest verson of kies on you computer.
Then in kies under "Tools" choose "firmware upgrade and initialisation".
Then give you model number "SM-N910?", next give serial number of the phone (you can find that on the sticker behind the battery in your phone).
Then you get a message that the "device can be initialised to its original setting"
Press ok and ok again. Then put your phone in download mode and connect to the computer and press "start upgrade".
Not working @dewingerd
Kies doesnt detect my phone. Bt drivers are installed correctly. It only opens in downloading mode
nemo0002253 said:
Not working @dewingerd
Kies doesnt detect my phone. Bt drivers are installed correctly. It only opens in downloading mode
Click to expand...
Click to collapse
Happened to me also 2 days ago.
Your mobile only can enter download mode ? but when u try to go to recovery or just power it , nothing happened , right ??
Well , you should do as @dewingerd said carefully do these steps :
Initially you need to upgrade kies to the latest version (mine is : 3.2.15072_2) or this will fail cuz it failed with me the first time.
1) take of your battery , and write down your Serial number .
2) open kies first.
3) open mobile in download mode then connect it . KIES WILL NOT RECOGNIZE THE MOBILE
4) Choose : Tools >> Firmware upgrade and initialisation
5) Kies will ask you about your mobile name , TYPE : SM-N910C , ALL CAPITAL LETTERS OR KIES WILL NOT RECOGNIZE IT
6) if you did not type the name correctly , you will get a message that kies does not know this name , so start again , type SM-N910C
7) then you will get another box asks for your serial number , enter it (Not case sensitive).
8) Kies then will inform you that it is going to prepare the phone and download the firmware for your device and that you have to connect it in download mode.
9) unplug your mobile , plug it again and click start.
10) Now the process is going to take a while depending on your internet connection (downloading about 2GB), do not unplug the phone and do not allow your laptop/PC to sleep.
11) cautions that I read before : you better not connect or disable any usb devices during the process.
12) suddenly , you will hear you mobile starting up again , congratulations
Q: What about my data , apps and stuff ?
A: All is gone except for those on your External card , sorry , nothing can be done for that (May be you should remove your SDcard first just in case).
Good Luck
APCOtech said:
Well , do as @dewingerd said
Initially you need to upgrade kies to the latest version (mine is : 3.2.15072_2) or this will fail cuz it failed with me the first time.
1) take of your battery , and write down your Serial number .
2) open kies first.
3) open mobile in download mode then connect it . KIES WILL NOT RECOGNIZE THE MOBILE
4) Choose : Tools >> Firmware upgrade and initialisation
5) Kies will ask you about your mobile name , TYPE : SM-N910C , ALL CAPITAL LETTERS OR KIES WILL NOT RECOGNIZE IT
6) if you did not type the name correctly , you will get a message that kies does not know this name , so start again , type SM-N910C
7) then you will get another box asks for your serial number , enter it (Not case sensitive).
8) Kies then will inform you that it is going to prepare the phone and download the firmware for your device and that you have to connect it in download mode.
9) unplug your mobile , plug it again and click start.
10) Now the process is going to take a while depending on your internet connection (downloading about 2GB), do not unplug the phone and do not allow your laptop/PC to sleep.
11) cautions that I read before : you better not connect or disable any usb devices during the process.
12) suddenly , you will hear you mobile starting up again , congratulations
Q: What about my data , apps and stuff ?
A: All is gone except for those on your External card , sorry , nothing can be done for that (May be you should remove your SDcard first just in case).
Good Luck
Click to expand...
Click to collapse
I have done all you have stated here and still end up on the Samsung boot logo, i have flash a stock firmware from sammobile and my note 4 still ends up on the Samsung boot animation logo
please help i don't know what else to do
Ify2gen2 said:
I have done all you have stated here and still end up on the Samsung boot logo, i have flash a stock firmware from sammobile and my note 4 still ends up on the Samsung boot animation logo
please help i don't know what else to do
Click to expand...
Click to collapse
Now , this is another case , as long as you can press power and the mobile starts up , showing the first logo , and next the animation , then this is no big problem .
just first tell me what is your note4 variant ? C F H ? can you root and install recovery ?
What happened to your mobile and resulted this ?
APCOtech said:
Now , this is another case , as long as you can press power and the mobile starts up , showing the first logo , and next the animation , then this is no big problem .
just first tell me what is your note4 variant ? C F H ? can you root and install recovery ?
What happened to your mobile and resulted this ?
Click to expand...
Click to collapse
thank for your quick reply, my variant is n910c ans yes i can still install recovery. I upgraded from 5.0.1 to 5.1.1 poland using odin and everything works well. I flashed Googy N4 kernel using TWRP 2.8.1.1 and everything still works well. My problem began when I made a backup of my 5.1.1 stock rom and flash infinity rom which end up in bootloop. So I tried restoring my backup but whenever it got to DATA RESTORING it keeps failing and flashing back the 5.1.1 poland stock firmware through odin keeps ending up on the SAMSUNG boot animation screen.
Ify2gen2 said:
thank for your quick reply, my variant is n910c ans yes i can still install recovery. I upgraded from 5.0.1 to 5.1.1 poland using odin and everything works well. I flashed Googy N4 kernel using TWRP 2.8.1.1 and everything still works well. My problem began when I made a backup of my 5.1.1 stock rom and flash infinity rom which end up in bootloop. So I tried restoring my backup but whenever it got to DATA RESTORING it keeps failing and flashing back the 5.1.1 poland stock firmware through odin keeps ending up on the SAMSUNG boot animation screen.
Click to expand...
Click to collapse
which version of googy kernel ?
Well whatever , TWRP 2.8.1.1 won't work with 5.1.1 bootloader , try TWRP 2.8.7.0
APCOtech said:
which version of googy kernel ?
Well whatever , TWRP 2.8.1.1 won't work with 5.1.1 bootloader , try TWRP 2.8.7.0
Click to expand...
Click to collapse
GoogyMax N4 v2.0. I have tried TWRP 2.8.7.0 but still the same.
After flashing stock firmware using odin, on my stock recovery i found this error
"E:failed to mount /efs (invalid argument)
dm-verity verification failed.......
need to check drk first......."
I have search through the internet but i can't get a clear picture of what it meant.
Does anyone has an idea of what it meant and how to resolve the error?
Ify2gen2 said:
GoogyMax N4 v2.0. I have tried TWRP 2.8.7.0 but still the same.
After flashing stock firmware using odin, on my stock recovery i found this error
"E:failed to mount /efs (invalid argument)
dm-verity verification failed.......
need to check drk first......."
I have search through the internet but i can't get a clear picture of what it meant.
Does anyone has an idea of what it meant and how to resolve the error?
Click to expand...
Click to collapse
Hi again ,
Looks like a locked phone and was unlocked in a wrong way or something like that.
read this thread , looks like the same problem.
in short , you need the 4 files firmware to be flashed via oden and as stated in page 2 there , you flash them without pit file.
You can find the 4-files firmware here but this is not 5.1.1 firmware , give it a try , if failed too , search for 5.1.1 4-files firmware.
here is another site but I do not really know if they are 4-files or the single file .
Good luck.
APCOtech said:
Hi again ,
Looks like a locked phone and was unlocked in a wrong way or something like that.
read this thread , looks like the same problem.
in short , you need the 4 files firmware to be flashed via oden and as stated in page 2 there , you flash them without pit file.
You can find the 4-files firmware here but this is not 5.1.1 firmware , give it a try , if failed too , search for 5.1.1 4-files firmware.
here is another site but I do not really know if they are 4-files or the single file .
Good luck.
Click to expand...
Click to collapse
thanks i will give a try and post my feedback
APCOtech said:
Hi again ,
Looks like a locked phone and was unlocked in a wrong way or something like that.
read this thread , looks like the same problem.
in short , you need the 4 files firmware to be flashed via oden and as stated in page 2 there , you flash them without pit file.
You can find the 4-files firmware here but this is not 5.1.1 firmware , give it a try , if failed too , search for 5.1.1 4-files firmware.
here is another site but I do not really know if they are 4-files or the single file .
Good luck.
Click to expand...
Click to collapse
All methods on the links you pasted didn't work, however i have been able to resolve it using this method from this link below
http://www.youtube.com/watch?v=HVOOwZs-kwQ
thanks for your support and help.
Ify2gen2 said:
All methods on the links you pasted didn't work, however i have been able to resolve it using this method from this link below
http://www.youtube.com/watch?v=HVOOwZs-kwQ
thanks for your support and help.
Click to expand...
Click to collapse
You are welcome , what matters is your phone is back
APCOtech said:
You are welcome , what matters is your phone is back
Click to expand...
Click to collapse
yes my phone is back but not fully back. I am having a bad IMEI, phone is not registering on network and i have mistakenly delected my EFS backup........my bad!
Can i get a working EFS backup of the same phone model (n910c) and restore it on my note 4 n910c? will it restore back my IMEI?
APCOtech said:
Well , you should do as @dewingerd said carefully do these steps :
Initially you need to upgrade kies to the latest version (mine is : 3.2.15072_2) or this will fail cuz it failed with me the first time.
1) take of your battery , and write down your Serial number .
2) open kies first.
3) open mobile in download mode then connect it . KIES WILL NOT RECOGNIZE THE MOBILE
4) Choose : Tools >> Firmware upgrade and initialisation
5) Kies will ask you about your mobile name , TYPE : SM-N910C , ALL CAPITAL LETTERS OR KIES WILL NOT RECOGNIZE IT
6) if you did not type the name correctly , you will get a message that kies does not know this name , so start again , type SM-N910C
7) then you will get another box asks for your serial number , enter it (Not case sensitive).
8) Kies then will inform you that it is going to prepare the phone and download the firmware for your device and that you have to connect it in download mode.
9) unplug your mobile , plug it again and click start.
10) Now the process is going to take a while depending on your internet connection (downloading about 2GB), do not unplug the phone and do not allow your laptop/PC to sleep.
11) cautions that I read before : you better not connect or disable any usb devices during the process.
12) suddenly , you will hear you mobile starting up again , congratulations
Q: What about my data , apps and stuff ?
A: All is gone except for those on your External card , sorry , nothing can be done for that (May be you should remove your SDcard first just in case).
Good Luck
Click to expand...
Click to collapse
Hi APCOtech im trying to solve mine too.. But my device not suppotred with kies3.. Any suggestion?? My device SM-N910S
Thanks man.
vzaen said:
Hi APCOtech im trying to solve mine too.. But my device not suppotred with kies3.. Any suggestion?? My device SM-N910S
Thanks man.
Click to expand...
Click to collapse
Try to download the appropriate firmware with Samfirm_reborn0.3.6.2 you'll find on Github. Unpack the .zip and start as admin.
Insert full device name and region and additionally check "binary nature" box.
It should download the latest! ROM multiple file format from Samsungs servers directly, at least it did for all my 7 devices (just in case) before I rooted them.
BUT I know that for N910V nothing is found and don't know about S model.
KIES I never used as I read it sometimes conflicts with Odin.
If files are downloaded flash with Odin adding the different files in their input fields. (selve explaining names)
hello people , I have a neo s3 and he stopped on the logo of Samsung ( why I was in a rom custom and clicked to format , so I also had a custon recovery then he stopped ) and is only trying to enter the recovery mode and still not working
already tried everything Odin and etc ..
he does not recognize in any PC with no driver
and also he just turn on with a charger conected
Can someone help me please!!!
PS: sorry for my bad english
how about download mode?
DerPuGNa said:
how about download mode?
Click to expand...
Click to collapse
yeah i can boot on download mode but he dosent recognize in any pc...
i think it is because the usb port is a little damaged so i replace it soon , but i cant do it at now , that is why i asking here...
JUST AL said:
yeah i can boot on download mode but he dosent recognize in any pc...
i think it is because the usb port is a little damaged so i replace it soon , but i cant do it at now , that is why i asking here...
Click to expand...
Click to collapse
Try connecting your phone when its in download and try with Odin, if it recognize your device than just flash stock rom.
JUST AL said:
yeah i can boot on download mode but he dosent recognize in any pc...
i think it is because the usb port is a little damaged so i replace it soon , but i cant do it at now , that is why i asking here...
Click to expand...
Click to collapse
Try a different version of Odin first. For me only 3.09 and upwards works.
Install Samsung kies 3 to make the phone recognizable by pc and try flashing stock firmware with odin 3.09
First of all, you should download the drivers and stock rom from Sammobile.
Found the drivers here: http://www.mediafire.com/download/k93a92c9rpyg4r5/Samsung-Usb-Driver-v1.5.55.0.exe
(not sure if they work, go and ahead install them and boot to download mode, then see, if odin recognizes it)
Latest Odin download: http://odindownload.com/
If the drivers work and your device is connected to the computer(also boot into download mode) and odin recognizes it:
1) Choose bootloader, then search for your downloaded firmware.
2) Head to the options tab and tick "Nand Erase All", "Phone EFS Clear" and "Phone Bootloader Update".
3) Then hit start and wait it to finish.
It should delete everything on your phone, restore it like it came out of the box.
If the drivers don't work let me know, I'll search for other working ones.
Hello!I need urgent help.I tried to install TWRP on my friend's phone using an app called Rashr.After it is installed it says that I need to reboot my device.So I did that.After rebooting it went straight to Download mode.It just stuck there.I have tried everything,from using odin (It won't detect my friend's phone),to using ADB (It also won't detect my friend's).I really has to fix his phone ASAP.Thanks!
(Note #1: Sorry for my terrible English )
(Note #2:I have used ADB before to fix my phone (Core Prime) when it was stuck in bootloop)
There's no way to get it working without Odin.
So try everything you can find online to make the PC detect the phone.
After that you should try flashing a bootloader (the same one that's already on the phone if possible). I'm almost certain that it will make the phone boot.
And then you can also proceed to flash the recovery with Odin.
And maybe this a silly question, but did you install the Samsung USB drivers?
Download the latest stock ROM from sammobile. Use the original Samsung USB cable and a USB 2.0 to flash the phone.
I like using Odin 3.07 as it has always been very stable for me: https://www.google.ca/url?sa=t&rct=...168421&usg=AFQjCNEdxqAS5QWImOPDJboTA_V3D5S9eA
Stock gt-i9500 firmware here: https://www.sammobile.com/firmwares/database/GT-I9500/
Get USB phone drivers from here: https://www.xda-developers.com/where-to-download-android-usb-drivers/
Wanted to find some deleted videos on my device and found some aplications that needed root to work ,
so I installed odin , downloaded some root and flash device , odin said "PASS" but my S7 were stuck at booting screen(just showing logo)
I restarted it ,tried everything from safe mode to factory reset , didn't boot , tried to flash one more time , it was stuck at connecting ,
so I made my phone brick , what can I do to fix this if I even can ?
I know im idiot I had 0 skill with this but I was saving for a long time to get this phone and this shall not be our last moment.
Model SM-G935F
I was using root from rootjunkysdl site, (Samsung_G935x_EX_Rooted-BOOT.zip)
I would realy appreciete any help since on reddit and android central my thread is ignored.
download samsung drivers to your computer, connect to smart switch click on more then emrgerency initialization and recovery follow instructions.
Im not trying to recover files , im trying to unbrick my phone
SmartSwitch has a phone firmware recovery option also.
Sent from my SM-G935F using Tapatalk
Go to sammobile and download the latest firmware for your phone. Hold volume down, home and power to boot into download. Connect phone to PC and use Odin (if Linux use Heimdall) to Flash the firmware. If you need more guidance you can find info on here or Google about flashing with Odin on our device.