Related
Hi there people I thought I'd share my experiences with you.
Recently I bought a 2400mAh battery (NEW) from eBay for a modest 10GBP (with another 11GBP P&P from Hong Kong), and I just want to say it's amazing.
My XDAIIi runs for so much longer now if I was to put a figure on it I'd say around 33-38% on full PDA functions. Which I find well worth it seen as the standard battery costs 19GBP from O2, the only thing is that the battery is bigger by around 5 millimetres, but it comes with its own backplate to allow it to fit snugly into the back of the handset.
I also bought from ebay the other following items:
Poly Carbonate Case (0.99GBP)
Signal Booster (0.99GBP)
The poly carbonate case, I find to be infinatly better than the standard leather case as it fits into your pocket easier (I dont wear the leather case on my belt), but although it lacks memory card holders (as you would get in the leather case) it more than makes up for it as it is way more aesthetically pleasing. A absolute bargain at 99p, but unfortunatly it only is made to take the standard battery and backplate.
The signal booster when I saw it I must say I was more than a little sceptical over whether it really does work but I thought I'd give it a try anyway. When it arrived I discovered that it was only a very small metal strip set in a sticker, and immeadiatly I thought I had been ripped off, but after fixing it to the inside of the battery backplate I did notice that it does actually make a differenc, however small, a difference is a difference and I definatly notice that calls are now more clearer and tend not to distort as much, but don't think that it will increase your signal enough to make calls in a tunnel lol.
Well for all in all around 30 quids worth on eBay (inc P&P) I'd say that was not too bad.
If anyone else knows of any good aftermarket products, especially a aluminium/metal or poly carbonate case that will accomidate the extra large backplate then please let me know.
----------------------------------------
O2 XdaIIi
Windows Mobile 2003 SE V4.21.1088
SanDisk 2GB Secure Digital Card
2400mAh Battery
BackPack Extension (With 4GB Compact Flash Card)
ROM VRSN: 1.11.00 WWE
RADIO VRSN: 1.00.00
PROTCL VRSN: 1337.39
ExtROM VRSN: 1.11.169 WWE
hi,
nice to hear great experiences from you
from what id do you bought the battery??? I really need new long term battery. Can you post some pics the case and signal booster at the phone.
Thanks........
A bit more expensive but this is the one I bought:
http://pdaden.com/shop/cart.php?target=product&action=view&product_id=17273&category_id=507
I bought one in the yahoo auction site, the battery work so well.
I even keep the phone on 24 hours, and run excel, surf the net with gprs, listern mp3, reading ebooks, updating stock profolio etc. and it still have 30% battery left after 4 days.
It is excellent, I never afraid of being run out of battery.
And, where did you buy this item: Poly Carbonate Case (0.99GBP)
Signal Booster (0.99GBP) ?
Thanks
told you
told you above . . . ebay lol
Ohhh, I am sorry I just made a search in ebay, and I didn't see it , please could you provide me the links...
Very pleasant...
Jerome
If I upgrade to a Xda IIi
So... I found it. But I am still one question... with the extended battery... what case do you use?
It´s possible to use a metal one?
Thanks.
I asking this because actually I have a Xda II and I want to know what things I could use from my xda II if I get a Xda IIi...
Thanks
XDAII
Well what I've found is that more or less everything for the XDA II works perfectly well with the XDA IIi, even programs etc, the battery is 5mm thicker than the standard and is supplied wth a back cover for it, its a sturdy plastic number, but unfortunatly not metal , i dont know if anyone out there has a aftermarket metal one, just know one thing . . . google doesnt have the answer :'(
as for the signal booster:
http://cgi.ebay.com/2-Cell-Phone-An...712626943QQcategoryZ20380QQrdZ1QQcmdZViewItem
hope this helps
4500mA battery does not work good. It simply does not gain 4500mA capacity... Works sligtly better than origional.
Going to make a charging device for this battery... Anyone has som ideas how to do that.
my first 2400mAh battery went dead after 6 months. It started with not possible to connect the phone function, then it will hardreset by itself. Then the battery drains away quickly.
I had take out the battery and tried to recharge it. But even I recharged it, the battery won't work anymore.
To be honest, I am scared to use third party battery. But it was so good to use, so that I bought a new 2400mAh battery eventually.
Good luck to all of us, It is good to have insurance as well.
Hi, fella forumers! I'm just wondering: how many of your Defy have lost (or still retain) its waterproofness up to now?
Mine has lost this quality about half a year ago. At first I noticed that there were vapours gathering inside the screen, which would go away if I opened the back lid for a while. But once the micro-USB port totally stoppoed functioning that I wasn't able to charge the battery, so I have to got it repaired. I was told that circuit board has water stains which caused the malfunctioning...
It's actually my seconf Defy, which was bought in Oct. 2011, after I've forgotten my first Defy in taxi... I was pretty satified with Defy at that moment and really value its waterproofness, so I didn't hesitate to buy a second one while there were already a lot of more advanced (but not waterproofing) smart phones on the market. Therefore, its waterproofness just lasted for roughly two years, which is much shorter than I had expected. I thought for at least five years it would be as new as just rolling out of the assembling line every time I washed it under tap water - but it turned out to be not the truth, sadly.
Well, I have to admit that I did wash my Defy regularly - in fact almost everyday, because - well, 'scientists' say that computer keyboards and mobile phones (previously it was traditional telephone) collect more germs, etc. that toilets. So eveytime I was back home, I just put it under the tap water, briefly let the currents to go through it. It shouldn't hurt, right?
Right now my Defy is completely 'hydrophobic'. I no longer dip it in water. I guess I will continue to use it for a year or two. Still, the fact is not up to my high expectation.
So, I would like to see if this is my own unfortune or a normal phenomenon. It's quite critial to know the result because if I do change my mobile phone, I would definitely choose a waterproofing one still. But now my confidence for such phones has been significantly weakened. If new phones repeat this fate after just a couple of years, I don't think it's really meaningful to pay more money for this not-long-lasting porperty.
Maybe the manufacturing technoligy has already advanced - phones nowadays are tougher than their predecessors?
Well, mine is about 8 months old (yes, I could've bought a newer device but thats a different story). In my time of using this phone, I would only say its water resistant and not exactly waterproof. Sometimes when I dip it in water (either to clean it after a busy day outdoors or when friends want to test it), i realize that some traces of tiny droplets do make it inside (looks like vapor sometimes). But it does not enter the battery area. This is probably due to the rubber lining. It still worries me as these traces of tiny droplets did somewhat enter.
I would suggest cleaning it with a wet cloth instead. Treat the waterproofing like it is an emergency feature...just in case
If and when you want to switch phones and still want waterproof, I'd say look at Sony. If you need removable battery, the Xperia ZR looks promising and if you don't mind not being able to access the battery, their other models are alright too. For me personally, battery life is important.
R u using any custom ROM?
My defy is waterproof to a great extent, but steam does enter, and sometimes condenses on the inside of the screen, and the camera lens. But under running water/rain no water enters. I once kept it in a bucket of water for some time, and a few drops made it to the edge, or maybe they came from the cover itself. So, it's good enough for me
Sent from my MB526 using Tapatalk 4
Mine lost 6 months back. the rubber round usb port got deteriorated and then came off. Now i cant cover usb port with the lid. cant find it selling anywhere either.
coldfusionhybrid said:
Well, mine is about 8 months old (yes, I could've bought a newer device but thats a different story). In my time of using this phone, I would only say its water resistant and not exactly waterproof. Sometimes when I dip it in water (either to clean it after a busy day outdoors or when friends want to test it), i realize that some traces of tiny droplets do make it inside (looks like vapor sometimes). But it does not enter the battery area. This is probably due to the rubber lining. It still worries me as these traces of tiny droplets did somewhat enter.
I would suggest cleaning it with a wet cloth instead. Treat the waterproofing like it is an emergency feature...just in case
If and when you want to switch phones and still want waterproof, I'd say look at Sony. If you need removable battery, the Xperia ZR looks promising and if you don't mind not being able to access the battery, their other models are alright too. For me personally, battery life is important.
R u using any custom ROM?
Click to expand...
Click to collapse
Yes, I've been flashing Quarx's roms.
I agree with you that Sony's Xpreia might be a good candidate, but it's only IP57 or IP55, right? So the grade is even lower than our Defy.
In fact it seems that nowadays at the market there are only two major series of waterproof smart phones: Sony's Xperia and Samsung's Galaxy S4 Active. Some sources mentioned that the latter is not that water-resistent. Of course there are other tougher phones which are heavily-armoured, but there are twice thicker and heavier - real bricks. Some have suggested that Lenovo's S750 is the next Defy, but as far as I can see, the technology used for waterproofness is the same of Defy's. Naturally I doubt if it will last longer than Defy.
IMHO, I think, at least in my case, the water enters into my Defy mainly through the back battery lid. It's made of a piece of platics that bends after year's using, so there comes the gap between the rubber band. Also, as vai0 has mentioned, the USB lid is vulnerable for the same reason. There's no conern for the headset jack, because it's totally made of rubber.
Anyway, I wish factories like Samsung and Lenovo will not follow Motorola and just make only one shot for good, but will keep designing new tough phones to the market.
By the way, I don't think phones like Moto X applied with nano-coating does not make too much sense, since the phone's still not watertight after all.
ymyzhifeng said:
Yes, I've been flashing Quarx's roms.
I agree with you that Sony's Xpreia might be a good candidate, but it's only IP57 or IP55, right? So the grade is even lower than our Defy.
In fact it seems that nowadays at the market there are only two major series of waterproof smart phones: Sony's Xperia and Samsung's Galaxy S4 Active. Some sources mentioned that the latter is not that water-resistent. Of course there are other tougher phones which are heavily-armoured, but there are twice thicker and heavier - real bricks. Some have suggested that Lenovo's S750 is the next Defy, but as far as I can see, the technology used for waterproofness is the same of Defy's. Naturally I doubt if it will last longer than Defy.
IMHO, I think, at least in my case, the water enters into my Defy mainly through the back battery lid. It's made of a piece of platics that bends after year's using, so there comes the gap between the rubber band. Also, as vai0 has mentioned, the USB lid is vulnerable for the same reason. There's no conern for the headset jack, because it's totally made of rubber.
Anyway, I wish factories like Samsung and Lenovo will not follow Motorola and just make only one shot for good, but will keep designing new tough phones to the market.
By the way, I don't think phones like Moto X applied with nano-coating does not make too much sense, since the phone's still not watertight after all.
Click to expand...
Click to collapse
The Sony may be ip55/57 but its good enough from what I've read. As for Samsung, I didn't suggest it because I don't like how they design things. Its appalling and I feel as if its insulting the consumer with their designs and material finish. Unfortunately, Samsung is one of the very few manufacturers that constantly deliver on 2 other important things (to me); removable battery and expandable storage. Still won't buy from them. But hey, thats just me. As for Lenovo, I have not tried it yet. Personally, I'm looking at the Xperia ZR at the moment if i choose to change (will still keep my Defy+ as secondary if i change ). A review in case you're interested too
Yeah, nano-coating isn't really water-proofing. I find it more like a water resistant protection. Sometimes there are phone models that become popular to the point that accessory makers produce cases that offer some sort of protection against water/dust. Thats something you can look at as well (with caution of course)
Defy is not water proof, it is water resistant. I did never wash it or put it into water and it is still in good condition (bought 06/2011), now with Android 4.4.
I'm replacing it with an XCover2 (IP67 certified) and also there the manual warns to immerse it in water although it has an underwater camera.
Hi everyone,
As said on tittle, I'm looking for a smart watch with the following requisites:
- Android complete 4.2 or higher
- Cell phone itself (gsm/wcdma)
- IP68?
I need it for swimming/surfing/similar, due to my work, I need to be contactable (calls/email) everytime, and sometimes I go swimming/surfing.
I bought an Imacwear M7, but the people said it's not ip67 and that it will die if I use it on the sea.
Does anyone tried this? Any other smartwatch? Any other options?
I'm a little bit lost, need your opinion and/or experience
Thanks a lot
none of the standalone (phone) watches will be fully water proof, because of microphone/speaker, if ever there will be one
some of them might claim water resistance but i wouldn't wear them not in shallow water, let alone the sea
the Sony Smartwatch 2 for example, claims to be ip57, but can't survive a shower. that watch doesn't even have a microphone or speaker
might be build quality related though
Swimming and surfing plus speaker and mic? That's 1 ATM (10m/30ft) rating at a minimum. No such creature exists, yet. It is possible to do, but companies would rather sell fashion smartwatches with laughable IP ratings instead.
Send it away and have it Liquipelled. http://www.liquipel.com/
SerialKilla said:
Send it away and have it Liquipelled. http://www.liquipel.com/
Click to expand...
Click to collapse
Don't waste your money. Tried that on three smartwatches, as well as a fourth project smartwatch of my own. It doesn't work. The treatment wears off when it comes in contact with pretty much anything. Oil deposits in the air from cooking, your skin, cloth, sand, dirt.
airtemisa said:
Hi everyone,
As said on tittle, I'm looking for a smart watch with the following requisites:
- Android complete 4.2 or higher
- Cell phone itself (gsm/wcdma)
- IP68?
I need it for swimming/surfing/similar, due to my work, I need to be contactable (calls/email) everytime, and sometimes I go swimming/surfing.
I bought an Imacwear M7, but the people said it's not ip67 and that it will die if I use it on the sea.
Does anyone tried this? Any other smartwatch? Any other options?
I'm a little bit lost, need your opinion and/or experience
Thanks a lot
Click to expand...
Click to collapse
I use Tempo Trainer Pro watch. U can find it here http://www.proswimwear.co.uk/ . It's includes a clip for dry land exercise. I am sure you will find it better then apple watch or Garmin.
I still havent found what im looking for...
Like I said before, no such creature exists. The best you can hope for is a regular smartwatch and then have somebody like me mod it to get it to a 1ATM (33ft) WR rating.
Hi lokifish Marz.... I´ve been thinking about doing that in my M7 smartwatch, but finally never tried it.
If finally doesnt appear that desired model, i will try to mod it for submersing
The M7 is like the Omate and is a serious pain to get IP67, much less anything better than that. About the only sort of easy way to get past a useless IP rating is fill the entire case with RTV silicone sealant, otherwise you are looking at a complete teardown and machine work.
I've been trying with liquid neoprene. It seals perfectly, very fluid, very good handling and also cheap!
Now I need to identify all the holes of the watch and work then properly.... It should work!
List of ingress points that need to be addressed to reach a minimum of 1 ATM water resistance needed for swimming/surfing;
Case back (requires complete redesign of seals or permanent sealing of back to case)
Case back screws and screw holes (requires complete redesign of seals or permanent sealing of screws into the case)
Buttons (requires complete redesign of button seals)
Camera (requires removal and filling of camera housing of replacement of housing glass)
Speaker (requires secondary sealing layer between speaker and outside)
Mic (requires secondary sealing layer between MIC and outside)
SIM Slot Door (requires sealing of screw holes and better gasket)
Charging contacts (requires the contact assembly in the case back be remounted and sealed using marine epoxy)
Display (requires the case be redesigned or pressure injecting sealant or marine epoxy from the backside)
Antenna ports (requires the bands be removed, the ports cleaned out. The bands then need remounting and a stiff silicone sealant be injected into the ports)
MIC and speaker secondary seal will negatively affect audio performance. This is however required as MIC and speaker damage will occur otherwise.
Display sealing issues are due to the lack of a large enough lip for the display to be mounted on to provide a proper seal
*Alternative approach (Untested)
Completely seal the display,PCB, SD Card, SIM Card, and battery in one solid block of silicone or some other water resistant material. Drawback is this seriously affects usability of the buttons, camera, MIC, and speaker. This also makes SIM, SDCard and battery swapping impossible.
(I've had over two years to think about this as well as attempt to get the TS and it's clones to pass a proper 24hr immersion test at 10m/33ft/1ATM. To date, I have not succeeded.)
Uffff.... so... you need to do a master.... its a marathon!
Thanks Lokifish... i think maybe i wont try...
i95,android 4.3,ip65,dial/answer phone call,you can know more from tinydeal.but i think Lokifish is right,no smartwatch can survive after a long time in the sea.
jack5847 said:
i think Lokifish is right,no smartwatch can survive after a long time in the sea.
Click to expand...
Click to collapse
Not exactly true. If he wanted a companion smartwatch it's not the hard at all. The issue is with him wanting to be able to do that with a standalone, or otherwise known as a watchphone. That requires far more engineering. The closest he could get to any out of the box solution would be the massive Timex Ironman ONE GPS+ and all that would give him is something similar to SMS texts and that's it. The other option is a decently made standalone then seal it completely with a SIM inside. He would lose the mic and speaker function but would at least be able to send/receive texts and know who's trying to call him. Not a pretty solution but it would work.
I think i´ve got it!
Doodgee S1.
I dont link to any shop, but you can find it very easy. I´m waiting for some reviews...
airtemisa said:
I think i´ve got it!
Doodgee S1.
I dont link to any shop, but you can find it very easy. I´m waiting for some reviews...
Click to expand...
Click to collapse
Again, ignore any IP67 rated. IP67 is 1m/3ft immersion with absolutely no moving allowed.
I agree with Lokifish - I don't think that animal exists. I just bought the No 1 A10 to evaluate it for workouts, including swimming...
http://www.gearbest.com/smart-watches/pp_286212.html
...and am looking at the D5 for "office wear". I have to admit that I'm more attracted to the idea of "one watch to rule them all" - but - I'm also looking at $56 for the A10 (I bought it when it was on sale) and $130 or so for the D5 (or similar) so for the total outlay it's a pretty compelling use case. I was an original Omate TrueSmart backer and was profoundly disappointed. After spending $360++ for a watch that *wasn't* waterproof I went the "dedicated exercise computer as a watch" route - in the form of the Polar V800. I had to wait another year or so for smart notifications to show up (for Android) and Polar *still* hasn't done some basic data integration with 3rd parties like MyFitnessPal and the like. That was another $500+ and it *still* doesn't collect accurate heart rate data in the water. So - there's that... and of course there's no *real* smartwatch functionality to speak of.
I had considered the Garmin fenix 3 - and the recent addition of on-device HRM is interesting - but I'm mostly a swimmer so I'm going to be using a chest-worn device if I go that route. But *if* I did that it would be another $600-800 plus the cost of their data-recording HRM strap. As it stands now - I'm done with dropping multiple C-notes onto one-off projects and half baked tech from "the big companies". I'm going to nickel-and-dime my way through and figure out a way to make it work with multiple devices (with a LOT of help from my friends at XDA). I have the Bragi Dash coming in (sometime in February at last count) which I'm hoping will give me accurate HRM/oximetry data while swimming - and I'll be working to merge that data with the stroke/SWOLF data I gather from the wrist-worn device.
Side note: One of the advantages of the dual-device theory just occurred to me - in that I *can* carry a portable battery-pack charger and have one on charge when the other is on my wrist. So there's some element of continuity/back-up, should something go sideways with one device or another. When my TrueSmart would go dead I felt pretty naked, when it worked and was relatively performant from a battery perspective.
Anyway, I think this class of device will take some time to sort out as the companies figure out what the market(s) will bear in terms of durability and cost.
Is it good or bad? Coz some people say it's bad as the battery isn't changeable. As when time passes by the battery gets damaged and when it completely does, your phone is broken already.. I want to buy A7 because it's so slim and I really like the design. But that is my concern. Any suggestions? TIA
Edit: I mean unlike removable batteries you can find class A batteries. But i think for A series, you need to buy the original one?
http://image.dhgate.com/0x0/f2/albu/g3/M01/B1/59/rBVaHFV34qSAFDxTAALoIPxAIxw464.jpg
nieohl said:
Is it good or bad? Coz some people say it's bad as the battery isn't changeable. As when time passes by the battery gets damaged and when it completely does, your phone is broken already.. I want to buy A7 because it's so slim and I really like the design. But that is my concern. Any suggestions? TIA
Edit: I mean unlike removable batteries you can find class A batteries. But i think for A series, you need to buy the original one?
http://image.dhgate.com/0x0/f2/albu/g3/M01/B1/59/rBVaHFV34qSAFDxTAALoIPxAIxw464.jpg
Click to expand...
Click to collapse
https://youtu.be/Kyn51KP3Hn0
My beloved XT1635-02 is dead.
I was removing and replacing the gel protective cover to hide my T pass behind it and noticed what looked like the center section of the display screen bulging out/separating from the case. Long story short, the plastic bag that encases the battery had swollen and pushed it out(battery out-gassing). Either that, or my efforts to remove the display cracked the display. Only the top inch of it works. I removed the battery and disposed of it properly expecting that it was about to explode. Just checked and cheapest display is about $33 and battery is about $10. I had ordered a used Moto X4 yesterday ($100), but was hoping to make this into a spare, but at that price it gets trashed. Life goes on...
Running on my old Moto G3 - ALWAYS have a spare!!!
Note, I had almost never used the fast-charge charger.
:crying:
:laugh:
I think this is a known issue with the moto z play. I had to get my battery replaced after it "puffed" and pushed the screen out of the body. Had to fight tooth and nail with Motorola to cover it under warranty. Now 12 months later from the replacement being installed I can see the replacement battery is starting to puff as well so I am currently looking to replace it with probably a Huawei p30pro or a Xiaomi note 10 pro...
My friend who also bought this phone at a different time and a different store had his first battery puff, had it replaced and the second battery puffed as well. He's now onto his third battery.
I know it's a small sample size of two but still I've never had a phone battery do that before so it seems it may be an issue with this phones battery model
Sent from my XT1635-02 using Tapatalk
Sample size of 3... thanks for sharing. bad batch of batteries? - probably, if it was happening that fast for you and your friend. I didn't see any deformation of the battery itself when I got it out, but if it's outgassing I wouldn't want to chance it (by pricking the bag with a pin).
Lithium batteries seem to be constantly in the news... Not much to be done, though - everything depends on them these days...
Most any phone out there is good, though I seem to stick with Moto because way back there I got a sammy and it had terrible antennas/reception and moto had great. so I stick with them, for now at least. Did have a huawei way back there and it was fine. Never had a xiaomi but I don't think they work in US with ATT. politics!
I have no intention of modifying the new phone, at least at the moment - too much of a time sink!
how long did you use mzp. I'm in the mzp threads for nearly 2,5 years and you where always there too. So your mzp should have neatly same age as mine
I ordered mine, used, on Jan 11, 2018 so I've had it a month short of 2 years. Hard to say how long it was used before that. sticker on mobo says 2016-09-14 so it's max 3 years old. It's hard to compare stuff that's that old to even older phones because technology continually changes and the insulating layer between the layers inside the battery keeps getting thinner to yield thinner phones. I guess battery problems are just payback for getting thinner phones!
I tryed to replace battery / order a kit from iFixIt but must goten wrong tools or the worst quality of screwhead so now they are rounded.
What tool you used to open battery holder?
have you tryd to unplug 2 cables than hold screen and unplug it again?
i thought a broken my screen when it dident respond and all war of ants pixels then i got cable stuck on right place and it start working again
Hammarn84 said:
I tryed to replace battery / order a kit from iFixIt but must goten wrong tools or the worst quality of screwhead so now they are rounded.
What tool you used to open battery holder?
have you tryd to unplug 2 cables than hold screen and unplug it again?
i thought a broken my screen when it dident respond and all war of ants pixels then i got cable stuck on right place and it start working again
Click to expand...
Click to collapse
There is a bracket covering the battery connection that has 6 torx-4 screws. I got my tool kit a long time ago on ebay - probably 3 or 4 phones ago so figure a year or 2 per phone. It's 10 years old.
There are 2 ribbon cables holding the display on. I unplugged both of them, but I wouldn't have known how without finding a video on youtube of a MZP teardown that showed me how.
I will not get a new display for it as they cost $35 plus and a new(to me) X4 cost me $100. My old G3 still works for a spare so I dont need the mzp for a spare.
KrisM22 said:
There is a bracket covering the battery connection that has 6 torx-4 screws. I got my tool kit a long time ago on ebay - probably 3 or 4 phones ago so figure a year or 2 per phone. It's 10 years old.
There are 2 ribbon cables holding the display on. I unplugged both of them, but I wouldn't have known how without finding a video on youtube of a MZP teardown that showed me how.
I will not get a new display for it as they cost $35 plus and a new(to me) X4 cost me $100. My old G3 still works for a spare so I dont need the mzp for a spare.
Click to expand...
Click to collapse
you sure it was Torx-4? it would explain why i broke screwhead but then iFixIt sended me wrong tools
I had to buy new phone battery so bad.
if you have tight budged as me i bought xiaomi redmi note 8 pro and got it few days ago and fot that prize iam really really happy for that prize
Hammarn84 said:
you sure it was Torx-4? it would explain why i broke screwhead but then iFixIt sended me wrong tools
I had to buy new phone battery so bad.
if you have tight budged as me i bought xiaomi redmi note 8 pro and got it few days ago and fot that prize iam really really happy for that prize
Click to expand...
Click to collapse
Yes, was torx 4. Those screws were in really tight so you might have just broken one off.
Phone repair is often a dangerous and costly game.
Often it is better and cheaper to move forward rather than trying to fix the old.
Talos77 said:
I am currently looking to replace it with probably a Huawei p30pro or a Xiaomi note 10 pro...
Sent from my XT1635-02 using Tapatalk
Click to expand...
Click to collapse
I would highly recommend against buying either brand of phone. Both companies are Chinese owned, and have been proven to have backdoors.
Anyone that values their privacy should NEVER own a Huawei device.
On top of that, they removed the ability to use custom launchers on the mate 10, right before I sold mine.
xT29c said:
I would highly recommend against buying either brand of phone. Both companies are Chinese owned, and have been proven to have backdoors.
Anyone that values their privacy should NEVER own a Huawei device.
On top of that, they removed the ability to use custom launchers on the mate 10, right before I sold mine.
Click to expand...
Click to collapse
Realistically I see no more issue with the Chinese having my data than American companies like Google and Facebook. They are just as untrustworthy as the Chinese.
Each to their own though I guess.
Sent from my XT1635-02 using Tapatalk
@Talos77 you are probably right. Besides, everything these days is made in China! Certainly my Motos are. But I never do anything on a phone I wouldn't want published on a billboard. That said I am now going to unsub this thread and leave you on your own!
Have fun!!!