Hi xda members!
i am a noOb when it comes to anything android. Just switched from iOS. I did however manage to softbrick my s4 when attempting to flash the latest pacman rom for jfltecan. Nevertheless in the end I managed to restore to stock TW via Kies and factory reset. Guess what i'm asking is that is there a stable (daily driver stable) version of parandroid for Samsung Galaxy S4 SGH-I337M on Fido(rogers) in canada? I'm really looking forward to using the Halo))) function on the rom, i just love pie control. I was running CM 10.1 and it's a fantastic rom, but i'm looking for more features and no bloat ware. Thanks!
Another Question: Can i run i9505 roms on my i337m phone? from what i've read, it's definitely possible, after all the i337/m are the same as the i9505. :laugh:
Both pacman and paranoids nightlies right now are 4.3. A few people are having boot issues on the 4.3 for pacman and had to switch from TWRP to another recovery to get the nightlies working
seamonkey789 said:
Both pacman and paranoids nightlies right now are 4.3. A few people are having boot issues on the 4.3 for pacman and had to switch from TWRP to another recovery to get the nightlies working
Click to expand...
Click to collapse
What's wrong with TWRT? Should I switch to CWM? Can someone confirm that parandriod is working on i337m?
Okey so I can confirm that PA 3.96 jfltecan is working 95% of the time. So far so good... I did have to pull out the battery and hard restart a couple of times. I got stuck on blank welcome freaked me out. But just give it give minutes. I'm running CWM latest recovery. Tried TRW? (Sry forgot the spelling) got stuck on bootloop. BTW pacman and PA 4.3 didn't work for i337m as of today.
Sent from my SGH-I337M using XDA Premium 4 mobile app
Related
Hi guys, I just recently(like 3 days ago) got a Nexus 4. My cousin had installed the stock 4.4.2 Kitkat, and then I flashed Purity Rom(Latest 4.4.2).
After a while I read about SlimBean(4.3) and decided to download and try. I flashed it with CWM and all was well, except Wifi wasn't turning on and the Dialer app took about 10 seconds to select a number, also I couldn't pickup a call because it was really, really laggy. So now I'm back on Purity and currently downloading Paranoid Android 3.99RC2. Should there be any steps/methods I should follow? I am on .98 Baseband, thanks!
iG0tB00ts said:
Hi guys, I just recently(like 3 days ago) got a Nexus 4. My cousin had installed the stock 4.4.2 Kitkat, and then I flashed Purity Rom(Latest 4.2.2).
After a while I read about SlimBean(4.3) and decided to download and try. I flashed it with CWM and all was well, except Wifi wasn't turning on and the Dialer app took about 10 seconds to select a number, also I couldn't pickup a call because it was really, really laggy. So now I'm back on Purity and currently downloading Paranoid Android 3.99RC2. Should there be any steps/methods I should follow? I am on .98 Baseband, thanks!
Click to expand...
Click to collapse
A full wipe is a must! Other than that you should be good to go! In my opinion, I would stick with Purity for now. I heard that Pa 4 is right around the corner tho.
Sent from my Nexus 7 (2013)
Don't recommend going from purity to slim beam in my experience purity is better
Sent from my Nexus 4 using xda premium
Did you try flashing a different radio?
iG0tB00ts said:
Hi guys, I just recently(like 3 days ago) got a Nexus 4. My cousin had installed the stock 4.4.2 Kitkat, and then I flashed Purity Rom(Latest 4.4.2).
After a while I read about SlimBean(4.3) and decided to download and try. I flashed it with CWM and all was well, except Wifi wasn't turning on and the Dialer app took about 10 seconds to select a number, also I couldn't pickup a call because it was really, really laggy. So now I'm back on Purity and currently downloading Paranoid Android 3.99RC2. Should there be any steps/methods I should follow? I am on .98 Baseband, thanks!
Click to expand...
Click to collapse
If you downgrade to Jellybean 4.3 then you also need to flash 0.84 radio because KitKat radios (0.97 and 0.98) will have wifi issues with JB ROM's.
taodan said:
If you downgrade to Jellybean 4.3 then you also need to flash 0.84 radio because KitKat radios (0.97 and 0.98) will have wifi issues with JB ROM's.
Click to expand...
Click to collapse
The radio didn't cross my mind.
Thanks!
Sent from my Nexus 7 (2013)
Flashed the 0.84
Yeah thanks for that, flashed the .84 and all is well. Came back to RastaKat though
As title, looking for the 4.3 touchwiz based rom's that work with the old bootloader.
Almost all custom roms you can flash from recovery won't update your bootloader. I recommend omega.
Read OP of any rom and you will sure notice that the bootloader will remain untouched after flashing.
dkreventon said:
Almost all custom roms you can flash from recovery won't update your bootloader. I recommend omega.
Read OP of any rom and you will sure notice that the bootloader will remain untouched after flashing.
Click to expand...
Click to collapse
There will be no issues like lack of sound, wifi etc?
Been using GE roms since the new bootloader was introduced but I have read posts from users having problems flashing new firmware with old bootloader, or is that just for the official roms?
As long as you have the latest modem (MJ5) there won't be any issues.
http://forum.xda-developers.com/showpost.php?p=48972299&postcount=18311 - Check the installation instructions.
dkreventon said:
As long as you have the latest modem (MJ5) there won't be any issues.
http://forum.xda-developers.com/showpost.php?p=48972299&postcount=18311 - Check the installation instructions.
Click to expand...
Click to collapse
I'm already using that modem so might just give it a try.
Thanks for the help.
Be sure to have the latest philz touch and you're good to go!
Flashed Omega V19, all working.
Definitely not as smooth as the GE roms but it 's not bad, also it's nice to have the Samsung Camera back again.
Also give echoe rom ago, I'm on old bootloader and mk9 modem, working much better than 4.2.2 stock
Sent from my GT-I9505 using xda app-developers app
ranger4740 said:
Also give echoe rom ago, I'm on old bootloader and mk9 modem, working much better than 4.2.2 stock
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Thanks, might give that a try as Omega just started rebooting randomly..
Will try another kernel, if that doesn't fix it then ill try echoe.
All custom roms since 4.3 gave me random reboots once every couple of days.
I'm currently running omega v19 and the uptime is 48h.
Well I got Omega stable with KT kernel, but found the lag a bit annoying so tried echoe rom anyway.
Sadly the lag is much the same, I guess it's a feature of touchwiz and nothing can be done about it.
Why havent Samsung fixed this? it's almost the same as the original roms that phone shipped with.
Hello all...
My boyfriend has the S4 for AT&T and loves the setup I have on my S3 with CM11 nightlies. Just curious as to how stable they are for the S4. I'm the Android nerd in the relationship and I don't want him to have any issues, since we don't live together.. yet
Or should I put another KK rom I saw over in the development section? Is CM10/JB more stable? How's the battery drain? I want to improve his phone, not give him problems LOL. He's completely stock right now.
I already know how to root and all that, I don't need instructions just advice for the best AOSP ROM/Kernel out there for this device.
Thanks in advance!
Depends on which firmware your boyfriend's phone has. Unless he is on the older firmware 4.2 MDL, there is no way to flash any AOSP rom, custom kernel, or even custom recoveries except Safestrap recovery.
With safestrap recovery, you can only flash certain touchwiz roms.
I'll have to check it out when I see him in a cpl days
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Personally...I prefer custom tw roms on this phone..tw is actually better looking and more polished...and alot more features...check out Graviton 1.7
AT&T Samsung Galaxy SIV
Graviton Rom 1.7
Ktoonsez 01/13/2014 Kernel
I spent a few days messing around with a CM11 1/10 nightly, 1/12 nightly, and the M2 snapshot.
I was really quite impressed with just how smooth everything looked and felt.
Definitely a step up from CM 10.2 and 4.3-based Carbon builds.
I had best results with the 1/12 nightly and the M2 snapshot.
I was experiencing odd reboots and glitches with the 1/10 nightly.
Mine is a pre-MF3 phone, obviously.
rule of thumb with nightlies is that they are not always an indication of an official release. You could get a bad nightly but the nightly before was fine. So far they are fine and nightlies are generally for flash-oholics
Yep. If you're deadset on a relatively hands-free CM11, I think the M2 snapshot is probably the best bet.
Kaze105 said:
Depends on which firmware your boyfriend's phone has. Unless he is on the older firmware 4.2 MDL, there is no way to flash any AOSP rom, custom kernel, or even custom recoveries except Safestrap recovery.
With safestrap recovery, you can only flash certain touchwiz roms.
Click to expand...
Click to collapse
OK so I took a screenshot of his system info and sent it to myself LOL
Baseband I337UCUAMDL
Kernel 3.4.0-453947 [email protected] #1
Build Number JDQ39.I337UCUAMDL
Is this the firmware you were referring to? I asked him if he did any system updates and he said he has not.
rachelm920 said:
OK so I took a screenshot of his system info and sent it to myself LOL
Baseband I337UCUAMDL
Kernel 3.4.0-453947 [email protected] #1
Build Number JDQ39.I337UCUAMDL
Is this the firmware you were referring to? I asked him if he did any system updates and he said he has not.
Click to expand...
Click to collapse
Yes, that's the right firmware. You can go ahead and use CASUAL, and then flash whatever you like for him.
I have been using the CM11 rom from Temasek until I decided to have a go at the Omega Rom. After installing through recovery, my note cannot get out of the Samsung Logo. It just refused to start. Tried installing latest stock rom through odin, same issue. Saw three lines of messages on the top left hand corner and the Samsung logo and that's it. Can only get it working if I revert back to Temasek's rom.
Help anyone...
redviper52 said:
I have been using the CM11 rom from Temasek until I decided to have a go at the Omega Rom. After installing through recovery, my note cannot get out of the Samsung Logo. It just refused to start. Tried installing latest stock rom through odin, same issue. Saw three lines of messages on the top left hand corner and the Samsung logo and that's it. Can only get it working if I revert back to Temasek's rom.
Help anyone...
Click to expand...
Click to collapse
which versions of omega and stock rom did you flash ? i read you said the newest, just asking to be sure.
if its the newest omega rom, you must flash 4.4.2 stock rom first.
when you upgrade to 4.4.2, you can no more use cm11 and you cant go back to any 4.3 based rom.
A.N.Droid said:
which versions of omega and stock rom did you flash ? i read you said the newest, just asking to be sure.
if its the newest omega rom, you must flash 4.4.2 stock rom first.
when you upgrade to 4.4.2, you can no more use cm11 and you cant go back to any 4.3 based rom.
Click to expand...
Click to collapse
I tried the 7.1 Omega Rom and then the 4.4.2 version of the stock rom.
You have to flash the stock 4.4.2 via Odin. Is that what you did?
Sent from my SM-N9005 using XDA Premium 4 mobile app
lyall29 said:
You have to flash the stock 4.4.2 via Odin. Is that what you did?
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes I did.
Try to boot into recovery after flashing the stock 4.4.2 and factory reset. Maybe that will work.
Sent from my SM-N9005 using XDA Premium 4 mobile app
Flash stock 4.3 with odin, then 4.4.2 stock with odin. Then install recovery, and Omega after.
redviper52 said:
Can only get it working if I revert back to Temasek's rom.
Help anyone...
Click to expand...
Click to collapse
that shouldnt be possible if you done everything right.
as soon as you are on the new bootloader that you get when you flash 4.4.2, you can definatley not revert to temasek, it wont boot.
i think you are still on the old bootloader and that is why your kitkat based roms dont boot.
A.N.Droid said:
that shouldnt be possible if you done everything right.
as soon as you are on the new bootloader that you get when you flash 4.4.2, you can definatley not revert to temasek, it wont boot.
i think you are still on the old bootloader and that is why your kitkat based roms dont boot.
Click to expand...
Click to collapse
Thanks all... Its done. Went back to stock rom 4.3, then the 4.4.2, then followed by the usual rooting process for 4.4.2. Phone's working fine now. Doing update to Omega 7.2 as I am writing now... Thanks again all...
Mafle93 said:
Flash stock 4.3 with odin, then 4.4.2 stock with odin. Then install recovery, and Omega after.
Click to expand...
Click to collapse
That did it... Thanks
Hi I have an unrooted Samsung Galaxy S4 I9505 on Cyanogenmod M11, Was on UK VOD stock but moved to Cyanogenmod which is still on 4.4.4 KitKat but I'm a bit worried about future development of CGM. I read about tussles with other companies and big aspirations for M12 but the regular updates I've been enjoying have died out. not even a lollipop stable yet, I'm beginning to lose hope.
I know I shouldn't be so skeptical but I want to explore other roots (no pun intended).
Currently which rom would provide me with a stable lollipop with regular OTA updates for future proofing my phone?
Thanks v much
Alternatively I guess I could go back to stock to get lollipop but haven't done it in a while Im guessing I just flash a stock image via odin
Those tensions don't really affect Cyanogenmod, though I understand your concern. However, the biggest issue you're going to have is that most - if not all - custom ROMs are built using Cyanogenmod as a base. Realistically, the only alternative available I can think of without going to Touchwiz is Danvdh/Kryten's GPE ROM. Going back to Touchwiz is a dead end. Samsung has stated that Android 5.x is the end of the line for the S4, meaning there will be no Android M unless using a custom ROM.
Thanks very much for the excellent advice. I will give Danvdh/Kryten's GPE ROM a go and see how I go. I'm going to post the link to the ROM thread if anyone is following the same route as me: http://forum.xda-developers.com/showthread.php?t=2557353
EDIT: I'm going to try http://forum.xda-developers.com/galaxy-s4/i9505-orig-develop/rom-cyanogenmod-12-t2943934 first as its CM 12 lollipop which is what I was looking for really but will try GPE if i dont like that rom
Another question... sorry: i currently have CWM on my phone but the CM rom says to use TWRP with F2FS does cwm have this or do i need to remove CWM and install TWRP?
Trevsweb said:
Thanks very much for the excellent advice. I will give Danvdh/Kryten's GPE ROM a go and see how I go. I'm going to post the link to the ROM thread if anyone is following the same route as me: http://forum.xda-developers.com/showthread.php?t=2557353
EDIT: I'm going to try http://forum.xda-developers.com/galaxy-s4/i9505-orig-develop/rom-cyanogenmod-12-t2943934 first as its CM 12 lollipop which is what I was looking for really but will try GPE if i dont like that rom
Another question... sorry: i currently have CWM on my phone but the CM rom says to use TWRP with F2FS does cwm have this or do i need to remove CWM and install TWRP?
Click to expand...
Click to collapse
Don't use that version of CM. It's not what you want because it's not updated anymore.
Use this version:
http://forum.xda-developers.com/gal...lop/exclusive-antaresone-alucard24-s-t3066696
or the Official nightlies.
I used the older one but realised too late (
got stuck with no gapps and the bloody thing wouldnt boot into recovery cwm or twrp :/ never had that before. so having to do stock flash It's failed twice LOL
EDIT: got it stocked well thats something at least. anyway tomorrow I'll try again and get TWRP on there properly, it was weird because cyanogemod had installed CWM on there before i couldnt get rid of it :/ so i ended up with no recovery manager doh! Thanks for the link Lenny
Lennyz1988 said:
Don't use that version of CM. It's not what you want because it's not updated anymore.
Use this version:
http://forum.xda-developers.com/gal...lop/exclusive-antaresone-alucard24-s-t3066696
or the Official nightlies.
Click to expand...
Click to collapse