Database Users

[Q] Canadian MDJ firmware vs MDL ROM

I currently have a brand new Canadian S4 with the MDJ firmware/baseband version.
Most of the roms are MDL based.
Do i have to change the base firmware/baseband to MDL before flashing and MDL rom ?
My goad is to install CleanRom wich is MDL based.
Thanks for the guidance.
Xetalx

Xetalx said:
I currently have a brand new Canadian S4 with the MDJ firmware/baseband version.
Most of the roms are MDL based.
Do i have to change the base firmware/baseband to MDL before flashing and MDL rom ?
My goad is to install CleanRom wich is MDL based.
Thanks for the guidance.
Xetalx
Click to expand...
Click to collapse
You can just flash the ROM. Just make a Nandroid backup first. Some ROM's come with a custom kernel and you may need to flash a Canadian kernel directly after flashing the ROM.

blyndfyre said:
You can just flash the ROM. Just make a Nandroid backup first. Some ROM's come with a custom kernel and you may need to flash a Canadian kernel directly after flashing the ROM.
Click to expand...
Click to collapse
I did get the original Kernel file for my cell provider. It is a TAR file with boot.img into it.
What is the easyest way to apply it after flashing the Rom in TWRP ?
Thanks
Xetalx

TARs are flashed with Odin or Mobile Odin.

Xetalx said:
I did get the original Kernel file for my cell provider. It is a TAR file with boot.img into it.
What is the easyest way to apply it after flashing the Rom in TWRP ?
Thanks
Xetalx
Click to expand...
Click to collapse
If you are flashing the STOCK firmware for your specific carrier it will include the STOCK kernel.
If you are using a custom ROM like Mint Jelly or something, I'd say flash Adam kernel after flashing the ROM. You won't want to flash a STOCK kernel with a custom ROM.

Did you end up updating to MDL?
I also have the MDJ kernel and I installed CleanRom, I now cannot get wifi and TWRP will not boot in recovery mode. I thought it would be easier just to update to MDL to get wifi but mobile Odin did not work.
Thank you

travisobvs said:
Did you end up updating to MDL?
I also have the MDJ kernel and I installed CleanRom, I now cannot get wifi and TWRP will not boot in recovery mode. I thought it would be easier just to update to MDL to get wifi but mobile Odin did not work.
Thank you
Click to expand...
Click to collapse
Regarding wifi on CleanROM, did you check post #2 here?

bo8 said:
Regarding wifi on CleanROM, did you check post #2 here?
Click to expand...
Click to collapse
No I did not,
Truthfully I am a pretty big Noob to all of this and was afraid of changing my kernel to MF3 from MDJ. I really didn't know how that would affect my phone / carrier situation here in Canada. The main problem was that I could not get the phone into recovery mode. Turns out I just needed to re-root the phone. So when I got the phone to actually go into recovery I jumped at the CM Rom. When I find a forum that helps me understand what updating my Kernel does to my phone I will try to update Kernel and go back to CleanRom. I kind of miss multiwindow.... maybe a little bit of Touchwiz...
Thanks for the reply!
EDIT : I also found this : http://www.scottsroms.com/downloads.php?do=file&id=421 which is a version of CleanROM made for the MDJ but it is dated further back which threw me for a loop too.

travisobvs said:
No I did not,
Truthfully I am a pretty big Noob to all of this and was afraid of changing my kernel to MF3 from MDJ. I really didn't know how that would affect my phone / carrier situation here in Canada. The main problem was that I could not get the phone into recovery mode. Turns out I just needed to re-root the phone. So when I got the phone to actually go into recovery I jumped at the CM Rom. When I find a forum that helps me understand what updating my Kernel does to my phone I will try to update Kernel and go back to CleanRom. I kind of miss multiwindow.... maybe a little bit of Touchwiz...
Thanks for the reply!
EDIT : I also found this : http://www.scottsroms.com/downloads.php?do=file&id=421 which is a version of CleanROM made for the MDJ but it is dated further back which threw me for a loop too.
Click to expand...
Click to collapse
No worries and you're very welcome! Don't sweat, I'm still on stock ROM because I'm hesitant to make the ROM dive. Don't know how or if installing MF3 kernel via custom ROM would affect the phone in terms of rooting or custom recovery either. I'd probably be sticking with MDJ build if possible.
You and me both on multiwindow! Helps a ton when it comes to referencing something while emailing/texting! I'd miss the TW camera as well ... maybe. haha
Which version of TWRP are you on? Version 2.6 has an often-experienced issue where it just hangs at the "teamwin" splash screen. Downgrading to 2.5.0.2 resolves that.

Any updates?
bo8 said:
No worries and you're very welcome! Don't sweat, I'm still on stock ROM because I'm hesitant to make the ROM dive. Don't know how or if installing MF3 kernel via custom ROM would affect the phone in terms of rooting or custom recovery either. I'd probably be sticking with MDJ build if possible.
You and me both on multiwindow! Helps a ton when it comes to referencing something while emailing/texting! I'd miss the TW camera as well ... maybe. haha
Which version of TWRP are you on? Version 2.6 has an often-experienced issue where it just hangs at the "teamwin" splash screen. Downgrading to 2.5.0.2 resolves that.
Click to expand...
Click to collapse
Hey guys,
I am also a 1337m Rogers S4 (MDJ) owner, also a noob as well. I managed to flash my phone with CM and had a pretty good AOSP experience and learned a little bit on the way. I can legitimately say that I miss a couple thing about stock / Touch wiz, mainly the multiwindow support and camera. Cyanogenmod is also acting up and drains battery pretty bad when I am roaming in the states.
What did you guys end up doing? Did you update your base-band to mdk and install CleanRom? Right now that looks like it's my goal but I truthfully have no idea how to do it.
Did you guys go back to stock after changing? Do I just find a stock ROM on the forum and use ODIN to bring it back?
Is switching roms as easy as choosing something in Goo manager or do you need to go into a recovery in recovery mode?
Thank you!

No WiFi on this ROM (Google Edition 4.2.2)

So I recently got this ROM: http://forum.xda-developers.com/showthread.php?t=2428254. I got the DEODEX version, and when I try to turn wifi on, it just switches back to off. I tried clicking the WiFi fix links in the thread, but they wouldn't work. What do I do? I have a SGH-I337, by the way.

Conmore said:
So I recently got this ROM: http://forum.xda-developers.com/showthread.php?t=2428254. I got the DEODEX version, and when I try to turn wifi on, it just switches back to off. I tried clicking the WiFi fix links in the thread, but they wouldn't work. What do I do? I have a SGH-I337, by the way.
Click to expand...
Click to collapse
What can you do?
For one thing you can flash a custom rom which is a finished product.
But if you want to fool around with Google Edition roms you can try this little trick,
reboot the phone and toggle the wifi on and off 3 or 4 times waiting about 10 seconds
between toggling. For some people this little trick temporarily fixed the wifi issue.

Misterjunky said:
What can you do?
For one thing you can flash a custom rom which is a finished product.
But if you want to fool around with Google Edition roms you can try this little trick,
reboot the phone and toggle the wifi on and off 3 or 4 times waiting about 10 seconds
between toggling. For some people this little trick temporarily fixed the wifi issue.
Click to expand...
Click to collapse
Would you happen to know of any Google Edition ROMS that are trustworthy for the GS4 that are compatible with Safestrap?

re:custom roms
Conmore said:
Would you happen to know of any Google Edition ROMS that are trustworthy for the GS4 that are compatible with Safestrap?
Click to expand...
Click to collapse
I am assuming that you have never done an OTA and updated to the official
MF3 4.3 firmware yet, if you have done an OTA MF3 update then ignore this post.
There are no google edition 4.3 roms which are safestrap compatible as of yet.
So far only the Jellybean Touchwiz 4.2.2 custom roms are compatible with it.
The only reason that your phone is working with the google edition rom
is because it's based on version 4.2.2 rom.
None of the developers are going to create a full featured custom google
edition 4.2.2 rom since the official 4.3 firmware is available.
However if you want to try a full featured Touchwiz Jellybean custom rom
which I would highly suggest.
This custom rom is based on the Samsung Galaxy S4 Touchwiz Jellybean 4.2.2 firmware.
It's called "Darthstalker v9" and it's really excellent.
Here is the link to it: http://forum.xda-developers.com/showthread.php?t=2426081
(safestrap compatible)
Give it a try, good luck! .

Misterjunky said:
I am assuming that you have never done an OTA and updated to the official
MF3 4.3 firmware yet, if you have done an OTA MF3 update then ignore this post.
There are no google edition 4.3 roms which are safestrap compatible as of yet.
So far only the Jellybean Touchwiz 4.2.2 custom roms are compatible with it.
The only reason that your phone is working with the google edition rom
is because it's based on version 4.2.2 rom.
None of the developers are going to create a full featured custom google
edition 4.2.2 rom since the official 4.3 firmware is available.
However if you want to try a full featured Touchwiz Jellybean custom rom
which I would highly suggest.
This custom rom is based on the Samsung Galaxy S4 Touchwiz Jellybean 4.2.2 firmware.
It's called "Darthstalker v9" and it's really excellent.
Here is the link to it: http://forum.xda-developers.com/showthread.php?t=2426081
(safestrap compatible)
Give it a try, good luck! .
Click to expand...
Click to collapse
MF3 4.3 firmware? I thought MF3 was 4.2.2, and 4.3 is MFJ or something like that. But I am on MF3, 4.2.2, I have Safestrap, and I can install ROM's. So should I still check out your suggestion?

re: roms/mf3
Conmore said:
MF3 4.3 firmware? I thought MF3 was 4.2.2, and 4.3 is MFJ or something like that. But I am on MF3, 4.2.2, I have Safestrap, and I can install ROM's. So should I still check out your suggestion?
Click to expand...
Click to collapse
Read this thread: http://forum.xda-developers.com/showthread.php?t=2428254
It will explain it all to you in great detail, the thread also has links where you can
go directly to the custom rom thread and download "Darthstalker v9" rom & others.
Currently there are only three full featured custom roms which are fully compatible with MF3.
Darthstalker v9 is one of them and it was very recently updated.
You will see the links to them on the very first post.
Good luck!
Remember it takes less time to click the "THANKS" button than it takes to type "thank you"

Misterjunky said:
Read this thread: http://forum.xda-developers.com/showthread.php?t=2428254
It will explain it all to you in great detail, the thread also has links where you can
go directly to the custom rom thread and download "Darthstalker v9" rom & others.
Currently there are only three full featured custom roms which are fully compatible with MF3.
Darthstalker v9 is one of them and it was very recently updated.
You will see the links to them on the very first post.
Good luck!
Remember it takes less time to click the "THANKS" button than it takes to type "thank you"
Click to expand...
Click to collapse
OK, so now I'm not getting WiFi on the rom you recommended, which is amazing by the way.
Edit: Fixed it, forgot to flash kernel modules, was looking at the wrong thread. :/

Kernel modules for MF3
Conmore said:
OK, so now I'm not getting WiFi on the rom you recommended, which is amazing by the way.
Edit: Fixed it, forgot to flash kernel modules, was looking at the wrong thread. :/
Click to expand...
Click to collapse
Hi, you said you forgot to flash the kernel modules to get wifi working with MF3, but when you did, wifi was working correctly. I cant FOR THE LIFE of me figure out how to get my wifi working. I flashed the "jflteatt-MF3-modules.zip" file from Hashcode's safestrap forum, but cannot get it to work. Ive also wiped everything and tried flashing the rom and module again, but no luck. Do you have links or can you tell me which kernel I should be flashing please? I really love Darthstalker and this is the only thing holding me back..
EDIT: Nevermind... Thank you anyway.. I re-downloaded the module and re-did the whole flashing process. Its working now.. Weird. Ive done the same thing atleast 5 times.. Oh Well.. Im happy now! :victory:

Conmore said:
So I recently got this ROM: http://forum.xda-developers.com/showthread.php?t=2428254. I got the DEODEX version, and when I try to turn wifi on, it just switches back to off. I tried clicking the WiFi fix links in the thread, but they wouldn't work. What do I do? I have a SGH-I337, by the way.
Click to expand...
Click to collapse
I didn't see anyone mention it so i'll tell you - this is a simple fix.
If you are running MF3 and are using this GPE Rom 4.2.2 via SafeStrap, you need to simply flash the kernel for MF3 AFTER you've flashed the GPE Rom.
You can A.) Wipe your current Rom-Slot, flash the ROM itself then immediately flash the kernel provided at (http://forum.xda-developers.com/showthread.php?t=2448925) ---> Just above "Manually remove SafeStrap"
Or you can B.) Just flash the kernel zip package over the same Rom-Slot you have the Google Play Edition Rom 4.2.2 on.

[Q] CM11 Problem.. Help Needed

Hi all,
I am interested in the CM11 ROM. Last night I spent 6hrs trying and failed, epically.
Here is what I did already:
1. Downgraded from 4.4.2 back to factory
2. Successfully rooted
3. Installed ROM Manager
4. Successfully downloaded CM11 and latest GApps
Then when I tried to boot into recovery it kept going to a screen with a little android guy lying on his back with a red triangle!!! I tried six times.
I got frustrated and just updated back to 4.4.2 and have been dealing with it. I am still rooted and have been able to remove my bloatware and other things you need root access for.
Any thoughts or help as to how I can install the CM11 rom?? I am happy running NovaLauncher and using DynamicNotifications to approximate it but really want to try out CM11.
Cheers and thanks!

Lucky there is no way to root on 4.4.2 yet or atleast no Recovery's yet it could be worse you're atleast rooted and it didn't brick your phone
Sent from my VS980 4G using Tapatalk

Did you actually try flashing a recovery first? Just installing ROM manager won't install the custom recovery needed to flash ROMs. You have to do that step as well.

JRJ442 said:
Did you actually try flashing a recovery first? Just installing ROM manager won't install the custom recovery needed to flash ROMs. You have to do that step as well.
Click to expand...
Click to collapse
No, I didn't. I am super new with android. Had an iphone for a long time. How do I flash a recover? Can I still do it now on 4.4.2 b/c its rooted?
Sorry about the noob questions, everyone is being very helpful!

follow this step..
http://forum.xda-developers.com/showthread.php?t=2681205

android_nashville said:
No, I didn't. I am super new with android. Had an iphone for a long time. How do I flash a recover? Can I still do it now on 4.4.2 b/c its rooted?
Sorry about the noob questions, everyone is being very helpful!
Click to expand...
Click to collapse
LG blocked the Loki exploit with 4.4.2 so you can't flash recoveries currently. You'd have to flash back to 4.2.2 to do that. Which if you want custom ROMs now its going to have to be done sooner or later. Which carrier and model number do you have? If you have an international D802 the above post by @zekurosu will work for you, otherwise don't use that one. You're gonna have to find the method for your model number.

My first guess was that you missed the flashing the custom recovery step, which people above me have already helped ya out on. For being new to Android you did fairly well, you just missed that one step.
Good luck!

JRJ442 said:
LG blocked the Loki exploit with 4.4.2 so you can't flash recoveries currently. You'd have to flash back to 4.2.2 to do that. Which if you want custom ROMs now its going to have to be done sooner or later. Which carrier and model number do you have? If you have an international D802 the above post by @zekurosu will work for you, otherwise don't use that one. You're gonna have to find the method for your model number.
Click to expand...
Click to collapse
thanks, forgot to mention it was only for D802 :good:

zekurosu said:
thanks, forgot to mention it was only for D802 :good:
Click to expand...
Click to collapse
I have an ATT D800 running 4.4.2. I can't decide whether its worth it to flash back to 4.2.2 to try again. Pretty happy with NovaLauncher + widgetlocke and fairly closely approximates what I am looking for.
For what its worth, I was in 4.2.2 when I tried the first time and failed. I think mackster is right, I didn't flash the custom recovery. I basically flashed back to 4.2.2->rooted->tried to boot into recovery (OVER and OVER) then gave up and upgraded back to 4.4.2.
Thanks for all the help. At least I now have a rooted phone and have been able to do some cool stuff with that. My goal is to get nexus 5 software in an LG G2 body (battery, camera, etc)

@android_nashville There's a way to have the best of both worlds. You can flash back to 4.2.2 (10d preferably) root, flash a custom recovery with Flashify or FreeGee. Both available on the play store. Then actually update to 4.4.2 following this thread http://forum.xda-developers.com/showthread.php?t=2483043. Eventually, if you want to flash custom ROMs you're going to have flash back to 4.2.2 and do this process regardless. The 4.4 aboot image (bootloader) can't be bypassed with Loki. Its been blocked. But some brilliant devs basically found out they can make a hybrid setup, with the 4.2.2 aboot, and everything else 4.4.2. This way you can have the ability to flash custom recovery, kernels and ROMs.

[Q] Rooting and ROMS

I am really new to this, so I apologize if I seem ignorant. Last time I went down this road, I didn't do my research and accidentally messed up the stock recovery. I am now unrooted and running the following:
AT&T Galaxy S4
Android 4.4.2
Build: KOT49H.I337UCUFNC1
Here's what I want to do:
Root my device
Install SafeStrap recovery (I don't know if this is still compatible since the KitKat update)
Use SafeStrap to run a custom ROM that's closer to stock android. Maybe CM or something AOSP based. Like I said, I don't know much about this.
Please let me know if I'm barking up the wrong tree. I'm just getting really tired of TouchWiz. Up until now I've just been sideloading Google Now Launcher and some other stock apps like the Clock and Calculator. Once again, I apologize for my ignorance - I'm still working on learning more about this. Thanks in advance!

go4bacon said:
I am really new to this, so I apologize if I seem ignorant. Last time I went down this road, I didn't do my research and accidentally messed up the stock recovery. I am now unrooted and running the following:
AT&T Galaxy S4
Android 4.4.2
Build: KOT49H.I337UCUFNC1
Here's what I want to do:
Root my device
Install SafeStrap recovery (I don't know if this is still compatible since the KitKat update)
Use SafeStrap to run a custom ROM that's closer to stock android. Maybe CM or something AOSP based. Like I said, I don't know much about this.
Please let me know if I'm barking up the wrong tree. I'm just getting really tired of TouchWiz. Up until now I've just been sideloading Google Now Launcher and some other stock apps like the Clock and Calculator. Once again, I apologize for my ignorance - I'm still working on learning more about this. Thanks in advance!
Click to expand...
Click to collapse
I don't know if you went down this road before since your questions don't show.
1. You can't install custom recoveries or roms on the build you have.
2. You can only downgrade to Mk2 to root since it's imposible to root on your present build.
On the general section there are a few threads that guide you to downgrade ,root, and flash compatible roms.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app

go4bacon said:
Maybe CM or something AOSP based. Like I said, I don't know much about this.
Click to expand...
Click to collapse
Not gonna happen, at least for now. The best you could do is PurifieD which completely trashes TouchWiz's theme. You'd also have to follow the steps here to get root on NC1. I'd advise against taking the bootloader but I believe you already have it if you took NC1 OTA. Then you could flash PurifieD over your stock slot in Safestrap 3.72.
Basically:
Root via downgrading to MK2
Flash rooted NC1 (no BL)
Install and boot into Safestrap 3.72, flash PurifieD (wipe not necessary)
If you wish to keep Knox happy with 0x0, do not let PurifieD modify the kernel during the Aroma installer
Flash an i337 build.prop in order to get 4G LTE working again (you have service without this, but this lets you access LTE again) (you can find this here!)
Flash the WiFi module in order to get wifi working again (WiFi will NOT work unless you flash this) (you can find this here!)
(Optional, I had to do this as I had issues with keeping root on PurifieD, though you might not!) Flash SuperSU again (you can find this here!
Feel free to ask for more help if anything was not clear!

Need help finding a 4.4 KitKat stock rom for my sm-g530t please!!

Hey guys, im having trouble finding a stock version of android 4.4 KitKat for my Samsung Galaxy Grand Prime (sm-g530t variant) because im trying to get pretty much any version of LineageOS thats Marshmallow and above, but they all require me to have 4.4 kitkat installed, and i simply cannot find it ANYWHERE. if anyone out there can provide me a link, or send me a link to like google drive with a backup of a freshly stock factory reset backup? Just something please, im getting quite desperate as i cannot afford a new phone, but 5.1.1 is giving me all sorts of hell, what with not having adoptable storage and whatnot. So if anyone can help me out, it would be GREATLY appreciated, as i have searched and searched and searched for literally HOURS trying to find 4.4 for this thing, and i never found one. for reference, if need be, im trying to get LineageOS 15.1 or 15.0, if that helps too, but i dont know, im sort of a noob in a way. I can and have flashed a few alternate roms, but i need 4.4 for Lineage. Also, ive already checked on Sammobile, and the only firmware they have is 5.1.1. Ive even searched around XDA quite a bit, and still cant find it :crying: Thanks to all who can help, and have a great day!

Nightstorm229 said:
Hey guys, im having trouble finding a stock version of android 4.4 KitKat for my Samsung Galaxy Grand Prime (sm-g530t variant) because im trying to get pretty much any version of LineageOS thats Marshmallow and above, but they all require me to have 4.4 kitkat installed, and i simply cannot find it ANYWHERE. if anyone out there can provide me a link, or send me a link to like google drive with a backup of a freshly stock factory reset backup? Just something please, im getting quite desperate as i cannot afford a new phone, but 5.1.1 is giving me all sorts of hell, what with not having adoptable storage and whatnot. So if anyone can help me out, it would be GREATLY appreciated, as i have searched and searched and searched for literally HOURS trying to find 4.4 for this thing, and i never found one. for reference, if need be, im trying to get LineageOS 15.1 or 15.0, if that helps too, but i dont know, im sort of a noob in a way. I can and have flashed a few alternate roms, but i need 4.4 for Lineage. Also, ive already checked on Sammobile, and the only firmware they have is 5.1.1. Ive even searched around XDA quite a bit, and still cant find it :crying: Thanks to all who can help, and have a great day!
Click to expand...
Click to collapse
You need *4.4 and above* to install lineage. So having 5.1.1 is fine as well.

vince2678 said:
You need *4.4 and above* to install lineage. So having 5.1.1 is fine as well.
Click to expand...
Click to collapse
see, thats the thing. ive already tried flashing it with 5.1.1, and it just loopedon the boot animation, i let it run for a solid hour, and still didnt do anything.. i honestly dont know what to try next, i just need it to work. any further help and clarification would be most appreciated!

Lineage 15 isn't working yet. Use the July 2017 build of Lineage 14. There's a few bugs, but I use it just fine. Be sure you are using the correct version of TWRP. I think I had to downgrade TWRP to install Lineage 14.

Scoobio said:
Lineage 15 isn't working yet. Use the July 2017 build of Lineage 14. There's a few bugs, but I use it just fine. Be sure you are using the correct version of TWRP. I think I had to downgrade TWRP to install Lineage 14.
Click to expand...
Click to collapse
Oh, alright. i didnt know i had to use a specific version of TWRP, so i guess thats also on the list lol. Do you think it would make a difference if my current rom was a stock TW rom, but deodexed, debloated, and rooted?

Nightstorm229 said:
Oh, alright. i didnt know i had to use a specific version of TWRP, so i guess thats also on the list lol. Do you think it would make a difference if my current rom was a stock TW rom, but deodexed, debloated, and rooted?
Click to expand...
Click to collapse
Nope. Your stock TW ROM doesn't needs to be deodexed, de-bloted or anything. Only thing you need is a custom TWRP recovery to flash the ROM.

tasnim_tamim said:
Nope. Your stock TW ROM doesn't needs to be deodexed, de-bloted or anything. Only thing you need is a custom TWRP recovery to flash the ROM.
Click to expand...
Click to collapse
it still doesnt work actually, ive tried both the LineageOS 14.1, 14.0, and the Resserection Reborn roms. none of them work with a deodexed and de-bloated rom.

Nightstorm229 said:
it still doesnt work actually, ive tried both the LineageOS 14.1, 14.0, and the Resserection Reborn roms. none of them work with a deodexed and de-bloated rom.
Click to expand...
Click to collapse
You're probably doing something wrong if that's the case.
Check if:
- You're flashing images for the proper device (SM-G530T1/gprimelte),
- You're using ODIN or TWRP correctly,
- Your images are not corrupt (there are MD5 files with each build for md5 verification, and zip signature checks with TWRP),
- Your device is hardware unlocked via Developer Options in the stock ROM,
- FRP lock is disabled on your device.

Let me know if you get back to stock 5.1.1 because nothing works. Im forced to use june version of lineage 14.1

got back to a working stock 5.1.1
https://forum.xda-developers.com/gr...ch-samsung-t3755208/post75696587#post75696587

vince2678 said:
You're probably doing something wrong if that's the case.
Check if:
- You're flashing images for the proper device (SM-G530T1/gprimelte),
- You're using ODIN or TWRP correctly,
- Your images are not corrupt (there are MD5 files with each build for md5 verification, and zip signature checks with TWRP),
- Your device is hardware unlocked via Developer Options in the stock ROM,
- FRP lock is disabled on your device.
Click to expand...
Click to collapse
Yeah i have checked all of those to make sure, but it seems yo just not want to use any other roms. The only rom i got to work was a debloated deodexed rom. If yhere is any other thing you think im possibly screwing up on, please do tell, thanks!