From KitKat to JellyBean - Nexus 4 Q&A, Help & Troubleshooting

Hi guys, I just recently(like 3 days ago) got a Nexus 4. My cousin had installed the stock 4.4.2 Kitkat, and then I flashed Purity Rom(Latest 4.4.2).
After a while I read about SlimBean(4.3) and decided to download and try. I flashed it with CWM and all was well, except Wifi wasn't turning on and the Dialer app took about 10 seconds to select a number, also I couldn't pickup a call because it was really, really laggy. So now I'm back on Purity and currently downloading Paranoid Android 3.99RC2. Should there be any steps/methods I should follow? I am on .98 Baseband, thanks!

iG0tB00ts said:
Hi guys, I just recently(like 3 days ago) got a Nexus 4. My cousin had installed the stock 4.4.2 Kitkat, and then I flashed Purity Rom(Latest 4.2.2).
After a while I read about SlimBean(4.3) and decided to download and try. I flashed it with CWM and all was well, except Wifi wasn't turning on and the Dialer app took about 10 seconds to select a number, also I couldn't pickup a call because it was really, really laggy. So now I'm back on Purity and currently downloading Paranoid Android 3.99RC2. Should there be any steps/methods I should follow? I am on .98 Baseband, thanks!
Click to expand...
Click to collapse
A full wipe is a must! Other than that you should be good to go! In my opinion, I would stick with Purity for now. I heard that Pa 4 is right around the corner tho.
Sent from my Nexus 7 (2013)

Don't recommend going from purity to slim beam in my experience purity is better
Sent from my Nexus 4 using xda premium

Did you try flashing a different radio?

iG0tB00ts said:
Hi guys, I just recently(like 3 days ago) got a Nexus 4. My cousin had installed the stock 4.4.2 Kitkat, and then I flashed Purity Rom(Latest 4.4.2).
After a while I read about SlimBean(4.3) and decided to download and try. I flashed it with CWM and all was well, except Wifi wasn't turning on and the Dialer app took about 10 seconds to select a number, also I couldn't pickup a call because it was really, really laggy. So now I'm back on Purity and currently downloading Paranoid Android 3.99RC2. Should there be any steps/methods I should follow? I am on .98 Baseband, thanks!
Click to expand...
Click to collapse
If you downgrade to Jellybean 4.3 then you also need to flash 0.84 radio because KitKat radios (0.97 and 0.98) will have wifi issues with JB ROM's.

taodan said:
If you downgrade to Jellybean 4.3 then you also need to flash 0.84 radio because KitKat radios (0.97 and 0.98) will have wifi issues with JB ROM's.
Click to expand...
Click to collapse
The radio didn't cross my mind.
Thanks!
Sent from my Nexus 7 (2013)

Flashed the 0.84
Yeah thanks for that, flashed the .84 and all is well. Came back to RastaKat though

Related

Downgrade from 4.3 to 4.2.2??

Hellow guys i make a full wipe and make the ota update to 4.3 but''' i notice some bug when i in the recent and swipe to delete the app some wire black rectagular in top! And lags openinapps!!! I just want to now if i can downgrade to 4.3 to 4.2.2? I going to wait to cyanogen mod team to make a 4.3 rom. And if i yes can doit how??
Im rooted and have twrp recovery.
Thanks guys!!
Sent from my Nexus 4 using Tapatalk 2
http://forum.xda-developers.com/showthread.php?t=2010312
Flash the stock images through fastboot.
I can see this too!
Sent from my Nexus 4 using xda premium
thanks guys i download de n_cry and work perfect is a awesome tool to have in are computers.
If you are going to flash custom ROM; use a toolkit to Root it; flash custom recovery of your choice. Then copy custom ROM to ur phone; go to recovery and flash it. You don't need to downgrade your boot loader.
Sent from my Nexus 4 using Tapatalk 4 Beta
badboy47 said:
If you are going to flash custom ROM; use a toolkit to Root it; flash custom recovery of your choice. Then copy custom ROM to ur phone; go to recovery and flash it. You don't need to downgrade your boot loader.
Sent from my Nexus 4 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Does this mean we can downgrade from 4.3 to 4.2.2 custom ROM?
I'm not having a good time with 4.3 stock rooted and custom kernel and thinking about going back to CM 10.1.2. All I need to do is flashing the custom ROM in recovery?
naeco said:
Does this mean we can downgrade from 4.3 to 4.2.2 custom ROM?
I'm not having a good time with 4.3 stock rooted and custom kernel and thinking about going back to CM 10.1.2. All I need to do is flashing the custom ROM in recovery?
Click to expand...
Click to collapse
Yes you will be fine. Before PA 4.3 rom was released, I was using Latest 4.3 bootloader with 4.2.2. I am going to revert to 4.2 as well. I noticed 4.3 battery is really good but sometime touchscreen doesnt response / volume buttons doesnt work.
badboy47 said:
Yes you will be fine. Before PA 4.3 rom was released, I was using Latest 4.3 bootloader with 4.2.2. I am going to revert to 4.2 as well. I noticed 4.3 battery is really good but sometime touchscreen doesnt response / volume buttons doesnt work.
Click to expand...
Click to collapse
for unresponsive screen go to 'developer options', 'hardware accelerated options', 'disable HW overlays' and select 'always use gpu for screen compositing'. Works for me but setting doesn't seem to stick on reboots.
^^ oh okay thanks but I am already back to the good old 4.2.2 .
Sent from my Nexus 4 using Tapatalk 4
Thank you dude..it works ,, i'm really stress with this unresponsive screen
Just to make sure!
badboy47 said:
If you are going to flash custom ROM; use a toolkit to Root it; flash custom recovery of your choice. Then copy custom ROM to ur phone; go to recovery and flash it. You don't need to downgrade your boot loader.
Sent from my Nexus 4 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Hi I´m quite new to this and did recently flash my second custom rom. I went from CM10.1 (4.2.2) back to stock image, and flashed
[AOSP]Official 4.3- S4 Google Edition- Finaly v2.0 - Feel the Experience of Nexus. The phone is running hot and I´m kind of dissapointed with the
lack of tweaks in Google Edition. So I´d like to go back to CM
So if I understand you right I can from 4.3 flash my stock image (from TWRP) which was on 4.2.2? Without worrying.
Did you make a nandroid backup when you were stock? That should be the easiest way to get back to stock. If you didn't then you will need to use odin to flash back to stock.
Sent from my SCH-I605 using Tapatalk

[Q] Custom Rom to stock 4.3?

The situation is fairly complex right now;
Earlier today;
I had my Nexus 7 (2012) running Paranoid Android 3.something with 4.2.2 as the base rom.
My objective was:
To update to Paranoid Android 3.the latest version (which uses 4.3 as the base rom)
What I did:
I downloaded both the latest rom + gapps from the proper xda site for Nexus 7 and tried flashing them from TWRP.
It installs the rom just fine, but gives me an error on the Gapps (Error 7, if that helps).
I'm guessing this is because I'm not on 4.3 but on 4.2.2. Can someone confirm this please?
What I have done now:
So I thought I should flash a stock 4.3 rom and then try installing the new PA rom. But The flashing method for the stock rom is completely different than a custom rom, it seems.
What I think I should do:
So, should I somehow install the stock 4.3 rom and THEN try to flash the new PA rom?
If not that, then what can I do to get to the latest Paranoid Android?
Thank you!
It is totally unnecessary to upgrade to stock 4.3 prior to PA 3.9x.
Firstly, which GAPPS package did you attempt to install? The packages for 4.2.2 and 4.3 are not interchangeable.
najaboy said:
It is totally unnecessary to upgrade to stock 4.3 prior to PA 3.9x.
Firstly, which GAPPS package did you attempt to install? The packages for 4.2.2 and 4.3 are not interchangeable.
Click to expand...
Click to collapse
The 4.3 gapps gives me an error and says incompatible rom, the 4.2.2 gapps installs just fine, but the my tablet is stuck at the PA boot logo.
If I'm on 4.3 stock, shouldn't it install 4.3 gapps and 4.2.2? :S
And if 4.2.2 is the right one for me, then what to do if I'm stuck at the boot?
railpressureflip said:
The 4.3 gapps gives me an error and says incompatible rom, the 4.2.2 gapps installs just fine, but the my tablet is stuck at the PA boot logo.
If I'm on 4.3 stock, shouldn't it install 4.3 gapps and 4.2.2? :S
And if 4.2.2 is the right one for me, then what to do if I'm stuck at the boot?
Click to expand...
Click to collapse
Are you using pa_gapps-full-4.3-20130808-signed.zip? There should be no issues using it with PA 3.9x. If you're having problems installing 3.9x with that package, you may have a corrupted download.
Sent from my Nexus 7 using Tapatalk 4
najaboy said:
Are you using pa_gapps-full-4.3-20130808-signed.zip? There should be no issues using it with PA 3.9x. If you're having problems installing 3.9x with that package, you may have a corrupted download.
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
All good now, I fixed it.
The issue was that the Paranoid Android rom link is of the 3.5x version, which is essentially a 4.2.2 rom. And that was the latest rom the PA poster had. I realized it's not 3.91, which was the one I needed. So I went fetching for it on google and finally found it, then ran the 4.3 gapps and **** was all good.
Thanks for your help though, I truly appreciate it!

[Q] [Question]I337M S4 Running Parandroid? Stable?

Hi xda members!
i am a noOb when it comes to anything android. Just switched from iOS. I did however manage to softbrick my s4 when attempting to flash the latest pacman rom for jfltecan. Nevertheless in the end I managed to restore to stock TW via Kies and factory reset. Guess what i'm asking is that is there a stable (daily driver stable) version of parandroid for Samsung Galaxy S4 SGH-I337M on Fido(rogers) in canada? I'm really looking forward to using the Halo))) function on the rom, i just love pie control. I was running CM 10.1 and it's a fantastic rom, but i'm looking for more features and no bloat ware. Thanks!
Another Question: Can i run i9505 roms on my i337m phone? from what i've read, it's definitely possible, after all the i337/m are the same as the i9505. :laugh:
Both pacman and paranoids nightlies right now are 4.3. A few people are having boot issues on the 4.3 for pacman and had to switch from TWRP to another recovery to get the nightlies working
seamonkey789 said:
Both pacman and paranoids nightlies right now are 4.3. A few people are having boot issues on the 4.3 for pacman and had to switch from TWRP to another recovery to get the nightlies working
Click to expand...
Click to collapse
What's wrong with TWRT? Should I switch to CWM? Can someone confirm that parandriod is working on i337m?
Okey so I can confirm that PA 3.96 jfltecan is working 95% of the time. So far so good... I did have to pull out the battery and hard restart a couple of times. I got stuck on blank welcome freaked me out. But just give it give minutes. I'm running CWM latest recovery. Tried TRW? (Sry forgot the spelling) got stuck on bootloop. BTW pacman and PA 4.3 didn't work for i337m as of today.
Sent from my SGH-I337M using XDA Premium 4 mobile app

[Q] Problem with 4.4.2

hi. I install kitkat 4.4.2 on my nexus 4 and everything be ok until now when i try install miui on my nexus and phone crash on logo google. Kitkat have new bootloader so it may be the reason for this problem ?? pleas help.
nosteres said:
hi. I install kitkat 4.4.2 on my nexus 4 and everything be ok until now when i try install miui on my nexus and phone crash on logo google. Kitkat have new bootloader so it may be the reason for this problem ?? pleas help.
Click to expand...
Click to collapse
I would just try to install 4.3 or even 4.2 (don't know what is miui built from) bootlader and radio. You can find the old ones in general section.
gt-kingz said:
I would just try to install 4.3 or even 4.2 (don't know what is miui built from) bootlader and radio. You can find the old ones in general section.
Click to expand...
Click to collapse
miui built is from jellybean 4.2.2. I did like you say i install 4.3 and everything fine, so bootloader make problems. Can i install 4.4 without newest bootloader??
nosteres said:
miui built is from jellybean 4.2.2. I did like you say i install 4.3 and everything fine, so bootloader make problems. Can i install 4.4 without newest bootloader??
Click to expand...
Click to collapse
Yes sir!

which Rom to Install I need Smooth experience

hi i am noob at all this but i would like to move from stock rom to something which can give nexus 7 2012 wifi smoother experience so recommend me some good rom which is working very well with this device i am currently on 5.1.1 Android
device is rooted
pleasant said:
hi i am noob at all this but i would like to move from stock rom to something which can give nexus 7 2012 wifi smoother experience so recommend me some good rom which is working very well with this device i am currently on 5.1.1 Android
device is rooted
Click to expand...
Click to collapse
Personally I would recommend any android 4.4.4 rom. Stock or custom is your choice.
All android versions after 5.0 doesn't performe good over longer times on the grouper.
I am using purity rom.
I have red that the unofficial slim rom 9.0 was just updated with patched stagefright.
motorazrv3 said:
Personally I would recommend any android 4.4.4 rom. Stock or custom is your choice.
All android versions after 5.0 doesn't performe good over longer times on the grouper.
I am using purity rom.
I have red that the unofficial slim rom 9.0 was just updated with patched stagefright.
Click to expand...
Click to collapse
can i flash the old Rom ? as i heard the myth that you cannot downgrade after upgrading to latest ?
yeah i would go for 4.4.4 as the device is unusable sometime on 5.1.1
can you link me to stock rom of 4.4.4 nexus 7 2012 (wifi only)
pleasant said:
can i flash the old Rom ? as i heard the myth that you cannot downgrade after upgrading to latest ?
yeah i would go for 4.4.4 as the device is unusable sometime on 5.1.1
can you link me to stock rom of 4.4.4 nexus 7 2012 (wifi only)
Click to expand...
Click to collapse
Never heard that you can't downgrade. I was on 5.1.1 and I am now on 4.4.4.
I used wugs nexus root kit or how it is called and went back to 4.4.4.
I hadn't any problems.
motorazrv3 said:
Never heard that you can't downgrade. I was on 5.1.1 and I am now on 4.4.4.
I used wugs nexus root kit or how it is called and went back to 4.4.4.
I hadn't any problems.
Click to expand...
Click to collapse
oh yes wugfresh i will use that for downgrade !
pleasant said:
oh yes wugfresh i will use that for downgrade !
Click to expand...
Click to collapse
You can give it a try. Just have all drivers installed and running and all should be fine.
Are you currently on stock?
If not and you are running a custom rom you can install a custom 4.4.4 rom via custom recovery.
yeah i have always used this device on Stock Rom
just flashed 4.4.4 using wugfresh and now device has become so quick like the way i bought Thanks for the help anything you would like to tell
What's the verdict on new marshmallow roms? Any good or still too new to tell?
AOSP 6.0 is running much better than 5.1.x on grouper, but there are still some minor issues you need to accept
- autorotate stops working after deep sleep
- sound some times stops (can be fixed be inserting a headset for a short time)
- sometimes a bit laggy, but much much better than 5.1.1
AndDiSa said:
AOSP 6.0 is running much better than 5.1.x on grouper, but there are still some minor issues you need to accept
- autorotate stops working after deep sleep
- sound some times stops (can be fixed be inserting a headset for a short time)
- sometimes a bit laggy, but much much better than 5.1.1
Click to expand...
Click to collapse
nexus 7 2012 will be update to 6.0 by google?
I think best version is 4.4.4, bu, i have some issues on USB dac, because i use on my car. Original lolipop + root + kernel oxydorevamp works fine (most time).
@rgp95: I was referring to the AOSP version provided by Dmitri Grinberg which can be flashed on your own risk.

Categories

Resources