Hello,
I have a problem with the rom CM 10.2 Engle_mars. I use actually CM10.1 and i send correctly sms but with CM10.2, directly i send a sms response is error 254
I check smsc with *#*#4636#*#* and for my smsc operator (mobistar = +32495002530 ) is correct.
someone has an idea?
Hi,
Same problem here.
And there s a third person, who has the same bug too, with CM 10.2 ROM.
Engle_Mars had the information (see the thread in Development Forum), and have to watch the log. We are waiting for a next answer.
Sent from my ME722 using xda app-developers app
thank's for this information . I'm feeling less alone
Same problem in Engle_Mars-CM10.2-20130816-UNOFFICIAL-milestone2 . :crying:
I don't found anything about this problem.
I test "DEFY Baseband Switcher 4.0" with baseband 2.3.4 (Great Britain). the phone work correctly but sms don't ...
:fingers-crossed: crossed fingers:fingers-crossed:
petri3 said:
thank's for this information . I'm feeling less alone
Same problem in Engle_Mars-CM10.2-20130816-UNOFFICIAL-milestone2 . :crying:
I don't found anything about this problem.
I test "DEFY Baseband Switcher 4.0" with baseband 2.3.4 (Great Britain). the phone work correctly but sms don't ...
:fingers-crossed: crossed fingers:fingers-crossed:
Click to expand...
Click to collapse
I don't know really what the cause was, but I solved the problem by reinstalling the ROM with full wipe data...
then just test to send a sms with the native application without configuring anything.
hope it will help...
mattheoh said:
I don't know really what the cause was, but I solved the problem by reinstalling the ROM with full wipe data...
then just test to send a sms with the native application without configuring anything.
hope it will help...
Click to expand...
Click to collapse
Hi!
I did full data wipe during initial 10.2 install, as well as cache/dalvik cleanup, and the problem was there from the beginning. I also force-closed the SMS/MMS app and cleared all its data and cache, and it also didn't help.
The following appears in the logcat during SMS send attempt:
Code:
V/SmsReceiverService( 7423): onStart: #1 mResultCode: -1 = Activity.RESULT_OK
D/dalvikvm( 1877): GC_EXPLICIT freed 414K, 30% free 5389K/7684K, paused 3ms+10ms, total 77ms
I/ ( 1335): opprofdaemon: OPPROF_DAEMON_translate_message(): Enter
I/ ( 1335): opprofdaemon: handle_bp_message(): Enter
I/ ( 1335): opprofdaemon: handle_log_all_ind(): Enter
I/ ( 1335): opprofdaemon: OPPROF_TRANSPORT_P.cc: handle_log_all_ind(): line=522: BP log all event=c
I/ ( 1335):
I/ ( 1335): opprofdaemon: OPPROF_TRANSPORT_P.cc: handle_log_all_ind(): line=557: Error: Incorrect BP log all data size: 48
I/ ( 1335):
I/ ( 1335): opprofdaemon: OPPROF_TRANSPORT_P.cc: handle_log_all_ind(): line=568: OPPROF TL: log_all
I/ ( 1335): opprofdaemon: handle_log_all_ind(): Exit
I/ ( 1335): opprofdaemon: handle_bp_message(): Exit
I/ ( 1335): opprofdaemon: OPPROF_DAEMON_translate_message(): Exit
V/SmsReceiverService( 7423): onStart: #1 mResultCode: 1 = SmsManager.RESULT_ERROR_GENERIC_FAILURE
Regards, Pavel
I wipe all : /data /system /cache and the rest ... Now, i send sms correctly ... :good:
thanks for the solution :victory:
petri3 said:
I wipe all : /data /system /cache and the rest ... Now, i send sms correctly ... :good:
thanks for the solution :victory:
Click to expand...
Click to collapse
thanks a lot for this funny post you made my day!
wipe all -> espacially "system" is my favourite
but don't cry when no rom is installed afterwards
by the way... system is formatted by script in engle_mars's rom zip. so a data wipe is enough. cache and dalvik cache are on the data partition and are wiped automatically when you wipe data....
mattheoh said:
I don't know really what the cause was, but I solved the problem by reinstalling the ROM with full wipe data...
then just test to send a sms with the native application without configuring anything.
hope it will help...
Click to expand...
Click to collapse
This usually helps. back up the data with titanium and restore after reflashing.
linxiafeibai said:
This usually helps. back up the data with titanium and restore after reflashing.
Click to expand...
Click to collapse
Or use Wondershare MobileGO to backup everything
Dear Sirs, I was trying to to understand installing on Engle_Mars-SELinux-CM10.2-20131021. Now I have Retail British MILS2_U6_4.1-22_SIGNED_UCAMILESTONE2B1B80E1014.0R_UCXMILE2GBQWRTGB_P016_A006_HWp2a_Service1FF.sbf.gz. What should I do?
Root?
clockworkmod 6???
Or Team Win Recovery Project????
Thank You
I got it, I had to first get root and burn for cm10.
battery are lasting many hours?
Not very long.
About 60% battery supports about 22h. This is a backup battery which had been in storage mode for months.
For a "Active" battery, I could get about 70% battery for about 2 days.
I'm having trouble updating applications play in store, the 403 error appears on all updates. I looked for solutions on google without success. Someone with the same problem? How to solve?
hi,when i touch bluetooth phone will be reboot and allway live at the cm logo.
Pacau said:
I'm having trouble updating applications play in store, the 403 error appears on all updates. I looked for solutions on google without success. Someone with the same problem? How to solve?
Click to expand...
Click to collapse
I updated via OTA to android 4.4 and everything is working again perfectly. Thank you Engle_Mars!
Sorry for the OT, but how does kitkat feel?
Sent from my A953 using xda app-developers app
dat00 said:
Dear Sirs, I was trying to to understand installing on Engle_Mars-SELinux-CM10.2-20131021. Now I have Retail British MILS2_U6_4.1-22_SIGNED_UCAMILESTONE2B1B80E1014.0R_UCXMILE2GBQWRTGB_P016_A006_HWp2a_Service1FF.sbf.gz. What should I do?
Root?
clockworkmod 6???
Or Team Win Recovery Project????
Thank You
Click to expand...
Click to collapse
Hi dat00,
See the steps bellow:
1) Root your phone (you may use SuperOneClick root method)
2) Install Droid2 Bootstrap Recovery
3) Open Droid2 Bootstrap Recovery and tap "Bootstrap Recovery", then "Reboot Recovery" granting root privileges. The phone should reboot into recovery. Use volume buttons to navigate, camera button to accept, power button to go back. You will install files by selecting "Install zip from sdcard".
4) Optionally: create a backup of your data
5) Install latest CM ROM image file.
6) Optionally: install Google Apps
7) Select "Wipe data/factory reset"
8) Reboot and enjoy
Credits from tezet's cm10 topic: http://forum.xda-developers.com/showthread.php?t=1827801
After install the CM10 tezet's version you should be able to instal any custom rom like KitKat from Eagle or czechop version. Refer's to Yet another CM10.2 (http://forum.xda-developers.com/showthread.php?t=2451742)
Related
i bricked my sgy last week
actually i installed a new kernal to overclock sgy
-i installed jellyblast rom
-installed creedsix rom
-installesd new kernal
-wipe data, cache, dalvik cache
problem
-stuck in samsung galaxy y logo
-flashed too many times, still stuck in samsung galaxy y logo
i flashed at least 30 times, with different firmwares.
but still no luck, still stuck there.
i had definitely no idea what to do.
help me. thanks.
Try Flashing the Stock Firmware with ODIN. Search for the Stock Firmware Thread in XDA. If you tried that and it didn't work, you may have to take it to the Service Centre....Here's a tutorial you could find help from--http://forum.xda-developers.com/showthread.php?t=1640668
mayank_saxena said:
i bricked my sgy last week
actually i installed a new kernal to overclock sgy
-i installed jellyblast rom
-installed creedsix rom
-installesd new kernal
-wipe data, cache, dalvik cache
problem
-stuck in samsung galaxy y logo
-flashed too many times, still stuck in samsung galaxy y logo
i flashed at least 30 times, with different firmwares.
but still no luck, still stuck there.
i had definitely no idea what to do.
help me. thanks.
Click to expand...
Click to collapse
Turn it on and leave it off for a day,then try again :good:
Status 7 stands for incorrect zip file.
Btw, i don't get it. Your title asks a question and your post says something else.
||I'm just a PM away for help||
anasdcool71 said:
Status 7 stands for incorrect zip file.
Btw, i don't get it. Your title asks a question and your post says something else.
||I'm just a PM away for help||
Click to expand...
Click to collapse
I am not able to start my phone.
Every time i switch on it .The phone gets stuck on the samasung galay y logo.
When I went in the Android System Recovery Mode (not in CWM) there were lines written in the end stating:
E:failed to mount/cache (Invalid argument)
E: Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
And when I went into the CWM tried to flash savie kernel #73 went to device information it stated as follows:
Your Device System and Partition Information
Brand : (didnt state any thing)
Model : (didnt state any thing)
Baseband : (didnt state any thing)
Build Number : (didnt state any thing)
Board Name : (didnt state any thing)
CPU : (didnt state any thing)
LCD Density : (didnt state any thing)
System Size : -1 MB
Free : -1 MB
Data SIze : -1 MB
Free: -1MB
SD Card Size : 969MB
Free : 809MB
SD-EXT Size :-1MB
Free : -1MB
and when I started the installation of this kernel it stoped and stated
" assert failed:
getprop("ro.product.device") ==
"GT-S5360" "
and also stated
Installer Status:7
.
I tried to flash the stock rom and checked the device information and now it stated as follows:
Your Device System and Partition Information
Brand : samsung
Model : GT-S5360
Baseband : S5360DDLE1
Build Number : GINGERBREAD.DDLE1
Board Name : totoro
CPU : armeabi
LCD Density : 120
System Size : -1 MB
Free : -1 MB
Data SIze : -1 MB
Free: -1MB
SD Card Size : 969MB
Free : 809MB
SD-EXT Size :-1MB
Free : -1MB
but when i started the installation of this kernel. Still the error was same.
Now please tell me what to do .
Please tell me via CWM
Help me asap.
Thanks
mayank_saxena said:
I am not able to start my phone.
Every time i switch on it .The phone gets stuck on the samasung galay y logo.
When I went in the Android System Recovery Mode (not in CWM) there were lines written in the end stating:
E:failed to mount/cache (Invalid argument)
E: Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
And when I went into the CWM tried to flash savie kernel #73 went to device information it stated as follows:
Your Device System and Partition Information
Brand : (didnt state any thing)
Model : (didnt state any thing)
Baseband : (didnt state any thing)
Build Number : (didnt state any thing)
Board Name : (didnt state any thing)
CPU : (didnt state any thing)
LCD Density : (didnt state any thing)
System Size : -1 MB
Free : -1 MB
Data SIze : -1 MB
Free: -1MB
SD Card Size : 969MB
Free : 809MB
SD-EXT Size :-1MB
Free : -1MB
and when I started the installation of this kernel it stoped and stated
" assert failed:
getprop("ro.product.device") ==
"GT-S5360" "
and also stated
Installer Status:7
.
I tried to flash the stock rom and checked the device information and now it stated as follows:
Your Device System and Partition Information
Brand : samsung
Model : GT-S5360
Baseband : S5360DDLE1
Build Number : GINGERBREAD.DDLE1
Board Name : totoro
CPU : armeabi
LCD Density : 120
System Size : -1 MB
Free : -1 MB
Data SIze : -1 MB
Free: -1MB
SD Card Size : 969MB
Free : 809MB
SD-EXT Size :-1MB
Free : -1MB
but when i started the installation of this kernel. Still the error was same.
Now please tell me what to do .
Please tell me via CWM
Help me asap.
Thanks
Click to expand...
Click to collapse
u need to flast stock rom via odin. go to this site it will surely help u http://s5360rom.blogspot.com/p/how-to-install-or-flash-stock-rom-on.html
please press thanks if i helped u.
mayank_saxena said:
I am not able to start my phone.
Every time i switch on it .The phone gets stuck on the samasung galay y logo.
When I went in the Android System Recovery Mode (not in CWM) there were lines written in the end stating:
E:failed to mount/cache (Invalid argument)
E: Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
And when I went into the CWM tried to flash savie kernel #73 went to device information it stated as follows:
Your Device System and Partition Information
Brand : (didnt state any thing)
Model : (didnt state any thing)
Baseband : (didnt state any thing)
Build Number : (didnt state any thing)
Board Name : (didnt state any thing)
CPU : (didnt state any thing)
LCD Density : (didnt state any thing)
System Size : -1 MB
Free : -1 MB
Data SIze : -1 MB
Free: -1MB
SD Card Size : 969MB
Free : 809MB
SD-EXT Size :-1MB
Free : -1MB
and when I started the installation of this kernel it stoped and stated
" assert failed:
getprop("ro.product.device") ==
"GT-S5360" "
and also stated
Installer Status:7
.
I tried to flash the stock rom and checked the device information and now it stated as follows:
Your Device System and Partition Information
Brand : samsung
Model : GT-S5360
Baseband : S5360DDLE1
Build Number : GINGERBREAD.DDLE1
Board Name : totoro
CPU : armeabi
LCD Density : 120
System Size : -1 MB
Free : -1 MB
Data SIze : -1 MB
Free: -1MB
SD Card Size : 969MB
Free : 809MB
SD-EXT Size :-1MB
Free : -1MB
but when i started the installation of this kernel. Still the error was same.
Now please tell me what to do .
Please tell me via CWM
Help me asap.
Thanks
Click to expand...
Click to collapse
U will still be able to go into download mode
Down+home+Power
Get a stock rom from http://forum.xda-developers.com/showthread.php?t=1465800
And flash using odin
From where u got creed six rom...???
Sent from my GT-S5360 using xda app-developers app
Ritayan Roy said:
Try Flashing the Stock Firmware with ODIN. Search for the Stock Firmware Thread in XDA. If you tried that and it didn't work, you may have to take it to the Service Centre....Here's a tutorial you could find help from--http://forum.xda-developers.com/showthread.php?t=1640668
Click to expand...
Click to collapse
please tell me via CWM
anmolsharma1293 said:
From where u got creed six rom...???
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Didnt remember coz i switched to jellyblast after that.
U can view my problem above
I THINK U HAVE FLASHED ANOTHER PHONE ROM ON U R YOUNG THAT'S WHY IT IS HAPPENING I SUGGEST U TO FLASH STOCK ROM FROM ODIN OR TAKE IT TO SAMSUNG CENTRE
bY
-----------------------SS------------------------OO-----------------------------MM-------------------------KK------------------------LL
mayank_saxena said:
please tell me via CWM
Click to expand...
Click to collapse
Friend, I know you'd prefer CWM as you are a New User...Believe me, I too preferred CWM sometime ago..I bricked my phone atleast three times using CWM before I succesfully installed Merruk 2.5 Deluxe using ODIN(on first attempt)..you just follow the tutorial carefully.You'll get it done for sure..READ THIS AT FIRST-- http://forum.xda-developers.com/showthread.php?t=1640668
There's the ODIN section..Go through it and you'll find it much simpler...I did. Good Luck..!
mayank_saxena said:
please tell me via CWM
Click to expand...
Click to collapse
here u go .try this at your own risk.
Procedure to install Stock ROM in Samsung Galaxy Y GT-5360
1.First download the zip file (link https://hotfile.com/dl/164864526/e7ba5c1/clockworkmod.zip.html) in your computer,extract it. After extracting you will get a folder with three files i.e. Backup, Desktop.jpg, Thumbs.db. and then with the help of USB cable connect the Galaxy Y with computer to place the three files i.e. Backup, Desktop.jpg, Thumbs.db right away in the SD card inside clockworkmod folder. Do not place in any subfolder.
2.Detach the cable
3.Just check that in the backup files there is a folder DDLE1 and in that there is Nandroid.rsf.tar, System.rfs.tar, Cache.rfs.tar etc. if these are missing then again continue the process from beginning.
4.Now its time to turn off the Y to boot into Clockworkmod recovery by pressing the Volume Up key, Home and then power button together. In case you have install the creed ROM then press the power button and select the Clockwork Mod to boot the same.
5.Now wipe data and cache partition. After this select Backup & restore-> Restore-> DDLE1->Confirm-restore DDLE1 and wait for 10 minutes to flash the ROM.
6.When the installation is finished, select ‘Reboot system now’.
If this doesn’t work then you have use odin way.
PLZ PRESS THANKS
I hate to see the people getting their basics wrong and doing it all complicated.
1) First of all, DONT use Creed six ROM, its NOT an official one(not by creed series OP pratyush.creed), its outdated, way better ROMs out there now. Try USSRv8/ Jelly Blast/ Hyperion, they are way better than Creeds Six in every way.
2) Use only XDA posts/ROMs/Kernels to get the correct info, dont rely on 3rd party websites. If you cant find something in xda, you cant find anywhere!
3) Im assuming you are installing Merruk Kernel 2.5 (deluxe #206 kernel) which only supports overclock.
The error code you are getting there is due to the ext4 flashing. Merruk #206 involves the conversion of system,data and cache to ext4 and flashing the kernel in ext4, its a ALL-IN-ONE pack.
To get a perfect combo of flashing merruk dev #206 follow these steps:
1) Flash back to stock ROM (Refer to doky73 thread in development)
2) Flash any custom ROM you desire via CWM( Refer its thread for instructions)
3) Download and copy the latest merruk kernel package(#206 deluxe all-in-one pack) to SD card
4) Backup your ROM using nandroid backup option from CWM
5) Flash the merruk kernel zip via CWM
6) Now, Go to advanced restore in CWM and restore data,system, cache
7) Reboot..
Thats it, your phone is now installed with latest merruk kernel(which involves the overclocking capability).
its mean here is not any solution
its mean here is not any solution of real [Q] how to fix error status 7 in samsung galaxy y
we all know about odin packages on XDA...
i think here is cygwin software issue....... its not for all
or
is this solution?
extract the boot.img and flash it via fastboot. Then perform a Full Wipe and try to flash the ROM again....
An unlocked bootloader is recommend for flashing custom Roms and kernels.
i think its solution..
There is a prob in ur updater script
Sent from my GT-S5360 using XDA
Kashif.Ali said:
its mean here is not any solution of real [Q] how to fix error status 7 in samsung galaxy y
we all know about odin packages on XDA...
i think here is cygwin software issue....... its not for all
or
is this solution?
extract the boot.img and flash it via fastboot. Then perform a Full Wipe and try to flash the ROM again....
An unlocked bootloader is recommend for flashing custom Roms and kernels.
i think its solution..
Click to expand...
Click to collapse
hell_lock said:
There is a prob in ur updater script
Sent from my GT-S5360 using XDA
Click to expand...
Click to collapse
Error 7 means error in updater script. But his query isnt that. The topic heading and the question he asked is completely different.
hitme987 said:
Error 7 means error in updater script. But his query isnt that. The topic heading and the question he asked is completely different.
Click to expand...
Click to collapse
cygwin automatic generating updater script u mean its issue of cygwin...
because u r saying right "its updater script error"
E:Can't mount cache/recovery.....
pustinjak said:
Turn it on and leave it off for a day,then try again :good:
Click to expand...
Click to collapse
Hi, i istalled JellyBlastV3 on Samsung Galaxy Y and it worked perfectly fine..but then I try to install a New Kernel smthng Marvk v2.0, i dnt remember exactly..and i did smthng wrong..it got stuck in bootloops.But Then i Flash Stock ROM with Odin..and it worked pretty good.But Now i am again try to install JellyBlast V3 ..abd When IN CWm when i try to wipe data/reset & Wipe Cache Partition..I Get
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
thsese errors..Nw i dnt know what is the problem ..when i try to wipe in Android Recovery ..it just worked fine...
Please help
Yudi
[email protected]
yudibakshi said:
Hi, i istalled JellyBlastV3 on Samsung Galaxy Y and it worked perfectly fine..but then I try to install a New Kernel smthng Marvk v2.0, i dnt remember exactly..and i did smthng wrong..it got stuck in bootloops.But Then i Flash Stock ROM with Odin..and it worked pretty good.But Now i am again try to install JellyBlast V3 ..abd When IN CWm when i try to wipe data/reset & Wipe Cache Partition..I Get
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
thsese errors..Nw i dnt know what is the problem ..when i try to wipe in Android Recovery ..it just worked fine...
Please help
Yudi
[email protected]
Click to expand...
Click to collapse
Flash ur stock rom by odin or take it to servic centr if ur phone is in waranty...
Press thnx if u got ur phone working back
Hi guys,
Is there anyone can test my first cfw for S7230E ?
Links only Via PM yet,
If it works I'll make more modify
Sent from my Apple iPad 2 using Tapatalk HD
I sent firmware about 7-8 people still not answer from anyone
Waiting for 1 user
Thanks to ferloz for testing
Any idea
Boot Binary Download Start Ch[0]
Bcmboot 129.1KB OK[0.1s]
Boot2 695.9KB OK[1.0s]
Drom_dsp 65.5KB OK[0.2s]
Patch_dsp 49.4KB OK[0.2s]
Sysparm_dep 5.9KB OK[0.2s]
Sysparm_ind 71.9KB OK[0.2s]
NVRAM6 3.7KB OK[0.2s]
Wait reset !!
Download Start Ch[0]
FOTA 1363.1KB OK[1.5s]
Amss 7504.7KB OK[8.2s]
Apps 27263.0KB OK[39.4s]
ERR : NAK_INVALID_FCS 0
Error : Rsrc1 Write [0.3s]
Click to expand...
Click to collapse
The problem is .Rsrc1
Normally dump with WR then saving not flashing
If we change end.bin with Hex like wave 3 again not flashing
Any solution ?
Rsrc1 flashing now ok
Big thanks to ferrloz for testing
Now time to modify full
CFW is in progress ... As soon as I'll finish it and will share with you
Every time I try to activate wifi the following error appears in logcat:
Code:
I/WifiManager( 1421): setWifiEnabled : true
I/WifiService( 879): setWifiEnabled: true pid=1421, uid=10141
E/WifiHW ( 879): ##################### set firmware type 0 #####################
E/WifiHW ( 879): Cannot open "/data/.cid.info": No such file or directory
E/WifiHW ( 879): ==========[WIFI] Station firmware load ===========
D/SSRMv2:Monitor( 879): SIOP:: AP = 400 (read only)
E/WifiHW ( 879): return of insmod : ret = -1, No such device
E/WifiStateMachine( 879): Failed to load driver
D/WfdService( 879): intent recieved android.net.wifi.WIFI_STATE_CHANGED
D/STATUSBAR-NetworkController( 1421): onReceive() - RSSI_CHANGED_ACTION, WIFI_STATE, NETWORK_STATE
D/STATUSBAR-NetworkController( 1421): Nothing, mRoamingIconId = 0
I/elm ( 2716): MainReceiver.onReceive() : android.net.wifi.WIFI_STATE_CHANGED
E/WifiStateMachine( 879): sendErrorBroadcast code:10
E/WifiController( 879): Wi-Fi driver is unstable. Received CMD_STATEMACHINE_RESET
I/elm ( 2716): MainReceiver.onReceive() END - - - - - : android.net.wifi.WIFI_STATE_CHANGED
D/elm ( 2716): ELMEngine.getInstance().
I/DownloadNowBroadcastReceiver( 3770): onReceive
D/TMSERVER/TMNetworkReceiver( 3738): TMNetworkReceiver.TMNetworkReceiver() Enter 1 main
D/TMSERVER/TMNetworkReceiver( 3738): TMNetworkReceiver.StartTMHandler - enter
D/TMSERVER/TMNetworkReceiver( 3738): TMNetworkReceiver.StartTMHandler - exit
D/TMSERVER/TMNetworkReceiver( 3738): TMNetworkReceiver.onReceive() Enter
D/TMSERVER/TMNetworkReceiver( 3738): TMNetworkReceiver.onReceive() Action android.net.wifi.WIFI_STATE_CHANGED
D/TMSERVER/TMNetworkReceiver( 3738): TMNetworkReceiver.onReceive() UnHandled
D/TMSERVER/TMNetworkReceiver( 3738): TMNetworkReceiver.onReceive() Exit
D/MTPRx ( 4799): DRIVER_TIME_OUT 60s lapsed
and I tried all sorts of wifi fixers available in the forum without success. After some research I found the following post:
http://forum.xda-developers.com/showthread.php?t=1652702
what makes me think it's a problem with the driver.
The solution was found by this user:
I fixed this issue by copying libhardware_legacy.so from my OEM ROM to the ported ROM. Rebooted and WiFi worked just fine
Click to expand...
Click to collapse
I would like to know how to apply this solution to the GT-I9505. I must confess I do not think there is a solution to my problem, so any suggestion will be very welcome.
I am using Stock 4.3
Thanks in advance
Must have something similar I've gone 3 days without WiFi
I'll give this a go and get back to you. :good:
Edit: What a random series of events!
I looked at the line in your Logcat 'E/WifiHW ( 879): Cannot open "/data/.cid.info": No such file or directory' and when I looked I did have this file so deleted it and tried Wifi, nothing.
So I tried to replace that 'libhardware_legacy.so' file, but without thinking about it I'd taken it from a stock TW rom when I'm on a AOKP based rom. Doh!
Of course, it didn't boot and then I was left thinking "Oh ****"
I then tried flashing an old Android 4.2 rom I had on my SDCard but I did it lazily by only formatting the system and clearing Cache and Dalvik.
When I restarted it showed the boot image and then did nothing, so I went back into recovery and restored the system partition from a backup I created the other day (But whilst it was broken) of the same ROM I was on at the beginning of this post.
When it booted again it had a weird corrupted image, from my experience that's normally Kernel related, I also had a copy of KT Kernel on my SDCard, so flashed that, then wiped Cache and Dalvik
Low and behold when it finally booted, I went into settings and there was Wifi switched on and had found all my local Wifis. I got it to connect and ran some speed tests. Also restarted the phone and switched it on and off to make sure it wasn't just a fluke or hoax and now it seems I'm all sorted!
.... But for how long....
Pulse654321 said:
Must have something similar I've gone 3 days without WiFi
I'll give this a go and get back to you. :good:
Edit: What a random series of events!
I looked at the line in your Logcat 'E/WifiHW ( 879): Cannot open "/data/.cid.info": No such file or directory' and when I looked I did have this file so deleted it and tried Wifi, nothing.
So I tried to replace that 'libhardware_legacy.so' file, but without thinking about it I'd taken it from a stock TW rom when I'm on a AOKP based rom. Doh!
Of course, it didn't boot and then I was left thinking "Oh ****"
I then tried flashing an old Android 4.2 rom I had on my SDCard but I did it lazily by only formatting the system and clearing Cache and Dalvik.
When I restarted it showed the boot image and then did nothing, so I went back into recovery and restored the system partition from a backup I created the other day (But whilst it was broken) of the same ROM I was on at the beginning of this post.
When it booted again it had a weird corrupted image, from my experience that's normally Kernel related, I also had a copy of KT Kernel on my SDCard, so flashed that, then wiped Cache and Dalvik
Low and behold when it finally booted, I went into settings and there was Wifi switched on and had found all my local Wifis. I got it to connect and ran some speed tests. Also restarted the phone and switched it on and off to make sure it wasn't just a fluke or hoax and now it seems I'm all sorted!
.... But for how long....
Click to expand...
Click to collapse
You are lucky!
Can you explain the process of extract 'libhardware_legacy.so from a stock ROM and flash it on lhe device?
About lhe kernel, i Tried them all with no success.
Thank tou!
arleybarros said:
You are lucky!
Can you explain the process of extract 'libhardware_legacy.so from a stock ROM and flash it on lhe device?
About lhe kernel, i Tried them all with no success.
Thank tou!
Click to expand...
Click to collapse
Well I actually took it from a ROM that was in zip format, that you can flash in CWM so was quite easy. I've included it for you to try. It may not work the same as mine so make sure you have a backup to revert to!
And the KT kernel I used was KT-SGS4-JB4.3-AOSP-INTL-11.14.2013, but you'll need the TW version if you're on stock ROM? That version can be downloaded Here.
Pulse654321 said:
Well I actually took it from a ROM that was in zip format, that you can flash in CWM so was quite easy. I've included it for you to try. It may not work the same as mine so make sure you have a backup to revert to!
And the KT kernel I used was KT-SGS4-JB4.3-AOSP-INTL-11.14.2013, but you'll need the TW version if you're on stock ROM? That version can be downloaded Here.
Click to expand...
Click to collapse
I really appreciate the help, but this also did not work. I'm starting to think I have a hardware problem. is possible to diagnose it via ADB?
I'm thinking that I must have a problem with the permissions of folders and partitions, because the file "/ data / .cid.info" should be created automatically (if I'm not mistaken) and here, no matter what I do, this file is not available.
Could someone show me how to check the correct permissions for the folders and partitions?
Yeah that's really odd. The file is recreated for me when I was deleting it before and restarting. I'm not sure which file browser I'm using atm. 2 secs and I'll get some pictures up and the permissions for folders.
This is the file manager I'm using, should work ok. Hopefully it works with root features.
I've included pictures of permissions for folders, hopefully they help.
Whoops mis interpreted the pictures
Cat you give an example of what should be in the .cid.info?
For 4.4 goto 2'nd post
This is for JB 4.3.1
If you like me have the problem of : ( wifi + sim_card ) = wifi not working
here is the fix : credits to HTCZ715E
http://forum.xda-developers.com/showthread.php?t=2368501
but just 1 more step , after making the new "telephony-common.jar" and adb push , and chmod 644
you HAVE TO wipe dalvik+cache
without wipe dalvik+cache it never worked for me.
HTC MyTouch 4G
[ROM] CM-10.2 | AOSP 4.3 Jellybean [KANG] [Oct-11]
cm-10.2-20131011-Albinoman887-glacier
Well heads up to the android 4.4
non of the previous solutions is not working :crying:
today i tried ROM Legacy Carbon 4.4
so i started to use my knowledge about cracking from the old MS-dos ages !!!!!!!!! and i cracked the bcmdhd.ko file
using IDA dissembler and HexEdit the bcmdhd.ko file.
Now wifi works again. :good:
The problem is that , in this method i cannot provide a universal file and you have to make your own cracked driver ".ko" file.
Or the developers of each Rom should use the working source code for the wifi driver which has the complete support for all languages.
refer to this post:
http://forum.xda-developers.com/showthread.php?t=1077329
and also here are some lines from logcat (i changed my mcc , mnc and country to XX ) with the cracked driver.
(i prefer to use cracking instead of patching because it was previously we called it)
Code:
D/Tethering( 1874): Exception adding default nw to upstreamIfaceTypes: java.lang.NullPointerException
E/wpa_supplicant( 2047): wpa_driver_nl80211_driver_cmd: failed to issue private commands
E/WifiStateMachine( 1874): Failed to set country code XX
D/MccTable( 2051): updateMccMncConfiguration: mcc=XXX, mnc=XX
D/MccTable( 2051): getLocaleFromMcc to null_ir mcc=XXX
D/MccTable( 2051): getLocaleForLanguageCountry: skipping no language
D/MccTable( 2051): WIFI_COUNTRY_CODE set to ir
I/WifiService( 1874): WifiService trying to set country code to XX with persist set to true
D/MccTable( 2051): updateMccMncConfiguration updateConfig config={1.0 XXXmccXXmnc ?locale ?layoutDir ?swdp ?wdp ?hdp ?density ?lsize ?long ?orien ?uimode ?night ?touch ?keyb/?/? ?nav/? themeResource=null}
I/ActivityManager( 1874): Config changes=3 {1.0 XXXmccXXmnc en_US ldltr sw384dp w384dp h615dp 200dpi nrml long port finger -keyb/v/h tball/v s.6 themeResource=null}
The whole problem started from the "wldev_set_country" function in "C" code in a ".h" file of wifi driver.
i don't have the knowledge to manipulate the source code of the wifi driver and compile compile the ".ko" file.
This method is not for pplz who don't know about reverse engineering.
So i opened the "bcmdhd.ko" in IDA disassembler and select the ARM Architecture.
Then searched for the "wldev_set_country" function and in the disassembled code there is some Branches which should be re-routed.
for example: (these are the OP-Codes of ARM cpu)
BNE loc_206E4 in the hex view window "08-00-00-0A"
BNE = Branch if not Equal , (and must have to change to just Branch no matter what is the result of compare )
0A = BNE
EA = B (Branch)
AA = BGE (Branch if Greater or Equal)
..... and etc
The important thing is that in IDA hex-view for examaple it shows : 000206BC 08 00 00 1A
but at the bottom of window it shows: 000206F0 <= this is the address which u needs to find and change in your hex-ediotor
and in hex editor we will change that 1A to 0A
The whole process i re-route 4 branches to get success.
Also i've checked it , and there is no need to appliy the previous patch "telephony-common.jar"
Only the bcmdhd.ko driver needs to patch
I attached the cracked version of my bcmdhd.ko file.
you can try it , BUT IT MAY NOT FOR YOUR COUNTRY AND/OR YOUR SIM CARD and for sure it only works in some Roms
this is the driver version from dmesg
Dongle Host Driver, version 5.90.195.114
Compiled in drivers/net/wireless/bcmdhd on Nov 18 2013 at 17:0
Click to expand...
Click to collapse
i made the attachment for this Rom
[ROM][UNOFFICIAL] LegacyCarbon 4.4 \\ 18.11.2013 \\ Built From Source
you should unzip it and use "adb push" and "chmod 644 "
Code:
adb root
adb push bcmdhd.ko /system/lib/modules/
adb shell
su
cd /system/lib/modules/
chmod 644 bcmdhd.ko
and reboot
----------------------------------------------
HTC MyTouch 4G
[ROM][UNOFFICIAL] LegacyCarbon 4.4 \\ 18.11.2013 \\
I test this file on [ROM][Official][4.4] Evervolv Nightlies
It's compatible And works 100% :good:
BobZombiE said:
I test this file on [ROM][Official][4.4] Evervolv Nightlies
It's compatible And works 100% :good:
Click to expand...
Click to collapse
Did you use it? Bug important? I want to know some information. Thanks!
Sure , i'm using this patched driver almost on all Roms i'm testing and never had any wifi problems.
Sent from my myTouch 4G using xda app-developers app
BobZombiE said:
I test this file on [ROM][Official][4.4] Evervolv Nightlies
It's compatible And works 100% :good:
Click to expand...
Click to collapse
Camera, cam recording, and Browser? What any problem?
If I want back Rom 4.3 after install 4.4. Can I back?!
Thank so much your infomation!
hdhthed said:
Camera, cam recording, and Browser? What any problem?
If I want back Rom 4.3 after install 4.4. Can I back?!
Thank so much your infomation!
Click to expand...
Click to collapse
go to the related thread and take a look , or make a nandroid backup and try.
anyway:
Evervolv 4.0: at this moment: Camera does not work at all . but stock browser is ok :good:
Carbon 4.4 Rom : at this moment : Camera & Cam recording is ok. but stock browser does not work. u have to use other browsers like firefox
Yea! Make a nandroid backup ,after I can restore in Recovery. Have lost root?
hdhthed said:
Yea! Make a nandroid backup ,after I can restore in Recovery. Have lost root?
Click to expand...
Click to collapse
i don't think so
BobZombiE said:
i don't think so
Click to expand...
Click to collapse
Mean? You think lose root or cant restore a backup nandroid ?
hdhthed said:
Mean? You think lose root or cant restore a backup nandroid ?
Click to expand...
Click to collapse
i'm root and s=off , HBOOT 75
and flashed, backed up, restored my phone more than 100 times last week . and never lost root
This is my old phone... Fun to be back here.
I am asking about this modified driver. I need to find out first if my phone uses this driver (looks like a broadcom driver), but if it is, I am going to try it.
My question to the author is: do the changes you made make this driver location agnostic? Because you changed the BNE, to just branch, it seems that you are allowing it to function regardless of the country (in the MMC).
I have an HTC One running 4.4 and my issue is that I really need to use channel 13. My router is set to 13, but no matter what changes I make to the wi-fi region encoding (the region encoding change is successful), I still am limited to only channels 1 to 11.
So I just thought I'd ask to get your input on this...
Thanks,
Paul
help me solve my wifi issue
BobZombiE said:
For 4.4 goto 2'nd post
This is for JB 4.3.1
If you like me have the problem of : ( wifi + sim_card ) = wifi not working
here is the fix : credits to HTCZ715E
http://forum.xda-developers.com/showthread.php?t=2368501
but just 1 more step , after making the new "telephony-common.jar" and adb push , and chmod 644
you HAVE TO wipe dalvik+cache
without wipe dalvik+cache it never worked for me.
HTC MyTouch 4G
[ROM] CM-10.2 | AOSP 4.3 Jellybean [KANG] [Oct-11]
cm-10.2-20131011-Albinoman887-glacier
Click to expand...
Click to collapse
Hey guys ... I'am a normal user having sony xperia ion Lt28h .... I've just flashed CM11 unofficial rom but I have a wifi problem ..... can you teach me how to solve my regional wifi issue as I am in syria and have faced this problem earlier so i know it's a regional problem ..... thx for help
Ok . I have a galaxy s4 i9500. i installed a stock rom from russia and im having some issues. ill install another stock from vietnam but u could help me fix this one.
1. Notification Panel
some icons are missing like air gesture and some others.
I tried this: I got Sql Lite Editor -> Opened it -> clicked on settings Storage -> clicked on settings.db and then it showed me an error like this: An error occurred while opening the database. Unable to open the database file (code 14) while compiling SELECT * FROM sqllite_master WHERE type in('table', 'view') ORDER BY name
PLZ help
2. Lock screen
there is not life companion written in lock screen. So i would appreaciate if u help me fix these even though i dont think this last one is a problem
Did you do a factory reset?
Lennyz1988 said:
Did you do a factory reset?
Click to expand...
Click to collapse
When i installed the stock ROM i did all the wiping proccesses from CWM and then installed it by ODIN. Since then i ve done nothing.