Database Users

[stop-dev][TWHK][cm7][flipout-mb511-ruth][testing] status: become stable

WARNING:
This update zip use write mot_boot_mode as shell script to run bootmenu,
don't modify it. otherwise, maybe you will get stop at M logo.
NOTICE: This update zip is ONLY for mb511, if you want to update, please check your stock rom.
If you use this update zip at charm(mb502), is unstable, mb502 and mb511 still has some different.
My STOCK ROM VERSION:
Code:
RUTEM_U3_01.14.16_DEBLUR_SIGNED_USARUTH15ND0RTINT056.0R_PDS000_USARUTHEHKTWEMARA_P011_A010_HWp3_1FF.sbf
If you try to call, but can't hear sound or can't registration of the carrier network, try this ROM version to update RC version.
RC version 5: v0.7.4
configure sources
NOTICE:If you want update fix zip, you should use bootmenu to update.When boot at motologo,click click and click "vol -" to enter bootmenu.
->because bootmenu executed by mot_boot_mode, so /system can't umount, only can remount.
--and update zip have to modify updater-script, remount /system.
[2013/11/13]:
last update:
Seems we can use the command of telnetd to do emergency rescue.
I write telnetd as shell script. It's only to execute bootmenu, if someone modify mot_boot_mode maybe cause bootmenu can't execute.
The telnetd will execute by eclair's init_mapphone30_umts.rc. But it's only can use bootmenu to execute adb to do some things (ex. modify mot_boot_mode).
These days, I try using 2ndboot, but still freeze on hbootmod, I don't know why we can't execute hbootmod.
I can't find anything solution, and can't get more message.
For me, it's hard to debug, I'm not kernel developer. I try to understand the source code of hbootmod, should stuck on do_branch.
But I still can't get any idea to solve this question.
Hope someone can complete it, let we can use new kernel.
RC version 5 should can be a stable version.
[2013/10/04]:
RC version 5:
Seems when I try fix camera, has incorrect modify of sensors. Fix incorrect modify.
write shell script /etc/init.d/07cphostapconf, copy /system/etc/wifi/softap/hostapd.conf to /data/misc/wifi/hostapd.conf
modify updater-script, clear /data/dalvik-cache. if already upgraded previous version update zip, should can direct flash RC5, skip double wipe.
[2013/09/26]:
20130926.zip:
I forget modify configure sources of buttonblink.sh.
old buttonblink.sh file will get bad battery life.
[2013/09/19]:
20130919.zip:
According to this, use smartass is more stable, thanks edgarsongla.
modify init.mapphone30_umts.rc, set smartass as default and delete cpufreq_interactive.ko.
[2013/09/18]:
for traditional chinese user:
fork tcime unofficial for flipout.
upload tcime.apk for flipout.
source code
[2013/09/16]:
baseband:
use and modify cyanogenmod4milestone's configure files of mmparts.
but I'm not do full test, should be ok.
reduce reboot times:
seems wakelock cause reboot, I guess.
these steps maybe can reduce reboot times.
disable wi-fi or don't set wi-fi sleep policy at never.
disable Android debugging.
but maybe still has reboot problem. I can't find solution.
[2013/08/28]:
camera:
use and modify CyanogenKobe's configure of libcamera.
fix part of camera. Take picture is normal, solved rotation 90 degree problem. But video recorder still rotation 90 degree.
wifi:
use stock rom's files.
media:
add libraries of 720p files. but 720p still has problem.
[2013/08/15]:
fix part of magnetic sensor, tested by google map.
modify lights code. when enter standby to check notification, if exist set buttons backlight on.
and if already standby when get notification, set blink and backlight on.
delete /system/etc/init.d/99buttonblink, modify /system/xbin/buttonblink.sh(for enter standby and exist notification use).
[2013/08/08]:
seems write to Android services will get bad use of battery.
so write to /system/etc/init.d/99buttonblink, to start service (check blinking of buttons backlight).
[2013/08/01]:
fix notification blinking of buttons(menu, home and back) backlight.
[2013/07/03]:
find the way to compile tiap_drv.ko
-->if get error, try this command then reboot.
Code:
cp /system/etc/wifi/softap/hostapd.conf /data/misc/wifi/hostapd.conf
modify overlay of auto brightness and notification LED.
[2013/06/26]:
use CyanogenModXT720's libaudio.so, ril should be normal.
use CyanogenModXT720's dsp directory.
get some kernel modules from CyanogenModXT720.
-->seems tiap_drv.ko can use, but still has problem, try to fix in next version.
[2013/06/23]:
define open keyboard of orientation by overlay.
modify BoardConfig.mk.
use cyanogenmod4milestone's apns-conf.xml.
use "mka bacon" to compile cm7.
separate gapps:
-->attachments gapps.zip for bootmenu use.
can work:
camera
battd
fmradio
bluetooth
gps
sensors
usb connect
audio
half work:
video
-> 720p has problem.
wifi
->I only use 2G service, so I can't test softap.
ril
->I only use 2G service, so I can't test 3G.

use mknod to replace mv /dev/xxx
[2013/04/01]:
resume original parameter in init.mapphone30_umts.rc
->symlink /dev /dev/netmux
I don't know why I deleted it...
modify /system/bootmenu/2nd-init/init.rc:
/mnt/sdcard -> /sdcard
modify void.fstab:
/mnt/sdcard -> /sdcard
delete /system/etc/init.d/02movedevice
fix sdcard mount question.
replace files by upload zip, and delete /system/etc/init.d/02movedevice. Or wait release new version.
fix in preview version 2.

In terms of audio recorder, following information may help:
Flipout uses Sample Rate '16KHz' or "22KHz" to record sound, NOT '44KHz'. This is why flipout cannot use skype >_<. If you guys are using a recorder that uses Sample Rate "44KHz" (which almost all recorders set as default Sample Rate), you have to change the setting.

No phone to test
>.<
Sorry guy I can't help

May be I can help to fix this bugs.audio,fmradio,sensors,camera,ril&wifi,look this:https://github.com/xn-Dream/android_device_motorola_sage-1,and you can pm me else.

Seems use mb508's libaudio.so can use video(low quality,landscape orientation) and audio recorder.
-- hard decoding still problem, can use some player (like mxplayer) to play with soft decoding.
-- Spirit FM will be no sound.
-- call phone number still no sound.
[2013/04/02]:recompile cm7 with mb508's libaudio.so
Now we can hear sound from the other side , but the other side can't hear what I say .
But use speaker it's no problem.

sim unlock problem
Hi, first thanks for do this ROM :good:
I install but when start now the system want to give a sim unlock code, I was use before so do u have any idea or something that i have to do to solve this problem
Sorry for my english is not my native language
Best regards

phchshow said:
Seems use mb508's libaudio.so can use video(low quality,landscape orientation) and audio recorder.
-- hard decoding still problem, can use some player (like mxplayer) to play with soft decoding.
-- Spirit FM will be no sound.
-- call phone number still no sound.
[2013/04/02]:recompile cm7 with mb508's libaudio.so
Now we can hear sound from the other side , but the other side can't hear what I say .
But use speaker it's no problem.
Click to expand...
Click to collapse
error log
about 3G
3gw.Service 7225 Mobile Network not connected - not roaming
about codec
Error TIOMX_CORE 2045 dlopen libOMX.TI.720P.Decoder.so failed because Cannot load library: load_library[1111]: Library 'libOMX.TI.720P.Decoder.so' not found
Info TI_Video_Decoder 2045 TI Video Decoder
Error OMXCodec 2045 Profile and/or level exceed the decoder's capabilities.
Error MediaPlayer 16597 error (1, -2147483648)
Error MediaPlayer 16597 Error (1,-2147483648)
Error MX.Player.Joint 16597 1st error: what=1 extra=-2147483648
Use 508 libOMX.TI.720P.Decoder.so put into system/lib
Error OMXCodec 2048 [OMX.TI.720P.Decoder] ERROR(0x80001009, 1)

I'm impressed that you finally got it working, but i have a evil kind of Bug around here!
The Play Store vanishes every Reboot, Titanium says it is Frozen and im unable to unfreeze it.
If i can i would provide a logcat in the next hours!
Anyway, awesome to finally see 2.3.7 on MB511 ^^
//EDIT: I connected the Device with the Internet, now it is working fine ^^

everything is working except that when phone reboot version is still 2.1 and nothing changed :/

adout keylayout:
unzip keylayout.zip
--init.mapphone30_umts.rc
--init_prep_keypad.sh
to /system/bootmenu/2nd-init/
chmod 0644 /system/bootmenu/2nd-init/init.mapphone30_umts.rc
chmod 0755 /system/bootmenu/2nd-init/init_prep_keypad.sh
Integrate to fix-20130413.zip.

phchshow said:
adout keylayout:
unzip keylayout.zip
--init.mapphone30_umts.rc
--init_prep_keypad.sh
to /system/bootmenu/2nd-init/
chmod 0644 /system/bootmenu/2nd-init/init.mapphone30_umts.rc
chmod 0755 /system/bootmenu/2nd-init/init_prep_keypad.sh
Click to expand...
Click to collapse
Is This QWERTZ?

Should be QWERTY.
There are two files, ruthp0-keypad.kl and ruthp1-keypad.kl.
use this command
"cat /proc/device-tree/[email protected]/[email protected]/name"
My device get ruthp1-keypad.
If you want to use QWERTZ, you can try replace ruthp0-keypad.kl, ruthp1-keypad.kl, ruthp0-keypad.kcm.bin and ruthp1-keypad.kcm.bin.
Get from QWERTZ version.
ShockBuddy said:
Is This QWERTZ?
Click to expand...
Click to collapse

Maybe can solved Turn on USB storage problem.
Integrate to fix-20130413.zip.
if replug usb, maybe has problem, use killall com.motorola.usb to reset usb.

Hi to all,
Thanks to all that are working on this rom.
Since both models are merged in the same post because the same hardware, I wonder if I can deploy this rom into a Motorola Charm, or if I got to make changes on code, I guess at least have to change some files where refers to 511 to 512, and where refers "Ruth" to "Charm".
What other changes should I do to make this model work?
Thanx for response.

Please help
Please help me, How do i do to work because i have not service,
The problem is SIM NETWOR UNLOCK PIN
Please HELP!!!!

just the key pad related files, I was unable to compile this ROM from source using charm files, I think an update file to replace keypad files with charm should do the trick.
I shall try it and let you know.

there are so many attachments here
please put them into #1
Great job, men!

netmanmac said:
Please help me, How do i do to work because i have not service,
The problem is SIM NETWOR UNLOCK PIN
Please HELP!!!!
Click to expand...
Click to collapse
I dont have the Issue and i haven't inserted any SIM Card, it should be enough to reboot without Sim Card.
If you get to Homescreen, use a Root Explorer and edit /system/build.prop, check if
Code:
keyguard.no_require_sim=xyz
is set to "false", if it isn't in there, add it!
Hope i helped :fingers-crossed:

finally installed.is the screen orientation working good?when i flip out the keyboard the screen orientation remains protrait,pretty annoying!anyway great job,never though i'd have seen cm on flipout!love this device,unlike any other

[Q] Sim card not found in roms cm9 L3

Hi,
I´m spanish and my sim card of Tuenti Movil don´t be detected for the phone and I haven´t got web but when I introduce the sim card of movistar the phone I have web and detecte it.
When I desactive the pIn code the phone detected the sim and I have got web but I haven´t got 3G.
Help me please.
Sorry for mi bad english.
Here are photos of jellycast V6 that is a rom based on cm9

mjgs17 said:
Hi,
I´m spanish and my sim card of Tuenti Movil don´t be detected for the phone and I haven´t got web but when I introduce the sim card of movistar the phone I have web and detecte it.
When I desactive the pIn code the phone detected the sim and I have got web but I haven´t got 3G.
Help me please.
Sorry for mi bad english.
Here are photos of jellycast V6 that is a rom based on cm9
Click to expand...
Click to collapse
r u using the right baseband (check the version number in about phone eg v10k and confirm it with lg firmware website just google it )if not then U have to flash your home country's or open europe's baseband via Kdz flasher then flash the jellycast...!

Problem
drkingtech said:
r u using the right baseband (check the version number in about phone eg v10k and confirm it with lg firmware website just google it )if not then U have to flash your home country's or open europe's baseband via Kdz flasher then flash the jellycast...!
Click to expand...
Click to collapse
I test many firmwares versions, I test open europe and firmwares of spain and always I have the problem.
The problem is in all roms based on cm9.
Sorry for my bad english

mjgs17 said:
I test many firmwares versions, I test open europe and firmwares of spain and always I have the problem.
The problem is in all roms based on cm9.
Sorry for my bad english
Click to expand...
Click to collapse
seems to be a odd problem did u try crossbreeder?
(this for the 3g btw)
http://forum.xda-developers.com/showthread.php?t=2113150

Problem
drkingtech said:
seems to be a odd problem did u try crossbreeder?
(this for the 3g btw)
http://forum.xda-developers.com/showthread.php?t=2113150
Click to expand...
Click to collapse
Thanks you but I dont understand well that is the crossbreeder my level of english isnt be very well and i dont understand this.

mjgs17 said:
Thanks you but I dont understand well that is the crossbreeder my level of english isnt be very well and i dont understand this.
Click to expand...
Click to collapse
just download cross breeder installer
http://forum.xda-developers.com/attachment.php?attachmentid=2086051&d=1372770386
crossbreeder uninstaller
http://forum.xda-developers.com/attachment.php?attachmentid=2086052&d=1372770386
copy them to the sdcard
go cwm wipe cache/dalvik cache install from sdcard-select the CrossBreeder_7.2.13.zip and flash it
reboot device
open the terminal emulator and type and check the codes given on the page
1. VALIDATION and TROUBLESHOOTING:
You can check your DNS boost functionality by running the following command:
Code:
getprop net.dns1
It should report 0.0.0.0
Then to verify Adblock you can select any one host from the blocked hosts file using the command:
Code:
tail /etc/CrossBreeder/dnrd_root/master
Pick one from there and browse to it in your browser. You should get a blank space
If you're experiencing any issues with your tethering, then you can first try and disable the tethering using:
Code:
su -c /system/etc/CrossBreeder/REMOVE_TETHER_BOOST
and rebooting.
You can re-enable it with:
Code:
su -c /system/etc/CrossBreeder/INSTALL_TETHER_BOOST
and rebooting.
Similarly if you're getting any issues with browser not reaching pages etc. then you can try and disable the entire DNS speedup functionality using:
Code:
su -c /system/etc/CrossBreeder/REMOVE_DNS_CLIENT
and rebooting.
You can re-enable it with:
Code:
su -c /system/etc/CrossBreeder/INSTALL_DNS_CLIENT
and rebooting.
Also of note is the Adblock feature. CrossBreeder now uses it's own Adblock file in /etc/CrossBreeder/dnrd_root/master ( NOTE - CHANGED FROM PREVIOUS VERSION). It also serves up these blocks in a clean blank format so you don't get an ugly 'Page not found' error instead of every ad. This is quite unique. If you want to disable Adblock to save around 3 MB of RAM on low end devices, you can run the command:
Code:
su -c /system/etc/CrossBreeder/DISABLE_ADBLOCK
You can re-enable it with:
Code:
su -c /system/etc/CrossBreeder/ENABLE_ADBLOCK
The biggest improvements are in general usability of apps, both local and network based.
2. You can check your entropy values with this tool:
http://play.google.com/store/apps/de...ndentropyavail
or use this method for more fine grained graphs: http://forum.xda-developers.com/show...php?p=38509664
You should get values moving to 4000 regularly with this mod.
Also of some use is this Lag Test app: Lag Test http://db.tt/eBHYJWYn ( Thanks MW86 ). This is for generally testing the CPU based GUI rendering functionality. The aim is to approach 60 fps, but there isn't a guaranteed correlation with CrossBreeder and your FPS result as of now. It is mostly related to your Governor but CrossBreeder certainly helps.
2. If for some reason, your entropy values aren't hovering around 4096 then the app most probably didn't start automatically. You can try and run it manually using:
Code:
su -c "/system/etc/CrossBreeder/zzCrossBreeder FORCE"
If the entropy values go up to around 4096 and stay there, it's working. CrossBreeder is now in it's separate directory and not dependent on your init.d support. You can make it run automatically on boot using an app like SManager from the Play store, just remember to check both 'BOOT' and 'ROOT' for the execution.
3. If you're still getting issues, you can run the collection script:
Code:
su -c /system/etc/CrossBreeder/CHECK_PROCS
(if it hangs you can close the window and run it again) and post the resultant /data/cb_CHECK_PROCS.log file here in this thread or anywhere else and post here pointing to it please. I will try to find a solution or post a bugfix soon.
You can also disable CrossBreeder if you have any problems using:
Code:
su -c /system/etc/CrossBreeder/DISABLE_CROSSBREEDER
4. If you tried (2) and (3) above and it still doesn't work for you or you would still like to uninstall the mod, then please flash the CrossBreeder_Uninstall.zip.
Click to expand...
Click to collapse
Hope u understand...cant get clearer than this lol..!

Problem
drkingtech said:
just download cross breeder installer
http://forum.xda-developers.com/attachment.php?attachmentid=2086051&d=1372770386
crossbreeder uninstaller
http://forum.xda-developers.com/attachment.php?attachmentid=2086052&d=1372770386
copy them to the sdcard
go cwm wipe cache/dalvik cache install from sdcard-select the CrossBreeder_7.2.13.zip and flash it
reboot device
open the terminal emulator and type and check the codes given on the page
Hope u understand...cant get clearer than this lol..!
Click to expand...
Click to collapse
Thank you I understand this

[Issue] Omni 4.4 wifi can't find network

Hey guys,
I finally built omni 4.4 for Gtab2 10.1
My wifi is turned On, but can't find any network.
I used latest blobs from samsung stock rom 4.2.2 to be sure.
logcat:
http://pastebin.com/xm6un9Tg
During the build process i faced an error :
Code:
out/target/common/obj/APPS/framework-res_intermediates/src/com/android/internal/R.java
out/target/common/obj/APPS/framework-res_intermediates/src/android/R.java
expected "}"
public static final class string-array{ }
^
this is not the exact error code but it was almost this.
To bypass this error i just comented both class, i wonder if this can be related?
thanks

I'd suggest looking at other device bringup commits first.
4.4 requires wifi configuration changes and storage configuration changes.

Entropy512 said:
I'd suggest looking at other device bringup commits first.
4.4 requires wifi configuration changes and storage configuration changes.
Click to expand...
Click to collapse
mmhh still no luck.
I don't have any error message in logcat now but still scanning for network and can't find any.
I based my change on aries bring up commit.
Now my ext sdcard work if i'm root, i may need to change some permission in fstab,
and i add edit this line in init.espresso10.rc
Code:
service wpa_supplicant /system/bin/wpa_supplicant \
-Dnl80211 -iwlan0 -e/data/misc/wifi/entropy.bin [email protected]:wpa_wlan0 \
-c/data/misc/wifi/wpa_supplicant.conf -O/data/misc/wifi/sockets
and if I try to add an ssid by hand i got this error in logcat:
Code:
E/WifiConfigStore( 441): failed to set SSID: "mywifi"
E/WifiConfigStore( 441): Failed to set a network variable, removed network: 0
E/WifiStateMachine( 441): Failed to save network
thanks.

Did you add it, or change the one that was already there?

Entropy512 said:
Did you add it, or change the one that was already there?
Click to expand...
Click to collapse
I add it to try, there is no wifi network, it loop on "searching network"

I wonder if my error can be related to what i said earlier
sevenup30 said:
During the build process i faced an error :
Code:
out/target/common/obj/APPS/framework-res_intermediates/src/com/android/internal/R.java
out/target/common/obj/APPS/framework-res_intermediates/src/android/R.java
expected "{"
public static final class string-array{ }
^
this is not the exact error code but it was almost this.
To bypass this error i just comented both class, i wonder if this can be related?
thanks
Click to expand...
Click to collapse
Do you face this error while building omni? can it be because of my java version? i'm on java 6

finally got it working, it was related in init conf file like you said.
Does someone just know how can I disable hardwar keyboard at first boot?
Because of that keyboard never show up so i have to skip the first settings and disable it in language & input.

sevenup30 said:
finally got it working, it was related in init conf file like you said.
Click to expand...
Click to collapse
Could you precise which mod you did in init conf file ?
Because I've the same problem with a build for Acer A200 : loop on AP scan, no results, no possibilities to configure an AP manually....
Thanks

sevenup30 said:
finally got it working, it was related in init conf file like you said.
Does someone just know how can I disable hardwar keyboard at first boot?
Because of that keyboard never show up so i have to skip the first settings and disable it in language & input.
Click to expand...
Click to collapse
Fix or remove the broken kernel driver that's reporting a keyboard as being present when it's not.
Another possibility is you're missing KL/IDC files for some input device that is being treated as a hardware keyboard when it's not. (See the galaxys2-common family - the sii9234 or whatever it is IDC file was needed to keep that input device from being detected as a HW keyboard)

[general][Q&A][Discussions] cyanogenmod 12

Hello folks at xda
i think it's better to ask our questions that are not helping developers to make stable cm12 here,and not post spams on dev thread.
i just want to say : leave developer threads for developers.:good:
ask general questions here.so devs can focus on important things.
Download rom from this mirror link if you can't download it from mega
Also you can try Resurrection remix [Lollipop 5.0.2] [Credit : @Furrydaus]
[*]USB Charging : Ok
[*]USB ADB : Ok
[*]USB MTP : Ok
[*]Video : Ok
[*]Audio : Ok
[*]Sensors : Ok
[*]Screen rotation : Ok
[*]WLAN : Ok
[*]Wifi hotspot : seems to be working ( Fix! [credit : @MrSteve555] )
[*]GPS : Ok
[*]GSM : Ok
[*]GSM Data : (Fix! [credit : @Sylvester lobo] || or this => A comprehensive Mobile Data fix)
[*]GSM Voice : Ok ( Fix! [credit : @MrSteve555] )
[*]GSM SMS : OK
[*]Bluetooth : Ok
[*]NFC : Ok
[*]Camera : Ok
[*]FM Radio : Not work
[*]Keyboard : Ok
[*]MHL : Not tested
[*]OTG : Ok ( this post )
[*]VPN : Doesn't work
[*]...

How to install cm12 (mrsteve) on sp . by @[SIZE="5"]Dammer Martins[/SIZE]
Small tutorial for instalation of the steves build with working camera and wifi:
1-Download the ROM , ramdix fix, stock kernel and root fix
2-Open the ROM zip an push the ramdisk fiz in to system/bin folder
3-Now, put the ROM zip fixed, stock kernel and the root fix in your sdcard
4-Reboot in recovery, wipe data, cache and dalvik cache
5-Install the ROM, the stock kernel and then the root fix
6-Now reboot the system and wait the phone boot up (this take a veeery long time, trust me )
Tips: don't flash the gapps with the ROM instalation and disable the adaptive brightness to make the auto reboots stop.
Click to expand...
Click to collapse

Fix hot reboots by turning off adaptive brightness(settings->display->adaptive brightness)
Fix connectivity problem on CM12.by @noahvt
Hello,
Finally a fix has arrived for android 5.0 which will allow wi-fi data, outgoing calls, ... to work again
Steps:
1: Make sure your device is running android 5.0 by mrsteve555: http://forum.xda-developers.com/xper...8#post56946968
2: root the device by flashing this file: http://download.chainfire.eu/589/Sup...erSU-v2.16.zip
3: Reboot your device and open up terminal emulator
4: type su, press enter and give it root acces
5: type setenforce 0 and press enter
6: WAIT untill the device asks you to enter your sim pin (this means that it worked)
7: turn on wi-fi (it might take a little long to turn on wi-fi though)
8: that's it
9: well not yet there is one step you can do to make it easier to change the selinux state, Download and install this app:https://play.google.com/store/apps/d....selinux&hl=en
10: again make sure your device is rooted
11: open the app and now you can switch between permissive (this mode is the one that fixed the issues) and enforcing (default mode: wi-fi, ... don't work on this mode)
FAQ:
What is not affected (what doesn't work): The camera (can't connect to camera or hot reboot when launching camera app), more?
What is affected (what is fixed): WI-FI, Data (LTE too) Outgoing calls, more?
Do i have to do this everytime i boot my device: Yes for now you do
On what build does it run: mrsteve555's build, there were 2 reports of it not working on bagy's build
Credits:
Mrsteve555 and bagyusz for the amazing rom
Click to expand...
Click to collapse
just update titanium backup to latest version in case of super user access error.like this : can't aquire root provileges....this attemtp was made using the "/system/xbin/su" command.
Fix wifi hotspot => credit : MrSteve555
setup zram in android 5[credit : Mrsteve555]
Code:
#!/system/bin/sh
sleep 30
echo xM > /sys/block/zram0/disksize
mkswap /dev/block/zram0
swapon /dev/block/zram0
Replace x with your desired value(in MB)
And zram doesn't make phone "much faster", it just allows more multitasking while slowing the phone a bit.
Click to expand...
Click to collapse
fix sdcard mount problem [credit : Mrsteve555]
Code:
su
depmod
rmmod texfat
modprobe exfat_core
modprobe exfat_fs
These commands will try to load different exfat modules, I didn't test it myself, though.
Click to expand...
Click to collapse
Fix for unresponsive touch screen[credit : Mrsteve555]
Code:
#!/system/bin/sh
echo 20 > /sys/devices/i2c-3/3-0024/main_ttsp_core.cyttsp4_i2c_adapter/finger_threshold
chmod 666 /sys/devices/i2c-3/3-0024/main_ttsp_core.cyttsp4_i2c_adapter/signal_disparity
echo 0 > /sys/devices/i2c-3/3-0024/main_ttsp_core.cyttsp4_i2c_adapter/signal_disparity
Fix for music file not playing when you uncheck nuplayer in developer options
The solution to that will be installing viper audio. There is a different version for lollipop. You have to flash 3 zips. They need nuplayer off so you can play music and videos easily with nuplayer off
Click to expand...
Click to collapse
Download from this post [Thanks@pranavthombare]

r 3

and-roid007 said:
Fix hot reboots by turning off adaptive brightness(settings->display->adaptive brightness)
Fix connectivity problem on CM12.by @noahvt
Click to expand...
Click to collapse
Really thks ;D

Youve stated that GSM voice hasnt been tested - This is voice calls. Are they working on MrSteves build with the latest fixes or not as there seems to be mixed reports.
---------- Post added at 02:54 PM ---------- Previous post was at 02:52 PM ----------
Also your link to the https://play.google.com/store/apps/d....selinux&hl=en doesnt work
I assume its this app? https://play.google.com/store/apps/details?id=com.mrbimc.selinux&hl=en_GB

and-roid007 said:
Fix hot reboots by turning off adaptive brightness(settings->display->adaptive brightness)
Fix connectivity problem on CM12.by @noahvt
Click to expand...
Click to collapse
The fix isn't working for me

@Oblox
you are right about both.corrected

Sorry the pin code doesn't apear because i don't have set any pin code ... IM REALLYYYYYYY NOOOOOB! xD
Edit: But i can't send call, i recieve

bobslesbricoleurs said:
Sorry the pin code doesn't apear because i don't have set any pin code ... IM REALLYYYYYYY NOOOOOB! xD
Edit: But i can't send call, i recieve
Click to expand...
Click to collapse
just open terminal : type su-> type setenforce 0,hit enter.if no dialog appears dont worry,it's ok.
go to settings-> about phone-> make sure that SELinux status = premissive.
see the bug list :
GSM Voice : doesn't works (Only can recieve calls)
Click to expand...
Click to collapse

and-roid007 said:
How to install cm12 (mrsteve) on sp . by @Dammer Martins
Click to expand...
Click to collapse
What's the problem if I flash GApps with the ROM?

sohan3421 said:
What's the problem if I flash GApps with the ROM?
Click to expand...
Click to collapse
The problem will occur if you do this on first flash as itll take a lot longer to boot and the auto brightness forced reboot will kick in before it finishes. Once system is in and auto brightness disabled then install gapps.

No new about calls?
Sent from my Xperia SP using XDA Premium 4 mobile app

Navigation bar and Pie controls
I know when I moved from 4.4 to 5.0 most things that I could get from xposed or custom roms were gone such as pie controls. I've been looking around for ages and I've managed to remove navigation bar using build.prop and adding a highly customizable pie controls app. If anyone wants a tutorial made to hide navigation bar and get pie controls just ask and ill do it

Pie
Keep Pie In Memory​
1. Search root explorer in Google play 3rd one down.
2. Open it and press mount R/W ( top of app)
3. Go into root directory and open the folder data.
4. Create new file and name it local.prop
5. Long hold the newly created app and press open in text editor.
6. Add com.android.lmt
This is to prevent android removing the service from memory when it is low.
Remove Navigation Bar​
1. Open build.prop located on /system
2. Add qemu.hw .mainkeys = 1 Remember to add a space between either side of the equals or it won't work
3.Do not reboot until you have downloaded LMT launcher
Add Pie Controls​
LMT Launcher ( PIe Controls (Not an actual launcher like nova or apex its just called that) )
1. Download the latest apk from here http://forum.xda-developers.com/showthread.php?t=1330150
2. Open the app make sure autostart is selected
3. Swipe right until you get to Pie.
4.Use these settings ( navigate to the screenshots) it will get rid of the unneeded two extra slots of pie controls
Finally Reboot
If you have titanium backup convert lmt launcher into a system app to integrate the pie controls more into the system

and-roid007 said:
How to install cm12 (mrsteve) on sp . by @[SIZE="5"]Dammer Martins[/SIZE]
Click to expand...
Click to collapse
Why should I add ramdisk fix?

sohan3421 said:
Why should I add ramdisk fix?
Click to expand...
Click to collapse
Why not?
Because the ramdisk inside the zip is either corrupt or incomplete, resulting in bootloop if flashed.

sohan3421 said:
Why should I add ramdisk fix?
Click to expand...
Click to collapse
Coz it'll go in a bootloop if you don't and then clog this thread too, by begging for a link and a guide which was clearly given and posted by many users.

gapps working fine?

shahrukhqasim said:
gapps working fine?
Click to expand...
Click to collapse
yes.i think

[unofficial][linux3.4][native][tarchive][multirom]ArchLinuxARM release for N7 2013

This is not an Android project so I don't feel that posting it in the Android Development forum would be appropriate.
ArchLinuxARM for the flo (2013 Nexus 7) - Native Boot with MultiROM
This is only tested on the Wi-Fi version. With a kernel swap, it should work on the deb (LTE) tablet, though mobile data is highly unlikely to work.
Big thanks to crondog at github for the initial porting work. https://github.com/crondog/arch-flo
Working:
3D Acceleration (OpenGL ES 3.0, Mesa) - can be unstable, however.
Wi-Fi (with NetworkManager)
Bluetooth
Audio
Installation
MultiROM must already be installed, and you must already have a hardboot-capable kernel installed as well.
You will need a Terminal Emulator or ADB Shell to install.
This assumes that arch_flo_20141210_multirom.tar.gz is in the root of your internal storage (/data/media/0).
Code:
su
tar -C /data/media/0/multirom/roms -xpzvf /data/media/0/arch_flo_20141210_multirom.tar.gz
Logging in
The username is "arch" and the password is "archlinux". Change the password ASAP.
For root, the username is "root" and the password is also "root". CHANGE THE PASSWORD ASAP!
You'll probably want to enable the On-Screen Keyboard (onboard) and set your Session to "MATE" up in the top right corner.
Downloads
MultiROM hierarchy tarchive: https://drive.google.com/file/d/0B4WUjKii92l2X1F1LVhsaG5DbUE/view?usp=sharing
Kernel Source: https://github.com/willcast/kernel_flo
Also available for:
Samsung Galaxy S III LTE: http://forum.xda-developers.com/gal...unofficial-port-archlinuxarm-release-t2969290
HP TouchPad: http://forum.xda-developers.com/hp-touchpad/other/unofficial-archlinuxarm-release-hp-t2969310
Nexus 10: http://forum.xda-developers.com/nexus-10/general/unofficial-archlinuxarm-release-nexus-10-t2969450
HTC HD2: http://forum.xda-developers.com/hd2-ubuntu/development/unofficial-archlinuxarm-htc-hd2-t2970483

looks interesting will give it a crack and see how it goes

thanks for the work. it boots impressingly fast.
castrwilliam said:
You'll probably want to enable the On-Screen Keyboard (onboard) and set your Session to "MATE" up in the top right corner.
Click to expand...
Click to collapse
if I activate the onboard keyboard ist shows at the bottom of the login screen. login works without password. when beeing logged in the keyboard is gone. I can see the keyboard symbol on the left besinde the speaker symbol but tapping on it doesn't trigger anything. also changing any options in the control center -> onboard settings have no effects. logging in without keyboard activated and then control center -> onboard settings has no effects either.
I cannot "adb shell" due to lack of permissions
Code:
# adb devices
List of devices attached
???????????? no permissions
and I'm not owning a bluetooth keyboard. so right now I can only play minesweeper - oh wait, it's not installed...

is there any way to rotate the screen as its really annoying having it in portrait all the time

Toby0897 said:
is there any way to rotate the screen as its really annoying having it in portrait all the time
Click to expand...
Click to collapse
Yeah it is in the monitor options but it's worthless since Xorg crashes when changing the rotation

Great stuff!
I would remove the KDE plasma etc packages as that desktop seemed to unusable. (Due to broken hw acceleration?).
what's next?

Hi, I'm having a big trouble...
While I'm trying to do the installation (by adb shell or terminal emulator, both of them) and I enter the command posted in the OP it says:
127|[email protected]:/ # tar -C /data/media/0/multirom/roms -xpzvf /data/media/0/arch_flo_20141210_multirom.tar.gz
tmp-mksh: tar: not found
What can I do to resolve this error? I really would like to install it on my Nexus 7
Thanks in advance!

hugomc92 said:
Hi, I'm having a big trouble...
While I'm trying to do the installation (by adb shell or terminal emulator, both of them) and I enter the command posted in the OP it says:
127|[email protected]:/ # tar -C /data/media/0/multirom/roms -xpzvf /data/media/0/arch_flo_20141210_multirom.tar.gz
tmp-mksh: tar: not found
What can I do to resolve this error? I really would like to install it on my Nexus 7
Thanks in advance!
Click to expand...
Click to collapse
You will need to install busybox for tar to work

daringblaze said:
You will need to install busybox for tar to work
Click to expand...
Click to collapse
Thank you very much!! That make tar to work!!
Gonna try archLinux ASAP!!
Thanks!

updates
Hi, great stuff!
After installing it, I tried to update arch (
Code:
sudo pacman -Syu
) but this resulted in a blank screen upon boot. I assume that this is due to updated packages overwriting parts of the OS that were installed manually, but I don't know what or where. Would you have any ideas of what packages would be responsible for this, so that I know not to upgrade them?
Thanks!

computer-whisperer said:
this resulted in a blank screen upon boot. I assume that this is due to updated packages overwriting parts of the OS that were installed manually, but I don't know what or where. Would you have any ideas of what packages would be responsible for this, so that I know not to upgrade them?
Thanks!
Click to expand...
Click to collapse
Make sure you ignore xorg and mesa stuff. Add
Code:
IgnorePkg = glu mesa mesa-dri mesa-libgl xorg-server-common xorg-server-devel xorg-fonts-misc xproto libdrm
IgnoreGroup = xorg
to /etc/pacman.conf.
The list probably contains some extra entries, but works for me

It took xda 2 years, but they finally did it.
In all seriousness, props to you. I've been waiting for this for along time.

castrwilliam said:
Downloads
MultiROM hierarchy tarchive: https://drive.google.com/......
Click to expand...
Click to collapse
Hi castrwilliam, would you mind sharing what step you went through to create arch_flo_20141210_multirom.tar.gz ?

Great work guys! I was looking for this for a really long time and i am writing this on my n7 with linux but i have a few questions:
1. is it possible to overclock(and how) because my n7 runs on 1.89ghz and 477mhz gpu in android with elementalx kernel and it would be nice to have some more power
2. can the screen be rotated so the hardware buttons are on top (i saw a post saying it chrashes but i cant even find the setting xD) because it would be alot easier to use the OTG cable
And thank you guys for making this happen, i love linux on the note 10.1 and im so glad to have this run it too(would be maaad if it can be overclocked )

Thank you for this wonderful package!
I recently updated all packages ) and iam trying to fix the issue without reinstall (challenge accepted)
It seems that the xorg-server 1.17 is the problem. I compiled. Freedreno and the freedreno mesa 10.3 and libdrn packages without success. The xserver is segfaulting when it loads libexa.so.
Now i try to downgrade to 1.16 . ive read that the xf86-video-freedreno-git package is not working with flo. Is that correct? Did youbuild this packages with modificationa?
I believe this is why i love arch. Its like lego for nerds or something

castrwilliam said:
This is not an Android project so I don't feel that posting it in the Android Development forum would be appropriate.
ArchLinuxARM for the flo (2013 Nexus 7) - Native Boot with MultiROM
This is only tested on the Wi-Fi version. With a kernel swap, it should work on the deb (LTE) tablet, though mobile data is highly unlikely to work.
Big thanks to crondog at github for the initial porting work. https://github.com/crondog/arch-flo
Working:
3D Acceleration (OpenGL ES 3.0, Mesa) - can be unstable, however.
Wi-Fi (with NetworkManager)
Bluetooth
Audio
Installation
MultiROM must already be installed, and you must already have a hardboot-capable kernel installed as well.
You will need a Terminal Emulator or ADB Shell to install.
This assumes that arch_flo_20141210_multirom.tar.gz is in the root of your internal storage (/data/media/0).
Code:
su
tar -C /data/media/0/multirom/roms -xpzvf /data/media/0/arch_flo_20141210_multirom.tar.gz
Logging in
The username is "arch" and the password is "archlinux". Change the password ASAP.
For root, the username is "root" and the password is also "root". CHANGE THE PASSWORD ASAP!
You'll probably want to enable the On-Screen Keyboard (onboard) and set your Session to "MATE" up in the top right corner.
Downloads
MultiROM hierarchy tarchive: https://drive.google.com/file/d/0B4WUjKii92l2X1F1LVhsaG5DbUE/view?usp=sharing
Kernel Source: https://github.com/willcast/kernel_flo
Also available for:
Samsung Galaxy S III LTE: http://forum.xda-developers.com/gal...unofficial-port-archlinuxarm-release-t2969290
HP TouchPad: http://forum.xda-developers.com/hp-touchpad/other/unofficial-archlinuxarm-release-hp-t2969310
Nexus 10: http://forum.xda-developers.com/nexus-10/general/unofficial-archlinuxarm-release-nexus-10-t2969450
HTC HD2: http://forum.xda-developers.com/hd2-ubuntu/development/unofficial-archlinuxarm-htc-hd2-t2970483
Click to expand...
Click to collapse
What's NOT working

Hello, is there some instruction howto run (native) arch on nexus 4? I see only for n7, n10...

castrwilliam said:
This is not an Android project so I don't feel that posting it in the Android Development forum would be appropriate.
ArchLinuxARM for the flo (2013 Nexus 7) - Native Boot with MultiROM
This is only tested on the Wi-Fi version. With a kernel swap, it should work on the deb (LTE) tablet, though mobile data is highly unlikely to work.
Big thanks to crondog at github for the initial porting work. https://github.com/crondog/arch-flo
Working:
3D Acceleration (OpenGL ES 3.0, Mesa) - can be unstable, however.
Wi-Fi (with NetworkManager)
Bluetooth
Audio
Installation
MultiROM must already be installed, and you must already have a hardboot-capable kernel installed as well.
You will need a Terminal Emulator or ADB Shell to install.
This assumes that arch_flo_20141210_multirom.tar.gz is in the root of your internal storage (/data/media/0).
Code:
su
tar -C /data/media/0/multirom/roms -xpzvf /data/media/0/arch_flo_20141210_multirom.tar.gz
Logging in
The username is "arch" and the password is "archlinux". Change the password ASAP.
For root, the username is "root" and the password is also "root". CHANGE THE PASSWORD ASAP!
You'll probably want to enable the On-Screen Keyboard (onboard) and set your Session to "MATE" up in the top right corner.
Downloads
MultiROM hierarchy tarchive: https://drive.google.com/file/d/0B4WUjKii92l2X1F1LVhsaG5DbUE/view?usp=sharing
Kernel Source: https://github.com/willcast/kernel_flo
Also available for:
Samsung Galaxy S III LTE: http://forum.xda-developers.com/gal...unofficial-port-archlinuxarm-release-t2969290
HP TouchPad: http://forum.xda-developers.com/hp-touchpad/other/unofficial-archlinuxarm-release-hp-t2969310
Nexus 10: http://forum.xda-developers.com/nexus-10/general/unofficial-archlinuxarm-release-nexus-10-t2969450
HTC HD2: http://forum.xda-developers.com/hd2-ubuntu/development/unofficial-archlinuxarm-htc-hd2-t2970483
Click to expand...
Click to collapse
Having my favourite distro on my pocket is very exciting so thank you very much...
I have to carry only a development lamp server so using a pacman tip I revert to a base, base-devel system removing everything about xorg and DE.
Now I connect using ssh but I've noticed that the tablet screen is simply blank: no tty, no text console.
There is a way to have a text only console at boot to make a login (may be using an usb keyboard) when device is not connected?

Hello, I have some trouble when I boot.
config: rastapop 5.1.1 (AOSP based) + last multirom v32A + Kernel w/ kexec-hardboot patch (Stock 5.1.1)
Installing archlinux correctly from the terminal emulator. Load it --> black screen (about 6seconds) --> Google Logo forever
Someone know what I can do for make it work ?

Cool I will give it a try.