Related
CM10.2 for Canadian Samsung Galaxy S2 HD LTE (SGH-I757M)
Code:
[COLOR="red"][B][SIZE="4"]*** Disclamer ***[/SIZE][/B]
THIS ROM IS FOR THE CANADIAN SGH-I757M ONLY... DO NOT FLASH IT ON ANOTHER DEVICE!
By flashing this ROM, you are voiding your phones warranty (Unless you return it
to complete stock which is possible, but beyond the scope of this thread). You
also agree that I will in no way be held responsible in the event that your
device becomes bricked (Not likely to happen). In addition, you are responsible
to take the necessary backups of your apps, data, sms, contacts, calendar events, etc.
If you agree, then please continue on ;)[/COLOR]
Code:
[COLOR="red"][B][SIZE="4"]*** NEW RECOVERY REQUIRED ***[/SIZE][/B]
Due to the addition of user control in CM10.1/CM10.2, you are required to update
your recovery to a supported recovery. As of this writing, the latest available
version is CWM6.0.3.9/Philz5.18.4 for the SGH-I757M.
If you flash the new ROM with the old incompatible recovery, you risk loosing
your sdcard under a bunch of subfolders.[/COLOR]
Code:
[COLOR="red"][B][SIZE="4"]*** NEW RADIO FIRMWARE REQUIRED ***[/SIZE][/B]
As of CM10.1, ICS radios (I757MUGLH2) are no longer supported. You must download the new JB radios (I757MUGMC5).[/COLOR]
Introduction
It's finally here :-D CM10.2 (Android4.3.x) for the Bell Canada Samsung Galaxy S2 HD LTE (SGH-I757M). Among the most notable new features are new adreno graphics drivers with triple buffering (this is project butter). More desired may be the new privacy manager features that allow you to control, on a per app basis, which information you wish to share. Other improvements include an improved lockscreen cLock and a new integrated Superuser.
Click to expand...
Click to collapse
Images
SEE SCREENSHOTS TAB AT THE TOP OF THIS PAGE.
Click to expand...
Click to collapse
What Works
* Phone
* Wi-Fi
* Mobile
* GPS
* Bluetooth
* SMS/MMS
* Data Usage
* Camera/Camcorder
* BLN Notification (Enabled in Advanced Device Settings)
* VM Notification
* Youtube Overlays
* init.d is fully supported
Click to expand...
Click to collapse
What Doesn't Work
* I experienced an incompatibility with some of my existing mp4 media files and when gallery tries to load them they cause a soft reboot. Loading these videos into the gallery media player using a 3rd party file manager seems to work without issue, it is the loading of the preview in gallery that causes the phone to crash.
Solution: The solution is to use a file manager to move the mp4 files to a new directory and add a ".nomedia" file to that directory so that when browsing photos in the gallery, it does not try to load the offending mp4 files.
* When unlocking the screen, sometimes only the capacitative buttons light up, and the screen doesn't come on. This seems to happen about 80% of the time.
Solution: This can be fixed by locking the screen, then unlocking it again. In about 5% of these cases the screen does not come on again. Just repeat the steps again until it does.
This has been fixed as of build 20131029
* You may notice a screen flicker when you first flash this ROM. This is due to a bug where the system can't decide whether to render the graphics with the cpu or the gpu, thus the flicker.
Solution: This is fixed by turning on Settings -> Developer Options -> Disable HW Overlays (You must first enable Developer Options by pressing 7 times on Settings -> About Phone -> Build Number). This will be reset on every boot. if you install Universal Init.d, my 91fixoverlays script will run on each boot and fix this automatically.
This has been fixed as of build 20131029
Click to expand...
Click to collapse
Pre-Installation instructions
1) Download to your sdcard, the new CWM6.0.3.9 flashable zip which is compatible with CM10.1/CM10.2
2) Enter your existing CWM Recovery
3) Install Zip From sdcard
4) Select the CWM_RECOVERY_6.0.3.9_I757M_20131005.zip that you downloaded to your sdcard
5) Flash the new Recovery
6) Go back to the main recovery menu and go Advanced -> Reboot Recovery (This might not actually reboot you into recovery, you may have to do that manually by turning off phone and using 3-button combo)
Click to expand...
Click to collapse
Now that you have the new recovery flashed to your device, you can continue to install this ROM.
Please be aware that the new recovery detects your sdcards (internal/external) in a different way. Your internal sdcard is recognized as /storage/sdcard0 and your external sdcard is recognized as /storage/sdcard1.
Installation instructions
1) Download the Rom and Gapps (Use only the Gapps downloded from this thread. It is customized due to our small cache partition)
2) Enter CWM
3) TAKE A NANDROID BACKUP
4) Wipe Data/Factory Reset
5) Format Cache
6) Advanced -> Format Dalvik Cache
7) Mounts and Storage -> Format /data,/cache and /system (Required for a clean flash)
8) Flash the Radios
9) Flash the ROM
10) Flash the Gapps
11) Reboot Phone
Click to expand...
Click to collapse
NOTE: If you are using Philz Touch/Advanced Recovery, you can replace steps 5 - 7 by selecting the "Clean to install a new ROM" option.
Download
ROM Downloads
Build: 20140224 (Latest)
ROM: cm-10.2-20140224-UNOFFICIAL-celoxhd.zip (185.4MB)
GAPPS: gapps-jb-20140224-signed.zip (106.5MB)
JB Radios: JB_modem_I757MUGMC5-flash_this_in_CWM.zip (21.3MB)
NOTE: A dirty flash should work for upgrading , but a clean flash is highly recommended
Build: 20140120
ROM: cm-10.2-20140120-UNOFFICIAL-celoxhd.zip (185.4MB)
GAPPS: gapps-jb-20131231-signed.zip (103.8MB)
JB Radios: JB_modem_I757MUGMC5-flash_this_in_CWM.zip (21.3MB)
Recovery Downloads
NEW CWM6.0.3.9 compatible with CM10.1/CM10.2
CWM_RECOVERY_6.0.3.9_I757M_20131005.zip (7.6MB)
NEW Philz Advanced Recovery 5.18.4 (CWM 6.0.4.4) compatible with CM10.1/CM10.2
PhilzAdvancedRecovery5.18.4-CWM6.0.4.4-SGH-I757M.zip (9.5MB)
NEW *** RECOMMENDED *** Philz Touch Recovery 6 (CWM 6.0.4.5) compatible with CM10.1/CM10.2/CM11.0
[celoxhd][SGH-I757M][CWM Advanced Edition] PhilZ Touch
* The downloads can also be found here on XDA. Use the "Download" tab at the top of the page to access both direct download or torrent download of this ROM.
Click to expand...
Click to collapse
Tips and Tricks
Checkout the second post for some tips and tricks on setting up the ROM.
Click to expand...
Click to collapse
Changelog
Code:
[B]December 23, 2013 - Build 20131223[/B]
* Revert build.prop to use dyn instead of gpu (less problems)
* Added back 91fixoverlays to /system/etc/init.d to disable hw overlays and fix screen flicker on boot
* Re-worked 91fixoverlays script so that it now runs in it's own shell to stop it from blocking other startup scripts and causing a laggy boot
* Fixed up device tree code including adding the correct definitions for boot animation size and update to the build fingerprint
* Synced latest changes from CyanogenMod
[B]December 1, 2013 - Build 20131201[/B]
* Force gpu rendering in build.prop
* Improve fix for screen on delay
* Synced latest changes from CyanogenMod
* Updated GAPPS
[B]October 29, 2013 - Build 20131029[/B]
* Tweaked build.prop to fix screen flicker and notification drawer lockup
* Fixed screen unlock bug - [URL="https://github.com/titanic-fanatic/android_kernel_samsung_msm8660-common/commit/5e163ff0c5d90a4518cbc9e14c86dceec095c70a"]Commit 5e163ff0c5d90a4518cbc9e14c86dceec095c70a[/URL]
* Added SmartAssV2 Governor - [URL="https://github.com/titanic-fanatic/android_kernel_samsung_msm8660-common/commit/511e45206bb9a1454a0c43b3d626749c1fa2c241"]Commit 511e45206bb9a1454a0c43b3d626749c1fa2c241[/URL]
* Added Adaptive Governor - [URL="https://github.com/titanic-fanatic/android_kernel_samsung_msm8660-common/commit/7f40cc5808bad6dafc6b351b93b3d0ccbd0777a6"]Commit 7f40cc5808bad6dafc6b351b93b3d0ccbd0777a6[/URL]
* Added Lagfree Governor - [URL="https://github.com/titanic-fanatic/android_kernel_samsung_msm8660-common/commit/d1392017601d27303fbce9da18d2af718e7e1a65"]Commit d1392017601d27303fbce9da18d2af718e7e1a65[/URL]
* Restore Advanced Device Settings - [URL="https://github.com/titanic-fanatic/android_device_samsung_msm8660-common/commit/3126c17c6165c7d96abde4cd7459769e165aa195"]Commit 3126c17c6165c7d96abde4cd7459769e165aa195[/URL] / [URL="https://github.com/titanic-fanatic/android_packages_apps_Settings/commit/9031ffb1f4e4185f397724a27e3d75afe7fd67e4"]Commit 9031ffb1f4e4185f397724a27e3d75afe7fd67e4[/URL]
[B]October 5, 2013 - Build 20131003[/B]
* Initial release
Click to expand...
Click to collapse
FAQ
Q. How do I install SuperSu?
A. Install the latest version from the market, and also make sure you have Universal Init.d installed and active. Then open SuperSU and when it asks you to update the superuser binary, answer yes and make sure you select the "TWRP/CWM" method. This will reboot your phone into receovery where the superuser binary will be updated and the su daemon script added. When your phone reboots, recovery will warn you that your device may possibly be unrooted. This is because of the install-recovery.sh script that is required to start the superuser daemon which allows SuperSu to manage superuser permissions. You are not unrooted ;-)
If your having difficulties getting SuperSu installed, try downloading the flashable zip and manually flashing it to your phone.
UPDATE-SuperSU-v1.65.zip
* Thanks to @formercontra for this tip *
* Make sure this is the way in which you want to manage superuser permissions as I have not yet found a way to revert to the integrated superuser without having to re-flash the rom
Q. How do I access Developer Options?
A. Go to Settings -> About Phone and scroll to the bottom. Press the Build number 7 times to activate the Developer Options.
Q. Why is my screen flickering?
A. There is a bug in this ROM where the board can't decide whether to display the frames with the cpu or the gpu, thus the flickering while it resolves the issue. To fix it, disable HW Overlays in Developer Options. This needs to be set on every boot unless you are running Universal Init.d and my 91fixoverlays script is present in the /system/etc/init.d folder.
Q. When I unlock my screen, my menu/home/back/search buttons come on but the screen is black?
A. This is a known bug in this ROM and is on the list of things that need to be fixed. For now, when this happens, just lock the screen, then unlock it again and the display should come back. If it does not, repeat until it does (the most number of times i had to do that was 3).
Q. I was browsing my pictures/videos in the gallery and my phone rebooted?
A. This seems to be caused by the gallery trying to generate a preview from the first frame of an mp4 created on older versions. Simply move the mp4's to a different directory with a file manager and add a ".nomedia" file to the folder to stop the gallery from trying to scan them. To open them, open with a filemanager and then select the gallery media player and it will play without issue.
Click to expand...
Click to collapse
Thanks To/Credits
Code:
* CyanogenMod Team - ROM Base
Without all of the hard work and efforts of the CyanogenMod team, this ROM would not be possible, so we owe them our thanks for providing us with such excellent ROMs.
In addition, I have received a lot of help on my journey to understand and be able to develop for the android platform, so I owe the following people my thanks for helping me to make this ROM possible.
* [user=673068]@dsixda[/user] - Initial port of CM9/CM10 for SGH-I757M
* [user=4974935]@Strange Peer[/user] - Continued development of CM10
* [user=3478918]@rukusx7[/user] - Contributor
* [user=4435341]@bijon440[/user] - Contributor
* [user=4036181]@kj2112[/user] - Contributor
* [user=5077807]@Tronith[/user] - Contributor
* [user=3651088]@Zippy Dufus[/user] - Contributor
* @formercontra - Contributor
Thanks guys you've all been so awesome to work with ;)
One last group of people to thank. It's YOU! Without all of you guys and girls who come to download our creations, there would be no reward for doing this. Thank you for downloading, providing feedback and being part of this small family. You are all appreciated ;)
XDA:DevDB Information
UNOFFICIAL CM10.2 For Bell SGH-I757M, a ROM for the Samsung Galaxy S II
Contributors
titanic_fanatic
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.0.x
ROM Firmware Required: SGH-I757M
Based On: CyanogenMod
Version Information
Status: Alpha
Created 2013-10-05
Last Updated 2014-02-23
Reserved
Tips and Tricks
Use the Bell Flex APN. You can select it by going to:
Settings -> Wireless & Networks -> More -> Mobile Networks -> Access Point Names
This helps fix some issues with VPN and some other system services.
Logcat what is it and how do I get one?
A logcat is the system log of events that occur on your device. This log provides the developers with some useful information pertaining to crashes and other bugs you may encounter while using the ROM and/or apps running on the ROM. Getting a logcat is generally a very simple thing. Just open your terminal emulator on your phone and type the following commands without typing the $ as it denotes a command on the command line:
$ su
$ logcat -v long > /sdcard/logcat.txt
Click to expand...
Click to collapse
The first command above will ask you to grant superuser permission to the terminal emulator which you must accept. The second command will create a file at the root of your sdcard called logcat.txt and then start writing the logs to this file. Since the logcat is a continuous function, your terminal emulator will not return you to the command prompt after the second command as it will continue to write logs until you stop it by pressing the x to close the emulator.
If you are experiencing an issue with an app, then you need to do the steps above to get the logcat recording, then press your home button so that you don't close the emulator, but put it in the background. Then you do the action that causes the bug to occur and then open the emulator and terminate it to stop the log from writing. this ensures that the error is located somewhere around the end of the log and makes it easier for us to spot
What is dalvik-cache and why do I need it?
To explain dalvik cache, you must understand how an app is pieced together. An apk (android app) is like a zip file and contains a bunch of files inside. Two important files to note are the resources.arsc and the classes.dex files. They are compiled versions of the resources (images, sounds, xml files) and classes (source code files) of the app. When android boots into a ROM for the first time, and everytime you install an app, the system performs an optimization called dex optimization which means that is pulls the dex file out of the app and places it into what is called your dalvik cache. The system can then pre-load these dex files and allow the app to start quickly.
Dalvik cache is stored in two locations, at /data/dalvik-cache for user apps and at /cache/dalvik-cache for system apps. We unfortunately have a very small partition for /cache, only 100MB and this sometimes causes a side effect on first boot where it fills up to much with apps that only ever run on the first boot to setup the system and then other dex files cannot be written to the /cache partition which causes them to Force Close (FC). The trick in this situation, is to bear through the FC messages to get the system to the home screen, then reboot into recovery and Wipe Dalvik Cache from the Advanced sub-menu. This will delete all the dex files in both locations I mentioned above and will force the system to regenerate them upon reboot, and this time, those 1-time running apps don't start up and don't end up being optimized which allows the necessary dex files to be created for the apps that were FC'ing.
I have moved what I could from the system partition to the data partition to spare some extra space on /cache but this still sometimes happens, especially as the ROM's get slightly bigger every new major version.
Wow! Thanks so much. Downloading now.
iDynamics said:
Wow! Thanks so much. Downloading now.
Click to expand...
Click to collapse
Wow, you already found it and I wasn't even finished putting everything up... make sure you use the new CWM, very very very important!
Followed the instructions ( to the best of my ability ) but I'm getting a random red border flicker every so often. I'm also not seeing the 91fixoverlays script in my init.d folder.
Smooth rom so far!
iDynamics said:
Followed the instructions but I'm getting a random red border flicker every so often. I'm also not seeing the 91fixoverlays script in my init.d folder.
Smooth rom so far!
Click to expand...
Click to collapse
I totally forgot to update the build.prop with the build type, it is responsible for the red border. Either use a build.prop editor or open the /system/build.prop with a text editor and change the following line:
ro.build.type=eng
Click to expand...
Click to collapse
Change it to:
ro.build.type=user
Click to expand...
Click to collapse
You will need to reboot after making this change.
In regards to the 91fixoverlays script, I do appologize. I forgot to include it in the zip... Please download the attached 91fixoverlays.txt file and rename it to 91fixoverlays and move it to /system/etc/init.d and change it's permissions to match the other files in that directory.
Sorry for missing these two things. I will update the packages ASAP and will post a note when it's done so you know that there is no need to follow the steps in this post.
Much appreciated! No more red flickering. Thanks!
Wow! Thank you!
Sent from my SGH-I757M using xda app-developers app
This. Is. Amazing!!!!!
Downloading now, will install and report back in a bit with findings.
Thanks so much!!
Awesome. Downloading. Will report back. Thanks!
Sent from my SGH-I757M using xda premium
I'm first!! (to post, anyway).
Installed the ROM. Did a clean flash (factory reset).
Upon the boot I got "Unfortunately Bluetooth Share has stopped" but appears to be no ramifications.
ROM looks great! Feels smooth.
Will do more testing.
Thanks
Zippy Dufus said:
I'm first!! (to post, anyway).
Installed the ROM. Did a clean flash (factory reset).
Upon the boot I got "Unfortunately Bluetooth Share has stopped" but appears to be no ramifications.
ROM looks great! Feels smooth.
Will so more testing.
Thanks
Click to expand...
Click to collapse
I think this is due to our oddly small cache partition. Only 100MB as compared to the skyrocket at 300MB. Currently, I only moved four apps in the gapps package to the data partition do that their dex files don't end up in the /cache/dalvik-cache dir and instead end up in /data/dalvik-cache. I think I need to move others. I also think that it happens only on first boot without side effects because a couple of the installed apps only run on first boot, then their dex files can be deleted (I think this happens automatically).
Sent from my SGH-I757M using XDA Premium 4 mobile app
Thanks titanic_fanatic, you've breathed new life into an old phone
Sent from my SGH-I757M using Tapatalk 2
Only issue I've run into so far is that auto rotate doesn't seem to work :-/
Sent from my SGH-I757M using XDA Premium 4 mobile app
I enabled kernel same page merging under performance and no lock screen issues.
Sent from my SGH-I757M using xda app-developers app
rukusx7 said:
I enabled kernel same page merging under performance and no lock screen issues.
Sent from my SGH-I757M using xda app-developers app
Click to expand...
Click to collapse
Cool, I'll give that a try. Anyone else having auto-rotation issues?
Sent from my SGH-I757M using XDA Premium 4 mobile app
Rotation is not working for me, though I always keep it on portrait anyway so I am not complaining.
Rotation doesn't work here, and every so often I run into spells where the only button that works is the home button and haptic feedback stops working all around. A reboot fixes it and it seems random. Other than those few things this is soooooo smooth. I'm happy. Thanks so much!
Sent from my SGH-I757M using xda premium
Fix for Sensors
Hey guys, to fix the sensors, download this attachment sensors.default.so.txt and rename it to sensors.default.so, move it to /system/lib/hw and give it the same permissions as the other files in that directory, then reboot and your sensors should be working
Works now! Thanks ya muchly.
Sent from my SGH-I757M using xda premium
Heres a collection of issues people have had and the ways I've seen to fix them so far. This is just what I've gathered from the CM12 and Liquid Smooth threads to try and organize it all into one post. I will try to keep this updated everyday as users find fixes (Credit will be given where credit is due). Fixes for older builds will eventually be moved to the bottom of the post as they become obsolete.
These are not guaranteed fixes, but may be able to help! This is not a support thread! I am not a developer!If this post helps you, hit thanks! If this post linked to another post that helped, please hit thanks on that post also!
If you have a fix feel free to reply and let me know so I can add it to the OP!
I flashed the rom and I dont have root!
> Download and flash the SuperSU 2.37 zip from the URL below. If you need to get to recovery, enable advanced reboot options. Its under security settings in Liquid Smooth, and under developer options in CM12.
http://download.chainfire.eu/supersu
Lost Internal SDcard Access?
> Enable USB Debugging and use ADB to issue these commands:
Code:
adb shell
su
restorecon –FR /data/media/0
> Or run these commands from terminal emulator:
Code:
su
restorecon –FR /data/media/0
> Or install and run LG CM12 Storage Fixer from here: (Thanks to -viperboy-)
http://forum.xda-developers.com/showpost.php?p=56956094&postcount=1774
> (Alternatively, you can download a flashable zip that installs LG CM12 Storage Fixer here)
https://www.mediafire.com/?3nqc51za6y1phof
All my SDcard contents are in folder 0…?
> Run this command from terminal emulator:
Code:
mv /sdcard/0/* /sdcard/
(Add another /0/ for every nested 0 folder. For example, with two 0 folders the command is: mv /sdcard/0/0/* /sdcard/)
> Or manually move the contects of /sdcard/0/ to /sdcard/ in a file manager
> Or flash the zip from somboons post here:
http://forum.xda-developers.com/showpost.php?p=57058359&postcount=75
Knock On/Double Tap 2 Wake (DT2W) not working?
> Try running this command from terminal emulator
Code:
echo "1" > /sys/devices/virtual/input/lge_touch/touch_gesture
(May have to be run after every boot, if so see one of the methods below)
> Need the init.d script for DT2W?
http://forum.xda-developers.com/lg-...v4-0-lg-g2-t2948395/post56951929#post56951929
(If this zip doesn't work init.d may be broken on your ROM build. Download Universal Init.d from the playstore, enable it, and reboot and it should work. Otherwise see next method.)
> Or install Device Control from the playstore here:
https://play.google.com/store/apps/details?id=org.namelessrom.devicecontrol
(Features > Knock on) App has other useful features as well!
> Or you can flash Render Kernel for Lollipop (Make sure your variant and ROM build are supported!)
http://forum.xda-developers.com/showpost.php?p=53880675&postcount=2
I can't get data on AT&T or T-Mobile with my VS980?
> Read this thread and flash the zip:
http://forum.xda-developers.com/showthread.php?t=2394689
Roaming bug while on LS980 or VS980 variants?
(A VS980 user reported he lost the ability to send SMS after applying this fix. He restored working SMS by enabling roaming. Just in case you run into this issue)
> Try the following:
Open the dialer and dial *#*#4636#*#* and select "Phone Information" on the menu that pops up. Press the 3 dots menu button. Select "Select radio band". Then select the US band.
(May have to be reapplied after every reboot)
Auto-rotation and/or auto-brightness no longer works?
(Backup your EFS partition in recovery before flashing!!!)
> If your variant is supported you can try flashing the modem for your variant from here (NOT LS980, that variant must be on ZV8 bootloader!):
http://forum.xda-developers.com/showthread.php?t=2705509
Audio distortion on LS980 variant?
> Follow the instructions in this post:
http://forum.xda-developers.com/showpost.php?p=56986665&postcount=2076
I can click record in CM12 Camera or Google Camera to record videos but nothing happens...
> Set the video recording resolution from 4K to 1080p or less. 4K setting let's you push the button but doesn't start recording.
WiFi tethering not working?
> Possible fix, Enter this command into terminal (Thanks to genesixxbf3 for the fix and fma965 for the easy command):
Code:
su
settings put global tether_dun_required 0
Device not entering deep sleep?
> Check your devices logcat for "E: qcom_sensors_hal: Error reading SLOW_TIMER (fd=-1) Bad file number" If visible in your logcat, try what this post says:
http://forum.xda-developers.com/showpost.php?p=57148400&postcount=3148
(Download and use an app from the play store such as Build Prop Editor, or edit the build.prop with a file manager.)
Battery draining quickly? (These are general suggestions)
> Toggle data off when connected to WiFi (I use an automate app to do this automatically)
> Toggle WiFi off when not in use
> Toggle NFC off when not in use
> Toggle location off when not in use
> Set location to Battery Saver (Network only mode) if location is needed. Only flip to High Accuracy when using a navigation app. (I use an automate app to do this automatically, plus turn location off when screen is off)
> Change "wifi.supplicant_scan_interval" to a higher interval in build.prop. Its the default WiFi scan time android always performs to check nearby connections and signal strengths. Its in seconds, so 180 would be a WiFi scan every 3 minutes. (Our ROMs default to 15 seconds at the moment)
> Disable "Lift to Wake" in Display settings
> Don't use/Disable/Uninstall Google Fit
> Use Render Kernel for your variant and ROM build http://forum.xda-developers.com/showpost.php?p=53880675&postcount=2
Lag when dialing numbers or pressing buttons? (May apply to >= 11/29 builds of Liquid Smooth)
> Disable "Use NuPlayer (Experimental)" in developer options.
Netflix issues?
> Try flashing the zip from this post:
http://forum.xda-developers.com/showpost.php?p=57260912&postcount=3572
> Or this one, this is the older one.
http://forum.xda-developers.com/showthread.php?p=57001344
Miracast Fix/Possible Chromecast Fix:
> Follow the instructions in this post:
http://forum.xda-developers.com/showpost.php?p=57103874&postcount=2878
Chromecast Fix:
> Use MirrorEnabler from this post:
http://forum.xda-developers.com/showpost.php?p=54062732&postcount=1
Viper4Android issues?
> The following post has all the information you need to know, including the LolliViper flashable zip:
http://forum.xda-developers.com/showpost.php?p=47858556&postcount=1
I've confirmed it works with Play Music with the following settings: SELinux Permissive, Compatibility mode turned on in V4A, and Use NuPlayer turned off in developer options.
Gesture/Swipe typing not working on keyboard?
> Follow instructions in this post.
http://forum.xda-developers.com/showpost.php?p=58118159&postcount=26
Time keeps resetting every reboot?
> Try installing the apk from this post.
http://forum.xda-developers.com/showthread.php?p=48738679
NFC Force Closing at Boot?
Reboot into recovery
Enter file manager
Navigate to /system/app/nfc
Delete the whole nfc folder
Contacts Force Closing When Editing Contact?
(Unfortunately these are not guaranteed fixes. Always backup the original APKs first!)
> Follow the instructions in this post for the contacts apk only:
http://forum.xda-developers.com/showpost.php?p=57000972&postcount=289
> Or try the contacts apk + instructions in this post:
http://forum.xda-developers.com/showthread.php?p=57002358
@MarkusMcNugen nice work, this would probably help g2 users with their problems. You could maybe ask or maybe the cm12/Liquidsmooth would like include it in his OP in the faq.
@4thehalibit Happy we got auto adding posts into the last post else you would've claimed one page for yourself
@Rashed97 @timpohladthomas
Could you please add this forum to your OP's could save a lot of time answering repetitive questions thank you again @MarkusMcNugen
?Brought to you from my sugary G2
PHN - ls980 (sprint)
AND - 5.0
ROM - Liquid ? v4.0
KRN - Render 2.4.0 (R3)
RCV - TWRP 2.8.1.1 (blastagator)
Hey
Thanks for the people who need it
This fix the chromecast to http://forum.xda-developers.com/hardware-hacking/chromecast/experimental-enable-mirroring-device-t2812193
genesixxbf3 said:
Hey
Thanks for the people who need it
This fix the chromecast to http://forum.xda-developers.com/hardware-hacking/chromecast/experimental-enable-mirroring-device-t2812193
Click to expand...
Click to collapse
Added to OP. Thanks!
MarkusMcNugen said:
Added to OP. Thanks!
Click to expand...
Click to collapse
If you find issues pm me
---------- Post added at 11:42 AM ---------- Previous post was at 11:01 AM ----------
to fix the date (70th bug ) http://forum.xda-developers.com/showthread.php?t=2580974
genesixxbf3 said:
If you find issues pm me
---------- Post added at 11:42 AM ---------- Previous post was at 11:01 AM ----------
to fix the date (70th bug ) http://forum.xda-developers.com/showthread.php?t=2580974
Click to expand...
Click to collapse
Also added to OP.
Sent from my LG-VS980
Added "I flashed the rom and I dont have root!" and battery draining quickly suggestions to the OP.
MarkusMcNugen said:
Added "I flashed the rom and I dont have root!" and battery draining quickly suggestions to the OP.
Click to expand...
Click to collapse
Download the newest super user beta and you will get root back
http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133/page52
?Brought to you from my sugary G2
PHN - ls980 (sprint)
AND - 5.0
ROM - Liquid ? v4.0 (11/26)
KRN - Render 2.4.0 (R3)
RCV - TWRP 2.8.1.1 (blastagator)
4thehalibit said:
Download the newest super user beta and you will get root back
http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133/page52
Click to expand...
Click to collapse
The one I added to the OP is newer. 2.37 is the official release for lollipop support. Installing an older version would just mean having to update SuperSU and the binary afterwards.
MarkusMcNugen said:
The one I added to the OP is newer. 2.37 is the official release for lollipop support. Installing an older version would just mean having to update SuperSU and the binary afterwards.
Click to expand...
Click to collapse
Yeah I was just getting him in the right area [emoji6]
?Brought to you from my sugary G2
PHN - ls980 (sprint)
AND - 5.0
ROM - Liquid ? v4.0 (11/26)
KRN - Render 2.4.0 (R3)
RCV - TWRP 2.8.1.1 (blastagator)
I was using the roaming fix successfully, getting good signal, able to download files, etc. But I tried sending text and it said it couldn't send. Was on AICP 11-29 for vs980. I restored my backup of kitkat because I needed to text, but any ideas what the problem might have been?
VZW LG G2
---------- Post added at 04:08 ---------- Previous post was at 04:06 ----------
I was using the stock messaging app, BTW. Didn't try hangouts.
VZW LG G2
jesssiii said:
I was using the roaming fix successfully, getting good signal, able to download files, etc. But I tried sending text and it said it couldn't send. Was on AICP 11-29 for vs980. I restored my backup of kitkat because I needed to text, but any ideas what the problem might have been?
VZW LG G2
---------- Post added at 04:08 ---------- Previous post was at 04:06 ----------
I was using the stock messaging app, BTW. Didn't try hangouts.
VZW LG G2
Click to expand...
Click to collapse
I would check out your APN settings first and foremost. You can get a data connection and not be able to send SMS with incorrect APN settings. If you haven't yet, it's worth searching the AICP thread to see if anyone else has had SMS issues.
For what its worth, you should try a third-party SMS app like hangouts or the numerous others just in case the stock messaging app has bugs.
I use my VS980 on AT&T and haven't had a single issue with SMS on lollipop so far.
Sent from my LG-VS980
Thanks @MarkusMcNugen, I restored my AICP backup so I could try your suggestions and get logs too. But after rebooting from the restoration I simply allowed roaming and didn't use the fix. I'm able to send now, so I think I'll just leave roaming on, the r is no problem and it's working.
VZW LG G2
MarkusMcNugen said:
WiFi tethering not working?
> Possible fix, Enter this command into terminal (Thanks to genesixxbf3 for the fix and fma965 for the easy command):
Code:
settings put global tether_dun_required 0
Click to expand...
Click to collapse
Ain't gonna work, requires root so therefore you need to SU before that command. obviously with a rooted phone.
jesssiii said:
Thanks @MarkusMcNugen, I restored my AICP backup so I could try your suggestions and get logs too. But after rebooting from the restoration I simply allowed roaming and didn't use the fix. I'm able to send now, so I think I'll just leave roaming on, the r is no problem and it's working.
Click to expand...
Click to collapse
Thanks for letting me know. Ill add that to the OP just in case.
fma965 said:
Ain't gonna work, requires root so therefore you need to SU before that command. obviously with a rooted phone.
Click to expand...
Click to collapse
Good to know, Ill add that to the OP as well.
Added "I can click record in CM12 Camera and Google Camera to record videos but nothing happens..." and "Audio distortion on LS980 variant?" temp bugfixes to OP.
Bump! Reviving this thread from the 5th page graveyard.
Since flashing the SD card fix I've been getting this error in twrp that says, E:Resource type (font) failed to load
Also in twrp manager it tells me it can't write properly to my SD card and wants to do a fix which will alter system. I always say no since I don't know what it plans to do. It still seems to work the same and twrp flashes and backs up fine, though I haven't tried restoring anything since this issue arose.
Anyone know anything about it?
LG G2 VS980
Flash the latest Twrp (2.8.2.0) and see if you're still having issues
VS980 Running AICP Lollipop
Trying to keep Vanir up-to-date for our otherwise dead phone . Fix minor bugs, add minor features, a bit of compiler optimization.
I'm not updating the whole rom here! Development of branch cm-11.0 for both Vanir and CyanogenMod has stopped, so there won't be any surprises here!
Bugs:
- adb over usb doesn't work in android (but works over wifi and in recovery it works normally, so no problem)
- clear notifications icon missing when switching from quicksettings
- call recording doesn't work
- synapse doesn't work
ART:
Apart from 2 inconveniences, ART works and is fast
- optizing one app on reboot - it's a bit annoying, but otherwise harmless (happens only sometimes)
- immediately after switching to ART phone won't sleep (power button doesn't work. Just leave it for a while (15-30 minutes) and let it settle - once the screen turns of by itself, everything wil be normal
Deep sleep issue (if exists):
Check using Better Battery Stats or any tool of your choice. If it is caused by Google Play Services, simply deny them wakelock priviledge: Go to Settings/Security/Privacy Guard/Google Play Services and set Keep awake -> denied. It won't hurt sync, no worries.
Feature requests:
- Smart Pulldown from Omnirom Done
- NonIntrusive incoming call screen (@force)
XDA:DevDB Information
Vanir 4.4.4, ROM for the Samsung Galaxy S Advance I9070
Contributors
mkaluza
Source Code: https://github.com/mkaluza/
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
Based On: Vanir
Version Information
Status: Stable
Current Stable Version: 2015-08-11
Stable Release Date: 2015-08-11
Created 2015-05-28
Last Updated 2015-08-11
first of all, thanks again for keeping this ROM updated and alive you should add some tags in the topic title such as [ROM] [KK] [4.4.4] and the release date, so that it's more visible and captivating
Found. Dowloading. Torrent is the best way to share information. All developers must use it.
Thanks and reporting...
@mkaluza @edukardo @TheSteve87 May i have some screenshots please....
experimenta 2015-05-30
Hi!
New experimental build. It is _fast_ Added more optimization flags from ArchiDroid. It still has the location FC issue though, so if it's a problem for you, stay with stable.
Enjoy
$4ND!P said:
@mkaluza @edukardo @TheSteve87 May i have some screenshots please....
Click to expand...
Click to collapse
here's a bunch of screenshots, the last ones have the vanir black theme
@mkaluza i'm having a weird bug with the last stable build, i want to install two apps as system apps (cm file manager since this rom dowsn't have one and novathor settings because of power and volume options) but everytime i try to install them, after rebooting the phone works for 30seconds, then freezes and reboots and it becomes unusable. any idea about why?
I have a problem with hotspot shield vpn
It won't start
And says
Af openvpn inti. Faild
I tried other vpn apps but they don't work
Any suggestion
mhmod222 said:
I have a problem with hotspot shield vpn
It won't start
And says
Af openvpn inti. Faild
I tried other vpn apps but they don't work
Any suggestion
Click to expand...
Click to collapse
Yes, load tun module. Either via KoControl app or from terminal: su and then "modprobe tun"
TheSteve87 said:
@mkaluza i'm having a weird bug with the last stable build, i want to install two apps as system apps (cm file manager since this rom dowsn't have one and novathor settings because of power and volume options) but everytime i try to install them, after rebooting the phone works for 30seconds, then freezes and reboots and it becomes unusable. any idea about why?
Click to expand...
Click to collapse
NT settings are old and mess with the kernel. Besides it's a ROM app, so you can't just take any version - it had to be built with the ROM. I don't support it.
Attached cm file manager to post 1 - try it (just drop it to /system/app as it doesn't seem to install the normal way)
@TheSteve87 what exactly do you need from nt app? Maybe I'll be able to add it into synapse.
mkaluza said:
@TheSteve87 what exactly do you need from nt app? Maybe I'll be able to add it into synapse.
Click to expand...
Click to collapse
i mainly use two settings, the battery voltage (?) control to have a faster charge and the audio gain options to higher the earbuds/speakers' volume
btw novathor settings are not that old, i actually extracted the apk from epirex's latest cm11 build and pushed it to /system on your vanir with no issues at all at least on the build before the beta version
Sent from my GT-I9070 using XDA Free mobile app
How to install that? I done Odin ,temp CWM, flash rom and my phone stuck on boot.
xxziolo13xx said:
How to install that? I done Odin ,temp CWM, flash rom and my phone stuck on boot.
Click to expand...
Click to collapse
If you come from another ROM with mk kernel, don"t forget to delete ramdisk
edukardo said:
If you come from another ROM with mk kernel, don"t forget to delete ramdisk
Click to expand...
Click to collapse
I was on stock LQL with CoCore, then i did odin, format everything in temporary CWM and flash rom. My phone stuck on boot whole night. Any ideas?
xxziolo13xx said:
I was on stock LQL with CoCore, then i did odin, format everything in temporary CWM and flash rom. My phone stuck on boot whole night. Any ideas?
Click to expand...
Click to collapse
Install aromafm and search /efs for a boot.cpio.gz file. Delete or rename it and try again.
edukardo said:
Install aromafm and search /efs for a boot.cpio.gz file. Delete or rename it and try again.
Click to expand...
Click to collapse
LOL. I forgot about it when i was on Loilipop, now it is working.
It was muy mistake too. This vanir is superb
edukardo said:
It was muy mistake too.
Click to expand...
Click to collapse
Yeah... I can see this ramdisk stuff causes a bit of trouble. I already have an idea for 'smart' installer, that will autodetect system version and install correct ramdisk for the user.
This vanir is superb
Click to expand...
Click to collapse
And it'll only get better I almost nailed the correct compiler flags, so the next stable version will have the speed of beta (or more ), but of course without the NetworkLocationService bug.
Battery backup
Hi, my friend.
I've seen a known bug in CM11 derivated roms like this one. This is related to systemupdate service, the rom tryies to connect to cm software update but couldn't and causes a lot of aware.
I made this script and ran it at every boot
Code:
#!/system/bin/sh
pm disable com.google.android.gms/.update.SystemUpdateService
pm disable com.google.android.gms/com.google.android.gms.update.SystemUpdateActivity
pm disable com.google.android.gms/com.google.android.gms.update.SystemUpdateService
pm disable com.google.android.gms/com.google.android.gms.update.SystemUpdateService$ActiveReceiver
pm disable com.google.android.gms/com.google.android.gms.update.SystemUpdateService$Receiver
pm disable com.google.android.gsf/com.google.android.gsf.update.SystemUpdateActivity
pm disable com.google.android.gsf/com.google.android.gsf.update.SystemUpdateService
pm disable com.google.android.gsf/com.google.android.gsf.update.SystemUpdateService$ActiveReceiver
pm disable com.google.android.gsf/com.google.android.gsf.update.SystemUpdateService$Receiver
It make the system wake ups almost dissapear. You could try to put it in your code if you think is correct.
Regards.
edukardo said:
Hi, my friend.
I've seen a known bug in CM11 derivated roms like this one. This is related to systemupdate service, the rom tryies to connect to cm software update but couldn't and causes a lot of aware.
I made this script and ran it at every boot
Code:
#!/system/bin/sh
pm disable com.google.android.gms/.update.SystemUpdateService
pm disable com.google.android.gms/com.google.android.gms.update.SystemUpdateActivity
pm disable com.google.android.gms/com.google.android.gms.update.SystemUpdateService
pm disable com.google.android.gms/com.google.android.gms.update.SystemUpdateService$ActiveReceiver
pm disable com.google.android.gms/com.google.android.gms.update.SystemUpdateService$Receiver
pm disable com.google.android.gsf/com.google.android.gsf.update.SystemUpdateActivity
pm disable com.google.android.gsf/com.google.android.gsf.update.SystemUpdateService
pm disable com.google.android.gsf/com.google.android.gsf.update.SystemUpdateService$ActiveReceiver
pm disable com.google.android.gsf/com.google.android.gsf.update.SystemUpdateService$Receiver
It make the system wake ups almost dissapear. You could try to put it in your code if you think is correct.
Regards.
Click to expand...
Click to collapse
I'm not 100% sure, but it could be related to this one:
http://review.cyanogenmod.org/#/c/94128/
Hello guys today i will give some information about Flyme 5 global edition for Meizu m2/miniBefore we begin here is change-logs of this firmware
:good: Flyme 5.1.6.0 G:good:
[System]
Update to Flyme 5
Add Theme
Added the function of sliding up the floating call notification to mute the call;
Optimized the brightness adjustment;
Optimized system translations
[Communications]
Optimized the full-screen incoming call page;
Optimized the Talkback support of dialpad;
Optimized the dialpad which will stay unfolded when dialing;
Fixed the bug of no favorite contacts in DND white list and speed dial adding;
When edit a contacts IM info, Hangouts would be the default label;
Added "3G only" network type;
Fixed the occasional bug of unable to auto-match contact when typing numbers;
Fixed the bug of no transitioning animation when tap the dial icon;
Fixed the bug when two numbers have the same last 7 digits, the call logs will be merged as from one phone number;
Fixed the occasional blank list in Contacts;
[Camera]
Fixed the bug of blur preview page after shooting photos in manual mode;
Fixed the bug of when the sound effect of photo shooting is turned off, and the users switch to photo mode after using Video or Slo-mo modes, the sound effect still exists;
Fixed the bug of the camera being unable to focus and meter when shooting GIFs;
Fixed the clipping error in square mode;
Fixed the focusing issue;
Fixed the bug when using Macro mode after shooting a video, the camera cannot focus on the object;
Fixed the bug when the camera is activated by third-party apps, there is no OK and re-take button;
[Audio]
Fixed the unchanged volume bug when adjust the volume by a little bit;
[Security]
Fixed the issue of incomplete display of missed calls and unread messages on notification bar under Super mode in extra-large font;
[Home screen]
Now the icons and widgets can be moved directly in editing mode;
Added the function of allowing using emoji in app folder names;
Added a new feature which enables users to copy and paste the folder names on Home screen;
Optimized the notification position when editing the Home screen;
Fixed the occasional freezing issue;
[Settings]
Add password retrieving option to Vault of File Explorer and locked apps;
Optimized the app management page, the Downloaded option is changed to Installed;
Fixed the displaying abnormity in Battery;
Fixed the crash down issue when tap ‘APNs’ in ‘SIMs and networks’;
Fixed the crash down issue when tap on the encrypted apps under Guest mode;
[Power]
Changed the screen brightness in Super mode to smart adjustment;
[Messages]
Optimized the intro page of the group message naming feature;
Optimized the popup style of a message when holding by the user;
Fixed the bug of unable to restore default operation after tap on Restore icon in names editing page.
Fixed the problem of occasional mistakes in recognizing message cards;
[Notification bar]
Fixed the bug of the notifications which have been read would pop up again on notification bar;
[Gallery]
Fixed the blank area bug on the bottom bar when tap on a photo thumbnail to view it in full-size;
[Lock screen]
Optimized the color solution on lock screen so users can see the time on the screen clearly’
Changed the Camera activating method from Sliding leftwards to sliding upwards;
[File Explorer]
Remarked folder names will be displayed preferably for folders in Pictures;
[Download]
Reconstructed download page where MD5 calculating feature is removed and the launching speed is optimized;
By default, Download app will allow downloading only under WLAN;
[Quick share]
Data-free quick share: Optimized sharing experience, added visible managing page.
Download Links
Direct Download link no login required in flyme forums:
http://www.res.flymeos.com/Firmware/Flyme/m2/5.1.6.0G/intl_stable/20160531173757/2912bf5c/update.zip
Flyme Forum Link
http://www.flymeos.com/firmwarelist?modelId=18&type=1
Xposed Installer
https://drive.google.com/uc?id=0B0mRC0Z3somRSm45NEpOS1U5Qnc&export=download
Flyme Tools
http://rgho.st/7fGcyJsj8
How to install?
1)Download "Update.zip" from above given link,
2)Place that "Update.zip" to root directory of internal storage,
3)With stock file manager navigate to that file,
4)Press on that file once,
5)A prompt will appear tick on wipe data and then press ok,
6)It will Boot to flyme stock recovery and will start the process,
7)After Process complete it will boot on Flyme 5.1.6.0G OS.
How to install Xposed Installer and its framework?
1)Download "Xposed Installer" from above given link,
2)Extract Xposed Installer.zip file via zip extractor(Flyme Inbuilt) Or Any 3rd Party App,
3)Install Xposed installer.apk,
4)Open the app and press install (first line install),
5)After installing Xposed InstallerAlpha.apk Install its framework,
6)Press Second Line install press on it will automatically reboot your phone and done.
How to install Flyme Tools?
1)Download "Flyme Tools" from above given link,
2)As you have installed xposed installer and activated its framework Install Flyme Tools,
3)Activate it module on xposed installer and reboot your phone.
Some Additional tips:
1)You can install This frimware on any other meizu provided frimware,
Eg Flyme 4.5.4I,Flyme 5.1.6.0Y(Stable Yun Flyme 5),Flyme 5.6.2.4(Beta Yun Flyme 5) Any
(Not applicable for Custom roms)
2)No need to unroot your phone before switching to any os in meizu phones.
How To Root Flyme 5?
1. Download Kingroot from app store the AppStore
Or download it from here
http://kingroot.en.uptodown.com/android
2. Download terminal emulator from PlayStore
3. Download file SuperSU.zip
http://www.mediafire.com/?g7db104mlbc1f2t
Steps :
1. Install Kingroot
2. Once it installed do not open it.
Open settings/accessibility/services Tick on Kingroot
.
3. Open kingroot,follow its procedures . wait up to 100 % , close & Reboot !!!
4. Unzip and place in the internal
storage
SuperSU.zip
5. Install the terminal emulator
from playstore
6. Open a terminal app type " su "(without quotes) do not forget to Grant Permission
7. Type "sh /sdcard/mrw/root.sh"(without quotes)
if error appear like no file found try this command,
"sh /storage/emulated/0/mrw/root.sh"(without quotes)
wait until the finish,(Erros will apper neglect it) Automatically SuperSU will install.
Update Super su binary
.
8.Reboot
This is all i want to share about global update if i miss something important post it in comment section will update as per as new comments will come.
:good: Press thanks if you liked my post no donation required :good:
Enjoy :laugh:
Regards: Murtaza Piplod
thank for the info..
and how to change the font? i just upgraded 5.1.6.0G from y version, there is no font changer in theme aplication like Y version.
Gooner34 said:
thank for the info..
and how to change the font? i just upgraded 5.1.6.0G from y version, there is no font changer in theme aplication like Y version.
Click to expand...
Click to collapse
Use IFont App as it was also a chiness fonts which cant be crossported to global version they removed it regards
Sent from my m2 using XDA-Developers mobile app
i used font installer (fontfix) but it's ain't work. i'll try iFont, it's don't needs xposed right?
Gooner34 said:
i used font installer (fontfix) but it's ain't work. i'll try iFont, it's don't needs xposed right?
Click to expand...
Click to collapse
yes i font will work for sure but you need to root your m2 for it
Sent from my m2 using XDA-Developers mobile app
Hello,
i follow your guide step by step, but KingRoot don't find my device PRO 5.. What i can due ??
Thanks
ask
I will instal xposed. I've completed a root and install xposed but after that some applications such as social media, etc. can not be opened (force closed), everything is appropriate and successful procedure. Could help it why?
guysplz hep me out i have upgraded my meizu m2 to latest version just nw after completing upgrade its saying couldnot open launcher 3
murtaza1326 said:
yes i font will work for sure but you need to root your m2 for it
Sent from my m2 using XDA-Developers mobile app
Click to expand...
Click to collapse
helpme, i just used flymetools to change the status bar icons, but those icons not in the right place. how to fix that?
Anyone use flyme 5 in meizu m2? Hows it for daily use? Stable enough? I've read in some forum, and there's various bugs occurs and no solved yet. Im currently in flyme 4.5.3I on my meizu m2.
I follow ur guide step by step but When i type command "su" in terminal emu "not found".. Please Help.. ?
murtaza1326 said:
Hello guys today i will give some information about Flyme 5 global edition for Meizu m2/miniBefore we begin here is change-logs of this firmware
:good: Flyme 5.1.6.0 G:good:
[System]
Update to Flyme 5
Add Theme
Added the function of sliding up the floating call notification to mute the call;
Optimized the brightness adjustment;
Optimized system translations
[Communications]
Optimized the full-screen incoming call page;
Optimized the Talkback support of dialpad;
Optimized the dialpad which will stay unfolded when dialing;
Fixed the bug of no favorite contacts in DND white list and speed dial adding;
When edit a contacts IM info, Hangouts would be the default label;
Added "3G only" network type;
Fixed the occasional bug of unable to auto-match contact when typing numbers;
Fixed the bug of no transitioning animation when tap the dial icon;
Fixed the bug when two numbers have the same last 7 digits, the call logs will be merged as from one phone number;
Fixed the occasional blank list in Contacts;
[Camera]
Fixed the bug of blur preview page after shooting photos in manual mode;
Fixed the bug of when the sound effect of photo shooting is turned off, and the users switch to photo mode after using Video or Slo-mo modes, the sound effect still exists;
Fixed the bug of the camera being unable to focus and meter when shooting GIFs;
Fixed the clipping error in square mode;
Fixed the focusing issue;
Fixed the bug when using Macro mode after shooting a video, the camera cannot focus on the object;
Fixed the bug when the camera is activated by third-party apps, there is no OK and re-take button;
[Audio]
Fixed the unchanged volume bug when adjust the volume by a little bit;
[Security]
Fixed the issue of incomplete display of missed calls and unread messages on notification bar under Super mode in extra-large font;
[Home screen]
Now the icons and widgets can be moved directly in editing mode;
Added the function of allowing using emoji in app folder names;
Added a new feature which enables users to copy and paste the folder names on Home screen;
Optimized the notification position when editing the Home screen;
Fixed the occasional freezing issue;
[Settings]
Add password retrieving option to Vault of File Explorer and locked apps;
Optimized the app management page, the Downloaded option is changed to Installed;
Fixed the displaying abnormity in Battery;
Fixed the crash down issue when tap ‘APNs’ in ‘SIMs and networks’;
Fixed the crash down issue when tap on the encrypted apps under Guest mode;
[Power]
Changed the screen brightness in Super mode to smart adjustment;
[Messages]
Optimized the intro page of the group message naming feature;
Optimized the popup style of a message when holding by the user;
Fixed the bug of unable to restore default operation after tap on Restore icon in names editing page.
Fixed the problem of occasional mistakes in recognizing message cards;
[Notification bar]
Fixed the bug of the notifications which have been read would pop up again on notification bar;
[Gallery]
Fixed the blank area bug on the bottom bar when tap on a photo thumbnail to view it in full-size;
[Lock screen]
Optimized the color solution on lock screen so users can see the time on the screen clearly’
Changed the Camera activating method from Sliding leftwards to sliding upwards;
[File Explorer]
Remarked folder names will be displayed preferably for folders in Pictures;
[Download]
Reconstructed download page where MD5 calculating feature is removed and the launching speed is optimized;
By default, Download app will allow downloading only under WLAN;
[Quick share]
Data-free quick share: Optimized sharing experience, added visible managing page.
Download Links
Direct Download link no login required in flyme forums:
http://www.res.flymeos.com/Firmware/Flyme/m2/5.1.6.0G/intl_stable/20160531173757/2912bf5c/update.zip
Flyme Forum Link
http://www.flymeos.com/firmwarelist?modelId=18&type=1
Xposed Installer
https://drive.google.com/uc?id=0B0mRC0Z3somRSm45NEpOS1U5Qnc&export=download
Flyme Tools
http://rgho.st/7fGcyJsj8
How to install?
1)Download "Update.zip" from above given link,
2)Place that "Update.zip" to root directory of internal storage,
3)With stock file manager navigate to that file,
4)Press on that file once,
5)A prompt will appear tick on wipe data and then press ok,
6)It will Boot to flyme stock recovery and will start the process,
7)After Process complete it will boot on Flyme 5.1.6.0G OS.
How to install Xposed Installer and its framework?
1)Download "Xposed Installer" from above given link,
2)Extract Xposed Installer.zip file via zip extractor(Flyme Inbuilt) Or Any 3rd Party App,
3)Install Xposed installer.apk,
4)Open the app and press install (first line install),
5)After installing Xposed InstallerAlpha.apk Install its framework,
6)Press Second Line install press on it will automatically reboot your phone and done.
How to install Flyme Tools?
1)Download "Flyme Tools" from above given link,
2)As you have installed xposed installer and activated its framework Install Flyme Tools,
3)Activate it module on xposed installer and reboot your phone.
Some Additional tips:
1)You can install This frimware on any other meizu provided frimware,
Eg Flyme 4.5.4I,Flyme 5.1.6.0Y(Stable Yun Flyme 5),Flyme 5.6.2.4(Beta Yun Flyme 5) Any
(Not applicable for Custom roms)
2)No need to unroot your phone before switching to any os in meizu phones.
How To Root Flyme 5?
1. Download Kingroot from app store the AppStore
Or download it from here
http://kingroot.en.uptodown.com/android
2. Download terminal emulator from PlayStore
3. Download file SuperSU.zip
http://www.mediafire.com/?g7db104mlbc1f2t
Steps :
1. Install Kingroot
2. Once it installed do not open it.
Open settings/accessibility/services Tick on Kingroot
.
3. Open kingroot,follow its procedures . wait up to 100 % , close & Reboot !!!
4. Unzip and place in the internal
storage
SuperSU.zip
5. Install the terminal emulator
from playstore
6. Open a terminal app type " su "(without quotes) do not forget to Grant Permission
7. Type "sh /sdcard/mrw/root.sh"(without quotes)
if error appear like no file found try this command,
"sh /storage/emulated/0/mrw/root.sh"(without quotes)
wait until the finish,(Erros will apper neglect it) Automatically SuperSU will install.
Update Super su binary
.
8.Reboot
This is all i want to share about global update if i miss something important post it in comment section will update as per as new comments will come.
:good: Press thanks if you liked my post no donation required :good:
Enjoy :laugh:
Regards: Murtaza Piplod
Click to expand...
Click to collapse
Do i get warranty avoid with this flashing.
Sorry for late reply guys i am kinda bussy well bro no there is no warrenty void if you unroot it again
jameschintu said:
Do i get warranty avoid with this flashing.
Click to expand...
Click to collapse
well bro there will no wareenty void its official software
Gooner34 said:
helpme, i just used flymetools to change the status bar icons, but those icons not in the right place. how to fix that?
Click to expand...
Click to collapse
Bro in flyme tools there is option to revert back use it or update it to latest version find on net about it
~regards
Sorry for late reply ????
buddy f5 is good enough for daily use i will point out some problems are
(1)Dirach HD is removed by flyme
(2)Camera is not that clear in upgraded version of flyme
(3)Battery drains like hell
~Regards
wahyusaga said:
I follow ur guide step by step but When i type command "su" in terminal emu "not found".. Please Help.. ?
Click to expand...
Click to collapse
it means your phone is not rooted
can i use this xposed in f5.1.9Y
can i use this xposed in f5.1.9Y ?
---------- Post added at 01:06 PM ---------- Previous post was at 12:34 PM ----------
i use this metode in f5.1.9.Y
But the xposed framework not installed.
Version 4.5.3.2C
Hi there! I have version 4.5.3.2C. How can I change to install this global firmware? I can't find a specific tutorial for my version... Thank you
Thread moderator please close this thread
i have moved to custom roms based on Android 7.1.2 if you want to use them just search abt them in XDA forums you will find plenty of custom roms
i am no longer running on flyme so i will not reply any one thanks
Thread moved to : https://forum.xda-developers.com/le-max-2/how-to/le-max-3-eui-5-9-021sr2-diamantik-t3856853
Disclaimer : I am not responsible for bricked devices, dead phones, or you getting fired because the alarm app failed. Please do some research if you have any concerns about doing this to your device .
YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, your data , i will laugh at you.
I am happy to present you , the best EUI 5.9.21S experience for the Le Max 3 ( X850 ) .
Things changed and improved :
-> Launcher now support drawer mode ( ported from 28S)
-> Latest Super Manager , with data usage notification ( also from 28S)
-> Removed many useless applications
-> Improved system audio
-> The quiet sound in headphones is now fixed
Tip: Turn off Dolby Atmos , the speaker, earpiece, and headphones will be way louder .
-> Kernel Tweaks and battery optimization scrips
-> [ Update 13/10 ] Changed the behaviour of the deep sleep.
If you encount a bug , please tell me the details in this thread .
Download : http://bit.ly/2yNoUui
** The " R(Number) " means the release number of the ROM , like R1 - first release
The Deep sleep tuner :
http://bit.ly/2EwB9kU
*Install via TWRP above the current ROM , you don't need to change or wipe nothing .
It really helps with the battery life
How to install :
1. You need to have the bootloader unlocked , and the TWRP installed . ( How to do that ( my post link) : https://forum.xda-developers.com/showpost.php?p=76620374&postcount=7 )
**After unlocking the bootloader , you get a green notification led and the phone not turning on , when you try to boot your phone .
[ THE SOLUTION IS : To boot into TWRP ( volume up and power button ) and from TWRP , tap on Reboot --> System , this will boot the phone normally , currently we can do nothing to solve this :crying: ]
Note : If you come from another ROM , you will need to do an wipe on system , data , cache .
Also please take a backup ,if you have already TWRP , and in case you want to restore back.
2. Download the "Deep sleep tuner" and the " 21S Firmware & Modem by @moto999999 ": https://androidfilehost.com/?fid=674106145207488760
3. Download and copy the ROM , Universal_GMS_Doze.zip , and 21S_Firmware_&_Modem_x10.zip inside your internal memory
4. Flash the 21S_Firmware_&_Modem_x10.zip
5. Flash the ROM
6. Flash the Magisk
7. Flash the Universal_GMS_Doze
Apps that I recommend : ( they are not in the ROM)
( Updated 12/10 )
( Currently using all from this list )
1. Power Shade ( adds a new notification bar with android P style , with changed notifications and toggles for all the things. )
**Tip : Select USA region for showing apps in status bar , not an 3 dot circle
2. Add Away ( Removes adds system-wide)
3. Install button Unlocker ( Allows you to bypass the restriction "screen overlay detected" and allow the permison to apps )
4. AndroiTS GPS Test Pro ( for GPS to indentify you faster , first time after instaling the ROM )
5. Greenify - helps with the battery life
6. Volume Booster by GOODEV - boost even more the headphone sound :laugh:
For those that want to freeze apps , a simple and bug-less list :
Note : Is not mandatory !!!
LeEco account
LeEco setup wizard
MyLeEco
LeTVEcoProvider
ANT HAL Service
Fido ( all 3 apps )
VCalendar
Market Feedback Agent,
Following Feed
Fast Transfer
Effect Service
Crash Handler
EuiTransfer.AppData
Bubbles
and AOSP keyboard , if you have Gboard , or another keyboard .
You can use Titanium Backup ( Pro - required ) for this , or IceBox , or any other apps
Credits to @moto999999 for :
- Initial release
- Tweaks to the kernel and battery
@Luis4x4 for all the research he made , for the money he spent on the unlocking bootloader ( ~600 $ ) , and for paying the unbricking of my device . And both for being awesome guys
Credits for rest of the work goes to me @diamantik
Reserved
( In future : maybe i will be able to unlock the lens blur processing for current date )
Will be great ??
[email protected] said:
( In future : maybe i will be able to unlock the lens blur processing for current date )
Will be great
Click to expand...
Click to collapse
Well i will try to unlock , but i really don't think i will be able to do that :crying:
If i succed i will update the post
unlock the lens blur processing for current date
Really like this!
min1968 said:
unlock the lens blur processing for current date
Really like this!
Click to expand...
Click to collapse
I wish i could
I have tried , but failed , need someone who can help , but idk who
diamantik said:
Disclaimer : I am not responsible for bricked devices, dead phones, or you getting fired because the alarm app failed. Please do some research if you have any concerns about doing this to your device .
YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, i will tell that you have done all the changes , and took the risk.
I am happy to present you an more better EUI 5.9.21S experience for the Le Max 3 ( X850 ) .
Things changed and improved :
-> Launcher now support drawer mode ( ported from 28S)
-> Latest Super Manager , with data usage notification ( also from 28S)
-> Removed many useless applications
-> Improved system audio
-> The quiet sound in headphones is now fixed
Tip: Turn off Dolby Atmos , the speaker, earpiece, and headphones will be way louder .
-> Kernel Tweaks and battery optimization scrips
( In future : maybe i will be able to unlock the lens blur processing for current date )
If you encount an bug , please tell me the details in this thread .
Download : https://drive.google.com/open?id=1tCsHaJK1MmHzuQUJQSv4mltBFA_L7M5w
** The " R(Number) " means the release number of the ROM , like R1 - first release
How to install :
1. You need to have the bootloader unlocked , and the TWRP installed . ( How to do that ( my post link) : https://forum.xda-developers.com/showpost.php?p=76620374&postcount=7 )
**After unlocking the bootloader , you can get an green notification led and the phone not turning on , when you try to boot your phone .
[ THE SOLUTION IS : To boot into TWRP ( volume up and power button ) and from TWRP , tap on Reboot --> System , this will boot the phone normally , currently we can do nothing to solve this :crying: ]
Note : If you come from another ROM , you will need to do an wipe on system , data , cache .
Also please take an backup , if you want to restore back
2. Download the 21S Firmware & Modem by @moto999999 : https://androidfilehost.com/?fid=674106145207488760
3. Download and copy the ROM , and 21S_Firmware_&_Modem_x10.zip inside your internal memory
4. Flash the 21S_Firmware_&_Modem_x10.zip
5. Flash the ROM
6. After that you can root
***Suggest to root with Magisk ( is way better that SuperSU , and you will can use Snapchat , and will can hide the root )
Apps that I recommend : ( they are not in the ROM)
1. Material Notification Shade Pro ( adds an new notification bar , toggles , android P , O , N style )
**Tip : Select USA region for showing apps in status bar , not an 3 dot circle
2. Add Away ( Removes adds system-wide)
3. Install button Unlocker ( Allows you to bypass the restriction "screen overlay detected" and allow the permison to apps )
4. AndroiTS GPS Test Pro ( for GPS to indentify you faster , first time after instaling the ROM )
Credits to @moto999999 for :
- Initial release
- Tweaks to the kernel and battery
Credits for rest of the work goes to me @diamantik
Click to expand...
Click to collapse
Diamantik I try to insstall Your ROM but ask me about password.... it is possibile ?
[email protected] said:
Diamantik I try to insstall Your ROM but ask me about password.... it is possibile ?
Click to expand...
Click to collapse
You have boot into TWRP , and there is written " Data Encrypted " ?
If yes then skip , and go in TWRP :
--> Tick "do not show again" and the swipe to allow modification. ( if promting )
--> Skip device encryption by clicking "Install" (if the storage size is 0mb or no folder is showing while trying to install, then the device is encrypted. )
--> For solve that, click "Wipe" --> choose to " Format Data " and type " yes " and swipe to format . It's going to wipe EVERYTHING in the internal storage (that's the purpose of device encryption, to prevent unauthorized access to the storage).
--> When completed, go back, click "Reboot" --> "Recovery" , this will restart your recovery (very important, do not reboot the phone into system otherwise you'll start all over. Reboot into recovery, not system).
---> From recovery, click "Install" > and select first the " EUI5.9 firmware and modem " and flash it , after that flash my EUI5.9 , after that you can root , suggest with Magisk
Keep in mind , you are doing all at your own risk !!!
I am not resposible if you get a brick , or lose your data :angel:
For more cleary Your ROM is now instaled by .zip file Used TWRP. If I try normal start phone, system Ask me about password. Watch this on My YT Channel:
https://youtu.be/1FIxZhyJ7jo
[email protected] said:
For more cleary Your ROM is now instaled by .zip file Used TWRP. If I try normal start phone, system Ask me about password. Watch this on My YT Channel:
https://youtu.be/1FIxZhyJ7jo
Click to expand...
Click to collapse
I understood
For removing password
--> Boot into TWRP
--> If prompts " device encryption " , tap on "Install"
(if the storage size is 0mb or no folder is showing while trying to install, then the device is encrypted. )
--> Go back in standart TWRP menu , from there click "Wipe" --> choose to " Format Data " and type " yes " and swipe to format . It's going to wipe EVERYTHING in the internal storage (that's the purpose of device encryption, to prevent unauthorized access to the storage).
--> When completed, go back, click "Reboot" --> "Recovery" , this will restart your recovery (very important, do not reboot the phone into system otherwise you'll start all over. Reboot into recovery, not system).
---> Now after TWRP rebooted , click "Install" > and select first the " EUI5.9 firmware and modem " and flash it , after that flash my EUI5.9 , after that you can root , suggest with Magisk .
The password will be removed , is from encrypted data partition
OK. I Have Your ROM
HOW I install your ROM ?
1. enter TWRP mode
2. Wipe all
3. Format
4. Copy Your .zip file into root directory on phone
5. Install your .zip file (without unpacking the zip file)
6. after install -> wipe dalvik cache
7. Reboot -> system
8. Phone start your ROM and standard welcome setings.
That's all -> without this procedure ->click "Install" > and select first the " EUI5.9 firmware and modem " and flash it , after that flash my EUI5.9
Did I do wrong?
[email protected] said:
OK. I Have Your ROM
HOW I install your ROM ?
1. enter TWRP mode
2. Wipe all
3. Format
4. Copy Your .zip file into root directory on phone
5. Install your .zip file (without unpacking the zip file)
6. after install -> wipe dalvik cache
7. Reboot -> system
8. Phone start your ROM and standard welcome setings.
That's all -> without this procedure ->click "Install" > and select first the " EUI5.9 firmware and modem " and flash it , after that flash my EUI5.9
Did I do wrong?
Click to expand...
Click to collapse
1. (If prompts " device encryption " , tap on "Install"
1.1 Go home ,after that to "Wipe" --> choose to " Format Data " and type " yes " and swipe to format . It's going to wipe EVERYTHING in the internal storage , an unencrypt your storage . after that click "Reboot" --> "Recovery" , this will restart your recovery (very important, do not reboot the phone into system otherwise you'll start all over. )
1.2 Now after TWRP rebooted :
Copy the ROM , and 21S_Firmware_&_Modem_x10.zip inside your internal memory
4. Flash the 21S_Firmware_&_Modem_x10.zip
5. Flash the ROM
6. After that you can root
***Suggest to root with Magisk
Do some research on youtube if still don't understanding
diamantik said:
1.2 Now after TWRP rebooted :
Copy the ROM , and 21S_Firmware_&_Modem_x10.zip inside your internal memory
4. Flash the 21S_Firmware_&_Modem_x10.zip
5. Flash the ROM
6. After that you can root
Click to expand...
Click to collapse
Rom has been installed correctly Everything works great, especially the sound
I installed everything according to your instructions.
Unfortunately, the phone still does not work in LTE B20 mode. On the second phone LTE B20 works without a problem. I can easily check this because in my area LTE is only using B20
Maybe there is another version of the 21S_Firmware _ & _ Modem_x10.zip which supports B20?
[email protected] said:
Rom has been installed correctly Everything works great, especially the sound
I installed everything according to your instructions.
Unfortunately, the phone still does not work in LTE B20 mode. On the second phone LTE B20 works without a problem. I can easily check this because in my area LTE is only using B20
Maybe there is another version of the 21S_Firmware _ & _ Modem_x10.zip which supports B20?
Click to expand...
Click to collapse
Flash this x10_AOSP.zip modem : https://drive.google.com/file/d/14k-JYlJ0If6TFC5WjAbkC4h94GPcVIuu/view
Maybe this will fix the problem .
If not , i will not can help , maybe ask @moto999999
Also if with the new firmware , the rom make troubles , flash again the 21S_Firmware _ & _ Modem_x10.zip .
I have not tried this firmware
diamantik said:
Flash this x10_AOSP.zip modem : https://drive.google.com/file/d/14k-JYlJ0If6TFC5WjAbkC4h94GPcVIuu/view
Maybe this will fix the problem .
If not , i will not can help , maybe ask @moto999999
Also if with the new firmware , the rom make troubles , flash again the 21S_Firmware _ & _ Modem_x10.zip .
I have not tried this firmware
Click to expand...
Click to collapse
without success , the phone still can not see LTE B20
[email protected] said:
without success , the phone still can not see LTE B20
Click to expand...
Click to collapse
Well i don't have other modem.
Try with the EUI6 modem
Do you know if that's ok with your rom if I'll freeze apps from ant07 list here ?
some screenshots please!!!!!!!
diamantik said:
Well i don't have other modem.
Try with the EUI6 modem
Click to expand...
Click to collapse
I cannot download any app from the play store over mobile network. I mean it doesn't allow me to download and install or update anything from the google store. The system is waiting for WiFi. I'm I doing something wrong?
Bootloader is unlocked, TWRP installed, flashed your rom according to your instruction. No settings were changed yet. Google store settings checked for ability to download over any network. Any suggestions?
Plastic8 said:
I cannot download any app from the play store over mobile network. I mean it doesn't allow me to download and install or update anything from the google store. The system is waiting for WiFi. I'm I doing something wrong?
Bootloader is unlocked, TWRP installed, flashed your rom according to your instruction. No settings were changed yet. Google store settings checked for ability to download over any network. Any suggestions?
Click to expand...
Click to collapse
Firstly , yes you can freeze the apps what you find in ROM .
You can Freeze this apps :
LeEco account
LeEco setup wizard
MyLeEco
LeTVEcoProvider
ANT HAL Service
Fido ( all 3 apps )
VCalendar
Market Feedback Agent,
Following Feed
Fast Transfer
Effect Service
Crash Handler
EuiTransfer.AppData
Bubbles
and AOSP keyboard , if you have Gboard , or another keyboard .
You don't need necessarily to freeze the apps , just make sure that you have the " Deep sleep tuner " flashed .
From my experince there is not a difference with the apps freezed or not . Maybe about 10 minutes of battery life more .
That is why i have not put an list before :laugh: . Also this list isn't interfering with any apps , or android UI from my experince . The ROM was debloated as much as i was able.
The second problem solution :
Open app " Downloads " --> 3 dot ( right up corner ) --> Settings --> Scroll up , until " No limit " , appears .
Select , and done , now clear cache for play store , and this is all , this should remove this inability