Database Users

[03 JAN]Rajko's CM 6.1[RMNET]

Almost stock CM6.1 with some usability apps
Kernel from latest git standard
Download: Link removed pending warez removal from ROM
This is the way to customize an official build to a hd2 nand build
No hackery, no tricks, the way its meant to be done
You can extract it alongside CM 6.1 for desire and do a folder diff to see how to adapt a desire ROM for the HD2
Basically what i used since 03. Oct for testing Magldr, continuously updated when a new CM release is out
Readme:
Code:
Rajko's CM 6.1 NAND ROM for HTC HD2
===========================
Based on CM 6.1 official stable for the HTC Desire.
This is a continuation of the NAND ROM i was making for earlier MAGLDR builds.
Very close to CM 6.1 stock, but added additional applications for convenience, these are:
- Wifi Manager
- Quadrant Benchmark Advanced
- TasKiller
- Network Speed
- Current Widget
- Market Enabler
All applications should be up to date as of 03.01.2010.
1. Installation
===============
MAGLDR 1.10 or newer is required on the device.
Before starting the installation process, enter "USB Flasher" mode on the device
by using the Volume rocker switch to select items and the green "Call" button as the Enter key.
2. Known issues
==============
Magnetometer left/right doesn't seem to be working. Don't know what broke this. Investigating.
Due to old QDSP, camera is still the stock 800x480 of HD2.
3. Post installation notes
==============
You can change the kernel to a newer/custom version by doing the following:
Connect via USB to your HD2 while Android is running.
Spawn an ADB shell
Do the following commands as superuser:
mkdir /tmp/boot
mount -t yaffs2 /dev/block/mtdblock0 /tmp/boot
After that, you can replace the zImage that's located in /tmp/boot
When you're done, you have to unmount the boot partition, like so:
umount /tmp/boot
Restart your device to use the new kernel.

well done Rajko, will try your build.
thanks!

please Screenshot Thanks

great! will try!

Oh, first one build for Jan 3
Downloading ....

I have try a bit.
Very fast build indeed
230 mb free storage
Mobile data ok
Wifi ok
Just see until now a issue, the phone dial, dont like i typing the numbers very fast, if i do that the dial freeze for a second and the call slow to start.
Aparte of that i like the build and Tomorrow will test more this baby.

awesome..will test it
but umm..hush..hush..you might wanna take out quadrant advance =P

the normal quadrant is useless because the cpu score varies so much, so the total score isnt really indicative of anything
with advanced people can compare the individual scores, the ones that matter like IO and 2D/3D

does this kernel include WiFi fix (dynamic mac address). what governer does it use?. What about after call 60mA issue?
just FYI, if you put quadrant advanced, the mods will remove links.

it's commit 4c31f2fb265ae68b82ed5e8ea4bec91208837011 so yes
60mA is because of too recent toolchain, that was never a problem with this as i used 2010q1 since forever
60mA may happen if GPS is on, turn it off using the power control widget when you don't need it

camcorder force close
anyone else having random force closes when running camcorder? camera itself runs ok when taking pictures though...
aside from above issue, the nand/build is running great
Also,
i seem to have forgotten how to enable volume control (when playing music) even when the screen is locked/turned off? I can't find it under cyanogenmod settings
thanks

rajkosto said:
Almost stock CM6.1 with some usability apps
Kernel from latest git standard
Download: http://rajko.info/cupcake/cm610_stable_hd2.7z
This is the way to customize an official build to a hd2 nand build
No hackery, no tricks, the way its meant to be done
You can extract it alongside CM 6.1 for desire and do a folder diff to see how to adapt a desire ROM for the HD2
Basically what i used since 03. Oct for testing Magldr, continuously updated when a new CM release is out
Readme:
Code:
Rajko's CM 6.1 NAND ROM for HTC HD2
===========================
Based on CM 6.1 official stable for the HTC Desire.
This is a continuation of the NAND ROM i was making for earlier MAGLDR builds.
Very close to CM 6.1 stock, but added additional applications for convenience, these are:
- Wifi Manager
- Quadrant Benchmark Advanced
- TasKiller
- Network Speed
- Current Widget
- Market Enabler
All applications should be up to date as of 03.01.2010.
1. Installation
===============
MAGLDR 1.10 or newer is required on the device.
Before starting the installation process, enter "USB Flasher" mode on the device
by using the Volume rocker switch to select items and the green "Call" button as the Enter key.
2. Known issues
==============
Magnetometer left/right doesn't seem to be working. Don't know what broke this. Investigating.
Due to old QDSP, camera is still the stock 800x480 of HD2.
3. Post installation notes
==============
You can change the kernel to a newer/custom version by doing the following:
Connect via USB to your HD2 while Android is running.
Spawn an ADB shell
Do the following commands as superuser:
mkdir /tmp/boot
mount -t yaffs2 /dev/block/mtdblock0 /tmp/boot
After that, you can replace the zImage that's located in /tmp/boot
When you're done, you have to unmount the boot partition, like so:
umount /tmp/boot
Restart your device to use the new kernel.
Click to expand...
Click to collapse
is step 3 necessary...wat does step 3 do??? and how do u perform step 3...i don't know "spawn an adb shell" means...and replace zimage in /tmp/boot with what???

Please can someone upload the CyanogenMod Wallpaper images of this Version ?
Or where I can find it with root explorer ?? Thanks

step3 is if you dont like my kernel, as it says in the readme.

is t-mobile US mms working?

rajkosto said:
step3 is if you dont like my kernel, as it says in the readme.
Click to expand...
Click to collapse
hahaha...i skipped that line...my bad...

is t-mobile US mms working?
Click to expand...
Click to collapse
does it work on cm6.1 on the bravo ? if so then it works here.

Yellowbrother said:
is step 3 necessary...wat does step 3 do??? and how do u perform step 3...i don't know "spawn an adb shell" means...and replace zimage in /tmp/boot with what???
Click to expand...
Click to collapse
Step 3 is for changing the kernel. This step is not required unless you are swapping kernels.

Upload is awfully slow compared to other nand build....I was getting avg of 1.5mbps.....with this build I get 400kbps...

cezzarmicu said:
anyone else having random force closes when running camcorder? camera itself runs ok when taking pictures though...
aside from above issue, the nand/build is running great
Also,
i seem to have forgotten how to enable volume control (when playing music) even when the screen is locked/turned off? I can't find it under cyanogenmod settings
thanks
Click to expand...
Click to collapse
Camera and camcorder ok....

[ROM][2.3.6] U8860 Modified Port

Disclaimer: I am not responsible for any damage (including, but not limited to, loss of data, non-functional device etc.) which may occur to your device from following the directions (or from any failure to follow the directions) found on this post. Use (and flash) at your own risk.
Credits go to genokolar for actually porting the U8860 2.3.6 firmware to the U8800Pro. This builds upon his port.
You may find his port announcement here, and you can download it from here. Thanks to user Skyline111 for the mirror.
Thanks also go to birdyi, who ported the U8860 2.3.6 firmware to the U8860. His port contained some brilliant things such as CarrierIQ framework removal.
--
This is a 2.3.6 ROM for the U8800Pro based on the U8860 B866 ROM. 2.3.6, naturally, brings a slightly newer version of Gingerbread compared to our 2.3.5 with B540. While I know it's all about CM9 (ICS), MIUI and so on these days, I'm a fan of stock (in the Huawei sense of the term) Gingerbread.
Features (or limitations depending on what you think of some of the following entries) of this ROM:
Rooted (adb also runs as root, too)
(Huawei) DLNA
(Huawei) A task manager that shows open applications with pictures (launching it when pressing Home has disabled in this modification because I found the Recent menu saves more time)
(Huawei) Security Guard, a way of hiding text messages, I think
(Huawei) Traffic Manager – a data counter
(Huawei) Wi-Fi WPS support
(Genokolar) FPS unlocked by default (configurable in enhanced.conf)
(Genokolar) ZRAM (Compcache) enabled
(Genokolar) Changed the autorun.iso path to the image partition so that formatting /data from CWM does not leave you with an empty CD-ROM drive when you plug the phone into a computer
bugreports service turned off entirely so that pressing the volume up button quickly after you've pressed volume down does not leave you with a few seconds' delay and a bugreports folder on your memory card
BusyBox from CM7
Android’s toolbox (poor coreutils replacement; more barebones than BusyBox) has its full set of links installed in /system/bin, so you use Android’s native chmod etc. tools. Why? To match the stock B512 firmware and to ensure developers testing on the U8800Pro correctly hardcode “busybox” in their root programs if needed
Optional lazy CPUfreq governor
Default language and region changed from Chinese – China to English – United Kingdom
Added in boombuler’s AppWidgetPicker
CM7’s Pacman added in to remind you to install Google Apps after adding an account with the Setup Wizard (make sure GApps is installed!)
VoiceDialler.apk added in from B512 firmware (although, to be honest, the microphone quality on my phone is awful…)
Bash shell, fix_permissions script, iwmulticall, MMS.apk, tcpdump and gdbserver and additional ringtones etc. from CyanogenMod (20120107-cm-7.1.0-u8800pro-Geno-en.zip) added in
Phone model changed to Desire HD, so Gameloft games can be bought. This may cause licensing problems with bought Market applications so be careful. (Although, I must admit that giving money to a company that doesn't support our phone seems counter-intuitive.)
Shutdown vibration reduced from 500ms to 100ms because I hate it (especially at night) but understand its usefulness in determining the answer to the question “Has the phone gone off yet?”
Huawei’s god-awful Low Battery notification replaced with a nicer one from CyanogenMod
Widgets actually restore themselves after a reboot! This was fixed by me replacing 2.3.6's PackageManager service with Huawei's 2.3.5 one.
MyCalendar widget from birdyi's port and MyEmail from B512 added in
Fixed proximity sensor dying if the light sensor was on, too.
Stripped down enhanced.conf - only swappiness, VSync and ZRAM settings available. I don't like /system/log.txt being created every time my phone boots and I think using a tool in Android like, say, No-frills CPU Control is the better place to set the frequency. SetXperia has support for setting the phone's CPU voltage.
More languages selectable from the Setup Wizard than just English (US) and Chinese.
Flash Player removed for copyright reasons. You can install it from the Market
Notepad and Richpad removed
Droid Sans Fallback supports more character ranges
Toolbox correctly has "Wi-Fi" instead of "WLAN"
Misc. kernel modules, like in B512, included
But I like the BusyBox tools and want to use them without having to prefix BusyBox everytime!
Just run the bash shell; BusyBox versions of cat, chmod, chown, df, insmod, ln, lsmod, mkdir, mount, mv, rm, rmdir, rmmod, umount, sleep, kill, and ifconfig will become the default while you’re using the bash shell (also nicer, BTW: you get tab-completion, for one) thanks to the CyanogenMod team.
Attempts to remove Carrier IQ. Huawei *do* include Carrier IQ in their firmware.
I’ve done the following to attempt to remove it the best I can:
Edited boot.img to not start Carrier IQ services
Removed Carrier IQ libraries from /system/lib and CiQ binaries from /system/bin
Added lines to build.prop to disable CarrierIQ, taken from the framework.jar file itself.
birdyi has also modified framework.jar to stop the CarrierIQ objects from being instantiated.
Ideally the best way to be Huawei-free is to use CyanogenMod.
I've removed the Cloud+ apps because of this. I've left some Huawei apps in, but I strongly recommend you install PDroid (the patcher works fine with this ROM) and block the more concerning permissions of Huawei system apps.
Kernel changes
Since the kernel genokolar provided with his port had a problem when a program used the light and proximity sensor at the same time – the proximity sensor would die out until the next restart – I took it upon myself to rebuild the kernel available from his github repository with the config from his latest kernel. After comparing his kernel to the source Huawei put out, I could see no code changes that would cause the proximity sensor to die out. Since I was rebuilding the kernel, I thought I’d make a few changes:
Add in the Lazy CPU governor by Ezekeel
Update a patch by stockwell to disable keypad lights (echo 1 > /sys/module/leds_msm_pmic/parameters/disable_button_leds) - use ButtonLock to control
Reverse genokolar’s decision to always allow NV logging – this can be turned on and off from the service menu on a stock ROM anyway…
Set minimum backlight level to 15, from Franco’s kernel. Warning: I haven’t tried setting it to 15 so I don’t know if that value renders the display practically useless, and I don’t know if Android lets you set it to 15 from its settings!
ButtonLock
Not as revolutionary as I'd like it to be, but useful nevertheless. I've written a quick widget, which looks like the Power Saving one, that turns off the button backlight. Useful for when you're reading books through FBReader.
You need to be using my kernel as it has the disable_button_leds patch. The advantage the disable_button_leds patch has over the chmod 444 method is that it doesn't introduce noticable lag. The widget's source is in the same folder.
When pressing the widget's button for the first time, there is a delay as the Superuser allow/deny dialog box takes its time to come up. After accepting, future launches are instantaneous.
If you need something that this ROM doesn’t provide compared to other stock ROMs, I recommend:
Not using it; or
Using a combination of diff, abootimg, Winmerge (or Beyond Compare) and apktool to compare this with genokolar’s original release, and with birdyi's ROM, and add what you want back in
Installation
Note: You must be running firmware version B522 on your device! If you have B540, you need to downgrade. If you have a firmware version lower than B522 (Froyo?), you must upgrade to B522 first. If you're already running a custom ROM, ignore this.
Take out the SIM card if you want the setup wizard to use Wi-Fi during setup.
Install genokolar’s recovery: http://forum.xda-developers.com/showthread.php?t=1343276
Place u8800pro-2.3.6-geno-v1-modified.zip on the internal memory card or an external one (I recommend the internal one to ensure you don’t run into U8800Pro CWM bugs with the external).
Get gapps for Gingerbread and place on your memory card. Find the link using every Android user’s favourite search engine.
I highly recommend using PDroid, but it’s up to you whether you want to use it. If you would like to use it, get the patcher from http://forum.xda-developers.com/showthread.php?t=1357056 and point it to u8800pro-2.3.6-geno-v1-modified.zip. Place the PDroid-v1.27-u8800pro-2.3.6-geno-v1-modified.zip file onto your memory card.
Boot into recovery (make sure that fast boot is turned off in Settings->Applications and hold power and volume up while turning the phone on)
Do a data/factory reset.
Install the ZIPs, starting with u8800pro-2.3.6-geno-v1-modified.zip (obviously).
Reboot!
Install the Google apps (those ones not included in CM's gapps ZIP like YouTube) if desired when prompted – but note that the Market will probably close as you’re doing this as it will automatically update itself.
Downloads
ROM: http://www.mediafire.com/?k0g17z1kraw7b67
SHA512: 4988B123488B8B24732401420DE849E8D8E5632C075A4520F176AA1D64DA0ECF946FF4D4E6CEC4D257EE4C4C999200A93C2CB309FD7B5FE50234A1C5700DEB2D
Modified kernel source (I suck at Git - I really need to read that VCS by Example book I have ): http://www.mediafire.com/download.php?a0022t73q2v7r7d
ButtonLock source (Apache licensed, though I must admit I'm more of a GPL person...): attached.
--
Extras:
genokolar's 5.0.27 recovery for the U8800Pro with the charging animations from https://github.com/Victor-android/android_device_huawei_u8800pro/tree/master/recovery/res/images:
attached.

Anyone tried it?
ill try it this evening I hope it fixes missed calls....
I have B512 official gingerbread, am I good to go?

Too times was a situation, when phone lost connection with wi-fi spot, he see the network, but can't connect. Help reboot.. else working so far without problems, testing..
...
turned off the wi-fi and got the main bug - does not work 3g/2g data transfer, hmm....

bobsido said:
with wi-fi spot, he see the network, but can't connect. Help reboot.. else working so far without problems, testing..
Click to expand...
Click to collapse
Interesting. I've had no problems reconnecting to a network that uses WPA2-PSK and another that uses 802.11x authentication.
turned off the wi-fi and got the main bug - does not work 3g/2g data transfer, hmm....
Click to expand...
Click to collapse
Are your APNs set correctly? In my case 2G works and I've had HSDPA working because when testing the Weather Clock widget (from B522, when I had it in) it would connect using it - I could see the icon in the status bar - and I had the pleasure of having my balance run down each time - I'm not a rich man
Edit: In build.prop, you can try playing with ro.config.hw_fast_dormancy=3 - genokolar had it set to 2, but I changed it back to 3 from the U8800Pro original ROM because I wouldn't be able to connect to my network otherwise.
Hopefully, it's not the case but it could be hardware differences. genokolar, who's work this is based on, being from China, probably has a Unicom U8800Pro, just like I do...
@Zaic
B512? This is for the U8800Pro. I'd advise you not to flash it. I'd recommend using birdyi's ROM. If you're after a certain improvement from this ROM, tell me and I'll try and isolate it for you (as long as it doesn't involve kernel stuff - I don't know how to build U8800 kernels) so that you can use with birdyi's ROM

I have u8800 pro - 100%
My ROM is original unrooted 2.3.5 B512 its one before the latest release which is B540
My ROM still has access to pink screen, otherwise its the same as B540 I guess
SO what should I do first to install this ROM? roll back to 2.2.2 or was it 2.2.3?

Ah, if you're running 2.3.5 already and in the pink screen mode you see a folder called image when connecting your phone to the computer you're ready to go

Hi!
My compliments for the porting of Android 2.3.6 to U8800Pro!
I am using your rom since yesterday and still now I am not having any kind of problems.
Anyway I notice the same bug of the B512 and B540 roms: put your smartphone on screenoff, then wait about 1 minute and fastly unlock the screen and try to pinch to zoom on the home. Sometimes the multitouch doesn't work on every position of your fingers, it only works correctly if your fingers are in the position of principal axes.
Please try to reproduce this bug.
I am using LauncherPro but this bug is indipendent by the launcher (for example I tried also Zeam Launcher, Go Launcher EX, etc etc).
I hope you can solve this bug, maybe kernel-related.
Regards,
kalo86

Hi,
kalo86 said:
My compliments for the porting of Android 2.3.6 to U8800Pro!
Click to expand...
Click to collapse
The honor is genokolar's
I am using your rom since yesterday and still now I am not having any kind of problems.
Click to expand...
Click to collapse
Thanks; it's nice to know that it's working OK on somebody else's device other than mine.
Anyway I notice the same bug of the B512 and B540 roms: put your smartphone on screenoff, then wait about 1 minute and fastly unlock the screen and try to pinch to zoom on the home. Sometimes the multitouch doesn't work on every position of your fingers, it only works correctly if your fingers are in the position of principal axes.
Click to expand...
Click to collapse
Sorry for asking, but how do you pinch to zoom on the home screen? I'm using Go Launcher Ex and I know that that has the swipe up gesture but I can activate that with one finger, anyway.
In any case, have you applied the Synaptics touchscreen update? For me it has increased the touchscreen performance greatly. I had one problem that when after unlocking, the touchscreen wouldn't respond unless I turned the screen off and tried again. The update solved that.
If you want to try it, open the service menu (*#*#2846579#*#*), go to ProjectMenu->Upgrade->Touch screen version query and see if it says "synaptics". If so, put the original Huawei recovery.img back on and put the synaptics.img file in a folder called update on your SD card. Use the recovery's "touchscreen firmware update" update option and it will automatically reboot when it's done.
Best regards,
qwerty12

Oh, really thank you for this "news" about the synaptics touchscreen update!
I have a synaptics too, then I am going to update the firmware.
Another bug, still present in B512, B540, Cyanogen and U8860 port: unplug your battery from the smartphone, insert it again, power on, then open your file manager and try to read the sdcard content. At 99% my sdcard is not read, then I have to reboot my U8800Pro and magically the sdcard is read.
Thanks to You and Genokolar for our development!
Regards,
kalo86
UPDATE: I updated the synaptics touchpanel but I have always the bug of multitouch. It is reproducible when you unlock the screen after a pause of 1 minute (about), then you open the stock browser and try to zoom with the multitouch. It works only if your fingers are on the principal axes and not in other positions. I have this bug on 4 different U8800 Pro! It cannot be a singular problem.
So, I have tried a lot of roms, based on B512, B540, U8860, CyanogenMod 7.1, I am sure I will try this bug on the next release because it's mabe a kernel bug due to the multitouch field.

Video demonstration
This is a video which I just uploaded on YouTube with the real multitouch bug.
This bug is in 4 different U8800 Pro.
http://www.youtube.com/watch?v=avSdW2V8TLg

kalo86 said:
Another bug, still present in B512, B540, Cyanogen and U8860 port: unplug your battery from the smartphone, insert it again, power on, then open your file manager and try to read the sdcard content. At 99% my sdcard is not read, then I have to reboot my U8800Pro and magically the sdcard is read.
Click to expand...
Click to collapse
I really can't reproduce this. I pulled out the battery while it was on, put it back in and started File manager (the one included with Huawei ROMs) and the internal SD card along with my external one were seen fine.
UPDATE: I updated the synaptics touchpanel but I have always the bug of multitouch. It is reproducible when you unlock the screen after a pause of 1 minute (about), then you open the stock browser and try to zoom with the multitouch. It works only if your fingers are on the principal axes and not in other positions. I have this bug on 4 different U8800 Pro! It cannot be a singular problem.
So, I have tried a lot of roms, based on B512, B540, U8860, CyanogenMod 7.1, I am sure I will try this bug on the next release because it's mabe a kernel bug due to the multitouch field.
Click to expand...
Click to collapse
Thanks for the video! Unfortunately I don't know how this can be fixed - I'm not a developer! It was only yesterday I tried looking in the driver to see how I can enable more than two finger recognition but I'm not seeing it...
Best regards,
qwerty12

Sorry for disturbing you, but I have a question: do you have the same bug of the multitouch after the lock-screen?
This is a second video about the same problem:
http://youtu.be/64NvbFJD3rs

qwerty12 said:
I really can't reproduce this. I pulled out the battery while it was on, put it back in and started File manager (the one included with Huawei ROMs) and the internal SD card along with my external one were seen fine.
Click to expand...
Click to collapse
The same here with sd,full power off device, power on then sd card is not mounted and cpu load is almost 100%. after restart or reinserting sd, problem just dissapear. on every rom i tried. i flashed official V100R001C00B512G001Gb (2.3.5) and then tried CM7; u8800+v100r001c00b540g001gb-rooted_geno-v4.

Is FM Radio working in this ROM?

Yes, Radio is working fine

qwerty12 said:
Are your APNs set correctly?
Click to expand...
Click to collapse
i fix APN settings and 3g/2g start work, thanks.. after reflashing wi-fi start work without problem. but after first reflash don`t work home button. they have response, but nothing happen. i secondary reflash phone, without wipe data/cash and home button start to work correct.. now tests are continuing

kalo86 said:
Sorry for disturbing you, but I have a question: do you have the same bug of the multitouch after the lock-screen?
This is a second video about the same problem:
http://youtu.be/64NvbFJD3rs
Click to expand...
Click to collapse
A little bit - after unlocking, I can do the multitouch gesture and phone will respond like it's supposed to but I have seen twice that it has not responded to me; I have to do it twice more...
Barracuda72 said:
Is FM Radio working in this ROM?
Click to expand...
Click to collapse
Like kalo86 said, it is indeed
bobsido said:
i fix APN settings and 3g/2g start work, thanks.. after reflashing wi-fi start work without problem. but after first reflash don`t work home button. they have response, but nothing happen. i secondary reflash phone, without wipe data/cash and home button start to work correct.. now tests are continuing
Click to expand...
Click to collapse
Please do let me know if you come across more problems

Zaic said:
Anyone tried it?
ill try it this evening I hope it fixes missed calls....
I have B512 official gingerbread, am I good to go?
Click to expand...
Click to collapse
So, any missed calls?

If someone wants to help the Community to understand the sdcard mount bug, please have a look here: http://forum.xda-developers.com/showthread.php?t=1483519
This is a poll, please vote!
Best regards,
kalo86

Zyzas said:
So, any missed calls?
Click to expand...
Click to collapse
Haven't had time to install this ROM yet.... but ill report as soon as I know

[Q] Sim card not found in roms cm9 L3

Hi,
I´m spanish and my sim card of Tuenti Movil don´t be detected for the phone and I haven´t got web but when I introduce the sim card of movistar the phone I have web and detecte it.
When I desactive the pIn code the phone detected the sim and I have got web but I haven´t got 3G.
Help me please.
Sorry for mi bad english.
Here are photos of jellycast V6 that is a rom based on cm9

mjgs17 said:
Hi,
I´m spanish and my sim card of Tuenti Movil don´t be detected for the phone and I haven´t got web but when I introduce the sim card of movistar the phone I have web and detecte it.
When I desactive the pIn code the phone detected the sim and I have got web but I haven´t got 3G.
Help me please.
Sorry for mi bad english.
Here are photos of jellycast V6 that is a rom based on cm9
Click to expand...
Click to collapse
r u using the right baseband (check the version number in about phone eg v10k and confirm it with lg firmware website just google it )if not then U have to flash your home country's or open europe's baseband via Kdz flasher then flash the jellycast...!

Problem
drkingtech said:
r u using the right baseband (check the version number in about phone eg v10k and confirm it with lg firmware website just google it )if not then U have to flash your home country's or open europe's baseband via Kdz flasher then flash the jellycast...!
Click to expand...
Click to collapse
I test many firmwares versions, I test open europe and firmwares of spain and always I have the problem.
The problem is in all roms based on cm9.
Sorry for my bad english

mjgs17 said:
I test many firmwares versions, I test open europe and firmwares of spain and always I have the problem.
The problem is in all roms based on cm9.
Sorry for my bad english
Click to expand...
Click to collapse
seems to be a odd problem did u try crossbreeder?
(this for the 3g btw)
http://forum.xda-developers.com/showthread.php?t=2113150

Problem
drkingtech said:
seems to be a odd problem did u try crossbreeder?
(this for the 3g btw)
http://forum.xda-developers.com/showthread.php?t=2113150
Click to expand...
Click to collapse
Thanks you but I dont understand well that is the crossbreeder my level of english isnt be very well and i dont understand this.

mjgs17 said:
Thanks you but I dont understand well that is the crossbreeder my level of english isnt be very well and i dont understand this.
Click to expand...
Click to collapse
just download cross breeder installer
http://forum.xda-developers.com/attachment.php?attachmentid=2086051&d=1372770386
crossbreeder uninstaller
http://forum.xda-developers.com/attachment.php?attachmentid=2086052&d=1372770386
copy them to the sdcard
go cwm wipe cache/dalvik cache install from sdcard-select the CrossBreeder_7.2.13.zip and flash it
reboot device
open the terminal emulator and type and check the codes given on the page
1. VALIDATION and TROUBLESHOOTING:
You can check your DNS boost functionality by running the following command:
Code:
getprop net.dns1
It should report 0.0.0.0
Then to verify Adblock you can select any one host from the blocked hosts file using the command:
Code:
tail /etc/CrossBreeder/dnrd_root/master
Pick one from there and browse to it in your browser. You should get a blank space
If you're experiencing any issues with your tethering, then you can first try and disable the tethering using:
Code:
su -c /system/etc/CrossBreeder/REMOVE_TETHER_BOOST
and rebooting.
You can re-enable it with:
Code:
su -c /system/etc/CrossBreeder/INSTALL_TETHER_BOOST
and rebooting.
Similarly if you're getting any issues with browser not reaching pages etc. then you can try and disable the entire DNS speedup functionality using:
Code:
su -c /system/etc/CrossBreeder/REMOVE_DNS_CLIENT
and rebooting.
You can re-enable it with:
Code:
su -c /system/etc/CrossBreeder/INSTALL_DNS_CLIENT
and rebooting.
Also of note is the Adblock feature. CrossBreeder now uses it's own Adblock file in /etc/CrossBreeder/dnrd_root/master ( NOTE - CHANGED FROM PREVIOUS VERSION). It also serves up these blocks in a clean blank format so you don't get an ugly 'Page not found' error instead of every ad. This is quite unique. If you want to disable Adblock to save around 3 MB of RAM on low end devices, you can run the command:
Code:
su -c /system/etc/CrossBreeder/DISABLE_ADBLOCK
You can re-enable it with:
Code:
su -c /system/etc/CrossBreeder/ENABLE_ADBLOCK
The biggest improvements are in general usability of apps, both local and network based.
2. You can check your entropy values with this tool:
http://play.google.com/store/apps/de...ndentropyavail
or use this method for more fine grained graphs: http://forum.xda-developers.com/show...php?p=38509664
You should get values moving to 4000 regularly with this mod.
Also of some use is this Lag Test app: Lag Test http://db.tt/eBHYJWYn ( Thanks MW86 ). This is for generally testing the CPU based GUI rendering functionality. The aim is to approach 60 fps, but there isn't a guaranteed correlation with CrossBreeder and your FPS result as of now. It is mostly related to your Governor but CrossBreeder certainly helps.
2. If for some reason, your entropy values aren't hovering around 4096 then the app most probably didn't start automatically. You can try and run it manually using:
Code:
su -c "/system/etc/CrossBreeder/zzCrossBreeder FORCE"
If the entropy values go up to around 4096 and stay there, it's working. CrossBreeder is now in it's separate directory and not dependent on your init.d support. You can make it run automatically on boot using an app like SManager from the Play store, just remember to check both 'BOOT' and 'ROOT' for the execution.
3. If you're still getting issues, you can run the collection script:
Code:
su -c /system/etc/CrossBreeder/CHECK_PROCS
(if it hangs you can close the window and run it again) and post the resultant /data/cb_CHECK_PROCS.log file here in this thread or anywhere else and post here pointing to it please. I will try to find a solution or post a bugfix soon.
You can also disable CrossBreeder if you have any problems using:
Code:
su -c /system/etc/CrossBreeder/DISABLE_CROSSBREEDER
4. If you tried (2) and (3) above and it still doesn't work for you or you would still like to uninstall the mod, then please flash the CrossBreeder_Uninstall.zip.
Click to expand...
Click to collapse
Hope u understand...cant get clearer than this lol..!

Problem
drkingtech said:
just download cross breeder installer
http://forum.xda-developers.com/attachment.php?attachmentid=2086051&d=1372770386
crossbreeder uninstaller
http://forum.xda-developers.com/attachment.php?attachmentid=2086052&d=1372770386
copy them to the sdcard
go cwm wipe cache/dalvik cache install from sdcard-select the CrossBreeder_7.2.13.zip and flash it
reboot device
open the terminal emulator and type and check the codes given on the page
Hope u understand...cant get clearer than this lol..!
Click to expand...
Click to collapse
Thank you I understand this

CS968 Exclusive MODDED ROM EQS-v2.0M 1080p

Exclusive MODDED ROM EQS-v2.0M
CS968 a RK3188 ChipSet Based TVBoX
AKA: TV01 [GeekBuying] CR11s [CloudNET2GO]
THIS VERSION HAS NATIVE 1080P KERNEL, NOT SAME AS V1.
IMPORTANT INFORMATION:
WE JUST LEARNED THERE ARE A FEW CS968/TV01/CR11s MODELS equipped with different WIFI/BT MODULES.
Thanks to dFenix we figured this out. [More info]
THIS ROM IS FOR AP6210 WIFI CHIP bundled devices, MAINBOARD VERSION 2.
So if you try this rom on other models you may loose your wifi connection.
Click to expand...
Click to collapse
IMPORTANT NOTICE:
THIS IS KIND OF BETA/ALPHA FIRMWARE OR WHATEVER YOU WANT TO CALL IT.
CURRENTLY I HAVE EXPERIENCED NONE PROBLEM AND IT SEEMS EVERYTHING INCLUDING 1080P MODE WORKS FINE.
THIS IS AN EXCLUSIVE ROM BECAUSE THERE ARE A FEW THINGS FACTORY FIRMWARE HAS NOT.
SYSTEM IS SAME AND NOTHING HAS BEEN MODIFIED EXCEPT SUPERUSER and BUILD.PROP, SO IF THERE IS A BUG THEN THAT IS FIRMWARE RELATED THIS ISN'T SUPER DUPER FIRMWARE AND DOESN'T HAVE SPECIAL KERNEL OR RECOVERY, EVERYTHINGS IS STOCK.
NOTE : LIBMEDIA.SO REPLACED, READ BELOW...
Factory Date : 09-12-2013 from CloudNET based CR11/s
Modification Date: 21-12-2013
NOTICE: THIS IS FOR 2 MPX VERSION, NOT FOR 5 MPX
You may harm your device, if you flash this firmware to 5 mpx camera version.
LCD Display density has been set to 240, if you need smaller icons and texts you can easily change by using preinstalled DPI changer program (May need root permission after first start).
Features:
Rooted [ You may notice a bit difference than v1 version, but it is normal ]
Build tweaks
TCP Tweaks (Buffering etc...)
Networking Tweaks
Wifi Tweaks (Signal etc...)
Multimedia Tweaks
Streaming Tweaks
HW Video Acceleration by default
Spoofed as Galaxy S3
Date format set to European
Timezone Europe GMT +1
Renewed bootanimation
Renewed wallpaper
Add: SuperSU.apk (Updated)
Add: LuckyPatcher (Updated)
Add: RootBrowser (NEW)
Add: OGYoutube with downloader [ Original YouTube still can be apartly installed ]
Add: Dolphin Browser 10.1.2
Add: Android Weather
Add: JetAudio
Add: Blueput Droid (NEW)
Add: Texdroider DPI (NEW)
Add: BSPlayer FREE (NEW)
Add: Cifs Manager (NEW)
Add: ESFile Explorer (NEW)
Add: Patched Libmedia.so (Many thanks hillyu from FreakTab, More info)
Updated : AddAway (Update)
Removed : All of useless chinese media stuff
Removed : Chrome
Removed : Search Box
Removed : Google Stuff (Search, maps, gmail, talk)
Removed : Email
Removed : XBMC Installer (Not everyone's taste)
Removed : A few more crap...
Exclusive test modules : Tun, Cifs*, NFS, NTFS and Xpad these modules are not installed by system, must be done manually from console/terminal.
Included CIFS MANAGER can do it for you, you don't need to install from terminal.
Exlusive bootanimation (Renewed)
Good working Remote Control.
Faster Internet browsing, smoother streaming, Very nice playing 1080p media from NAS DRIVE
*: It seems cifs module won't work properly, it is interesting because it was allright with K-R42 device but I'll search for it.
v2.0M CHANGES
NEW*: MultiWindow
*Needs Xposed Framework to be installed completely.
NEW*: Xposed Framework Installer
*Installation must be done via program self, then after reboot you may download modules as much as you want
REPLACED : BSPLAYER-> MX PLAYER FREE - No Codec pre-installed
REMOVED : JETAUDIO
UPDATE : LUCKY PATCHER, ADAWAY
UPDATE : DOLPHIN BROWSER 10.2.1
Re-Add : RKVideo player, RKExplorer
A few fixes that causes problems.
More optimized video playback (about 40 mbps mkv from network drive), more stable system.
LCD Density set to : 160 (Smaller icons and texts by default)
A little bit faster than 2.0 version.
Feel free to test or build new one, no words for future updates or versions etc.
FLASH WITH YOUR OWN RISK, I'M NOT RESPONSIBLE FOR ANY DAMAGE CAUSED BY FLASHING OR AFTER.
AnTuTu Results
Devhost / Mirror
password : cs968eqs
Firmware flashing guide.
[ HD QUALITY BOOT ANIMATIONS... ]http://forum.xda-developers.com/showthread.php?t=2612221

hi
Hi Equancy,
Is a small community of CS968 users here: freaktab.com/forumdisplay.php?165-CS968-CR11s-amp-similar-sticks
Would you like to share this rom there too?

fakotibor said:
Hi Equancy,
Is a small community of CS968 users here: freaktab.com/forumdisplay.php?165-CS968-CR11s-amp-similar-sticks
Would you like to share this rom there too?
Click to expand...
Click to collapse
Hi,
Yeah, it seems not much users have CS968 here in XDA but, I'm a member of XDA-Dev and I share what I have here, but you may share this thread on freaktab as yours if you wish.
I have no account on FreakTab and I don't think I may able to manage this thread on multiple forums.
So, I can answer questions only here and also publish updates of my rom.
Thanks for your interest.

Hi Equancy, I cant download this file.
(Error no: 1) Connection failure : User 'proxy_iamheman' has exceeded the 'max_user_connections' resource (current value: 10)
What seems to be the issue. please fix the link. Thanks.

resansid said:
Hi Equancy, I cant download this file.
(Error no: 1) Connection failure : User 'proxy_iamheman' has exceeded the 'max_user_connections' resource (current value: 10)
What seems to be the issue. please fix the link. Thanks.
Click to expand...
Click to collapse
Try primary download host (Devhost), its working flawlesly.
I guess mirror host has problem rightnow.
I've uploaded another Mirror-link working well.http://www.filedropper.com/showdownload.php/cs968051213eqsv2m

EQUANCY said:
Try primary download host (Devhost), its working flawlesly.
I guess mirror host has problem rightnow.
I'll make more mirrors soon.
Click to expand...
Click to collapse
OK This worked. Thanks.

resansid said:
OK This worked. Thanks.
Click to expand...
Click to collapse
Your welcome. :good:
Or you may try from here too.

@EQUANCY,
i tried your rom, looks good. few things are not wrking
1. xposed: i installed xposed framework, rebooted, then installed GravityBox, none of the tweaks in it wkrs. like transparent status bar/traffic meter.
after installing the GB and setting it up, i rebooted, but still not wrking.
2. window support is also not wrking. hv added some of the apps to wkr in window mode, but all run in full screen.
Have you tried these on ur rom ???

hanu_blr said:
@EQUANCY,
i tried your rom, looks good. few things are not wrking
1. xposed: i installed xposed framework, rebooted, then installed GravityBox, none of the tweaks in it wkrs. like transparent status bar/traffic meter.
after installing the GB and setting it up, i rebooted, but still not wrking.
2. window support is also not wrking. hv added some of the apps to wkr in window mode, but all run in full screen.
Have you tried these on ur rom ???
Click to expand...
Click to collapse
Yes,
Multi-window not working, but some features of Gravitybox well.
Actually I've put Multi-window by mistake, it was a bit late when I saw
However you may remove this app by following steps below.
1- Deactivate Multi-window app in Xposed modules menu (uncheck)
2- Reboot
3- Open RootBrowser and go to System/app directory
4- Long press on multi_window.apk and select Delete
I didn't tested all of modules and most of them are not working properly because of Tablet UI, I'll remove both application in next firmware mod.
Sorry for inconvenience, thanks for understanding.

Hi Equancy,
I am having issues with wifi direct. I can establish the wifi direct connection with the other device (Samsung Galaxy S3) just fine, I can send files from the box to the SG3, but I absolutely can't receive files sent from the SG3 to the box (I never even get the prompt).
I also tried to use the Superbeam app, and same story: I can send files out but not receive them.
Any clue? I am not sure whether this is specific to your ROM as I haven't tried with any other.
Cheers, Merry Christmas and Happy New Year to you.

daviddema said:
Hi Equancy,
I am having issues with wifi direct. I can establish the wifi direct connection with the other device (Samsung Galaxy S3) just fine, I can send files from the box to the SG3, but I absolutely can't receive files sent from the SG3 to the box (I never even get the prompt).
I also tried to use the Superbeam app, and same story: I can send files out but not receive them.
Any clue? I am not sure whether this is specific to your ROM as I haven't tried with any other.
Cheers, Merry Christmas and Happy New Year to you.
Click to expand...
Click to collapse
hi,
Thanks for your best wishes, hoping same for you.
For the issue,
Possible answer for WiFi Direct function is Firmware related, because I didn't touched any system file except su binary and build.prop.
I also tested by my self, receiving files from TVBox is working but transfering to the device isn't via SuperBeam.
As I said before, I suppose it is a firmware bug and must be reported.
And question is:
To who
However, you may ask other users who is using another firmware versions or custom roms.
Happy new years...

NFS help needed
I tried the rom on my cr11s and i must say its awesome except that its a bit slow.. i also can't get nfs to mount thru adb nor cifsmanager.. does the supplied nfs.ko support nfsv4? Everything else is working with no major issues.. thanks for the rom anyways...

PsychicSaint said:
I tried the rom on my cr11s and i must say its awesome except that its a bit slow.. i also can't get nfs to mount thru adb nor cifsmanager.. does the supplied nfs.ko support nfsv4? Everything else is working with no major issues.. thanks for the rom anyways...
Click to expand...
Click to collapse
It is very little bit slower than v1.1 but its not really noticable on 2D applications, can you specify what have you experienced actually?
I'm using a NTFS formatted NAS drive with no problem, even watching MKV files about 40-50 mbps rate. (NetGear ReadyNAS).
All of thoose modules have been supplied but not loaded by default need manually installed or you must add lines to the init.rc from system.
This can't be automatically because Kernel needs to be modified and I don't want to do that.
NFS module is actual module for RK3188.
If you more specify problem may be I can look it for you.
And for your consideration...
Some issues are FIRMWARE RELATED, because these firmwares aren't fully optimized, just generic RK3xxx roms.
Not good drivers at all...
And not all manyfacturers optimizes their own firmwares.
Produce and forget policy.

EQUANCY said:
hi,
Thanks for your best wishes, hoping same for you.
For the issue,
Possible answer for WiFi Direct function is Firmware related, because I didn't touched any system file except su binary and build.prop.
I also tested by my self, receiving files from TVBox is working but transfering to the device isn't via SuperBeam.
As I said before, I suppose it is a firmware bug and must be reported.
And question is:
To who
However, you may ask other users who is using another firmware versions or custom roms.
Happy new years...
Click to expand...
Click to collapse
I sent a email to cloudnetgo support, let's see what comes out (probably nothing...)

daviddema said:
I sent a email to cloudnetgo support, let's see what comes out (probably nothing...)
Click to expand...
Click to collapse
You've done very well my friend, please let us know if you get an answer from them.

EQUANCY said:
You've done very well my friend, please let us know if you get an answer from them.
Click to expand...
Click to collapse
I also tried to get screen mirroring to work with the wifidisplay app included in the ROM (is this also part of the original image or did you add it?).
Again, I can set up the mirroring connection between a Samsung Note 3 and the wifidisplay app, but then actual mirroring never happens. I suspect that whatever causes wifi direct not to work also causes the mirroring not to work... pity as this is would be a nice feature...

@EQUANCY,
I have a strange issue related to sound settings, its because of the stock firmware issue, hope you give some pointers on this
in the sound devices settings, there is input sound device and o/p sound device. I understand abt the output sound device, but what is the use of input sound device ? and is by default always set. Is there a way to disable the i/p device ?.
I ask this bcasue, my sound bar sony will cutoff the sound to other devices if the cs968 device is switched-off, if in on/standby mode, the sound passthorough (via cs968 )for other devices i hv connected to my soundbar. My guess is that since sound input device is checked(Radio button on), sound bar thinks that it has to pass through cs968. If i unplug the hmdi cable from cs968, the soundbar wrks fine.
My guess is that somewhere in the settings xml file, there shd be a way of disabling the sound input device.
I tried decompiling settings.apk and settingsprovider.apk searched all file with sound as filecontent key, but could not find anything related to disabling of sound input device.
can you help me on this ???

daviddema said:
I also tried to get screen mirroring to work with the wifidisplay app included in the ROM (is this also part of the original image or did you add it?).
Again, I can set up the mirroring connection between a Samsung Note 3 and the wifidisplay app, but then actual mirroring never happens. I suspect that whatever causes wifi direct not to work also causes the mirroring not to work... pity as this is would be a nice feature...
Click to expand...
Click to collapse
Wifi Display part of firmware self, I didn't add by myself and yes it is not working properly, I've read at somewhere this application supports only Nexus devices but I'm not sure.
hanu_blr said:
@EQUANCY,
I have a strange issue related to sound settings, its because of the stock firmware issue, hope you give some pointers on this
in the sound devices settings, there is input sound device and o/p sound device. I understand abt the output sound device, but what is the use of input sound device ? and is by default always set. Is there a way to disable the i/p device ?.
I ask this bcasue, my sound bar sony will cutoff the sound to other devices if the cs968 device is switched-off, if in on/standby mode, the sound passthorough (via cs968 )for other devices i hv connected to my soundbar. My guess is that since sound input device is checked(Radio button on), sound bar thinks that it has to pass through cs968. If i unplug the hmdi cable from cs968, the soundbar wrks fine.
My guess is that somewhere in the settings xml file, there shd be a way of disabling the sound input device.
I tried decompiling settings.apk and settingsprovider.apk searched all file with sound as filecontent key, but could not find anything related to disabling of sound input device.
can you help me on this ???
Click to expand...
Click to collapse
Disabling sound input?
As much as I know, the only sound input is internal microphone.
I real don't know the other sound inputs and als no clue about disabling it.
If you mean sound output such as Analog, Optical and HDMI then may be there is option but for input, I have no idea.
Sorry.

Uninstall Apps
How can I unistall app like bsplayer?
Thanks

Hi,
Open RootBrowser (usually opens in main directory) if not then got to Main Directory first then next to
\System\App
And long press the application which you want to remove and select Delete.
Or download a root uninstaller from market then uninstall what you want.
Hope this helps.

Enabling The Double Tap To Wake Up in Lineage OS and Resurrection Remix

Hi guys;
I found a way to enable the double tap to wake up in LineageOS and RR for the mi mix.
Here it comes:
1: Donwload the Root Explorer and the QuickEdit;
2: With Root Explorer, go to sys/bus/i2c/12-0038/wakeup-mode;
3: Open that with Quick Edit and change the value "0" to "1";
4: Save it;
5: Have fun.
This is my first post here, take easy guys. I searched here for a solution for this problem, but didn't find anything about this two roms.
Thanks if it works!
PS: The only problem is that when you reboot the system, the system automatically returns to "0", so you will have to do the whole process again every time you restart the device. Does anyone know the solution to leave this fixed by default?

I'll add that to init process in ramdisk and enable it in source again. In build 0412 it is disabled, but it seems to work anyway Thx for finding it out.

pappschlumpf said:
I'll add that to init process in ramdisk and enable it in source again. In build 0412 it is disabled, but it seems to work anyway Thx for finding it out.
Click to expand...
Click to collapse
No problem! This is a tweak that I cant live without! And, congratulations for the amazing job. The ROM is perfect to me, Im using as my daily driver. The only 2 problens that I found, is this one and the low volume in Calls. Thanks to provide this ROM, I really appreciated.

Great! Is working fine...

Hello ,
works fine , but after reboot it is back to"0"
mfg , hjf

hjfisch said:
Hello ,
works fine , but after reboot it is back to"0"
mfg , hjf
Click to expand...
Click to collapse
As I said

Couldn't i just change the value and save the file as read only? I'm kind of afraid to try it out but wouldn't that work?

Blackphantom said:
Couldn't i just change the value and save the file as read only? I'm kind of afraid to try it out but wouldn't that work?
Click to expand...
Click to collapse
Will work. Just change the value to 1, save and exit. But, every time that you reboot the device, u will need make the process again.

I understand that. My question was if i save the file as read only wouldn't that "deny" the system from changing the value even after rebooting?

Blackphantom said:
I understand that. My question was if i save the file as read only wouldn't that "deny" the system from changing the value even after rebooting?
Click to expand...
Click to collapse
Dont know. Could you try and post the result?

Blackphantom said:
I understand that. My question was if i save the file as read only wouldn't that "deny" the system from changing the value even after rebooting?
Click to expand...
Click to collapse
NO, as /sys is just a mountpoint for a virtual Filesystem (type sysfs)
So basically, everything under /sys/ is virtual, so no real Files, so no persistance after a reboot. At least not by interacting with sysfs.
This is the Linux way of making runtime live adaptations of certain hardware or software features.
Let me give you an example.
On a regular Dektop-Linux, if you do:
>> echo "1" > /sys/block/sda/device/delete
on the command line, you tell the kernel to flush the caches of the sda disk and spin it down. (so you could safely hotswap)
and if you do not replace your disk, but now want to get that disk spinning again, you put:
>> echo "0 0 0" > /sys/bus/scsi/devices/host1/scsi_host/host1/scan
into console.
So some of the Files there are read only (in like nothing happens when you change the content) , and others can be tampered with, but every change is gone after reboot.
except when you can manage to let some startup-skript make those changes, or you can edit the kernel-source default initialisation variables.

rootgremlin said:
NO, as /sys is just a mountpoint for a virtual Filesystem (type sysfs)
So basically, everything under /sys/ is virtual, so no real Files, so no persistance after a reboot. At least not by interacting with sysfs.
This is the Linux way of making runtime live adaptations of certain hardware or software features.
Let me give you an example.
On a regular Dektop-Linux, if you do:
>> echo "1" > /sys/block/sda/device/delete
on the command line, you tell the kernel to flush the caches of the sda disk and spin it down. (so you could safely hotswap)
and if you do not replace your disk, but now want to get that disk spinning again, you put:
>> echo "0 0 0" > /sys/bus/scsi/devices/host1/scsi_host/host1/scan
into console.
So some of the Files there are read only (in like nothing happens when you change the content) , and others can be tampered with, but every change is gone after reboot.
except when you can manage to let some startup-skript make those changes, or you can edit the kernel-source default initialisation variables.
Click to expand...
Click to collapse
Yeah that makes sense. I tried it and realized that it was set back to zero every time i restarted so i figured it would be something like that. Luckily DT2W works now in the build so we don't have to do that anymore.
Thanks for the explanation though. Really appreciated.

Hey there
i followed your steps but i cant seem to find the 12-0038 folder after i2c. Any thoughts?

If you're using Lineage just install the DragonXiaKernel. Double Tap To Wake is working fine.

Tiago A said:
Hi guys;
I found a way to enable the double tap to wake up in LineageOS and RR for the mi mix.
Here it comes:
1: Donwload the Root Explorer and the QuickEdit;
2: With Root Explorer, go to sys/bus/i2c/12-0038/wakeup-mode;
3: Open that with Quick Edit and change the value "0" to "1";
4: Save it;
5: Have fun.
This is my first post here, take easy guys. I searched here for a solution for this problem, but didn't find anything about this two roms.
Thanks if it works!
PS: The only problem is that when you reboot the system, the system automatically returns to "0", so you will have to do the whole process again every time you restart the device. Does anyone know the solution to leave this fixed by default?
Click to expand...
Click to collapse
I installed "lineage-14.1-20170415-UNOFFICIAL-X3". I only get path till sys/bus/i2c/
There is no 12-0038/ folder. Can you help me out on this? I need it badly.

same here, no 12-0038
running smooth with 14.1-20170725-NIGHTLY-hammerhead though

Same for me on 14.1 LG g4 can't t find the file

Ls .../i2c/devices/
0-0006
0-a004
0-a006
1-0051
10-0048
11-003b
...
There iz no 12-0038 in both /i2c/ and /i2c/devices/
:crying:

Vipxpert said:
Ls .../i2c/devices/
0-0006
0-a004
0-a006
1-0051
10-0048
11-003b
...
There iz no 12-0038 in both /i2c/ and /i2c/devices/
:crying:
Click to expand...
Click to collapse
DT2W is working in RR (Oreo) just fine and I assume it's the same for Lineage 15.1 (Oreo). Which ROM are you using?

gavin19 said:
DT2W is working in RR (Oreo) just fine and I assume it's the same for Lineage 15.1 (Oreo). Which ROM are you using?
Click to expand...
Click to collapse
RR oreo as u said !