I am from India. I have installed latest stock firmware downloaded from sammobile.
PDA: I9500XWUBMG5
CSC: I9500ODDBMG5
MODEM: I9500DDUBMF8
Now message appears that no registered network found. I think my IMIE no. has been changed. But unfortunately I have no back of the same. In this case what can I do?
Please help me.:crying::crying::crying::crying:
Can u see your IMEI in settings?
Sent from my GT-I9500 using Tapatalk 4
ketan_naik said:
I am from India. I have installed latest stock firmware downloaded from sammobile.
PDA: I9500XWUBMG5
CSC: I9500ODDBMG5
MODEM: I9500DDUBMF8
Now message appears that no registered network found. I think my IMIE no. has been changed. But unfortunately I have no back of the same. In this case what can I do?
Please help me.:crying::crying::crying::crying:
Click to expand...
Click to collapse
Try flashing an older modem, that helps recovering the Imei folder. See my signature item 3 for all available modems.
Related
Hey people
i recently purchased a note 3 off ebay which works fine for me in the UK, however the only problem i have is the phone is flashed with chinese firmware. i basically want to reflash the firmware to the uk BTU firmware. i have downloaded
SM-N9005 Galaxy Note 3
PDA: N9005XXUBMJ3
CSC: N9005OXABMJ3
MODEM: N9005XXUBMJ2
from sammobile.
but for some reason when going to flash in Odin, it ends up with a fail error saying the image4 invalid.
Could someone please point me in the direction to fix this?
Thanks
jeezy85 said:
Hey people
i recently purchased a note 3 off ebay which works fine for me in the UK, however the only problem i have is the phone is flashed with chinese firmware. i basically want to reflash the firmware to the uk BTU firmware. i have downloaded
SM-N9005 Galaxy Note 3
PDA: N9005XXUBMJ3
CSC: N9005OXABMJ3
MODEM: N9005XXUBMJ2
from sammobile.
but for some reason when going to flash in Odin, it ends up with a fail error saying the image4 invalid.
Could someone please point me in the direction to fix this?
Thanks
Click to expand...
Click to collapse
i think it means that firmware is not compatible ,but i may be wrong
jeezy85 said:
Hey people
i recently purchased a note 3 off ebay which works fine for me in the UK, however the only problem i have is the phone is flashed with chinese firmware. i basically want to reflash the firmware to the uk BTU firmware. i have downloaded
SM-N9005 Galaxy Note 3
PDA: N9005XXUBMJ3
CSC: N9005OXABMJ3
MODEM: N9005XXUBMJ2
from sammobile.
but for some reason when going to flash in Odin, it ends up with a fail error saying the image4 invalid.
Could someone please point me in the direction to fix this?
Thanks
Click to expand...
Click to collapse
I started a simlar thread a few days back asking similar question. I am trying to flash ROM from different region and without success. so far no one has replied a way to do it. I have Vodafone ROM on my N9005 and I have managed to flash it with BTU ROM but not TGY ROM. Apparently any european ROM I can probably flash but not asia. So you is the other way round.
I have a
SM-N9005 Galaxy Note 3
PDA: N9005XXUENA6
CSC: N9005OLBENA2
MODEM: N9005XXUENA2
I wanted to know if i can flash a tmoblie modem from the U.S without bricking the phone?
anyone?
xavier55 said:
anyone?
Click to expand...
Click to collapse
One day I was installing other region modem my efs got corrupted n bricked
Hi, my sm-n9005 not register on network.
It can't make calls or send messages but it can access the internet.
That's happened after I click the system update in the setting menu. now the imei showing in the status bar is different from the one on the back.
Is it the reason? is there anything to do with the so called regional lock??
Please help me.
I tried several sim cards, they all work fine on ohter phones but mine.
AP: N9005ZHUENH4
CP: N9005ZHUENH4
CSC: N9005ZZHENH4
I bought this phone in Hongkong, and now I am in Norway using telenor simcard.
richardbro said:
Hi, my sm-n9005 not register on network.
It can't make calls or send messages but it can access the internet.
That's happened after I click the system update in the setting menu. now the imei showing in the status bar is different from the one on the back.
Is it the reason? is there anything to do with the so called regional lock??
Please help me.
I tried several sim cards, they all work fine on ohter phones but mine.
AP: N9005ZHUENH4
CP: N9005ZHUENH4
CSC: N9005ZZHENH4
I bought this phone in Hongkong, and now I am in Norway using telenor simcard.
Click to expand...
Click to collapse
Original CSC : TGY
Product Code : NOT ACTIVE
PDA version : N9005ZHUENH4
CSC version : N9005ZHUENH4
Baseband version : N9005ZHUENH4
Android version : 4.4.2
refurbishment check: manufacturing date does not match with the serial number, knox warranty void status has been tripped.
made in vietnam
your mobile may flash with super with super imei, so while firmware update imei changed, did you purchased from authorised dealer in Hong Kong? Or threw online? If on line u may need to go mobile repair shop.
Sent from my SM-N9005
jdomadia said:
your mobile may flash with super with super imei, so while firmware update imei changed, did you purchased from authorised dealer in Hong Kong? Or threw online? If on line u may need to go mobile repair shop.
Sent from my SM-N9005
Click to expand...
Click to collapse
I bought it online. but in 100 km I can't find any samsung repair stores. There seems no samsung customer service center in Norway.
Samsung service center is not necessary, search for mobile repair shop near to you.
Sent from my SM-N9005
---------- Post added at 09:36 PM ---------- Previous post was at 09:34 PM ----------
Or try this from below link
http://forum.xda-developers.com/showthread.php?p=55426738
Sent from my SM-N9005
Its Region Locked to Hong Kong. That means it will only register on a network around Hong Kong territory. You will need to get a Region Unlock from Samsung to use it in Norway. On the side of the box it should have listed the countries your note 3 well work in. If norway was not listed then you can not register on any network in Norway. Contact Samsung
If u read op write about his phone imei number got changed after update, his phone may flashed with super imei for unlock region lock by seller.
Sent from my SM-N9005
Dizy801 said:
Its Region Locked to Hong Kong. That means it will only register on a network around Hong Kong territory. You will need to get a Region Unlock from Samsung to use it in Norway. On the side of the box it should have listed the countries your note 3 well work in. If norway was not listed then you can not register on any network in Norway. Contact Samsung
Click to expand...
Click to collapse
Hi, i had been using this phone in Norway from January without any problem. The problem appeared only a couple days ago after I updated some features. And later I couldn't make calls but I can get access the 4g internet using facebook or hangout, and surfing internet. I purchaced a 4g data package from telenor.
the imei has changed since I flash the stock rom from sammobile. now still I cannot call but can surf the internet.
richardbro said:
Hi, i had been using this phone in Norway from January without any problem. The problem appeared only a couple days ago after I updated some features. And later I couldn't make calls but I can get access the 4g internet using facebook or hangout, and surfing internet. I purchaced a 4g data package from telenor.
the imei has changed since I flash the stock rom from sammobile. now still I cannot call but can surf the internet.
Click to expand...
Click to collapse
What was your previous rom ? on which Sim was working?
Did you upgrade from 4.3 to 4.4.2?
MuhammadZeeshan7 said:
What was your previous rom ? on which Sim was working?
Did you upgrade from 4.3 to 4.4.2?
Click to expand...
Click to collapse
previous rom was 4.3, Hongkong. sorry I can't remember the exact info of the rom. I just left it not updated since I bought it in January.
The updates were some features, but not the system update. the version remained 4.3.
After the update I tried to flash a latest stock rom from sammobile to see if that would fix it, but still failed.
richardbro said:
previous rom was 4.3, Hongkong. sorry I can't remember the exact info of the rom. I just left it not updated since I bought it in January.
The updates were some features, but not the system update. the version remained 4.3.
After the update I tried to flash a latest stock rom from sammobile to see if that would fix it, but still failed.
Click to expand...
Click to collapse
Download and Flash this 4.3 modem for N9005: http://d-h.st/h6a
Flash this modem twice in Odin, by placing it in CP
MuhammadZeeshan7 said:
Download and Flash this 4.3 modem for N9005: http://d-h.st/h6a
Flash this modem twice in Odin, by placing it in CP
Click to expand...
Click to collapse
Thank you . I will try!! i will post the results as I done.
MuhammadZeeshan7 said:
Download and Flash this 4.3 modem for N9005: http://d-h.st/h6a
Flash this modem twice in Odin, by placing it in CP
Click to expand...
Click to collapse
even worse... it's become null/ imei now..
richardbro said:
even worse... it's become null/ imei now..
Click to expand...
Click to collapse
You should not flash modem randomly as it may brick your device.
As you device is HK version and the above modem is for N9005 International version, that modem is not fit for your device.
Didn't you have any IMEI backup?
If you don't have any IMEI backup, try to reflash the stock firmware for HK (not international one, as these versions have different PIT structures).
You cant just flash anything you find on Sammobile and expect for it to run perfectly. region locked or not. Because your phone was from Hong Kong you need to flash Hong Kong only firmwares nothing more nothing less. Flashing something not made for your region will change the IMEI. My friends did the same thing and his was also Hong Kong model. Tried everything to get it back but its pretty useless with out an EFS backup in hand.
Someone mentioned if you flash the original Firmware that came with the phone for the region it was made for it well bring your IMEI back. Give that a try. Give this a try.
HTML:
http://www.sammobile.com/firmwares/3/?download=34293
PDA: N9005ZHUENH4
CSC: N9005ZZHENH4
MODEM: N9005ZHUENH4
I have HongKong N9005 32GB too..
I didn't know anything about different partition so I flashed 4.4 from UK. And Soft Bricked my phone.
Then I used PIT file for international version and All the roms worked but Unknown baseband and Null IMEI.
Then I flashed UK rom and then Flashed modem from my previous android version.
That means, 4.3 version modem on 4.4.2 and baseband came back.
Repairing baseband is the very first step in repairing IMEI and network problems.
i bought n9005 with 4.3, then i flashed 4.4.2 on it, now IMEI unknown, NULL/NULL, Baseband UNKNOWN,
Please help me,
I have tried MODEM Change solution but not work for me
asif.malick said:
i bought n9005 with 4.3, then i flashed 4.4.2 on it, now IMEI unknown, NULL/NULL, Baseband UNKNOWN,
Please help me,
I have tried MODEM Change solution but not work for me
Click to expand...
Click to collapse
Did you flash the firmware that was incompatible with your device?
You didn't tell what is your original CSC and what is the CSC you are using to flash?
Try to reflash the stock firmware for your device.
Use Phone INFO ★Samsung★ app to know your CSC, and also to obtain the stock firmware for your device (Menu > 'Firmware Browser').
IMEI / Baseband null
vndnguyen said:
Did you flash the firmware that was incompatible with your device?
You didn't tell what is your original CSC and what is the CSC you are using to flash?
Try to reflash the stock firmware for your device.
Use Phone INFO ★Samsung★ app to know your CSC, and also to obtain the stock firmware for your device (Menu > 'Firmware Browser').
Click to expand...
Click to collapse
Yes firmware was OK, mk2 was old one on 4.3 with baseband mj9, right now after 4.4.2 MY CSC is ZZHENE3, what wil be the region for Pakistan,
asif.malick said:
Yes firmware was OK, mk2 was old one on 4.3 with baseband mj9, right now after 4.4.2 MY CSC is ZZHENE3, what wil be the region for Pakistan,
Click to expand...
Click to collapse
ZZH mean TGY, it is the CSC for Hong Kong firmware. This firmware is NOT compatible with all other version of Note 3.
If you don't know what is your original CSC, you can post all screenshots from the app, and we will try to guess it.
IMEI / Baseband null
vndnguyen said:
ZZH mean TGY, it is the CSC for Hong Kong firmware. This firmware is NOT compatible with all other version of Note 3.
If you don't know what is your original CSC, you can post all screenshots from the app, and we will try to guess it.
Click to expand...
Click to collapse
model: 9005
device type: hlte
product nam: hltezh
original csc code: xsi
firmware csc code: tgy
active csc code: tgy
csc country: HK
product code: NULL
IMEI: null
bootloader version: n900zhuene3
csc version: zzhene3
baseband version: null
asif.malick said:
model: 9005
device type: hlte
product nam: hltezh
original csc code: xsi
firmware csc code: tgy
active csc code: tgy
csc country: HK
product code: NULL
IMEI: null
bootloader version: n900zhuene3
csc version: zzhene3
baseband version: null
Click to expand...
Click to collapse
Can you capture all screenshots and post them here please? I need all screenshots for more detailed info.
IMEI / Baseband null
vndnguyen said:
Can you capture all screenshots and post them here please? I need all screenshots for more detailed info.
Click to expand...
Click to collapse
uploaded. please check
asif.malick said:
i bought n9005 with 4.3, then i flashed 4.4.2 on it, now IMEI unknown, NULL/NULL, Baseband UNKNOWN,
Please help me,
I have tried MODEM Change solution but not work for me
Click to expand...
Click to collapse
Hello, had same problem, as well and managed to fix it. Did you solve this?
To solve IMEI NULL (assume using stock ROM):
1. Download the modem from here: http://forum.xda-developers.com/showthread.php?t=2475714
2. Go to download mode
3. Open ODIN and flash the modem only.
asif.malick said:
uploaded. please check
Click to expand...
Click to collapse
OK, your device is international Note 3 and you have flashed firmware for Note 3 Hong Kong. These firmwares are not compatible to each other, so it did brick your device.
Your original CSC is XSI (United Arab Emirates)
Try to download stock firmware for XSI and reflash it using Odin or Kies.
To obtain download link, open 'Phone INFO ★Samsung★' app > Menu > 'Firmware Browser', enter XSI in the CSC textbox, press Go button to search and select the firmware to download.
Gud luck.
I went on this link
http://forum.xda-developers.com/galaxy-note-3/general/ref-galaxy-note-3-sm-n9005-gsm-modems-t2842806
and downloaded NG1 modem, that did the trick for me.
Hello
Since the release of kitkat I haven't been able to able update my device and I still have 4.3 version of android on my Note 3 SM-N9005.
Whenever I check for updates it says I have the latest and with kies it says the same thing or says SM-N9005 won't initialize. I heard that I can update manually with odin but I had some questions and fears:
First of all will flashing with odin trigger my knox counter and make it 0x1? I have the Knox app too and working with it keeping my secret information in it.
The other and the most important problem I have is that which frimware should I download? my baseband version is XXUBMI6, and my region (which I checked it from /system/csc/sales_code.dat) is XSI. I am a bit confused with all this stuff and don't know what to do
Thanks in advance for your help please tell me what to do.
mehrdady said:
Hello
Since the release of kitkat I haven't been able to able update my device and I still have 4.3 version of android on my Note 3 SM-N9005.
Whenever I check for updates it says I have the latest and with kies it says the same thing or says SM-N9005 won't initialize. I heard that I can update manually with odin but I had some questions and fears:
First of all will flashing with odin trigger my knox counter and make it 0x1? I have the Knox app too and working with it keeping my secret information in it.
The other and the most important problem I have is that which frimware should I download? my baseband version is XXUBMI6, and my region (which I checked it from /system/csc/sales_code.dat) is XSI. I am a bit confused with all this stuff and don't know what to do
Thanks in advance for your help please tell me what to do.
Click to expand...
Click to collapse
1. Flashing the correct firmware for your device via ODIN DON'T trig KNOX counter. Be relaxed.
2. One of the best method for know your CSC (code of country) is rebooting in STOCK RECOVERY and look close the text: "Applied the CSC-code: XXX" like in the pic attached.
mehrdady said:
Hello
Since the release of kitkat I haven't been able to able update my device and I still have 4.3 version of android on my Note 3 SM-N9005.
Whenever I check for updates it says I have the latest and with kies it says the same thing or says SM-N9005 won't initialize. I heard that I can update manually with odin but I had some questions and fears:
First of all will flashing with odin trigger my knox counter and make it 0x1? I have the Knox app too and working with it keeping my secret information in it.
The other and the most important problem I have is that which frimware should I download? my baseband version is XXUBMI6, and my region (which I checked it from /system/csc/sales_code.dat) is XSI. I am a bit confused with all this stuff and don't know what to do
Thanks in advance for your help please tell me what to do.
Click to expand...
Click to collapse
- Flashing the stock firmware via Odin will not trip the Knox counter, nor erasing your data.
- To find and download the correct firmware for your device:
Open Phone INFO ★Samsung★ app > Menu > 'Firmware Browser'.
The latest one will be on the top of the list.
vndnguyen said:
- Flashing the stock firmware via Odin will not trip the Knox counter, nor erasing your data.
- To find and download the correct firmware for your device:
The latest one will be on the top of the list.
Click to expand...
Click to collapse
Thank you for your help i installed the app and checked it the part you told (firmware browser)
at the top was a firmware with this info:
Model: SM-N9005
Model name: GALAXY Note 3 LTE
Country: United Arab Emirates
Version: Android 4.4.2
Changelist: 1955971
Build date: Tue, 28 Oct 2014 12:20:40 +0000
Product Code: XSI
PDA: N9005XXUGNJ2
CSC: N9005OJVGNH2
MODEM: N9005XXUGNG1
Im downloading it and going to flash it using the instruction written on the sammobile website, will flashing this firmware erase my apps? and I have seen some people that after using this method of flashing their device has lost connection of wifi and cell connection, what if I get this problem too?
mehrdady said:
Thank you for your help i installed the app and checked it the part you told (firmware browser)
at the top was a firmware with this info:
Model: SM-N9005
Model name: GALAXY Note 3 LTE
Country: United Arab Emirates
Version: Android 4.4.2
Changelist: 1955971
Build date: Tue, 28 Oct 2014 12:20:40 +0000
Product Code: XSI
PDA: N9005XXUGNJ2
CSC: N9005OJVGNH2
MODEM: N9005XXUGNG1
Im downloading it and going to flash it using the instruction written on the sammobile website, will flashing this firmware erase my apps? and I have seen some people that after using this method of flashing their device has lost connection of wifi and cell connection, what if I get this problem too?
Click to expand...
Click to collapse
Flashing a stock firmware via Odin will not erase your apps.
I personally doesn't face with wifi and cell connection.