Database Users

[Q] help me please!!!!!

ahhhhhhhh
how is this happening. my phone keeps going back to the same rom even though i have deleted the rom off of my sd card.
i need step by step instructions of hw to get rid of the rom for good and how to flash a new rom once that is done.
thank you :crying:

Boot into recovery.. clear data and cache.. get into cwm and delete data and cache again.. then select zip from SD card and flash the rom u want.. after its installed again clear data and cache and reboot.. u should be done..
Don't forget to hit thanks if this helps!
Sent from my GT-S5360 using xda app-developers app

whyyyyyyy
ive tried to reeboot into recovery but my phone just goes back to cwm 5

jubjubh said:
ive tried to reeboot into recovery but my phone just goes back to cwm 5
Click to expand...
Click to collapse
i think you flashed some kernel with cwm built in.try flashing your rom with odin. here's the thread read and follow the steps carefully. http://forum.xda-developers.com/showthread.php?t=1465800

Flash to stock rom using Odin

jubjubh said:
ive tried to reeboot into recovery but my phone just goes back to cwm 5
Click to expand...
Click to collapse
Dude if its reboots into cwm then its cool.. just wipe data and cache from there also wipe delvik cache from advanced option and then flash ur rom by selecting zip from SD card... or if u want ur stock rom back just go to backup/restore and restore ur nandroid backup.. (u did take one before flashing a custom rom, right???)
Sent from my GT-S6102 using xda premium
---------- Post added at 03:47 PM ---------- Previous post was at 03:46 PM ----------
If all this fails then reboot into Odin (using vol down + home + power key) and download stock rom and flash it...
Sent from my GT-S6102 using xda premium

Try mounting data in mounts and storage......i m sure it will help
Sent from my GT-S5360 using xda app-developers app

Stuck in a bootloop!

Just installed Hyperion via Clockwork Mode and I am stuck in a bootloop, could I get some help with this?

Install another rom or the same rom
By reading the installation instruction properly
Sent from my GT-S5360 using xda premium

flash stock Rom using Odin then flash Hyperion again properly or another Rom
This is how to flash stock Rom via Odin
http://forum.xda-developers.com/showthread.php?t=1465800
So 2 android phones walk into a bar

At first i also have bootloops, hmmm try to flash again the same ROM
But this time wipe data/cache in CWM and then boot into recovery then wipe data/cache again then flash

Boncey said:
Just installed Hyperion via Clockwork Mode and I am stuck in a bootloop, could I get some help with this?
Click to expand...
Click to collapse
*flash a stock rom
*wipe ur ext partition if u have it (using link2sd)
*then flash Hiperion
oh, it's you again u made it.

*flash with stock rom using Odin
*flash with CWM that Hyperion (read the instruction carefully on the Hyperion Thread)
goodluck

Did all of that before you guys said, still gives me a bootloop, do I need to root my phone? But, when I root it I can't mount /system or /data or the other one

Boncey said:
Did all of that before you guys said, still gives me a bootloop, do I need to root my phone? But, when I root it I can't mount /system or /data or the other one
Click to expand...
Click to collapse
use another cwm or try cwm_bla_bla.zip

Link meh?

Boncey said:
Link meh?
Click to expand...
Click to collapse
i dont have a link but use the xda search botton it will help u a lot.good luck.

Still nothing :l

STEPS TO FLASH HYPERION (worked for me 100%)
- Flash stock rom via odin
- Reboot and go to CWM
- Clear Data/Reset and Cache
- Mount System/Sdcard/Data/Cache, (Sometimes Data/Cache can't be mounted it is OKAY)
- Flash Hyperion
- DO NOT REBOOT YET
- Go to Advanced
- Boot to Recovery
- Clear Data
- Clear Cache
- Reboot
Try it
Sent from my GT-S5360 using xda app-developers app

Make sure you're in a stock kernel first.

@boncey
Try the instruction provided by jeannuel's
Its working....good
Sent from my GT-S5360 using xda premium

Can't flash JellyBlast ROM

I've tried twice, first time it went blank on boot up and I could only here tge boot sound. The second time it got stuck at the Samsung Galaxy Y logo.... I want this ROM ao bad. My phone has all tge requirements: rooted, has stock kernel etc.... And I follwed EVERY step correctly... What is the problem?
Sent from my GT-S5360 using Tapatalk 2

Mo0s said:
I've tried twice, first time it went blank on boot up and I could only here tge boot sound. The second time it got stuck at the Samsung Galaxy Y logo.... I want this ROM ao bad. My phone has all tge requirements: rooted, has stock kernel etc.... And I follwed EVERY step correctly... What is the problem?
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
Flash Stock ROM via ODIN (Let me know if you dont know what it is)
Put the ROM zip and Clockworkmod in the root of your SD card
Boot into Recovery(Three button combo)
Select apply update
Select the cwm file
Wipe data/factory reset
Wipe cache
Go to advanced
Wipe Dalvik cache
then select install zip from sd card
choose zip from SD card
let it install
Reboot
Report back here

tjsgy said:
Flash Stock ROM via ODIN (Let me know if you dont know what it is)
Put the ROM zip and Clockworkmod in the root of your SD card
Boot into Recovery(Three button combo)
Select apply update
Select the cwm file
Wipe data/factory reset
Wipe cache
Go to advanced
Wipe Dalvik cache
then select install zip from sd card
choose zip from SD card
let it install
Reboot
Report back here
Click to expand...
Click to collapse
Done.... Still stuck the Gakaxy Y logo
Sent from my GT-S5360 using Tapatalk 2

Before wiping data in CWM
Go to mounts and storage>check if "unmount system" is there. If its "mount system" select it and press the centre key which wil turn it to "unmount system".
Also wipe data and cache in stock recovery before going to CWM recovery.
Sent from my GT-S5360 using xda app-developers app

devilrulz4ever said:
Before wiping data in CWM
Go to mounts and storage>check if "unmount system" is there. If its "mount system" select it and press the centre key which wil turn it to "unmount system".
Also wipe data and cache in stock recovery before going to CWM recovery.
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Ok, can you please post an alternative link for the rom. I'm having problems downloading from the Mediafire link
Sent from my GT-S5360 using Tapatalk 2

http://www.mediafire.com/?m3cbyliuiek3cu3
Here was link Dude ...!!
Dont Waste Ur Time In Saying Thanks
Just Press It..!!

Cool.yash17 said:
http://www.mediafire.com/?m3cbyliuiek3cu3
Here was link Dude ...!!
Dont Waste Ur Time In Saying Thanks
Just Press It..!!
Click to expand...
Click to collapse
Does this one work?
Sent from my GT-S5360 using Tapatalk 2

I can flash jellyblast but im one the gt-5360T
can someone please explain how i can keep the autorotation from stock rom when i flash jellyblast

WEAREBORG2913 said:
can someone please explain how i can keep the autorotation from stock rom when i flash jellyblast
Click to expand...
Click to collapse
Auto rotation is already present in Jellyblast rom u can toggle it from status bar easily

funnypharmacist said:
Flash Stock ROM via ODIN (Let me know if you dont know what it is)
Put the ROM zip and Clockworkmod in the root of your SD card
Boot into Recovery(Three button combo)
Select apply update
Select the cwm file
Wipe data/factory reset
Wipe cache
Go to advanced
Wipe Dalvik cache
then select install zip from sd card
choose zip from SD card
let it install
Reboot
Report back here
Click to expand...
Click to collapse
I have the same problem and I followed the instructions on page 1 of the Jellyblast ROM exactly, also this one. After that I tried different ways with different CWM, choose an older version of the rom, reinstall Kuro Kernel after flashing Rom, delete second partition (ext2)... But I always get the bootloop.
Edit:
Solved: I made a stupid mistake. I chose on the download page the Update 5, because i thought it's the full ROM with update 5. Because of the green colour of the ROM download link, i didn't recognize that it's a link.

Help. Bricked found the cause

I feel my install storage is corrupted so rsd Is not able to flash things into internal memory. Whatever I flash, even a cmx sbf, I get the same stock android symbol and the checksum verification fails for all except cg31 and cg32. I need to reformat my internal memory before I flash .for the I need custom recovery. With a locked bl, internal memory is not formattable. Exactly my /system partition is corrupted. If there any update.zip which can format /system partition?
Sent from my C6602 using Tapatalk 4

Okay I ve found the options.
1. I need an update.zip which I need to use from stock recovery to format /system
Or
2. I need to format /system through rsd lite..or some other software similar to this? Is there Ny?
Sent from my C6602 using Tapatalk 4

pjgowtham said:
Okay I ve found the options.
1. I need an update.zip which I need to use from stock recovery to format /system
Or
2. I need to format /system through rsd lite..or some other software similar to this? Is there Ny?
Sent from my C6602 using Tapatalk 4
Click to expand...
Click to collapse
Flashing any SBF with RSD will fix your partitions; I know this because I've had damaged partitions before. I don't think a corrupt /system partition is your problem, I think your internal memory might be physically failing.

Why do I get the classic android boot animation whatever sbf I flash? A and I've seen many ppl complaining if boot looping after flashing a sbf if it formats partitions
Sent from my C6602 using Tapatalk 4

pjgowtham said:
Why do I get the classic android boot animation whatever sbf I flash? A and I've seen many ppl complaining if boot looping after flashing a sbf if it formats partitions
Sent from my C6602 using Tapatalk 4
Click to expand...
Click to collapse
I thought you said you weren't getting a boot animation and it was taking you straight to stock recovery? You're going to have explain yourself better. If you're getting a boot loop in the boot animation, and you can still access stock recovery, then through there wipe /data and /cache and it'll boot up. You almost always need to wipe /data after flashing an SBF.
I don't know if it formats partitions or not, I just know that it fixes them.

I ve tried sbf ing with both rsd and sbf flash in linux. Nothing worked.
Wherever sbf I flash, I get one same boot animation bootlooping.
The device fails on checksum verifications during flash. This tells the rsd has problems with internal memory.
If the internal memory has failed permanently, why would it read the bootanimation?.weird
Most probably its corrupted
Sent from my C6602 using Tapatalk 4

Antiga Prime said:
you can still access stock recovery, then through there wipe /data and /cache and it'll boot up. You almost always need to wipe /data after flashing an SBF.
.
Click to expand...
Click to collapse
Ive tried /data /cache wipe through stock recovery.
And defy doesnt flash properly. Every flash fails with checksum errors.
I thought I could access custom recovery if I flash fixed sbf with custom rom but defy acts like sbf is never flashed. Because if I access bootmenu, I can format system partition
Sent from my C6602 using Tapatalk 4

Dfp231 is worth a try
Sent from my MB526 using Tapatalk 2

thekguy said:
Dfp231 is worth a try
Sent from my MB526 using Tapatalk 2
Click to expand...
Click to collapse
Sure I'll try and let you know
Sent from my C6602 using Tapatalk 4

Bricked phone

Hello peeps I had weird prob in my phone before I install custom rom my phone keep restarts then I rooted phone and installed Hyperion rom but it's not booting what to do ? Is it ok to flash stock firmware via Odin or something pls suggest

daringsmart said:
Hello peeps I had weird prob in my phone before I install custom rom my phone keep restarts then I rooted phone and installed Hyperion rom but it's not booting what to do ? Is it ok to flash stock firmware via Odin or something pls suggest
Click to expand...
Click to collapse
-Wipe data/factory reset
-format system
-mount data, system and cache
-and then install it again!

lionelsuyog said:
-Wipe data/factory reset
-format system
-mount data, system and cache
-and then install it again!
Click to expand...
Click to collapse
I did but didn't worked btw do I need to use the temp cwm in Hyperion thread to flash Hyperion ROM ??
Sent from my Nexus 5 using XDA Premium 4 mobile app

daringsmart said:
I did but didn't worked btw do I need to use the temp cwm in Hyperion thread to flash Hyperion ROM ??
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yeah! You have to! And dont forget to mount data and system!
Stock recovery doesnot mount data!