Related
Hello,
yesterday i downloaded the official Windows Mobile 6.5.x Image of HTC in german!
First everything was fine! But then i noticed, if i leave the phone untouched, and the display gets dark, it shuts down!
First i thought, maybe there is something wrong with the energy settings, but some changes there didn't change anything!
At last i did a hard reset! It doesn't change anything, too :-(
Has anyone an idea, whats wromg with my phone?
Thanks,
Jan
jandb1980 said:
Hello,
yesterday i downloaded the official Windows Mobile 6.5.x Image of HTC in german!
First everything was fine! But then i noticed, if i leave the phone untouched, and the display gets dark, it shuts down!
First i thought, maybe there is something wrong with the energy settings, but some changes there didn't change anything!
At last i did a hard reset! It doesn't change anything, too :-(
Has anyone an idea, whats wromg with my phone?
Thanks,
Jan
Click to expand...
Click to collapse
This is referred to as the SOD (Standby of Death)
Some questions to consider;
Did you HSPL?,
If not, is your phone originally set up for German region?
My Phone is an original Vodafone german phone.
in october last year i installed the update of HTC, but the original, not the one of Vodafone, with HSPL i think!
And yesterday i downloaded the official new HTC ROM and did it the same way (both times i downloaded a single file)
Are there any solutions for the standby of death?
jandb1980 said:
My Phone is an original Vodafone german phone.
in october last year i installed the update of HTC, but the original, not the one of Vodafone, with HSPL i think!
And yesterday i downloaded the official new HTC ROM and did it the same way (both times i downloaded a single file)
Are there any solutions for the standby of death?
Click to expand...
Click to collapse
The cause has yet to be identified but it is likely some .dll not playing nice with the system.
Also, not sure if I've seen this on a stock ROM.
Go into bootloader and make sure you have HSPL installed. s/b 1.83.Olinex
Hm... i remember, there was written 1.83.Olinex!
How can i get into the bootloader?
jandb1980 said:
Hm... i remember, there was written 1.83.Olinex!
How can i get into the bootloader?
Click to expand...
Click to collapse
Instructions:
- Turn off your device using the power button
- When the device is turned off press simultaenously the volume down button + Power button
- Your device will startup in Bootloader mode
Maybe try to re-flash the ROM again.
Also, always hard reset after your flash
ok, thanks, i'll give it a try
i tell you tomorrow
OK, there is written:
TOPA100 32M
SPL-1.83.OliNex
MicroP-Topaz (LED) v 10
TURBO HW/TURBO SW
TP MFG DATA
499,548 170,882
176,207 834,210
826,886 Calibrated
I have found this too but the phone isn't completely dead. If I call my number from another phone it seems to wake the device up and allow me to use again
very frustrating though
Hey, about half an hour ago, i reinstalled HSPL 1.83.Olinex! Now it seems to be working normal! I can tell you tomorrow, if the problem is solved! I'll test the next 24 hours
So, til now i can tell you, that my problem, the standby of death is gone The reinstall of the Bootloader did it
Hello,
I have been reading quite a bit here including all the stuff about ensuring that I don't brick the phone and which roms to install etc. etc.
Anyhow, I couldn't find any detailed threads about folks who might've tried installing Android on stock windows.
I went ahead and tried using it today and android did load up fine. Everything seems to work perfectly. The only issue is that the dialer freezes when I am dialing numbers and I can't hear anyone and they can't hear me. So I will try another android flavor.
What I wanted to confirm was that if I am using Android on default windows, is there a chance I can brick my phone?
Any help is appreciated.
Thanks
Impossible to brick your phone because its just running off the mem card I've been running android on a stock rom for about a month now, just make sure you've got an appropriate radio version etc...
cool..thanks for your response..
also, what do you mean by the radio version? I basically installed, http:/ /forum.xda-developers.com/s howthread.php?t=740963
that's all i did. Do you mean to say I have to install a radio version separately?
Thanks
spoofy420 said:
cool..thanks for your response..
also, what do you mean by the radio version? I basically installed, http:/ /forum.xda-developers.com/s howthread.php?t=740963
that's all i did. Do you mean to say I have to install a radio version separately?
Thanks
Click to expand...
Click to collapse
What version of the HD2 do you have? T-Mobile US?
I used my stock UK O2 172. ROM
1st HSPL
2nd Updated Radio
3rd Loaded Darkstone Froyo
I haven't had any probs and android is running fine.
RReckless
Sent from my HanDroid2 using XDA App
rp-x1 said:
What version of the HD2 do you have? T-Mobile US?
Click to expand...
Click to collapse
I should've been more specific. Yes it is a tmobile US version.
I just recently go android working on my tmous phone using stock rom. I had to do the following to get it 100% functional
1) Install HSPL3 and flash the radio to version 2.12 (it actually said something like 2.08 in the HSPL app)
2) Flash to ChuckyROM lite
3) Copy darkstones Froyo 2.2 build to sd card
Thats it, everything works now. I had the same problems as you so I would take this route if I were you. Keep in mind that flashing to chuckrom is going to replace the windows theme you normally see when you start your phone. From there you can use the included Android launcher utility so you can then quickly boot up android instead of windows.
Personally I could care less what windows rom/theme is loaded since my goal is to convert to Android completely. Although I will say that I immediately noticed an improvent in windows overall thanks to the ChuckyROM tweaks. If you choose to run chucky isntead of android it's a nice breath of fresh air, much more responsive, faster, and logically laid out.
Couple of caveats:
1) Bluetooth phone use is a little wonky. For instance, sometimes when I'm streaming music to my car stereo and I receive a phone call, the mic shuts down and I cant place any more phone calls without rebooting, even though music streaming continues to function.
2) On occasion the touchscreen will lock up. All I have to do is hit the windows key to bring up a context menu and then close it, touchscreen starts responding again.
3) I've been running stable for 3 days, however the phone did reboot itself for no reason and get stuck once. I had to do a battery pull to boot back into chuckyrom/android.
All in all it's been a dream though and well worth the experience. Windows 6.5 is so utterly broken as a phone OS words cannot describe. I feel like I've been using Windows 3.1 on my PC compared to this. The few glitches in the Android ports are entirely worth the hassle, and very minor. And to think, it's only going to get better!
Hi all - I'm in a bit of trouble.
Tried changing the OS to Android and must have made a mistake somewhere along the line.
Was using ROM update utility MAGDLR V1.13 and got as far as updating the ROM Was told that the screen should go black and if it didn't, then I needed to perform a reset.
I did this and now the screen just shows the htc logo on white background.
Irish phone - got it august '10. recently upgraded ROM from HTC site to version 3.14.405.2 but not sure now whether I've wrecked it completely.
Was just sick of WinMo and wanted a change - can anyone help please?
ND
boot into bootloader and start again. do you have hspl? right radio?
get into bootloader. flash magldr. then flash nandroid.
you probably need to downgrade the rom to get to hspl 2.08
Thanks - I got the correct HSPL and installed it on the phone, that part was fine. The problem now is that the handset isn't even acknowledging when it's plugged in. And when I connect via USB, the computer isn't registering any connection to it.
I think it's toast! The only thing I can see is a white background with green htc lettering i.e. welcome screen
Thanks for getting back to me, any other ideas?
Will I be able to reload original windows back on by myself?
Try windows 7 XP sucks doing this kind of stuff
Sent from my Nexus One using XDA App
ndonovan said:
...The only thing I can see is a white background with green htc lettering i.e. welcome screen...
Thanks very much for the response. As above, the handset is completely unresponsive - it's not even showing a "charge" when plugged in.
Any help greatly appreciated
Many thanks
Signed,
Cracking up
Click to expand...
Click to collapse
Can you get to bootloader?
(power on while holding vol. down)........
If so, get to bootloader then connect via usb. The word serial at the bottom of the screen should change to USB. This sometimes takes a few minutes (for me anyway)
Once it reads "USB" flash a WM6.5 Rom in the usual way.......
If you cant get to bootloader then theres a good chance you've somehow borked your device......
Thanks everyone and in particular jsmmcabe and conantroutman
I got into bootloader and I'm trying to reinstall the windows os from there.
will let you know how I get on,
thanks again guys - lifesavers
I should have mentioned that flashing a stock 6.5 rom will wipe HSPL.
If you flash a stock rom then you will need to reinstall HSPL before attempting any MAGLDR/NAND shenanigans... (sheNANDigans?? see what I did there )
If you flash a custom ROM from XDA then your HSPL will be ok......
Also should have mentioned the age old "NO .51. radios on a tmous" advice.........
Good luck.......
Well after all of that I went to Pirate Bay, downloaded an Android 2.2 file, copied it onto my SD card and ran it.
Hey presto, I have an Android Phone!
I cannot begin to tell you how much better it is. It's fast, it doesn't freeze, the whole interface is much cleaner and easier to use.
SNAG ITEM:
Tried doing the same with a friends phone and when activating the copied files from the SD card, the thing just hangs and I have to reset the phone.
Any idea why it worked on mine and not his?
Same phone, bought in Ireland, a week apart. Different mobile operator networks though..... I'm Vodafone, he's O2 - weird, no?
ndonovan said:
Well after all of that I went to Pirate Bay, downloaded an Android 2.2 file, copied it onto my SD card and ran it.
Hey presto, I have an Android Phone!
I cannot begin to tell you how much better it is. It's fast, it doesn't freeze, the whole interface is much cleaner and easier to use.
SNAG ITEM:
Tried doing the same with a friends phone and when activating the copied files from the SD card, the thing just hangs and I have to reset the phone.
Any idea why it worked on mine and not his?
Same phone, bought in Ireland, a week apart. Different mobile operator networks though..... I'm Vodafone, he's O2 - weird, no?
Click to expand...
Click to collapse
Could be its not booting because of an incompatible radio....
must be above 2.08.50..... you can find this info in settings about phone...
Also, why download android from the piratebay???
Everything android related you could possibly need is here on XDA.
Personally Id be suspicious of anything from a site like that. Theres no way of knowing whats in that Rom. I would change to a well used and trusted build from XDA if I were you.
Theres no exact science to getting this running on different phones, what works for one may not work for another......
Got the HD2 second hand, came with android, everything fully functional. Flashed back to the future win7 rom (following instructions carefully) and now I've no loudspeaker sound. Can still hear calls through the small normal speaker but nothing when swicthed to speakerphone, playing music or ringtone/message tones.
Could this be a bad radio? I've upgraded to the latest since flashing from android but it hasn't fixed the problem. Hope someone can help, thanks!
have you already tried to flash back to the stock Windows Mobile 6.5 rom from HTC and then flash MAGLDR and WP7 again? This might help. Oh, and never forget to perform a hard reset after WP7 is flashed and fully loaded (settings-->about)
I tried going back to win 6.5 but no sound there. Going to try install everything again from scratch and change my rilphone.dll. Thanks
Do you know rilphone.dll works/installs/ anything? There's no guide on how to use it on xda that I can find. It just says don't install it unless I know what I'm doing... but I can't find a guide to figure out what I'm doing..
yesterday released new update 7.10.8862.144
just information for all :good:
I have custom ROM and update run OK by ZUNE without any change or lock back.
i'm trying to update but i GOT 80180042 error
Currently I am using a rooted custom ROM - will I loose my root when updating via Zune? Or will my phone still be rooted after the regular update via Zune?
jupp99 said:
Currently I am using a rooted custom ROM - will I loose my root when updating via Zune? Or will my phone still be rooted after the regular update via Zune?
Click to expand...
Click to collapse
mine stayed rooted
and new think discovered
B/T start working ( is visible for laptop and can add device to laptop but no another services as push or serial port)
HEUREKA MICROSOFT
Error with updating: 80180048
I got error 80180048 when I try to update. Does anyone know how I can fix this problem. Ican't rollback with Zune . I have Win 8 installed on my computer lately. A hard reset does'nt work neighter.
I have solved the problem by installing another rom : Dynamics. After that there were 2 updates to 8862.142 and than to 8862.144.
Everything oke now!
flippolino said:
I got error 80180048 when I try to update. Does anyone know how I can fix this problem. Ican't rollback with Zune . I have Win 8 installed on my computer lately. A hard reset does'nt work neighter.
I have solved the problem by installing another rom : Dynamics. After that there were 2 updates to 8862.142 and than to 8862.144.
Everything oke now!
Click to expand...
Click to collapse
Interesting, I'm looking for custom ROM 8862.144 for my Omnia7 but I don't understand/find how to get this build.
Do I have to install Dynamics Rom (build number??) and then?
What is the procedure to get 2 updates 862.142 and 8862.144?
I have Win8 x64 on my PC and Zune latest version, but when I installed my old custom ROM Mi7Rom Nokia Ed WP 7.5 I had Windows 7 on my PC.
Thank you very much
Mousexx74 said:
Interesting, I'm looking for custom ROM 8862.144 for my Omnia7 but I don't understand/find how to get this build.
Do I have to install Dynamics Rom (build number??) and then?
What is the procedure to get 2 updates 862.142 and 8862.144?
I have Win8 x64 on my PC and Zune latest version, but when I installed my old custom ROM Mi7Rom Nokia Ed WP 7.5 I had Windows 7 on my PC.
Thank you very much
Click to expand...
Click to collapse
With my Phone :Samsung Omnia 7,I worked this way out : With the rom from Ansar installed on it no way! installation failed. After a hint I found, I installed the Dynamics rom (see elswhere here on the site and how to do) and after that with the latest Zune I could install the 2 updates from Microsoft and the Phone is now really oke with the new Microsoft build.
My Phone was English With the dynamic rom I could choose Dutch and quess, with the update from Microsoft the possibility for Dutch is there now officially. With the dynamic rom on it : open Zune ,look for updates and wait.... and then the first 142 update comes.
I've done the same. I installed the rom Dynamics and Iwas connect the mobile to PC. When starting Zune, found an update, the 8860 and then another: the 8862. Now, I have the latest fw. Good rom, the rom Dynamics!
lomax50 said:
I've done the same. I installed the rom Dynamics and Iwas connect the mobile to PC. When starting Zune, found an update, the 8860 and then another: the 8862. Now, I have the latest fw. Good rom, the rom Dynamics!
Click to expand...
Click to collapse
Wow great news.
I find post about "Dynamics v2.0 - WP7.8 RTM and much more"
I've downloaded txt files under links section where I find ROM download URL.
But I cannot find anything about installation instruction.
On my Omnia 7 I've already installaed Mi7Rom Nokia Ed (WP 7.5)...
Can I use same instructions for Dynamics v2.0?
Thank you
Okay.
Short instr.
1.You have to install the Samsung usbdriver 5.2
2.Set your Omnia Phone in downloadmode : press and hold Camera button, volume + and the power button. ( on your screen you see a yellow triangle)
3. Magdldr_2.00 .Open DFT_MLI_SAM1, select Omnia 7 and Magdldr V200 will be installed.After that put Phone off.
4.Extract the Dynamic rom . You find in the directory DFT_WPI_SAM1.exe.
5Put the Phone in MAGDLDR mode by pressing and hold the camera button, volume - and the power button. You see a little yellow triangle.
6.Push the back button on your Phone connect to the pce and start DFT_WPI_SAM1. exe. The download start.
7. After installing and setting your Phone, connect to your pc, start Zune and look for updates. I found the first directly and the second cam afther that right away!
Succes!
Great... Everything goes right.
Now I have latest version.
But I have another quesion. How can I clear storage afetr flashing Rom?
I remember that I made something after my first 'rom flash' but I don't remember what I made :-S
Is it an important or optional step?
Thank you
Sent from my SAMSUNG using Board Express
Mousexx74 said:
Great... Everything goes right.
Now I have latest version.
But I have another quesion. How can I clear storage afetr flashing Rom?
I remember that I made something after my first 'rom flash' but I don't remember what I made :-S
Is it an important or optional step?
Thank you
Sent from my SAMSUNG using Board Express
Click to expand...
Click to collapse
Boot into format mode (Volume down + camera + power), and press home twice (format)
The best ROM available
flippolino said:
I got error 80180048 when I try to update. Does anyone know how I can fix this problem. Ican't rollback with Zune . I have Win 8 installed on my computer lately. A hard reset does'nt work neighter.
I have solved the problem by installing another rom : Dynamics. After that there were 2 updates to 8862.142 and than to 8862.144.
Everything oke now!
Click to expand...
Click to collapse
Dynamics v2 is the best ROM around for Omnia 7. Simple installation, powerful Apps. The only tip for those how want a smooth flashing, use a Windows 7 x86 machine. I had troubles using Windows 8 x64.
Download MAGLDR: HERE
Download OMNIA 7 ROM: HERE (Download Omnia__8858_Release.rar file)
Regards!