Database Users

HD2 with T-Mobile brandet HELPPP!!!

I am stuck at to power on the device with vol down pressed.
All I got is the tri-color bootloader screen and the "00028002 NOT ALLOW" message and than starts the tri-color no menu to flash if I fry with the load file from device...If I use the .exe file with the new room I get the tri-color than the "00028002 NOT ALLOW" ant the flush starts till 1% and after that.....T-mobile mist is starting again.
Here the link's that I followed:
http://forum.xda-developers.com/showthread.php?t=591314
http://www.handy-faq.de/forum/htc_hd...e_aendern.html
Please help me with your suggestions what can I do or if a HSPL is on the was as for the HD Blackstone.
Still looks that I need your help MASTARS!!!...Thanks mates.

Hi, there is a mistake in the manual. For a hardreset you have to press volup and voldown together and than press the power button.

HD2 T-Mobile brandet
I have follow your suggestions...I get the manufactury restore message and the unit is loading the original T-Mobile image....I am stuck...
Please help

sounds like your trying to flash the device with another ROM, if so do a search for leo gold card this will allow you to flash original htc ROMs only until hard spl is finished.

HD2 T-Mobile brandet
You are right...I have purchased this unit (over 600 Euro) and I needed in English.
I have done the Gold card procedure with two different micro-SD cards and still no success...now I am powerless and really mad...what is the next step???
I hope that this issue can be solved only with your help MASTERS OF HTC Phones

What problem do you have with the micro-sd ? what about formatting the sd-card, have you done it in the quick modus or in the normal mode ? And why did you read a german discription, when you're from canada ?

HD2 T-Mobile brandet
HIPP HIPP HUREYYYYY
Is done.
please follow the usual instruction on this link....plus ...IMPORTANT, pay attention also to this steps listed below
http://forum.xda-developers.com/showthread.php?t=591314
Format SD card from within WinMo
Place LEOIMG.NBH on the SD card
Read CID with QMAT
Request GoldCard.img with CID, I believe I did not change the first 2 numbers
Write the goldcard to the SD, by having ActiveSync active, and "Write Image" in QMAT.
Reboot to boot-loader by Volume down and power button ate the same time
Reconnect your HD2 to your PC start active sync and run the new room extracted locally on your PC (bubble click on "ROMUpdateUtility.exe" and also do not forget that on this package the "LEOIMG.nbh" is also there renamed form original format.
Many thanks to all of you working to solve our dummies problems.
I wish you also success to get the HSPL soon up and running..
Best regards

tomtom140 said:
HIPP HIPP HUREYYYYY
Is done.
please follow the usual instruction on this link....plus ...IMPORTANT, pay attention also to this steps listed below
http://forum.xda-developers.com/showthread.php?t=591314
Format SD card from within WinMo
Place LEOIMG.NBH on the SD card
Read CID with QMAT
Request GoldCard.img with CID, I believe I did not change the first 2 numbers
Write the goldcard to the SD, by having ActiveSync active, and "Write Image" in QMAT.
Reboot to boot-loader by Volume down and power button ate the same time
Reconnect your HD2 to your PC start active sync and run the new room extracted locally on your PC (bubble click on "ROMUpdateUtility.exe" and also do not forget that on this package the "LEOIMG.nbh" is also there renamed form original format.
Many thanks to all of you working to solve our dummies problems.
I wish you also success to get the HSPL soon up and running..
Best regards
Click to expand...
Click to collapse
did you have to rename the signedRUU.NBH to LEOIMG.nbh when flash from PC?

HD2 T-mobile brand
Yes ...I have renamed the signedRUU.NBH to LEOIMG.nbh
Still ..I must say that after testing all day I was not taking the chance to go with the original signedRUU.NBH...so I have renamed the file

u mean ur device starts at the first image?
use gold card?
brick?
have u flash another official rom before?

HD2
I have flush many official rooms on HD blackstone
I have follow all steps in my link ...plus I had to go with the steps posted previous in order to flush my T-Mobile branded unit.
Yes I had to use the gold card as in description plus the registry ending from 2 to 1
bqwd36 said:
u mean ur device starts at the first image?
use gold card?
brick?
have u flash another official rom before?
Click to expand...
Click to collapse

I think i have finally made a brick

I did something really silly 2 days ago.
Playing with the HD, i was looking at the sd card and saw old 1.14 spl as an nbh file, and thought, i think i might go back o scratch and start fresh. So i knew running 1.56 roms, that i would get the green screen and thought, well i know how to fix that, and proceeded to update the spl first--- what a mistake that turned out to be.
Now i hear u say just hook it up to activesync-- well there is my second problem- activesync wont see the phone in any of 3 usb 2.0 ports on my laptop.
Put it into bootloader when hooked up, and i get the tri color screen and it says
Blac120 32M RUUNBH
SPL-1.14.0000
MicroP-Blackstone(LED) V6
Upgrade Rom Code error
Please try again
USB doesnt show at the bottom where it usually says Serial.
When i remove the usb cable, it says serial, and when i plug it back in, it wont disappear.
The phone will not do anything except go into bootloader screen everytime i turn it on.Even just by pressing on button, with sd dard removed. Once on, i have to remove the battery to turn it off.
My only option is if there is a stock rom with signed RUU nbh file that might trick it when i try uploading vioa sd card.
Does anyone have any ideas on how to solve this problem?
Very appreciating Frank in Australia

"My only option is if there is a stock rom with signed RUU nbh file that might trick it when i try uploading vioa sd card."
You answered your own question. If you've got the bootloader, you don't have a brick. Do that, and you should be fine.

Budadank said:
"My only option is if there is a stock rom with signed RUU nbh file that might trick it when i try uploading vioa sd card."
You answered your own question. If you've got the bootloader, you don't have a brick. Do that, and you should be fine.
Click to expand...
Click to collapse
Yeah i understand this,but what i really need to know is the stock rom- is it possible to download it as a Signed Ruu-NBH file so i can upload via sd card?
Thanks for your response
Still looking and trying to find it
Frank

I am not sure but i think you can extract the nbh file from the original htc stock rom.exe file.i do not want to say anything stupid but maybe after that you can update from the card.Someone correct me if i am wrong.
Good luck and keep us posted.

fordmav said:
Yeah i understand this,but what i really need to know is the stock rom- is it possible to download it as a Signed Ruu-NBH file so i can upload via sd card?
Thanks for your response
Still looking and trying to find it
Frank
Click to expand...
Click to collapse
berbecverde said:
I am not sure but i think you can extract the nbh file from the original htc stock rom.exe file.i do not want to say anything stupid but maybe after that you can update from the card.Someone correct me if i am wrong.
Good luck and keep us posted.
Click to expand...
Click to collapse
Yes you can extract the nbh file from the shipped rom. On your pc, right click on the shipped rom.exe and select "Extract Files.....". Then rename the extracted RUU_signed.nbh file to BLACIMG.nbh, copy to your sd card and flash. Good luck.

disable <allow usb connections> in the connection settings of active sync.. this might be the reason..of thd not being detected on usb connection in bootloader mode!
use MTTY .. erases almost everything on ram except bootloader..
or u can flash a stock rom

Thank you everyone for your advice. I have now managed to extract nbh from stock 1.14 rom, wwe as i need, and it goes 1 step further by saying loading, checking and then an error or 020002 appears and says not allow
. So i wonder if this means hspl needs to be re-installed???
Frank

[Q] [28.June.2011][MAG/cLK] NexusHD2-Gingerbread V2.8 [GRJ22/Android2.3.4]

I am trying to install [28.June.2011][MAG/cLK] NexusHD2-Gingerbread V2.8 [GRJ22/Android2.3.4][K: tytung_r10] by tytung.
MAGLDR 1.13 has installed correctly
Downloaded MAGLDR_CWM_Recovery_v3.2.0.0_for_NexusHD2_135M.zip, but when I run DAF.exe file I get the following message:
An error has occurred
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (725)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (304)
My device has on it:
Device: HTC HD2
HSPL: 2.08.HSPL
Radio: Leo_RADIO_2.15.50.14
Bootloader: MAGLDR 1.13
I previously had NexusHD2-Froyo V1.9G NAND 　and it worked fine.
I even reinstalled WM 6.5 and started from scratch, but still had same error as above.
Please Help

You are missing files on the zip file.
Go to this link and download the CMYLXGOs.ClockworkMod.Recovery.Partition.Setup.02.04.2011.RAR
then extract rapitool.exe and enterbootloader.exe to your MAGLDR_CWM_Recovery_v3.2.0.0_for_NexusHD2_135M folder.
Don't worry you are not replacing any files, these are the files that missing from the build.
http://forum.xda-developers.com/showthread.php?t=915159
After you placed this files try to flash it again. Let me know if you have any questions.
Sent from my HTC HD2 using XDA App

shankar10 said:
You are missing files on the zip file.
Go to this link and download the CMYLXGOs.ClockworkMod.Recovery.Partition.Setup.02.04.2011.RAR
then extract rapitool.exe and enterbootloader.exe to your MAGLDR_CWM_Recovery_v3.2.0.0_for_NexusHD2_135M folder.
Hello shankar10,
I have done as you suggested (the files were already there, but I replaced them just incase), still have the same error message.
The only difference in the 2 zip files is the last file:
"recovery_3.2.0.0_leo.img" in the file you suggested and
"recovery-raw.img" in the file I downloaded from tytung.
Your help in this is most appreciated.
Click to expand...
Click to collapse

Davidban64 said:
shankar10 said:
You are missing files on the zip file.
Go to this link and download the CMYLXGOs.ClockworkMod.Recovery.Partition.Setup.02.04.2011.RAR
then extract rapitool.exe and enterbootloader.exe to your MAGLDR_CWM_Recovery_v3.2.0.0_for_NexusHD2_135M folder.
Hello shankar10,
I have done as you suggested (the files were already there, but I replaced them just incase), still have the same error message.
The only difference in the 2 zip files is the last file:
"recovery_3.2.0.0_leo.img" in the file you suggested and
"recovery-raw.img" in the file I downloaded from tytung.
Your help in this is most appreciated.
Click to expand...
Click to collapse
In that case, go to activesync, settings and disable allow usb connection. then right click on the DAF.exe and properties. Make sure the compatibility is not set to like windows xp SP2, in other words make sure to uncheck the compatibility.
Run as administrator, this should work.
just a word of caution, DO NOT REPLACE ANY OTHER FILES other than I specified above. Which are rapitool.exe and enterbootloader.exe
Click to expand...
Click to collapse

u can just use the tool kit and choose 135lb with 5mb cache ...its the same

shankar10 said:
Davidban64 said:
In that case, go to activesync, settings and disable allow usb connection. then right click on the DAF.exe and properties. Make sure the compatibility is not set to like windows xp SP2, in other words make sure to uncheck the compatibility.
Run as administrator, this should work.
just a word of caution, DO NOT REPLACE ANY OTHER FILES other than I specified above. Which are rapitool.exe and enterbootloader.exe
Click to expand...
Click to collapse
Okay, I have followed the above. But I couldn't see on "DAF.exe" when right clicked, 'propertiies' or anything to change 'compatibility'. I use Windows 7 on my pc.
I have retried the whole process, but still the same error message! The phone currently has WM 6.5 on it. Surely, if I follow the instructions on tytung's thread and the files within the zip files are correct, it should work. so what am I doing wrong
Just a thought: I have "CotullaHSPL 0x50" rather than "CotullaHSPL 0x30" on phone, could that be the problem?
All other requirements as per tytung's thread are correct.
Okay: Splash screen after pressing vol dwn during power on =
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x50
Is this correct?
Click to expand...
Click to collapse

Davidban64 said:
I am trying to install [28.June.2011][MAG/cLK] NexusHD2-Gingerbread V2.8 [GRJ22/Android2.3.4][K: tytung_r10] by tytung.
MAGLDR 1.13 has installed correctly
Downloaded MAGLDR_CWM_Recovery_v3.2.0.0_for_NexusHD2_135M.zip, but when I run DAF.exe file I get the following message:
An error has occurred
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (725)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (304)
My device has on it:
Device: HTC HD2
HSPL: 2.08.HSPL
Radio: Leo_RADIO_2.15.50.14
Bootloader: MAGLDR 1.13
I previously had NexusHD2-Froyo V1.9G NAND 　and it worked fine.
I even reinstalled WM 6.5 and started from scratch, but still had same error as above.
Please Help
Click to expand...
Click to collapse
If you are flashing this ROM I think you may have the wrong version. This version is the one to copy on an SD card because it does not say "NAND" in the description.

ketzazu said:
If you are flashing this ROM I think you may have the wrong version. This version is the one to copy on an SD card because it does not say "NAND" in the description.
Click to expand...
Click to collapse
hmmm interesting thought, however looking at the installation guide @ point 3
Flash Android ROM
Enter ClockworkMod Recovery when you're on MAGLDR 1.13 (hold "Power" button during boot) and select "AD Recovery" or "Boot AD SD" (if ever copied CWM's initrd.gz and zImage to SD).
Flash NexusHD2-Gingerbread_V2.8_NAND_(Android-2.3.4)_update.zip (85.27 MB)
the file name to download has "nand" in it!
If any of you can message tytung for me to confirm if it's nand or not, would be appreciated. System won't let me send a direct message as I don't qualify for that at this time
Or get tytung to email me directly at [email protected]

here is the document contains how to do clean installation. this might help.
Just want to make sure you have the international version right? not the T-mobile one?
let me know how did go.

shankar10 said:
here is the document contains how to do clean installation. this might help.
Just want to make sure you have the international version right? not the T-mobile one?
let me know how did go.
Click to expand...
Click to collapse
Thanks Shanka10,
unfortunatly, after following the guide you provided, and flashing the ClockworkMod Recovery version posted in OP of TyphooN thread (run DAF.exe)
I still got the following error message:
An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (736)
Error Description: EnterBootloader missing
Info: .\RSPL\BootLoader.cpp (176)
I did follow all steps correctly, even using all the files linked in the guide
My Htc HD2 is the international version.
I'm stumped for ideas, after following the guide to the letter, I still fail. I hope you can provide a solution.........

Davidban64 said:
Thanks Shanka10,
unfortunatly, after following the guide you provided, and flashing the ClockworkMod Recovery version posted in OP of TyphooN thread (run DAF.exe)
I still got the following error message:
An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (736)
Error Description: EnterBootloader missing
Info: .\RSPL\BootLoader.cpp (176)
I did follow all steps correctly, even using all the files linked in the guide
My Htc HD2 is the international version.
I'm stumped for ideas, after following the guide to the letter, I still fail. I hope you can provide a solution.........
Click to expand...
Click to collapse
if u can run task 29 and install magldr and stuck only on recovery this mean something is wrong in ur computer ...try the toolkit and even if u have the problem try again and again ( it happend to me once and i just kept trying and trying and i did it) or change the computer iy might help

mootmetal said:
if u can run task 29 and install magldr and stuck only on recovery this mean something is wrong in ur computer ...try the toolkit and even if u have the problem try again and again ( it happend to me once and i just kept trying and trying and i did it) or change the computer iy might help
Click to expand...
Click to collapse
Okay, I've just tried it all again, even several times aon an windows xp pc, still no luck

Davidban64 said:
Okay, I've just tried it all again, even several times aon an windows xp pc, still no luck
Click to expand...
Click to collapse
That's bad dude!
I don't know what else I can do. Do you mind doing a video of what you doing and upload it here. That might help us to see what's going on.
You really need to do some extensive search online, see if others had a same problem and how they resolved it.

shankar10 said:
That's bad dude!
I don't know what else I can do. Do you mind doing a video of what you doing and upload it here. That might help us to see what's going on.
You really need to do some extensive search online, see if others had a same problem and how they resolved it.
Click to expand...
Click to collapse
I did manage to find another thread with similar problems and followed some of there actions, to no avail.
Its just really strange. I had Tytung's [26.JAN][DFT/CWM] NexusHD2-Froyo V1.9G [Android2.2.2][Kernel: tytung_r2_oldcam] installed on this phone previously and all worked well. Worst thing is, that I put WM 6.5 last night thinking that if I start from scratch and realy watch what I am doing then I might get it right, but now I can't even get MAGLDR 1.13 to go on it.
Sorry, but I don't have a vid cam to record & upload.
More searching I will do, but I am just not sure where I'm going wrong (and it's not that hard really and that's sooo frustrating)
Thanks shankar10 for your hepl though and others

Davidban64 said:
I did manage to find another thread with similar problems and followed some of there actions, to no avail.
Its just really strange. I had Tytung's [26.JAN][DFT/CWM] NexusHD2-Froyo V1.9G [Android2.2.2][Kernel: tytung_r2_oldcam] installed on this phone previously and all worked well. Worst thing is, that I put WM 6.5 last night thinking that if I start from scratch and realy watch what I am doing then I might get it right, but now I can't even get MAGLDR 1.13 to go on it.
Sorry, but I don't have a vid cam to record & upload.
More searching I will do, but I am just not sure where I'm going wrong (and it's not that hard really and that's sooo frustrating)
Thanks shankar10 for your hepl though and others
Click to expand...
Click to collapse
No problem, glad to help.
One more thing, why don't you do a task29 and this will allow you to clear any partition and other junk.
then install the wm6 then do the Android. Currently I have the following ROM on my phone
http://forum.xda-developers.com/showthread.php?t=915159
Try to install this and see if this works. Make sure you get the second one which is the international version.
Also, here is a video for you, this might help you a lot.
http://www.jayceooi.com/2011/01/07/...-on-htc-hd2-with-clockworkmod-recovery-video/
I'm not trying to question your intelligence but sometime we might forget to do a tiny step, which leads to big problem, so following this video will help you a lot to avoid those circumstances.
good luck

...and the continuing saga
Okay, I have reflashed an original HTC HD2 WWE 3.14 Rom.
Then:
Clean Install MAGLDR:
1. Task 29
2. Flash Radio(2.15 Recommended)
3. MAGLDR 1.13
..... (why me?) after lashing MAGLDER 1.13, reboot holding down power button, all I get is white screen with HTC on it.
So what would I have done wrong?
Radio is Leo 2.15.50.14

shankar10 said:
I'm not trying to question your intelligence but sometime we might forget to do a tiny step, which leads to big problem, so following this video will help you a lot to avoid those circumstances.
good luck
Click to expand...
Click to collapse
Shankar10, A BIG THANKYOU FOR YOUR HELP
I HAVE FOUND THE PROBLEM. IT WAS VERY SIMPLE:
TURN OFF ANTIVIRUS
And a big thanks to every one else for advice given

David
Glad you figure it out. It's a good learning curve for everyone. Next time we can suggest others to do the same if they having the same problem.
Sent from my HTC HD2 using XDA App

[Q] how can I get Windows 7 ???

hy guys,
I am a noobie in instaling W7 on hd2
How stable is the W7 ROM now and how easy is to install it?
some links will be perfect
I saw there are 2 difrent ways to install w7. wich one is the best?
i am reading xda forum for the last 5 hours and i cant find a start point.
Please help!
Sorry if this post is in the worng section!!!!!!!!!
my hd2 detailes are:
- radio version 2.15.50.14
- manila version: 2.5.20181527.0
- G 15.42.50.11U
- D 3.14.04666
on the collored screen: PB81100 HX-BC
SPL- 2.08.HSPL 8G XE
0x05
CotullaHSPL 0x30
It was installed a w7.5 on my hd2, so I know that it works and it works perfect!
Much apreciate your help!
Thank you!

Rom here
http://forum.xda-developers.com/showthread.php?t=1356833
Other rom here
http://forum.xda-developers.com/showthread.php?t=953078
Guide here
http://forum.xda-developers.com/showpost.php?p=21010262&postcount=1217
That's the easiest way. Remember that you'll louse EVERYTHING personal on your phone...
Also, there is a third rom ATM, but it requires more work to get to the latest version. Although it allows for more flexible features and updating..
Couldn't be more clear I guess

kid1988 said:
Rom here
http://forum.xda-developers.com/showthread.php?t=1356833
Other rom here
http://forum.xda-developers.com/showthread.php?t=953078
Guide here
http://forum.xda-developers.com/showpost.php?p=21010262&postcount=1217
That's the easiest way. Remember that you'll louse EVERYTHING personal on your phone...
Also, there is a third rom ATM, but it requires more work to get to the latest version. Although it allows for more flexible features and updating..
Couldn't be more clear I guess
Click to expand...
Click to collapse
FANTASTIC!!!
Thank you!!!!!!!
I will start flashing right now!

not workink!
manneged to install leo70, os version 7.0.7004.0 and I think is not a very good ROM.
it works without a sdcard. why?
i did a hardspl. whats the next step?
how can I go back to windows6.5 original?
anny ideeas?
thanks

cosmin_f said:
manneged to install leo70, os version 7.0.7004.0 and I think is not a very good ROM.
it works without a sdcard. why?
i did a hardspl. whats the next step?
how can I go back to windows6.5 original?
anny ideeas?
thanks
Click to expand...
Click to collapse
Try installing a better rom such as YukiXBMod, PDA's, or HD2O at 8107. I've been using WP7 and it has been by far the best OS I've ever used.
The speed of the phone also depends on your SD card. If it's sluggish, more than likely, your card isn't compatible.

ayopancheezy said:
Try installing a better rom such as YukiXBMod, PDA's, or HD2O at 8107. I've been using WP7 and it has been by far the best OS I've ever used.
The speed of the phone also depends on your SD card. If it's sluggish, more than likely, your card isn't compatible.
Click to expand...
Click to collapse
can I have the exact links? please
do I need to uninstall this w7 that is running now? how?
I tried from htc's website this ROM Update for HTC HD2 (3.14.405.2), but I get the 260 error.
I tried to go with 23.Langs+HD2+Pdaimatejam+Rom+Wp7.5+mango+7.10.8107.79+v6.5 but I cant extract the files. I get an error.
please help!
thank you

cosmin_f said:
can I have the exact links? please
do I need to uninstall this w7 that is running now? how?
I tried from htc's website this ROM Update for HTC HD2 (3.14.405.2), but I get the 260 error.
I tried to go with 23.Langs+HD2+Pdaimatejam+Rom+Wp7.5+mango+7.10.8107.79+v6.5 but I cant extract the files. I get an error.
please help!
thank you
Click to expand...
Click to collapse
manneged to go back to windows 6.5 BUT I do have a very big problem:
MY SDCARD SHOWS ONLY 200MB! IT IS A 4GB ONE AND A BRAND NEW ONE!
why?

cosmin_f said:
manneged to go back to windows 6.5 BUT I do have a very big problem:
MY SDCARD SHOWS ONLY 200MB! IT IS A 4GB ONE AND A BRAND NEW ONE!
why?
Click to expand...
Click to collapse
http://forum.xda-developers.com/forumdisplay.php?f=977
all the roms available are in that thread. i'm using HD2O and it's fantastic. I'm not going back to Android. everything runs much smoother and i use my phone more rather trying to customize it like on the android.
and your SD card says only 200mb available because when you flashed WP7, it locked your SD card. there are only a few ways to unlock it.
i suggest you reflash WP7 again. It's a great OS.

ayopancheezy said:
http://forum.xda-developers.com/forumdisplay.php?f=977
all the roms available are in that thread. i'm using HD2O and it's fantastic. I'm not going back to Android. everything runs much smoother and i use my phone more rather trying to customize it like on the android.
and your SD card says only 200mb available because when you flashed WP7, it locked your SD card. there are only a few ways to unlock it.
i suggest you reflash WP7 again. It's a great OS.
Click to expand...
Click to collapse
Tried
23.Langs+HD2+Pdaimatejam+Rom+Wp7.5+mango+7.10.8107.79+v6.5
and
HD2 Pdaimatejam Rom Wp7.5 mango 7740 v1
but i got this errors
WTF its going on?????????
I will leave this hd2 to rust and I will stick wiyh my desire hd!

cosmin_f said:
Tried
23.Langs+HD2+Pdaimatejam+Rom+Wp7.5+mango+7.10.8107.79+v6.5
and
HD2 Pdaimatejam Rom Wp7.5 mango 7740 v1
but i got this errors
WTF its going on?????????
I will leave this hd2 to rust and I will stick wiyh my desire hd!
Click to expand...
Click to collapse
you simply not read instructions (tutorial) how to install this ROM.... you already ask this question under ROM topic....

You are flashing the rom incorrectly.
Under the rom thread you wish to flash, please read the instructions first. All the Rom creators usually edit their thread to make sure the instructions are included. The instructions are also included in the DWI.exe file. You are just not reading it.
1. Turn off the phone completely.
2. Turn it back on and hold the shut down button until you reach the MAGLDR screen.
3. Press the green button on "USB Flash"
4. On your screen, it will load and say USB Flash ready!
5. Unrar the files and place them somewhere like your desktop.
6. Open "DWI.exe" and make sure you Ran it as ADMINISTRATOR.
7. Read everything or simply skim through it.
8. Keep clicking Next and watch everything finish on both your computer and phone screen.
9. Wait for it to boot up. It usually takes around 5-10 minutes.

kid1988 said:
Rom
Guide here
http://forum.xda-developers.com/showpost.php?p=21010262&postcount=1217
Couldn't be more clear I guess
Click to expand...
Click to collapse
Excellent and thanks very much. Too much head spinning information on sticky and almost gave up. Following linked guide took me less than 1hr and that including some partition errors + sd card not recognised msg on first try. Missed the part :
2.GO to services and activate the last 24mb of RAM
3.Also in services do format MBR
Now need activation. Just a quick one: can I change the sim(number) after received the code? Or the code is only valid for given phone number to MS chat agent?
cheers.

dont worry give your original number...code is valid only for the live account...

Actually, Activation works
Tried on different phones, different rom, different SN (all HD2 though) different sims (also no sim) and different live account. Activation just always works.

Code is for a live account.. But you can use it on another account after 30days if the earlier account stays unused / withdrawn.... So you can use it on different phones, and and yes on different accounts too.. The problem comes when you want to install the same app you have on one phone-live account from marketplace...again on another phone with same account.... It says already installed
Sent from my HTC HD2 with WP7.5/android miui using tapatalk

Google or bing for it =)

Installing HSPL via SD card? Is there a way?

I have a HD2 with defective USB port – phone still able to charge but nothing going on if plug to my laptop. I have Windows on it and was able to install Android SD ROM on it – so no issue with SD ROM via Haret booting.
I want to install NAND ROM on it via MAGLDR or CLK but need to install HSPL first. Since I have defective port, I won’t be able to install HSPL 2.08 via USB.
So question to the group – Is there a way to install HSPL 2.08 via SD card?

No ........

bricked hd2
gasanpride said:
I have a HD2 with defective USB port – phone still able to charge but nothing going on if plug to my laptop. I have Windows on it and was able to install Android SD ROM on it – so no issue with SD ROM via Haret booting.
I want to install NAND ROM on it via MAGLDR or CLK but need to install HSPL first. Since I have defective port, I won’t be able to install HSPL 2.08 via USB.
So question to the group – Is there a way to install HSPL 2.08 via SD card?
Click to expand...
Click to collapse
same problem with me bricked usb port i update my hd2 to stock rom then update error for a while how to fix this please help
SS-B3
SPL-2.10.0000 8G XE
MicroP(LED)
MicroP(TOUCH) 0x50
that was appeared on bootloader any idea fpr help thanks in advance

The answer is already there.
No USB = No HSPL.

Why don't you fix the usb port and make your life easier? Is it because you can't find spare parts or something else?
Anyways, regarding the main question I often wondered if flashing HSPL via SD card was possible... and the only way I would think of was GoldCard method.
Use a low capacity sd card to write the GoldCard.img to, place the HSPL (LEOIMG.nbh) on the root and flash it through tricolor screen..
To me, it sounds more or less right in theory, but never tried it.
Regards!

kokotas said:
Use a low capacity sd card to write the GoldCard.img to, place the HSPL (LEOIMG.nbh) on the root
Click to expand...
Click to collapse
where would you find a leoimg.nbh of hspl?

samsamuel said:
where would you find a leoimg.nbh of hspl?
Click to expand...
Click to collapse
I have it if needed, but generally a user that already has HSPL installed and runs Windows Mobile can dump it using itsutilsbin
Code:
pmemdump 0x8ff00000 0x80000 hspl.nb
and then use NBHImageTool to create the LEOIMG.nbh.
Regards!

Im really amazed that if its so easily done, how come it hasn't been done a long time ago, , tons of people have been begging for an sd flashable hspl since 2010.

samsamuel said:
Im really amazed that if its so easily done, how come it hasn't been done a long time ago, , tons of people have been begging for an sd flashable hspl since 2010.
Click to expand...
Click to collapse
Just what I was thinking

samsamuel said:
Im really amazed that if its so easily done, how come it hasn't been done a long time ago, , tons of people have been begging for an sd flashable hspl since 2010.
Click to expand...
Click to collapse
Probably because nobody ever asked Kokotas or one of the other half a dozen or so people who would have known this answer. And, just to clarify, I had no clue either.
---
Appreciation is a wonderful thing. It makes what is excellent in others belong to us as well.

NYLimited said:
samsamuel said:
Im really amazed that if its so easily done, how come it hasn't been done a long time ago, , tons of people have been begging for an sd flashable hspl since 2010.
Click to expand...
Click to collapse
Probably because nobody ever asked Kokotas or one of the other half a dozen or so people who would have known this answer. And, just to clarify, I had no clue either.
Click to expand...
Click to collapse
Hi guys,
I really don't know if it would work... I only shared my thoughts. And before that, I suggested the most logical thing: fix the usb port
Just because I described it in a sentence it doesn't mean that it's something easy. At least I didn't say it in such a way.
If something is easy, that is probably the part of getting the HSPL in nbh format. I could even attach it here (but because I have not tested it and people tend to mess things up first and ask questions later, I'd better not).
Code:
[EDIT1]
Ok, here is [URL="https://copy.com/yVKIi47MKUpm"]hspl.rar[/URL]. It contains the [B][U]dump[/U][/B] of hspl 2.08 and 3.03.
[U]It is not flashable![/U] Needs to be [I]converted[/I] to nbh format before any flashing happens.
[/EDIT1]
The not so easy part is to buy_revskills_psas, create_the_Goldcard & flash_HSPL_via_SDCard based ONLY on some stranger's (me) theory...
Code:
[EDIT2]
Ok, if you check samsamuel's next post, it seems that getting the goldcard.img is easy(&free) if you know the card's CID.
Writing that img to your card could probably be done by following [URL="http://forum.xda-developers.com/showpost.php?p=17247902&postcount=2"]certain steps[/URL].
I can't stress enough that the hspl files and/or this theory are not tested!
So don't do anything that you will regret!
[/EDIT2]
Regards!

kokotas said:
The not so easy part is to buy_revskills_psas, create_the_Goldcard & flash_HSPL_via_SDCard based ONLY on some stranger's (me) theory...
Regards!
Click to expand...
Click to collapse
psssst http://samsamuel.co.uk/hosted/leogoldcard.php

That would be great. But I am already unbranded! Would it still work?
It would be nice to be able to repartition with magldr tho'.. .
Then all would be possible without a PC, nearly.
Sent from my NexusHD2 using xda premium

Hello kokotas,
I have one of those HD2s with a damaged usb port with stock 3.14 wp6.5 loaded so wanted to try get hspl3.03 with clk 1.5 on it.
Could you please post the hspl3.nbh file so to create goldcard.
Thanks
Pavlos

can somebody post already done hspl2.08.nbh file? I made goldcard, but I cant do this :crying:

jetDare said:
can somebody post already done hspl2.08.nbh file? I made goldcard, but I cant do this :crying:
Click to expand...
Click to collapse
I dont think that is possable

jetDare said:
can somebody post already done hspl2.08.nbh file? I made goldcard, but I cant do this :crying:
Click to expand...
Click to collapse
i know its a bit late but i have found a hspl.nbh file as im interested in this as well
Code:
HSPL:
http://androidforum.tytung.com/download/file.php?id=41
but i think the bigest problem will be the RADIO because i dont think there is a way of flashing it without usb