Hello guys, is there somebody have HSPL4, it's impossible to dowload it anywhere. Same message all time "read error on server". Sorry for basic language, i'm french.
here ya go
Download problem HPSL4
Kameirus said:
here ya go
Click to expand...
Click to collapse
Thanks but I have the same problem : Message = D:\Downloads\HSPL4.zip.part can not be saved because the source file could not be read. Try later or contact server admin.
try this one
http://d-h.st/OL8
HSPL4
it did the same thing, I'll try on another computer
or if you have the file, can you send it as an attachment on [email protected]
Grabuje said:
it did the same thing, I'll try on another computer
or if you have the file, can you send it as an attachment on [email protected]
Click to expand...
Click to collapse
It's not the file, it's your computer. I downloaded the one attached and it ran flawlessly.
Marvlesz said:
It's not the file, it's your computer. I downloaded the one attached and it ran flawlessly.
Click to expand...
Click to collapse
it's ok, I found what was wrong, it's because the antivirus, avast, which postponed a false alarm. Thank you, have a good day.
Marvlesz said:
It's not the file, it's your computer. I downloaded the one attached and it ran flawlessly.
Click to expand...
Click to collapse
Thank you, I found was wrong. It's Avast AV which blocked the file. Have a nice day.
Related
Hi all !
Tried to install the software and have this error message.
Is it possible to overcome this ?
Registry hack does not work.
Allow the unsigned app from installing for everything.
HKEY_LOCAL_MACHINE\Secutiry\Policies\Policies]
Change value 0000101a from 0 to 1 Do a soft reset.
baudy.
try this file
it will then disable the 'signed' part of the installation and should therefore not give you any errors.
http://www.beyondthetech.com/downloads/phone/Cert_SPCS.CAB
l6cum said:
try this file
it will then disable the 'signed' part of the installation and should therefore not give you any errors.
http://www.beyondthetech.com/downloads/phone/Cert_SPCS.CAB
Click to expand...
Click to collapse
How to use it ? Run it once and then the cab which has problems ? Still the same result.
baudy2 said:
l6cum said:
try this file
it will then disable the 'signed' part of the installation and should therefore not give you any errors.
http://www.beyondthetech.com/downloads/phone/Cert_SPCS.CAB
Click to expand...
Click to collapse
How to use it ? Run it once and then the cab which has problems ? Still the same result.
Click to expand...
Click to collapse
ok try this one then, again transfer to phone and run it. then try the unsigned files.
l6cum said:
ok try this one then, again transfer to phone and run it. then try the unsigned files.
Click to expand...
Click to collapse
Did not help either. Still the same message....
sorry, i havent come accross anything else at the moment. if i do i will post.
l6cum said:
sorry, i havent come accross anything else at the moment. if i do i will post.
Click to expand...
Click to collapse
Thanx anyway !
If you tried the Disable Security CAB file and you're still getting that message, it's a possibility that the file was actually modified. In that particular case, you have to have the device re-signed... search for signcode here...
Disable Security CAB file unavailable
Hi, it would seem that beyondthetech has made an arrangement with his hosting company that prevents him from hosting cab files to reduce his traffic burden. Does any one have a copy of the disable security cab file as all links point to beyondthetech and no files are available from there currently
Thanks in advance
the file is on my post above and still downloads without any problems!
do you have something like this for the s620?
l6cum said:
ok try this one then, again transfer to phone and run it. then try the unsigned files.
Click to expand...
Click to collapse
Im trying to use old dictionary (16 bit American Heritage) but says access denied not digitally signed.
Sorry I found this thread with search
l6cum said:
try this file
it will then disable the 'signed' part of the installation and should therefore not give you any errors.
http://www.beyondthetech.com/downloads/phone/Cert_SPCS.CAB
Click to expand...
Click to collapse
Mate, can't download the file
How do you run this file?
Sorry
I am new with treo 750 and does not know how to run it. I have tried other programs and they have all failed to install.
Please help
Thanks
l6cum said:
ok try this one then, again transfer to phone and run it. then try the unsigned files.
Click to expand...
Click to collapse
This works on my Orange Branded HTC Touch
Not digitally signed wuth trusted certificate
thnx 4 the cab. I got same prob few days back. I just adjust the properties for cab file on my PC, clear 'unblock', transfer file again to my pda n things work. but i'm not sure of thats..maybe this cab can make work more easy n i'll try soon.
thnx bro.
l6cum said:
ok try this one then, again transfer to phone and run it. then try the unsigned files.
Click to expand...
Click to collapse
I Can't download the file. Can someone please help me?
Please follow this link:
The problem is 100% solved with Security Configuration Manager
http://forum.xda-developers.com/showthread.php?t=404170
baudy2 said:
Hi all !
Tried to install the software and have this error message.
Is it possible to overcome this ?
Registry hack does not work.
Allow the unsigned app from installing for everything.
HKEY_LOCAL_MACHINE\Secutiry\Policies\Policies]
Change value 0000101a from 0 to 1 Do a soft reset.
baudy.
Click to expand...
Click to collapse
I can't help you with your particular enquiry, but I have exactly the same device history as per your signature - give or take a couple of Symbian devices along the way. I am on the HD2 at the moment. Still love the jasjar though - terrified of the day when the battery dies on me.
rjstep3
fix!!!!!!
ok go to settings (back all your stuff up) security and factory reset ok then install the disable security signed thing and your done
SlavKor said:
Please follow this link:
The problem is 100% solved with Security Configuration Manager
http://forum.xda-developers.com/showthread.php?t=404170
Click to expand...
Click to collapse
Unfortunately it did not solve the problem: Security Configuration Manager tries to install Tool.cab on my HD2, but without any success, "Not signed application, instalation was unsuccessful"
Does anybody have solytion, how can I manually edit the registry???
"mobile registry editor" when I try to change registry key returns with error "Not Allowed"
Please e-mail: MOD EDIT: REMOVED EMAIL
Is there anyway to change the indialer backgrounds on the wing? I can find some dialer screens, but all I want to do is change the background not the buttons. Also when someone calls I would like to be able to change that background as well. I have searched all over this site and the net and can find nothing. Any help would be greatly appreciated. Thanks again.
after 3 days on here you think i would have a response. oh well guess it can't be done
beergenius said:
after 3 days on here you think i would have a response. oh well guess it can't be done
Click to expand...
Click to collapse
No it can be done. I remember reading about it a WHILE ago...but I did a little searching and this is what I came up with. Its called tdial design.
http://forum.ppcgeeks.com/showthread.php?t=7819
Thanks for the reply, but I tried that and it has an error in the file after i unzip and try to use it. May be I'm doing something wrong. Will try again.
beergenius said:
Thanks for the reply, but I tried that and it has an error in the file after i unzip and try to use it. May be I'm doing something wrong. Will try again.
Click to expand...
Click to collapse
Thats odd, i downloaded it, and messed with it, and it worked fine for me. i think there are a couple of links on the page. try a different one, or i can post the one i dloaded at work tom.
that would be awsome. thanks!
beergenius said:
Thanks for the reply, but I tried that and it has an error in the file after i unzip and try to use it. May be I'm doing something wrong. Will try again.
Click to expand...
Click to collapse
This is the file I used....it worked fine.
I guess my computer does not recognize this app. Every time I try to open it I get "the application failed to initialize properly (0xc0000135)." what the Hell does that mean?
beergenius said:
I guess my computer does not recognize this app. Every time I try to open it I get "the application failed to initialize properly (0xc0000135)." what the Hell does that mean?
Click to expand...
Click to collapse
Hmmm, odd. I even redownloaded the app that I posted, unzipped it, and reinstalled it and it worked fine. You are unzipping the file first, and then trying to run the application right? Maybe whatever you are using to unzip could be corrupt. Try winrar or winzip to unzip it.
Oh, you aren't trying to install this on your phone are you? You install this on your computer and run it there, not your phone.
tdial only works if your dialer is the HTC touch dialer that comes with some roms. The default TMo rom doesn't have it. If you want to customize it with tdial, you need to first have HTC touch dialer installed.
Hallo,
I'm tatanni an italian student, I have htc shift, but I have a great problem to liberate snap vue.
I tried to share the file to liberate my htc shift, but when I open the unblock zip file by winrar, there is showed a file:000CAb164.001 - 000Cab165.001- file setup and file liberate000 that I can't read.
Thanks
The file it's not supposed to open. Follow modaco's procedure in this link
http://www.modaco.com/content/forum/266537/View-Topic/
it has a video for you to see if you can't understand the procedure.
motowiz said:
The file it's not supposed to open. Follow modaco's procedure in this link
http://www.modaco.com/content/forum/266537/View-Topic/
it has a video for you to see if you can't understand the procedure.
Click to expand...
Click to collapse
Thank you motowiz,
now I'm another problem, when I open the file cab and ink by my mail, it appear the folowing message"Impossible to open this allegate in Messags. It could be not safe".
How I can do?
Which is the problem?
Thanks
tatanni said:
Thank you motowiz,
now I'm another problem, when I open the file cab and ink by my mail, it appear the folowing message"Impossible to open this allegate in Messags. It could be not safe".
How I can do?
Which is the problem?
Thanks
Click to expand...
Click to collapse
You have to configure the e-mail in SnapVue side, it only works there. Did you follow the movie steps, all of them???
If yes, you are not told to open any files, only to save them...
Please watch the film very carfully and follow each step, if you need pause the film between procedures. It helps if you follow the film in a diffrent computer.
motowiz said:
You have to configure the e-mail in SnapVue side, it only works there. Did you follow the movie steps, all of them???
If yes, you are not told to open any files, only to save them...
Please watch the film very carfully and follow each step, if you need pause the film between procedures. It helps if you follow the film in a diffrent computer.
Click to expand...
Click to collapse
The email is configured, and I follow the movie steps by another pc, but I can't click on the file ink and cab to save them, because it show "impossible to open this allegate in messags, it could be not safe".
Ciao e Thanks
tatanni said:
The email is configured, and I follow the movie steps by another pc, but I can't click on the file ink and cab to save them, because it show "impossible to open this allegate in messags, it could be not safe".
Ciao e Thanks
Click to expand...
Click to collapse
show us a photo of the shift at this step.
cmonex said:
show us a photo of the shift at this step.
Click to expand...
Click to collapse
These are the photos.
Thanks
tatanni said:
These are the photos.
Thanks
Click to expand...
Click to collapse
Hi tatanni
You need to hold your stylus on that attachment for a while, it opens a dialog box to save it. If you click on it, WinMo will try to open it. Good Luck.
Thanks
Ram
saiweb said:
Hi tatanni
You need to hold your stylus on that attachment for a while, it opens a dialog box to save it. If you click on it, WinMo will try to open it. Good Luck.
Thanks
Ram
Click to expand...
Click to collapse
Thanks a lot Saiweb,
now I have a wm6 free,
without you and cmonex I think that it should been impossible to liberate my htc shift.
Thank you.
Ciao from Italy
files where are they
Well I know I am well behind the times with this, but a friend gave me his HTC Shift a while ago. I would like to liberate it however the site suggested here no longer hosts the files for me to do this. does anyone know where i can download these files so I can email them to the shift?
thanks in advance
Scot....
found them
All, found the files i need to email to my device in another thread. Should have done more digging before I posted.... oh well
Where did YOU find the LIBERATE FILES ?? I could not find them either, only the other files which are not working
can anyone post mirror links to the liberate files. It has been 2 days searching the Internet without any success. the email form and links on the official site are not working please if anyone has the files share a link or email them to me at either mshauny at gmail dot com or Shauny at cutdeV dot Co dot cc. Thanks In advance
Try to copy and paste this link in your browser. - http://www.pocketpc.ch/attachments/...ws-mobile-freischalten-shiftpackliberatefiles
(add .zip at the very end of the link).
*Right click the link, copy it. Then paste it in your browser and add .zip*
liberate files
saiweb said:
Hi tatanni
You need to hold your stylus on that attachment for a while, it opens a dialog box to save it. If you click on it, WinMo will try to open it. Good Luck.
Thanks
Ram
Click to expand...
Click to collapse
hey bro im from trinidad , i just bought a htc shift x9500 . i wanted to liberate my shift, the links are dead on the sites by chance u have a copy to spare, thanks in advance my email is
[email protected]
RAYBIC101 said:
hey bro im from trinidad , i just bought a htc shift x9500 . i wanted to liberate my shift, the links are dead on the sites by chance u have a copy to spare, thanks in advance my email is
[email protected]
Click to expand...
Click to collapse
to Liberate your HTC Shift, look at http://www.modaco.com/topic/266537-liberate-your-htc-shift/page__st__180
Hakim Rahman said:
to Liberate your HTC Shift, look at http://www.modaco.com/topic/266537-liberate-your-htc-shift/page__st__180
Click to expand...
Click to collapse
Got another problem:
if i send the files as attachment via aol,
only the .link one is shown in SnapVue.
If i take a look at the same mail in vista,
Liberate is also there.
Why this?
late edit: took another provider (web.de) and both files appeared...
Hey u guys/girls,hope u have a good day so far
k so i downloaded like 1 or 2 HD2 Games and when i open it to play, it says tht i need a newer version of the Microsoft® .NET Compact Framework...so.. can anyone help me with this?
Thxs in advance
Have you tried Google yet?
Hockey_Rulez11 said:
Hey u guys/girls,hope u have a good day so far
k so i downloaded like 1 or 2 HD2 Games and when i open it to play, it says tht i need a newer version of the Microsoft® .NET Compact Framework...so.. can anyone help me with this?
Thxs in advance
Click to expand...
Click to collapse
Download it from here:
Code:
http://microsoft-net-compact-framework.en.softonic.com/pocketpc
Or get the .cab from MoDaCo, for a 2MB download, instead of a 33MB download.
http://www.modaco.com/index.php?act=attach&type=post&id=23810
(Does require registration)
nljuggler ; oooh yea, how could i forgotten tht? ofc i tried google.(not tryin to b mean) **ur 2nd comment** - naw no thxs
fitnessvip ; yea i tried this but i wasn't SURE how to activate it on the HD2. How i did it was save the file onto the destop then connect the HD2 to the computer then open up the Phone memory (NOT THE "STORAGE CARD") then just copy and paste the Framework into tht place.so then i thought i was done so then i disconnect it then press the start button and going to "File Explorer" and activate it from there but it doesn't work
Hockey_Rulez11 said:
nljuggler ; oooh yea, how could i forgotten tht? ofc i tried google.(not tryin to b mean) **ur 2nd comment** - naw no thxs
Click to expand...
Click to collapse
Well that's how I found the result in my second post. If you should decide to download it anyway. Copy the .cab file anywhere on your phone (or storage card). Find it with the File Explorer on your phone and click it.
It will start the installation. I'm not even sure it's going to ask you where you wish to install it, but do select 'Device' if appropriate.
nljuggler said:
Well that's how I found the result in my second post. If you should decide to download it anyway. Copy the .cab file anywhere on your phone (or storage card). Find it with the File Explorer on your phone and click it.
It will start the installation. I'm not even sure it's going to ask you where you wish to install it, but do select 'Device' if appropriate.
Click to expand...
Click to collapse
k thxs man
nljuggler said:
Well that's how I found the result in my second post. If you should decide to download it anyway. Copy the .cab file anywhere on your phone (or storage card). Find it with the File Explorer on your phone and click it.
It will start the installation. I'm not even sure it's going to ask you where you wish to install it, but do select 'Device' if appropriate.
Click to expand...
Click to collapse
OH YEA i forgot after downloading it,can i delete the .cab file? or do i have to keep it there?
well after downloading the .cab file and installing it,i opened up the download HD2 game and it was an Error...
Yes, you can delete .cab files after installing them. Too bad the game gave you an error. What was the exact error?
nljuggler said:
Yes, you can delete .cab files after installing them. Too bad the game gave you an error. What was the exact error?
Click to expand...
Click to collapse
I got this error after installing:
MissingMethodException
Cant find PInvoke-DLLen HTCAPI
i Sensors.HTCNavsensor..ctor (form form=
Hey, a new actor enters the scene. Welcome [email protected]@!
A quick search on Google shows that your not the only one with this problem. Haven't found out what caused it yet.
But when do you get this error, as it would be very coincidental if you are referring to the same game as Hockey_Rulez11. Because he never mentioned the nam of the game.
nljuggler said:
Hey, a new actor enters the scene. Welcome [email protected]@!
A quick search on Google shows that your not the only one with this problem. Haven't found out what caused it yet.
But when do you get this error, as it would be very coincidental if you are referring to the same game as Hockey_Rulez11. Because he never mentioned the nam of the game.
Click to expand...
Click to collapse
I got the error after installing diamonCubes and Lightsaber.
I have also innstalled netcfv35, but have not done anything with this file after installing it.
In remove programs the program name is: Microsoft .net CF 3.5 so I think everything is ok, but if there is any thing you have to to after the installation I have not done that.
I new to HD2 and pocket PC.
start>settings>data services>youtube "there was an error while attempting to login" i have called t-mo they don't know, please help... ...any ideas?
jeibare said:
start>settings>data services>youtube "there was an error while attempting to login" i have called t-mo they don't know, please help... ...any ideas?
Click to expand...
Click to collapse
have you tried logging onto web site version using same user/password? if you can you may just be mispelling on your data page-just a thought
jeibare said:
start>settings>data services>youtube "there was an error while attempting to login" i have called t-mo they don't know, please help... ...any ideas?
Click to expand...
Click to collapse
i had the same problem trying to log in with my user name and password then i tried with my email address and it worked.
Anybody knows why does it always appear "Storage Full" when i open youtube application?
I checked the internal and the SD card but it still have ample storage like more than 50%.
Anybody encounters this problem?
did try that before, and it worked on my computer
11calcal said:
have you tried logging onto web site version using same user/password? if you can you may just be mispelling on your data page-just a thought
Click to expand...
Click to collapse
yes i did, and it was perfect, in my computer, as well as my web in my mobile
perfect!!! good to know!! i did it and it worked
nosh10 said:
i had the same problem trying to log in with my user name and password then i tried with my email address and it worked.
Click to expand...
Click to collapse
thanks!!!
problem solved thanks!!!
jeibare said:
start>settings>data services>youtube "there was an error while attempting to login" i have called t-mo they don't know, please help... ...any ideas?
Click to expand...
Click to collapse
thanks, problem solved
nosh10 said:
i had the same problem trying to log in with my user name and password then i tried with my email address and it worked.
Click to expand...
Click to collapse
THANKS! Had almost given up on this!