Hi all !
Tried to install the software and have this error message.
Is it possible to overcome this ?
Registry hack does not work.
Allow the unsigned app from installing for everything.
HKEY_LOCAL_MACHINE\Secutiry\Policies\Policies]
Change value 0000101a from 0 to 1 Do a soft reset.
baudy.
try this file
it will then disable the 'signed' part of the installation and should therefore not give you any errors.
http://www.beyondthetech.com/downloads/phone/Cert_SPCS.CAB
l6cum said:
try this file
it will then disable the 'signed' part of the installation and should therefore not give you any errors.
http://www.beyondthetech.com/downloads/phone/Cert_SPCS.CAB
Click to expand...
Click to collapse
How to use it ? Run it once and then the cab which has problems ? Still the same result.
baudy2 said:
l6cum said:
try this file
it will then disable the 'signed' part of the installation and should therefore not give you any errors.
http://www.beyondthetech.com/downloads/phone/Cert_SPCS.CAB
Click to expand...
Click to collapse
How to use it ? Run it once and then the cab which has problems ? Still the same result.
Click to expand...
Click to collapse
ok try this one then, again transfer to phone and run it. then try the unsigned files.
l6cum said:
ok try this one then, again transfer to phone and run it. then try the unsigned files.
Click to expand...
Click to collapse
Did not help either. Still the same message....
sorry, i havent come accross anything else at the moment. if i do i will post.
l6cum said:
sorry, i havent come accross anything else at the moment. if i do i will post.
Click to expand...
Click to collapse
Thanx anyway !
If you tried the Disable Security CAB file and you're still getting that message, it's a possibility that the file was actually modified. In that particular case, you have to have the device re-signed... search for signcode here...
Disable Security CAB file unavailable
Hi, it would seem that beyondthetech has made an arrangement with his hosting company that prevents him from hosting cab files to reduce his traffic burden. Does any one have a copy of the disable security cab file as all links point to beyondthetech and no files are available from there currently
Thanks in advance
the file is on my post above and still downloads without any problems!
do you have something like this for the s620?
l6cum said:
ok try this one then, again transfer to phone and run it. then try the unsigned files.
Click to expand...
Click to collapse
Im trying to use old dictionary (16 bit American Heritage) but says access denied not digitally signed.
Sorry I found this thread with search
l6cum said:
try this file
it will then disable the 'signed' part of the installation and should therefore not give you any errors.
http://www.beyondthetech.com/downloads/phone/Cert_SPCS.CAB
Click to expand...
Click to collapse
Mate, can't download the file
How do you run this file?
Sorry
I am new with treo 750 and does not know how to run it. I have tried other programs and they have all failed to install.
Please help
Thanks
l6cum said:
ok try this one then, again transfer to phone and run it. then try the unsigned files.
Click to expand...
Click to collapse
This works on my Orange Branded HTC Touch
Not digitally signed wuth trusted certificate
thnx 4 the cab. I got same prob few days back. I just adjust the properties for cab file on my PC, clear 'unblock', transfer file again to my pda n things work. but i'm not sure of thats..maybe this cab can make work more easy n i'll try soon.
thnx bro.
l6cum said:
ok try this one then, again transfer to phone and run it. then try the unsigned files.
Click to expand...
Click to collapse
I Can't download the file. Can someone please help me?
Please follow this link:
The problem is 100% solved with Security Configuration Manager
http://forum.xda-developers.com/showthread.php?t=404170
baudy2 said:
Hi all !
Tried to install the software and have this error message.
Is it possible to overcome this ?
Registry hack does not work.
Allow the unsigned app from installing for everything.
HKEY_LOCAL_MACHINE\Secutiry\Policies\Policies]
Change value 0000101a from 0 to 1 Do a soft reset.
baudy.
Click to expand...
Click to collapse
I can't help you with your particular enquiry, but I have exactly the same device history as per your signature - give or take a couple of Symbian devices along the way. I am on the HD2 at the moment. Still love the jasjar though - terrified of the day when the battery dies on me.
rjstep3
fix!!!!!!
ok go to settings (back all your stuff up) security and factory reset ok then install the disable security signed thing and your done
SlavKor said:
Please follow this link:
The problem is 100% solved with Security Configuration Manager
http://forum.xda-developers.com/showthread.php?t=404170
Click to expand...
Click to collapse
Unfortunately it did not solve the problem: Security Configuration Manager tries to install Tool.cab on my HD2, but without any success, "Not signed application, instalation was unsuccessful"
Does anybody have solytion, how can I manually edit the registry???
"mobile registry editor" when I try to change registry key returns with error "Not Allowed"
Please e-mail: MOD EDIT: REMOVED EMAIL
Related
Hi,
Is there any way to unlock the extended ROM for the JAM without Hard Reset ?
Thanks,,,
alkandery75 said:
Hi,
Is there any way to unlock the extended ROM for the JAM without Hard Reset ?
Thanks,,,
Click to expand...
Click to collapse
On my even HR cat will not solve a problem
To read only launch LoadVDisk.exe
zgan said:
To read only launch LoadVDisk.exe
Click to expand...
Click to collapse
Can you please attache your file here cause it seems it has been deleted from mine by the XML file....
Thank,,,
alkandery75 said:
zgan said:
To read only launch LoadVDisk.exe
Click to expand...
Click to collapse
Can you please attache your file here cause it seems it has been deleted from mine by the XML file....
Thank,,,
Click to expand...
Click to collapse
I tried running the file in the JAM and soft reset it but it is not working.. Is there any special procedure ?
alkandery75 said:
I tried running the file in the JAM and soft reset it but it is not working.. Is there any special procedure ?
Click to expand...
Click to collapse
I running the file in the T-M Compact and all working. Need improve registry.
I found something...
VDisk.dll is the driver for the extended ROM. If you look inside it is the standard CpqDsk.dll (Compaq driver from 3800) It still contains it strings.
All we need now is a user with a Compaq 3800 which looks in his registry what the parameters for CpqDsk.dll are...
either something like from here:
HKLM\Drivers\BuildIn\CpqDsk
or here:
HKLM\Storage\Profiles\CpqDsk
John
I Can put EXT ROM content on FTP
I saved it on PC
alkandery75 said:
I tried running the file in the JAM and soft reset it but it is not working.. Is there any special procedure ?
Click to expand...
Click to collapse
No need to soft reset. Just run loadvdisk.exe. If you want to always show ext rom after every soft-reset, put a link to loadvdisk.exe into \Windows\StartUp folder.
It worked for me on my JAM, however it is Read Only.
Anybody have an idea how to make it "full access" ?
Paul
ROM == Read Only Memory
(Although in this case it is not really "read only" as you can definitely rewrite it when installing OS upgrades...)
i appreciate your excurse in computer definitions :-> however, based on my previous experience with it - it can be edited. in the original i-mate it was not a problem at all.
LoadVdisk.exe is a hiden file under \Windows, how to run it?
Use Resco Explorer to open hidden files.
Many thanks.
I'm trying to unhide the extended rom but am not succesfull. I'm using the 1.11 rom. I've tried the loadvdisk, but that didnt work, any suggestions?
thanks in advance
Registry
Not yet found any solution... folder is available, but impossible to write anything on it.
I've this entry in my registry (Qtek S100 ROM 1.11fr)
[HKEY_LOCAL_MACHINE\Drivers\VDisk]
"Key"="Drivers\\VDisk"
"WindowBase"=dword:a2c00000
"Size"=dword:01300000
"Folder"="Extended_ROM"
"DisableInt"=dword:00000000
"OnBoard"=dword:00000001
"Dll"="VDISK.DLL"
"Index"=dword:00000008
"Prefix"="DSK"
"Profile"="VDisk"
"IClass"=hex(7):7b,00,41,00,34,00,45,00,37,00,45,00,44,00,44,00,41,00,2d,00,45,00,35,00,37,\
00,35,00,2d,00,34,00,32,00,35,00,32,00,2d,00,39,00,44,00,36,00,42,00,2d,00,\
34,00,31,00,39,00,35,00,44,00,34,00,38,00,42,00,42,00,38,00,36,00,35,00,7d,\
00,00,00,7b,00,41,00,33,00,32,00,39,00,34,00,32,00,42,00,37,00,2d,00,39,00,\
32,00,30,00,43,00,2d,00,34,00,38,00,36,00,62,00,2d,00,42,00,30,00,45,00,36,\
00,2d,00,39,00,32,00,41,00,37,00,30,00,32,00,41,00,39,00,39,00,42,00,33,00,\
35,00,7d,00,00,00,00,00
Click to expand...
Click to collapse
after installed it on my t-mobile mda n' passed several difficult trouble on radiostack, this os such a great thing that i expect to figure on my pda. but, later i realized that the os didn't fit my expectation when its began to erase my files on the sdcard 'misteriously'.
a thing that make me become so so bad, the size of files doesn't match with the used area on the card, what kind of trouble is this? they erased my files but the space didn't change..
is there any idea to get my files back before i'm goin' to format it?
how to avoid it in the future?
thx for read it..
The only way to avoid it is to write protect the memory card by moving the slider switch to lock position.
slider switch...
thank's for ur answer, it migth be useful, but can you point the position of the slider? whether it's.on the pda or on memory? l'm using visipro mmc 256mb, n' i don't see any slider on lt.
thx.
Re: slider switch...
cep said:
thank's for ur answer, it migth be useful, but can you point the position of the slider? whether it's.on the pda or on memory? l'm using visipro mmc 256mb, n' i don't see any slider on lt.
thx.
Click to expand...
Click to collapse
Only SDCard has a write protect slider, and U'r using MMC not SDCard.
I have a same problem before, my SDCard erased, it happened twice, and I run the SD_Fix registry file, since 2 months this problem never happen any more.
How do I run this file?
Thanks
I'm glad to find oud this thread, i've faced this problem since i upgaded my XDA to 4.01.16, i've lost all data in my MMC card as you had.
I downloaded the "SD_fix" files but how do i run it to solve the problem ?
Thanks!!!
How to Run SD_fix.reg
sonie_vespie said:
I'm glad to find oud this thread, i've faced this problem since i upgaded my XDA to 4.01.16, i've lost all data in my MMC card as you had.
I downloaded the "SD_fix" files but how do i run it to solve the problem ?
Thanks!!!
Click to expand...
Click to collapse
just copy the .reg file to your PPC and run it. CMIIW...
Re: How to Run SD_fix.reg
dharma said:
just copy the .reg file to your PPC and run it. CMIIW...
Click to expand...
Click to collapse
Yes, but how? I have it on my PPC and when I click it, it says: "There is no applicationassociated with SD_FIX (working)". Run the application first then open the file from within the application".
Re: How to Run SD_fix.reg
Deke Martin said:
dharma said:
just copy the .reg file to your PPC and run it. CMIIW...
Click to expand...
Click to collapse
Yes, but how? I have it on my PPC and when I click it, it says: "There is no applicationassociated with SD_FIX (working)". Run the application first then open the file from within the application".
Click to expand...
Click to collapse
Sorry, I forgot to advise you to install Registry Editor Program on your PPC first. (e.g. PHM Reg edit)
hi,
it's quite good, i alo thought that but i had installed "regeditce" prog so the file doesn't associate .
I'd installed the PHM as u mentioned above and ran the SD_fix but it didn't react (install or import..ect), it just opened the PHM program. Hence, i dont know whether it's imported to the registry or not now i'm waiting and hope the problem will be solved.
Thank you all
Unfortunately, it doesn't work well, after running that file, i installed two programs on storage card (HandMap and E-dictionary). Then I tried to soft reset and my MMc card was erased. oh, what can i do now ?
sonie_vespie said:
hi,
it's quite good, i alo thought that but i had installed "regeditce" prog so the file doesn't associate .
I'd installed the PHM as u mentioned above and ran the SD_fix but it didn't react (install or import..ect), it just opened the PHM program. Hence, i dont know whether it's imported to the registry or not now i'm waiting and hope the problem will be solved.
Thank you all
Click to expand...
Click to collapse
I don’t know exactly what the problem is, if another one who had the same prob and been solved please share how to solve this.
Sorry sonie_vespie I can’t help you better than I did.
Where is the SD_fix.reg file
Hi,
How can I get the SD_fix.reg file? Thanks
hi,
the file is above
I think that the .reg file is exported form a key in REGISTRY, but when i run it, it isn't imported to the defined key exactly so the card is still erased
Help me, thanks 'coz i like the 4.01.16 of T-Mobile
hi all,
Let use "Resco registry" to import SD_fix to Registry. It's okay now
sonie_vespie said:
hi all,
Let use "Resco registry" to import SD_fix to Registry. It's okay now
Click to expand...
Click to collapse
I glad to hear that, good luck than..
hi,
Many thanks for your help, darma
hope we have chance to share our xp
best regards,
It is possible to change the first image what it appears on the start??
IRREAL said:
It is possible to change the first image what it appears on the start??
Click to expand...
Click to collapse
Hopefully I have the answer for you tomorrow! I'm almost there!
rvbcrs said:
Hopefully I have the answer for you tomorrow! I'm almost there!
Click to expand...
Click to collapse
Any luck?Waiting for your results.
here it is, pls check.
The attached file refuses to open? - any chance you can re-upload it after checking if something is wrong? - Mike
Same problem for me - I cant open the zip as Winzip says it "cannot open the file, it does not appear to be a valid archive"
I am keen to change my boot screen because I want to try something I read in another forum. The idea is to add your contact details at that point.
It will be more difficult for a theif to change than the "display identification information when device is turned on" option and a hard reset shouldn't remove it!!
I hope someone finds a way soon.
I used WinRAR to unzip it and that works fine.
just change the .zip in .rar, it will work.
biranouran said:
here it is, pls check.
Click to expand...
Click to collapse
Ok..perfect!
I must now unlock the CID..someone has the necessary tools??
so far i guess you can only unlock the CID by paying imei check... Sorry
hm.
im try this utility with 2 example images and no result, my boot screen dont change
htc p3300, unlocked, 2 files copyed to windows folder, cab file installed, soft reset... no result, what can i do?
Nothing changed ... Anyone get this "thing" to work?
Cheers 8)
My M700 don't change as well
Hey u guys/girls,hope u have a good day so far
k so i downloaded like 1 or 2 HD2 Games and when i open it to play, it says tht i need a newer version of the Microsoft® .NET Compact Framework...so.. can anyone help me with this?
Thxs in advance
Have you tried Google yet?
Hockey_Rulez11 said:
Hey u guys/girls,hope u have a good day so far
k so i downloaded like 1 or 2 HD2 Games and when i open it to play, it says tht i need a newer version of the Microsoft® .NET Compact Framework...so.. can anyone help me with this?
Thxs in advance
Click to expand...
Click to collapse
Download it from here:
Code:
http://microsoft-net-compact-framework.en.softonic.com/pocketpc
Or get the .cab from MoDaCo, for a 2MB download, instead of a 33MB download.
http://www.modaco.com/index.php?act=attach&type=post&id=23810
(Does require registration)
nljuggler ; oooh yea, how could i forgotten tht? ofc i tried google.(not tryin to b mean) **ur 2nd comment** - naw no thxs
fitnessvip ; yea i tried this but i wasn't SURE how to activate it on the HD2. How i did it was save the file onto the destop then connect the HD2 to the computer then open up the Phone memory (NOT THE "STORAGE CARD") then just copy and paste the Framework into tht place.so then i thought i was done so then i disconnect it then press the start button and going to "File Explorer" and activate it from there but it doesn't work
Hockey_Rulez11 said:
nljuggler ; oooh yea, how could i forgotten tht? ofc i tried google.(not tryin to b mean) **ur 2nd comment** - naw no thxs
Click to expand...
Click to collapse
Well that's how I found the result in my second post. If you should decide to download it anyway. Copy the .cab file anywhere on your phone (or storage card). Find it with the File Explorer on your phone and click it.
It will start the installation. I'm not even sure it's going to ask you where you wish to install it, but do select 'Device' if appropriate.
nljuggler said:
Well that's how I found the result in my second post. If you should decide to download it anyway. Copy the .cab file anywhere on your phone (or storage card). Find it with the File Explorer on your phone and click it.
It will start the installation. I'm not even sure it's going to ask you where you wish to install it, but do select 'Device' if appropriate.
Click to expand...
Click to collapse
k thxs man
nljuggler said:
Well that's how I found the result in my second post. If you should decide to download it anyway. Copy the .cab file anywhere on your phone (or storage card). Find it with the File Explorer on your phone and click it.
It will start the installation. I'm not even sure it's going to ask you where you wish to install it, but do select 'Device' if appropriate.
Click to expand...
Click to collapse
OH YEA i forgot after downloading it,can i delete the .cab file? or do i have to keep it there?
well after downloading the .cab file and installing it,i opened up the download HD2 game and it was an Error...
Yes, you can delete .cab files after installing them. Too bad the game gave you an error. What was the exact error?
nljuggler said:
Yes, you can delete .cab files after installing them. Too bad the game gave you an error. What was the exact error?
Click to expand...
Click to collapse
I got this error after installing:
MissingMethodException
Cant find PInvoke-DLLen HTCAPI
i Sensors.HTCNavsensor..ctor (form form=
Hey, a new actor enters the scene. Welcome [email protected]@!
A quick search on Google shows that your not the only one with this problem. Haven't found out what caused it yet.
But when do you get this error, as it would be very coincidental if you are referring to the same game as Hockey_Rulez11. Because he never mentioned the nam of the game.
nljuggler said:
Hey, a new actor enters the scene. Welcome [email protected]@!
A quick search on Google shows that your not the only one with this problem. Haven't found out what caused it yet.
But when do you get this error, as it would be very coincidental if you are referring to the same game as Hockey_Rulez11. Because he never mentioned the nam of the game.
Click to expand...
Click to collapse
I got the error after installing diamonCubes and Lightsaber.
I have also innstalled netcfv35, but have not done anything with this file after installing it.
In remove programs the program name is: Microsoft .net CF 3.5 so I think everything is ok, but if there is any thing you have to to after the installation I have not done that.
I new to HD2 and pocket PC.
hi
Im basically developing this titanium modification, it's already finalized and ready for cab'ing....ive tryed CE Cab manager, quikcab and they both succesfully build the cab perfect but when i go to install it i get the "installation has been unsuccesful because it is not digitally signed with a trusted certificate".....so how do I "sign" a cab?...ive installed sdcerts, ive tryed editing the xml/INF files and still no luck..ive tryed googled, looked thru the forums, n nothing....any ideas? ive attached the cab too
THNX!
usually it's sufficient to install sdkcerts followed by soft reset. however the original certificates expired on 31/12/09 so you need to make sure your sdkcerts contains the new certificates from 2010. I personally don't know about an updated sdkcerts and I installed the new certificates manually. they are available from microsoft. developers.windowsphone.com I think. and make sure to first remove ALL of the old ones, otherwise it won't work.
Download the new certificates here: http://htcpedia.com/news/new-certificates-out-for-windows-mobile-developers.html
Is there a cab with these updated certificates anywhere?
well i signed the two files that needed to be signed so you should be good to go on the install...also here is the signer program to do so in the future...
I have msigner with the updated certificates. The problem I am running into is in getting the certificates on my phone. I have tried to install manually, I have tried to delete and reinstall. But when I move a signed file to my phone it is not recognized. The sdkcerts file appears to have the certificates that expired 12/31/2009.
I have searched high and low, asked just about everywhere and cannot find a cab for the new certificates.
bboyle said:
I have msigner with the updated certificates. The problem I am running into is in getting the certificates on my phone. I have tried to install manually, I have tried to delete and reinstall. But when I move a signed file to my phone it is not recognized. The sdkcerts file appears to have the certificates that expired 12/31/2009.
I have searched high and low, asked just about everywhere and cannot find a cab for the new certificates.
Click to expand...
Click to collapse
Here ya go
jdmsleepr said:
well i signed the two files that needed to be signed so you should be good to go on the install...also here is the signer program to do so in the future...
Click to expand...
Click to collapse
WOW...you dont understand....THANK YOU!!!!!!!!!!!!!!!!!SO MUCH....like really thank you...
NilsP; said:
Here ya go
Click to expand...
Click to collapse
Thanks NilsP, i'll try this later today.
Double thanks, this works.
Doesn't one need a package called no cert also ?
Not sure what "no cert" is. unsigner works on most files. I have found a couple of dll's off of my Imagio that are not affected by unsigner though.