Database Users

wm2003 4.01.12 deleted my files?

after installed it on my t-mobile mda n' passed several difficult trouble on radiostack, this os such a great thing that i expect to figure on my pda. but, later i realized that the os didn't fit my expectation when its began to erase my files on the sdcard 'misteriously'.
a thing that make me become so so bad, the size of files doesn't match with the used area on the card, what kind of trouble is this? they erased my files but the space didn't change..
is there any idea to get my files back before i'm goin' to format it?
how to avoid it in the future?
thx for read it..

The only way to avoid it is to write protect the memory card by moving the slider switch to lock position.

slider switch...
thank's for ur answer, it migth be useful, but can you point the position of the slider? whether it's.on the pda or on memory? l'm using visipro mmc 256mb, n' i don't see any slider on lt.
thx.

Re: slider switch...
cep said:
thank's for ur answer, it migth be useful, but can you point the position of the slider? whether it's.on the pda or on memory? l'm using visipro mmc 256mb, n' i don't see any slider on lt.
thx.
Click to expand...
Click to collapse
Only SDCard has a write protect slider, and U'r using MMC not SDCard.
I have a same problem before, my SDCard erased, it happened twice, and I run the SD_Fix registry file, since 2 months this problem never happen any more.

How do I run this file?
Thanks

I'm glad to find oud this thread, i've faced this problem since i upgaded my XDA to 4.01.16, i've lost all data in my MMC card as you had.
I downloaded the "SD_fix" files but how do i run it to solve the problem ?
Thanks!!!

How to Run SD_fix.reg
sonie_vespie said:
I'm glad to find oud this thread, i've faced this problem since i upgaded my XDA to 4.01.16, i've lost all data in my MMC card as you had.
I downloaded the "SD_fix" files but how do i run it to solve the problem ?
Thanks!!!
Click to expand...
Click to collapse
just copy the .reg file to your PPC and run it. CMIIW...

Re: How to Run SD_fix.reg
dharma said:
just copy the .reg file to your PPC and run it. CMIIW...
Click to expand...
Click to collapse
Yes, but how? I have it on my PPC and when I click it, it says: "There is no applicationassociated with SD_FIX (working)". Run the application first then open the file from within the application".

Re: How to Run SD_fix.reg
Deke Martin said:
dharma said:
just copy the .reg file to your PPC and run it. CMIIW...
Click to expand...
Click to collapse
Yes, but how? I have it on my PPC and when I click it, it says: "There is no applicationassociated with SD_FIX (working)". Run the application first then open the file from within the application".
Click to expand...
Click to collapse
Sorry, I forgot to advise you to install Registry Editor Program on your PPC first. (e.g. PHM Reg edit)

hi,
it's quite good, i alo thought that but i had installed "regeditce" prog so the file doesn't associate .
I'd installed the PHM as u mentioned above and ran the SD_fix but it didn't react (install or import..ect), it just opened the PHM program. Hence, i dont know whether it's imported to the registry or not now i'm waiting and hope the problem will be solved.
Thank you all

Unfortunately, it doesn't work w­ell, after running that file, i installed two programs on storage card (HandMap and E-dictionary). Then I tried to soft reset and my MMc card was erased. oh, what can i do now ?

sonie_vespie said:
hi,
it's quite good, i alo thought that but i had installed "regeditce" prog so the file doesn't associate .
I'd installed the PHM as u mentioned above and ran the SD_fix but it didn't react (install or import..ect), it just opened the PHM program. Hence, i dont know whether it's imported to the registry or not now i'm waiting and hope the problem will be solved.
Thank you all
Click to expand...
Click to collapse
I don’t know exactly what the problem is, if another one who had the same prob and been solved please share how to solve this.
Sorry sonie_vespie I can’t help you better than I did.

Where is the SD_fix.reg file
Hi,
How can I get the SD_fix.reg file? Thanks

hi,
the file is above
I think that the .reg file is exported form a key in REGISTRY, but when i run it, it isn't imported to the defined key exactly so the card is still erased
Help me, thanks 'coz i like the 4.01.16 of T-Mobile

hi all,
Let use "Resco registry" to import SD_fix to Registry. It's okay now

sonie_vespie said:
hi all,
Let use "Resco registry" to import SD_fix to Registry. It's okay now
Click to expand...
Click to collapse
I glad to hear that, good luck than..

hi,
Many thanks for your help, darma
hope we have chance to share our xp
best regards,

"Not digitally signed wuth trusted certificate"

Hi all !
Tried to install the software and have this error message.
Is it possible to overcome this ?
Registry hack does not work.
Allow the unsigned app from installing for everything.
HKEY_LOCAL_MACHINE\Secutiry\Policies\Policies]
Change value 0000101a from 0 to 1 Do a soft reset.
baudy.

try this file
it will then disable the 'signed' part of the installation and should therefore not give you any errors.
http://www.beyondthetech.com/downloads/phone/Cert_SPCS.CAB

l6cum said:
try this file
it will then disable the 'signed' part of the installation and should therefore not give you any errors.
http://www.beyondthetech.com/downloads/phone/Cert_SPCS.CAB
Click to expand...
Click to collapse
How to use it ? Run it once and then the cab which has problems ? Still the same result.

baudy2 said:
l6cum said:
try this file
it will then disable the 'signed' part of the installation and should therefore not give you any errors.
http://www.beyondthetech.com/downloads/phone/Cert_SPCS.CAB
Click to expand...
Click to collapse
How to use it ? Run it once and then the cab which has problems ? Still the same result.
Click to expand...
Click to collapse
ok try this one then, again transfer to phone and run it. then try the unsigned files.

l6cum said:
ok try this one then, again transfer to phone and run it. then try the unsigned files.
Click to expand...
Click to collapse
Did not help either. Still the same message....

sorry, i havent come accross anything else at the moment. if i do i will post.

l6cum said:
sorry, i havent come accross anything else at the moment. if i do i will post.
Click to expand...
Click to collapse
Thanx anyway !

If you tried the Disable Security CAB file and you're still getting that message, it's a possibility that the file was actually modified. In that particular case, you have to have the device re-signed... search for signcode here...

Disable Security CAB file unavailable
Hi, it would seem that beyondthetech has made an arrangement with his hosting company that prevents him from hosting cab files to reduce his traffic burden. Does any one have a copy of the disable security cab file as all links point to beyondthetech and no files are available from there currently
Thanks in advance

the file is on my post above and still downloads without any problems!

do you have something like this for the s620?
l6cum said:
ok try this one then, again transfer to phone and run it. then try the unsigned files.
Click to expand...
Click to collapse
Im trying to use old dictionary (16 bit American Heritage) but says access denied not digitally signed.
Sorry I found this thread with search

l6cum said:
try this file
it will then disable the 'signed' part of the installation and should therefore not give you any errors.
http://www.beyondthetech.com/downloads/phone/Cert_SPCS.CAB
Click to expand...
Click to collapse
Mate, can't download the file

How do you run this file?
Sorry
I am new with treo 750 and does not know how to run it. I have tried other programs and they have all failed to install.
Please help

Thanks
l6cum said:
ok try this one then, again transfer to phone and run it. then try the unsigned files.
Click to expand...
Click to collapse
This works on my Orange Branded HTC Touch

Not digitally signed wuth trusted certificate
thnx 4 the cab. I got same prob few days back. I just adjust the properties for cab file on my PC, clear 'unblock', transfer file again to my pda n things work. but i'm not sure of thats..maybe this cab can make work more easy n i'll try soon.
thnx bro.

l6cum said:
ok try this one then, again transfer to phone and run it. then try the unsigned files.
Click to expand...
Click to collapse
I Can't download the file. Can someone please help me?

Please follow this link:
The problem is 100% solved with Security Configuration Manager
http://forum.xda-developers.com/showthread.php?t=404170

baudy2 said:
Hi all !
Tried to install the software and have this error message.
Is it possible to overcome this ?
Registry hack does not work.
Allow the unsigned app from installing for everything.
HKEY_LOCAL_MACHINE\Secutiry\Policies\Policies]
Change value 0000101a from 0 to 1 Do a soft reset.
baudy.
Click to expand...
Click to collapse
I can't help you with your particular enquiry, but I have exactly the same device history as per your signature - give or take a couple of Symbian devices along the way. I am on the HD2 at the moment. Still love the jasjar though - terrified of the day when the battery dies on me.
rjstep3

fix!!!!!!
ok go to settings (back all your stuff up) security and factory reset ok then install the disable security signed thing and your done

SlavKor said:
Please follow this link:
The problem is 100% solved with Security Configuration Manager
http://forum.xda-developers.com/showthread.php?t=404170
Click to expand...
Click to collapse
Unfortunately it did not solve the problem: Security Configuration Manager tries to install Tool.cab on my HD2, but without any success, "Not signed application, instalation was unsuccessful"
Does anybody have solytion, how can I manually edit the registry???
"mobile registry editor" when I try to change registry key returns with error "Not Allowed"
Please e-mail: MOD EDIT: REMOVED EMAIL

Extended ROM Unlock tutorial

Hi,
Can someone point me to a simple Extended ROM Unlock tutorial because I just can't manage to find my way through the Forum.
I'de like to place my favorite apps in ROM...
Thanx
The General

GeneralPatton said:
Hi,
Can someone point me to a simple Extended ROM Unlock tutorial because I just can't manage to find my way through the Forum.
I'de like to place my favorite apps in ROM...
Thanx
The General
Click to expand...
Click to collapse
well general, depends on the OS you are using..
if you have rom version 1.6.x.x it won't work easy yet.
the pre 1.6.x.x roms are quite simple, download totalcommander for ppc, install it, run it, in the adress-bar type "\extended_rom\" without the " " 's, and voila, there they are..
good luck..
ps.
the search button on top of this page would give the oppertunity to search for words as extended rom in de wizard forums.. :wink:

Ok
Thanx works fine with TC
Just a last question, all cabs i place in extended_rom will install automatically after hard reset ?
'cause I saw i had a autorun.exe file in there and some sutomization cabs that install after Hardreset ???
Thanks
The General

Re: Ok
GeneralPatton said:
Thanx works fine with TC
Just a last question, all cabs i place in extended_rom will install automatically after hard reset ?
'cause I saw i had a autorun.exe file in there and some sutomization cabs that install after Hardreset ???
Thanks
The General
Click to expand...
Click to collapse
There's a config file in there too (can't remember it's name off hand, but it's fairly obvious). This has a list of the cab files to install after a hard reset. I guess you'd need to add your cab files to that list as well as copying them to extended ROM.
Dox

Re: Ok
GeneralPatton said:
Thanx works fine with TC
Just a last question, all cabs i place in extended_rom will install automatically after hard reset ?
'cause I saw i had a autorun.exe file in there and some sutomization cabs that install after Hardreset ???
Thanks
The General
Click to expand...
Click to collapse
depends, some have a config.txt file, if you open this one and edit it to your
needs, the files you put into it will be installed after hard reset, if you
set the right parameters from the txt file.
other roms have the autorun.exe wich installs all the files in the extrom.
i'm not sure anymore if this is right, but i believe that if you rename your
cab's like this:
applicationX.cab -> Default_applicationX.cab
it will install without any problems.
if you have problems with unsigned cabs, you can use the signed.patch
wich can be found on the ftp.

On my Cingular 8125 the extended ROM is write protected, does anyone know how do I remove the write-protection?

jsnipper said:
On my Cingular 8125 the extended ROM is write protected, does anyone know how do I remove the write-protection?
Click to expand...
Click to collapse
Only way around is to flash an older rom into your handset..

Re: Ok
nmx77 said:
GeneralPatton said:
Thanx works fine with TC
Just a last question, all cabs i place in extended_rom will install automatically after hard reset ?
'cause I saw i had a autorun.exe file in there and some sutomization cabs that install after Hardreset ???
Thanks
The General
Click to expand...
Click to collapse
depends, some have a config.txt file, if you open this one and edit it to your
needs, the files you put into it will be installed after hard reset, if you
set the right parameters from the txt file.
other roms have the autorun.exe wich installs all the files in the extrom.
i'm not sure anymore if this is right, but i believe that if you rename your
cab's like this:
applicationX.cab -> Default_applicationX.cab
it will install without any problems.
if you have problems with unsigned cabs, you can use the signed.patch
wich can be found on the ftp.
Click to expand...
Click to collapse
Hi
Could tell us where on the ftp we can found signed.patch?
Bye
Herc. 8)

Here it is
i couldn't find it on the ftp anymore as well..
i'll put it there again, but here it is for you

if it's that easy to get into extended rom, then why do people release the unlockers for extrom? i don't get it.

Ray_jai said:
if it's that easy to get into extended rom, then why do people release the unlockers for extrom? i don't get it.
Click to expand...
Click to collapse
you can access the files on the extended rom, but you can't edit any of the information there. you have to flash a new extended rom image for any changes to take effect. I think those that are looking at the extended rom unlockers is for a different purpose. I think I read somewhere that it let some people use the extended rom space as extra storage (~10 megs), but it messed up applications on the phone, especially the camera.
in general, it doesn't seem to be a good idea to unlock the extended rom. most rom builders look like they are trying to learn how to edit this properly to add it o their rom kitchens.

can one's extended rom go curropt?
after i heard about this, i went into extended rom just to see if it works.
and it did. i exited total commander and started to gather my anti theif program to get installed.
now I go back into extended rom, and everything became gibberish!
and when i click on something it says "error 3 Changing to dir!"
WTF is going on!
can someone help me out?

HTC P-3600 Extended Rom

hi to the list,
i would like to copy some programs in the Extended Rom of my new HTC P-3600 so when i format it,They will be automatically installed.
I have unhide the Extended Rom but when i try to copy a program file into the Extended Rom folder,i get an error that say like it is write protected.
Please anybody can tell me how to do?
Thanks in advance
Enzo

I know it won't help, but I have exactly the same problem...
I successfuly unhide ExtRom, but no way to write something in it...

Unlock not successfull
Hi all !
I tried to unlock extended ROM of my P3600 - but like another user in thread http://forum.xda-developers.com/showthread.php?t=273424&page=3&highlight=tytn+extended+rom - described - after changing the registry keys and soft reset the device - the registry keys show the original values and extended ROM is still hidden.
Would you be so kind and describe how unlocking the extended ROM worked with your device ?
Thanks in advance !
Gerhard

mdacfan said:
Hi all !
I tried to unlock extended ROM of my P3600 - but like another user in thread http://forum.xda-developers.com/showthread.php?t=273424&page=3&highlight=tytn+extended+rom - described - after changing the registry keys and soft reset the device - the registry keys show the original values and extended ROM is still hidden.
Would you be so kind and describe how unlocking the extended ROM worked with your device ?
Thanks in advance !
Gerhard
Click to expand...
Click to collapse
In another thread I read (don't recall which one) that you need to exit (not minimize) the registry editor prior to the soft reset, otherwise the changes in the registry won't stick.
Maybe this helps?

emay said:
In another thread I read (don't recall which one) that you need to exit (not minimize) the registry editor prior to the soft reset, otherwise the changes in the registry won't stick.
Maybe this helps?
Click to expand...
Click to collapse
Hi folks,
AFAIK in my opinion it is not necessary to close active applications instead of minimize, simply turn off the device and wait about 20 seconds before soft reset cause wm05 needs this time to flush the modify into the registry, or in alternative soft reset via a software instead stylus+hole. This is a known caratteristict of wm05 if you do a google search you'll find many threads about taht.
Hope this help, if I'm not wrong...
[email protected]

Unlock successfull
Many thanks - waiting about 20 seconds before soft reset worked fine. Now the extended ROM is visible. Still read only but i am optimistic.
Gerhard

wich key i have to modify to obtain my ROM visible ?

mdacfan said:
Many thanks - waiting about 20 seconds before soft reset worked fine. Now the extended ROM is visible. Still read only but i am optimistic.
Gerhard
Click to expand...
Click to collapse
Gerhard have you tried to copy somthing inside it'
I get that it is writ protected and cannot copy anything in it
Thanks
Enzo

Not possible to write into extended ROM
Hi Enzo !
The extended ROM is unhided but still write protected.
Greets,
Gerhard

mdacfan said:
Hi Enzo !
The extended ROM is unhided but still write protected.
Greets,
Gerhard
Click to expand...
Click to collapse
By doing this:
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\EXT_FLASHDRV\FATFS]
"EnableCache"=dword:00000001
Now i can del the extROM files, and write what ever i want, but when i do a softReset every thing is erased and the extROM files re-apear.
Anyone know what to do...

No Way!!!!!!!
jmarinheiro said:
By doing this:
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\EXT_FLASHDRV\FATFS]
"EnableCache"=dword:00000001
Now i can del the extROM files, and write what ever i want, but when i do a softReset every thing is erased and the extROM files re-apear.
Anyone know what to do...
Click to expand...
Click to collapse
I done how you said, and effectively i can copy any file i want into the extended rom but when i make a soft reset, whatever i have copied in it,
disappear.I mean i can see only the original files and nothing else.
I have also tried to copy three other files and with the Totalcommander i have marked them as read only.Made a soft reset but had the same results.
The three files were not any more visualized in the extended Rom.
Anybody had success to write into the Extended Rom without loosing the files after making a soft reset?
If yes which is the right procedure?
Thanks in advance.
Enzo

Install WM6 and use OliPro's OEM_FLASHDRV.DLL patch...

stepw said:
Install WM6 and use OliPro's OEM_FLASHDRV.DLL patch...
Click to expand...
Click to collapse
Where to get it?
Does it already exsist for the HTC P-36oo
Thanks
Enzo

jmarinheiro said:
By doing this:
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\EXT_FLASHDRV\FATFS]
"EnableCache"=dword:00000001
Now i can del the extROM files, and write what ever i want, but when i do a softReset every thing is erased and the extROM files re-apear.
Anyone know what to do...
Click to expand...
Click to collapse
Have the same Problem.
i can now write in it but when i make a reset the files are not any more in the extended rom.They are deleted.Tried also to mark them as read only before mare the reset but have the same results.
Anybody have a clue?
Thnaks.
Enzo.

Improve FM Radio Library Build 103.816

I think this FM Radio is improved as far as reception concerned. Less interference noticed overall. Back up the current library (just in case you don't like this one) from the Windows directory and replace it with the files in the zip.

Where does it come from ?

plopplop said:
Where does it come from ?
Click to expand...
Click to collapse
From udk's latest ROM

Is there a possibilitie to change the fm radio with a working wm6.1 rom already flashed because when i try to copy the files over the files on my device i get a error that i cant override them.

Ajacied410 said:
Is there a possibilitie to change the fm radio with a working wm6.1 rom already flashed because when i try to copy the files over the files on my device i get a error that i cant override them.
Click to expand...
Click to collapse
use total commander or resco explorer. Either will over-write the libraries.
It would be great to make a cab file out of it. Could anybody help with it?

mffu said:
use total commander or resco explorer. Either will over-write the libraries.
It would be great to make a cab file out of it. Could anybody help with it?
Click to expand...
Click to collapse
That depends - what are all the needed Registry entries ? It's simple enough to have all the files in the zip CAB'd to install in \Windows, but are there Registry entries needed beyond these ?

i tried it yesterday.Copy all files in Windows folder with resco,check version and see version number is ok.I listened to radio all night and havent a problem

ianl8888 said:
That depends - what are all the needed Registry entries ? It's simple enough to have all the files in the zip CAB'd to install in \Windows, but are there Registry entries needed beyond these ?
Click to expand...
Click to collapse
This library is complete. You can unzip it to the storage card, tap on the FM Radio.exe and it will work. I believe we need a cab maker. That type of program writes everything into the registry during the installation.

Thanks. I will try this one tonight ... ;-)

mffu said:
I believe we need a cab maker.
Click to expand...
Click to collapse
Here you go.
Tested. Works.
Sascha

The PDAViet rom also has version 1211.721 which also has better reception than the one on the stock rom. Now I can use my favourite headset which had poor reception, maybe due to shorter length than some crappy one I had

SaBo said:
Here you go.
Tested. Works.
Sascha
Click to expand...
Click to collapse
Doesn't work on my Cruise. Stock ROM. The App doesn't want to start.

Neither the cab not the zip works. I thought that my sprite backup would have the original Files from the rom,it does not. Does anyone have the stock radio files to get my radio working again?
TIA!
EDIT: It looks like I have lost the ability to launch the radio app. At this point, I really don't want to do a hard reset. Don't apply this update unless you are willing to lose this function.

victoradjei said:
The PDAViet rom also has version 1211.721 which also has better reception than the one on the stock rom. Now I can use my favourite headset which had poor reception, maybe due to shorter length than some crappy one I had
Click to expand...
Click to collapse
this is the default version that i have on my HTC Polaris/Cruise.

I'd like to backup my files before copying the new one but can't copy fms_api.dll, even using Resco explorer...

Doesn't work on my Cruise. Raramomo ROM. The App doesn't want to start.
Has somebody a cab of the original radio ?

LIPA said:
Doesn't work on my Cruise. Raramomo ROM. The App doesn't want to start.
Click to expand...
Click to collapse
What application doesn't start?
The CAB can only be installed if you turn certification off.
I don't know if this is possible with all stock ROMs.
Sascha

SaBo said:
What application doesn't start?
The CAB can only be installed if you turn certification off.
I don't know if this is possible with all stock ROMs.
Sascha
Click to expand...
Click to collapse
The FMRadio.exe does not start. The cab was installed properly without issue.

mffu said:
That type of program writes everything into the registry during the installation.
Click to expand...
Click to collapse
Yes, I know that - it was the point of my post.
But what I asked is: "Are there any other Registry entries that need updating ?"
The answer seems to be - apparently not, since another post reported it as working by just copying the unzipped files into \Windows ... but other posts reported this as not working.
Generating a CAB is easy of course, making sure it actually works may be harder.

E.Bonobox said:
this is the default version that i have on my HTC Polaris/Cruise.
Click to expand...
Click to collapse
The FM Radio I posted is better than the PDAViet's one. I have less interference or static after I upgraded to it. I am on PDAViets's 06 build and I get a clear and crisp signal off the stations I had the crappy static with the original build.
And YES, you got to have the security policies changed in order to overwrite some files in the Windows directory. Search for the SDA Application unlocker. That should fix the problem with upgrading.
In my first post I mentioned about backing up the original files. If you happened to fail doing so, try to find Dutty's FM Radio cab.
Thank you!