I think this FM Radio is improved as far as reception concerned. Less interference noticed overall. Back up the current library (just in case you don't like this one) from the Windows directory and replace it with the files in the zip.
Where does it come from ?
plopplop said:
Where does it come from ?
Click to expand...
Click to collapse
From udk's latest ROM
Is there a possibilitie to change the fm radio with a working wm6.1 rom already flashed because when i try to copy the files over the files on my device i get a error that i cant override them.
Ajacied410 said:
Is there a possibilitie to change the fm radio with a working wm6.1 rom already flashed because when i try to copy the files over the files on my device i get a error that i cant override them.
Click to expand...
Click to collapse
use total commander or resco explorer. Either will over-write the libraries.
It would be great to make a cab file out of it. Could anybody help with it?
mffu said:
use total commander or resco explorer. Either will over-write the libraries.
It would be great to make a cab file out of it. Could anybody help with it?
Click to expand...
Click to collapse
That depends - what are all the needed Registry entries ? It's simple enough to have all the files in the zip CAB'd to install in \Windows, but are there Registry entries needed beyond these ?
i tried it yesterday.Copy all files in Windows folder with resco,check version and see version number is ok.I listened to radio all night and havent a problem
ianl8888 said:
That depends - what are all the needed Registry entries ? It's simple enough to have all the files in the zip CAB'd to install in \Windows, but are there Registry entries needed beyond these ?
Click to expand...
Click to collapse
This library is complete. You can unzip it to the storage card, tap on the FM Radio.exe and it will work. I believe we need a cab maker. That type of program writes everything into the registry during the installation.
Thanks. I will try this one tonight ... ;-)
mffu said:
I believe we need a cab maker.
Click to expand...
Click to collapse
Here you go.
Tested. Works.
Sascha
The PDAViet rom also has version 1211.721 which also has better reception than the one on the stock rom. Now I can use my favourite headset which had poor reception, maybe due to shorter length than some crappy one I had
SaBo said:
Here you go.
Tested. Works.
Sascha
Click to expand...
Click to collapse
Doesn't work on my Cruise. Stock ROM. The App doesn't want to start.
Neither the cab not the zip works. I thought that my sprite backup would have the original Files from the rom,it does not. Does anyone have the stock radio files to get my radio working again?
TIA!
EDIT: It looks like I have lost the ability to launch the radio app. At this point, I really don't want to do a hard reset. Don't apply this update unless you are willing to lose this function.
victoradjei said:
The PDAViet rom also has version 1211.721 which also has better reception than the one on the stock rom. Now I can use my favourite headset which had poor reception, maybe due to shorter length than some crappy one I had
Click to expand...
Click to collapse
this is the default version that i have on my HTC Polaris/Cruise.
I'd like to backup my files before copying the new one but can't copy fms_api.dll, even using Resco explorer...
Doesn't work on my Cruise. Raramomo ROM. The App doesn't want to start.
Has somebody a cab of the original radio ?
LIPA said:
Doesn't work on my Cruise. Raramomo ROM. The App doesn't want to start.
Click to expand...
Click to collapse
What application doesn't start?
The CAB can only be installed if you turn certification off.
I don't know if this is possible with all stock ROMs.
Sascha
SaBo said:
What application doesn't start?
The CAB can only be installed if you turn certification off.
I don't know if this is possible with all stock ROMs.
Sascha
Click to expand...
Click to collapse
The FMRadio.exe does not start. The cab was installed properly without issue.
mffu said:
That type of program writes everything into the registry during the installation.
Click to expand...
Click to collapse
Yes, I know that - it was the point of my post.
But what I asked is: "Are there any other Registry entries that need updating ?"
The answer seems to be - apparently not, since another post reported it as working by just copying the unzipped files into \Windows ... but other posts reported this as not working.
Generating a CAB is easy of course, making sure it actually works may be harder.
E.Bonobox said:
this is the default version that i have on my HTC Polaris/Cruise.
Click to expand...
Click to collapse
The FM Radio I posted is better than the PDAViet's one. I have less interference or static after I upgraded to it. I am on PDAViets's 06 build and I get a clear and crisp signal off the stations I had the crappy static with the original build.
And YES, you got to have the security policies changed in order to overwrite some files in the Windows directory. Search for the SDA Application unlocker. That should fix the problem with upgrading.
In my first post I mentioned about backing up the original files. If you happened to fail doing so, try to find Dutty's FM Radio cab.
Thank you!
Related
Hi,
Is there any way to unlock the extended ROM for the JAM without Hard Reset ?
Thanks,,,
alkandery75 said:
Hi,
Is there any way to unlock the extended ROM for the JAM without Hard Reset ?
Thanks,,,
Click to expand...
Click to collapse
On my even HR cat will not solve a problem
To read only launch LoadVDisk.exe
zgan said:
To read only launch LoadVDisk.exe
Click to expand...
Click to collapse
Can you please attache your file here cause it seems it has been deleted from mine by the XML file....
Thank,,,
alkandery75 said:
zgan said:
To read only launch LoadVDisk.exe
Click to expand...
Click to collapse
Can you please attache your file here cause it seems it has been deleted from mine by the XML file....
Thank,,,
Click to expand...
Click to collapse
I tried running the file in the JAM and soft reset it but it is not working.. Is there any special procedure ?
alkandery75 said:
I tried running the file in the JAM and soft reset it but it is not working.. Is there any special procedure ?
Click to expand...
Click to collapse
I running the file in the T-M Compact and all working. Need improve registry.
I found something...
VDisk.dll is the driver for the extended ROM. If you look inside it is the standard CpqDsk.dll (Compaq driver from 3800) It still contains it strings.
All we need now is a user with a Compaq 3800 which looks in his registry what the parameters for CpqDsk.dll are...
either something like from here:
HKLM\Drivers\BuildIn\CpqDsk
or here:
HKLM\Storage\Profiles\CpqDsk
John
I Can put EXT ROM content on FTP
I saved it on PC
alkandery75 said:
I tried running the file in the JAM and soft reset it but it is not working.. Is there any special procedure ?
Click to expand...
Click to collapse
No need to soft reset. Just run loadvdisk.exe. If you want to always show ext rom after every soft-reset, put a link to loadvdisk.exe into \Windows\StartUp folder.
It worked for me on my JAM, however it is Read Only.
Anybody have an idea how to make it "full access" ?
Paul
ROM == Read Only Memory
(Although in this case it is not really "read only" as you can definitely rewrite it when installing OS upgrades...)
i appreciate your excurse in computer definitions :-> however, based on my previous experience with it - it can be edited. in the original i-mate it was not a problem at all.
LoadVdisk.exe is a hiden file under \Windows, how to run it?
Use Resco Explorer to open hidden files.
Many thanks.
I'm trying to unhide the extended rom but am not succesfull. I'm using the 1.11 rom. I've tried the loadvdisk, but that didnt work, any suggestions?
thanks in advance
Registry
Not yet found any solution... folder is available, but impossible to write anything on it.
I've this entry in my registry (Qtek S100 ROM 1.11fr)
[HKEY_LOCAL_MACHINE\Drivers\VDisk]
"Key"="Drivers\\VDisk"
"WindowBase"=dword:a2c00000
"Size"=dword:01300000
"Folder"="Extended_ROM"
"DisableInt"=dword:00000000
"OnBoard"=dword:00000001
"Dll"="VDISK.DLL"
"Index"=dword:00000008
"Prefix"="DSK"
"Profile"="VDisk"
"IClass"=hex(7):7b,00,41,00,34,00,45,00,37,00,45,00,44,00,44,00,41,00,2d,00,45,00,35,00,37,\
00,35,00,2d,00,34,00,32,00,35,00,32,00,2d,00,39,00,44,00,36,00,42,00,2d,00,\
34,00,31,00,39,00,35,00,44,00,34,00,38,00,42,00,42,00,38,00,36,00,35,00,7d,\
00,00,00,7b,00,41,00,33,00,32,00,39,00,34,00,32,00,42,00,37,00,2d,00,39,00,\
32,00,30,00,43,00,2d,00,34,00,38,00,36,00,62,00,2d,00,42,00,30,00,45,00,36,\
00,2d,00,39,00,32,00,41,00,37,00,30,00,32,00,41,00,39,00,39,00,42,00,33,00,\
35,00,7d,00,00,00,00,00
Click to expand...
Click to collapse
Hi,
Can someone point me to a simple Extended ROM Unlock tutorial because I just can't manage to find my way through the Forum.
I'de like to place my favorite apps in ROM...
Thanx
The General
GeneralPatton said:
Hi,
Can someone point me to a simple Extended ROM Unlock tutorial because I just can't manage to find my way through the Forum.
I'de like to place my favorite apps in ROM...
Thanx
The General
Click to expand...
Click to collapse
well general, depends on the OS you are using..
if you have rom version 1.6.x.x it won't work easy yet.
the pre 1.6.x.x roms are quite simple, download totalcommander for ppc, install it, run it, in the adress-bar type "\extended_rom\" without the " " 's, and voila, there they are..
good luck..
ps.
the search button on top of this page would give the oppertunity to search for words as extended rom in de wizard forums.. :wink:
Ok
Thanx works fine with TC
Just a last question, all cabs i place in extended_rom will install automatically after hard reset ?
'cause I saw i had a autorun.exe file in there and some sutomization cabs that install after Hardreset ???
Thanks
The General
Re: Ok
GeneralPatton said:
Thanx works fine with TC
Just a last question, all cabs i place in extended_rom will install automatically after hard reset ?
'cause I saw i had a autorun.exe file in there and some sutomization cabs that install after Hardreset ???
Thanks
The General
Click to expand...
Click to collapse
There's a config file in there too (can't remember it's name off hand, but it's fairly obvious). This has a list of the cab files to install after a hard reset. I guess you'd need to add your cab files to that list as well as copying them to extended ROM.
Dox
Re: Ok
GeneralPatton said:
Thanx works fine with TC
Just a last question, all cabs i place in extended_rom will install automatically after hard reset ?
'cause I saw i had a autorun.exe file in there and some sutomization cabs that install after Hardreset ???
Thanks
The General
Click to expand...
Click to collapse
depends, some have a config.txt file, if you open this one and edit it to your
needs, the files you put into it will be installed after hard reset, if you
set the right parameters from the txt file.
other roms have the autorun.exe wich installs all the files in the extrom.
i'm not sure anymore if this is right, but i believe that if you rename your
cab's like this:
applicationX.cab -> Default_applicationX.cab
it will install without any problems.
if you have problems with unsigned cabs, you can use the signed.patch
wich can be found on the ftp.
On my Cingular 8125 the extended ROM is write protected, does anyone know how do I remove the write-protection?
jsnipper said:
On my Cingular 8125 the extended ROM is write protected, does anyone know how do I remove the write-protection?
Click to expand...
Click to collapse
Only way around is to flash an older rom into your handset..
Re: Ok
nmx77 said:
GeneralPatton said:
Thanx works fine with TC
Just a last question, all cabs i place in extended_rom will install automatically after hard reset ?
'cause I saw i had a autorun.exe file in there and some sutomization cabs that install after Hardreset ???
Thanks
The General
Click to expand...
Click to collapse
depends, some have a config.txt file, if you open this one and edit it to your
needs, the files you put into it will be installed after hard reset, if you
set the right parameters from the txt file.
other roms have the autorun.exe wich installs all the files in the extrom.
i'm not sure anymore if this is right, but i believe that if you rename your
cab's like this:
applicationX.cab -> Default_applicationX.cab
it will install without any problems.
if you have problems with unsigned cabs, you can use the signed.patch
wich can be found on the ftp.
Click to expand...
Click to collapse
Hi
Could tell us where on the ftp we can found signed.patch?
Bye
Herc. 8)
Here it is
i couldn't find it on the ftp anymore as well..
i'll put it there again, but here it is for you
if it's that easy to get into extended rom, then why do people release the unlockers for extrom? i don't get it.
Ray_jai said:
if it's that easy to get into extended rom, then why do people release the unlockers for extrom? i don't get it.
Click to expand...
Click to collapse
you can access the files on the extended rom, but you can't edit any of the information there. you have to flash a new extended rom image for any changes to take effect. I think those that are looking at the extended rom unlockers is for a different purpose. I think I read somewhere that it let some people use the extended rom space as extra storage (~10 megs), but it messed up applications on the phone, especially the camera.
in general, it doesn't seem to be a good idea to unlock the extended rom. most rom builders look like they are trying to learn how to edit this properly to add it o their rom kitchens.
can one's extended rom go curropt?
after i heard about this, i went into extended rom just to see if it works.
and it did. i exited total commander and started to gather my anti theif program to get installed.
now I go back into extended rom, and everything became gibberish!
and when i click on something it says "error 3 Changing to dir!"
WTF is going on!
can someone help me out?
Hello to everybody! I have a question: Is where any BT Manager for Qtek S200?
Did you try the one I posted? Seems to work on WM2003 and WM5. Don't know about Prophet, but give it a go
V
No! it is not working
It may be the different hardware. But which version did you try? Some people were having troubles with the .cab, but the .zip seemed ok.
Is it installing? Did you launch it twice?
V
I took it on the other site, cause I haven't found it on yours...sorry...
please, tell me the link to zip)
http://forum.xda-developers.com/viewtopic.php?p=269989#269989
V
extracting zip files faild( why?
unsupported encription algoritm
vijay555 said:
It may be the different hardware. But which version did you try? Some people were having troubles with the .cab, but the .zip seemed ok.
Is it installing? Did you launch it twice?
V
Click to expand...
Click to collapse
Isn't it Mio's bluetooth manager?
Yes... That's stated in the thread - I certainly want no credit for it (well, other then ripping it! )
V
any ideas? using WinRar Pocket ...
xxguess
I d/l to my desktop unzipped and manually copied the 3 files to a directory. Works great
yes, but what does it actually do, and, does it take extra resource from the device in non-bluetooth mode?
tjohnso1
It appears just to be an interface for discovering/pairing devices, only runs when you activate it, then closes when you are done.
updated
thanks poof.
and here its is
remove the the zip extencion before installation
install and rebbot reboot.
to configure go to
start/settings system/
enjoy
regards faria
cool, we're just talking about this at TreoCentral.
Unfortunately, it doesn't seem to do jack on the Treo 700wx regardless of the settings I chose. I soft-reset the device and even installed/uninstalled.
hmph.
tried it on my apache, I get the app. but it doesnt appear to close anything.... may I ask what device this is coming off of?
~mike
did not close app on my universal
poussin69 said:
did not close app on my universal
Click to expand...
Click to collapse
Yes...me too on aku3.2 beta..
any clue...?
didnt work on my jasjam either
same thing with my TnTY (fr rom)
people try again it has been updated
may I ask what ROM did this come out of?? also the updated one is working great! also what was the task manager program then? I see the app has been renamed and the icon is different..
Thx,
Mike
yesss....congrats runs very well thanx
Lvballer06 said:
may I ask what ROM did this come out of?? also the updated one is working great! also what was the task manager program then? I see the app has been renamed and the icon is different..
Thx,
Mike
Click to expand...
Click to collapse
mine come from a prophet rom. it worked fine in the wizard,the updated one i have updated the cab with some missing files from poof cab.
see the pictures same version diferent icon
faria said:
mine come from a prophet rom. it worked fine in the wizard,the updated one i have updated the cab with some missing files from poof cab.
see the pictures same version diferent icon
Click to expand...
Click to collapse
thanks I was just wondering.
~Mike
When running the cab it gives me;
Failed to install aria htc x.cab
This is on Prophet (Qtek S200) Anyone else seen this error?
kind regards
marl
Edit, downloaded again, works fine now, thx for the cab
Any ideas if this is possible to be mapped to a hard button.....like the ok button on the 750v?
Thanks
I have tried three times on my TyTn but every time the cab file fails to install. I downloaded the zip file, renamed it and put in in my SD card. When installing I got the message Cound not install etc.
Any help available?
I'd suggest you to have a look to the device and try to find out if there is no left files from the former installation.
I've struggled time ago with such Resco things. Maybe it's the same issue.
It's only for Pocket PC PE, or it be useful for WM 5.0 Smartphone Edition?
I have a Qtek 8310. ¿Can I use this taskmanager?
Thanks
Well finally done,
Do not expect equaliser and FM to work, I have not got the bacground files for them.
That bloody Exrom.img new format is hardnut to crack.
It is My-Systems diskonchip format.
Hope somebody helps me to get it working.
get the mediapluso2 second version from AtomLife hereby attached
hxxp://rapidshare.com/files/34379910/MediaPlusO2.rar
(This is the version 2 from Atom Life WM6 ROM, for WM5 Mediaplus Version 1 please tell me if required and if this not work)
i installed but it says skins are corrupt, cant seem to find an uninstaller with it either to tidy back up again
Carnivor said:
i installed but it says skins are corrupt, cant seem to find an uninstaller with it either to tidy back up again
Click to expand...
Click to collapse
I tested it on my EtenM700 with WM6, and the WM6 Professional Emulator on Laptop.It worked fine on them both.
Check whether a directory has been created with the name
_QHiddenPartition in the root of the device.
else this cannot work.
I just created this with WinCE Cab manager, install/uninstall options I will try to figure out.
_QHiddenPartition was created, and i could look at the bitmaps fine
Carnivor said:
_QHiddenPartition was created, and i could look at the bitmaps fine
Click to expand...
Click to collapse
sSorry, i should have told u, its from Atom wm6 rom, hence v2 will not work on WM5
Did you manage to get FM to work already?