Database Users

VGA Aku2.zip in Universal\Tools on Server

I tried to find here what it is.., can't find it.
Anyone who can tell me??
Thanks Rene

Looking at them, I assume it's the resource files for using Real VGA mode.
Put them in /Windows and you should be able to use ozVGA to switch to 96dpi.
However, they don't work for me anymore! Since upgrading to the latest QTek ROM, I haven't been able to run my JJ in Real VGA mode. Not sure why, but there are loads of missing/incorrect icons. I'm probably doing something wrong though, 'cause I haven't seen anyone else complaining yet....

It´s the dlls used for OZVGA and the cab that overrides the security functions. Somebody prepared that zip for use with AKU2.

sub69 said:
However, they don't work for me anymore! Since upgrading to the latest QTek ROM, I haven't been able to run my JJ in Real VGA mode. Not sure why, but there are loads of missing/incorrect icons. I'm probably doing something wrong though, 'cause I haven't seen anyone else complaining yet....
Click to expand...
Click to collapse
I had this problem with the older VgaRes.zip file and Qtek rom, but this one works for me. What I did was:
1. unpack the contents
2. run sdkcerts.cab
3. copy dlls and other files to /Windows
4. run sdkcerts.cab one more time
5. Use ozVGA to change mode
and it works now. Hope this helps.

voodoo_nostromo said:
I had this problem with the older VgaRes.zip file and Qtek rom, but this one works for me. What I did was:
1. unpack the contents
2. run sdkcerts.cab
3. copy dlls and other files to /Windows
4. run sdkcerts.cab one more time
5. Use ozVGA to change mode
and it works now. Hope this helps.
Click to expand...
Click to collapse
Thanks, I'll give it a go. Haven't really had time to do anything geeky recently, but I have a whole evening free today, and I'm going to spend it organising my 'electronic life'!

I just changed to the new QTEK ROM. No problem with VGA. I just put everything back as it was before (run SDKcerts, copy files, fix system apps, install VJBigphone) and everything was fine.

This VGA works only on universal or can be ported to other devices as well?

Guys, thank you..:lol:
I'm gonna try this out.
Grtz Rene

could somebody put a link to the files please.

ftp://xda:[email protected]/Universal/Tools_Programs/VGA_AKU2.zip

HTC X TASKMANAGER HERE by faria

updated
thanks poof.
and here its is
remove the the zip extencion before installation
install and rebbot reboot.
to configure go to
start/settings system/
enjoy
regards faria

cool, we're just talking about this at TreoCentral.
Unfortunately, it doesn't seem to do jack on the Treo 700wx regardless of the settings I chose. I soft-reset the device and even installed/uninstalled.
hmph.

tried it on my apache, I get the app. but it doesnt appear to close anything.... may I ask what device this is coming off of?
~mike

did not close app on my universal

poussin69 said:
did not close app on my universal
Click to expand...
Click to collapse
Yes...me too on aku3.2 beta..
any clue...?

didnt work on my jasjam either

same thing with my TnTY (fr rom)

people try again it has been updated

may I ask what ROM did this come out of?? also the updated one is working great! also what was the task manager program then? I see the app has been renamed and the icon is different..
Thx,
Mike

yesss....congrats runs very well thanx

Lvballer06 said:
may I ask what ROM did this come out of?? also the updated one is working great! also what was the task manager program then? I see the app has been renamed and the icon is different..
Thx,
Mike
Click to expand...
Click to collapse
mine come from a prophet rom. it worked fine in the wizard,the updated one i have updated the cab with some missing files from poof cab.
see the pictures same version diferent icon

faria said:
mine come from a prophet rom. it worked fine in the wizard,the updated one i have updated the cab with some missing files from poof cab.
see the pictures same version diferent icon
Click to expand...
Click to collapse
thanks I was just wondering.
~Mike

When running the cab it gives me;
Failed to install aria htc x.cab
This is on Prophet (Qtek S200) Anyone else seen this error?
kind regards
marl
Edit, downloaded again, works fine now, thx for the cab

Any ideas if this is possible to be mapped to a hard button.....like the ok button on the 750v?
Thanks

I have tried three times on my TyTn but every time the cab file fails to install. I downloaded the zip file, renamed it and put in in my SD card. When installing I got the message Cound not install etc.
Any help available?

I'd suggest you to have a look to the device and try to find out if there is no left files from the former installation.
I've struggled time ago with such Resco things. Maybe it's the same issue.

It's only for Pocket PC PE, or it be useful for WM 5.0 Smartphone Edition?
I have a Qtek 8310. ¿Can I use this taskmanager?
Thanks

MediaPlusO2 from AtomLife (Only for WM6 PDA'S)

Well finally done,
Do not expect equaliser and FM to work, I have not got the bacground files for them.
That bloody Exrom.img new format is hardnut to crack.
It is My-Systems diskonchip format.
Hope somebody helps me to get it working.
get the mediapluso2 second version from AtomLife hereby attached
hxxp://rapidshare.com/files/34379910/MediaPlusO2.rar
(This is the version 2 from Atom Life WM6 ROM, for WM5 Mediaplus Version 1 please tell me if required and if this not work)

i installed but it says skins are corrupt, cant seem to find an uninstaller with it either to tidy back up again

Carnivor said:
i installed but it says skins are corrupt, cant seem to find an uninstaller with it either to tidy back up again
Click to expand...
Click to collapse
I tested it on my EtenM700 with WM6, and the WM6 Professional Emulator on Laptop.It worked fine on them both.
Check whether a directory has been created with the name
_QHiddenPartition in the root of the device.
else this cannot work.
I just created this with WinCE Cab manager, install/uninstall options I will try to figure out.

_QHiddenPartition was created, and i could look at the bitmaps fine

Carnivor said:
_QHiddenPartition was created, and i could look at the bitmaps fine
Click to expand...
Click to collapse
sSorry, i should have told u, its from Atom wm6 rom, hence v2 will not work on WM5

Did you manage to get FM to work already?

Improve FM Radio Library Build 103.816

I think this FM Radio is improved as far as reception concerned. Less interference noticed overall. Back up the current library (just in case you don't like this one) from the Windows directory and replace it with the files in the zip.

Where does it come from ?

plopplop said:
Where does it come from ?
Click to expand...
Click to collapse
From udk's latest ROM

Is there a possibilitie to change the fm radio with a working wm6.1 rom already flashed because when i try to copy the files over the files on my device i get a error that i cant override them.

Ajacied410 said:
Is there a possibilitie to change the fm radio with a working wm6.1 rom already flashed because when i try to copy the files over the files on my device i get a error that i cant override them.
Click to expand...
Click to collapse
use total commander or resco explorer. Either will over-write the libraries.
It would be great to make a cab file out of it. Could anybody help with it?

mffu said:
use total commander or resco explorer. Either will over-write the libraries.
It would be great to make a cab file out of it. Could anybody help with it?
Click to expand...
Click to collapse
That depends - what are all the needed Registry entries ? It's simple enough to have all the files in the zip CAB'd to install in \Windows, but are there Registry entries needed beyond these ?

i tried it yesterday.Copy all files in Windows folder with resco,check version and see version number is ok.I listened to radio all night and havent a problem

ianl8888 said:
That depends - what are all the needed Registry entries ? It's simple enough to have all the files in the zip CAB'd to install in \Windows, but are there Registry entries needed beyond these ?
Click to expand...
Click to collapse
This library is complete. You can unzip it to the storage card, tap on the FM Radio.exe and it will work. I believe we need a cab maker. That type of program writes everything into the registry during the installation.

Thanks. I will try this one tonight ... ;-)

mffu said:
I believe we need a cab maker.
Click to expand...
Click to collapse
Here you go.
Tested. Works.
Sascha

The PDAViet rom also has version 1211.721 which also has better reception than the one on the stock rom. Now I can use my favourite headset which had poor reception, maybe due to shorter length than some crappy one I had

SaBo said:
Here you go.
Tested. Works.
Sascha
Click to expand...
Click to collapse
Doesn't work on my Cruise. Stock ROM. The App doesn't want to start.

Neither the cab not the zip works. I thought that my sprite backup would have the original Files from the rom,it does not. Does anyone have the stock radio files to get my radio working again?
TIA!
EDIT: It looks like I have lost the ability to launch the radio app. At this point, I really don't want to do a hard reset. Don't apply this update unless you are willing to lose this function.

victoradjei said:
The PDAViet rom also has version 1211.721 which also has better reception than the one on the stock rom. Now I can use my favourite headset which had poor reception, maybe due to shorter length than some crappy one I had
Click to expand...
Click to collapse
this is the default version that i have on my HTC Polaris/Cruise.

I'd like to backup my files before copying the new one but can't copy fms_api.dll, even using Resco explorer...

Doesn't work on my Cruise. Raramomo ROM. The App doesn't want to start.
Has somebody a cab of the original radio ?

LIPA said:
Doesn't work on my Cruise. Raramomo ROM. The App doesn't want to start.
Click to expand...
Click to collapse
What application doesn't start?
The CAB can only be installed if you turn certification off.
I don't know if this is possible with all stock ROMs.
Sascha

SaBo said:
What application doesn't start?
The CAB can only be installed if you turn certification off.
I don't know if this is possible with all stock ROMs.
Sascha
Click to expand...
Click to collapse
The FMRadio.exe does not start. The cab was installed properly without issue.

mffu said:
That type of program writes everything into the registry during the installation.
Click to expand...
Click to collapse
Yes, I know that - it was the point of my post.
But what I asked is: "Are there any other Registry entries that need updating ?"
The answer seems to be - apparently not, since another post reported it as working by just copying the unzipped files into \Windows ... but other posts reported this as not working.
Generating a CAB is easy of course, making sure it actually works may be harder.

E.Bonobox said:
this is the default version that i have on my HTC Polaris/Cruise.
Click to expand...
Click to collapse
The FM Radio I posted is better than the PDAViet's one. I have less interference or static after I upgraded to it. I am on PDAViets's 06 build and I get a clear and crisp signal off the stations I had the crappy static with the original build.
And YES, you got to have the security policies changed in order to overwrite some files in the Windows directory. Search for the SDA Application unlocker. That should fix the problem with upgrading.
In my first post I mentioned about backing up the original files. If you happened to fail doing so, try to find Dutty's FM Radio cab.
Thank you!

Apps Installation

Helo everyone. I'm new to the forum and to Windows Mobile. I hope this question is in the correct place....don't want to get bashed on my first post. I have searched for about an hour now for the answer to my question but I can't find anything that relates to my problem. I am trying to install a converter..."Pocket Converter 1.50" on my TMobil USA HTC HD2. After downloading the cab file into a folder...a screen pops up that says "installation of Pocket Converter 1.50 was unsuccessful". OK...I then tryed one called "MSS Converter 1.08. Same thing happened with it too. I have successfully installed other apps so I was wondering what might be the problem.

I have had the same issue a couple of times. I think sometimes the download gets corrupted. I just redownload and usually the app will install.

Thanks for replying......I've downloaded these 2 apps numerous times and on different days but still no luck. Do you think I could download them to my computer then copy them over to the phone and install?

That may be a good idea, other than that maybe try and download from another source. I think also some apps have issues with the hd2.

signman, do you have links to the exact cabs you tried, so I can test them on mine?
What kind of converter program are those? If they're for converting units of measurement, I use the uConvert app which works great on the HD2, and was developed by an xda member...I've attached the cab here for you to try if that's what you're looking for.

i used to have this happen to me all the time when i downloaded the cab directly from my hd2. Try using a pc to download it then transfer via usb and install. Hope it works!

jfmckenna said:
i used to have this happen to me all the time when i downloaded the cab directly from my hd2. Try using a pc to download it then transfer via usb and install. Hope it works!
Click to expand...
Click to collapse
I have it happen alot with opera on the phone, but when I goto the same link with IE it works fine .... I guess IE still has its uses..

sirphunkee said:
signman, do you have links to the exact cabs you tried, so I can test them on mine?
What kind of converter program are those? If they're for converting units of measurement, I use the uConvert app which works great on the HD2, and was developed by an xda member...I've attached the cab here for you to try if that's what you're looking for.
Click to expand...
Click to collapse
Sorry for taking so long to post back...as I couldn't find my post!
The links to the apps I am trying to download are as follows...
Well since I'm a new user....I can't post the links..I got them from freewarepocketpc.net
I finally got the MSS Converter downloaded and installed from another website. Can't remember where I got it. I'm going to try to get your posted cab directly to my phone and try that one. Well that didn't work. Installation says it was unsuccessful. Maybe I have to do it like jfmckenna has suggested. Thanks for helping me out guys...I really appreciate it.

Signman1123 said:
Sorry for taking so long to post back...as I couldn't find my post!
The links to the apps I am trying to download are as follows...
Well since I'm a new user....I can't post the links..I got them from freewarepocketpc.net
I finally got the MSS Converter downloaded and installed from another website. Can't remember where I got it. I'm going to try to get your posted cab directly to my phone and try that one. Well that didn't work. Installation says it was unsuccessful. Maybe I have to do it like jfmckenna has suggested. Thanks for helping me out guys...I really appreciate it.
Click to expand...
Click to collapse
If all these installs are failing, I'm guessing you're either missing the NetCF 3.5, or the sdkcerts cab, both are attached below. These are necessary to run many of the apps/cabs you'll find here and at other sites like freewarepocketpc.net. Just put the cabs on your SD card (I recommend just putting all the ones you install in a folder there for easy reference later), and run each one, then you'll probably be able to install the stuff that was giving you issues.

cab files
I've downloaded the cab files you posted but the NetCFv35 says I have to first remove the older version. How do I remove the older version? I know nothing about Windows Mobil...sorry.

sirphunkee said:
If all these installs are failing, I'm guessing you're either missing the NetCF 3.5, or the sdkcerts cab, both are attached below. These are necessary to run many of the apps/cabs you'll find here and at other sites like freewarepocketpc.net. Just put the cabs on your SD card (I recommend just putting all the ones you install in a folder there for easy reference later), and run each one, then you'll probably be able to install the stuff that was giving you issues.
Click to expand...
Click to collapse
I thought HD2 did have NetCF 3.5 preinstalled
I got a Telstra Hd2
do i need to install these to cabs
Thank you

Signman1123 said:
I've downloaded the cab files you posted but the NetCFv35 says I have to first remove the older version. How do I remove the older version? I know nothing about Windows Mobil...sorry.
Click to expand...
Click to collapse
ilordvader said:
I thought HD2 did have NetCF 3.5 preinstalled
I got a Telstra Hd2
do i need to install these to cabs
Thank you
Click to expand...
Click to collapse
Right...I forgot that it was already loaded on the stock ROM, you can skip that signman.
m'lord, I would suggest installing the sdkcerts...it will probably be necessary for you at some point if you're installing any homebuilt apps. I suspect that most custom ROM's would have it built in.

sirphunkee said:
Right...I forgot that it was already loaded on the stock ROM, you can skip that signman.
m'lord, I would suggest installing the sdkcerts...it will probably be necessary for you at some point if you're installing any homebuilt apps. I suspect that most custom ROM's would have it built in.
Click to expand...
Click to collapse
Humm...if it is the same version I already have on the phone...wonder why it is telling me to remove the older version first. Where can I look to see what version I have on the phone?

sirphunkee said:
Right...I forgot that it was already loaded on the stock ROM, you can skip that signman.
m'lord, I would suggest installing the sdkcerts...it will probably be necessary for you at some point if you're installing any homebuilt apps. I suspect that most custom ROM's would have it built in.
Click to expand...
Click to collapse
where can i get the sdkcerts cab for hd2
please

cab file
Check post #9 above.

Flash Lite
Sirphunkee. I managed to get your uConvert installed but it is trying to install Flash Lite. That install does not work...I get a "error installing Flash Lite". Is there anything else I can do? I downloaded Flash Lite to my computer and copied it to my phone. Still won't work.

I used a Flash Lite cab file posted on the forum for my fix. Thanks everybody for your help.

Signman1123 said:
I used a Flash Lite cab file posted on the forum for my fix. Thanks everybody for your help.
Click to expand...
Click to collapse
Ok good, I'm glad you got it working (I'd forgotten it wants flash light installed to get it to work). Does uConvert cover everything you need then?