How to liberate htc shift.HELP!!!!!!!! - Shift General

Hallo,
I'm tatanni an italian student, I have htc shift, but I have a great problem to liberate snap vue.
I tried to share the file to liberate my htc shift, but when I open the unblock zip file by winrar, there is showed a file:000CAb164.001 - 000Cab165.001- file setup and file liberate000 that I can't read.
Thanks

The file it's not supposed to open. Follow modaco's procedure in this link
http://www.modaco.com/content/forum/266537/View-Topic/
it has a video for you to see if you can't understand the procedure.

motowiz said:
The file it's not supposed to open. Follow modaco's procedure in this link
http://www.modaco.com/content/forum/266537/View-Topic/
it has a video for you to see if you can't understand the procedure.
Click to expand...
Click to collapse
Thank you motowiz,
now I'm another problem, when I open the file cab and ink by my mail, it appear the folowing message"Impossible to open this allegate in Messags. It could be not safe".
How I can do?
Which is the problem?
Thanks

tatanni said:
Thank you motowiz,
now I'm another problem, when I open the file cab and ink by my mail, it appear the folowing message"Impossible to open this allegate in Messags. It could be not safe".
How I can do?
Which is the problem?
Thanks
Click to expand...
Click to collapse
You have to configure the e-mail in SnapVue side, it only works there. Did you follow the movie steps, all of them???
If yes, you are not told to open any files, only to save them...
Please watch the film very carfully and follow each step, if you need pause the film between procedures. It helps if you follow the film in a diffrent computer.

motowiz said:
You have to configure the e-mail in SnapVue side, it only works there. Did you follow the movie steps, all of them???
If yes, you are not told to open any files, only to save them...
Please watch the film very carfully and follow each step, if you need pause the film between procedures. It helps if you follow the film in a diffrent computer.
Click to expand...
Click to collapse
The email is configured, and I follow the movie steps by another pc, but I can't click on the file ink and cab to save them, because it show "impossible to open this allegate in messags, it could be not safe".
Ciao e Thanks

tatanni said:
The email is configured, and I follow the movie steps by another pc, but I can't click on the file ink and cab to save them, because it show "impossible to open this allegate in messags, it could be not safe".
Ciao e Thanks
Click to expand...
Click to collapse
show us a photo of the shift at this step.

cmonex said:
show us a photo of the shift at this step.
Click to expand...
Click to collapse
These are the photos.
Thanks

tatanni said:
These are the photos.
Thanks
Click to expand...
Click to collapse
Hi tatanni
You need to hold your stylus on that attachment for a while, it opens a dialog box to save it. If you click on it, WinMo will try to open it. Good Luck.
Thanks
Ram

saiweb said:
Hi tatanni
You need to hold your stylus on that attachment for a while, it opens a dialog box to save it. If you click on it, WinMo will try to open it. Good Luck.
Thanks
Ram
Click to expand...
Click to collapse
Thanks a lot Saiweb,
now I have a wm6 free,
without you and cmonex I think that it should been impossible to liberate my htc shift.
Thank you.
Ciao from Italy

files where are they
Well I know I am well behind the times with this, but a friend gave me his HTC Shift a while ago. I would like to liberate it however the site suggested here no longer hosts the files for me to do this. does anyone know where i can download these files so I can email them to the shift?
thanks in advance
Scot....

found them
All, found the files i need to email to my device in another thread. Should have done more digging before I posted.... oh well

Where did YOU find the LIBERATE FILES ?? I could not find them either, only the other files which are not working

can anyone post mirror links to the liberate files. It has been 2 days searching the Internet without any success. the email form and links on the official site are not working please if anyone has the files share a link or email them to me at either mshauny at gmail dot com or Shauny at cutdeV dot Co dot cc. Thanks In advance

Try to copy and paste this link in your browser. - http://www.pocketpc.ch/attachments/...ws-mobile-freischalten-shiftpackliberatefiles
(add .zip at the very end of the link).
*Right click the link, copy it. Then paste it in your browser and add .zip*

liberate files
saiweb said:
Hi tatanni
You need to hold your stylus on that attachment for a while, it opens a dialog box to save it. If you click on it, WinMo will try to open it. Good Luck.
Thanks
Ram
Click to expand...
Click to collapse
hey bro im from trinidad , i just bought a htc shift x9500 . i wanted to liberate my shift, the links are dead on the sites by chance u have a copy to spare, thanks in advance my email is
[email protected]

RAYBIC101 said:
hey bro im from trinidad , i just bought a htc shift x9500 . i wanted to liberate my shift, the links are dead on the sites by chance u have a copy to spare, thanks in advance my email is
[email protected]
Click to expand...
Click to collapse
to Liberate your HTC Shift, look at http://www.modaco.com/topic/266537-liberate-your-htc-shift/page__st__180

Hakim Rahman said:
to Liberate your HTC Shift, look at http://www.modaco.com/topic/266537-liberate-your-htc-shift/page__st__180
Click to expand...
Click to collapse
Got another problem:
if i send the files as attachment via aol,
only the .link one is shown in SnapVue.
If i take a look at the same mail in vista,
Liberate is also there.
Why this?
late edit: took another provider (web.de) and both files appeared...

Related

imate Pool

Greetings,
I have just got imate jasjam and with it i got pool game which is really nice you can play on wifi or internet.
So how can i transfer it to my wizard, i just try to send the pool.exe to my phone, and i got a message saying not signed with the trusted cetificate.
Any body know how to handle it.
If you want ill upload the file here.
Thanks.
Could you ipload the file? I'll take a look... (and others too, probably..)
Uploaded
Greeings,
Yes sure here it is
Ok, you need two more files for this to work (provided it is not locked to the specific device):
tranport.dll
gx.dll
These should be in the windows directory or in the game folder.
thanks
Greetings,
Where can i find these
You really need to read the replies you get more carefully:
These should be in the windows directory or in the game folder.
Click to expand...
Click to collapse
Opps
Greetings,
Oh im sorry
Thanks.

NOT WORKING: Liberate your shift!

Hello,
the procedures for liberating the shift does not work anymore on new editions of the shift:
When trying to run the application "liberate!" after doing the "trick" copying of the link, the message: "This application is not signed and is not allowed to run".
Futhermore when trying to run the registry application, the same message is shown: "This application is not signed and is not allowed to run".
Furthermore the application "USB Tool" cannot run because of the same above message.
We have tried to find out how to disable the signature checking algorithm, however we have not found a solution yet.
The shift is the current newest version of HTC Shift.
What to do then?
Regards,
Atommax
WHAT!
Are they outlawing and blocking our liberation attempts?!!
Geez, are they realy that uptight?
This sucks!
sorry misread your post atommax
martincyborg... yep I followed the procedure with doing the "insert picture" and saving the attachments in the my documents/settings folder... afterwards ctrl +x and ctrl + v the folder back to the /windows folder.
the icon for liberate came into the settings window, but when pressing it it said "application not signed, ... not allowed to run" ...
however we found out that if you do not copy the settings folder back to the windows folder, then when selecting settings in the snapvue today screen, the programs window comes up and you can e.g. select file explorer... however you cannot run the liberate app nor registry app cause not signed.. :-(
can somebody make a signed app of the liberate thing?
i get it. did you pm paul at modaco?
Try to insert this Disable Security.CAB into \Settings
together with the Liberty.cab
Run this cab first before running the Liberty.cab.
Hope this can work for your new Shfit!
oh f*ck htc. first the ATT unflashable radio, now this.
but of course we will investigate this more closely. can someone with this new shift version PM me? thank you.
Have you tried unlocking it via remote registry?
If it's not possible, you can always flash an old signed rom which does not have the protection.
cmonex said:
can someone with this new shift version PM me? thank
you.
Click to expand...
Click to collapse
Hi.
If you've had no PM's, my shift will be arriving tomorrow so will be willing to help as I want to liberate it!
PDAMerlin
PDAMerlin said:
Hi.
If you've had no PM's, my shift will be arriving tomorrow so will be willing to help as I want to liberate it!
PDAMerlin
Click to expand...
Click to collapse
nope no PM's yet... I wonder if original poster just did something wrong
but anyway if your shift is similarly locked, then do PM me, I want to see how the issue can be solved (as you can see from pof's post, we have several ideas)
I have just tried liberating by brand new Shift - works perfectly first time - no errors and everything installs.
PDAMerlin
PDAMerlin said:
I have just tried liberating by brand new Shift - works perfectly first time - no errors and everything installs.
PDAMerlin
Click to expand...
Click to collapse
thanks for the information. I wonder if you got lucky or just CDMA shifts get locked

Question about HTC HD2

Hey u guys/girls,hope u have a good day so far
k so i downloaded like 1 or 2 HD2 Games and when i open it to play, it says tht i need a newer version of the Microsoft® .NET Compact Framework...so.. can anyone help me with this?
Thxs in advance
Have you tried Google yet?
Hockey_Rulez11 said:
Hey u guys/girls,hope u have a good day so far
k so i downloaded like 1 or 2 HD2 Games and when i open it to play, it says tht i need a newer version of the Microsoft® .NET Compact Framework...so.. can anyone help me with this?
Thxs in advance
Click to expand...
Click to collapse
Download it from here:
Code:
http://microsoft-net-compact-framework.en.softonic.com/pocketpc
Or get the .cab from MoDaCo, for a 2MB download, instead of a 33MB download.
http://www.modaco.com/index.php?act=attach&type=post&id=23810
(Does require registration)
nljuggler ; oooh yea, how could i forgotten tht? ofc i tried google.(not tryin to b mean) **ur 2nd comment** - naw no thxs
fitnessvip ; yea i tried this but i wasn't SURE how to activate it on the HD2. How i did it was save the file onto the destop then connect the HD2 to the computer then open up the Phone memory (NOT THE "STORAGE CARD") then just copy and paste the Framework into tht place.so then i thought i was done so then i disconnect it then press the start button and going to "File Explorer" and activate it from there but it doesn't work
Hockey_Rulez11 said:
nljuggler ; oooh yea, how could i forgotten tht? ofc i tried google.(not tryin to b mean) **ur 2nd comment** - naw no thxs
Click to expand...
Click to collapse
Well that's how I found the result in my second post. If you should decide to download it anyway. Copy the .cab file anywhere on your phone (or storage card). Find it with the File Explorer on your phone and click it.
It will start the installation. I'm not even sure it's going to ask you where you wish to install it, but do select 'Device' if appropriate.
nljuggler said:
Well that's how I found the result in my second post. If you should decide to download it anyway. Copy the .cab file anywhere on your phone (or storage card). Find it with the File Explorer on your phone and click it.
It will start the installation. I'm not even sure it's going to ask you where you wish to install it, but do select 'Device' if appropriate.
Click to expand...
Click to collapse
k thxs man
nljuggler said:
Well that's how I found the result in my second post. If you should decide to download it anyway. Copy the .cab file anywhere on your phone (or storage card). Find it with the File Explorer on your phone and click it.
It will start the installation. I'm not even sure it's going to ask you where you wish to install it, but do select 'Device' if appropriate.
Click to expand...
Click to collapse
OH YEA i forgot after downloading it,can i delete the .cab file? or do i have to keep it there?
well after downloading the .cab file and installing it,i opened up the download HD2 game and it was an Error...
Yes, you can delete .cab files after installing them. Too bad the game gave you an error. What was the exact error?
nljuggler said:
Yes, you can delete .cab files after installing them. Too bad the game gave you an error. What was the exact error?
Click to expand...
Click to collapse
I got this error after installing:
MissingMethodException
Cant find PInvoke-DLLen HTCAPI
i Sensors.HTCNavsensor..ctor (form form=
Hey, a new actor enters the scene. Welcome [email protected]@!
A quick search on Google shows that your not the only one with this problem. Haven't found out what caused it yet.
But when do you get this error, as it would be very coincidental if you are referring to the same game as Hockey_Rulez11. Because he never mentioned the nam of the game.
nljuggler said:
Hey, a new actor enters the scene. Welcome [email protected]@!
A quick search on Google shows that your not the only one with this problem. Haven't found out what caused it yet.
But when do you get this error, as it would be very coincidental if you are referring to the same game as Hockey_Rulez11. Because he never mentioned the nam of the game.
Click to expand...
Click to collapse
I got the error after installing diamonCubes and Lightsaber.
I have also innstalled netcfv35, but have not done anything with this file after installing it.
In remove programs the program name is: Microsoft .net CF 3.5 so I think everything is ok, but if there is any thing you have to to after the installation I have not done that.
I new to HD2 and pocket PC.

Any kind Norwegians here?

I flashed my HD2 the other day and forgot to backup my dictionary.
I installed an English rom and it is a big hustle to manualy input every single world.
is anyone kind enough to copy their Norwegian dictionary and send it to me?
it is three files located in My Device;
\Windows\eT9Cdb.Cdb
\Windows\eT9Rudb.Rdb
\Windows\eT9AsDb.Adb
I could help but need advice how to copy them. Find them on the phone but when connected through PC and Explorer, the Windows folder does not show up...
Johan
Uncheck Hide System files (or something like that) in explorer's View settings. Now the Windows folder will show up.
thank you so much!
You'll have to check the option show all files like Dracoster said,
and mark those 3 files and copy them to you'r memory card, then you can plug you device to you'r computer
I now have copied the three files to my storage card and see them there when checking the phone.
When connected to the PC and using explorer from there however, I only see the eT9Cdb-file. The two other files on the card dont show up, although the phone-explorer confirm they are there. I also have ticked the Show hiden files and folders...??
Any further advice?
Take a look here,
http://forum.xda-developers.com/showthread.php?t=610549
Hei Tunai - tks for input that did not help me much - at least I did not see the solution to my problem looking for some "hidden" fields.
If you Audin PM me your phone or so - you could maybe direct me as to how to "see" the files and then send them to you..
Johan
jsw44 said:
Hei Tunai - tks for input that did not help me much - at least I did not see the solution to my problem looking for some "hidden" fields.
If you Audin PM me your phone or so - you could maybe direct me as to how to "see" the files and then send them to you..
Johan
Click to expand...
Click to collapse
I have the WWE -ROM installed on my Leo, and I've just followed the steps in link above and got Norwegian XT9 without any issues.
Thats good!
This was way above my skill level anyway..
Tunay said:
Take a look here,
http://forum.xda-developers.com/showthread.php?t=610549
Click to expand...
Click to collapse
Thanks. but I have alredy tried that out.. didnt work. when i press xt9 it wont write any letters..
jsw44 said:
Hei Tunai - tks for input that did not help me much - at least I did not see the solution to my problem looking for some "hidden" fields.
If you Audin PM me your phone or so - you could maybe direct me as to how to "see" the files and then send them to you..
Johan
Click to expand...
Click to collapse
I have sendt you an pm
audin said:
Thanks. but I have alredy tried that out.. didnt work. when i press xt9 it wont write any letters..
Click to expand...
Click to collapse
This worked out for me. Did you do a Soft-Reset?
yes, did a soft reset, but nothing worked. have tried it 3 times.
audin said:
I flashed my HD2 the other day and forgot to backup my dictionary.
I installed an English rom and it is a big hustle to manualy input every single world.
is anyone kind enough to copy their Norwegian dictionary and send it to me?
it is three files located in My Device;
\Windows\eT9Cdb.Cdb
\Windows\eT9Rudb.Rdb
\Windows\eT9AsDb.Adb
Click to expand...
Click to collapse
please? anyone?

DVP Mango EM App

I finally got my hands on the 1.12 Engineering Mode application and have decompiled it (see attached (decompiled - not working really))
And Guess what?
I Found the File Browser !!!!!
When you go to the RD Test -> About page enter in FB or 983 and BAM! File Browser!
It is limited (can only read text files), slow and hard to use but hey it's a file browser!
Incase you were wondering, here is the URL to the package:
http://download.windowsupdate.com/m..._c13ae38ec4ab63aeb46ee1f7bbee3ab878390112.cab
Also attached is the EM app itself if you wanted just that.
Other info
There are 188 different menus in this application!!
I hope you're successful!
This are indeed great news.
You're contribution to the DVP is great.
MJCS said:
I just got my hands finally on the 1.12 Engineering Mode application. I am decompiling it now. Cheers!
OMG I FOUND THE FILEBROWSER!!!!!!!
*#301# - already known
Taiwan changes langauge zh-TW
China changes langauge zh-CN
USA changes langauge en-US
FB or 983 /others/fb/FileBrowser.xaml", UriKind.Relative)
Click to expand...
Click to collapse
even i'm curious on how you did that since interop doesn't work
unless the server method still works...
domineus said:
even i'm curious on how you did that since interop doesn't work
unless the server method still works...
Click to expand...
Click to collapse
I found the URL where the mango cab was from Microsoft's windows update. From there I just extracted the cabs and the xaps.
that's pretty smart
may want to get in touch with notebookgrail since he performed a similar inquiry with em.xap
MJCS said:
I finally got my hands on the 1.12 Engineering Mode application and have decompiled it (see attached (decompiled - not working really))
And Guess what?
I Found the File Browser !!!!!
When you go to the RD Test -> About page enter in FB or 983 and BAM! File Browser!
It is limited (can only read text files), slow and hard to use but hey it's a file browser!
Incase you were wondering, here is the URL to the package:
http://download.windowsupdate.com/m..._c13ae38ec4ab63aeb46ee1f7bbee3ab878390112.cab
Also attached is the EM app itself if you wanted just that.
Other info
There are 188 different menus in this application!!
Click to expand...
Click to collapse
you keep making progress and you are gonna need a donate button my friend. Thank You, keep working!!
Great work man, keep going hoping that we can support you as much as we can
raiderfan247365 said:
you keep making progress and you are gonna need a donate button my friend. Thank You, keep working!!
Click to expand...
Click to collapse
Donation button added to the left
since we have the main dvp cab I am wondering if there is a way to modify the packages...I'll shoot a pm to xboxmod asap
I already did. Lets not flood his inbox
MJCS said:
I already did. Lets not flood his inbox
Click to expand...
Click to collapse
In the meantime I'll see what's needed he and yuki had a big thread in the hacking area about cab installing...
domineus said:
In the meantime I'll see what's needed he and yuki had a big thread in the hacking area about cab installing...
Click to expand...
Click to collapse
I already read and tried it. The problem is there isnt a custome boot loader available for the DVP and you need the cab.pks files to be signed by microsoft.
FWIW - the File browser in DVP is a plain old binary/stream reader. All it does is just reads each byte by byte and is programmed to parse for folder and file. Hence, it's useful to read text file. It can also read any file for that matter (bascailly like opening a dll or anyfile with notepad) - as long as you have patience starring at the dark screen .
FYI - this filebrowser is there since 1.10FW.
This app is really useful if you know the exact path of the file you want to read. All u do is write a short code and make a dev app that will take input of a the path and just spit the contents of it. (i had one a while back, will dig and see if it works in Mango). Again you will get tombstoned by the MS security.
I'm in EM and click RD Test. I have a textbox. How do I get to the file browser? I entered 983 in there and nothing happened.
EDIT: Nevermind, you type in *#6336#
I need some help from a DVP AT&T user with mango and all that Jazz installed.
Download the Windows Phone Device Manager from http://www.touchxperience.com/ and install it. Connect your DVP wait 30 seconds and then run the WP Device Manager as administrator. It will take a few seconds to a minute and download and install the touch explorer applicaiton. It should now conect to the application and show an image of the DVP on the desktop. If not turn off wifi, click "PC Connection" once (it will fail), hit cancel at the prompt and then turn WiFi back on. If you are connected to your home router we can connect over wifi to your desktop. Click on PC conneciton again and this time it might ask you for your computer's IP. Enter that and it should connect. Without closing the app now or letting the screen turn off go into WPDM and click on the File Explorer. Click on Windows and then find the EM.xap file. Attach it to a post here so I can see if the AT&T version is any different than the T-Mobile version. I doubt it is but who knows.
Here you go, from an unlocked AT&T device. Doubt it's any different.
Darn it looks the same. I was hoping for something new to exploit.

Categories

Resources