Related
I need your advice...
My Touch Screen doesn't function, I cannot dial out, Faulty LCD or Touch Screen (or both), While I click on the screen it doesn’t respond or it has a shift, I click on the top of the screen and it actual click on the middle of the screen.
I have no problem with the display - it display everything and correctly with full color.
What I think is that I have a problem with my touch screen.
Did anyone had a problem with the touch screen and replace it?
What is strange, when I hrad reset the device, on screen alignment process I have no problem to click on the cross, but it takes the device up to 3-4 times to aligen the device.
I want to order the touch screen part and replace it, I don't have warranty.
Do I need to replace the LCD as well or just the touch screen? Either way it will be cheaper to buy them both then to send it to repair.
when the backlight is off...and you hold the phone 20 cm for your eye`s and turn a bit up and down in a room with light...can you see a oil film on the screen...???
that is the digitizer....sorry german english..
[email protected] said:
when the backlight is off...and you hold the phone 20 cm for your eye`s and turn a bit up and down in a room with light...can you see a oil film on the screen...???
that is the digitizer....sorry german english..
Click to expand...
Click to collapse
First - thanks for your time and for your help.
Well I don't understand what do you mean by saying, "can you see a oil film"
When the backlight is off (black screen - the device is on stand by) - I can see only black screen and my reflection...
Sorry...my english...So look in that thread and you understand what i mean...
http://forum.xda-developers.com/showthread.php?t=475294
i have it send in repair because of warrenty...but on ebay...you can buy for 30 €
when the problem is that...but i dont know...i hope that is helpful
I don't have this oil or bubbles on my screen...
Hardware...Connector(cable)....Software(Rom).....did you flash it..??
Sorry i don`t know...
I hope you find it
I can eliminate the software, I try to flash it with several roms and radios, include the origanl HTC shipped rom.
Well I ordered the LCD+Touch screen, waiting for this parts and then I will see.
Thanks for your help
i have similar problem but my screen is decentered just few milimerts
i sent it to waranty check twice but it came back that no problems apear
when i center display it its ok but max for 1 day or even less
so im currious if changing LCD will help ...
kobein said:
so im currious if changing LCD will help ...
Click to expand...
Click to collapse
I will let you when I will replace the Touch Screen with or without the LCD.
This should help........did this a few months ago, all working fine with no problems.
Check this out....
http://forum.xda-developers.com/showthread.php?t=392301&highlight=digitizer
ProvRobbie said:
This should help........did this a few months ago, all working fine with no problems.
Check this out....
http://forum.xda-developers.com/showthread.php?t=392301&highlight=digitizer
Click to expand...
Click to collapse
I ordered from the same store "keep_beauty", and they already shipped it, I looked in your recommendation and his guide.
Hey guys, I have been so much frustrated about my htc topaz....till now it is working perfectly. Since yesterday all of a sudden touch screen stops working...with ballooning effect on screen ...previously ballooning effect was noticed before 3-4 days,but i did not pay attention on it as touch screen working at that time..
What may be the probable cause is it digitizer or lcd screen gone?
I have uploaded the pictures also..
That's the Chinese Diamond2?
If so I have the same problem with a Chinese phone... There is a part of the screen that's not working fine (like a balloon on the left side of the screen). I have to press really hard and press more to the side than it should be
I've already considered in opening the phone to try to solve the problem.
Does anyone already opened his phone with success? Any pictures available to help the task?
indresh88, sorry to use your topic but I think we both need the same...
I had the same problem, is very usual in this phone. the tecnical changed the screen.
luisitron said:
I had the same problem, is very usual in this phone. the tecnical changed the screen.
Click to expand...
Click to collapse
The problem is that my phone came from China... So I would have to send it there, and that's not an option...
rvrosa said:
That's the Chinese Diamond2?
If so I have the same problem with a Chinese phone... There is a part of the screen that's not working fine (like a balloon on the left side of the screen). I have to press really hard and press more to the side than it should be
I've already considered in opening the phone to try to solve the problem.
Does anyone already opened his phone with success? Any pictures available to help the task?
indresh88, sorry to use your topic but I think we both need the same...
Click to expand...
Click to collapse
no definately not...it's factory unlocked asian version...also it is t5353 and official stock rom.
by the way how can we differentiate between chinese and factory unlock phone?
have you solve your problem?
Hi, use some standard scotch tape or tesa film. Stick it over the affected area and peel the tape off. This should unstick the digitizer again, it did the job for me quite often...
Cheers
badari said:
Hi, use some standard scotch tape or tesa film. Stick it over the affected area and peel the tape off. This should unstick the digitizer again, it did the job for me quite often...
Cheers
Click to expand...
Click to collapse
Please explain that better? I only have to stick some scotch tape on the screen and peel it off?? I have a screen protector, so it's better to take it?
Thanks
indresh88 said:
no definately not...it's factory unlocked asian version...also it is t5353 and official stock rom.
by the way how can we differentiate between chinese and factory unlock phone?
have you solve your problem?
Click to expand...
Click to collapse
I have the T5388i dual sim.
I'm no expert on those phones, but I think an easy way to know if the phone is HTC or Chinese version is the front camera side (on HTC is on the right and on the replica is on the left)
Other simple way is if it's dual sim than it's not from HTC.
If I'm telling some mistakes please someone correct me.
Concerning the problem... it's not solved
rvrosa said:
I have the T5388i dual sim.
I'm no expert on those phones, but I think an easy way to know if the phone is HTC or Chinese version is the front camera side (on HTC is on the right and on the replica is on the left)
Other simple way is if it's dual sim than it's not from HTC.
If I'm telling some mistakes please someone correct me.
Concerning the problem... it's not solved
Click to expand...
Click to collapse
Well according to my research...If you have standard htc phone, you have device name t5353,no dual sim,htc written on left side and front camera on right side....
badari said:
Hi, use some standard scotch tape or tesa film. Stick it over the affected area and peel the tape off. This should unstick the digitizer again, it did the job for me quite often...
Cheers
Click to expand...
Click to collapse
it helped me quite good and temporery, but how to fix it permanently...?
replace the touch screen digitizer.
eBay have many of them...
I have replaced my cracked one last month.
Two fixes for the scotch tape issue
1. Always take along some scotch tape or
2. Replace the digitizer. This can be done faily easily, see some other posts.
Cheers
I've looked at ebay for the digitizer and I've found many... the question is if they work on my phone?
I have a DUAL SIM T5388i, can anyone point me the right digitizer?
I've tried the tape but didn't worked I don't know if I'm doing it right because I've noticed no diference.
Help me!
I also have this problem, It just stopped working. I was calling, 10 minutes later when i took my phone and tried to unlock it, it did nothing, when i connect my phone in windows 7 with mobile center, I installed SOTI pocket controller, to check if it was my screen, and it was because via pocketcontroller it worked good, but how do i have to replace the screen thing, and how does it work with the tape,,
Thanks
i also had the same problem. if im not mistaken it might be due to humidity ...
i might be wrong
is there any way to fix this without replacing digitizer.
by the way i have a TD2 t5353 htc original .
Workign Solution Till Now
Hello Friends,
I have TD2 mobile and today I had same issue. I was thinking it was because of the weather or some.
I remember it did happend several time before, but when I restart the device several time it does work. So I was ignoring.... But today it did not work.. looks like going toward end... So I did soft and hard reset without and that did not helped me.
So I switched off the mobile, "heated" the touch screen gently with my hand for 1 min and started the mobile again and it worked for me .
Not sure if this is a solution, but will work.
May be I will contact Service Center here in Hyderbad and see what is wrong here?
Hope this will help you all...
Thanks.
Well, I've solved the problem... changed the digitizer...
rvrosa said:
Well, I've solved the problem... changed the digitizer...
Click to expand...
Click to collapse
How much that costs you?
prabhat said:
How much that costs you?
Click to expand...
Click to collapse
Take a look at solonomi. That's the place I've bought it.
digitizer for t5388i
Hi, I want to buy digitizer for t5388i, but I didn't find it. I searched at solonomi, ebay, alibaba... Have you any ideas where to buy? Digitizer for t5388i is not same with other t5388 models. Here is picture:
imageshack.us/photo/my-images/263/digitizer2.jpg/
(sorry for incomplete link, but I don't have permision to add images or links)
Many thanks.
i see a few have encounter this problem but yet to find a solution.
Problem: Everytime i make a call or receive a call the screen goes black and only the buttons work but it still useless without any display on screen. I have already tried turning off the auto bright but still doesnt work.
This happen in every android i use but phone doesn't act up when i am using winmo.
I have the same problem, please help !!!!
yascorpion said:
I have the same problem, please help !!!!
Click to expand...
Click to collapse
well the answer is simple because the proximity sensor doesn't work properly
and you have to either change your build or i don't know figure something out
for me the proximity sensor works
and i am using nexus one build
Thank you,I will try your build
yascorpion said:
Thank you,I will try your build
Click to expand...
Click to collapse
Please share with us the result, because I have also tried several builds, and it does not work properly on any. Mostly with Desire HD builds which I'd like to use and it is frustrating. Thanks.
I tried more than 7 builds but it didn't work,I spent like 5 hours to fix it but nothing worked and it's really frustrating. cauz I can't know who call me sometimes and see how many minutes I spent. please share if you have any results.
thank you very much !!!!
yascorpion said:
I tried more than 7 builds but it didn't work,I spent like 5 hours to fix it but nothing worked and it's really frustrating. cauz I can't know who call me sometimes and see how many minutes I spent. please share if you have any results.
thank you very much !!!!
Click to expand...
Click to collapse
the issue is less sensitivity with the proximity sensor. Three reasons which I saw:
1) mechanical reason for less sensitive sensor could be screen protector which is covering left top side of the device. Remove protector from this area where you see two dots.
2) dust between sensor and screen. Blow some air between screen and plastic cover of the device. Perhaps with vacuum-cleaner.
3) this is not your problem apparently, but generally European type HD2 is less sensitive on light according the YouTube video I saw, comparing with TMOUSE device. On the other hand current kernels are the same for both devices. In this matter, put your device during call under the direct light and you will see.
Screeb lite +Android assistant +Brightness Auto off did the trick for me .
Try it ,it might work with your device ....
Hello all, I hope this post can help you with the same or similar problem I had.
My LG gt540 started having a problem 2 months ago, the touchscreen got offset by 2 centimetres(1 inch) verticaly down, this was very annoying specially texting and couldnt access the top panel. Ex: to unlock the phone I had to press 1 inch above the green button.
Sometimes(I dont know why) it went back to normal, but about a week since the problem started it just got permanent, I tried rebooting, taking the battery, etc, nothing worked... Even tried to go to the calibration option but the offset was to much so it said out of range...
Then I read something online about the heat caused touchscreen problems, so I was thinking... hardware dont really like heat, and I always carry my phone on my pocket, the body heat could be damaging the touchscreen, lets try cold, it could solve it, long shot but what do I have to lose?
Left my phone in the freezer for 10 minutes, turned on, and it worked! for 1 month now its back to normal!
Hope it helps you, but try first freezing it powerd off, may be safer.
i have got my phone 2,5 years and i havent got any insue with the touch screen
Hi
My phone started doing the exact same thing a week ago...
This is the only thing I haven't tried, lets see if it works for me....
Thanks
I've had screen calibration problems since i started flashing custom roms.
In my case the screen positions are slightly off at the right side of the screen. When I want to type an "p" i have to touch where the "o" is on a german keyboard.
I'm trying your solution right now.
mseebass said:
I've had screen calibration problems since i started flashing custom roms.
In my case the screen positions are slightly off at the right side of the screen. When I want to type an "p" i have to touch where the "o" is on a german keyboard.
I'm trying your solution right now.
Click to expand...
Click to collapse
I have problems for the outer 4 sides.
It's worth to try.
Didn't work for me, it was only fine for 5 minutes....
Also didn't work for me.
Besides, after puting it in the freezer the display protection foil now looks a bit strange.
mseebass said:
I've had screen calibration problems since i started flashing custom roms.
In my case the screen positions are slightly off at the right side of the screen. When I want to type an "p" i have to touch where the "o" is on a german keyboard.
I'm trying your solution right now.
Click to expand...
Click to collapse
I vave thar problem too, but I didn't find any solution...
Varrasco said:
Hi
My phone started doing the exact same thing a week ago...
This is the only thing I haven't tried, lets see if it works for me....
Thanks
Click to expand...
Click to collapse
hope you fixed it
Hi, sorry for waking this thread up.
I also have the same problem, press 'o' to get 'p'.
I want to ask you guys who already tried this method. Did it work?
It's tempting, but it might be better to know more info.
Thanks.
Hi all,
Im at a loss here, I dont know how to move forward with this problem so im asking for help lol XD.
I just gave my nexus 4 to my gf ( just got my opo last week). The phone was running cyanogen mod 11 ( some nightly version between m6 and m7).
So when my phone came in the mail, I dropped her sim in my nexus 4 (witch was working perfectly) and after making a phone call with it, she tells me she thinks the phone app is broken or something...
So I have a look at it and this is what its doing now. When I call someone, as soon as you click call the screen goes black. To bring back the screen you need to click twice on the sleep/wake button on the side ( kinda like if you were closing the phone and re-opening it) just for the screen to show again but none of the buttons work. Well none of the phone app buttons work, I can still click back/home/previous app buttons or slide down the top menu just fine. just cant click any of the number keys, hang up, hit speaker phone or anything related to the phone app. So in order to hang up I have to click home and then use the drop down menu and click hang up under the phone notification.
Before droping her sim card in the phone I did a standard wipe/factory reset on the phone just to give her a clean platform. So since that was already done I've tried updating to a stable ( M9 in this case) release, problem is still there, so I tried to wipe dalvik, cache and done a data wipe/factory reset from the CWM recovery and flashed a fresh cm 11 M9 with gapps and I still have the problem.
Im at a loss at where to begin looking for a fix for this situation, I've looked on the xda and cm forums and ran plenty of google searches for this problem but im coming up empty ...
any help would be greatly appreciated,
regards
Chris
Edit: omg screen protector was interfering with the proximity sensor... Is this a common problem with nexus 4 or could this provblem still be related to my hardware/software ?
(I've never used a screen protector before).
R3druMz said:
Edit: omg screen protector was interfering with the proximity sensor... Is this a common problem with nexus 4 or could this provblem still be related to my hardware/software ?
(I've never used a screen protector before).
Click to expand...
Click to collapse
If the screen protector isn't applied carefully, it might interfere easily with the sensors. If you want to check, then download a sensor tester from the play store, and use it to see if the sensor is working without any protector over it.
abaaaabbbb63 said:
If the screen protector isn't applied carefully, it might interfere easily with the sensors. If you want to check, then download a sensor tester from the play store, and use it to see if the sensor is working without any protector over it.
Click to expand...
Click to collapse
haha thanks for your reply, I've been trying to solve this issue for a week, been looking on the cm nightly and stable forums and here on xda trough all the posts that sounded closely related to my problem and didn't find anything... as soon as I post a questions 3 minutes later I found the problem.
To test it, I simply peeled the screen protector off and held it there while I made a call and it worked perfectly !! Then I cut out the part that goes over the prox sensor and its perfect again ( looks like crap but works ). Still gonna download that sensor tester ( curiosity XD).
P.S: totally unrelated to this post, I've been reading some of your "how to" posts here on xda, just wanted to say thanks for all the info you have put out there XD.
R3druMz said:
P.S: totally unrelated to this post, I've been reading some of your "how to" posts here on xda, just wanted to say thanks for all the info you have put out there XD.
Click to expand...
Click to collapse
Hehe No problem
This happened with my co-worker's Nexus 4 (which is now my Nexus 4). She had been complaining about this for like a month, until I actually saw her screen, and that the corner of her screen protector had flapped loose and had a bunch of crud built up underneath it. It was a forehead smacker for me when I realized how obvious the cause/solution was. Not so obvious when I took possession and replaced the screen and had the same problem.