Related
Hello, I bought a second hand prophet. But I have a problem with the screen : the screen does not respond exactly where I put the pen. For exemple, on the keyboard, if I put the pen on the "E" key, it is the "D" wich is pressed ...
This only happen in the middle of the screen. No problems on the top or the bottom of it.
Of course I tried to re-calibrate the screen many times but it does not solve the problem.
Does anyone know where does this problem come from ?
Thanks a lot !
hello
do the screen alignement , it helped for me
grtzzz
you can find this in settings___system ___ screen and choose align
Like I said, I already did the re-alignement. But it didn't solve my problem.
touchscreen problem
hello,
u can try to update the rom , maybe that could be a solution , you find it in the wiki of the prophet on how to do it
grtzzz
grey
dizzy33 said:
Hello, I bought a second hand prophet. But I have a problem with the screen : the screen does not respond exactly where I put the pen. For exemple, on the keyboard, if I put the pen on the "E" key, it is the "D" wich is pressed ...
This only happen in the middle of the screen. No problems on the top or the bottom of it.
Of course I tried to re-calibrate the screen many times but it does not solve the problem.
Does anyone know where does this problem come from ?
Thanks a lot !
Click to expand...
Click to collapse
Well it is very likely that your touchscreen is damaged but not your LCD. There is actually 2 portions to the screen which most ppl assume there was only one(well I did initially until finding out later when my screen broke and got it replaced). Anyway, if you've tried re-calibrating it and doesn't work..maybe your screen protector (if you do use one) maybe be at fault? Other than that, worse case scenario, it is your touchscreen that is physically damaged. FYI it is not really expensive to replace compared to the LCD part.
Speak to njbridges if you need to get it replaced.
http://forum.xda-developers.com/showthread.php?t=323981
I already upgraded the ROM to latest french version ... It didn't help in that.
Anyway, thanks a lot for your answers !
I had the same problem. Unfortunately it was a problem with the touch screen which was fixed under warranty.
the simply answer is
try to change ur screen protector, or just remove and re-put it on again
just try...
beer2nd said:
the simply answer is
try to change ur screen protector, or just remove and re-put it on again
just try...
Click to expand...
Click to collapse
Hello.
I tried to do that, because I had problems to align screen.
I changed the touchscreen with another from a broken LCD. But now all I can get is a white screen, then a sound (like the starting sound when you make a hard reset or remove batery) and after black screen again.
What can I do to bring it back.
I've noticed that the touchscreen had some white glue where is the connection with the LCD. Do I need to replace that glue, maybe is a special glue with small voltage conductibility ? Or ? Help!
Anyone changed the touchscreen ?
PS: I think I will start a new post, maybe I will get some answers!
i haved thar problem... like you.... i just bought an ney TOUCH SCREEN new... and it was solved.... ATENTION only the touchscreen... not the lcd!
P4k1t0 said:
i haved thar problem... like you.... i just bought an ney TOUCH SCREEN new... and it was solved.... ATENTION only the touchscreen... not the lcd!
Click to expand...
Click to collapse
When you buy a new touch screen you buy with some conectors or only the plastic rectangle ?
saxxen said:
When you buy a new touch screen you buy with some conectors or only the plastic rectangle ?
Click to expand...
Click to collapse
well... i have to cut with a scissors the conecters to conect right on lcd screen... and it worked
P4k1t0 said:
well... i have to cut with a scissors the conecters to conect right on lcd screen... and it worked
Click to expand...
Click to collapse
When you say cut it means that a part of the conectors still remain on the touchscreen (under the touchscreen). Or no conectors at all on the touchscreen and that means you removed the connectors (pulled out).
Do you know if I have any chance to take another touchscreen from a defect device and work ?
The warranty for my HD is gone and I would probably need to change the touch screen digitizer myself, found these on ebay for ~60€, but does anyone know how to change them? Again, any help would be appreciated!
Originally:
HTC Touch HD, it has been a wonderful phone until now. I have encountered a wierd problem with the touchscreen.
First the touchscreen stopped working completely, after awhile it suddenly started working, at first it recognized some bits and pieces but now it recognizes every touch as normal, except..
It is very inaccurate and the "sum of inaccurity" seems to change depending on where I push the screen, the screen alignment option in settings does not fix this.
I recorded two videos to show this problem better:
http://www.youtube.com/watch?v=Xd1vjiHr2QU
http://www.youtube.com/watch?v=TynTTFIQJv8
Any help would be appreciated on how to fix this!
looks broken id return under warrenty did it get any knocks / drops? do you have insurance?~
spzero said:
looks broken id return under warrenty did it get any knocks / drops? do you have insurance?~
Click to expand...
Click to collapse
I have handled it with great care so no big knocks or drops. Ill contact the store about the warranty. Just wondered if theres a way how to simply fix this.
Just noticed, the screen works normally sometimes for one touch, then it goes back to the inaccurate **** :/
Im now guessing that some cable could be loose or something like that?
Have u tried recalibrating the screen? I can't remember exactly where I found it, but its in programs or settings somewhere.
Viba said:
...the screen alignment option in settings does not fix this...
Click to expand...
Click to collapse
Yes I have..
Anyway I RMA'd it now. Hope I get a new one
I can tell you from previous experience, HTC does NOT warranty touch screens. You mentioned "a store", so I hope they help you, because HTC will not. >sigh<
Seems a little unfair if they don't seeing as the HD is purely touch screen!
SomethingWicked said:
I can tell you from previous experience, HTC does NOT warranty touch screens. You mentioned "a store", so I hope they help you, because HTC will not. >sigh<
Click to expand...
Click to collapse
Hmmh, well the store probably sends it to some service center here in Finland that fixes HTC phones.
Indeed sounds very stupid if the warranty doesnt cover the touchscreen.
Perhaps my HD suffered from something else than a broken touchscreen, eg. mainboard or a chip that controls the touch screen. Who knows I'm just hoping it "passes" the warranty :|
Well... Had Hard-SPL on my touch hd and duttys 1.7 rom, so the warranty is gone
Didn't know they were so picky about it, they said it would cost 605€ to repair the screen. So now I should probably start looking for a screen digitizer on ebay and some help on how to change it... Already downloaded the service manual, but there was nothing on how to change the digitizer, could anyone here show me some light to this? Thanks.
I have dismantle my HD to see if there's any way to change only the screen (it's broken)
There's no way, as far as I saw. You have to replace LCD, tourch screen and screen. It's one piece and there's no way easy way to open it without break it.
You can find all of them for about 200E.
drabisan said:
I have dismantle my HD to see if there's any way to change only the screen (it's broken)
There's no way, as far as I saw. You have to replace LCD, tourch screen and screen. It's one piece and there's no way easy way to open it without break it.
You can find all of them for about 200E.
Click to expand...
Click to collapse
So there's no way I could replace only this?
http://global.ebay.com/Original_Digitizer_Touch_Screen_For_HTC_Touch_HD/310124432320/item
Another sad story // hopefully with a good ending
I kinda have the same problem as Viba and others. Sorry for the looong post. But decided to describe in more details my experience up to now, and hope you can help as well.
All of a sudden, I started having problems with the touch screen of the Touch HD. I started noticing that whenever I touched the Touchflo buttons, the phone vibrated. Soon I came to realize the if I touched in some spot, the phone recognized that I was touching lower, to the point that it could not recognize touches in the taskbar, for instance.
The united has 2 or 3 months max. It had some falls before and I do not really know who (or which one) was the culprit.
Tried this as fix: re-alignment, hardresets, Official ROM upgrade. Then I started reading and understanding that the problem was probably the digitizer ("nice to meet you").
I live in Brazil and the Touch HD is not expected be released here any time soon. So the few HTC service centers do not know how to fix it and do not have parts for it. And also, I bought mine from an auction site by some user who bought it abroad, with no warranty whatsoever. I am left alone in this.
I was very frustrated and eager to get my device running again. So I started looking for a new digitizer and also the tools to open my phone. The digitizer (just the digitizer, not the LCD screen) I ordered from an ebay shop in Hong Kong on Monday and is expected to still arrive sometime in this century (IF Brazilian port authorities do not mess up). The tools arrived yesterday.
I downloaded the service manual and said to myself, let's see if the digitizer problem is maybe due to a loose flat cable. Got to work and carefully disassembled the device as per the service manual. (I have to say that, although I try to be carefull, I always scratch, bend or mess something up when I do jobs like these. So I was afraid of cracking some plastic or worse and actually did some.)
Up to where the service manual show, it went incredibly very well. But that's the problem. The service manual guides you to disassemble the unit up to the point where you are with the bezel, LCD and digitizer in one piece.
But hey! I saw zillions of internet shops selling the bezel (actually, the hole housing, but with no LCD), the digitizer or other parts separately! What is going on?
So I started trying to unmount the bezel, LCD and digitizer. Tried several things. It got really late. I was impactient. So I tried splitting the digitizer from the LCD, by inserting a hard plastic aluminium tip between the digitizer and the housing. A very thin plastic kind of tape came out (at lest part of it). So I tried doing it more. No success. And then I put a very thin screwdriver between then (just enough to get an ulgy bent it the plastic housing).
When I had played enough with that puzzle, I gave up and began mounting everything back. The good part is that I was able to get everything back and the phone is working. Well, except for the digitizer.
First thing I did was to kidnap the wife's Nokia E71 I bought her last month and she is not using yet (she couldn't learn to use yet; well, she hasn't even tried it), because I have to have mobile access to my emails.
And I really started now to consider other alternatives. Will some user like me EVER be able to change just the digitizer? Is it even possible? If it is, I would like to give it at least another shot.
But I am also afraid that it could be another part which is in failure. I just don't want to spend more $$$$ in this. It would be better to buy another phone (and maybe not a complete touchscreen - gosh, I miss my Tytn II). I so regret being a gadget freak and not waiting a release in my country.
Shoud I send my phone abroad for a service center repair? My sister lives in Dubai and she may be able to help.
Should I give up my unit and seel the used parts in ebay?
Hope to hear your suggestions. Thanks anyway.
Viba said:
Well... Had Hard-SPL on my touch hd and duttys 1.7 rom, so the warranty is gone
Didn't know they were so picky about it, they said it would cost 605€ to repair the screen. So now I should probably start looking for a screen digitizer on ebay and some help on how to change it... Already downloaded the service manual, but there was nothing on how to change the digitizer, could anyone here show me some light to this? Thanks.
Click to expand...
Click to collapse
before doing this what about removing hspl and reflashing back a stock rom
change shop and you might, and i say MIGHT, be lucky
much better than screwing up the machine
Rafael K said:
I kinda have the same problem as Viba and others. Sorry for the looong post. But decided to describe in more details my experience up to now, and hope you can help as well...
Click to expand...
Click to collapse
Nice to know I'm not alone with this problem
Sucks that the digitizer couldn't be removed separately, would help alot if someone knew how to do this, if even possible..
crashDebug said:
before doing this what about removing hspl and reflashing back a stock rom
change shop and you might, and i say MIGHT, be lucky
much better than screwing up the machine
Click to expand...
Click to collapse
I have already tried with 3 custom roms and 2 original SPL:s with two original roms.
The Finnish law allows me to get my HD replaced if I could prove that the custom rom didn't brake the digitizer. Already sent some emails to the local repairstation for HTC phones here in Finland, lets see...
I run a repair center (US). I have not gotten curious enough to take mine apart, but if someone has a dead one to experiment with, PM me.
Broken digitizer glass
I have the same problem with the digitizer glass being broken. I have had the back off the phone and stripped it back as far as I dare, but the service manual just doesn't tell you how to replace the digitizer and glass only. Checked out youtube where there are many videos with instructions on how to replace the screens and digitizers on lots of different phones as well as the iphone, just nothing on the Blackstone yet.
Any one else found a solution or decent instructions?
Today I disassembled my HD too, found a loose screen wire but nothing else. Even when I attached it properly the screen didn't work.
Has anyone found out how to change the digitizer?
some info
Hello,
I am also have HTC Touch HD, and I am also thinking about replacement of touch screen and housing because of scratches. Here instruction in Russian
http://www.pdacenter.ru/razborka/htc-touch-hd/
step 24 is not shown on the picture, but there is mentioned that in order to replace screen you should push it forward from back side of the screen; also mentioned that screen is fixed with double sided tape (probably it is fixed to the touch screen)
Also, did you try to use any polish to remove minor scratches on the touch screen? HTC Touch HS has resistive screen and probably may be polished (in contrast to capacitive touch screen that has some coating).
All the best
Also, about this problem see
http://forum.xda-developers.com/showthread.php?p=3911326
You guys should be smarter! If you want to warranty exchange it, flash the normal SPL again and flash a stock rom!
Hi.
My Diamond 2 has stopped working with touch screen commands.
Problem:
The upper layer of touch screen somehow separated from some part inside, and phone doesn't react to touch commands.
It's same as you take for example transparent label and stick it to some glass and in some places you see bubbles, but it's much bigger area.
Solution:
Phone going to service.
Anyone had same problem with your phone ?
Image attached.
Joker2206 said:
Hi.
My Diamond 2 has stopped working with touch screen commands.
Problem:
The upper layer of touch screen somehow separated from some part inside, and phone doesn't react to touch commands.
It's same as you take for example transparent label and stick it to some glass and in some places you see bubbles, but it's much bigger area.
Solution:
Phone going to service.
Anyone had same problem with your phone ?
Image attached.
Click to expand...
Click to collapse
..like michael jackson song: You are not alone...http://forum.xda-developers.com/showthread.php?t=522813&highlight=broken
Digitiser...
You can get a brand new housing and digitiser from eBay for £24.99... I've just ordered one for mine. Unfortunately, they come from Hong Kong, so I have to wait a couple of weeks but my device will be like new again! You may be able to but just the digitiser without the housing... worth a look
Short term solution is to pull apart with duct tape until newton rings disappear.
grahamkdt said:
You can get a brand new housing and digitiser from eBay for £24.99... I've just ordered one for mine. Unfortunately, they come from Hong Kong, so I have to wait a couple of weeks but my device will be like new again! You may be able to but just the digitiser without the housing... worth a look
Click to expand...
Click to collapse
What do I exactly search on ebay ? Got link where did you buy ?
And how do you replace it ?
Joker2206 said:
Hi.
My Diamond 2 has stopped working with touch screen commands.
Problem:
The upper layer of touch screen somehow separated from some part inside, and phone doesn't react to touch commands.
It's same as you take for example transparent label and stick it to some glass and in some places you see bubbles, but it's much bigger area.
Solution:
Phone going to service.
Anyone had same problem with your phone ?
Image attached.
Click to expand...
Click to collapse
Same on my device, I will send to service.
Can anyone confirm a new digitizer fixes the problem? Seems like it would, just don't want to tear my phone apart and wait 2 weeks for one to find out it's something else.
Daisjun said:
Can anyone confirm a new digitizer fixes the problem? Seems like it would, just don't want to tear my phone apart and wait 2 weeks for one to find out it's something else.
Click to expand...
Click to collapse
Some people did confirm. Try reading post from a link that cyron wrote on first reply to me.
I've had mine repaired twice in the last 3 months with this problem. Warranty covered the repairs. Apparently according to the UK support 'it's not a common fault'. Yeah!
touchscreen can be actuated
I am Brazilian, sorry for my bad English.
I saw the picture on screen seems to be driven directly, if your appliance has pelicula try to remove it. May be keeping the touchscreen.
It happened to me.
TD2 - WM6.5 - Manila2.5 - PTG
Julio Cesar Carneiro Alves
Contagem, MG
Brasil
juliocesar.ca said:
I am Brazilian, sorry for my bad English.
I saw the picture on screen seems to be driven directly, if your appliance has pelicula try to remove it. May be keeping the touchscreen.
It happened to me.
TD2 - WM6.5 - Manila2.5 - PTG
Julio Cesar Carneiro Alves
Contagem, MG
Brasil
Click to expand...
Click to collapse
Read my last post here.
http://forum.xda-developers.com/showthread.php?p=5923901#post5923901
Same problem
touchscreen was working today morning, took battery out for 2 hours, turned it back on and it was working abit weird, and now i cant press any touchscreen buttons atall!
So no softkeys (pick call, home etc.) and nothining on the big screen! I can turn on the phone, press the power button and volume buttons, see my home screen get calls etc.. hard reset twice, took battery out, nothing does it .. gonna try flash it but dont think itll do it ... and ideas?
Im in uk aswell if that makes a diff
Dear All,
I have similar problem. Usuallí I use on my HD NRG ROM. About 3 weeks ago I updated to the latest NRG WM 6.5 23xxx ROM with Sense 2.5 Maxmanila version, and since this upgrade the touch screen position moving randomized up or down from 2 mm to 30mm!!! After this ROM I tryed updating each newer version, but not changed nothing. I need realign the screen about 10 times / day!!! The phone I never dropped or cracked.
Can help me somebody what happened with my HD?
I had this happen to me yesterday. I was surfing on my phone as per the norm. Put my phone down. Got a txt, picked it up and it wouldnt allow me to access it. I thought it must be a freeze as it has happened occasionally.
So I restarted.............and nothing. No response AT ALL from the touch screen.
I have noticed the oily spot problem on the most part of my screen, and thescreen doesnt have that little give it used to when using it (paranoia possibly)
So I can only assume something has given within the screen. Ive been searching all day on the internet for causes and fixes but nothing has come up.
The volume and power buttons work but I cant do anything at all with the phone as its obviously all touch based.
Is this a screen replacement job then or is the whole phone goosed?
Roheelshah if you turn your phone off do you have the massive oily screen thing?
Any help is most appreciated....
I had the same thing, a oily spot, but it was there for months, then i noticed another new spot (looked like a tiny tiny burn) and thats when it stopped working completely... ive ordered a new screen which should be comming in a few days, im hoping thats the issue
will let you know if it works ....
keep me updated if you find anything
thanks!
NECROSTONE said:
I had this happen to me yesterday. I was surfing on my phone as per the norm. Put my phone down. Got a txt, picked it up and it wouldnt allow me to access it. I thought it must be a freeze as it has happened occasionally.
So I restarted.............and nothing. No response AT ALL from the touch screen.
I have noticed the oily spot problem on the most part of my screen, and thescreen doesnt have that little give it used to when using it (paranoia possibly)
So I can only assume something has given within the screen. Ive been searching all day on the internet for causes and fixes but nothing has come up.
The volume and power buttons work but I cant do anything at all with the phone as its obviously all touch based.
Is this a screen replacement job then or is the whole phone goosed?
Roheelshah if you turn your phone off do you have the massive oily screen thing?
Any help is most appreciated....
Click to expand...
Click to collapse
download and install this _HTC Touch HD_TouchHD system.exe
BOLDESH said:
download and install this _HTC Touch HD_TouchHD system.exe
Click to expand...
Click to collapse
whats it do? and where from??
I just posted something like this a few days ago, pulled my phone out and screen wouldnt respond, had these marks all over my screen, "swirly marks" as i describe it, very well could be the oily marks you are talking about. you can move them around with your finger right?
anyway, i took my sim out, tryna find a spare phone, couple hours later the marks were gone and screen started working again, touch wood its been fine since.
no idea what happened, but try letting it air out or something
ok basically i received a new digitizer today (the actual touchscreen) ...
i dismantled the whole phone using the service manual and some video some guy made (VERY HELPFUL, if anyone wants it for any reason i can post a link), ok so i got rid of all the top bits, the circuit boards (or watever theyre called)
I got down to just the bezel, lcd and digitizer (dont know what a bezel is, the lcd is where the display actually is and digitizer is directly stuck ontop of that)
Apparently when replacing the screen, htc have made it so that you have to replace all three of those parts instead of individual ones, but you can buy them seperately so i thought i'd hero it.
i poked out the screen from the frame (some chewingum like stuff holding it in) then i started peeling off the digitizer (if you get one and want to try it you'll know where to peel) ... this was a mistake tho cause the lcd is unbelievebly sensitive so while peeling off it left scratches on the lcd, and me not knowing the lcd is sticky tried to wipe them and use a dust free cloth, which left alot of crap on the actual lcd!
i managed to get the digitizer off and ripped the cable that goes from digitizer to whatever reads our fingers on the screen, took it all off, placed the new one directly ontop and fed the wire exactly how it was for the first screen.
Put it all together again
Now I did mess up my screen badly, but in a good way! .. i now have full touchscreen working (smoother than ever) but my LCD display is near enough gone, so it looks like the screens really really dark, and i have to tilt it at certain angles to see the screen..
After all of this i now have a touch hd i can controll from my pc (using mymobiler) so i can recieve calls, send texts all from my pc when connected thru active sync, can even play teeter ... but not really the same!
I wouldnt recomend anyone to try what i did, although i think its worth the risk as I would have to replace the lcd anyways if i wanted a new screen in the first place... and who knows you might be able to peel the digitizer off clean (NEVER EVER EVER TOUCH LCD WITH ANYTHING!!!).
It all cost me around 10-15£ for the digitizer and screwdrivers and alot of hours dismantling phone compared to 50-100£ for a new lcd.
I am either going to get a new lcd now so i can actually see the screen, or get a new phone.
Sorry for the essay but hopefully this helps someone in any similar situation
if i do get a new lcd will post how it goes and if it sorts out everything
if anyone knows of any other reasons why my lcd would be so dim (brightness is 100%) accept for me getting carried away with it ... help would be appreciated
the_cool said:
I just posted something like this a few days ago, pulled my phone out and screen wouldnt respond, had these marks all over my screen, "swirly marks" as i describe it, very well could be the oily marks you are talking about. you can move them around with your finger right?
anyway, i took my sim out, tryna find a spare phone, couple hours later the marks were gone and screen started working again, touch wood its been fine since.
no idea what happened, but try letting it air out or something
Click to expand...
Click to collapse
Yeah swirly oil marks is how myne started ... i think i finished off the screen by trying to press hard on the mark to try and clear it .. . so be careful with it.. but think that overall the screen had seen better days (course only a few weeks after warrenty finishes) ... all conections inside were ok aswell
doczyus said:
Dear All,
I have similar problem. Usuallí I use on my HD NRG ROM. About 3 weeks ago I updated to the latest NRG WM 6.5 23xxx ROM with Sense 2.5 Maxmanila version, and since this upgrade the touch screen position moving randomized up or down from 2 mm to 30mm!!! After this ROM I tryed updating each newer version, but not changed nothing. I need realign the screen about 10 times / day!!! The phone I never dropped or cracked.
Can help me somebody what happened with my HD?
Click to expand...
Click to collapse
Same here. Touch screen not working. Phone never flashed, droped,...
Any solution?
unfortunately, a friend of mine changed the touchscreen without success. Phone was in perfect state, no drop, no flash. Just the touch not responding. I'm not sure that changing whole part lcd+digitizer solve the problem.
Hi all!
I've got similar problem with my touch HD. It's stock since I bought it. My touch sense was acting weird, like it wasn't properly calibrated. Like, when I press 7 on phone pad, the phone actually presses 1, and if I press 0, phone presses 5 and so on..
I've tried to align the screen, but it doesn't get aligned the first time. I have to repeat the process about 4 times before it gets aligned. That's good for about few minutes and the problem is back. Hard reset was also done, 2 times.
Could this be a fixed with a software update? Does this mean that digitizer will soon be dead?
Thank you for your help
Regards
igothtc2 said:
Hi all!
I've got similar problem with my touch HD. It's stock since I bought it. My touch sense was acting weird, like it wasn't properly calibrated. Like, when I press 7 on phone pad, the phone actually presses 1, and if I press 0, phone presses 5 and so on..
I've tried to align the screen, but it doesn't get aligned the first time. I have to repeat the process about 4 times before it gets aligned. That's good for about few minutes and the problem is back. Hard reset was also done, 2 times.
Could this be a fixed with a software update? Does this mean that digitizer will soon be dead?
Thank you for your help
Regards
Click to expand...
Click to collapse
use ScreenCal to fix it, hopefully it can help you
Hakim Rahman said:
use ScreenCal to fix it, hopefully it can help you
Click to expand...
Click to collapse
Hi!
I've successfuly installed the cab file on my phone's sd card, but the problem is still there. I don't know where the installed files are, do I have to run this application?
Thank you for your help!
Regards
igothtc2 said:
Hi!
I've successfuly installed the cab file on my phone's sd card, but the problem is still there. I don't know where the installed files are, do I have to run this application?
Thank you for your help!
Regards
Click to expand...
Click to collapse
have you hard reset the device after installing the cab file ?? if not do it and see if there are changes...
Hakim Rahman said:
have you hard reset the device after installing the cab file ?? if not do it and see if there are changes...
Click to expand...
Click to collapse
Just did the hard reset. When it asked me to align the screen, I just couldn't align the top left corner. I had to press it like 50 times before cross went to the lower corner. Otherwise, after the align it's good for about couple of seconds and then it's just pressing all over.
I thought I had just some software issues because the screen wasn't dead, it responded to my touch. So, I'll probably have to buy a new screen and digitizer, right? Or do you have any other ideas?
Thank you again for your help!
Regards
firstly screencal installs calibration settings not for blackstone so do not install it, no point. (btw it also increases device touch sensitivity)
secondly you guys should try and install the calibration settings for blackstone, basicly what the align screen does, not sure where to find them for download but i could post the registrys if someone wants to make a .cab from them. (atm i cba making the .cab but i am able to do it )
if the calibration settings do not work i think it is best to buy a new lcd package (or buy new device and give me old one for spares oj)
Rn
hi buddy ! What you mean GSensorCalibrator ??
i didnt mention anything about gsensor calibration dude.
tried and tested screencal the other week and it screwed my blackstone.
install these instead:
*screen calibration, sets the blackstone touch points: (aligning the screen)
if you install a cab with these registrys it should fix the alignment problem.
(if it doesnt then its hardware issue = lcd etc)
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
"MaxCalError"=dword:8
"CalibrationData"="511,542 183,881 183,198 834,197 833,880"
*this one will maximise the touch sensitivity for those that want it:
[HKEY_LOCAL_MACHINE\Drivers\TouchPanel]
"PressureThreshold"=dword:0
Rn
Does anyone have a recommendation where you can buy a digitizer and lcd from?
Hello, I have a Motorola Defy, that I dropped a few times, so the LCD screen got damaged with blue dots on it, I made a mistake and thought that the problem was on the touch Screen, so I purchased a replacement, installed but, it was damaged, the touch did not respond correctly, I wasn't able to type correctly among other problems.
I got a refund, then ordered a LCD screen replacement, now that I have it here, I install it, and it's broken:crying: I know, bad luck and being a rookie while trying to fix my phone, ok, I put back my old (damaged) LCD screen to use it in the meantime, and the old touch screen, but now, the old touch screen that was supposed to being working fine, it doesn't, it has the same problem as the touch screen that I bought.
Question is: the problem with the touch screen, could be related to the damaged LCD screen? or the motherboard of the phone is damaged? the phone works great, the apps, the games, everything but the touch screen and the LCD screen, but, as I said, I went back to the default touch screen after using the damaged one that I received, and it works worse I don't know what's wrong, please help me out, sorry for the long post
Please post questions in the Q&A section. Moved there.
Put it in the freezer for 1-2 hours
Sent from my MB525 using xda app-developers app
ppero196 said:
Put it in the freezer for 1-2 hours
Sent from my MB525 using xda app-developers app
Click to expand...
Click to collapse
Is this true?
true. fix some minor dead pixel if you put in freezer for one day. but your case... im dont hope much.
Try changing LCD + Capacitive Digitizer. (after trying the freezer trick ofcourse)
Well i will tell my story, which is related to your's as well,
i had a phone with resistive touch screen and it got screwed up, that is it does not respond correctly. So, i took it to the service center and they replaced the digitizer (touch screen) saying that previous one is broken. But, luckily the new one didn't responded to any touches they make.So, they replaced it again with the old one quoting that "your phone can't be repaired". So, i took it home with me.
Later i thought to calibrate the screen but the old one is not responding any more, no matter where i press
Later i calibrate it with the help of a software for windows mobile with the help of a PC. It took me to the calibration screen, from where i calibrated it, and voila, it worked... as good as a new one :victory:
long story short,
i think when you disconnected your digitizer, phones default values/drivers got messed up and are unable to find the new or the old digitizer you connect. I suggest you to go to the service center as these screens can not be calibrated.
Is there NO WAY at all to recalibrate the screen from the phone itself? or using an application? the delicalibration might be the problem....I'd like to fix it myself :/ thanks for the tip, never heard about it before!!
saman0suke1 said:
Is there NO WAY at all to recalibrate the screen from the phone itself? or using an application? the delicalibration might be the problem....I'd like to fix it myself :/ thanks for the tip, never heard about it before!!
Click to expand...
Click to collapse
Did you change the LCD and the Digitizer (both of em) again ?
dark_prince said:
Did you change the LCD and the Digitizer (both of em) again ?
Click to expand...
Click to collapse
I replaced my original digitizer screen for the one I ordered it, it gave me problems, so I went back to the original one, which was working fine, and now it's not fully responding, that's why I'm assuming is something calibration related, thanks!
help
my search button back light is not glowing ..i saw it is also not glowing in recovery...any help