Hello, I bought a second hand prophet. But I have a problem with the screen : the screen does not respond exactly where I put the pen. For exemple, on the keyboard, if I put the pen on the "E" key, it is the "D" wich is pressed ...
This only happen in the middle of the screen. No problems on the top or the bottom of it.
Of course I tried to re-calibrate the screen many times but it does not solve the problem.
Does anyone know where does this problem come from ?
Thanks a lot !
hello
do the screen alignement , it helped for me
grtzzz
you can find this in settings___system ___ screen and choose align
Like I said, I already did the re-alignement. But it didn't solve my problem.
touchscreen problem
hello,
u can try to update the rom , maybe that could be a solution , you find it in the wiki of the prophet on how to do it
grtzzz
grey
dizzy33 said:
Hello, I bought a second hand prophet. But I have a problem with the screen : the screen does not respond exactly where I put the pen. For exemple, on the keyboard, if I put the pen on the "E" key, it is the "D" wich is pressed ...
This only happen in the middle of the screen. No problems on the top or the bottom of it.
Of course I tried to re-calibrate the screen many times but it does not solve the problem.
Does anyone know where does this problem come from ?
Thanks a lot !
Click to expand...
Click to collapse
Well it is very likely that your touchscreen is damaged but not your LCD. There is actually 2 portions to the screen which most ppl assume there was only one(well I did initially until finding out later when my screen broke and got it replaced). Anyway, if you've tried re-calibrating it and doesn't work..maybe your screen protector (if you do use one) maybe be at fault? Other than that, worse case scenario, it is your touchscreen that is physically damaged. FYI it is not really expensive to replace compared to the LCD part.
Speak to njbridges if you need to get it replaced.
http://forum.xda-developers.com/showthread.php?t=323981
I already upgraded the ROM to latest french version ... It didn't help in that.
Anyway, thanks a lot for your answers !
I had the same problem. Unfortunately it was a problem with the touch screen which was fixed under warranty.
the simply answer is
try to change ur screen protector, or just remove and re-put it on again
just try...
beer2nd said:
the simply answer is
try to change ur screen protector, or just remove and re-put it on again
just try...
Click to expand...
Click to collapse
Hello.
I tried to do that, because I had problems to align screen.
I changed the touchscreen with another from a broken LCD. But now all I can get is a white screen, then a sound (like the starting sound when you make a hard reset or remove batery) and after black screen again.
What can I do to bring it back.
I've noticed that the touchscreen had some white glue where is the connection with the LCD. Do I need to replace that glue, maybe is a special glue with small voltage conductibility ? Or ? Help!
Anyone changed the touchscreen ?
PS: I think I will start a new post, maybe I will get some answers!
i haved thar problem... like you.... i just bought an ney TOUCH SCREEN new... and it was solved.... ATENTION only the touchscreen... not the lcd!
P4k1t0 said:
i haved thar problem... like you.... i just bought an ney TOUCH SCREEN new... and it was solved.... ATENTION only the touchscreen... not the lcd!
Click to expand...
Click to collapse
When you buy a new touch screen you buy with some conectors or only the plastic rectangle ?
saxxen said:
When you buy a new touch screen you buy with some conectors or only the plastic rectangle ?
Click to expand...
Click to collapse
well... i have to cut with a scissors the conecters to conect right on lcd screen... and it worked
P4k1t0 said:
well... i have to cut with a scissors the conecters to conect right on lcd screen... and it worked
Click to expand...
Click to collapse
When you say cut it means that a part of the conectors still remain on the touchscreen (under the touchscreen). Or no conectors at all on the touchscreen and that means you removed the connectors (pulled out).
Do you know if I have any chance to take another touchscreen from a defect device and work ?
Related
Have a "small" problem with my touchscreen, it requires to be aligned every day,and by that i mean that the alignment doesn't hold much long...that means sms typing is extremely hard when you push one letter he shows you another that lays next to it .Is it due to the touchscreen or the system....i didn't do any ROM update i still have the original software on him:
ROM Ver.: 1.12.01 GER
Radio Ver. : 1.12.00
ExtRom ver. : 1.12.151 GER
Many thanks!!
i think it it the problem of touch screen
i think it it the problem of touch screen.after extrem use of touch screen its loes the alinement for this you replace the touch screen from your hardware guy.
Thanks for all
Hi i fixed the problem with a ROM update and i didn't install extra programs that i had before like ( Pocket plus or Calendar ++...... ), anyway now i don't have to align the screen. I don't know is it the ROM update or the additional software but the touchscreen is now working perfectly.
So if someone else have a similar problem don't replace the screen right away.
Thanks
it's hardware problem.
my xda mini also..
but i know how to fix this problem.
Maybe with you it was, my MDA is now working perfectly and i don't need to align my screen every day as i did before.That doesn't mean that all have such a problem,i am only telling you my experience with it.
Best regards from Vienna
Hello, in my magician is not everyday, hapens all the time that i turn on it.
I had replace it 3 times, but i can find a good dealer of touchs. You knows one that seel a good touch?
regard's,
Ricardo
Guys,
I've had that problem for a LONG time and today i finally got tired and decided to fixed it...here's how i've done it: You just need to lift a little bit up, a few small metal pins which are all around the touchscreen (see the picture in attachment). This will force the touchscreen to remain in place and will end all your problems related to touchscreen alignments.
Regards,
Keeper
so it does help? what do these pins do?
IS THERE REALLY NO SOLUTION TO THAT PROBLEM???
(* the pins have nothing to do with the touchscreen, they are what holds aluminum shell on the plastic chasis)
i had an o2 mini with 1.11 rom and its touch screen was not quite sensitive.. had to tap or drag stylus very hard..
but after upgrading to 2.03TX.. to my surprise.. my PDA now has very good touch screen response!
hi, i have this problem
I tryed to re-flash rom or adjust metal pins but the problem persists.
Anyone have another solution?
Plese help me, i want to save my pupil
i have the same problem. the o2 is really a great little phone but i think im going to be forced to upgrade
i also got a unit mini xda from a friend, he said it is dropped and can't tap screen. i hold and press the screen, then slide up and down, side by side, and now its ok.
Trullalero said:
Anyone have another solution?
Click to expand...
Click to collapse
Probably it's problem with flat wire that connects screen with mainboard.
You need to open yours xda, find that wire, unplug it from mainboard, clean its pins with alcohol and plug into again.
From this time mine xda doesn't decalibrating anymore
khuan said:
i also got a unit mini xda from a friend, he said it is dropped and can't tap screen. i hold and press the screen, then slide up and down, side by side, and now its ok.
Click to expand...
Click to collapse
hi khuan thanks for the great tip.. you save my $$$!
I was just thinking to upgrade my mini since it response too slow when i tap the screen
but now it works just as it is new.
guys.. try khuan tip.. it really works!
khuan said:
i also got a unit mini xda from a friend, he said it is dropped and can't tap screen. i hold and press the screen, then slide up and down, side by side, and now its ok.
Click to expand...
Click to collapse
what exactly do you mean?
can you be more specific ?
Screen Setting
new_ppc_user said:
what exactly do you mean?
can you be more specific ?
Click to expand...
Click to collapse
Hi
My cell also had the same problem. There is a bunch of wires coming from the back of touch screen, these wires fix inside a socket. There is a black color cover that fix the wires inside that socket. During mishandling that cover got loose, that's why your cell loose the screen setting. I fixed that cover and now my Jam works perfectly. (Do it if you have the courage to open your cell)
Ali
Hello, I just bought a used O2 mini and had this same problems. I finally found a quick way to restore the calibration that goes out every restarts.
Using resco registry editor, I found the data stored here->
HKEY_LOCAL_MACHINE/HARDWARE/DEVICEMAP/TOUCH/CalibrationData
So I make 1 clean alignment and quickly went and export the Touch key into my Storage. Now every time the alignment goes haywire, I just import the data back. Hope it helps.
Hy everybody.. today i've bought a qtek 9100/spv m3000 from a guy...but when i've opened the phone.. he says to "aling scree" and in the center of the screen is a target...when i tap in the middle of the target..nothing happends.. just when i tap in a corner.. and after that if i tap.. the middle of the target.. it moves.. but it does nothing.. when i tap it in the center of the screen ( why.. does somebody knows.. why ? or how to bypass the screen align ? please.. help..
Come on.. nobody knows nothing about my problem ?
You have to align the screen in both directions (horizontal and vertical). After that it should work...
zuzuzuzu said:
Come on.. nobody knows nothing about my problem ?
Click to expand...
Click to collapse
got a similar problem. You probably have a dead spot in the middle of the screen, like me. You gotta try and get as close as possible, but then on every other marker you gotta hit it in the same spot.
If it won't go to another marker do a hard reset or try a different rom.
U don't understand.. almost 1cm and 1.5cm from the middle of the screen doesn't work .. im sure that the digitizer of the lcd display is broken ..
uninstal FTouchFlo and softreset. work 100%
I have had this issue also on an O2 Mini S, luckily it happened 1 month before the warrantee ran out.
I noticed the screen was getting a little unresponsive in the center of the screen and then I hard reset the device before it was sent back to O2, after this I couldn't even calibrate the screen.
It was replaced in the end.
Sorry, good luck.
D.
I need your advice...
My Touch Screen doesn't function, I cannot dial out, Faulty LCD or Touch Screen (or both), While I click on the screen it doesn’t respond or it has a shift, I click on the top of the screen and it actual click on the middle of the screen.
I have no problem with the display - it display everything and correctly with full color.
What I think is that I have a problem with my touch screen.
Did anyone had a problem with the touch screen and replace it?
What is strange, when I hrad reset the device, on screen alignment process I have no problem to click on the cross, but it takes the device up to 3-4 times to aligen the device.
I want to order the touch screen part and replace it, I don't have warranty.
Do I need to replace the LCD as well or just the touch screen? Either way it will be cheaper to buy them both then to send it to repair.
when the backlight is off...and you hold the phone 20 cm for your eye`s and turn a bit up and down in a room with light...can you see a oil film on the screen...???
that is the digitizer....sorry german english..
[email protected] said:
when the backlight is off...and you hold the phone 20 cm for your eye`s and turn a bit up and down in a room with light...can you see a oil film on the screen...???
that is the digitizer....sorry german english..
Click to expand...
Click to collapse
First - thanks for your time and for your help.
Well I don't understand what do you mean by saying, "can you see a oil film"
When the backlight is off (black screen - the device is on stand by) - I can see only black screen and my reflection...
Sorry...my english...So look in that thread and you understand what i mean...
http://forum.xda-developers.com/showthread.php?t=475294
i have it send in repair because of warrenty...but on ebay...you can buy for 30 €
when the problem is that...but i dont know...i hope that is helpful
I don't have this oil or bubbles on my screen...
Hardware...Connector(cable)....Software(Rom).....did you flash it..??
Sorry i don`t know...
I hope you find it
I can eliminate the software, I try to flash it with several roms and radios, include the origanl HTC shipped rom.
Well I ordered the LCD+Touch screen, waiting for this parts and then I will see.
Thanks for your help
i have similar problem but my screen is decentered just few milimerts
i sent it to waranty check twice but it came back that no problems apear
when i center display it its ok but max for 1 day or even less
so im currious if changing LCD will help ...
kobein said:
so im currious if changing LCD will help ...
Click to expand...
Click to collapse
I will let you when I will replace the Touch Screen with or without the LCD.
This should help........did this a few months ago, all working fine with no problems.
Check this out....
http://forum.xda-developers.com/showthread.php?t=392301&highlight=digitizer
ProvRobbie said:
This should help........did this a few months ago, all working fine with no problems.
Check this out....
http://forum.xda-developers.com/showthread.php?t=392301&highlight=digitizer
Click to expand...
Click to collapse
I ordered from the same store "keep_beauty", and they already shipped it, I looked in your recommendation and his guide.
touchscreen was working today morning, took battery out for 2 hours, turned it back on and it was working abit weird, and now i cant press any touchscreen buttons atall!
So no softkeys (pick call, home etc.) and nothining on the big screen! I can turn on the phone, press the power button and volume buttons, see my home screen get calls etc.. hard reset twice, took battery out, nothing does it .. gonna try flash it but dont think itll do it ... and ideas?
Im in uk aswell if that makes a diff
Dear All,
I have similar problem. Usuallí I use on my HD NRG ROM. About 3 weeks ago I updated to the latest NRG WM 6.5 23xxx ROM with Sense 2.5 Maxmanila version, and since this upgrade the touch screen position moving randomized up or down from 2 mm to 30mm!!! After this ROM I tryed updating each newer version, but not changed nothing. I need realign the screen about 10 times / day!!! The phone I never dropped or cracked.
Can help me somebody what happened with my HD?
I had this happen to me yesterday. I was surfing on my phone as per the norm. Put my phone down. Got a txt, picked it up and it wouldnt allow me to access it. I thought it must be a freeze as it has happened occasionally.
So I restarted.............and nothing. No response AT ALL from the touch screen.
I have noticed the oily spot problem on the most part of my screen, and thescreen doesnt have that little give it used to when using it (paranoia possibly)
So I can only assume something has given within the screen. Ive been searching all day on the internet for causes and fixes but nothing has come up.
The volume and power buttons work but I cant do anything at all with the phone as its obviously all touch based.
Is this a screen replacement job then or is the whole phone goosed?
Roheelshah if you turn your phone off do you have the massive oily screen thing?
Any help is most appreciated....
I had the same thing, a oily spot, but it was there for months, then i noticed another new spot (looked like a tiny tiny burn) and thats when it stopped working completely... ive ordered a new screen which should be comming in a few days, im hoping thats the issue
will let you know if it works ....
keep me updated if you find anything
thanks!
NECROSTONE said:
I had this happen to me yesterday. I was surfing on my phone as per the norm. Put my phone down. Got a txt, picked it up and it wouldnt allow me to access it. I thought it must be a freeze as it has happened occasionally.
So I restarted.............and nothing. No response AT ALL from the touch screen.
I have noticed the oily spot problem on the most part of my screen, and thescreen doesnt have that little give it used to when using it (paranoia possibly)
So I can only assume something has given within the screen. Ive been searching all day on the internet for causes and fixes but nothing has come up.
The volume and power buttons work but I cant do anything at all with the phone as its obviously all touch based.
Is this a screen replacement job then or is the whole phone goosed?
Roheelshah if you turn your phone off do you have the massive oily screen thing?
Any help is most appreciated....
Click to expand...
Click to collapse
download and install this _HTC Touch HD_TouchHD system.exe
BOLDESH said:
download and install this _HTC Touch HD_TouchHD system.exe
Click to expand...
Click to collapse
whats it do? and where from??
I just posted something like this a few days ago, pulled my phone out and screen wouldnt respond, had these marks all over my screen, "swirly marks" as i describe it, very well could be the oily marks you are talking about. you can move them around with your finger right?
anyway, i took my sim out, tryna find a spare phone, couple hours later the marks were gone and screen started working again, touch wood its been fine since.
no idea what happened, but try letting it air out or something
ok basically i received a new digitizer today (the actual touchscreen) ...
i dismantled the whole phone using the service manual and some video some guy made (VERY HELPFUL, if anyone wants it for any reason i can post a link), ok so i got rid of all the top bits, the circuit boards (or watever theyre called)
I got down to just the bezel, lcd and digitizer (dont know what a bezel is, the lcd is where the display actually is and digitizer is directly stuck ontop of that)
Apparently when replacing the screen, htc have made it so that you have to replace all three of those parts instead of individual ones, but you can buy them seperately so i thought i'd hero it.
i poked out the screen from the frame (some chewingum like stuff holding it in) then i started peeling off the digitizer (if you get one and want to try it you'll know where to peel) ... this was a mistake tho cause the lcd is unbelievebly sensitive so while peeling off it left scratches on the lcd, and me not knowing the lcd is sticky tried to wipe them and use a dust free cloth, which left alot of crap on the actual lcd!
i managed to get the digitizer off and ripped the cable that goes from digitizer to whatever reads our fingers on the screen, took it all off, placed the new one directly ontop and fed the wire exactly how it was for the first screen.
Put it all together again
Now I did mess up my screen badly, but in a good way! .. i now have full touchscreen working (smoother than ever) but my LCD display is near enough gone, so it looks like the screens really really dark, and i have to tilt it at certain angles to see the screen..
After all of this i now have a touch hd i can controll from my pc (using mymobiler) so i can recieve calls, send texts all from my pc when connected thru active sync, can even play teeter ... but not really the same!
I wouldnt recomend anyone to try what i did, although i think its worth the risk as I would have to replace the lcd anyways if i wanted a new screen in the first place... and who knows you might be able to peel the digitizer off clean (NEVER EVER EVER TOUCH LCD WITH ANYTHING!!!).
It all cost me around 10-15£ for the digitizer and screwdrivers and alot of hours dismantling phone compared to 50-100£ for a new lcd.
I am either going to get a new lcd now so i can actually see the screen, or get a new phone.
Sorry for the essay but hopefully this helps someone in any similar situation
if i do get a new lcd will post how it goes and if it sorts out everything
if anyone knows of any other reasons why my lcd would be so dim (brightness is 100%) accept for me getting carried away with it ... help would be appreciated
the_cool said:
I just posted something like this a few days ago, pulled my phone out and screen wouldnt respond, had these marks all over my screen, "swirly marks" as i describe it, very well could be the oily marks you are talking about. you can move them around with your finger right?
anyway, i took my sim out, tryna find a spare phone, couple hours later the marks were gone and screen started working again, touch wood its been fine since.
no idea what happened, but try letting it air out or something
Click to expand...
Click to collapse
Yeah swirly oil marks is how myne started ... i think i finished off the screen by trying to press hard on the mark to try and clear it .. . so be careful with it.. but think that overall the screen had seen better days (course only a few weeks after warrenty finishes) ... all conections inside were ok aswell
doczyus said:
Dear All,
I have similar problem. Usuallí I use on my HD NRG ROM. About 3 weeks ago I updated to the latest NRG WM 6.5 23xxx ROM with Sense 2.5 Maxmanila version, and since this upgrade the touch screen position moving randomized up or down from 2 mm to 30mm!!! After this ROM I tryed updating each newer version, but not changed nothing. I need realign the screen about 10 times / day!!! The phone I never dropped or cracked.
Can help me somebody what happened with my HD?
Click to expand...
Click to collapse
Same here. Touch screen not working. Phone never flashed, droped,...
Any solution?
unfortunately, a friend of mine changed the touchscreen without success. Phone was in perfect state, no drop, no flash. Just the touch not responding. I'm not sure that changing whole part lcd+digitizer solve the problem.
Hi all!
I've got similar problem with my touch HD. It's stock since I bought it. My touch sense was acting weird, like it wasn't properly calibrated. Like, when I press 7 on phone pad, the phone actually presses 1, and if I press 0, phone presses 5 and so on..
I've tried to align the screen, but it doesn't get aligned the first time. I have to repeat the process about 4 times before it gets aligned. That's good for about few minutes and the problem is back. Hard reset was also done, 2 times.
Could this be a fixed with a software update? Does this mean that digitizer will soon be dead?
Thank you for your help
Regards
igothtc2 said:
Hi all!
I've got similar problem with my touch HD. It's stock since I bought it. My touch sense was acting weird, like it wasn't properly calibrated. Like, when I press 7 on phone pad, the phone actually presses 1, and if I press 0, phone presses 5 and so on..
I've tried to align the screen, but it doesn't get aligned the first time. I have to repeat the process about 4 times before it gets aligned. That's good for about few minutes and the problem is back. Hard reset was also done, 2 times.
Could this be a fixed with a software update? Does this mean that digitizer will soon be dead?
Thank you for your help
Regards
Click to expand...
Click to collapse
use ScreenCal to fix it, hopefully it can help you
Hakim Rahman said:
use ScreenCal to fix it, hopefully it can help you
Click to expand...
Click to collapse
Hi!
I've successfuly installed the cab file on my phone's sd card, but the problem is still there. I don't know where the installed files are, do I have to run this application?
Thank you for your help!
Regards
igothtc2 said:
Hi!
I've successfuly installed the cab file on my phone's sd card, but the problem is still there. I don't know where the installed files are, do I have to run this application?
Thank you for your help!
Regards
Click to expand...
Click to collapse
have you hard reset the device after installing the cab file ?? if not do it and see if there are changes...
Hakim Rahman said:
have you hard reset the device after installing the cab file ?? if not do it and see if there are changes...
Click to expand...
Click to collapse
Just did the hard reset. When it asked me to align the screen, I just couldn't align the top left corner. I had to press it like 50 times before cross went to the lower corner. Otherwise, after the align it's good for about couple of seconds and then it's just pressing all over.
I thought I had just some software issues because the screen wasn't dead, it responded to my touch. So, I'll probably have to buy a new screen and digitizer, right? Or do you have any other ideas?
Thank you again for your help!
Regards
firstly screencal installs calibration settings not for blackstone so do not install it, no point. (btw it also increases device touch sensitivity)
secondly you guys should try and install the calibration settings for blackstone, basicly what the align screen does, not sure where to find them for download but i could post the registrys if someone wants to make a .cab from them. (atm i cba making the .cab but i am able to do it )
if the calibration settings do not work i think it is best to buy a new lcd package (or buy new device and give me old one for spares oj)
Rn
hi buddy ! What you mean GSensorCalibrator ??
i didnt mention anything about gsensor calibration dude.
tried and tested screencal the other week and it screwed my blackstone.
install these instead:
*screen calibration, sets the blackstone touch points: (aligning the screen)
if you install a cab with these registrys it should fix the alignment problem.
(if it doesnt then its hardware issue = lcd etc)
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
"MaxCalError"=dword:8
"CalibrationData"="511,542 183,881 183,198 834,197 833,880"
*this one will maximise the touch sensitivity for those that want it:
[HKEY_LOCAL_MACHINE\Drivers\TouchPanel]
"PressureThreshold"=dword:0
Rn
Does anyone have a recommendation where you can buy a digitizer and lcd from?
Hey guys, I have been so much frustrated about my htc topaz....till now it is working perfectly. Since yesterday all of a sudden touch screen stops working...with ballooning effect on screen ...previously ballooning effect was noticed before 3-4 days,but i did not pay attention on it as touch screen working at that time..
What may be the probable cause is it digitizer or lcd screen gone?
I have uploaded the pictures also..
That's the Chinese Diamond2?
If so I have the same problem with a Chinese phone... There is a part of the screen that's not working fine (like a balloon on the left side of the screen). I have to press really hard and press more to the side than it should be
I've already considered in opening the phone to try to solve the problem.
Does anyone already opened his phone with success? Any pictures available to help the task?
indresh88, sorry to use your topic but I think we both need the same...
I had the same problem, is very usual in this phone. the tecnical changed the screen.
luisitron said:
I had the same problem, is very usual in this phone. the tecnical changed the screen.
Click to expand...
Click to collapse
The problem is that my phone came from China... So I would have to send it there, and that's not an option...
rvrosa said:
That's the Chinese Diamond2?
If so I have the same problem with a Chinese phone... There is a part of the screen that's not working fine (like a balloon on the left side of the screen). I have to press really hard and press more to the side than it should be
I've already considered in opening the phone to try to solve the problem.
Does anyone already opened his phone with success? Any pictures available to help the task?
indresh88, sorry to use your topic but I think we both need the same...
Click to expand...
Click to collapse
no definately not...it's factory unlocked asian version...also it is t5353 and official stock rom.
by the way how can we differentiate between chinese and factory unlock phone?
have you solve your problem?
Hi, use some standard scotch tape or tesa film. Stick it over the affected area and peel the tape off. This should unstick the digitizer again, it did the job for me quite often...
Cheers
badari said:
Hi, use some standard scotch tape or tesa film. Stick it over the affected area and peel the tape off. This should unstick the digitizer again, it did the job for me quite often...
Cheers
Click to expand...
Click to collapse
Please explain that better? I only have to stick some scotch tape on the screen and peel it off?? I have a screen protector, so it's better to take it?
Thanks
indresh88 said:
no definately not...it's factory unlocked asian version...also it is t5353 and official stock rom.
by the way how can we differentiate between chinese and factory unlock phone?
have you solve your problem?
Click to expand...
Click to collapse
I have the T5388i dual sim.
I'm no expert on those phones, but I think an easy way to know if the phone is HTC or Chinese version is the front camera side (on HTC is on the right and on the replica is on the left)
Other simple way is if it's dual sim than it's not from HTC.
If I'm telling some mistakes please someone correct me.
Concerning the problem... it's not solved
rvrosa said:
I have the T5388i dual sim.
I'm no expert on those phones, but I think an easy way to know if the phone is HTC or Chinese version is the front camera side (on HTC is on the right and on the replica is on the left)
Other simple way is if it's dual sim than it's not from HTC.
If I'm telling some mistakes please someone correct me.
Concerning the problem... it's not solved
Click to expand...
Click to collapse
Well according to my research...If you have standard htc phone, you have device name t5353,no dual sim,htc written on left side and front camera on right side....
badari said:
Hi, use some standard scotch tape or tesa film. Stick it over the affected area and peel the tape off. This should unstick the digitizer again, it did the job for me quite often...
Cheers
Click to expand...
Click to collapse
it helped me quite good and temporery, but how to fix it permanently...?
replace the touch screen digitizer.
eBay have many of them...
I have replaced my cracked one last month.
Two fixes for the scotch tape issue
1. Always take along some scotch tape or
2. Replace the digitizer. This can be done faily easily, see some other posts.
Cheers
I've looked at ebay for the digitizer and I've found many... the question is if they work on my phone?
I have a DUAL SIM T5388i, can anyone point me the right digitizer?
I've tried the tape but didn't worked I don't know if I'm doing it right because I've noticed no diference.
Help me!
I also have this problem, It just stopped working. I was calling, 10 minutes later when i took my phone and tried to unlock it, it did nothing, when i connect my phone in windows 7 with mobile center, I installed SOTI pocket controller, to check if it was my screen, and it was because via pocketcontroller it worked good, but how do i have to replace the screen thing, and how does it work with the tape,,
Thanks
i also had the same problem. if im not mistaken it might be due to humidity ...
i might be wrong
is there any way to fix this without replacing digitizer.
by the way i have a TD2 t5353 htc original .
Workign Solution Till Now
Hello Friends,
I have TD2 mobile and today I had same issue. I was thinking it was because of the weather or some.
I remember it did happend several time before, but when I restart the device several time it does work. So I was ignoring.... But today it did not work.. looks like going toward end... So I did soft and hard reset without and that did not helped me.
So I switched off the mobile, "heated" the touch screen gently with my hand for 1 min and started the mobile again and it worked for me .
Not sure if this is a solution, but will work.
May be I will contact Service Center here in Hyderbad and see what is wrong here?
Hope this will help you all...
Thanks.
Well, I've solved the problem... changed the digitizer...
rvrosa said:
Well, I've solved the problem... changed the digitizer...
Click to expand...
Click to collapse
How much that costs you?
prabhat said:
How much that costs you?
Click to expand...
Click to collapse
Take a look at solonomi. That's the place I've bought it.
digitizer for t5388i
Hi, I want to buy digitizer for t5388i, but I didn't find it. I searched at solonomi, ebay, alibaba... Have you any ideas where to buy? Digitizer for t5388i is not same with other t5388 models. Here is picture:
imageshack.us/photo/my-images/263/digitizer2.jpg/
(sorry for incomplete link, but I don't have permision to add images or links)
Many thanks.