I have an i337m with the get.cm CM10.1 and CyanDelta nightlies, and it works fine, but if I try to install a custom kernel (Chronic or Ktoonsez) it installs, but when rebooting out of recovery, it boot loops.
theo1998 said:
I have an i337m with the get.cm CM10.1 and CyanDelta nightlies, and it works fine, but if I try to install a custom kernel (Chronic or Ktoonsez) it installs, but when rebooting out of recovery, it boot loops.
Click to expand...
Click to collapse
where are you getting your kernels? They must be for your device only, and if they are for your device, some may have issues. KT kernels for the i377M should work perfect.
TheAxman said:
where are you getting your kernels? They must be for your device only, and if they are for your device, some may have issues. KT kernels for the i377M should work perfect.
Click to expand...
Click to collapse
The ATT/Canadian Dev and Orig. Dev forums.
So you're saying if I flashed an i337 (or i9505) kernel on an i337m, it could cause that?
TheAxman said:
KT kernels for the i377M should work perfect.
Click to expand...
Click to collapse
Can you provide a link? I can't find it.
theo1998 said:
Can you provide a link? I can't find it.
Click to expand...
Click to collapse
This is where you get the Canadian files from, these are all I can find.
Good luck..
http://forum.xda-developers.com/showthread.php?t=2269304
your welcome
TheAxman said:
This is where you get the Canadian files from, these are all I can find.
Good luck..
http://forum.xda-developers.com/showthread.php?t=2269304
your welcome
Click to expand...
Click to collapse
Thanks
How many different versions do the Canadian have of the i337m? wow, confusing.
Related
Ok, first of all, my phone model is i9505 (Samsung Galaxy S4 International version).
I installed last week a new kernel: http://forum.xda-developers.com/showthread.php?t=2297379 on my phone.
Today I tried to install the cyanogenmod 10.2, now the recovery edition of PhilZ Touch says everytime that there is a prob i9505G etc, which I don't understand.
I think the kernel changed my phone number to i9505G, someone who can help me with this? Thanks.
tareqnull said:
Ok, first of all, my phone model is i9505 (Samsung Galaxy S4 International version).
I installed last week a new kernel: http://forum.xda-developers.com/showthread.php?t=2297379 on my phone.
Today I tried to install the cyanogenmod 10.2, now the recovery edition of PhilZ Touch says everytime that there is a prob i9505G etc, which I don't understand.
I think the kernel changed my phone number to i9505G, someone who can help me with this? Thanks.
Click to expand...
Click to collapse
Hello mate, try a different kernel http://forum.xda-developers.com/showthread.php?t=2502714 then update your philz recovery to newer. have a nice day.
Repulsa said:
Hello mate, try a different kernel http://forum.xda-developers.com/showthread.php?t=2502714 then update your philz recovery to newer. have a nice day.
Click to expand...
Click to collapse
I'm gonna try this, thanks for the fast answer!
+1 :good:
Ok, tried it but did not work, still getting a whole bunch of errors with getprop I9505G etc..
tareqnull said:
Ok, tried it but did not work, still getting a whole bunch of errors with getprop I9505G etc..
Click to expand...
Click to collapse
Can you give us any information on the phone? such as custom rom, root, bootloader,recovery and such? thanks.
Repulsa said:
Can you give us any information on the phone? such as custom rom, root, bootloader,recovery and such? thanks.
Click to expand...
Click to collapse
Yeah sure, just installed stock firmware 4.3 so nothing editted, PhilZ CWM recovery and that's it.
Since the kernel it won't install cm10.2 anymore so yeh...
Nothing much to explain, I don't know why this happens to me, my model number jftlexx is correct but in recovery it gives a bunch of errors with i9505G and the model name of it, forgot it I think it was like jgdlet or something.
tareqnull said:
Yeah sure, just installed stock firmware 4.3 so nothing editted, PhilZ CWM recovery and that's it.
Since the kernel it won't install cm10.2 anymore so yeh...
Nothing much to explain, I don't know why this happens to me, my model number jftlexx is correct but in recovery it gives a bunch of errors with i9505G and the model name of it, forgot it I think it was like jgdlet or something.
Click to expand...
Click to collapse
i found this after reading cm10 that you need to install a compaltible recovery for this "Make sure you have the LATEST version of ClockworkMod recovery. Other recoveries may work but will not be supported by CyanogenMod" either you use a Clockwork recovery http://forum.xda-developers.com/showthread.php?t=2397108 or you can try it with TWRP http://forum.xda-developers.com/showthread.php?t=2468187 and make sure the file you download is not corrupt, please check the Hashcheck that u got the proper file.
Repulsa said:
i found this after reading cm10 that you need to install a compaltible recovery for this "Make sure you have the LATEST version of ClockworkMod recovery. Other recoveries may work but will not be supported by CyanogenMod" either you use a Clockwork recovery http://forum.xda-developers.com/showthread.php?t=2397108 or you can try it with TWRP http://forum.xda-developers.com/showthread.php?t=2468187 and make sure the file you download is not corrupt, please check the Hashcheck that u got the proper file.
Click to expand...
Click to collapse
Fixed it, just used another recovery, TWRP .
Thanks dude for the extra info.
tareqnull said:
Fixed it, just used another recovery, TWRP .
Thanks dude for the extra info.
Click to expand...
Click to collapse
Im glad that helps have a nice day sir.
I'm currently running CM11 (02-07) with ART enabled. I'm thinking of upgrading to the current nightly, but I'm not sure if I need any special steps with ART.
I will be flashing the ROM manually because I need to modify the device number, so I'll probably be doing a reset before, which will of course reset back to Dalvik and remove all my apps.
Now my quesion is, can I backup my apps and user data while in ART with Titanium, and then restore them in Dalvik? I'm thinking of keeping Dalvik so I can flash stock remote and camera.
Thanks,
Vic
Did a Titanium backup, clean install and everything is ok. ART is good, but I'm happy to be able install the remote and camera, and maybe try xposed framework.
victorbrca said:
Did a Titanium backup, clean install and everything is ok. ART is good, but I'm happy to be able install the remote and camera, and maybe try xposed framework.
Click to expand...
Click to collapse
How did you get CM11 to flash on your wind variant g2. When I flash it fails. Its also says no MD5 file found. Please Help.
AndroidNoobeee said:
How did you get CM11 to flash on your wind variant g2. When I flash it fails. Its also says no MD5 file found. Please Help.
Click to expand...
Click to collapse
Here.
http://forum.xda-developers.com/showthread.php?t=2611749
Sent from Tapatalk.
victorbrca said:
Here.
http://forum.xda-developers.com/showthread.php?t=2611749
Sent from Tapatalk.
Click to expand...
Click to collapse
I followed the guide. But when I flash CM it fails. Do need certain kernel or something? What am I doing wrong? Also I have the wind variant if thats important.
AndroidNoobeee said:
I followed the guide. But when I flash CM it fails. Do need certain kernel or something? What am I doing wrong? Also I have the wind variant if thats important.
Click to expand...
Click to collapse
How did you flash recovery?
Sent from Tapatalk.
victorbrca said:
How did you flash recovery?
Sent from Tapatalk.
Click to expand...
Click to collapse
I flashed twrp v2.6.3.2 through flashify. I realize this isn't the most updated version of twrp for my g2 but when i flash the updated vesion (v2.6.3.4) it fails.
AndroidNoobeee said:
I flashed twrp v2.6.3.2 through flashify. I realize this isn't the most updated version of twrp for my g2 but when i flash the updated vesion (v2.6.3.4) it fails.
Click to expand...
Click to collapse
I would go to the thread and ask for help. Also paste the error you get when you try to flash CM11.
Sent from Tapatalk.
victorbrca said:
I would go to the thread and ask for help. Also paste the error you get when you try to flash CM11.
Sent from Tapatalk.
Click to expand...
Click to collapse
I noticed you are using a furnace kernel,Did you flash CM11 with stock lg kernel? If so what version of twrp did you use. I don't understand the problem because I have the dame model as you.
AndroidNoobeee said:
I noticed you are using a furnace kernel,Did you flash CM11 with stock lg kernel? If so what version of twrp did you use. I don't understand the problem because I have the dame model as you.
Click to expand...
Click to collapse
Again, post back at that other thread with the details of what you did and what error you are getting. The more detail you can give the more we can help.
In a nutshell, the recovery that you install will dictate what ROM will work on your device. For some of the ROMs in that thread you will need to install a kernel, but that depends. And I'm not sure what error you are getting.
Sent from Tapatalk.
victorbrca said:
Again, post back at that other thread with the details of what you did and what error you are getting. The more detail you can give the more we can help.
In a nutshell, the recovery that you install will dictate what ROM will work on your device. For some of the ROMs in that thread you will need to install a kernel, but that depends. And I'm not sure what error you are getting.
Sent from Tapatalk.
Click to expand...
Click to collapse
It won't allow me because the thread is only for developers.
How do I know if my phone is jlfte or jlftexx?
I have a:
Galaxy S4 i9505 16gb
Baseband: I9505XXUFNC4
Android: AOSB 4.4.2 (I have flashed the jlfte version but have problem with the camera)
up!
Jflte is the modelnumber for the galaxy s4. Jfltexx is the International model of the galaxy s4.
Different carriers have different modelnumbers because of their lte frequencies. All of them have the Snapdragon 600. If you no carrier restricted phone then you have the jfltexx
Alternativly you could dial *1234#
Gesendet von meinem GT-I9505 mit Tapatalk
And a jflte ROM is for every snapdragon S4. So for the jflteatt, jfltevww, jfltetmo and of course jfltexx. It's called a unified build. The jfltexx is just the i9505. So the device you own. You can flash jfltexx ROMs and jflte ROMs. They both should work.
Me Gusta!
@Me Gusta and @benni2903 thanks guys!
Me Gusta said:
And a jflte ROM is for every snapdragon S4. So for the jflteatt, jfltevww, jfltetmo and of course jfltexx. It's called a unified build. The jfltexx is just the i9505. So the device you own. You can flash jfltexx ROMs and jflte ROMs. They both should work.
Me Gusta!
Click to expand...
Click to collapse
Is the same thing for TWRP? My device is the gt-i9505 jfltevj version. Can i install the TWRP for jfltexx version?
Thanks!
lucasavosani said:
Is the same thing for TWRP? My device is the gt-i9505 jfltevj version. Can i install the TWRP for jfltexx version?
Thanks!
Click to expand...
Click to collapse
No, I'm afraid not. You'll need to find a device specific twrp
Me Gusta said:
No, I'm afraid not. You'll need to find a device specific twrp
Click to expand...
Click to collapse
I'm looking for, but not there aren't much information about that version.
lucasavosani said:
I'm looking for, but not there aren't much information about that version.
Click to expand...
Click to collapse
jfltevj?
Me Gusta said:
jfltevj?
Click to expand...
Click to collapse
yes, gt-i 9505 jfltevj. I bought the cell phone in Brazil
lucasavosani said:
yes, gt-i 9505 jfltevj. I bought the cell phone in Brazil
Click to expand...
Click to collapse
Are you sure? I've never heard of a jfltevj.. could you tell a little more about the device? Which ROMs have you been flashing and did they work?
Me Gusta said:
Are you sure? I've never heard of a jfltevj.. could you tell a little more about the device? Which ROMs have you been flashing and did they work?
Click to expand...
Click to collapse
I never changed the ROM, I'm using the original. This is the first time i'm trying to change de ROM.
I installed Root from JflteXX and it worked. But i know that i can brick my mobile if i install the wrong version of TWRP.
lucasavosani said:
I never changed the ROM, I'm using the original. This is the first time i'm trying to change de ROM.
I installed Root from JflteXX and it worked. But i know that i can brick my mobile if i install the wrong version of TWRP.
Click to expand...
Click to collapse
Yeah, im 99.9% sure you've got a jfltexx. The VJ is just your modem. Just go ahead and flash jfltexx twrp.
Also, the i9505 is nearly, I repeat, nearly unbrickable. Almost everything can be fixed by using Odin.
Me Gusta said:
Yeah, im 99.9% sure you've got a jfltexx. The VJ is just your modem. Just go ahead and flash jfltexx twrp.
Also, the i9505 is nearly, I repeat, nearly unbrickable. Almost everything can be fixed by using Odin.
Click to expand...
Click to collapse
I downloaded those apps, gives me the images data.
lucasavosani said:
I downloaded those apps, gives me the images data.
Click to expand...
Click to collapse
Right... Well, I'm afraid this is the end of my knowledge man... I can't help you out I'm afraid
Me Gusta said:
Right... Well, I'm afraid this is the end of my knowledge man... I can't help you out I'm afraid
Click to expand...
Click to collapse
hahaha ok!! Thank you very much! :good:
I'll search in brazilian forums to see if I find anything about this device!
If I find out anything I'll post it here.
lucasavosani said:
hahaha ok!! Thank you very much! :good:
I'll search in brazilian forums to see if I find anything about this device!
If I find out anything I'll post it here.
Click to expand...
Click to collapse
Good luck!
Me Gusta said:
Good luck!
Click to expand...
Click to collapse
Hi
I researched more about Jfltevj and I didn't find anything. So I decided to install the JFLTEXX version and at first moment it is working normally.
Thanks for your help :good:
lucasavosani said:
Hi
I researched more about Jfltevj and I didn't find anything. So I decided to install the JFLTEXX version and at first moment it is working normally.
Thanks for your help :good:
Click to expand...
Click to collapse
I'm glad to hear that! You don't have any issues with signal?
Me Gusta said:
I'm glad to hear that! You don't have any issues with signal?
Click to expand...
Click to collapse
No, everything is normal!!
After flashing halaszk-UNIVERSAL5420 kernel my Note3 keeps rebooting automatically after screen locking. Tried re-flashing but no change. What to do?? please help!!
souravonfire said:
After flashing halaszk-UNIVERSAL5420 kernel my Note3 keeps rebooting automatically after screen locking. Tried re-flashing but no change. What to do?? please help!!
Click to expand...
Click to collapse
Flash Stock ROM
souravonfire said:
After flashing halaszk-UNIVERSAL5420 kernel my Note3 keeps rebooting automatically after screen locking. Tried re-flashing but no change. What to do?? please help!!
Click to expand...
Click to collapse
Try different kernel and see what it does maybe stock kernel or what ever if you still get reboots then do as said b 4 and flash different rom.
4aces said:
Try different kernel and see what it does maybe stock kernel or what ever if you still get reboots then do as said b 4 and flash different rom.
Click to expand...
Click to collapse
unfortunately there's only one kernel available for exynos version atm. ill try flashing dr.ketan 8.1 rom
souravonfire said:
unfortunately there's only one kernel available for exynos version atm. ill try flashing dr.ketan 8.1 rom
Click to expand...
Click to collapse
You don't have stock kernel on exynos?
Flash Stock kernel first cause that is how can I say.. minimizing the margin of error. If it doesn't work try different rom and at last complete rewind.
4aces said:
You don't have stock kernel on exynos?
Flash Stock kernel first cause that is how can I say.. minimizing the margin of error. If it doesn't work try different rom and at last complete rewind.
Click to expand...
Click to collapse
cant find a separate kernel anywhere
souravonfire said:
cant find a separate kernel anywhere
Click to expand...
Click to collapse
Then going back to stock rom is probably what you have to do or try the rom you suggested. Is it running stock kernel?
You didn't play around with kernel settings?
Yesterday, Cyanogen posted on their blog that they now have CM12 nightlies for our device and that they are 85% done with the M releases. Source: http://www.cyanogenmod.org/blog/the-l-is-for-lollipop
They are in the process of building and posting the nightlies for shamu. The list on the blog is being built in alphabetical order
At the current speed the nightlies are being built, our device should be available in four hours by now
It's here!!
Yes. Just saw it. Downloading and installing now.
Still not a lot of features implemented. I thought SU was in privacy guard as has been reported and flashed without SuperSu initially and didn't have root. Had to flash again, seems stable but very minimal features thus far
Any idea if they are staying away from being caf based this time
does anyone know if on the official nightlies the Force Encryption is enabled. Also is there a thread for the official CM12 for shamu on xda yet?
A guy told me after flashing his device was encrypted again...
vergilbt said:
A guy told me after flashing his device was encrypted again...
Click to expand...
Click to collapse
Ya I think I knew that, you have to flash a alternate kernel if you want to stay decrypted, I just don't know which kernel is ok to use, I don't know much about kernels.
dkotoric said:
Ya I think I knew that, you have to flash a alternate kernel if you want to stay decrypted, I just don't know which kernel is ok to use, I don't know much about kernels.
Click to expand...
Click to collapse
Most custom kernels will say in OP if they force encryption. If not just search the thread of "encryption" or "decrypted" and you'll find out soon enough
wrongway213 said:
Most custom kernels will say in OP if they force encryption. If not just search the thread of "encryption" or "decrypted" and you'll find out soon enough
Click to expand...
Click to collapse
Ya I know but how do we know if a kernel works with CM12 or not, or do they all that are for nexus 6 work?
dkotoric said:
Ya I know but how do we know if a kernel works with CM12 or not, or do they all that are for nexus 6 work?
Click to expand...
Click to collapse
All the kernels are for aosp/stock as of right now so as long as cm12 hasn't went to caf then they should work fine. So you should be able to try any of the kernels. Only one way to find out make a backup and give it a shot. Worst that would happen is it wouldn't boot.
flyinj54 said:
All the kernels are for aosp/stock as of right now so as long as cm12 hasn't went to caf then they should work fine. So you should be able to try any of the kernels. Only one way to find out make a backup and give it a shot.
Click to expand...
Click to collapse
Ok i'll give it a try, do you know if all I need to do is, flash rom then gapps then kernel and reboot, or do I need to flash superuser as well?
dkotoric said:
Ok i'll give it a try, do you know if all I need to do is, flash rom then gapps then kernel and reboot, or do I need to flash superuser as well?
Click to expand...
Click to collapse
Yes exactly. You shouldn't have to flash supersu as normally cm roms have root built in. But if for some reason it didn't you could always go back into recovery and flash supersu.
flyinj54 said:
Yes exactly. You shouldn't have to flash supersu as normally cm roms have root built in. But if for some reason it didn't you could always go back into recovery and flash supersu.
Click to expand...
Click to collapse
ok cool of I go, am i ok going with franco kernel?
dkotoric said:
ok cool of I go, am i ok going with franco kernel?
Click to expand...
Click to collapse
Sure that will work fine
dkotoric said:
ok cool of I go, am i ok going with franco kernel?
Click to expand...
Click to collapse
On CM12 nightly with Franco's kernel now. All is good.
dkotoric said:
Ok i'll give it a try, do you know if all I need to do is, flash rom then gapps then kernel and reboot, or do I need to flash superuser as well?
Click to expand...
Click to collapse
flyinj54 said:
Yes exactly. You shouldn't have to flash supersu as normally cm roms have root built in. But if for some reason it didn't you could always go back into recovery and flash supersu.
Click to expand...
Click to collapse
CM actually did not come rooted, I had to flash SuperSu.
wrongway213 said:
CM actually did not come rooted, I had to flash SuperSu.
Click to expand...
Click to collapse
it comes rooted I think you only have to flash SuperSU if you flash a alternate kernel, did you flash SuperSU or can we just download superSU from the market?