I'm currently running CM11 (02-07) with ART enabled. I'm thinking of upgrading to the current nightly, but I'm not sure if I need any special steps with ART.
I will be flashing the ROM manually because I need to modify the device number, so I'll probably be doing a reset before, which will of course reset back to Dalvik and remove all my apps.
Now my quesion is, can I backup my apps and user data while in ART with Titanium, and then restore them in Dalvik? I'm thinking of keeping Dalvik so I can flash stock remote and camera.
Thanks,
Vic
Did a Titanium backup, clean install and everything is ok. ART is good, but I'm happy to be able install the remote and camera, and maybe try xposed framework.
victorbrca said:
Did a Titanium backup, clean install and everything is ok. ART is good, but I'm happy to be able install the remote and camera, and maybe try xposed framework.
Click to expand...
Click to collapse
How did you get CM11 to flash on your wind variant g2. When I flash it fails. Its also says no MD5 file found. Please Help.
AndroidNoobeee said:
How did you get CM11 to flash on your wind variant g2. When I flash it fails. Its also says no MD5 file found. Please Help.
Click to expand...
Click to collapse
Here.
http://forum.xda-developers.com/showthread.php?t=2611749
Sent from Tapatalk.
victorbrca said:
Here.
http://forum.xda-developers.com/showthread.php?t=2611749
Sent from Tapatalk.
Click to expand...
Click to collapse
I followed the guide. But when I flash CM it fails. Do need certain kernel or something? What am I doing wrong? Also I have the wind variant if thats important.
AndroidNoobeee said:
I followed the guide. But when I flash CM it fails. Do need certain kernel or something? What am I doing wrong? Also I have the wind variant if thats important.
Click to expand...
Click to collapse
How did you flash recovery?
Sent from Tapatalk.
victorbrca said:
How did you flash recovery?
Sent from Tapatalk.
Click to expand...
Click to collapse
I flashed twrp v2.6.3.2 through flashify. I realize this isn't the most updated version of twrp for my g2 but when i flash the updated vesion (v2.6.3.4) it fails.
AndroidNoobeee said:
I flashed twrp v2.6.3.2 through flashify. I realize this isn't the most updated version of twrp for my g2 but when i flash the updated vesion (v2.6.3.4) it fails.
Click to expand...
Click to collapse
I would go to the thread and ask for help. Also paste the error you get when you try to flash CM11.
Sent from Tapatalk.
victorbrca said:
I would go to the thread and ask for help. Also paste the error you get when you try to flash CM11.
Sent from Tapatalk.
Click to expand...
Click to collapse
I noticed you are using a furnace kernel,Did you flash CM11 with stock lg kernel? If so what version of twrp did you use. I don't understand the problem because I have the dame model as you.
AndroidNoobeee said:
I noticed you are using a furnace kernel,Did you flash CM11 with stock lg kernel? If so what version of twrp did you use. I don't understand the problem because I have the dame model as you.
Click to expand...
Click to collapse
Again, post back at that other thread with the details of what you did and what error you are getting. The more detail you can give the more we can help.
In a nutshell, the recovery that you install will dictate what ROM will work on your device. For some of the ROMs in that thread you will need to install a kernel, but that depends. And I'm not sure what error you are getting.
Sent from Tapatalk.
victorbrca said:
Again, post back at that other thread with the details of what you did and what error you are getting. The more detail you can give the more we can help.
In a nutshell, the recovery that you install will dictate what ROM will work on your device. For some of the ROMs in that thread you will need to install a kernel, but that depends. And I'm not sure what error you are getting.
Sent from Tapatalk.
Click to expand...
Click to collapse
It won't allow me because the thread is only for developers.
Related
Here you go folks. The miui v5 3.11.29 official for HTC ONE is released
http://en.miui.com/download-111.html
For MIUI English Forum
> http://en.miui.com/download-111.html
Harish_Kumar said:
For MIUI English Forum
> http://en.miui.com/download-111.html
Click to expand...
Click to collapse
we still need to install 4.2.2 gapps in this rom.
saketh91 said:
we still need to install 4.2.2 gapps in this rom.
Click to expand...
Click to collapse
Oh you completed installing the rom?
i guess first we need to install the kernal and then flash the rom..right?
this is the first time i am trying an official MIUI rom!
Harish_Kumar said:
Oh you completed installing the rom?
i guess first we need to install the kernal and then flash the rom..right?
this is the first time i am trying an official MIUI rom!
Click to expand...
Click to collapse
I don't know abt the kernel but I am loving this rom so far. No lags, the UI is perfect fit for the screen and loving some features like DND, IR etc..,
but the only thing missing is the gapps. We need to install separately i think. Loving the Internationalized weather widget too.
I get build prop problem, who else got it ?
hth2813 said:
I get build prop problem, who else got it ?
Click to expand...
Click to collapse
you mean while installing?. It installed perfectly for me on TWRP 2.6.3.0
saketh91 said:
you mean while installing?. It installed perfectly fine for me on TWRP 2.6.3.0
Click to expand...
Click to collapse
Yeah, what is your current rom, cid, mid ?
hth2813 said:
Yeah, what is your current rom, cid, mid ?
Click to expand...
Click to collapse
I was using SD v11.1 before and now installed this rom with no issues. Mine has supercid. I still don't understand what you meant abt build prop problem. Where did you get that error? While installing or while modifying the build prop in the rom?
saketh91 said:
I was using SD v11.1 before and now installed this rom with no issues. Mine has supercid. I still don't understand what you meant abt build prop problem. Where did you get that error? While installing or while modifying the build prop in the rom?
Click to expand...
Click to collapse
I got that problem while installing ROM, i am in GPE 4.4
I'm also getting a status 7 getprop error in recovery.
hth2813 said:
I got that problem while installing ROM, i am in GPE 4.4
Click to expand...
Click to collapse
Ok there can be different reasons for this.
1.May be a bad download. Try downloading it again.
2.May be you did not clean flash it by wiping cache,system,data. Try wiping everything except internal storage and try again.
3.May be the recovery you are using doesn't support installing this rom. Try TWRP 2.6.3.0 I got it installed perfectly with that.
4.And finally the firmware which you are on. If it is GPE firmware then try switching to sense before flashing this. I had hell lot of problems with GPE firmware like unlocking the bootloader, installing the roms etc..,
May be these are not the reasons for your problem but just give it a try and report back
Droid69 said:
I'm also getting a status 7 getprop error in recovery.
Click to expand...
Click to collapse
You get status 7 error only in three cases.
1.You edited the updater script in the rom
2.You did not download the rom properly.
3.Mainly you are not using the right recovery. Try using TWRP 2.6.3.0 or higher may be.
saketh91 said:
You get status 7 error only in three cases.
1.You edited the updater script in the rom
2.You did not download the rom properly.
3.Mainly you are not using the right recovery. Try using TWRP 2.6.3.0 or higher may be.
Click to expand...
Click to collapse
1. No
2. Could be a bad download, i will download it again and retry.
3. Im on the latest.
Droid69 said:
1. No
2. Could be a bad download, i will download it again and retry.
3. Im on the latest.
Click to expand...
Click to collapse
ok before you re download just try installing it with TWRP 2.6.3.0 too because i faced some problems earlier with the latest TWRP. Just give a try
saketh91 said:
ok before you re download just try installing it with TWRP 2.6.3.0 too because i faced some problems earlier with the latest TWRP. Just give a try
Click to expand...
Click to collapse
Rom flashed with TWRP 2.6.3.0 thanks.
Ah, i have just tried CWM Recovery and it installed successful
Droid69 said:
Rom flashed with TWRP 2.6.3.0 thanks.
Click to expand...
Click to collapse
Glad you got it installed perfectly!!
hth2813 said:
Ah, i have just tried CWM Recovery and it installed successful
Click to expand...
Click to collapse
Nice to hear that you got it installed perfectly.:laugh:
hth2813 said:
I get build prop problem, who else got it ?
Click to expand...
Click to collapse
yep the same problem
I have been trying to flash CM11 to my G2(Tmo) but the problem I am running into is that no matter what tut I follow I end up with the same result. Fail. I have attached a pic of my screen if that helps. I have TWRP v2.6.3.2 installed and everything but install runs fine. The error that comes up on the install screen is "E:Error executing updater binary in zip '.........'. I am a noob to flashing/roms sorry If more information is needed just let me know.
Thanks.
DireArcticWolf said:
I have been trying to flash CM11 to my G2(Tmo) but the problem I am running into is that no matter what tut I follow I end up with the same result. Fail. I have attached a pic of my screen if that helps. I have TWRP v2.6.3.2 installed and everything but install runs fine. The error that comes up on the install screen is "E:Error executing updater binary in zip '.........'. I am a noob to flashing/roms sorry If more information is needed just let me know.
Thanks.
Click to expand...
Click to collapse
To flash CM11 and most kitkat roms, you'll need to update TWRP. The most up-to-date version for the D801 (T-Mobile G2) is v2.6.3.5, which can be found in the CMB thread under G2 Android Development (T-Mobile): http://forum.xda-developers.com/showthread.php?t=2568732 . The update is a flashable zip, so download it to your phone, reboot to recovery, and install it using your existing TWRP. After a reboot into recovery you should be updated, and you should be able to flash CM11.
thanks
flutterguy317 said:
To flash CM11 and most kitkat roms, you'll need to update TWRP. The most up-to-date version for the D801 (T-Mobile G2) is v2.6.3.5, which can be found in the CMB thread under G2 Android Development (T-Mobile): http://forum.xda-developers.com/showthread.php?t=2568732 . The update is a flashable zip, so download it to your phone, reboot to recovery, and install it using your existing TWRP. After a reboot into recovery you should be updated, and you should be able to flash CM11.
Click to expand...
Click to collapse
Thank you sssoooooo much, after a week of pulling my hair out I am happy to say I now have CM11 on my G2.
flutterguy317 said:
To flash CM11 and most kitkat roms, you'll need to update TWRP. The most up-to-date version for the D801 (T-Mobile G2) is v2.6.3.5, which can be found in the CMB thread under G2 Android Development (T-Mobile): http://forum.xda-developers.com/showthread.php?t=2568732 . The update is a flashable zip, so download it to your phone, reboot to recovery, and install it using your existing TWRP. After a reboot into recovery you should be updated, and you should be able to flash CM11.
Click to expand...
Click to collapse
I'm having a similar problem on my d802. I will go and try. Thank you for this answer!
Sent from my LG-D802 using Tapatalk
Plain Water said:
I'm having a similar problem on my d802. I will go and try. Thank you for this answer!
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
Have the same problem. But cant find out what the newest twrp is. i have now 2.6.3.2. But cant find 2.6.3.5. I found one 2.6.3.3 but when i try to push it just imput file is not a loki image.
Can you please find TWRP version that works with mine g802 and cm11 ?
Thanks
markula78 said:
Have the same problem. But cant find out what the newest twrp is. i have now 2.6.3.2. But cant find 2.6.3.5. I found one 2.6.3.3 but when i try to push it just imput file is not a loki image.
Can you please find TWRP version that works with mine g802 and cm11 ?
Thanks
Click to expand...
Click to collapse
I just download the Freegee app ant updatet to 2.6.3.3 and it work, if any other with LG 802 have problems.
Good to know. Thanks for the post.
Sent from my LG-D801 using XDA Premium 4 mobile app
i'm on CM13 - the latest nightly
Yes you can, just flash the zip. It's not that hard i guess.
xtract1 said:
i'm on CM13 - the latest nightly
Click to expand...
Click to collapse
use the thermal one from blastagator to prevent heating of phone
and what's the deal with f2fs and possible wiping all the data?
cant i juast flash it and thats it?
xtract1 said:
and what's the deal with f2fs and possible wiping all the data?
cant i juast flash it and thats it?
Click to expand...
Click to collapse
not sure what you mean. i have f2fs and it didnt wipe anything. i just flash it ion d800 everything good.
do i have it too?
xtract1 said:
do i have it too?
Click to expand...
Click to collapse
have what ? i don get it? be more specific please.
do not forget that you need KK bootloader if you want to update to 3.0.0.0+ version,flash KK bootloader before you flash twrp 3.0.0+ if your device is still on JB bootloader
ok, everything went fine.
but now, i've tried the Resurrection rom and backed-up the CM13, and when i want to restore it says its read only and i cant, help?
Can any one help me try to get cm11 on my verizon note 3. I have TWRP and Unlocked Bootloader with root running CM13 but I still want to run cm11 and when I tried to flash the rom, it gave me a updater 7 error. If you know a way to fix this please tell me.
lootrooter said:
Can any one help me try to get cm11 on my verizon note 3. I have TWRP and Unlocked Bootloader with root running CM13 but I still want to run cm11 and when I tried to flash the rom, it gave me a updater 7 error. If you know a way to fix this please tell me.
Click to expand...
Click to collapse
Error 7 is typically a mismatch condition between the fingerprint of the recovery in use and the model of the phone the ROM is intended for - the ROM author puts an "assert" statement in the installer script to prevent dummies from flashing a ROM from the wrong device to a phone.
Assuming you didn't make a mistake downloading the wrong cm rom for the SM-N900V Note 3 this could be a "hlte" vs "hltevzw" issue depending on which TWRP version you have installed.
You can work around this by unpacking the ROM .zip file, deleting the offending "assert" line in the installer script, and red zipping the ROM.
bftb0 said:
Error 7 is typically a mismatch condition between the fingerprint of the recovery in use and the model of the phone the ROM is intended for - the ROM author puts an "assert" statement in the installer script to prevent dummies from flashing a ROM from the wrong device to a phone.
Assuming you didn't make a mistake downloading the wrong cm rom for the SM-N900V Note 3 this could be a "hlte" vs "hltevzw" issue depending on which TWRP version you have installed.
You can work around this by unpacking the ROM .zip file, deleting the offending "assert" line in the installer script, and red zipping the ROM.
Click to expand...
Click to collapse
It was just a "hlte" vs "hltevzw" error, thanks
Did you get CM11 working?
Sent from my SM-N900V using Tapatalk
Old 4.4 rom on new vzw bootloader
bishop0114 said:
Did you get CM11 working?
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
I did and c-rom. Which i love. But with both of them lte data goes in and out. I've tried a bunch of things but can't figure it out. It's weird editing apns causes them to be deleted. Any ideas anyone?
how to install
themrgoats said:
I did and c-rom. Which i love. But with both of them lte data goes in and out. I've tried a bunch of things but can't figure it out. It's weird editing apns causes them to be deleted. Any ideas anyone?
Click to expand...
Click to collapse
can tell me how did u installed it? i am getting ERROR : 7 in TWRP , cm-11-20160612-NIGHTLY-hltevzw.zip (223.82 MB)
Rooted 0B6 then Unlocked Bootloader.
dat ka said:
can tell me how did u installed it? i am getting ERROR : 7 in TWRP , cm-11-20160612-NIGHTLY-hltevzw.zip (223.82 MB)
Rooted 0B6 then Unlocked Bootloader.
Click to expand...
Click to collapse
TWRP error 7 typically means you're trying to install the zip onto the wrong device.
Sent from my SM-N900V using Tapatalk
Yes if you are using the hltevzw twrp then just flash the hlte generic twrp and u can flash roms that don't require the hltevzw twrp to see the right rom is version is being flashed.
One more question , i am running JasmineRom its 5.0.x CM 11 is 4.x.x Will it work? if i install it?
dat ka said:
One more question , i am running JasmineRom its 5.0.x CM 11 is 4.x.x Will it work? if i install it?
Click to expand...
Click to collapse
I don't think so but was wondering since we have an unlocked bootloader, can we downgrade to a developer 4.4.2 rom and then install the cm11?
Sent from my SM-N900V using Tapatalk
Hi there.
Is anyone here using TWRP 3.x? I'm still on 2.x, since I read of lots of problems with newer versions of the recovery on this device, but I'd like to upgrade now. Can anyone give me some feedback?
Thanks in advance
It works but as with multiple posts not with Aroma.
Sent from my SM-N930F using XDA-Developers mobile app
I see no reason to update if u have no issue on 2.x. sometimes upgrade is just a no go.
totalnoob34 said:
Hi there.
Is anyone here using TWRP 3.x? I'm still on 2.x, since I read of lots of problems with newer versions of the recovery on this device, but I'd like to upgrade now. Can anyone give me some feedback?
Thanks in advance
Click to expand...
Click to collapse
everything will go fine. It is safe. But say goodbye to aroma
JJEgan said:
It works but as with multiple posts not with Aroma.
Click to expand...
Click to collapse
techdude18 said:
everything will go fine. It is safe. But say goodbye to aroma
Click to expand...
Click to collapse
Derp, must've missed that. I'll obviously stick with 2.x, then.
totalnoob34 said:
Hi there.
Is anyone here using TWRP 3.x? I'm still on 2.x, since I read of lots of problems with newer versions of the recovery on this device, but I'd like to upgrade now. Can anyone give me some feedback?
Thanks in advance
Click to expand...
Click to collapse
Try it.. It totally a new design You can revert back, if you don't like it.. By flashing the image through the new twrp itself.
Sent from my Xiaomi Mi 5 using XDA Labs
harish15 said:
Try it.. It totally a new design You can revert back, if you don't like it.. By flashing the image through the new twrp itself.
Sent from my Xiaomi Mi 5 using XDA Labs
Click to expand...
Click to collapse
How can this be possible? Can you post a tutorial about downgrade TWRP? Many thanks.
ociortan said:
How can this be possible? Can you post a tutorial about downgrade TWRP? Many thanks.
Click to expand...
Click to collapse
Just flash the preferred twrp image through Image flashing in install option
harish15 said:
Just flash the preferred twrp image through Image flashing in install option
Click to expand...
Click to collapse
Dude, I'm a noob here, could you please tell me step by step where and what to put? Many thanks
ociortan said:
Dude, I'm a noob here, could you please tell me step by step where and what to put? Many thanks
Click to expand...
Click to collapse
Google, twrp site, read instructions !
ociortan said:
Dude, I'm a noob here, could you please tell me step by step where and what to put? Many thanks
Click to expand...
Click to collapse
If you're trying to downgrade, it means that you've flashed TWRP.
If you've flashed TWRP, it means that you already know how to flash a custom recovery.
If you already know how to flash a custom recovery, then this is EXACTLY the same thing. Just pick an older version of TWRP and flash it the exact same way you would flash any version of TWRP.
And if you don't even know how to do that, google is your friend.
ShaDisNX255 said:
If you're trying to downgrade, it means that you've flashed TWRP.
If you've flashed TWRP, it means that you already know how to flash a custom recovery.
If you already know how to flash a custom recovery, then this is EXACTLY the same thing. Just pick an older version of TWRP and flash it the exact same way you would flash any version of TWRP.
And if you don't even know how to do that, google is your friend.
Click to expand...
Click to collapse
I DID IT!!! he he, I flashed the img. with recovery and it worked. Thank you guys :good:
Try your luck on Googling.. If you still need assistance. PM anytime.. Happy to help