Yesterday, Cyanogen posted on their blog that they now have CM12 nightlies for our device and that they are 85% done with the M releases. Source: http://www.cyanogenmod.org/blog/the-l-is-for-lollipop
They are in the process of building and posting the nightlies for shamu. The list on the blog is being built in alphabetical order
At the current speed the nightlies are being built, our device should be available in four hours by now
It's here!!
Yes. Just saw it. Downloading and installing now.
Still not a lot of features implemented. I thought SU was in privacy guard as has been reported and flashed without SuperSu initially and didn't have root. Had to flash again, seems stable but very minimal features thus far
Any idea if they are staying away from being caf based this time
does anyone know if on the official nightlies the Force Encryption is enabled. Also is there a thread for the official CM12 for shamu on xda yet?
A guy told me after flashing his device was encrypted again...
vergilbt said:
A guy told me after flashing his device was encrypted again...
Click to expand...
Click to collapse
Ya I think I knew that, you have to flash a alternate kernel if you want to stay decrypted, I just don't know which kernel is ok to use, I don't know much about kernels.
dkotoric said:
Ya I think I knew that, you have to flash a alternate kernel if you want to stay decrypted, I just don't know which kernel is ok to use, I don't know much about kernels.
Click to expand...
Click to collapse
Most custom kernels will say in OP if they force encryption. If not just search the thread of "encryption" or "decrypted" and you'll find out soon enough
wrongway213 said:
Most custom kernels will say in OP if they force encryption. If not just search the thread of "encryption" or "decrypted" and you'll find out soon enough
Click to expand...
Click to collapse
Ya I know but how do we know if a kernel works with CM12 or not, or do they all that are for nexus 6 work?
dkotoric said:
Ya I know but how do we know if a kernel works with CM12 or not, or do they all that are for nexus 6 work?
Click to expand...
Click to collapse
All the kernels are for aosp/stock as of right now so as long as cm12 hasn't went to caf then they should work fine. So you should be able to try any of the kernels. Only one way to find out make a backup and give it a shot. Worst that would happen is it wouldn't boot.
flyinj54 said:
All the kernels are for aosp/stock as of right now so as long as cm12 hasn't went to caf then they should work fine. So you should be able to try any of the kernels. Only one way to find out make a backup and give it a shot.
Click to expand...
Click to collapse
Ok i'll give it a try, do you know if all I need to do is, flash rom then gapps then kernel and reboot, or do I need to flash superuser as well?
dkotoric said:
Ok i'll give it a try, do you know if all I need to do is, flash rom then gapps then kernel and reboot, or do I need to flash superuser as well?
Click to expand...
Click to collapse
Yes exactly. You shouldn't have to flash supersu as normally cm roms have root built in. But if for some reason it didn't you could always go back into recovery and flash supersu.
flyinj54 said:
Yes exactly. You shouldn't have to flash supersu as normally cm roms have root built in. But if for some reason it didn't you could always go back into recovery and flash supersu.
Click to expand...
Click to collapse
ok cool of I go, am i ok going with franco kernel?
dkotoric said:
ok cool of I go, am i ok going with franco kernel?
Click to expand...
Click to collapse
Sure that will work fine
dkotoric said:
ok cool of I go, am i ok going with franco kernel?
Click to expand...
Click to collapse
On CM12 nightly with Franco's kernel now. All is good.
dkotoric said:
Ok i'll give it a try, do you know if all I need to do is, flash rom then gapps then kernel and reboot, or do I need to flash superuser as well?
Click to expand...
Click to collapse
flyinj54 said:
Yes exactly. You shouldn't have to flash supersu as normally cm roms have root built in. But if for some reason it didn't you could always go back into recovery and flash supersu.
Click to expand...
Click to collapse
CM actually did not come rooted, I had to flash SuperSu.
wrongway213 said:
CM actually did not come rooted, I had to flash SuperSu.
Click to expand...
Click to collapse
it comes rooted I think you only have to flash SuperSU if you flash a alternate kernel, did you flash SuperSU or can we just download superSU from the market?
Related
Hi I just got my hands on this tablet. I already rooted it but I want aosp. So is there twrp and cm support for this? It's a nook tab 4 10.1.
mojorisin7178 said:
Hi I just got my hands on this tablet. I already rooted it but I want aosp. So is there twrp and cm support for this? It's a nook tab 4 10.1.
Click to expand...
Click to collapse
You already found the correct twrp, here's the best version of cm12 (lollipop): http://forum.xda-developers.com/tab-4/development/rom-blisspop-3-1-t3084757
Here's cm13 (marshmallow) it's still a little rough around the edges but it's stable enough to be my daily driver: http://forum.xda-developers.com/tab-4/development/rom-slimrom-5-0-1-alpha-0-7-t2963906
I also have the t530nu and can confirm everything I linked to is working. Just make sure your tablet is on lollipop before flashing any ROMs or else they won't work. If your tablet hasn't been updated to lollipop yet, I have the stock Odin firmware you'll need in my thread here: http://forum.xda-developers.com/tab-4/general/links-galaxy-tab-4-official-lollipop-5-t3102844
Thank you sir I appreciate the advice. Do you know if I can install twrp using mobile.odin ? My PC is down right.now windows 10 is giving me a.hard time. That is my next project to tackle.
mojorisin7178 said:
Thank you sir I appreciate the advice. Do you know if I can install twrp using mobile.odin ? My PC is down right.now windows 10 is giving me a.hard time. That is my next project to tackle.
Click to expand...
Click to collapse
Idk about mobile Odin, but an app I guarantee will work is Flashify, I used it to install twrp on my t530nu:
https://play.google.com/store/apps/details?id=com.cgollner.flashify&hl=en
Yeah I just saw that you posted it in the other thread thank you.
mojorisin7178 said:
Yeah I just saw that you posted it in the other thread thank you.
Click to expand...
Click to collapse
If you end up using cm13, install the latest SuperSU zip when you install the ROM and I've had better results with the 11-13 build than the 11-16 build. No need to flash the supersu zip if you use cm12 (BlissPop), it does that step automatically
thisisapoorusernamechoice said:
If you end up using cm13, install the latest SuperSU zip when you install the ROM and I've had better results with the 11-13 build than the 11-16 build. No need to flash the supersu zip if you use cm12 (BlissPop), it does that step automatically
Click to expand...
Click to collapse
Yeah I'm using cm 12 because I know it is stable. I'll wait for all the bugs to work out of marshmellow. Besides I using cm 12 on my note 2 and the phone is 2 years old and runs like a champ. And I thought you don't really
Need a superuser app on cm isn't it build right in the privacy settings? I know it is for the note 2 and s5. Oh and also which twrp do I download there are a few in the list I downloaded the last one and it comes up as a .tar not .img?
mojorisin7178 said:
Yeah I'm using cm 12 because I know it is stable. I'll wait for all the bugs to work out of marshmellow. Besides I using cm 12 on my note 2 and the phone is 2 years old and runs like a champ. And I thought you don't really
Need a superuser app on cm isn't it build right in the privacy settings? I know it is for the note 2 and s5. Oh and also which twrp do I download there are a few in the list I downloaded the last one and it comes up as a .tar not .img?
Click to expand...
Click to collapse
TWRP .img file for Flashify http://android.comtek-wiebe.de/OpenRecovery/TWRP-2.8.7.0-SM-T5XX-150901_matisse_wifi_3g_lte.img
mojorisin7178 said:
And I thought you don't really
Need a superuser app on cm isn't it build right in the privacy settings? I know it is for the note 2 and s5
Click to expand...
Click to collapse
Yeah it is but the BlissPop I linked to has chainfire's supersu app built in since it works better with certain apps on lollipop. You don't have to worry about it, the rom installation takes care of it for you
Hey guys,
i have custom rom nexus pure
and i want to install franco kernel.
do i need to do somthing special before the install?
like wipe?
and another thing,in the post about the kernel it explain what to do according to your current verison of the kernel
"
If you're on a 100% stock device (stock rom + stock Kernel) or already on r8 or newer disregard the messages below and just flash - if not:
* If you're on stock rom + r7, or older, you should be flashing stock boot.img first, then r8, or newer;
* If you're on a custom rom + r7, or older, you should dirty flash the rom (or extract its boot.img and fastboot flash it) and then r8, or newer;
"
and i have just custom rom and havent the kernel so im not sure what to do.
thank you for helping
Are you with your custom rom kernel ?
If yes, then just flash fk and root (if you want to).
Profit
kauemelhado said:
Are you with your custom rom kernel ?
If yes, then just flash fk and root (if you want to).
Profit
Click to expand...
Click to collapse
thanks for the asnwer
i just switch to this rom i havent changed kernel or somthing so yes i guess im with my custom rom kernel
and i have already has root
so just download the zip and flash it?
Hmm, I guess just flash it.
I'd flash:
-unsu (unroot)
-fk r10
-supersu
Roy_Alter said:
thanks for the asnwer
i just switch to this rom i havent changed kernel or somthing so yes i guess im with my custom rom kernel
and i have already has root
so just download the zip and flash it?
Click to expand...
Click to collapse
kauemelhado said:
Hmm, I guess just flash it.
I'd flash:
-unsu (unroot)
-fk r10
-supersu
Click to expand...
Click to collapse
In your case, just flash FK r10. No need to flash SuperSU, Pure Nexus is pre-rooted.
Sent from my Nexus 5X using Tapatalk
if you took 2 minutes to read the installation intructions for the Pure Nexus ROM, you wouldve had your answer.
Soulfly3 said:
if you took 2 minutes to read the installation intructions for the Pure Nexus ROM, you wouldve had your answer.
Click to expand...
Click to collapse
where there are installation intructions for the Pure Nexus ROM??
Roy_Alter said:
where there are installation intructions for the Pure Nexus ROM??
Click to expand...
Click to collapse
In the first posts of the thread, where they always are
http://goo.gl/Sn5J4V
Soulfly3 said:
In the first posts of the thread, where they always are
http://goo.gl/Sn5J4V
Click to expand...
Click to collapse
where it say something about install kernel?
ive checked and found nothing
Roy_Alter said:
where it say something about install kernel?
ive checked and found nothing
Click to expand...
Click to collapse
my goodness... I literally have to spoonfeed you the information? I've given you absolutely everything you need to find the info and learn how to install it yourself.
Click either install instruction (dirty or clean) and READ.
Soulfly3 said:
my goodness... I literally have to spoonfeed you the information? I've given you absolutely everything you need to find the info and learn how to install it yourself.
Click either install instruction (dirty or clean) and READ.
Click to expand...
Click to collapse
so you mean that i need to do these steps
1a. Download the latest Pure Nexus zip (pay attention to the version you choose) and your custom kernel if you have one onto your phone.
1b. If you are on the CMTE variant, it is a good idea to set your theme back to stock before dirty flashing. If you don’t and your theme looks wonky after flashing, try using this app.
2. Boot into TWRP and make a backup (remove any lock screen security before this, optional but HIGHLY recommended).
3. Wipe cache and dalvik cache (optional).
4. Flash Pure Nexus zip.
5. Update your vendor image (only need to do this once per build number).
6. Flash your custom kernel (optional).
7. Reboot and profit.
just with the kernel zip?
and if the answer is yes i need to update the vendor image again? i already did it when i install the rom.
thank for the help man it mean to me alot
No. all you need to do is go into twrp and install the kernel
THose are the install insructions for when you update the rom either via dirty or clean.
since you already have the ROM installed, just install the kernel in twrp and reboot.
Soulfly3 said:
No. all you need to do is go into twrp and install the kernel
THose are the install insructions for when you update the rom either via dirty or clean.
since you already have the ROM installed, just install the kernel in twrp and reboot.
Click to expand...
Click to collapse
ok thank you
Finnaly Cyanogen OS released his Marshmallow for Oneplus ONE
You guys can download here
Presentation Movie by @kawaii_bacon
You can flash this zip or you can install "Cyanogen Update Tracker" from playstore
IMPORTANT: This is INCREMENTAL/Update OTA so be sure you have 100% stock COS YOG7DAS2K1without Root with stock recovery before flash.
Have fun
I'd love to hear from anyone who was previously on a CM13 ROM and then installed COS13. Do you notice any performance differences? Any notable user-facing features in COS13 that are not present in CM13? Basically is there any real reason for people like me to go back to stock and get this update?
I should mention that I am running the latest build of Sultanxda's CM13 ROM (0404).
megatomic said:
I'd love to hear from anyone who was previously on a CM13 ROM and then installed COS13. Do you notice any performance differences? Any notable user-facing features in COS13 that are not present in CM13? Basically is there any real reason for people like me to go back to stock and get this update?
I should mention that I am running the latest build of Sultanxda's CM13 ROM (0404).
Click to expand...
Click to collapse
I forget to mention that I didn't test it. OP updated
but this is without MOD .... Why?
That is one sketchy link in the OP. Here's the official download link: http://builds.cyngn.com/incremental/bacon/cm-bacon-cee4e8702d-to-e36dd78050-signed.zip
I've downloaded it & tried.But no luck.. TWRP show an error "this device has 5.1.1 user key"..But im already on custom 6.1.1
crazykas said:
I've downloaded it & tried.But no luck.. TWRP show an error "this device has 5.1.1 user key"..But im already on custom 6.1.1
Click to expand...
Click to collapse
Your phone needs to be 100% stock YOG7DAS2K1 if you want to sideload the OTA.
Ahhh screw it, I'm going to do it. I'll be back with my observations.
mekanismen said:
That is one sketchy link in the OP. Here's the official download link: http://builds.cyngn.com/incremental/bacon/cm-bacon-cee4e8702d-to-e36dd78050-signed.zip
Click to expand...
Click to collapse
Link updated, thanks :good:
Good evening everyone!!
My oneplus has Resurection Remix Marshmallow.
For install I flash with twrp cm-12.1-YOG7DAS2K1-bacon-signed-d347503447.zip?
Jjul said:
Good evening everyone!!
My oneplus has Resurection Remix Marshmallow.
For install I flash with twrp cm-12.1-YOG7DAS2K1-bacon-signed-d347503447.zip?
Click to expand...
Click to collapse
Read red letters in OP
Jjul said:
Good evening everyone!!
My oneplus has Resurection Remix Marshmallow.
For install I flash with twrp cm-12.1-YOG7DAS2K1-bacon-signed-d347503447.zip?
Click to expand...
Click to collapse
In cm-12.1-YOG7DAS2K1-bacon-signed-d347503447.zip is there the recovery to?
Jjul said:
In cm-12.1-YOG7DAS2K1-bacon-signed-d347503447.zip is there the recovery to?
Click to expand...
Click to collapse
No
mekanismen said:
Your phone needs to be 100% stock YOG7DAS2K1 if you want to sideload the OTA.
Click to expand...
Click to collapse
well tried that too..But didn't work
crazykas said:
well tried that too..But didn't work
Click to expand...
Click to collapse
Flash an older version of 12.1 (not the latest 12.1.1), let it update to the latest 12.1.1, then manually update the ota to 13... Or edit the updater script to skip checks for release keys..
Setting.Out said:
Flash an older version of 12.1 (not the latest 12.1.1), let it update to the latest 12.1.1, then manually update the ota to 13... Or edit the updater script to skip checks for release keys..
Click to expand...
Click to collapse
i dont know how to edit update script to skip release key verification
crazykas said:
i dont know how to edit update script to skip release key verification
Click to expand...
Click to collapse
Then try the first option..
Running really really good so smooth
Sent from my A0001 using Tapatalk
onyone can create zip for twrp?
Just finished setting up my phone after a complete clean flash (fastboot 12.1.1 + sideloading the update) and I gotta say that it feels really snappy so far. Noticed some new strange included apps, Instagram Content, Twitter Content and Discovery. I guess the Instagram and Twitter apps have something to do with the lock screen, but I've disabled them. I have no idea what Discovery does, so if anyone has a guess I'd love to hear it.
The most interesting thing will be battery life, but my verdict on that will have to wait until I've tested it for a couple of days.
Hey,
first sorry for my bad english and I hope you understand what I want to say.
I have flash my OnePlus2 full stock with fastboot and other methods and the phone starts normaly.
But I want use Paranoid Android and if I install Paranoid Android I have a bootloop. (I waited hours..)
I tried with follow recoveries:
Firmware Switch Zip
HybridRecovery from XDA Forum
Official TWRP for OnePlus 2
I have wiped all (flashed stock firmware)
I tried to install CyanogenMod 13 for OnePlus 2 and this doesnt work too.
I hope anyone can help me :c
Greetz
Mike
Have you tried this: http://forum.xda-developers.com/oneplus-2/general/recovery-teamwin-recovery-project-3-0-0-t3310713
lilbluemirage said:
Have you tried this: http://forum.xda-developers.com/oneplus-2/general/recovery-teamwin-recovery-project-3-0-0-t3310713
Click to expand...
Click to collapse
Isnt this only for "H2OS based Marshmallow ROMs"?
mansster said:
Isnt this only for "H2OS based Marshmallow ROMs"?
Click to expand...
Click to collapse
Nope. Works for OS3 too. I believe the firmware is what's causing your bootloops. give it a shot.
lilbluemirage said:
Nope. Works for OS3 too. I believe the firmware is what's causing your bootloops. give it a shot.
Click to expand...
Click to collapse
But I want use Paranoid Android and this firmware works not with CM
mansster said:
But I want use Paranoid Android and this firmware works not with CM
Click to expand...
Click to collapse
I understand you want PA, but your firmware needs to be MM firmware. So you can either flash that or flash the official OS3 first then flash PA.
https://forums.oneplus.net/threads/official-paranoid-android-op2-instructions.449241/
lilbluemirage said:
I understand you want PA, but your firmware needs to be MM firmware. So you can either flash that or flash the official OS3 first then flash PA.
https://forums.oneplus.net/threads/official-paranoid-android-op2-instructions.449241/
Click to expand...
Click to collapse
I want PA and I have official OOS3 at the moment.
I have installed the SWITCH to MM Recovery, but it doesnt work :/
Last thing i can think of is possibly a bad download.... Sorry i wasn't much help..
lilbluemirage said:
Last thing i can think of is possibly a bad download.... Sorry i wasn't much help..
Click to expand...
Click to collapse
No problem, I hope anyone can help me
There she be. Flash with TWRP.
https://www.androidfilehost.com/?fid=889764386195922277
By popular demand, here are just the modems: https://www.androidfilehost.com/?fid=745425885120733904
And here is just boot.img: https://www.androidfilehost.com/?fid=817550096634771277
TheSt33v said:
There she be. Flash with TWRP.
https://mega.nz/#!WxpxFDDT!wLvfO7kZmYeGM5Ln4uYRq4CBqxGG0Worv9S4sATWF5k
Click to expand...
Click to collapse
could you please upload kernel and baseband only?
i've limited internet connection right now ... the whole rom will seem take forever to be downloaded right now #hammer
thanks anyway
3Dota said:
could you please upload kernel and baseband only?
i've limited internet connection right now ... the whole rom will seem take forever to be downloaded right now #hammer
thanks anyway
Click to expand...
Click to collapse
Sure. Work will be slow today so I'll probably be able to find some time.
Will work with ComputerFreak's tweaked stock Marshmallow? That is, if it's a system patch, and not the whole ROM.
Einsteindks said:
Will work with ComputerFreak's tweaked stock Marshmallow? That is, if it's a system patch, and not the whole ROM.
Click to expand...
Click to collapse
If you flash this, it will erase whatever rom you currently have installed. The TWRP package contains the whole rom.
Are you asking if the OTA is compatible with it? I doubt it. I had a stock-ish setup that only had updated emojis, and the update failed on it.
3Dota said:
could you please upload kernel and baseband only?
i've limited internet connection right now ... the whole rom will seem take forever to be downloaded right now #hammer
thanks anyway
Click to expand...
Click to collapse
Check the OP
TheSt33v said:
Check the OP
Click to expand...
Click to collapse
thanks ... downloading now ...
Still use the beta SU to get root, presumably?
Einsteindks said:
Still use the beta SU to get root, presumably?
Click to expand...
Click to collapse
I would imagine so. I stay unrooted nowadays, but flashing the beta before whatever more recent version you want certainly couldn't hurt.
TheSt33v said:
I would imagine so. I stay unrooted nowadays, but flashing the beta before whatever more recent version you want certainly couldn't hurt.
Click to expand...
Click to collapse
error when flashing 2nd file (radio and kernel) ... flash aborted ...
the file seems ok (no error when test it on notebook)
any suggestions?
3Dota said:
error when flashing 2nd file (radio and kernel) ... flash aborted ...
the file seems ok (no error when test it on notebook)
any suggestions?
Click to expand...
Click to collapse
What version of TWRP are you using? The was a version that had trouble flashing modem images.
3Dota said:
error when flashing 2nd file (radio and kernel) ... flash aborted ...
the file seems ok (no error when test it on notebook)
any suggestions?
Click to expand...
Click to collapse
As I remember, the ROM has to be started, allowed to settle, then go back into TWRP and flash beta SU by itself.
TheSt33v said:
What version of TWRP are you using? The was a version that had trouble flashing modem images.
Click to expand...
Click to collapse
using 3.0.2
Einsteindks said:
As I remember, the ROM has to be started, allowed to settle, then go back into TWRP and flash beta SU by itself.
Click to expand...
Click to collapse
I'm not flashing the whole rom ... just 2nd zip
3Dota said:
using 3.0.2
I'm not flashing the whole rom ... just 2nd zip
Click to expand...
Click to collapse
Update to 3.0.3 mod 3 and try again
TheSt33v said:
Update to 3.0.3 mod 3 and try again
Click to expand...
Click to collapse
still no go ... error : 6
3Dota said:
still no go ... error : 6
Click to expand...
Click to collapse
Hmm. Sorry about that. I just got home. I'll get it sorted out right now
3Dota said:
still no go ... error : 6
Click to expand...
Click to collapse
Try the new one I just uploaded. Should be fixed.
Has anyone flash this new modem on the Droid Turbo xt1254 Resurrection Remix of bhb27 's?
Bumpn gums from my vzw DROID Turbo xt1254
works fine with BHb27 kernel and Crdroid Rom! Thanks
Flashed the kernel & modem to CFs tweaked stock via TWRP 3020. Got no wifi, network is fine. Any thoughts?