Hey,
first sorry for my bad english and I hope you understand what I want to say.
I have flash my OnePlus2 full stock with fastboot and other methods and the phone starts normaly.
But I want use Paranoid Android and if I install Paranoid Android I have a bootloop. (I waited hours..)
I tried with follow recoveries:
Firmware Switch Zip
HybridRecovery from XDA Forum
Official TWRP for OnePlus 2
I have wiped all (flashed stock firmware)
I tried to install CyanogenMod 13 for OnePlus 2 and this doesnt work too.
I hope anyone can help me :c
Greetz
Mike
Have you tried this: http://forum.xda-developers.com/oneplus-2/general/recovery-teamwin-recovery-project-3-0-0-t3310713
lilbluemirage said:
Have you tried this: http://forum.xda-developers.com/oneplus-2/general/recovery-teamwin-recovery-project-3-0-0-t3310713
Click to expand...
Click to collapse
Isnt this only for "H2OS based Marshmallow ROMs"?
mansster said:
Isnt this only for "H2OS based Marshmallow ROMs"?
Click to expand...
Click to collapse
Nope. Works for OS3 too. I believe the firmware is what's causing your bootloops. give it a shot.
lilbluemirage said:
Nope. Works for OS3 too. I believe the firmware is what's causing your bootloops. give it a shot.
Click to expand...
Click to collapse
But I want use Paranoid Android and this firmware works not with CM
mansster said:
But I want use Paranoid Android and this firmware works not with CM
Click to expand...
Click to collapse
I understand you want PA, but your firmware needs to be MM firmware. So you can either flash that or flash the official OS3 first then flash PA.
https://forums.oneplus.net/threads/official-paranoid-android-op2-instructions.449241/
lilbluemirage said:
I understand you want PA, but your firmware needs to be MM firmware. So you can either flash that or flash the official OS3 first then flash PA.
https://forums.oneplus.net/threads/official-paranoid-android-op2-instructions.449241/
Click to expand...
Click to collapse
I want PA and I have official OOS3 at the moment.
I have installed the SWITCH to MM Recovery, but it doesnt work :/
Last thing i can think of is possibly a bad download.... Sorry i wasn't much help..
lilbluemirage said:
Last thing i can think of is possibly a bad download.... Sorry i wasn't much help..
Click to expand...
Click to collapse
No problem, I hope anyone can help me
Related
Here you go folks. The miui v5 3.11.29 official for HTC ONE is released
http://en.miui.com/download-111.html
For MIUI English Forum
> http://en.miui.com/download-111.html
Harish_Kumar said:
For MIUI English Forum
> http://en.miui.com/download-111.html
Click to expand...
Click to collapse
we still need to install 4.2.2 gapps in this rom.
saketh91 said:
we still need to install 4.2.2 gapps in this rom.
Click to expand...
Click to collapse
Oh you completed installing the rom?
i guess first we need to install the kernal and then flash the rom..right?
this is the first time i am trying an official MIUI rom!
Harish_Kumar said:
Oh you completed installing the rom?
i guess first we need to install the kernal and then flash the rom..right?
this is the first time i am trying an official MIUI rom!
Click to expand...
Click to collapse
I don't know abt the kernel but I am loving this rom so far. No lags, the UI is perfect fit for the screen and loving some features like DND, IR etc..,
but the only thing missing is the gapps. We need to install separately i think. Loving the Internationalized weather widget too.
I get build prop problem, who else got it ?
hth2813 said:
I get build prop problem, who else got it ?
Click to expand...
Click to collapse
you mean while installing?. It installed perfectly for me on TWRP 2.6.3.0
saketh91 said:
you mean while installing?. It installed perfectly fine for me on TWRP 2.6.3.0
Click to expand...
Click to collapse
Yeah, what is your current rom, cid, mid ?
hth2813 said:
Yeah, what is your current rom, cid, mid ?
Click to expand...
Click to collapse
I was using SD v11.1 before and now installed this rom with no issues. Mine has supercid. I still don't understand what you meant abt build prop problem. Where did you get that error? While installing or while modifying the build prop in the rom?
saketh91 said:
I was using SD v11.1 before and now installed this rom with no issues. Mine has supercid. I still don't understand what you meant abt build prop problem. Where did you get that error? While installing or while modifying the build prop in the rom?
Click to expand...
Click to collapse
I got that problem while installing ROM, i am in GPE 4.4
I'm also getting a status 7 getprop error in recovery.
hth2813 said:
I got that problem while installing ROM, i am in GPE 4.4
Click to expand...
Click to collapse
Ok there can be different reasons for this.
1.May be a bad download. Try downloading it again.
2.May be you did not clean flash it by wiping cache,system,data. Try wiping everything except internal storage and try again.
3.May be the recovery you are using doesn't support installing this rom. Try TWRP 2.6.3.0 I got it installed perfectly with that.
4.And finally the firmware which you are on. If it is GPE firmware then try switching to sense before flashing this. I had hell lot of problems with GPE firmware like unlocking the bootloader, installing the roms etc..,
May be these are not the reasons for your problem but just give it a try and report back
Droid69 said:
I'm also getting a status 7 getprop error in recovery.
Click to expand...
Click to collapse
You get status 7 error only in three cases.
1.You edited the updater script in the rom
2.You did not download the rom properly.
3.Mainly you are not using the right recovery. Try using TWRP 2.6.3.0 or higher may be.
saketh91 said:
You get status 7 error only in three cases.
1.You edited the updater script in the rom
2.You did not download the rom properly.
3.Mainly you are not using the right recovery. Try using TWRP 2.6.3.0 or higher may be.
Click to expand...
Click to collapse
1. No
2. Could be a bad download, i will download it again and retry.
3. Im on the latest.
Droid69 said:
1. No
2. Could be a bad download, i will download it again and retry.
3. Im on the latest.
Click to expand...
Click to collapse
ok before you re download just try installing it with TWRP 2.6.3.0 too because i faced some problems earlier with the latest TWRP. Just give a try
saketh91 said:
ok before you re download just try installing it with TWRP 2.6.3.0 too because i faced some problems earlier with the latest TWRP. Just give a try
Click to expand...
Click to collapse
Rom flashed with TWRP 2.6.3.0 thanks.
Ah, i have just tried CWM Recovery and it installed successful
Droid69 said:
Rom flashed with TWRP 2.6.3.0 thanks.
Click to expand...
Click to collapse
Glad you got it installed perfectly!!
hth2813 said:
Ah, i have just tried CWM Recovery and it installed successful
Click to expand...
Click to collapse
Nice to hear that you got it installed perfectly.:laugh:
hth2813 said:
I get build prop problem, who else got it ?
Click to expand...
Click to collapse
yep the same problem
Hey everyone little confused here, im looking to install a kitkat rom on my VS980 , yes yes i know why would i wanna go 2 android versions back? Just my cup of tea i guess. Anyways whenever i try to flash kitkat roms such as CM11,SlimKat,LiquidSmooth, etc it fails to install? Ive used bootloader changer and tried all of the bootloaders to no avail. Im on kitkat bootloader as we speak and i have paranoid android lollipop on it, since thats all i could get to work. If you need more info , i shall provide it.
secandRRe said:
Hey everyone little confused here, im looking to install a kitkat rom on my VS980 , yes yes i know why would i wanna go 2 android versions back? Just my cup of tea i guess. Anyways whenever i try to flash kitkat roms such as CM11,SlimKat,LiquidSmooth, etc it fails to install? Ive used bootloader changer and tried all of the bootloaders to no avail. Im on kitkat bootloader as we speak and i have paranoid android lollipop on it, since thats all i could get to work. If you need more info , i shall provide it.
Click to expand...
Click to collapse
Try flashing stock 4.4 kitkat firmware and root it and install recovery and then try to flash
rdlegy said:
Try flashing stock 4.4 kitkat firmware and root it and install recovery and then try to flash
Click to expand...
Click to collapse
How would i go about doing that?
secandRRe said:
How would i go about doing that?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2432476
raptorddd said:
http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
ok i did all of that , but it sat at checking md5, seemed to have flashed cause it said successsful but nope just getting a bootloop. im back to lg rom :crying:
secandRRe said:
ok i did all of that , but it sat at checking md5, seemed to have flashed cause it said successsful but nope just getting a bootloop. im back to lg rom :crying:
Click to expand...
Click to collapse
UPDATE: getting black screen now when trying to flash cm13? not sure why
updated recovery was to get cm13 to work but no luck on kitkat roms
secandRRe said:
updated recovery was to get cm13 to work but no luck on kitkat roms
Click to expand...
Click to collapse
did you flashed hybrid bootstacks for cm13.?
install and then reboot into recovery not system then flash rom gapps
http://forum.xda-developers.com/lg-g2/development/boot-g2-hybrid-bootstacks-t3183219
raptorddd said:
did you flashed hybrid bootstacks for cm13.?
install and then reboot into recovery not system then flash rom gapps
http://forum.xda-developers.com/lg-g2/development/boot-g2-hybrid-bootstacks-t3183219
Click to expand...
Click to collapse
i was able to install cm13 fine, but as for kitkat roms such as cm11, wont flash
secandRRe said:
i was able to install cm13 fine, but as for kitkat roms such as cm11, wont flash
Click to expand...
Click to collapse
ive only been on KK on few hours, been on LP always.. so try flashing this..
https://www.androidfilehost.com/?w=files&flid=12880
raptorddd said:
ive only been on KK on few hours, been on LP always.. so try flashing this..
https://www.androidfilehost.com/?w=files&flid=12880
Click to expand...
Click to collapse
do i flash this with kitkat rom and gapps or flash it and reboot then flash rom and gapps?
raptorddd said:
ive only been on KK on few hours, been on LP always.. so try flashing this..
https://www.androidfilehost.com/?w=files&flid=12880
Click to expand...
Click to collapse
flashed it and tried to flash pac-man rom 4.4.4 but it failed again
secandRRe said:
flashed it and tried to flash pac-man rom 4.4.4 but it failed again
Click to expand...
Click to collapse
Then my last recomendation would be to instal a kitkat bootloader not bumped.. on your variant i dont know wich one it is.. check here
http://forum.xda-developers.com/ver...s980-resources-bootstacks-unofficial-t3050777
raptorddd said:
Then my last recomendation would be to instal a kitkat bootloader not bumped.. on your variant i dont know wich one it is.. check here
http://forum.xda-developers.com/ver...s980-resources-bootstacks-unofficial-t3050777
Click to expand...
Click to collapse
ok figured it out on my own but thanks for the assistance, needed to flash 12b bootstack.
secandRRe said:
ok figured it out on my own but thanks for the assistance, needed to flash 12b bootstack.
Click to expand...
Click to collapse
your welcomed . thats what i said, you nee the kk boostacks not bumped.
Finnaly Cyanogen OS released his Marshmallow for Oneplus ONE
You guys can download here
Presentation Movie by @kawaii_bacon
You can flash this zip or you can install "Cyanogen Update Tracker" from playstore
IMPORTANT: This is INCREMENTAL/Update OTA so be sure you have 100% stock COS YOG7DAS2K1without Root with stock recovery before flash.
Have fun
I'd love to hear from anyone who was previously on a CM13 ROM and then installed COS13. Do you notice any performance differences? Any notable user-facing features in COS13 that are not present in CM13? Basically is there any real reason for people like me to go back to stock and get this update?
I should mention that I am running the latest build of Sultanxda's CM13 ROM (0404).
megatomic said:
I'd love to hear from anyone who was previously on a CM13 ROM and then installed COS13. Do you notice any performance differences? Any notable user-facing features in COS13 that are not present in CM13? Basically is there any real reason for people like me to go back to stock and get this update?
I should mention that I am running the latest build of Sultanxda's CM13 ROM (0404).
Click to expand...
Click to collapse
I forget to mention that I didn't test it. OP updated
but this is without MOD .... Why?
That is one sketchy link in the OP. Here's the official download link: http://builds.cyngn.com/incremental/bacon/cm-bacon-cee4e8702d-to-e36dd78050-signed.zip
I've downloaded it & tried.But no luck.. TWRP show an error "this device has 5.1.1 user key"..But im already on custom 6.1.1
crazykas said:
I've downloaded it & tried.But no luck.. TWRP show an error "this device has 5.1.1 user key"..But im already on custom 6.1.1
Click to expand...
Click to collapse
Your phone needs to be 100% stock YOG7DAS2K1 if you want to sideload the OTA.
Ahhh screw it, I'm going to do it. I'll be back with my observations.
mekanismen said:
That is one sketchy link in the OP. Here's the official download link: http://builds.cyngn.com/incremental/bacon/cm-bacon-cee4e8702d-to-e36dd78050-signed.zip
Click to expand...
Click to collapse
Link updated, thanks :good:
Good evening everyone!!
My oneplus has Resurection Remix Marshmallow.
For install I flash with twrp cm-12.1-YOG7DAS2K1-bacon-signed-d347503447.zip?
Jjul said:
Good evening everyone!!
My oneplus has Resurection Remix Marshmallow.
For install I flash with twrp cm-12.1-YOG7DAS2K1-bacon-signed-d347503447.zip?
Click to expand...
Click to collapse
Read red letters in OP
Jjul said:
Good evening everyone!!
My oneplus has Resurection Remix Marshmallow.
For install I flash with twrp cm-12.1-YOG7DAS2K1-bacon-signed-d347503447.zip?
Click to expand...
Click to collapse
In cm-12.1-YOG7DAS2K1-bacon-signed-d347503447.zip is there the recovery to?
Jjul said:
In cm-12.1-YOG7DAS2K1-bacon-signed-d347503447.zip is there the recovery to?
Click to expand...
Click to collapse
No
mekanismen said:
Your phone needs to be 100% stock YOG7DAS2K1 if you want to sideload the OTA.
Click to expand...
Click to collapse
well tried that too..But didn't work
crazykas said:
well tried that too..But didn't work
Click to expand...
Click to collapse
Flash an older version of 12.1 (not the latest 12.1.1), let it update to the latest 12.1.1, then manually update the ota to 13... Or edit the updater script to skip checks for release keys..
Setting.Out said:
Flash an older version of 12.1 (not the latest 12.1.1), let it update to the latest 12.1.1, then manually update the ota to 13... Or edit the updater script to skip checks for release keys..
Click to expand...
Click to collapse
i dont know how to edit update script to skip release key verification
crazykas said:
i dont know how to edit update script to skip release key verification
Click to expand...
Click to collapse
Then try the first option..
Running really really good so smooth
Sent from my A0001 using Tapatalk
onyone can create zip for twrp?
Just finished setting up my phone after a complete clean flash (fastboot 12.1.1 + sideloading the update) and I gotta say that it feels really snappy so far. Noticed some new strange included apps, Instagram Content, Twitter Content and Discovery. I guess the Instagram and Twitter apps have something to do with the lock screen, but I've disabled them. I have no idea what Discovery does, so if anyone has a guess I'd love to hear it.
The most interesting thing will be battery life, but my verdict on that will have to wait until I've tested it for a couple of days.
yesterday i flashed an unofficial cm13 rom for my galaxy j5 and my sim isn't detected...what's going on??pls help
chainsawcharlie said:
yesterday i flashed an unofficial cm13 rom for my galaxy j5 and my sim isn't detected...what's going on??pls help
Click to expand...
Click to collapse
https://mega.nz/#!Z0sgUS7Q!V0jLiEHN2h7ztA3G0ZK5CDL-1EpgmZtCHX0zs2wnD_E flash this worked for me
i tried that but still cant make calls..
Which model do you have? Did you flash it along with kernel or just rom?
JaanZZ said:
Which model do you have? Did you flash it along with kernel or just rom?
Click to expand...
Click to collapse
i have the j500fn.i flashed only the rom..
chainsawcharlie said:
i have the j500fn.i flashed only the rom..
Click to expand...
Click to collapse
I have also fn and got no problems with rom.
Did you wipe before flashing? Make full wipe and try re flashing rom.
JaanZZ said:
I have also fn and got no problems with rom.
Did you wipe before flashing? Make full wipe and try re flashing rom.
Click to expand...
Click to collapse
Yeah i wiped everyting but still nothing..which rom do you have?
I use cm 13 by Nick and Ganesh.
https://forum.xda-developers.com/ga...m-cyanogenmod-13-0-samsung-galaxy-j5-t3519580
Also tested RR and both works great. Have you tried flashing back to stock if it works?
JaanZZ said:
I use cm 13 by Nick and Ganesh.
https://forum.xda-developers.com/ga...m-cyanogenmod-13-0-samsung-galaxy-j5-t3519580
Also tested RR and both works great. Have you tried flashing back to stock if it works?
Click to expand...
Click to collapse
yeah i flashed back and it works fine...i am on mm bootloader and i cant use Nick's rom so i flashed zonik's which is a port.maybe the problem is with the rom.
chainsawcharlie said:
yeah i flashed back and it works fine...i am on mm bootloader and i cant use Nick's rom so i flashed zonik's which is a port.maybe the problem is with the rom.
Click to expand...
Click to collapse
That explains a lot. There is many problems with MM bootloader. I couldn't even flash twrp to my bootloader only f version worked correctly.
If you want to use cm you should downgrade to ll first.
JaanZZ said:
That explains a lot. There is many problems with MM bootloader. I couldn't even flash twrp to my bootloader only f version worked correctly.
If you want to use cm you should downgrade to ll first.
Click to expand...
Click to collapse
Maybe that's the only solution..thx a lot bro
chainsawcharlie said:
Maybe that's the only solution..thx a lot bro
Click to expand...
Click to collapse
No I don't think that would work due to what firmware you need to be on if its zoinks cm 13 its mm firmware if its nicks or RR its ll
infixremix said:
No I don't think that would work due to what firmware you need to be on if its zoinks cm 13 its mm firmware if its nicks or RR its ll
Click to expand...
Click to collapse
Yes i know thar zoniks rom requires mm firmware...but i will downgrade to ll to flash nicks.Because i think that the sim error is a problem of zoniks rom.
chainsawcharlie said:
Yes i know thar zoniks rom requires mm firmware...but i will downgrade to ll to flash nicks.Because i think that the sim error is a problem of zoniks rom.
Click to expand...
Click to collapse
Yes good ! Or install RR from @SoUnd001
infixremix said:
Yes good ! Or install RR from @SoUnd001
Click to expand...
Click to collapse
I will try both for sure!!
Hi i just want to install cm11 on my d802 but all links seem to be down is there a mirror or can anybody upload the latest build of cm11?
Endercrafter said:
Hi i just want to install cm11 on my d802 but all links seem to be down is there a mirror or can anybody upload the latest build of cm11?
Click to expand...
Click to collapse
https://drive.google.com/open?id=0B5nY6qKWWbk9Vm1lMWNZTHBjZG8
I think this was the last build (I downloaded it just before the cm site went down)
hope it helps :good:
Jeffery45801 said:
https://drive.google.com/open?id=0B5nY6qKWWbk9Vm1lMWNZTHBjZG8
I think this was the last build (I downloaded it just before the cm site went down)
hope it helps :good:
Click to expand...
Click to collapse
What bootloader is needed for it ? And which bootstacks ?Sorry for asking so much questions ! But still Thank u ?
Endercrafter said:
What bootloader is needed for it ? And which bootstacks ?Sorry for asking so much questions ! But still Thank u
Click to expand...
Click to collapse
Its been a while since I installed it myself but from what I remember, I believe it only worked if it was flashed over the stock g2 kitkat (or jellybean) rom. I've never really used bootstacks myself so I don't really know which one to go for, however I'd assume you could start by looking for ones made for kitkat.
Personally, I would do a clean install of the stock kk rom, reroot, flash custom recovery, and then install cm11.
Jeffery45801 said:
Its been a while since I installed it myself but from what I remember, I believe it only worked if it was flashed over the stock g2 kitkat (or jellybean) rom. I've never really used bootstacks myself so I don't really know which one to go for, however I'd assume you could start by looking for ones made for kitkat.
Personally, I would do a clean install of the stock kk rom, reroot, flash custom recovery, and then install cm11.
Click to expand...
Click to collapse
Ok thank u bro for all ur help ? Ill tell if this works soon