Related
Flashed some day´s ago WP7 but I reverted to WINMO again... and when I try to put an Android Built on it won´t boot...
I get a cmd lines, kernel something and it get the HTC screen and it get stuck in it... Tryied lot´s of diferent sd builds but the result is the same.
I already formated my sd, tried in other WINMO rom´s and other sd and the result is the same!
I have HSPL 1.66
I have the last radio
I have the same as always and previously the the Android worked fine...
Strange!!!
HELP
Please
+1 on this...yeah, I'm running into the same issue after running WP7 and formatting. I've been searching it out, but haven't come up with anything yet. Everything else seems to work fine, but if I try to run android (SD build), I get the cmd line info showing haret is running, but that's as far as it goes...
koz said:
+1 on this...yeah, I'm running into the same issue after running WP7 and formatting. I've been searching it out, but haven't come up with anything yet. Everything else seems to work fine, but if I try to run android (SD build), I get the cmd line info showing haret is running, but that's as far as it goes...
Click to expand...
Click to collapse
Yes! That is what´s happening to me
F*****
I thought you had to have HSPL 2.08 as a minimum for Android to run? Maybe I'm wrong...
mm0
muzicman0 said:
I thought you had to have HSPL 2.08 as a minimum for Android to run? Maybe I'm wrong...
mm0
Click to expand...
Click to collapse
Tryed with HSPL 2.08 and the result is the same...
You do need HSPL 2.08 for Magldr, not Android (unless you need to flash a radio).
@OP What is "the last radio"? Can you give us the version please?
lrbpereira said:
I already formated my sd
Click to expand...
Click to collapse
I take it you did this through your computer? Try formatting it with WinMo - don't know how, never used WinMo but it should be possible. This has worked magic for people where all else failed, it had something to do with a partitioning file.
johncmolyneux said:
You do need HSPL 2.08 for Magldr, not Android (unless you need to flash a radio).
@OP What is "the last radio"? Can you give us the version please?
Click to expand...
Click to collapse
2.15.50.14
StephanV said:
I take it you did this through your computer? Try formatting it with WinMo - don't know how, never used WinMo but it should be possible. This has worked magic for people where all else failed, it had something to do with a partitioning file.
Click to expand...
Click to collapse
As I said before, don´t think it´s a SD problem because I tryed with another SD card and the problem is the same... It´s sometinhg that WP7 change on the phone, that blocked the Android... But it´s strange because task29 sould format all the memory, but something remanes there...
Anyone?
I flash the phone with all the ROM's here and I have the same result. Rebooting continuously and after 10 times I got this screen (see Attached)
Anyone know what is wrong I try 3 different cards with different sizes and nothing I got the same every time. Is getting annoying because on the other phone everything go smooth.
testing MAGLDR v1.13
Wow, looks serious, i'm sorry i can't help though, but maybe you should post this on the magldr and wp7 thread. Also, did this happen to you on Android too?
Derek0228 said:
Wow, looks serious, i'm sorry i can't help though, but maybe you should post this on the magldr and wp7 thread. Also, did this happen to you on Android too?
Click to expand...
Click to collapse
Is doing this only with WP7 I will try MAGLDR v1.13 to see what could be.
Same thing with MAGLDR v1.13 I don't know maybe is the phone I even try with different Radios and still the same.
you installed wp7 then reinstall CWM, thats what happened. try flashing wp7 again.
Download New Wp7 package .... always run extratc the WP7 rar package ...and run exe ..
Next time post your questions in the correct forum please.
Still there are issues
I tried flashing hd2 with MAGLDR v 1.13 and android.
Still i see the same error
robinsonmenezes said:
I tried flashing hd2 with MAGLDR v 1.13 and android.
Still i see the same error
Click to expand...
Click to collapse
I'd run a task29 and start from scratch.
I could use a little help here
OKAY GUY'S I HAVE WINDOWS 7 COMPUTER I HAVE ZUNE AND WINDOWS TOOLS FOR MY PHONE BUT THE THING IS I WHEN I GO TO UPGRADE MY ROM WIN RAR STARTS LIKE IT'S ABOUT UPGRADE BUT IT JUST GO AWAY CAN SOMEONE PLEASE POINT ME IN THE WAY OF AN FIX TOWARD THIS.
bigboy38 said:
OKAY GUY'S I HAVE WINDOWS 7 COMPUTER I HAVE ZUNE AND WINDOWS TOOLS FOR MY PHONE BUT THE THING IS I WHEN I GO TO UPGRADE MY ROM WIN RAR STARTS LIKE IT'S ABOUT UPGRADE BUT IT JUST GO AWAY CAN SOMEONE PLEASE POINT ME IN THE WAY OF AN FIX TOWARD THIS.
Click to expand...
Click to collapse
I've read your post for three times now and still dont know what you are talking about.
could you please be more specific about your problem? and maybe withouth CAPSLOCK?
Oh and I think its the wrong thread,too?
georo said:
I flash the phone with all the ROM's here and I have the same result. Rebooting continuously and after 10 times I got this screen (see Attached)
Anyone know what is wrong I try 3 different cards with different sizes and nothing I got the same every time. Is getting annoying because on the other phone everything go smooth.
Click to expand...
Click to collapse
i can't be sure what the reason for this is,but you could always install the official nbh to remove magldr and hspl. then, try again from scratch. that's what i would do. also, the only spl magldr would work for me is 2.08. but then again, you have a tmous hd2..... from what i've seen the hd2 roms don't use the whole 1024 nand, but just half of it(like normal leos) anyway - i don't know if it has anything to do with your problem, but i suggest you start over from scratch, just to be sure....
Thank you guy for all the suggestions but I give up and I install WM6.5 and Android back. I tried all the possibilities and still same thing.
I am still thinking is something which WP7 don't like on this phone. Thank you for all your support.
okay sorry for the caps but i have new computer with widows 7 on it .now zune sees my phone when connect it but when i try to change the radio on it it doesnt find my phone iam i missing a driver are soething it start like its about upgrade my radio but then it just goes away without an error i use win rar file too change radios and rom but now it just dont work i hope i explained it a liittle better thanks for the help.
Have you tried different radios??
bigboy38 said:
okay sorry for the caps but i have new computer with widows 7 on it .now zune sees my phone when connect it but when i try to change the radio on it it doesnt find my phone iam i missing a driver are soething it start like its about upgrade my radio but then it just goes away without an error i use win rar file too change radios and rom but now it just dont work i hope i explained it a liittle better thanks for the help.
Click to expand...
Click to collapse
thats better, but still not perfect. you say, you changed your radios and roms already, but now it doesnt work anymore?
Try another USB-port.
And I hope you know, that to change radios, you dont need to enter the USB-Flasher-mode of magldr. to change the radiorom, you still need to enter the bootloader-mode by pressing the volume-down-button and power while phone is off.
Its as simple as that:
when executing a DAF.exe: use usb-flashermode of magldr.
when executing ROMUpdateUtility.exe: use bootloader.
and what do you mean by winrar-file?
you need to extract the radio first with winrar before you use it.
its win rar thats not working .
mideel said:
thats better, but still not perfect. you say, you changed your radios and roms already, but now it doesnt work anymore?
Try another USB-port.
And I hope you know, that to change radios, you dont need to enter the USB-Flasher-mode of magldr. to change the radiorom, you still need to enter the bootloader-mode by pressing the volume-down-button and power while phone is off.
Its as simple as that:
when executing a DAF.exe: use usb-flashermode of magldr.
when executing ROMUpdateUtility.exe: use bootloader.
and what do you mean by winrar-file?
you need to extract the radio first with winrar before you use it.
Click to expand...
Click to collapse
i start too extract the radio and it goes away is there a driver are something i missing i never had this problem
Sorry for the Question but it magldr really dangerous for HD2?
I know that writing a dirty code in the Radio Rom onthefly.
I think it was a code of HTC Desire.
But what is when i go back to hspl 2.08.0000?
Then isn't possible to write a dirty code in the Radio ROM.
Or not?
It´s only an Idea.
No, it's not dangerous
But why have many users problems with magldr?
Not with clk. I dont know why.
That makes everyone insecure.
davinci2007 said:
Sorry for the Question but it magldr really dangerous for HD2?
I know that writing a dirty code in the Radio Rom onthefly.
I think it was a code of HTC Desire.
But what is when i go back to hspl 2.08.0000?
Then isn't possible to write a dirty code in the Radio ROM.
Or not?
It´s only an Idea.
Click to expand...
Click to collapse
yep sure, it will burn your car
Magldr simply is an OS witch can load other OS.. it has his kernel etc etc.. So, you could unplug cable when phone is flashing magldr, it's only a "copy" of the data into NAND SD
you can't unplug cable when you're flashing ROM RADIO, and SPL, in that case phone freezes, and, i think it's definitely dead, or you can try to reput SPL files in ROM memory via htc's serial cable, sure, not with USB cable
So, Magldr is the same as Windows Mobile, you install it by using the same method, by HSPL, as you do with Windows Mobile, and, if you unplug cable when you're uploading original Windows Mobile, phone will boot in SPL, but not in WM (because you don't have files in the NAND ROM)
i hope you'll understand what's the difference between OS and SPL.. thus.. what is magldr
davinci2007 said:
But why have many users problems with magldr?
Not with clk. I dont know why.
That makes everyone insecure.
Click to expand...
Click to collapse
who has problems?
the only issue in 1.13 is the charging mode, you can't charge phone when it's offiine, magldr freezes and (in 1.13 reboots, in 1.12 freeze phone), i think it happens because magldr doesen't have the right "libreries" witch can "load" the charging process, if you see, in all phones, when you plug the carging cable, phone will load something.. in nokia, phones boots and you see the charging icon in the screen, in htc phone boots and you see the led indicator, so, in chargin mode, phone's hardware is on, it's 'configuring' the right way to charge battery (that's not so simply)
other issues? i have WP7, and i didn't have problems with all WP7 rom i tryed, with android roms too, i think you could have a broken HD2, or a tmobile version (you have to upgrade the certify android tmobile version rom).. if you can't flash android or wp7 roms by magldr, i think you don't have the right driver in windows, so windows (pc) can't talk with hd2
if you have problems, write here
davinci2007 said:
But why have many users problems with magldr?
Not with clk. I dont know why.
That makes everyone insecure.
Click to expand...
Click to collapse
What kind of issues u are talking about?
in most cases the user is the problem and not the software
Sent from my HTC HD2 using XDA Premium App
This is not a statement on my part but I've read about this and i am now unsure.
what exactly have you read?
Thats magldr brick hd2 because a dirty code for activated rmnet.
Dirty code from hd desire and this maybe on the fly write this in the Radio ROM.
davinci2007 said:
This is not a statement on my part but I've read about this and i am now unsure.
Click to expand...
Click to collapse
maybe they have a brocken hd2, or a driver conflict in windows (pc)
if you can flash wm6.5 roms with hspl 2.08 you can load magldr. if you don't have hspl 2.08 you can't load hspl (and cooked roms)
i think users has problems, not phones
davinci2007 said:
Thats magldr brick hd2 because a dirty code for activated rmnet.
Dirty code from hd desire and this maybe on the fly write this in the Radio ROM.
Click to expand...
Click to collapse
where do you read this?
i never ever heard it
i reflashed magldr for about 30 times.. no one problem.. and i'm using it by the first 1.10 version
EDIT: maybe that users downloads magldr not in this forum, and maybe someone modifies magldr.nbh files with an haked radio witch has the malware
Cotulla has open my eyes and now i see the world clearer.
He is very cool. Thanks Master Cotulla.
Maybe he write down the facts about magldr and clk.
No danger of both.
There were just rumors.
Its really dangerous!! Im serious!!! IF you flash it then you device will explode!!!!!
...
Its safe
You only makes fun of me.
I only readed this. No more.
You use magldr or clk? Hmmmmm???
ive had my hd2 for nearly 18 months and was new to all this lol
i remember the days when i had android on my sd card and everytime u rebooted,it went back to windows mobile lol. then 1 day i saw on youtube a lad puttin a cyanogen mod rom on via cwm and magldr.........I WET MYSELF lol and av never looked back. yeh,i **** myself 1st time cos i to worried about brickin my phone. but all U AV TO DO is follow all the instructions EXACTLY as they say and u won't brick ur phone.your best and safest option is to search rootin hd2 on youtube,download all there files in the link and also most videos show them doin it,so follow it step by step,pausin the video as u go along(makes it easier) then ur laughin,u need any help inbox me and i'll even find u the video/person i watched and learned from,magldr is spot on,then u'll step up to cwm lol,i av cos its abit more straight forward,u just put the file on ur sd card and install via cwm,it extracts and installs for u,simple............hope this convinces u lol
I have no problem with flashing but another users have many problems and also 2-4-8 Weeks/Month after flashing. 3 reboots and.....crash...nothing more.
And now? What is the reason? No Hardreset...nothing help...Upsssss....
davinci2007 said:
Thats magldr brick hd2 because a dirty code for activated rmnet.
Dirty code from hd desire and this maybe on the fly write this in the Radio ROM.
Click to expand...
Click to collapse
i also want to know where you have read this, post the site... ive not once had a problem with magldr and have used it almost since release ...
And now this....Klick.
giv it a try,then reep u rewards
Sent from my SENSATIONIZED HTC HD2 Pyramid via magldr 1.13 using XDA Premium App
And now? Silent!
No dirty code in magldr?
Originally Posted by
Well, yes, at some point Cotulla loaded a desire radio in the hd2. And yes, the main problem he faced is how to do it easily. At the end, he did some black magic to load part of the desire radio in current magldr to make rmnet works, but I think we won't have more than this.
Click to expand...
Click to collapse
Haaaa.....Explanation please.......
davinci2007 said:
Thats magldr brick hd2 because a dirty code for activated rmnet.
Dirty code from hd desire and this maybe on the fly write this in the Radio ROM.
Click to expand...
Click to collapse
Two things, I understand your awareness of the sudden influx of bad block information, but dear God man please use some contextual syntax so that people better understand you. One sentence or phrase that fully describes your thoughts in your opinion isn't necessarily the proper way to communicate clearly to other people.
Bad blocks people, OP is talking about bad blocks
I bought a used HD2 running CM10(NexusHD2-JellyBean v1.3a). I want to run WP7.8 on it so I looked up the ways to do that. Tutorials like http://forum.xda-developers.com/show...postcount=1193 say to flash a stock winmo6.5 rom before moving to WP7. I tried to do that by trying to flash RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2. 15.50.14_LEO_S_Ship. The normal RUU Updat Utility came up with lots or errors, but mostly connection or no response from device issues. So upon further reading i found out an alternate way to go about it by renaming the nbh and putting it in an sd card. I used 2GB microSD card and tried to flash it. But mid-way it stopped and upon reboot it said software update failed with a triangle. I went into the 3-color screen and there the message was present as well with two other messages microp led and microp touch. I tried the sd flash method again but it stopped by giving a not allow 00028002 error every time. I flashed HSPL 2.08.000 from the HSPL4 executable and Android booted up again.
i also tried RUU_Leo_S_TMO_UK_3.14.110.1_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship_2 but the same update error(266, i think) came up
Can i now go to a stock rom and then to WP7?
Thanks, in advance
Device details:
Boots with purple "stick together" logo(Weird, google search says this is tmobile america slogan yet this device is not US)
S/N:ht04anw01415
HTC HD2 T8585 P81100 (from the back)
Anyone?
follow the links below & your ready togo
mengfei said:
follow the links below & your ready togo
Click to expand...
Click to collapse
thanks for the reply but i want to go back to the stock rom which it seems i'm unable to do. i tried the usb flash and microsd flash methods with both RUUs. if i get to stock then i can proceed to wp7 with a clean slate. ATM i've flashed energy rom (Energy.Leo.29022.Sense2.5.Reference.Jul.05) with radio 2.15.50.14 in an attempt to see if doing this would help flash stock rom but no success.
IF you want WP7 no need to go back to stock ROM, I guess you haven't take a look at this link
http://forum.xda-developers.com/showthread.php?p=25781675#post25781675
once you have Magldr in your HD2, next steps would be easy as pushing a button
got windows phone 7.8 on it, thanks. But what if i want to later on return to stock rom? even when i was trying to wipe with task29 it was giving same error 266 and as of yet i haven't successfully flashed anything by the RUU method.
HD 2 Problems Win7
hi guys
Yesterday I tried to install HD2 WP7 ... and install a new Radio ROM my phone off, and since I did not start .... no reset button under the battery cover does not work .... it happened to anyone of you?? ... I had previously installed the official 6.5
Ralph79 said:
hi guys
Yesterday I tried to install HD2 WP7 ... and install a new Radio ROM my phone off, and since I did not start .... no reset button under the battery cover does not work .... it happened to anyone of you?? ... I had previously installed the official 6.5
Click to expand...
Click to collapse
Nope but then again, i never had to flash another radio. Try to follow the tutorial in mengfei's signature and if it doesn't work create a separate thread for others to weigh in.
geforceonline said:
Nope but then again, i never had to flash another radio. Try to follow the tutorial in mengfei's signature and if it doesn't work create a separate thread for others to weigh in.
Click to expand...
Click to collapse
If you want stock windows mobile (with HSPL) > Use HSPL to flash windows mobile using the RUU.
If you want stock winmo AND stock spl > Install winmo using HSPL, then use HSPL package to uninstall HSPL (i.e. install stock SPL).
That's the only way I can think of since you're getting lots of errors doing anything without HSPL.
Marvlesz said:
If you want stock windows mobile (with HSPL) > Use HSPL to flash windows mobile using the RUU.
If you want stock winmo AND stock spl > Install winmo using HSPL, then use HSPL package to uninstall HSPL (i.e. install stock SPL).
That's the only way I can think of since you're getting lots of errors doing anything without HSPL.
Click to expand...
Click to collapse
I presume you're talking about the regular USB>3-color screen>RUU(on pc) method. Well, i've been doing that for stock roms and other stuff(splashes, etc.) too but i almost always seem to get error 266 update error.
geforceonline said:
I presume you're talking about the regular USB>3-color screen>RUU(on pc) method. Well, i've been doing that for stock roms and other stuff(splashes, etc.) too but i almost always seem to get error 266 update error.
Click to expand...
Click to collapse
If you don't have HSPL, you will get an error when trying to flash almost anything.
You said you flashed HSPL, but in fact you didn't
geforceonline said:
.. I flashed HSPL 2.08.000 from the HSPL4 ..
Click to expand...
Click to collapse
From HSPL4 you can flash the stock SPL, which is what you did. HSPL 2.08.0000 is stock SPL. With that, you can't do much.
You need 2.08.HSPL.
Try again and report back.
Marvlesz said:
If you don't have HSPL, you will get an error when trying to flash almost anything.
You said you flashed HSPL, but in fact you didn't
From HSPL4 you can flash the stock SPL, which is what you did. HSPL 2.08.0000 is stock SPL. With that, you can't do much.
You need 2.08.HSPL.
Try again and report back.
Click to expand...
Click to collapse
I just tried the USB RUU(with WWE and TMOUK versions) method with 2.08.HSPL and it gave the same error 266
geforceonline said:
I just tried the USB RUU(with WWE and TMOUK versions) method with 2.08.HSPL and it gave the same error 266
Click to expand...
Click to collapse
Try this easy fix:
http://forum.xda-developers.com/showthread.php?t=993472
To sum it up:
*Try a different port.
*Install ActiveSync/WMDC.
*If already installed, uninstall then re-install, or simply try a different computer if you have.
Marvlesz said:
Try this easy fix:
http://forum.xda-developers.com/showthread.php?t=993472
To sum it up:
*Try a different port.
*Install ActiveSync/WMDC.
*If already installed, uninstall then re-install, or simply try a different computer if you have.
Click to expand...
Click to collapse
have WMDC/Zune and drivers(also had activesync but deleted it because even then it didnt work)
tried all three ports
reinstalled it as well but unfortunatly no other pc is available atm
geforceonline said:
have WMDC/Zune and drivers(also had activesync but deleted it because even then it didnt work)
tried all three ports
reinstalled it as well but unfortunatly no other pc is available atm
Click to expand...
Click to collapse
Well, I am sorry then. I am out of ideas; you have wait for other members with greater knowledge.
Edit:
Maybe the USB cable? Although I highly doubt it, there is no harm in trying. Try a different cable and see what happens.
Marvlesz said:
Well, I am sorry then. I am out of ideas; you have wait for other members with greater knowledge.
Edit:
Maybe the USB cable? Although I highly doubt it, there is no harm in trying. Try a different cable and see what happens.
Click to expand...
Click to collapse
well, thanks for trying!
edit: IT WORKED! I tried another cable and while recognizing the pc went to some qualcomm drivers that i used to have and reverted to htc ones and the RUU picked it up and the flashing commenced. Thanks a ton!
Hi,
I have Gingerbread 2.3.5 (Nexus) as the only Operation System on my HD2. It crashes when I use some application e.g. Scan my SD card for medias, using a music player. Now I want to switch to a better ROM like MIUI (that's what I've heard). How can I do that?
Please consider that:
- I'm beginner
- I have only Android (No Windows)
- I have HSLP v 3.* (A version of MIUI which I downloaded and tried to install, only support HSPL v 2.* or bellow)
I will appreciate any kinds of help.
Thanks,
Mas
what loader do you have?
anyways check out the link below & give them a good read, it might help
mengfei said:
what loader do you have?
anyways check out the link below & give them a good read, it might help
Click to expand...
Click to collapse
If I'm not mistaken, this is the bootloader and other info which I have:
LEO100 HX-BC SHIP S-OFF
HBOOT-1.5.0.1
SPL 3.03
RADIO-2.15.50.14
And bytheway, it seems that I made a mistake in my subject. In the bootloader menu it says "NAND Android"
sallaneh said:
If I'm not mistaken, this is the bootloader and other info which I have:
LEO100 HX-BC SHIP S-OFF
HBOOT-1.5.0.1
SPL 3.03
RADIO-2.15.50.14
And bytheway, it seems that I made a mistake in my subject. In the bootloader menu it says "NAND Android"
Click to expand...
Click to collapse
Either I'm new, or that phone's details look weird.
Where did you get it from? And if you're a beginner, how did you manage to get Android on it?
Marvlesz said:
Either I'm new, or that phone's details look weird.
Where did you get it from? And if you're a beginner, how did you manage to get Android on it?
Click to expand...
Click to collapse
Well! I asked (and paid) someone to install it for me
I'm thinking about re-installing a Windows and then install an android on my SD card if I don't have any other options.
You've been given a fake I think. The HD2 doesn't have HBOOT or S-ON/OFF in the bootloader.
Nigeldg said:
You've been given a fake I think. The HD2 doesn't have HBOOT or S-ON/OFF in the bootloader.
Click to expand...
Click to collapse
What do you mean by fake? It is working (the phone and OS) and in the software info it is written Android 2.3.5
sallaneh said:
What do you mean by fake? It is working (the phone and OS) and in the software info it is written Android 2.3.5
Click to expand...
Click to collapse
Doesn't mean that it's an HD2.
sallaneh said:
What do you mean by fake? It is working (the phone and OS) and in the software info it is written Android 2.3.5
Click to expand...
Click to collapse
you can get one here as low as $100 New
http://s.taobao.com/search?q=HTC+HD...rceId=tb.index&spm=1.1000386.5803581.d4908513
haha. Well I got it as a brand new phone some times ago by myself and was using Windows phone but recently asked from someone to install Andorid on it so it is not a fake.
I wonder to know if there is a way to return my windows phone back and then install an Android on its SD card.
sallaneh said:
haha. Well I got it as a brand new phone some times ago by myself and was using Windows phone but recently asked from someone to install Andorid on it so it is not a fake.
I wonder to know if there is a way to return my windows phone back and then install an Android on its SD card.
Click to expand...
Click to collapse
Could you upload pictures of the screens where u see that stuff?
And to return to winmo 6.5,
1. downlad the rom from htc.com
2. boot into the bootloader ( to do this, turn off the phone, turn it on while holding the volume down and power key until u boot into the bootloader )
3. Connect your phone to the pc using the usb
4. The 'serial' word should change to 'usb', at this point, just run the rom.
All this is assuming you have a HD2.
adil1508 said:
Could you upload pictures of the screens where u see that stuff?
And to return to winmo 6.5,
1. downlad the rom from htc.com
2. boot into the bootloader ( to do this, turn off the phone, turn it on while holding the volume down and power key until u boot into the bootloader )
3. Connect your phone to the pc using the usb
4. The 'serial' word should change to 'usb', at this point, just run the rom.
All this is assuming you have a HD2.
Click to expand...
Click to collapse
Thanks for your reply and assumption!
I have a question though, do I need to do task29 first then do your 1-4 steps?
I won't face any problem due to the version of my SPL etc?
Regards
sallaneh said:
Thanks for your reply and assumption!
I have a question though, do I need to do task29 first then do your 1-4 steps?
I won't face any problem due to the version of my SPL etc?
Regards
Click to expand...
Click to collapse
Hi, I would use task29, as it wipes the internal memory clean. Do note that some people have bad blocks ( a bit of corrupted memory ) after using task29. But i have used it alot and never faced this issue, If u havnt done it before, no harm it using it.
adil1508 said:
Hi, I would use task29, as it wipes the internal memory clean. Do note that some people have bad blocks ( a bit of corrupted memory ) after using task29. But i have used it alot and never faced this issue, If u havnt done it before, no harm it using it.
Click to expand...
Click to collapse
tnx.
I will try task29 and lets see what will happen.
As you can see in the title, I have a NAND Gingerbread 2.3.5 (Nexus) and I'm not very happy with it so I want to recover my winmo 6.5 and then install another rom of Androdi on my SD. Am I in the right path?
- task29
- put the stock rom on my SD
- reboot and install the winmo 6.5
regards,
Masood
its basically task29, then u boot into the bootloader, ( because the internal memory is wiped, nothing else u can boot into ), then u connect the phone to the pc using the usb, then just run the rom u downloaded, its an executable. If it reads the phone ( which it will ) it will automatically install winmo 6.5
And just to inform you, u have a really really old rom. After winmo 6.5, i suggest u install one of the latest gingerbread roms. I use Typhoon's rom, its really fast and smooth and bugfree. PERFECT for everyday use
adil1508 said:
its basically task29, then u boot into the bootloader, ( because the internal memory is wiped, nothing else u can boot into ), then u connect the phone to the pc using the usb, then just run the rom u downloaded, its an executable. If it reads the phone ( which it will ) it will automatically install winmo 6.5
And just to inform you, u have a really really old rom. After winmo 6.5, i suggest u install one of the latest gingerbread roms. I use Typhoon's rom, its really fast and smooth and bugfree. PERFECT for everyday use
Click to expand...
Click to collapse
How can I move to Typhoon Rom then? Do I need to remove everything?
As you might remember, I have a Nexus 2.3.5 NAND on my HD2.
Regards
sallaneh said:
How can I move to Typhoon Rom then? Do I need to remove everything?
As you might remember, I have a Nexus 2.3.5 NAND on my HD2.
Regards
Click to expand...
Click to collapse
Alright. U have android 2.3.5. Thats really old. You will have to answer some questions,
1) Do you have clockworkmod recovery( CWR ) installed?
2) Did u flash the rom yourself? Are you familiar with the whole flashing process?
I'm guessing you already have MAGLDR bootloader installed. And you dont need to remove everything. You will be adding a few things, thats all.
Btw, you will have to make backups of everything you need. Eg, stuff on your sd card, pics and all. And your SD card WILL BE WIPED CLEAN.
I JUST READ YOUR OLD POST. lol sorry
If you have MAGLDR installed, Which probably is, you dont need task29. Its quite simple from there actually
adil1508 said:
its basically task29, then u boot into the bootloader, ( because the internal memory is wiped, nothing else u can boot into ), then u connect the phone to the pc using the usb, then just run the rom u downloaded, its an executable. If it reads the phone ( which it will ) it will automatically install winmo 6.5
And just to inform you, u have a really really old rom. After winmo 6.5, i suggest u install one of the latest gingerbread roms. I use Typhoon's rom, its really fast and smooth and bugfree. PERFECT for everyday use
Click to expand...
Click to collapse
adil1508 said:
Alright. U have android 2.3.5. Thats really old. You will have to answer some questions,
1) Do you have clockworkmod recovery( CWR ) installed?
2) Did u flash the rom yourself? Are you familiar with the whole flashing process?
I'm guessing you already have MAGLDR bootloader installed. And you dont need to remove everything. You will be adding a few things, thats all.
Btw, you will have to make backups of everything you need. Eg, stuff on your sd card, pics and all. And your SD card WILL BE WIPED CLEAN.
I JUST READ YOUR OLD POST. lol sorry
If you have MAGLDR installed, Which probably is, you dont need task29. Its quite simple from there actually
Click to expand...
Click to collapse
I will check these parameters as soon as I get home!
sallaneh said:
I will check these parameters as soon as I get home!
Click to expand...
Click to collapse
Good,
Btw, here is the rom link. Download it. Its neccassay regardless of what answers you provide
http://forum.xda-developers.com/showthread.php?t=933951