Sorry for the Question but it magldr really dangerous for HD2?
I know that writing a dirty code in the Radio Rom onthefly.
I think it was a code of HTC Desire.
But what is when i go back to hspl 2.08.0000?
Then isn't possible to write a dirty code in the Radio ROM.
Or not?
It´s only an Idea.
No, it's not dangerous
But why have many users problems with magldr?
Not with clk. I dont know why.
That makes everyone insecure.
davinci2007 said:
Sorry for the Question but it magldr really dangerous for HD2?
I know that writing a dirty code in the Radio Rom onthefly.
I think it was a code of HTC Desire.
But what is when i go back to hspl 2.08.0000?
Then isn't possible to write a dirty code in the Radio ROM.
Or not?
It´s only an Idea.
Click to expand...
Click to collapse
yep sure, it will burn your car
Magldr simply is an OS witch can load other OS.. it has his kernel etc etc.. So, you could unplug cable when phone is flashing magldr, it's only a "copy" of the data into NAND SD
you can't unplug cable when you're flashing ROM RADIO, and SPL, in that case phone freezes, and, i think it's definitely dead, or you can try to reput SPL files in ROM memory via htc's serial cable, sure, not with USB cable
So, Magldr is the same as Windows Mobile, you install it by using the same method, by HSPL, as you do with Windows Mobile, and, if you unplug cable when you're uploading original Windows Mobile, phone will boot in SPL, but not in WM (because you don't have files in the NAND ROM)
i hope you'll understand what's the difference between OS and SPL.. thus.. what is magldr
davinci2007 said:
But why have many users problems with magldr?
Not with clk. I dont know why.
That makes everyone insecure.
Click to expand...
Click to collapse
who has problems?
the only issue in 1.13 is the charging mode, you can't charge phone when it's offiine, magldr freezes and (in 1.13 reboots, in 1.12 freeze phone), i think it happens because magldr doesen't have the right "libreries" witch can "load" the charging process, if you see, in all phones, when you plug the carging cable, phone will load something.. in nokia, phones boots and you see the charging icon in the screen, in htc phone boots and you see the led indicator, so, in chargin mode, phone's hardware is on, it's 'configuring' the right way to charge battery (that's not so simply)
other issues? i have WP7, and i didn't have problems with all WP7 rom i tryed, with android roms too, i think you could have a broken HD2, or a tmobile version (you have to upgrade the certify android tmobile version rom).. if you can't flash android or wp7 roms by magldr, i think you don't have the right driver in windows, so windows (pc) can't talk with hd2
if you have problems, write here
davinci2007 said:
But why have many users problems with magldr?
Not with clk. I dont know why.
That makes everyone insecure.
Click to expand...
Click to collapse
What kind of issues u are talking about?
in most cases the user is the problem and not the software
Sent from my HTC HD2 using XDA Premium App
This is not a statement on my part but I've read about this and i am now unsure.
what exactly have you read?
Thats magldr brick hd2 because a dirty code for activated rmnet.
Dirty code from hd desire and this maybe on the fly write this in the Radio ROM.
davinci2007 said:
This is not a statement on my part but I've read about this and i am now unsure.
Click to expand...
Click to collapse
maybe they have a brocken hd2, or a driver conflict in windows (pc)
if you can flash wm6.5 roms with hspl 2.08 you can load magldr. if you don't have hspl 2.08 you can't load hspl (and cooked roms)
i think users has problems, not phones
davinci2007 said:
Thats magldr brick hd2 because a dirty code for activated rmnet.
Dirty code from hd desire and this maybe on the fly write this in the Radio ROM.
Click to expand...
Click to collapse
where do you read this?
i never ever heard it
i reflashed magldr for about 30 times.. no one problem.. and i'm using it by the first 1.10 version
EDIT: maybe that users downloads magldr not in this forum, and maybe someone modifies magldr.nbh files with an haked radio witch has the malware
Cotulla has open my eyes and now i see the world clearer.
He is very cool. Thanks Master Cotulla.
Maybe he write down the facts about magldr and clk.
No danger of both.
There were just rumors.
Its really dangerous!! Im serious!!! IF you flash it then you device will explode!!!!!
...
Its safe
You only makes fun of me.
I only readed this. No more.
You use magldr or clk? Hmmmmm???
ive had my hd2 for nearly 18 months and was new to all this lol
i remember the days when i had android on my sd card and everytime u rebooted,it went back to windows mobile lol. then 1 day i saw on youtube a lad puttin a cyanogen mod rom on via cwm and magldr.........I WET MYSELF lol and av never looked back. yeh,i **** myself 1st time cos i to worried about brickin my phone. but all U AV TO DO is follow all the instructions EXACTLY as they say and u won't brick ur phone.your best and safest option is to search rootin hd2 on youtube,download all there files in the link and also most videos show them doin it,so follow it step by step,pausin the video as u go along(makes it easier) then ur laughin,u need any help inbox me and i'll even find u the video/person i watched and learned from,magldr is spot on,then u'll step up to cwm lol,i av cos its abit more straight forward,u just put the file on ur sd card and install via cwm,it extracts and installs for u,simple............hope this convinces u lol
I have no problem with flashing but another users have many problems and also 2-4-8 Weeks/Month after flashing. 3 reboots and.....crash...nothing more.
And now? What is the reason? No Hardreset...nothing help...Upsssss....
davinci2007 said:
Thats magldr brick hd2 because a dirty code for activated rmnet.
Dirty code from hd desire and this maybe on the fly write this in the Radio ROM.
Click to expand...
Click to collapse
i also want to know where you have read this, post the site... ive not once had a problem with magldr and have used it almost since release ...
And now this....Klick.
giv it a try,then reep u rewards
Sent from my SENSATIONIZED HTC HD2 Pyramid via magldr 1.13 using XDA Premium App
And now? Silent!
No dirty code in magldr?
Originally Posted by
Well, yes, at some point Cotulla loaded a desire radio in the hd2. And yes, the main problem he faced is how to do it easily. At the end, he did some black magic to load part of the desire radio in current magldr to make rmnet works, but I think we won't have more than this.
Click to expand...
Click to collapse
Haaaa.....Explanation please.......
davinci2007 said:
Thats magldr brick hd2 because a dirty code for activated rmnet.
Dirty code from hd desire and this maybe on the fly write this in the Radio ROM.
Click to expand...
Click to collapse
Two things, I understand your awareness of the sudden influx of bad block information, but dear God man please use some contextual syntax so that people better understand you. One sentence or phrase that fully describes your thoughts in your opinion isn't necessarily the proper way to communicate clearly to other people.
Bad blocks people, OP is talking about bad blocks
Related
Hey everyone, this is my first post.
So, i recently attempted to put magdlr and the android nand on my hd2. But when the dft application to get android gave me an error. I found out that it was my ROM that was the problem. So, I flashed my Rom and bricked it. I have a new hd2 today with
ROM version 3.14
Radio 2.15
I still want that android rom and I ask if anyone can give me step by step processes on how to get it?
silentdea said:
Hey everyone, this is my first post.
So, i recently attempted to put magdlr and the android nand on my hd2. But when the dft application to get android gave me an error. I found out that it was my ROM that was the problem. So, I flashed my Rom and bricked it. I have a new hd2 today with
ROM version 3.14
Radio 2.15
I still want that android rom and I ask if anyone can give me step by step processes on how to get it?
Click to expand...
Click to collapse
i
If you can get it to the bootloader tben it is not bricked. While the phone is ocf gold down the volume button and tap the power(end) button and the tri color bootloader should come up. let me know if you can do this and I will guide you further.
The phone won't turn on, charge, or even show a screen.
I can't go into bootloader, can't go into hard reset mode.
When I go into usb mode, all I see on my computer screen is something about Qualcomm. Nothing else, I can't even access the harddrive space.
I'm pretty sure its fully bricked.
the problem i have right now isn't returning the phone, I already have the phone in hand right now. The question i'm asking is..how do I put android nand on my phone right now? My ROM is the newest right now.
silentdea said:
The phone won't turn on, charge, or even show a screen.
I can't go into bootloader, can't go into hard reset mode.
When I go into usb mode, all I see on my computer screen is something about Qualcomm. Nothing else, I can't even access the harddrive space.
I'm pretty sure its fully bricked.
Click to expand...
Click to collapse
Oh yeah it is bricked then.
A few questions though. Do you have a T-Mobile HD2, I think you do. What exactly did you try to flash to it, I want spacifics like ROM name and Radio version. I ask this cause I garantee you that you flashed wrong radio version.
Using a JTAG and a ORT iz the only way to fix a bricked HD2. Go here to learn more.
silentdea said:
the problem i have right now isn't returning the phone, I already have the phone in hand right now. The question i'm asking is..how do I put android nand on my phone right now? My ROM is the newest right now.
Click to expand...
Click to collapse
So are you saying you have yhe replacement HD2 right now? A working HD2 I mean. if so I can help you out just need to know this fitst............I am a little confused lol.
lol sorry if I was being really unclear. I have a working replacement hd2 right now. I already sent T-mobile my bricked phone. I just want to know how to get android nand on my phone right now.
go to android section fro htc hd2 or search on youtube there is 1 million of tutorials
silentdea said:
lol sorry if I was being really unclear. I have a working replacement hd2 right now. I already sent T-mobile my bricked phone. I just want to know how to get android nand on my phone right now.
Click to expand...
Click to collapse
Ok no problem just download HSPL 3 or HSPL 4. Run wich ever one you download and install HSPL 2.08 as this is the highest HSPL that MAGLDR supports right now. Next download MAGLDR 1.13. Afteryou have both of these installed pick out a NAND Andriod ROM from here and follow the instructioms of the ROMs' developer to install it to your HD2 as there is two different ways to install now via computer and USB flash or via SD card flash. For a great dtep by step guide got to XDA member MSkip's guide it is a really good giude.
Hope tbis is what you are looking for
are you guys sure that hspling my phone to 2.08 is okay even if I have rom 3.14??
silentdea said:
are you guys sure that hspling my phone to 2.08 is okay even if I have rom 3.14??
Click to expand...
Click to collapse
Yes you are totally cool. Besides if you are going to flash a NAND Andriod ROM to your HD2 your Windows Mobile will be wiped from the phone and become a Andriod only device unless you flash something else to it.
The things you have to fear is flashing a non compatible radio for your HD2. Sense you have a TMOUS HD2 like me you have to make sure your radio is a TMOUS radio. Easiest way to do this is look at the third set of numbers. Example.
Radio version 2.15.50.14 Yes Radio version 2.07.51.22 No
Click to expand...
Click to collapse
As long as you have a 50 in that spot you are good with two exzemptions. Do not use radios that look like this.
2.04.50.xx or 2.05.50.xx They will brick your TMOUS HD2
Click to expand...
Click to collapse
I'm trying to fix a co-workers' HTC HD2. It *had* WM 6.5 but she somehow installed SPL 3.03 (?) and I have been unable to make ANY progress with flashing a ROM onto her phone. Any help would be greatly appreciated...
Note: I'm only familiar with working on my Captivate, the XDA community has been good to me in the past, hoping some of you can spare a few minutes to help me help out my co-worker.
Download HSPL4, boot into bootloader (tricolor) and flash HSPL 2.08.
BTW: Wrong forum!
SynGamer said:
I'm trying to fix a co-workers' HTC HD2. It *had* WM 6.5 but she somehow installed SPL 3.03 (?) and I have been unable to make ANY progress with flashing a ROM onto her phone. Any help would be greatly appreciated...
Note: I'm only familiar with working on my Captivate, the XDA community has been good to me in the past, hoping some of you can spare a few minutes to help me help out my co-worker.
Click to expand...
Click to collapse
Have you read my flashing tutorials for the HD2?
Mark.
mskip said:
Have you read my flashing tutorials for the HD2?
Mark.
Click to expand...
Click to collapse
Lol, I was genuinely about to post this guide by you to tell him what to do
Nigeldg said:
Lol, I was genuinely about to post this guide by you to tell him what to do
Click to expand...
Click to collapse
@syngamer if its Android that you want to put on the phone then read the requirements in the above thread before you start. As you have SPL 3.0.3 on the phone you will want to follow *THIS* guide to install HardSPL and select HSPL 2.0.8 from the list or Magldr wont run properly. Also boot into the bootloader and make sure you have a new radio as that can cause problems too.
MArk.
Thanks guys, but no matter which guide/tutorial I try I keep running into the ERROR [262] : UPDATE ERROR
you should give more detail, especially things like the full filename of the file you are using that gives the error, and details of what you are doing to perform the flash, and details of what you think you mean by ''It *had* WM 6.5 but she somehow installed SPL 3.03 '' since thats a normal spl?
ALso, is it a normal hd2, or is it a tmous hd2? (tmous is t mobile US and has green send key red end key, and its very important to know which it is)
samsamuel said:
you should give more detail, especially things like the full filename of the file you are using that gives the error, and details of what you are doing to perform the flash, and details of what you think you mean by ''It *had* WM 6.5 but she somehow installed SPL 3.03 '' since thats a normal spl?
ALso, is it a normal hd2, or is it a tmous hd2? (tmous is t mobile US and has green send key red end key, and its very important to know which it is)
Click to expand...
Click to collapse
It's a T-mobile HD2. She started trying to flash Android on it and got cLK 1.14 but couldn't progress from there.
well i cant really help with the next steps, cos ive never used cLK, its a bit too advanced for me, give me teh simplicity of magldr any day.
You didnt explain the errors tho, , i mean, if you have cLK installed, you should be using fastboot to flash cwm next i think, whereas teh error you describe sounds like you are trying to flash with teh phone in bootloader(stripey screen)?
samsamuel said:
well i cant really help with the next steps, cos ive never used cLK, its a bit too advanced for me, give me teh simplicity of magldr any day.
You didnt explain the errors tho, , i mean, if you have cLK installed, you should be using fastboot to flash cwm next i think, whereas teh error you describe sounds like you are trying to flash with teh phone in bootloader(stripey screen)?
Click to expand...
Click to collapse
Well, I've got Magldr installed, CWM is now on there and from there I'm set. Currently flashing (trying to at least) NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7).
EDIT: holy ****, that was fast. I currently see an HTC logo...wondering if first boot takes awhile like most...and disregard. It's now loading. Success! Thanks for the links/guides everyone! This is why XDA is the best.
Congrats on your restoration f the HD2!
BTW she can dual Boot the HD2 if she likes
SynGamer said:
Well, I've got Magldr installed, CWM is now on there and from there I'm set. Currently flashing (trying to at least) NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7).
EDIT: holy ****, that was fast. I currently see an HTC logo...wondering if first boot takes awhile like most...and disregard. It's now loading. Success! Thanks for the links/guides everyone! This is why XDA is the best.
Click to expand...
Click to collapse
Haha, that was exactly my reaction on first boot Glad to see you got it sorted out
Hey, my sister got a HD2 off ebay, and asked me to flash it to android, so i got to the point of installing MAGLDR, and after it successfully flashes, it doesn't boot into it, it just hangs on the HTC boot logo. I used to have a HD2, but it came pre-flashed with android.
I have flashed it with HardSPL too, before you ask.
how long did you wait? sometimes it takes 10+minutes before it boots.
did you try an SD version? it also boots via Magldr.
What steps did you take?
Did you task29 before flashing magldr?
My advice get the hd2 nand toolkit and Task29 before Flashing magldr
http://forum.xda-developers.com/showthread.php?t=1090783
Symptom - Flashed magldr folowed by hanging at splashscreen and not entering magldr menu.
Cause - nearly always caused by forgetting that magldr WILL ONLY start when spl =2.08.hspl -AND- radio is tmous compatible (meaning 2.07.50 or higher, where the .50 is not. 51,,, 2.08.50 will work 2.08.51 wont)
Go flash radio 2.15.50 and whilst you are in bootloader check what the spl line says.
I think i forgot the radio flash, will try it tomorrow.
You have to be careful with the Radio flashing. It is a good way of bricking your phone. I have had the same radio on my HD2 since I got it and never needed to change it. I have ICS running on it now and I am still on the same radio. You may have used the wrong version of HSPL when you flashed that portion. I would make it stock and start from scratch...follow this guide to make it stock and start from the begining.
http://www.jayceooi.com/2011/08/15/how-to-restore-stock-rom-on-htc-hd2-video/
You only need to worry about flashing an incompatible radio with TMOUS phones, and as far as I know you shouldn't ever need to change the radio of those for Android anyway, so everything should be fine.
Sent from my HTC HD2 using XDA
Nigeldg said:
You only need to worry about flashing an incompatible radio with TMOUS phones, and as far as I know you shouldn't ever need to change the radio of those for Android anyway, so everything should be fine.
Sent from my HTC HD2 using XDA
Click to expand...
Click to collapse
Actually, I don't think the OP mentioned the type of HD2. It could be either us or int.
Sent from my HTC View in LALA land.
Updated the radio, worked fine.
thanks for the help guys
stevedebi said:
Actually, I don't think the OP mentioned the type of HD2. It could be either us or int.
Sent from my HTC View in LALA land.
Click to expand...
Click to collapse
We can safely assume he's got an EU phone as not only is he from the UK but he's got a .51 radio (Android isn't booting), and I think that all of the TMOUS phones come stock with a .50 radio (or bricked )
Same Problem
I know...I know I'm about to get a beat-down for not reading the forums properly on xda but, there's soo much information that I don't know where to start! It will be much appreciated if someone can help:
I got a HTC HD2 on T-Mobile (UK) - I have the one that reads 448mb of RAM
It has the latest official ROM since it was downloaded from the HTC site (site link no longer available)
The radio version is 2.15.50.14
I have also installed HSPL (it reads SPL-3.03.HSPL)
Tried to install MAGLDR via the HD2 Android NAND Toolkit
Now my phone wont bootup....just stuck at the loading screen (the pink circle arrow)
What do I do? :-s
You need hspl 2.08 to do install magldr!
clk works with 3.03.
I
Sent from my NexusHD2 using xda premium
If you know you're going to get flamed for not reading properly, surely the logical thing to do would be to go back and start reading properly? As shanman said, MAGLDR requires HSPL2.08 which you would have realised if you read any one of the numerous guides available (e.g. the one in my sig).
Nigeldg said:
MAGLDR requires HSPL2.08 which you would have realised if you read any one of the numerous guides available (e.g. the one in my sig).
Click to expand...
Click to collapse
or even sentence 4 of post 1 in the magldr thread, , , nice bold lettering.
my volume buttens doesnt work at all, i accedently tare them apart when i replaced the digitizer screan.
the phone is still on WM
so in order to flash android i will have to navigate to rd recovery, and then to flash the touch recovey (that is challenge by it self)
so... any one can help me?
How do you have recovery AND WM ? Don't you need MAGLDR or cLK for a recovery? And you can't have those with wm?
in cLK, hold the "Home Button" .. in MAGLDR, I don't think it's possible. (Or is it?)
if i understand the question, the OP is running WM on the hd2, which has defective volume buttons.
because it does not yet have magldr or clk, booting the phone into BOOTLOADER will be necessary to get things going. the preferred way of entering into BOOTLOADER involves powering on the device with volume down pressed.
however, if i remember correctly, starting the CustomRUU on your pc while usb is connected to phone and the phone is fully booted into WM will do the following:
1. reboot into BOOTLOADER
2. flash the contents of the CustomRUU
if i am remembering my hd2 basics correctly, i guess you could flash CLK+TouchRecovery using the package in the first post of this thread:
http://forum.xda-developers.com/showthread.php?t=1769081
i think that package contains ONLY the contents to be flashed, so you will need the rest of the files of CustomRUU beforehand (the EXE file, etc, etc).
you don't mention if your device has HSPL or not. i seem to have forgotten the steps for installing HSPL but if ANY step REQUIRES (no alternative) booting into BOOTLOADER manually, then you will be stuck with no way forward!
also, i think once you get CLK+TouchRecovery+Android flashed to your NAND, then i think CustomRUU won't work with regards to Point 1 (mentioned above). so you might have trouble executing most use cases of HD2 Toolkit.
finally, i think the partitioning steps using CLK+TouchRecovery will REQUIRE use of the volume keys, because partitioning is done inside CLK using the CLK menus which work with volume keys only! so you might be limited to android ROMs that fit into the DEFAULT CLK partitioning! :crying:
get the buttons fixed and you and i won't have to wrack our brains so much! good luck!
ASCIIker said:
starting the CustomRUU on your pc while usb is connected to phone and the phone is fully booted into WM will do the following:
1. reboot into BOOTLOADER
2. flash the contents of the CustomRUU
Click to expand...
Click to collapse
@OP, be REALLY careful before you dive straight in, because unless its a winmo rom or a radio, doing this will mean there is NO way for you to get into bootloader, since there wont be any winmo installed any more.
So, there probably is a way to do it and end up with a successful install, but you have to be REALLY sure of the steps, and do it all in one go, , you wont get a second chance.
if the phone isnt on 3.14 winmo, or a tmous, then the first thing you need to do is switch radio before you lose winmo, since it must be flashed from bootloader, meaning you need to get into bootloader at least twice. Do 2.08.hspl first, then the radio, and only then consider removing winmo.
I say again, be really carefull and absolutely sure of what steps you take.
samsamuel said:
@OP, be REALLY careful before you dive straight in, because unless its a winmo rom or a radio, doing this will mean there is NO way for you to get into bootloader, since there wont be any winmo installed any more.
So, there probably is a way to do it and end up with a successful install, but you have to be REALLY sure of the steps, and do it all in one go, , you wont get a second chance.
if the phone isnt on 3.14 winmo, or a tmous, then the first thing you need to do is switch radio before you lose winmo, since it must be flashed from bootloader, meaning you need to get into bootloader at least twice. Do 2.08.hspl first, then the radio, and only then consider removing winmo.
I say again, be really carefull and absolutely sure of what steps you take.
Click to expand...
Click to collapse
TOTALLY agreed! i tried to write my post to highlight all the numerous possible pitfalls, but i might have made it sound like a series of easy steps. things quite often DO go wrong, and i will also reiterate that you just might get stuck due to a minor mistake.
i guess what we are all trying to tell the OP is it is better to be safe than sorry. you presently have a working hd2 (with WM) and it is indeed too risky to proceed to switching to android with dead volume buttons. so better to get them fixed first and then you won't have to worry about laying down a plan that could be as complex as a long term chess game!
Sorry for misguiding you guygs. The phone already have HSPL and maglr 1.13 and even runing andrdoid.
From that point, how can i flash the touch recovery?
This is my brother phone so i just saw the device, he cant tell the difrance between wm and android lol
Sent from my HTC Sensation Z710e using xda premium
havlaz said:
This is my brother phone so i just saw the device, he cant tell the difrance between wm and android lol
Sent from my HTC Sensation Z710e using xda premium
Click to expand...
Click to collapse
I would recommend that u dont flash the stock rom again until u know how many bad blocks u have. I have 5 bad blocks, I regret changing my partion sizes ( windows mobile and windows phone os change size during installation) Just tell him that is can get messed up and just search on youtube for videos of hd2 with wm.
I have hd2 rooted magldr 1.13 on it, and I'm usually installing NAND roms(becouse I have slow 4GB class 4 card) and non of them are good, I don't know what am I doing wrong or all of roms are unstable and a lot of thing are not working(I read what is working, and what is not in thread of ROM that I am installing). Almost every time I have problem with signal streight and mobile network. I install last version of radio I tried previous version of it two, and still same. I am currently searching for some stable rom with Sense and version 2.3.5 or later version, so If you can suggest me some that would be great. I did search for them but as I said they were all unstable, camera was awful picture was falling apart, that thing with signal and mobile network. Only thing that I didn't try was returning him to windows mobile OS to see if that things happend there two.
anyone ? I mean 100 looks, and no one knows...
Thermaltake868 said:
anyone ? I mean 100 looks, and no one knows...
Click to expand...
Click to collapse
try Energy sense 3.5 rom. you may have bad blocks
and try windows mobile.
gilbert32 said:
try Energy sense 3.5 rom. you may have bad blocks
and try windows mobile.
Click to expand...
Click to collapse
I was trying to run mtty but it said that "usb can not be open" so I don't know what to do.
Thermaltake868 said:
I was trying to run mtty but it said that "usb can not be open" so I don't know what to do.
Click to expand...
Click to collapse
that's because mtty drivers are not installed/set up correctly on your computer. but why going for mtty?
just enter bootloader and flash the ruu from pc and see if your problem persists
gilbert32 said:
that's because mtty drivers are not installed/set up correctly on your computer. but why going for mtty?
just enter bootloader and flash the ruu from pc and see if your problem persists
Click to expand...
Click to collapse
I am in the process of installing energy rom now. Can you tell me do I have to do task29 if I'm coming from another ROM every time I want to install other rom or just do a DFT from that rom that I'm installing ?
you can task29 using hd2 toolkit.
you can also use it to partition your phone as needed
gilbert32 said:
you can task29 using hd2 toolkit.
you can also use it to partition your phone as needed
Click to expand...
Click to collapse
I know that. But do I have to do task29 every time I install different rom or just DFT is enough ?
Thermaltake868 said:
I know that. But do I have to do task29 every time I install different rom or just DFT is enough ?
Click to expand...
Click to collapse
it is RECOMMENDED but not NECESSARY. i did it 1-2 times till now (celebrating a year of flashing roms 4 times/week)
by DFT do you mean repartitionning? if so, yes. it's enough