Related
hii, I am a user of Galaxy Y S5360 also a new comer member of this site, guys please help me. Well now tell you myphone was in good condition. last night I installed creed's rom 3.5,(before installing it I had Ultimate Sonic Rom). as usual I did every steps properly but while the logo is caming after rebooting the phone (Samsung Galaxy Y) its stuck, I waited for 5 hrs but still same.. So I removed the battery and turn the phone again and do the steps again but no effect still the same its stuck.. Guys please help me out from this situation? Can any one tell me why it happening? though I did properly. . . . Thanks for your listening.
why it stuck after rebooting, while other Rom works properly? Or Can I never installed creed's rom 3.5 in my phone? please help.
one of my friend was told me about some process that CWM recovery and some Nandroid backup, (but as I dont did before), So I dont understand, dont get that point exactly.
Can you please show me a way, What should I do now?
have you tried reverting to stock with odin and then flashing again?
i've this sort of problem when flashing to other ROMs whenever the ROM i was on had a non-stock kernel
in any case hope this will help you
People often dont follow the exact steps to install a ROM and get stuck on splash screen. This applies for ALL ROMs.Follow this exactly. If that doesnt work, let me know
1) Boot to Stock recovery mode by holding power+Home+volume Up
2) Wipe Data(factory reset)+cache
3) Click Install from sd card
4) Select the CWM by madteam or by skin 1980
5) In CWM, again wipe data+cache
6) Select Install from sd card and select creeds rom (any ROM its the same procedure)
7) Reboot after the process completes
8) Wait 4-5 mins max if the ROM get booted up, if it boots up ignore all the steps below, your installation is complete (since some ROMs need the next steps and some dont need).
9) Else, Go to stock recovery mode again (dont worry, pull the battery and insert, just keep on holding the combo buttons and try till the recovery comes)
10) Wipe Data+Cache ( DONT DO IN CWM only in STOCK and DONT flash anything!)
11) Reboot and wait if the ROM loads up.
If it still gets stuck on splash logo, you need to flash back to stock and try again. Refer this post for how to do that. Download the latest firmware of your region and follow the steps given in post 2 :
http://forum.xda-developers.com/showthread.php?t=1465800
thanks for supporting
TaroLaw said:
have you tried reverting to stock with odin and then flashing again?
i've this sort of problem when flashing to other ROMs whenever the ROM i was on had a non-stock kernel
in any case hope this will help you
Click to expand...
Click to collapse
Glad to have such adorable answer, but sorry I dont flashing or reverting via odin (as I said I dont dis before), but in galaxyyoung website they provies every steps for intalling rom's, I followed them..
well can you tell me how can I flash via odin????
thanks again..
Many Many Thanks
hitme987 said:
People often dont follow the exact steps to install a ROM and get stuck on splash screen. This applies for ALL ROMs.Follow this exactly. If that doesnt work, let me know
1) Boot to Stock recovery mode by holding power+Home+volume Up
2) Wipe Data(factory reset)+cache
3) Click Install from sd card
4) Select the CWM by madteam or by skin 1980
5) In CWM, again wipe data+cache
6) Select Install from sd card and select creeds rom (any ROM its the same procedure)
7) Reboot after the process completes
8) Wait 4-5 mins max if the ROM get booted up, if it boots up ignore all the steps below, your installation is complete (since some ROMs need the next steps and some dont need).
9) Else, Go to stock recovery mode again (dont worry, pull the battery and insert, just keep on holding the combo buttons and try till the recovery comes)
10) Wipe Data+Cache ( DONT DO IN CWM only in STOCK and DONT flash anything!)
11) Reboot and wait if the ROM loads up.
If it still gets stuck on splash logo, you need to flash back to stock and try again. Refer this post for how to do that. Download the latest firmware of your region and follow the steps given in post 2 :
http://forum.xda-developers.com/showthread.php?t=1465800
Click to expand...
Click to collapse
Truely said, people dont often follow exactly process. like me, but my respectable friend I am simply novice(im-mature) about these, So just followed the process from a website (named galaxyyoung), according to them, simply I followed thier procedure.
you have gave me right process.. very very thanks:good::good::good: glad to know.
I hppe it'll work properly.. thanks once again.
Jst install d stock rom and flash creed 3.5 from normal recovery not in CWM....
Even i was facing d same problem.....
U cn type "how to flash galaxy y via odin" and select the blog given by mobtech....u ll get the process of installing stock via odin there....try it.....
Sent from my GT-S5360 using xda premium
Preeyam said:
Truely said, people dont often follow exactly process. like me, but my respectable friend I am simply novice(im-mature) about these, So just followed the process from a website (named galaxyyoung), according to them, simply I followed thier procedure.
you have gave me right process.. very very thanks:good::good::good: glad to know.
I hppe it'll work properly.. thanks once again.
Click to expand...
Click to collapse
Link to docky sir's thread
http://forum.xda-developers.com/showthread.php?t=1465800
follow all the steps given EXACTLY
it happened with me also. i just flashed sgy via odin. some rom may get softbrick while flashing..
Creed's 3.5 would mostly work if flashed from stock rom. my suggestion should be to start from stock rom using odin and the flash creed's 3.5 since creeds is using a different kernel that does not support flashing from some custom roms
-------------------------
iplaygalaxyy for android
julieanndondie said:
Creed's 3.5 would mostly work if flashed from stock rom. my suggestion should be to start from stock rom using odin and the flash creed's 3.5 since creeds is using a different kernel that does not support flashing from some custom roms
-------------------------
yes he is right & i totally agree with him
Flash a Stock rom first using Odin ( use a stock rom of your region & correct model)
& then use recovery to install Creed's 3.5
because some custom kernels do not allow other kernels to be installed over them
so this results in boot loop (soft brick)
Click to expand...
Click to collapse
pls pls help!!
yesterday i installed creedv3.5 rom on my samsung galaxy y before that i was using stock rom. Now when i plug in my earphones nothing happens, my phone is not detecting my earlids please help.....
Creed 3.5 does not have their own kernel, so one can easilly swap from any rom(Stock R custom) without ODIN flash..
The only thing you have to do is Do Wipe Cache And also wipe dalvik cache in CWM
Thats enough..
Hello Every One ..
I want to install merruk kernel 2.5 on hyperion rom 7.x .
I tried my best, but got failed.
First listen to me.
Iam not a noob, I have used merruk kernel 2.5 with cod rom .
I know the whole procedure.
I am doing the same.
I want to tell 1 thing more, that is, i can't install merruk 2.0 too :/
when i flash it via CMW, it says installation done, completed etc..
but in settings it stil shows savie :S
having savie, and keeping backup, i installed merruk kernel 2.5, and then restored system, data, cache, .. all got fine :S
but nothing happend after boot logo :S
it stucked. i did my best.. nOw what to do. plz tell me !
DO NOT REBOOT after and every flashing
follow this,,
1-AT FIRST COPY THE below FILES TO SDCARD'S ROOT
2. EXTRACT boot.img FILE FROM Merruk Technology 2.0.tar To sd card Root
3. GO TO RECOVERY MODE THEN GO CMW RECOVERY
4. IN CMW CHOOSE install zip from SdCard SELECT kernel update.zip AND FLASH IT. (it will search boot.img and flashes it automatically)
3. BACKUP YOUR ROM IN CMW (after finished DO nOT REBOOT)
5. IN CMW FLASH Elite-modules.zip (DO NOT REBOOT)
6. NOW FLASH Ext4-Converter-signed.zip in CMW.(this is the merruk2.5) DO NOT REBOOT
8. In Cmw GO TO backup/restore
»Select Advance Restore
» Restore System , data & cache
Do Not Restore boot img and sd-ext. (AFTER FINISHED the 3 FILES,, DO NOT WIPE DATA AND CACHE)
9. Now Reboot system .
10. Check About Phone.
kimerika said:
DO NOT REBOOT after and every flashing
follow this,,
1-AT FIRST COPY THE below FILES TO SDCARD'S ROOT
2. EXTRACT boot.img FILE FROM Merruk Technology 2.0.tar To sd card Root
3. GO TO RECOVERY MODE THEN GO CMW RECOVERY
4. IN CMW CHOOSE install zip from SdCard SELECT kernel update.zip AND FLASH IT. (it will search boot.img and flashes it automatically)
3. BACKUP YOUR ROM IN CMW (after finished DO nOT REBOOT)
5. IN CMW FLASH Elite-modules.zip (DO NOT REBOOT)
6. NOW FLASH Ext4-Converter-signed.zip in CMW.(this is the merruk2.5) DO NOT REBOOT
8. In Cmw GO TO backup/restore
»Select Advance Restore
» Restore System , data & cache
Do Not Restore boot img and sd-ext. (AFTER FINISHED the 3 FILES,, DO NOT WIPE DATA AND CACHE)
9. Now Reboot system .
10. Check About Phone.
Click to expand...
Click to collapse
First of all thnx for helping me!
2ndly, i did the same steps on hyperion rom 7.x
( NO REBOOTS )
but still got the same boot loop, i mean I waited for 5 mins, but nothing happened.
Then i tried to install the merruk kernel of Hyperion 7 GM FINAL.
I did the same as u told, but when i was restoring the system, it gave an error.
Now Iam again flashing Hyperion 7.X and again flashing Merruk Kernel.
this i will wait for 10 - 15 mins after applying the whole procedure. Lets pray :S
WOOOOHOOOOOOO ! !!!
MAN.. I think, ur procedure was wrong..
I simple flashed hyperion rom 7.x
then made its backup.. and then installed merruk kernel 2.5 and elite modules ..
and then restored sytem data cache..
and boot succeed
THANX ALOT ...
ok...ok....ok..
i think u just right,,,one xda member flash the same way just like yours and he did succed,,
but i my case i use my steps to hyperion and ussr and i succed,,
on the second thought,, maybe MT2.0 PRE is not required to flash after all,because MT2.5 ext4 converter signed.zip has a boot.img..LOL
what do you think,,
my procedures is took by mai,,
Yeah Rite.. btw tell me 1 thing, is there any solution of this..
when iam over with my mob, and make it lock, (SCREEN OFF) , then when i press the menu button , it takes more tym to show the screen. why is that so :S and how to overcome it.. iam using cpu tuner ..
that normal,, cause mt2.5 has wakeclock issue
mastiyard said:
WOOOOHOOOOOOO ! !!!
MAN.. I think, ur procedure was wrong..
I simple flashed hyperion rom 7.x
then made its backup.. and then installed merruk kernel 2.5 and elite modules ..
and then restored sytem data cache..
and boot succeed
THANX ALOT ...
Click to expand...
Click to collapse
Even i couldnt make it work with hyperion or ussr
Correct me if im wrong
1 flash rom
2 backup
3 install mt 2.5 and elite modules without reboot
4 restore system, data, cache
Is there anything else i need to.do?
Sent from my GT-S5360 using xda app-developers app
shubhs4frndz said:
Even i couldnt make it work with hyperion or ussr
Correct me if im wrong
1 flash rom
2 backup
3 install mt 2.5 and elite modules without reboot
4 restore system, data, cache
Is there anything else i need to.do?
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
you forgot 1, ext4 converter-signed.zip,,,that include MT2.5 which have the freq of 1.248MH..
follow my TUT above
shubhs4frndz said:
Even i couldnt make it work with hyperion or ussr
Correct me if im wrong
1 flash rom
2 backup
3 install mt 2.5 and elite modules without reboot
4 restore system, data, cache
Is there anything else i need to.do?
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Man if u are not succeeded with the procedure of SENIOR MEMBER. Than follow me..
flash the rom, then boot it 1 time..
than backup it..
then install elite modules, and ext4_signed.zip.
then reboot the recovery..
now restore system cache and data..
and you will be succeeded, indeeeeed .
kimerika.. tell me 1 thing man ..
now i want some customization in my STATUS BAR..
i want yellow colored battery icon and signal and wifi icon..
what the problem is, i tried status bar greper 1.8, and found some icons for signal and battery from the internet..
But due to status bar greper 1.8 , i can't change wifi icon :S
and with some patches that include status bar greper 1.8, by them, wifi icon gets hide :S i can't see it on the status bar..
leave it..
just help me in getting yellow coloured battery icon, signal icon and wifi icon :/
My own !
When i flashed Hyperion 7 GM i first go on overclocking...
So this is the procedure i did...:laugh:
1.Download PDA_merruk.tar and Ext4 converter.zip
2.Place Ext4 converter.zip in the root of your SD Card and place PDA_merruk.tar to your computer...(anywhere you like!)
3.Boot into CWM
4.Go to Backups and Storage and do a Backup
5.Go to Install zip from SD Card and choose zip from SD Card
6.Find Ext4 converter.zip
7.Flash it ! :laugh:
8.After that reboot
9.It will stuck on bootlogo so don't worry just remove the battery and insert it again..
10.Go to ODIN Mode (Volume Down,Home Key and Power Button)
11.Then press Volume up when the ODIN Mode shows up..
12.Get your USB Cable then insert it to your computer...
13.When you see the 0:[COM:XX] it means that your SGY is connected
14.Go to PDA then choose PDA_merruk.tar
15.Then press START
16.After that it will say PASS! and remove your SGY
17.You will need to remove and insert your battery again
18.Use the three button combo !
19.You will see the permanent CWM..
20.Go to Backups and Restore and Choose Advance Restore then choose the backup that day then restore system ONLY!
21.After the Restore go Wipe Data/Factory Reset
22.Wipe Cache
23.Go to Advanced then choose Wipe Dalvik Cache
24.Wide Battery Stats
25.Reboot system then you are good to go !
Works Always and NEVER fails me ! (works also on stock ROM!)
You will also get overclocked after doing this steps BTW !
Notes :
1.Must have 100% battery life
2.Must have ODIN 1.85
3.Must have Samsung Drivers
You can all get these files from Mr. Google
Required files :
Ext4 converter.zip
PDA_merruk.tar
ODIN 1.85
Samsung Drivers
Search them by USing Mr. Google.....
Hey Guys,
i have a problem with flashing custom recovery on my I9505(jfltexx).
When i flash "DBT-I9505XXUBMEA-20130601103235" via Odin and in addition the "CF-Auto-Root-jflte-jfltexx-gti9505" my phone boots up, most of the time but not all the time. Now when i try to flash custom Recovery via Odin, my phone stucks at the Samsung Galaxy Logo and it wont continue. Even if i enter the standard recovery from Goomanager and i select "reboot system now" it stucks on the Logo!
Any Help?
Thanks in Advance
Faschoda said:
Hey Guys,
i have a problem with flashing custom recovery on my I9505(jfltexx).
When i flash "DBT-I9505XXUBMEA-20130601103235" via Odin and in addition the "CF-Auto-Root-jflte-jfltexx-gti9505" my phone boots up, most of the time but not all the time. Now when i try to flash custom Recovery via Odin, my phone stucks at the Samsung Galaxy Logo and it wont continue. Even if i enter the standard recovery from Goomanager and i select "reboot system now" it stucks on the Logo!
Any Help?
Thanks in Advance
Click to expand...
Click to collapse
U can try going to Stock or The recovery u installed which ever u are able to open
Just wipe cache & reboot
It should work well if this does not work
Flash a pre rooted firmware
http://forum.xda-developers.com/showthread.php?t=2255190&highlight=pre+rooted+i9505
And flash PHILZ recovery 100 % there wont be any problem and ya after flashing a firmware do Reset from the device and then flash recovery
123hiten said:
U can try going to Stock or The recovery u installed which ever u are able to open
Just wipe cache & reboot
It should work well if this does not work
Flash a pre rooted firmware
http://forum.xda-developers.com/showthread.php?t=2255190&highlight=pre+rooted+i9505
And flash PHILZ recovery 100 % there wont be any problem and ya after flashing a firmware do Reset from the device and then flash recovery
Click to expand...
Click to collapse
Yeah but thats the problem. I can't enter the recovery mode and when i try to flash a PRE-rooted rom from djembey my device stuck at the BootLogo.
In a nutshell: There is no option performing a wipe!
Faschoda said:
Yeah but thats the problem. I can't enter the recovery mode and when i try to flash a PRE-rooted rom from djembey my device stuck at the BootLogo.
In a nutshell: There is no option performing a wipe!
Click to expand...
Click to collapse
do not enter the recovery from and app
to enter a recovery power off device unplug it
press volume up + home + power all together till samsung logo appear and realease it
U will have a stock recovery or the one u installed
from there u will have factory reset and wipe cache bth option
let me know or some images u get would be more easy for us to help you with
123hiten said:
do not enter the recovery from and app
to enter a recovery power off device unplug it
press volume up + home + power all together till samsung logo appear and realease it
U will have a stock recovery or the one u installed
from there u will have factory reset and wipe cache bth option
let me know or some images u get would be more easy for us to help you with
Click to expand...
Click to collapse
Thanks for your effort. But i have to tell you the whole Story.
Yesterday i wanted to install the PA-Rom from verttigo. Before i was on the OMEGA 6.0 Version with Ktsoonez custom kernel. So i entered the recovery mode, did a backup, Full-Wipe, and then the huge MISTAKE, I formatted data and system and everything was gone. No Backup i could reinstall nor a ROM i could install. Than my phone rebooted and stucked at the samsung Logo. So i thought the F shall i do?!?!
I entered the download Mode and tried to install the prerooted Rom from djembey but i stucked also on the samsung logo. Since than im sitting in front of my Phone crying!
Faschoda said:
Thanks for your effort. But i have to tell you the whole Story.
Yesterday i wanted to install the PA-Rom from verttigo. Before i was on the OMEGA 6.0 Version with Ktsoonez custom kernel. So i entered the recovery mode, did a backup, Full-Wipe, and then the huge MISTAKE, I formatted data and system and everything was gone. No Backup i could reinstall nor a ROM i could install. Than my phone rebooted and stucked at the samsung Logo. So i thought the F shall i do?!?!
I entered the download Mode and tried to install the prerooted Rom from djembey but i stucked also on the samsung logo. Since than im sitting in front of my Phone crying!
Click to expand...
Click to collapse
Ok now i get it as per what i see i can still get your device back to normal but myte take multiple try rest assured it will work
1st flash a stock firmware again (not rooted pure stock) this time using pit file along with firmware
and while flashing the firmware using odin and pit do check re-partition also
Note with out pit file do not check the re-partition box
and once the flashing is done device should boot if its not booting
go to stock recovery like how i told u earlier and do factory reset and wipe cache
and reboot
and tell me the status.. all the best
http://forum.xda-developers.com/showthread.php?t=2265477&highlight=stock+firmware get pit file/ stock firmware from here for ur variant
123hiten said:
Ok now i get it as per what i see i can still get your device back to normal but myte take multiple try rest assured it will work
1st flash a stock firmware again (not rooted pure stock) this time using pit file along with firmware
and while flashing the firmware using odin and pit do check re-partition also
Note with out pit file do not check the re-partition box
and once the flashing is done device should boot if its not booting
go to stock recovery like how i told u earlier and do factory reset and wipe cache
and reboot
and tell me the status.. all the best
http://forum.xda-developers.com/showthread.php?t=2265477&highlight=stock+firmware get pit file/ stock firmware from here for ur variant
Click to expand...
Click to collapse
So let me get this clear. In Odin i should check the stock Rom in PIT instead of PDA? And check the Re-Partion box?
Faschoda said:
So let me get this clear. In Odin i should check the stock Rom in PIT instead of PDA? And check the Re-Partion box?
Click to expand...
Click to collapse
In Odin
PDA - u should select firmware stock one
PIT - select pit file
Re- partition should be check follow the image and flash
If Re-Partition is checked u must have pit file also do not forget that else u myte brick ur device
Faschoda said:
Thanks for your effort. But i have to tell you the whole Story.
Yesterday i wanted to install the PA-Rom from verttigo. Before i was on the OMEGA 6.0 Version with Ktsoonez custom kernel. So i entered the recovery mode, did a backup, Full-Wipe, and then the huge MISTAKE, I formatted data and system and everything was gone. No Backup i could reinstall nor a ROM i could install. Than my phone rebooted and stucked at the samsung Logo. So i thought the F shall i do?!?!
I entered the download Mode and tried to install the prerooted Rom from djembey but i stucked also on the samsung logo. Since than im sitting in front of my Phone crying!
Click to expand...
Click to collapse
Based on what you said, it seem like you still have all the partitions intact. Just that they are empty right now.
Did you do a full backup before all this problem happen? Or did you do a custom backup?
Are your backups stored in external memory and is a full backup? If so, try using custom recovery to restore your backup?
123hiten said:
In Odin
PDA - u should select firmware stock one
PIT - select pit file
Re- partition should be check follow the image and flash
If Re-Partition is checked u must have pit file also do not forget that else u myte brick ur device
Click to expand...
Click to collapse
lzk123 said:
Based on what you said, it seem like you still have all the partitions intact. Just that they are empty right now.
Did you do a full backup before all this problem happen? Or did you do a custom backup?
Are your backups stored in external memory and is a full backup? If so, try using custom recovery to restore your backup?
Click to expand...
Click to collapse
That's Bull****. Nothing worked -.-
Faschoda said:
That's Bull****. Nothing worked -.-
Click to expand...
Click to collapse
Chill. Your phone is definitely not bricked. I encountered your problem before when i was experimenting with something.
- Right now, boot to whatever recovery that you have. Try to wipe cache, dalvik, and any other partition if possible.
- After that, boot to download mode and try to flash STOCK rom using odin. Check that flash was success.
- Try to boot your phone and report here on what happens.
Edit: You might want to consider restarting your computer and changing usb port. "Faulty" Usb port will affect the flashing part.
lzk123 said:
Chill. Your phone is definitely not bricked. I encountered your problem before when i was experimenting with something.
- Right now, boot to whatever recovery that you have. Try to wipe cache, dalvik, and any other partition if possible.
- After that, boot to download mode and try to flash STOCK rom using odin. Check that flash was success.
- Try to boot your phone and report here on what happens.
Click to expand...
Click to collapse
Again thanks for your effort! Much appreciated!
HOOOOOOOOOOOOOOOOOOOOOOOOLLLYYY C*****************************************************!!!
That worked. It boots now!!!!!!
Faschoda said:
Again thanks for your effort! Much appreciated!
HOOOOOOOOOOOOOOOOOOOOOOOOLLLYYY C*****************************************************!!!
That worked. It boots now!!!!!!
Click to expand...
Click to collapse
Glad to hear that.
Remember to always make a nandroid backup! I recommend using Philz Touch Recovery
lzk123 said:
Glad to hear that.
Remember to always make a nandroid backup! I recommend using Philz Touch Recovery
Click to expand...
Click to collapse
How shall i install custom recovery? Via Odin or can i boot into stock recovery and apply update from there?
Faschoda said:
How shall i install custom recovery? Via Odin or can i boot into stock recovery and apply update from there?
Click to expand...
Click to collapse
Download the .tar file of the custom recovery. Flashed it through odin, at the PDA section.
Faschoda said:
That's Bull****. Nothing worked -.-
Click to expand...
Click to collapse
Behave your speech smart guy, they are trying to help!
general rule on how to fix a bootloop:
1- Wipe data and cache. If not,
2- Restore a nandroid backup if available. If not,
3- Flash stock firmware, If not,
4- Flash stock firmware with pit file (you can try pit file alone).
samersh72 said:
Behave your speech smart guy, they are trying to help!
general rule on how to fix a bootloop:
1- Wipe data and cache. If not,
2- Restore a nandroid backup if available. If not,
3- Flash stock firmware, If not,
4- Flash stock firmware with pit file (you can try pit file alone).
Click to expand...
Click to collapse
Soooorrry! Wasn't meant in an offensive Way!
Faschoda said:
Soooorrry! Wasn't meant in an offensive Way!
Click to expand...
Click to collapse
NVM, no problem
Glad that u got ur device back my friend i knew its just a matter of time b4 we give up
Here on instead of creating new thread please put it in Q&A thread u ll have many people giving u faster solutions the link is in my signature
All the Best :good:
hi guys , my lg g2 wont run , ive cwm recovery installed , i was playin in the hidden menu 3485#*802# , there was an option ''factory reset'' i clicked that , the phone rebooted and went to cwm recovery automatically , i treid turning off again but same issue , i wiped data , cacnhe everythin , even flashed custom rom again ehich i had in sd card but stil its stucked in cwm recovery menu when turn it on :'( pls help guys im so worried
pw1nce said:
hi guys , my lg g2 wont run , ive cwm recovery installed , i was playin in the hidden menu 3485#*802# , there was an option ''factory reset'' i clicked that , the phone rebooted and went to cwm recovery automatically , i treid turning off again but same issue , i wiped data , cacnhe everythin , even flashed custom rom again ehich i had in sd card but stil its stucked in cwm recovery menu when turn it on :'( pls help guys im so worried
Click to expand...
Click to collapse
What happens when you boot to download mode then reboot from there? Will it break the boot loop? CWM is wonky with this phone btw, you should be using TWRP. Or you can revert back to stock and redo the phone, or maybe push a new recovery image via adb and see if that corrects the issue.
x714x said:
What happens when you boot to download mode then reboot from there? Will it break the boot loop? CWM is wonky with this phone btw, you should be using TWRP. Or you can revert back to stock and redo the phone, or maybe push a new recovery image via adb and see if that corrects the issue.
Click to expand...
Click to collapse
bro im new to these things , would you kindly pleas help me in xplaining whch steps to follow , i really will be so thankfull
Follow the guide provided http://forum.xda-developers.com/showthread.php?t=2432476
Even if you solve your problem with something else.
Learn how to go back to stock, you probably gonna need it one day.
Sent from my LG-D802 using XDA Premium 4 mobile app
I've recently updated my phone to the unofficial CM 13 , and now that the official android 6.0 for my phone is released I wanted to update to it. The problem is that the official way of updating is holding both volume buttons and power button while phone is turned off, but that takes me to the recovery of the installed CM13. I tried flashing the stock recovery, and the furthest i got was that the installation began , but got stuck at 0 %.
Note that when I tried installing CM13 , there was a problem with the package identifying my device, so i searched and found out that i can skip the device check, once i did that i could install CM13, but when i go to about phone in settings , i find that device type is unkown.
Install the custom CWM recovery then wipe davlik cache, power off phone and then try to flash stock ROM
kamilb365 said:
Install the custom CWM recovery then wipe davlik cache, power off phone and then try to flash stock ROM
Click to expand...
Click to collapse
How can I flash the stock rom with CWM , because I believe it's only flashable with the stock recovery , and I tried flashing it with the stock recovery but it didn't work .
You dont need the stock recovery. Just boot into CWM or TWRP and wipe cache & davlik cache.
Then power off the phone. When its off hold the power button and the + and - buttons.
When the Huawei Ascend logo shows up let go of the power button and keep holding the + and - buttons until the installation screen shows up.
Take off the case off the phone if you have any.
kamilb365 said:
You dont need the stock recovery. Just boot into CWM or TWRP and wipe cache & davlik cache.
Then power off the phone. When its off hold the power button and the + and - buttons.
When the Huawei Ascend logo shows up let go of the power button and keep holding the + and - buttons until the installation screen shows up.
Take off the case off the phone if you have any.
Click to expand...
Click to collapse
Whenever I try to do that it gives me an error, the error doesn't even stay enough time to be read.
Just to add that you should have an apdate.app file in folder called dload on external SD card for you to be able to flash it back to stock if you have done that already not sure ??
Sparko612 said:
Just to add that you should have an apdate.app file in folder called dload on external SD card for you to be able to flash it back to stock if you have done that already not sure ??
Click to expand...
Click to collapse
yeah , its not my first time flashing a rom
You might as well update to CM14.1 if you can't go back to EMUI lol
Or the version you're trying to flash is not compatible with your device?
I have same problem. I have Kitkat in the phone. I install TWRP recovery.. I want oficial Lolipopstock rom. Update via mobile menu - manualy localy update - dlan folder - inside Dload is LOLIPOP stock rom, mobile reset and go to the TWRP recovery.. again again.. Dalvik chache and chache has been deleted, but still same problem. I cant upgrade my phone to the stock rom Lolipom via Local upodate
EDIT: I must deleted all.. ceche, dalvik chache, system.. all without sd card, there was dload folder with update with kitkat stock rom.. I turned my phone off then I holded power buton vol + and -. Instalation complete
Any solution? I also have cwm Cnmode 12.1 rom and want to be able to flash stock rom 6.0. problem is I dont know how to get to stock recovery.. .. SWM recovery does not recognize .app extension for flashing and stock rom is in .app extension please help. G7 L03
Thank you
Some one please help
I have installed CWM recovery and Can not go back to stock rom, I want to go back to stock rom and maybe update to Marshmallow 6. Phone is unlocked..
Can someone give me hint how to do it? trough CWM I cant flash stock .APP only Zip but stock is in APP format
Maspindzeli said:
I have installed CWM recovery and Can not go back to stock rom, I want to go back to stock rom and maybe update to Marshmallow 6. Phone is unlocked..
Can someone give me hint how to do it? trough CWM I cant flash stock .APP only Zip but stock is in APP format
Click to expand...
Click to collapse
Put the Update.app in a dload folder and turn off the phone.
Then hold power and the + and - buttons until installation begins.
kamilb365 said:
Put the Update.app in a dload folder and turn off the phone.
Then hold power and the + and - buttons until installation begins.
Click to expand...
Click to collapse
I have custom recovery, I need to get back to stock recovery to do that... Custom recovery does not see update.app ... Please help . Custom recovery is looking for Zip file and cant see .app file at all...
Maspindzeli said:
I have custom recovery, I need to get back to stock recovery to do that... Custom recovery does not see update.app ... Please help . Custom recovery is looking for Zip file and cant see .app file at all...
Click to expand...
Click to collapse
You do not need stock recovery......
Just do what I told you in the previous post.
kamilb365 said:
You do not need stock recovery......
Just do what I told you in the previous post.
Click to expand...
Click to collapse
I have done it and tried many times ... screen takes me to custom recovery every time I do that.. I do that and I get to custom recovery and thats it... nu update... I have copied update app to dload folder and have tried like 15 times... I get to stock recovery (( it does not update
Maspindzeli said:
I have done it and tried many times ... screen takes me to custom recovery every time I do that
Click to expand...
Click to collapse
What recovery you using?