Database Users

Revert back to Windows Mobile after NAND Android Install?

I've been using senseTattoo for a few days, and was wondering: Is it possible to revert back to Windows Mobile? If so, how?
Any replied will be appreciated, thanks

just flash back to your prior windows mobile rom. get into tri-color screen by holding down power and camera while you press and release the soft reset button. then flash away.

Did somebody try it? I hold power button with camera, tri-color screen was shown, thne I press and release soft reset button and from this time I have only black screen nothing working - HTC Polaris

tominga said:
Did somebody try it? I hold power button with camera, tri-color screen was shown, thne I press and release soft reset button and from this time I have only black screen nothing working - HTC Polaris
Click to expand...
Click to collapse
Instructions might be different for POLA, check your forum.

tominga said:
Did somebody try it? I hold power button with camera, tri-color screen was shown, thne I press and release soft reset button and from this time I have only black screen nothing working - HTC Polaris
Click to expand...
Click to collapse
Did you flash a Windows Mobile ROM?? Sounds like from your post you didn't, so I'm just making sure. And if you want further support, I would recommend you go to the HTC Polaris section
http://forum.xda-developers.com/forumdisplay.php?f=397

yes , retorn to wm6.5 after on instal nand android on htc hd2. detail on my e-mail [email protected] .am reusit sa instalez nand android pe al meu htc hd2. apoi mam intors la wm6.5 cu ship rom . easy. is possible

I enter bootloader mode and then run ROMUpdateUtility.exe
but i get error message --> error [260] connection
what should i do?
thanks

finally, succeed reverting back to winmo
flashing by SD card because i coudn't flash by ROMUpdateUtility

Need Help!!!
Im trying to get my HD2 back to windows 6.5. Would you tell me how you did [email protected]

acooke1105 said:
Im trying to get my HD2 back to windows 6.5. Would you tell me how you did [email protected]
Click to expand...
Click to collapse
Wrong forum, man. Take a look in the hd2 winmo section.
Sent from my DROID2 using XDA App

[Q] MAGLDR with broken "Volume down"

I just have a big Problem and hope someone can solve this for me. Thanks in advance.
The "Volume up" and "down" key of my HD2 ist not function after i replace the touchscreen, but this phone function no problem. I want to install Android in this but have not read carefully (My big fault). After i install MAGLDR v1.11 and reboot i cant choose another option except the first one (Boot AD SD).
1. I want to install winmo again but cant take the phone comeback to bootloader (cant use the down volume).
2. I try to copy the android to microsd card but all the android in Android folder and that cant begin with booting.
So what can i do now? pls help me.

bucvuong said:
I just have a big Problem and hope someone can solve this for me. Thanks in advance.
The "Volume up" and "down" key of my HD2 ist not function after i replace the touchscreen, but this phone function no problem. I want to install Android in this but have not read carefully (My big fault). After i install MAGLDR v1.11 and reboot i cant choose another option except the first one (Boot AD SD).
1. I want to install winmo again but cant take the phone comeback to bootloader (cant use the down volume).
2. I try to copy the android to microsd card but all the android in Android folder and that cant begin with booting.
So what can i do now? pls help me.
Click to expand...
Click to collapse
Impossible to launch Bootloader from Android, so i've no idea how you could acess to boot loader, the only one solution is that DFT release the V1.2 with bootloader option!

you are screwed. how do your buttons not work. if they are broken because of a hardware problem then why not just go ahead and get another phone why put up with that hassle forever
Sent from my HTC HD2 using XDA App

I am sorry to hear of unfortunate situation.
Sent from my HTC HD2 using XDA App

when i fixed the touchscreen, the connect to touchscreen is broken.
now, how can i make a new android in microsd card to start with MAGLDR with "Boot AD SD"?
Or have any programm in windows to take HD2 to boot loader?
Thanks

bucvuong said:
when i fixed the touchscreen, the connect to touchscreen is broken.
now, how can i make a new android in microsd card to start with MAGLDR with "Boot AD SD"?
Or have any programm in windows to take HD2 to boot loader?
Thanks
Click to expand...
Click to collapse
afaik you can can enter bootloader by pressing END button and Reset Button at the same time..

lesjaw said:
afaik you can can enter bootloader by pressing END button and Reset Button at the same time..
Click to expand...
Click to collapse
I try to pressing End Button and Reset Button, but nothing happen, that just restart my HD2. Or how can i press the both of Button in the right way?
So anyone have another Idee?
Ps: Have the android rom boot with magldr yet?

[Q] Boot problem

Hi all,
I have this problem:
1) I tried install MAGLDR 1.13 on my phone and started ROM update utility. Update run everything ( On the screen was update from 3.15 to 2.00 ROM????? I dont understand)
2) After restart the white screen with HTC Logo is displayed and nothing - no response
3) The bootloader by pressing vol. down+ power does not work. I press everything (vol + and -) and still same - white screen with logo.
4) I cant use standart flash by PC conection, because phone didnt connect to PC.
Please, is there any help how to install bootloader and new ROM from SD card? Or other way how to repair it.
Thanks for any hint (except throw the phone from window )
PS: Please use some kind of easy English, my English is little poor and some technical words should be problem

Ive had the same problem, your bootloader is kind of broken! In 1 out of 50 tries you will reach the bootloader and then immideatly flash original spl and a stockrom.
Then send it to htc for warranty
Sent from my HTC HD2 using XDA App

boot
pres first on volume down button and then pressing power button . volume down button hold on to you in the colored screen. Once on colored screen with usb on pc and wm rom flashing.

DO this:
go to this : http://forum.xda-developers.com/showthread.php?t=945427
do step 1- 5 . Make sure you have HSPL 2.08 !
feel free to ask questions.

[Q] I cant Join the Bootloader (Tricolor Menu)

Hello HD2 Experts,
yesterday i wanted to reboot my HTC HD2 with Android (SD) on it, and after this it hanging on the HTC logo and cant boot.
It goes only to the MAGLDR but not to the Bootloader ( Tricolor Menu) if i press VOLUME DOWN AND POWER...
I installed via USB FLasher on MAGLDR the Windows 7 Phone and it was working perfectly without problems (Just Wlan/Wifi dont working). After this i tried to install 5 different NAND Android on my HD2 and every of this is hanging on this HTC Logo!!! I am sure that all this 5 were working before this...
My Problems:
1. Cant install (NAND) Android.
2. Cant join to the BOOTLOADER (Tricolor).
3. On WIndows 7 PHone no WLAN working.
I'm done with the nerves!!! Can anybody help me?
Best Regards, Mike

With phone off hold down volume down button and press power button for a couple seconds.
Sent from my HD2

First of all, wrong section to post... should be in Q & A.
Second of all, if above doesn't work, Vol up + down instead of just vol down.

dont work!
no reaction from hd2! it goes only to the MAGDLR menu!

Miketheboy1 said:
dont work!
no reaction from hd2! it goes only to the MAGDLR menu!
Click to expand...
Click to collapse
In MAGLDR do the volume buttons allow you to scroll up and down? If not, maybe your volume rocker took a **** on you?

help!
how to recover the phone if the volume rocker is indeed stuck?!

I presume you have a correct radio version.... ? That causes hang at boot.

crisisinthecity said:
In MAGLDR do the volume buttons allow you to scroll up and down? If not, maybe your volume rocker took a **** on you?
Click to expand...
Click to collapse
Yes it allows up and down! my volume buttons are not defect!

samsamuel said:
I presume you have a correct radio version.... ? That causes hang at boot.
Click to expand...
Click to collapse
Yes i have the correct radio version!!
I have 2.15
And if its not the correct version, how can i install a new version of RAdio, if i can not go inside to the bootloader menu?
Without the Bootloader Menu i cant do something! i am clueless! I tried really everything!

Miketheboy1 said:
Yes i have the correct radio version!!
I have 2.15
And if its not the correct version, how can i install a new version of RAdio, if i can not go inside to the bootloader menu?
Without the Bootloader Menu i cant do something! i am clueless! I tried really everything!
Click to expand...
Click to collapse
There should really be no reason you cant boot into bootloader if your volume buttons are working properly. turn phone completely off for 10 minutes turn phone on then hold volume button down till you boot into bootloader screen. I think you are holding volume button down slightly before your phone is turning on.

No reaction! im again in the MAGDLR menu....

please help! I have the same problem. Volume keys work, but I cant get into tri color bootloader. Nor can I load any nand rom, just stuck on HTC logo! please help me !!!!

Hold down the power and volume down button until bootloader shows up
2.15 radio
2.2miui stock via cwm

did u try hr ? hold volume up/down together and power on the phone.
Miketheboy1 said:
No reaction! im again in the MAGDLR menu....
Click to expand...
Click to collapse

Press together VOLUME DOWN - DO NOT LET GO! EVER TILL IN BOOTLOADER & RESET RED BUTTON - under batt. metal cover -
after few seconds the tri-coloured screen will appear

WarlockW said:
Press together VOLUME DOWN - DO NOT LET GO! EVER TILL IN BOOTLOADER & RESET RED BUTTON - under batt. metal cover -
after few seconds the tri-coloured screen will appear
Click to expand...
Click to collapse
I tried it! with the RED BUTTON!!! but it doesnt help...
And i tried it too with UP/DOWN...
I have no chance to go inside to the tricolor menu.
And if i want to boot again, its the same logo which not disappear
I dont understand how it works with Windows Phone 7 but not android...
And if i Install WIndows Phone 7 i can not join to the TRicolor Menu too!!!

Miketheboy1 said:
I tried it! with the RED BUTTON!!! but it doesnt help...
And i tried it too with UP/DOWN...
I have no chance to go inside to the tricolor menu.
And if i want to boot again, its the same logo which not disappear
I dont understand how it works with Windows Phone 7 but not android...
And if i Install WIndows Phone 7 i can not join to the TRicolor Menu too!!!
Click to expand...
Click to collapse
same here...I paid full price for this phone...really need some help...cotulla i know u can save us!!

shehrammajid said:
same here...I paid full price for this phone...really need some help...cotulla i know u can save us!!
Click to expand...
Click to collapse
yeah man.... im in the same situation! at the moment i have windows phone 7!! omg -.-

Miketheboy1 said:
yeah man.... im in the same situation! at the moment i have windows phone 7!! omg -.-
Click to expand...
Click to collapse
OK so after doing a TON of research and having spurts of false hope, I have figured out that the phone is indeed bricked. There is only one person in US that I know who can save it and he uses jtag. Here is his link. Send him a pm describing your situation and he'll help you out. I recommend him!!!
http://forum.xda-developers.com/member.php?u=416436

i already wrote!
its my last chance

Problem with flash, "1234 fatal hit 4"

hi dudes i am new here and i think i fu*ked my hd2 up... can you guys help... what should i do... Flashed failed on PC and now i get fatal hit 4 on my hd2... what should i do!? How do i reflash it?

Hmmm, i would start right from the beggining again.
Re-flash MAGLDR by holding down the volume button whilst pressing on.
Then, re-flash WP7.
Alternatively use the MAGLDR youve got, and hold down the on off button and go to flash on the menu (cant remember exactly what it says on menu

If I were you I'd do the following. Might seem a lot like overkill, but should work 100%.
1 - Go into bootloader (press and hold vol down button then power on as normal)
2 - Flash any WM6.5 ROM
3 - Charge the battery to 100%
4 - Perform a Task 29
5 - Flash a 2.xx.50.x radio
6 - Flash Magldr
7 - using vol down button select option 5 from magldr menu
8 - when phone says USB flash WM7 (suggest YukiXDA for the mo until a ripe MANGO released)

i made it but can you give me a good wp7 rom and radio file? ty

This Is The Most Stable N Outstanding One I Saw And Im using at the Moment
http://forum.xda-developers.com/showthread.php?t=1080950

and one more question... Can i go back in windows mobile 6.5 after i install wp7?
i installed everything but when i was installing the WP7 rom it got some error and now i start the device says go go go in magldr mode and then shows a black white picture with mobile and a lap top and stays like that 5 mins and then restarts... what should i do? It drives me crazy...

problem with hard reset
Can some one help me with hard resetting windows phone7
1. On magldr screen, when I see "1234.." etc, I pressed and hold volume down key, I was expecting to see some screen which says press vol- twice to clear data. Instead I am seeing the main boot screen with four colour bands from top to bottom.
Please help..
Thanks in advance
Kishore

Hard resetting WP7 on HD2
Can some one help me with hard resetting windows phone7 on HD2
1. On magldr screen, when I see "1234.." etc, I pressed and hold volume down key, I was expecting to see some screen which says press vol- twice to clear data. Instead I am seeing the main boot screen with four colour bands from top to bottom.
Please help..
Thanks in advance
Kishore
EDIT:: I got it resolved, I could not figure out the way I need to press both the vol+ & vol- button at once during the 1234 GoGo screen... It worked

what do you want? cant understand you... You want to clear data or hard reset windows 7 phone... You need MAGLDR just when you flash the windows 7 phone rom...

king_slavcho said:
what do you want? cant understand you... You want to clear data or hard reset windows 7 phone... You need MAGLDR just when you flash the windows 7 phone rom...
Click to expand...
Click to collapse
Pardon for not being clear to you...
I got it resolved though, I could not figure out the way I need to press both the vol+ & vol- button together during the 1234 GoGo screen... (earlier i was pressing either vol + or vol- but the requirement is both vol+ and vol-)
Regards
Kishore

Fatal hit 4
Hey guys,
After a while i decide to go back tom my HTC HD2 and install the WP7 rom but like some others im facing the "1234 fatal hit 4' issue. Has anybody being able to adress the problem?
Thanks in advance.