Database Users

How to restore the orginal S200 ROM ?

Hi people,
I have a mayor problem. I just fu*ked up my phone by installing WM6.
Now the screen freezes when the QTEK "Keep the world in one" logo is visible with the OS Version information. Hard reset wont work.
How can I restore the original rom ?
Please help me!

s200 off
and I have this problem. my phone is off by installing new spl
Now the screen freezes when the QTEK "Keep the world in one" logo is visible with the OS Version information. Hard reset wont work.
How can I restore the original rom ?
Please help me

To go in the boot loader screen you have to:
press & hold camera and commmanager button
press the softreset hole
release the commmanager button and keep hold the camera button until the 3 colours display appear
Byez

but wat can i do after i hav the 3 colour screen come out?
pls help..... i'm very nervous..... i don wanna waste my money coz i screw up my phone.,...
i'm now outstation... can go back to the service center within this 6 mth....

Connect USB Cable. Go in the Boot Loader screen (Hold down camera button, power button and soft reset until the 3 colours display appear). Run Rom upgrade Software.

mrsurya2000 said:
Connect USB Cable. Go in the Boot Loader screen (Hold down camera button, power button and soft reset until the 3 colours display appear). Run Rom upgrade Software.
Click to expand...
Click to collapse
Which rom upgrade software ?

de.schurk said:
Which rom upgrade software ?
Click to expand...
Click to collapse
http://www.romupdate.ru/ghjibdrblkz...rophet_220734_2207114_024721_QtekWWE_Ship.exe --> this software
don't worry, your device isn't bricked as long as you can run it in bootloader
check in WIKI if you have G3 or G4 Prophet

I'm the exact same situation.
And wiki didn't help so far...

Take it easy and flash the ROM as described. Use any WM5 ROM compatible with your device, but preferrably one with no vendor ID. In case you cannot update normally use the RUU-No-Vendor-ID application found in the FTP.
As said above the device is not dead, it can be recovered.

namco said:
Take it easy and flash the ROM as described. Use any WM5 ROM compatible with your device, but preferrably one with no vendor ID. In case you cannot update normally use the RUU-No-Vendor-ID application found in the FTP.
As said above the device is not dead, it can be recovered.
Click to expand...
Click to collapse
Bear with me on the dumb questions
It looks like I managed to re-install
Thank you for your help. I installed the rom dezzer advised (post 7 of this thread) and it worked fine. Does that mean tha NOW i can flash smart1 1.3's?

Yep. Turn off the phone, make it sync with activesync and run UPDATE_ROM.bat.
Then cross your fingers Kidding. It will surely work. Remember to hard-reset after the upgrade.
If anything goes wrong just reflash WM5 and hard-reset. Always hard-reset after ANY OS upgrade.

WM 6.1 Pro die

I just bought a Viva, but there is one thing that i concern about this Viva is Windows Mobile 6.1 that shipped with it suddenly die while i'm using it. I completely don't know why...
Anyone can help me please??

reflash it... press volume down key and send (green) button together and press power button once (this will bring up the tri-color bootloader menu)... connect it to your computer and update it with the latest WM6.1 OS (download it from HTC website)...
or better yet... avail your warranty.

Thank for your reply. I'll try it.!

TheRem said:
reflash it... press volume down key and send (green) button together and press power button once (this will bring up the tri-color bootloader menu)... connect it to your computer and update it with the latest WM6.1 OS (download it from HTC website)...
or better yet... avail your warranty.
Click to expand...
Click to collapse
You don't actually need to hold the send key, just the volume down key and the press power. I just thought I'd offer a friendly tip.

thanks for clarifying that XirXes...
i was wondering why i can't boot the device with one hand.

[Q] How To Upgrade MAGLDR From Android

I was wondering if anyone out there can help me.
Im currently using Magloader Version 1.11 by cotulla 2010 and i would like to upgrade to MAGloader Version 1.12 so that i will be able to run Windows Phone 7, though i can't do this because in order to upgrade Magloader i have to be connected to Windows Mobile Device Center and i cant connect to it since im running NAND Android not windows mobile.
Can anyone help me ? Thanks!!
Isaac

Read
Look at this thread
http://forum.xda-developers.com/showthread.php?t=912416
You install MAGDLR 1.12 the same way as you installed MAGDLR 1.1.
Read through the forums and use some common sense.

Hopefully a slightly more helpful response...
To place the HD2 into Bootloader mode, remove the HD2's back cover hold down the volume down key, now press in the red reset button under the back cover to the bottom left of the SIM, release the soft reset button but continue to hold the volume down key in until you are presented with the tri colour bootloader screen. To exit Soft Reset the device.

shovels said:
Hopefully a slightly more helpful response...
To place the HD2 into Bootloader mode, remove the HD2's back cover hold down the volume down key, now press in the red reset button under the back cover to the bottom left of the SIM, release the soft reset button but continue to hold the volume down key in until you are presented with the tri colour bootloader screen. To exit Soft Reset the device.
Click to expand...
Click to collapse
Thank you so much for your help ! Will try to do asap, so once i enter the bootloader screen windows will detect my phone and i can update my Magloader ?? Thanks a million for your time and help !

Uninstalling WM7?

How do I go about uninstalling Windows Phone 7 from my HD2, and reinstalling 6.5?
Zune acknowledges that the device is connected, however, I cannot get the HardSPL to even activate.
Any thoughts?
Thanks in advance!

Go to the tri color screen by pressing vol down and power button at the same time,then just flash like a regular rom.

CrAzYiaN said:
Go to the tri color screen by pressing vol down and power button at the same time,then just flash like a regular rom.
Click to expand...
Click to collapse
hi
i installed wp7 on my hd2 but i didnt like it so much
plz help me
how can i reinstall wp 6.5 on my hd2 and uninstall wp7?
plz answer me by email : [email protected]
tnx

I am quite a bit surprised to see such requests.
Really, that´s where the fun stops.
There are brilliant step-by-step tutorials available here in the forum, and you really ask that somebody makes a personal mail to you? For free?
Come on.
Check this thread here, follow the link to the flashing tutorial for your device (512Leo or 1024Leo, the latter is the US model), skip the HSPL part (since you already have that on your phone), and flash either via USB or SD card.

babaklord said:
crazyian said:
go to the tri color screen by pressing vol down and power button at the same time,then just flash like a regular rom.
Click to expand...
Click to collapse
hi
i installed wp7 on my hd2 but i didnt like it so much
plz help me
how can i reinstall wp 6.5 on my hd2 and uninstall wp7?
Plz answer me by email : [email protected]
tnx
Click to expand...
Click to collapse
Perhaps I will Jump off our building tonight
Dude, Come on !! You just quoted the answer to your very own question !! ..

Thanks so much guys!
Pushing only the down button helped a bunch, sorry for the hassle!

Problem with flash, "1234 fatal hit 4"

hi dudes i am new here and i think i fu*ked my hd2 up... can you guys help... what should i do... Flashed failed on PC and now i get fatal hit 4 on my hd2... what should i do!? How do i reflash it?

Hmmm, i would start right from the beggining again.
Re-flash MAGLDR by holding down the volume button whilst pressing on.
Then, re-flash WP7.
Alternatively use the MAGLDR youve got, and hold down the on off button and go to flash on the menu (cant remember exactly what it says on menu

If I were you I'd do the following. Might seem a lot like overkill, but should work 100%.
1 - Go into bootloader (press and hold vol down button then power on as normal)
2 - Flash any WM6.5 ROM
3 - Charge the battery to 100%
4 - Perform a Task 29
5 - Flash a 2.xx.50.x radio
6 - Flash Magldr
7 - using vol down button select option 5 from magldr menu
8 - when phone says USB flash WM7 (suggest YukiXDA for the mo until a ripe MANGO released)

i made it but can you give me a good wp7 rom and radio file? ty

This Is The Most Stable N Outstanding One I Saw And Im using at the Moment
http://forum.xda-developers.com/showthread.php?t=1080950

and one more question... Can i go back in windows mobile 6.5 after i install wp7?
i installed everything but when i was installing the WP7 rom it got some error and now i start the device says go go go in magldr mode and then shows a black white picture with mobile and a lap top and stays like that 5 mins and then restarts... what should i do? It drives me crazy...

problem with hard reset
Can some one help me with hard resetting windows phone7
1. On magldr screen, when I see "1234.." etc, I pressed and hold volume down key, I was expecting to see some screen which says press vol- twice to clear data. Instead I am seeing the main boot screen with four colour bands from top to bottom.
Please help..
Thanks in advance
Kishore

Hard resetting WP7 on HD2
Can some one help me with hard resetting windows phone7 on HD2
1. On magldr screen, when I see "1234.." etc, I pressed and hold volume down key, I was expecting to see some screen which says press vol- twice to clear data. Instead I am seeing the main boot screen with four colour bands from top to bottom.
Please help..
Thanks in advance
Kishore
EDIT:: I got it resolved, I could not figure out the way I need to press both the vol+ & vol- button at once during the 1234 GoGo screen... It worked

what do you want? cant understand you... You want to clear data or hard reset windows 7 phone... You need MAGLDR just when you flash the windows 7 phone rom...

king_slavcho said:
what do you want? cant understand you... You want to clear data or hard reset windows 7 phone... You need MAGLDR just when you flash the windows 7 phone rom...
Click to expand...
Click to collapse
Pardon for not being clear to you...
I got it resolved though, I could not figure out the way I need to press both the vol+ & vol- button together during the 1234 GoGo screen... (earlier i was pressing either vol + or vol- but the requirement is both vol+ and vol-)
Regards
Kishore

Fatal hit 4
Hey guys,
After a while i decide to go back tom my HTC HD2 and install the WP7 rom but like some others im facing the "1234 fatal hit 4' issue. Has anybody being able to adress the problem?
Thanks in advance.