Database Users

[Q] How To Upgrade MAGLDR From Android

I was wondering if anyone out there can help me.
Im currently using Magloader Version 1.11 by cotulla 2010 and i would like to upgrade to MAGloader Version 1.12 so that i will be able to run Windows Phone 7, though i can't do this because in order to upgrade Magloader i have to be connected to Windows Mobile Device Center and i cant connect to it since im running NAND Android not windows mobile.
Can anyone help me ? Thanks!!
Isaac

Read
Look at this thread
http://forum.xda-developers.com/showthread.php?t=912416
You install MAGDLR 1.12 the same way as you installed MAGDLR 1.1.
Read through the forums and use some common sense.

Hopefully a slightly more helpful response...
To place the HD2 into Bootloader mode, remove the HD2's back cover hold down the volume down key, now press in the red reset button under the back cover to the bottom left of the SIM, release the soft reset button but continue to hold the volume down key in until you are presented with the tri colour bootloader screen. To exit Soft Reset the device.

shovels said:
Hopefully a slightly more helpful response...
To place the HD2 into Bootloader mode, remove the HD2's back cover hold down the volume down key, now press in the red reset button under the back cover to the bottom left of the SIM, release the soft reset button but continue to hold the volume down key in until you are presented with the tri colour bootloader screen. To exit Soft Reset the device.
Click to expand...
Click to collapse
Thank you so much for your help ! Will try to do asap, so once i enter the bootloader screen windows will detect my phone and i can update my Magloader ?? Thanks a million for your time and help !

Can't access bootloader android won't start

I cant access bootloader (tri-color screen) i have magldr 1.11 i have flashed three different versions of android ....same result freezes on android logo...and i have tested those builds they do work on my other htc hd2 ....i have alse flashed windows7 but same result comes back to magldr screen......any help would be appreciated

im sure the bootloader is before Magldr in sequence so if that is loading you should be able to load the bootloader. You are holding volume down while turning on aint you? What radio are you using?
Ricey

thank you for your quick reply......yes I am holding volume down it doesn't wanna work i have also tried hard reset and it just goes directly to startup screen....and i know i am not doing anything wrong because i can access bootloader on my other HTC HD2....

deziguy420 said:
thank you for your quick reply......yes I am holding volume down it doesn't wanna work i have also tried hard reset and it just goes directly to startup screen....and i know i am not doing anything wrong because i can access bootloader on my other HTC HD2....
Click to expand...
Click to collapse
Does the volume button work once the phone has booted up?
Ricey
Sent from my HTC HD2

yes volume button work that's how i flashed android on it

Same issue here.. not able to see the three colur screen +1

try holding both volume up and down than volume up to clear data than reboot hold down the button for tri-color bootloader. thats if holding both buttons work than task29 and start all over. please dont scream at me im only giving a suggestion as i havent had this problem yet( hope not at all).

[Q] Boot problem

Hi all,
I have this problem:
1) I tried install MAGLDR 1.13 on my phone and started ROM update utility. Update run everything ( On the screen was update from 3.15 to 2.00 ROM????? I dont understand)
2) After restart the white screen with HTC Logo is displayed and nothing - no response
3) The bootloader by pressing vol. down+ power does not work. I press everything (vol + and -) and still same - white screen with logo.
4) I cant use standart flash by PC conection, because phone didnt connect to PC.
Please, is there any help how to install bootloader and new ROM from SD card? Or other way how to repair it.
Thanks for any hint (except throw the phone from window )
PS: Please use some kind of easy English, my English is little poor and some technical words should be problem

Ive had the same problem, your bootloader is kind of broken! In 1 out of 50 tries you will reach the bootloader and then immideatly flash original spl and a stockrom.
Then send it to htc for warranty
Sent from my HTC HD2 using XDA App

boot
pres first on volume down button and then pressing power button . volume down button hold on to you in the colored screen. Once on colored screen with usb on pc and wm rom flashing.

DO this:
go to this : http://forum.xda-developers.com/showthread.php?t=945427
do step 1- 5 . Make sure you have HSPL 2.08 !
feel free to ask questions.

[Q] I cant Join the Bootloader (Tricolor Menu)

Hello HD2 Experts,
yesterday i wanted to reboot my HTC HD2 with Android (SD) on it, and after this it hanging on the HTC logo and cant boot.
It goes only to the MAGLDR but not to the Bootloader ( Tricolor Menu) if i press VOLUME DOWN AND POWER...
I installed via USB FLasher on MAGLDR the Windows 7 Phone and it was working perfectly without problems (Just Wlan/Wifi dont working). After this i tried to install 5 different NAND Android on my HD2 and every of this is hanging on this HTC Logo!!! I am sure that all this 5 were working before this...
My Problems:
1. Cant install (NAND) Android.
2. Cant join to the BOOTLOADER (Tricolor).
3. On WIndows 7 PHone no WLAN working.
I'm done with the nerves!!! Can anybody help me?
Best Regards, Mike

With phone off hold down volume down button and press power button for a couple seconds.
Sent from my HD2

First of all, wrong section to post... should be in Q & A.
Second of all, if above doesn't work, Vol up + down instead of just vol down.

dont work!
no reaction from hd2! it goes only to the MAGDLR menu!

Miketheboy1 said:
dont work!
no reaction from hd2! it goes only to the MAGDLR menu!
Click to expand...
Click to collapse
In MAGLDR do the volume buttons allow you to scroll up and down? If not, maybe your volume rocker took a **** on you?

help!
how to recover the phone if the volume rocker is indeed stuck?!

I presume you have a correct radio version.... ? That causes hang at boot.

crisisinthecity said:
In MAGLDR do the volume buttons allow you to scroll up and down? If not, maybe your volume rocker took a **** on you?
Click to expand...
Click to collapse
Yes it allows up and down! my volume buttons are not defect!

samsamuel said:
I presume you have a correct radio version.... ? That causes hang at boot.
Click to expand...
Click to collapse
Yes i have the correct radio version!!
I have 2.15
And if its not the correct version, how can i install a new version of RAdio, if i can not go inside to the bootloader menu?
Without the Bootloader Menu i cant do something! i am clueless! I tried really everything!

Miketheboy1 said:
Yes i have the correct radio version!!
I have 2.15
And if its not the correct version, how can i install a new version of RAdio, if i can not go inside to the bootloader menu?
Without the Bootloader Menu i cant do something! i am clueless! I tried really everything!
Click to expand...
Click to collapse
There should really be no reason you cant boot into bootloader if your volume buttons are working properly. turn phone completely off for 10 minutes turn phone on then hold volume button down till you boot into bootloader screen. I think you are holding volume button down slightly before your phone is turning on.

No reaction! im again in the MAGDLR menu....

please help! I have the same problem. Volume keys work, but I cant get into tri color bootloader. Nor can I load any nand rom, just stuck on HTC logo! please help me !!!!

Hold down the power and volume down button until bootloader shows up
2.15 radio
2.2miui stock via cwm

did u try hr ? hold volume up/down together and power on the phone.
Miketheboy1 said:
No reaction! im again in the MAGDLR menu....
Click to expand...
Click to collapse

Press together VOLUME DOWN - DO NOT LET GO! EVER TILL IN BOOTLOADER & RESET RED BUTTON - under batt. metal cover -
after few seconds the tri-coloured screen will appear

WarlockW said:
Press together VOLUME DOWN - DO NOT LET GO! EVER TILL IN BOOTLOADER & RESET RED BUTTON - under batt. metal cover -
after few seconds the tri-coloured screen will appear
Click to expand...
Click to collapse
I tried it! with the RED BUTTON!!! but it doesnt help...
And i tried it too with UP/DOWN...
I have no chance to go inside to the tricolor menu.
And if i want to boot again, its the same logo which not disappear
I dont understand how it works with Windows Phone 7 but not android...
And if i Install WIndows Phone 7 i can not join to the TRicolor Menu too!!!

Miketheboy1 said:
I tried it! with the RED BUTTON!!! but it doesnt help...
And i tried it too with UP/DOWN...
I have no chance to go inside to the tricolor menu.
And if i want to boot again, its the same logo which not disappear
I dont understand how it works with Windows Phone 7 but not android...
And if i Install WIndows Phone 7 i can not join to the TRicolor Menu too!!!
Click to expand...
Click to collapse
same here...I paid full price for this phone...really need some help...cotulla i know u can save us!!

shehrammajid said:
same here...I paid full price for this phone...really need some help...cotulla i know u can save us!!
Click to expand...
Click to collapse
yeah man.... im in the same situation! at the moment i have windows phone 7!! omg -.-

Miketheboy1 said:
yeah man.... im in the same situation! at the moment i have windows phone 7!! omg -.-
Click to expand...
Click to collapse
OK so after doing a TON of research and having spurts of false hope, I have figured out that the phone is indeed bricked. There is only one person in US that I know who can save it and he uses jtag. Here is his link. Send him a pm describing your situation and he'll help you out. I recommend him!!!
http://forum.xda-developers.com/member.php?u=416436

i already wrote!
its my last chance

[Q] Can't get to Bootloader

Hey Guys. I was hoping someone could help me with my problem.
Currently my HTC HD2 is running cyanogenmod7 using MAGLDR 1.13.
I want to switch back to winmo 6.5 to start fresh and have read tutorials that i need to enter bootloader ( the red, white, green screen thingy) to establish a connection with activesync. But the problem is that i can't actually get into bootloader and i have tried volume down button with the power button combo and it doesn't seem to work.
If someone knows how to get to bootloader then please help.

While the phone is off... do what you did... hold power and volume down buttons...

Yes, i tried that 20 times and it doesn't work

Roger9546 said:
Yes, i tried that 20 times and it doesn't work
Click to expand...
Click to collapse
Does the volume down button work on your HD2? Sounds like it does not.

That's the strange part. My volume buttons work perfectly in Android and Magldr. I don't know what's happening

switch off the phone and open it again while you are holding the end call button
you will go the magladr menu , i thik you can find something there to take to the bootloader

the_entity said:
switch off the phone and open it again while you are holding the end call button
you will go the magladr menu , i thik you can find something there to take to the bootloader
Click to expand...
Click to collapse
No no no no no and NO!!!!!!!!!!!!
There is nothing in MAGLDR that can make your HD2 go into bootloader. The only this.g that can get you into the bootloader besides the external hardware buttons is the bootloader.exe that can be run from inside Windows Mobile. It can only be run from inside Windows Mobile. MAGLDR is a custom bootloader that runs after the HSPL bootloader and has no way of communicating with the HSPL bootloader.
At the OP, you may have a faulty volume button ribbon that is causing you not to be able to boot into the bootloader. Check out this thread you will see what I mean. Read post #10

Boot loader mode
Bootloader mode is handy for checking the HD2's version of Hard SPL as well as the installed ROM and Radio versions,and also for ROM or Radio flashing to the HD2. I sometimes use the Bootloader method to flash ROMs as it saves connecting to Activesync/WMDC because the PC recognises the HD2 as connected via USB. It is also useful for flashing a ROM or Radio version if the battery charge is less than 50%, as it ignores the 50% charge warning that is normally displayed when flashing if the HD2 is low on charge. Never use this method if you have less than a 30% charge as you will be in deep trouble if the HD2 runs out of power while flashing a ROM or Radio version!
To place the HD2 into Bootloader mode, remove the HD2's back cover hold down the volume down key, now press in the red reset button under the back cover to the bottom left of the SIM, release the soft reset button but continue to hold the volume down key in until you are presented with the tri colour bootloader screen. To exit Soft Reset the device.

AlexALP said:
Bootloader mode is handy for checking the HD2's version of Hard SPL as well as the installed ROM and Radio versions,and also for ROM or Radio flashing to the HD2. I sometimes use the Bootloader method to flash ROMs as it saves connecting to Activesync/WMDC because the PC recognises the HD2 as connected via USB. It is also useful for flashing a ROM or Radio version if the battery charge is less than 50%, as it ignores the 50% charge warning that is normally displayed when flashing if the HD2 is low on charge. Never use this method if you have less than a 30% charge as you will be in deep trouble if the HD2 runs out of power while flashing a ROM or Radio version!
To place the HD2 into Bootloader mode, remove the HD2's back cover hold down the volume down key, now press in the red reset button under the back cover to the bottom left of the SIM, release the soft reset button but continue to hold the volume down key in until you are presented with the tri colour bootloader screen. To exit Soft Reset the device.
Click to expand...
Click to collapse
Hi!
I try this so many time, but my hd2 does not step in bootloader. Have you got some other idea??

I have exactly the same problem, help!

Roger9546 said:
That's the strange part. My volume buttons work perfectly in Android and Magldr. I don't know what's happening
Click to expand...
Click to collapse
Can you get into the windows start- settings - system? If yes, there is an app that says "clear storage memory", which brings you back to the factory settings when you bought it. It's worth a try.
Entering bootloader screen is sometimes difficult: press and hold the volume down button and then press shortly
the power button, this should bring you to this screen. If it does not, remove your battery for at least 10 minutes and try again.
Good luck and regards, Kuzibri

I had the same problem ...
I could not enter the bootmanager in android brief button press to end a call, we moved the menu to shut down, reset, etc, the same menu that appears when you hold down the button longer to stop calling ...
This defect appeared to me after I lay HD2 due to large changes in ambient temperature ...
After a few days of research, opening, drying I removed the defect, so I pulled out and cleaned the keys below the screen (Home, Menu, Back, red and green) and wipe the foil that these pressures are the same buttons ...
My HD2 has been working for 2 weeks with no errors

same here but ...
to get in to bootloader i just discovered a different (strange)way ... from winmo , with back cover off press red reset button and imediately while reseting press volume down ... this is my only way to get in to ... otherwise , all the keys are fully working when in windows mobile .

very strange
all the keys includind the volume down key, works well inside windows, but I just cant go to bootloader.
I will dismante the phone, wash it and dry it, to see if something changes,

I have problem getting into 3 color bootloader also, but its because my voulme down is broken/ doesn't work anymore. Any other ways besides the volume down button?

Jcamacho228 said:
I have problem getting into 3 color bootloader also, but its because my voulme down is broken/ doesn't work anymore. Any other ways besides the volume down button?
Click to expand...
Click to collapse
only if you are currently running winmo 6.5, , theres a winmo app to restart into bootloader.
alternatively, dismantle the phone and short the voldown connections.

bootloader&spl
How to enter bootloader(tricolor scren) on hd2 t-mobile-usa, i tried wth vol down key but no respns. I thk may be another key for hd2 t-mobile-usa. Does any one know? Or thr is no Spl with ths stock rom...if so, how to instal Spl on hd2 t-mobile(1024) or stock rom wth Spl so that i can instal Hspl... Thanx

foysyl said:
How to enter bootloader(tricolor scren) on hd2 t-mobile-usa, i tried wth vol down key but no respns. I thk may be another key for hd2 t-mobile-usa. Does any one know? Or thr is no Spl with ths stock rom...if so,
Click to expand...
Click to collapse
phone off
press and hold voldown
tap and release power
keep holding voldown.
No, the tmous doesn't use a different method than the regular hd2.
how to instal Spl on hd2 t-mobile(1024) or stock rom wth Spl so that i can instal Hspl... Thanx
Click to expand...
Click to collapse
all stock roms include an spl, i think YOU mean ''or stock rom with hspl.''', , no, there are no stock roms that include hspl.
there is only one way to apply HSPL, , and that's through bootloader.

bootloader prob. on hd2 usa
How to enter bootloader(tricolor scren) on hd2 t-mobile-usa, i tried wth vol down key but no respns. I thk may be another key for hd2 t-mobile-usa. Does any one know? Or thr is no Spl with ths stock rom¡*if so, how to instal Spl on hd2 t-mobile(1024) or stock rom wth Spl so that i can instal Hspl¡* & whr i can get bootloader.exe for hd2 - wp6.5
Thanx
---------- Post added at 05:54 PM ---------- Previous post was at 05:30 PM ----------
But cant get its bootloader by holding vol down key wth power key at a time thn pres reset butn.
Is thr any soft/bootloader.exe for entering hd2's bootloader through pc or frm phn(hd2-usa)? If so thn pls giv the link. Or is needed to re-instll stock rom over prsnt stock rom
Thnx([email protected])
---------- Post added at 06:12 PM ---------- Previous post was at 05:54 PM ----------
samsamuel said:
only if you are currently running winmo 6.5, , theres a winmo app to restart into bootloader.
alternatively, dismantle the phone and short the voldown connections.
Click to expand...
Click to collapse
Need ths App...pls giv me the download link

Try this!
Hi, I had a similar problem where I could not enter the boot loader. The solution I found that worked for me was provided by: broncogr on another thread discussing a similar issue with the DHD ( http://forum.xda-developers.com/showthread.php?t=889567 )
"restart the phone
when the capacitive buttons light is off immediately press and hold volume - button and keep holding until device is in bootloader
cheers " - broncogr
Hope this helps someone.
Ez