Hey Guys. I was hoping someone could help me with my problem.
Currently my HTC HD2 is running cyanogenmod7 using MAGLDR 1.13.
I want to switch back to winmo 6.5 to start fresh and have read tutorials that i need to enter bootloader ( the red, white, green screen thingy) to establish a connection with activesync. But the problem is that i can't actually get into bootloader and i have tried volume down button with the power button combo and it doesn't seem to work.
If someone knows how to get to bootloader then please help.
While the phone is off... do what you did... hold power and volume down buttons...
Yes, i tried that 20 times and it doesn't work
Roger9546 said:
Yes, i tried that 20 times and it doesn't work
Click to expand...
Click to collapse
Does the volume down button work on your HD2? Sounds like it does not.
That's the strange part. My volume buttons work perfectly in Android and Magldr. I don't know what's happening
switch off the phone and open it again while you are holding the end call button
you will go the magladr menu , i thik you can find something there to take to the bootloader
the_entity said:
switch off the phone and open it again while you are holding the end call button
you will go the magladr menu , i thik you can find something there to take to the bootloader
Click to expand...
Click to collapse
No no no no no and NO!!!!!!!!!!!!
There is nothing in MAGLDR that can make your HD2 go into bootloader. The only this.g that can get you into the bootloader besides the external hardware buttons is the bootloader.exe that can be run from inside Windows Mobile. It can only be run from inside Windows Mobile. MAGLDR is a custom bootloader that runs after the HSPL bootloader and has no way of communicating with the HSPL bootloader.
At the OP, you may have a faulty volume button ribbon that is causing you not to be able to boot into the bootloader. Check out this thread you will see what I mean. Read post #10
Boot loader mode
Bootloader mode is handy for checking the HD2's version of Hard SPL as well as the installed ROM and Radio versions,and also for ROM or Radio flashing to the HD2. I sometimes use the Bootloader method to flash ROMs as it saves connecting to Activesync/WMDC because the PC recognises the HD2 as connected via USB. It is also useful for flashing a ROM or Radio version if the battery charge is less than 50%, as it ignores the 50% charge warning that is normally displayed when flashing if the HD2 is low on charge. Never use this method if you have less than a 30% charge as you will be in deep trouble if the HD2 runs out of power while flashing a ROM or Radio version!
To place the HD2 into Bootloader mode, remove the HD2's back cover hold down the volume down key, now press in the red reset button under the back cover to the bottom left of the SIM, release the soft reset button but continue to hold the volume down key in until you are presented with the tri colour bootloader screen. To exit Soft Reset the device.
AlexALP said:
Bootloader mode is handy for checking the HD2's version of Hard SPL as well as the installed ROM and Radio versions,and also for ROM or Radio flashing to the HD2. I sometimes use the Bootloader method to flash ROMs as it saves connecting to Activesync/WMDC because the PC recognises the HD2 as connected via USB. It is also useful for flashing a ROM or Radio version if the battery charge is less than 50%, as it ignores the 50% charge warning that is normally displayed when flashing if the HD2 is low on charge. Never use this method if you have less than a 30% charge as you will be in deep trouble if the HD2 runs out of power while flashing a ROM or Radio version!
To place the HD2 into Bootloader mode, remove the HD2's back cover hold down the volume down key, now press in the red reset button under the back cover to the bottom left of the SIM, release the soft reset button but continue to hold the volume down key in until you are presented with the tri colour bootloader screen. To exit Soft Reset the device.
Click to expand...
Click to collapse
Hi!
I try this so many time, but my hd2 does not step in bootloader. Have you got some other idea??
I have exactly the same problem, help!
Roger9546 said:
That's the strange part. My volume buttons work perfectly in Android and Magldr. I don't know what's happening
Click to expand...
Click to collapse
Can you get into the windows start- settings - system? If yes, there is an app that says "clear storage memory", which brings you back to the factory settings when you bought it. It's worth a try.
Entering bootloader screen is sometimes difficult: press and hold the volume down button and then press shortly
the power button, this should bring you to this screen. If it does not, remove your battery for at least 10 minutes and try again.
Good luck and regards, Kuzibri
I had the same problem ...
I could not enter the bootmanager in android brief button press to end a call, we moved the menu to shut down, reset, etc, the same menu that appears when you hold down the button longer to stop calling ...
This defect appeared to me after I lay HD2 due to large changes in ambient temperature ...
After a few days of research, opening, drying I removed the defect, so I pulled out and cleaned the keys below the screen (Home, Menu, Back, red and green) and wipe the foil that these pressures are the same buttons ...
My HD2 has been working for 2 weeks with no errors
same here but ...
to get in to bootloader i just discovered a different (strange)way ... from winmo , with back cover off press red reset button and imediately while reseting press volume down ... this is my only way to get in to ... otherwise , all the keys are fully working when in windows mobile .
very strange
all the keys includind the volume down key, works well inside windows, but I just cant go to bootloader.
I will dismante the phone, wash it and dry it, to see if something changes,
I have problem getting into 3 color bootloader also, but its because my voulme down is broken/ doesn't work anymore. Any other ways besides the volume down button?
Jcamacho228 said:
I have problem getting into 3 color bootloader also, but its because my voulme down is broken/ doesn't work anymore. Any other ways besides the volume down button?
Click to expand...
Click to collapse
only if you are currently running winmo 6.5, , theres a winmo app to restart into bootloader.
alternatively, dismantle the phone and short the voldown connections.
bootloader&spl
How to enter bootloader(tricolor scren) on hd2 t-mobile-usa, i tried wth vol down key but no respns. I thk may be another key for hd2 t-mobile-usa. Does any one know? Or thr is no Spl with ths stock rom...if so, how to instal Spl on hd2 t-mobile(1024) or stock rom wth Spl so that i can instal Hspl... Thanx
foysyl said:
How to enter bootloader(tricolor scren) on hd2 t-mobile-usa, i tried wth vol down key but no respns. I thk may be another key for hd2 t-mobile-usa. Does any one know? Or thr is no Spl with ths stock rom...if so,
Click to expand...
Click to collapse
phone off
press and hold voldown
tap and release power
keep holding voldown.
No, the tmous doesn't use a different method than the regular hd2.
how to instal Spl on hd2 t-mobile(1024) or stock rom wth Spl so that i can instal Hspl... Thanx
Click to expand...
Click to collapse
all stock roms include an spl, i think YOU mean ''or stock rom with hspl.''', , no, there are no stock roms that include hspl.
there is only one way to apply HSPL, , and that's through bootloader.
bootloader prob. on hd2 usa
How to enter bootloader(tricolor scren) on hd2 t-mobile-usa, i tried wth vol down key but no respns. I thk may be another key for hd2 t-mobile-usa. Does any one know? Or thr is no Spl with ths stock rom¡*if so, how to instal Spl on hd2 t-mobile(1024) or stock rom wth Spl so that i can instal Hspl¡* & whr i can get bootloader.exe for hd2 - wp6.5
Thanx
---------- Post added at 05:54 PM ---------- Previous post was at 05:30 PM ----------
But cant get its bootloader by holding vol down key wth power key at a time thn pres reset butn.
Is thr any soft/bootloader.exe for entering hd2's bootloader through pc or frm phn(hd2-usa)? If so thn pls giv the link. Or is needed to re-instll stock rom over prsnt stock rom
Thnx([email protected])
---------- Post added at 06:12 PM ---------- Previous post was at 05:54 PM ----------
samsamuel said:
only if you are currently running winmo 6.5, , theres a winmo app to restart into bootloader.
alternatively, dismantle the phone and short the voldown connections.
Click to expand...
Click to collapse
Need ths App...pls giv me the download link
Try this!
Hi, I had a similar problem where I could not enter the boot loader. The solution I found that worked for me was provided by: broncogr on another thread discussing a similar issue with the DHD ( http://forum.xda-developers.com/showthread.php?t=889567 )
"restart the phone
when the capacitive buttons light is off immediately press and hold volume - button and keep holding until device is in bootloader
cheers " - broncogr
Hope this helps someone.
Ez
Related
I was on Radio 2.10.50; i fashed radio 2.07.50 everithing was fine after the flash; then i run TASK29 by doloop; but after that the bootloader dont start, only the HTC star screen appears, i have to pull out the battery to reset the phone, and restart with the volumne down button pressed but still the same i tried almost 20 times but still the same.....
PLEASE SOMEONE HELP ME.....i flashed almost 40 times before and run TASK 29 before but this never hapened, im desesperated.....
take your battery off, wait 20 seconds. Put battery back in, hold Vol- and push power. ou will be at the 3 color screen. Connect the USB cable, get the 'USB' text below and flash a ROM.
Obviously you have HSPL, on the phone, right? you were able to do task 29..
bigE
Bootloader wont charge
Yes i have HSPL, but after the TASK 29, i think it have been deleted, now the bootloader does not exist, i tried pushind down and reseting the volume down, but without the bootloader, it wont start.
Maybe if i run a SHIPPED ROM from the SD card...???
dannytgt said:
Yes i have HSPL, but after the TASK 29, i think it have been deleted, now the bootloader does not exist, i tried pushind down and reseting the volume down, but without the bootloader, it wont start.
Maybe if i run a SHIPPED ROM from the SD card...???
Click to expand...
Click to collapse
i don't think run Task29 will delete bootloader. You should wait for better advices from someone in here before you try something else that you are not sure.
nope, that is not possible. Unless you have a malfunction with the phone, there shouls be a bottloader..
Do you hold Vol- (keep your finger on) at all times? you should not leave the button until phone wakes up at bootload. The power button can be pushed and be left after about 0.5 a second.
Another wild idea- maybe you battery is dead? try charging it for 15 minutes..
Thanks
Thanks for your advices man, im doing it, but nothing appears to work, im seriously deseperating, i dont know why the bootloader dont start.
Even more, before i run TASK 29, i ve entered bootloader directly pushing down the volume key and everything was fine; but now it seriously appear that the bootloader have been deleted or even i can acces it.
Ive read some other similar cases; and a lot report the same problem, after flashing a new radio, and then runing the TASK29, the bootloader,apparently have been deleted.
About the battery
About the battery, i also think that was the posible problem,because, it was abouth 60% when i flash the radio; and when i run TASK 29, i dont see how much it was,because, ive entered bootloader directly; but ive charged for about 1 hour and still the same the bootloader wont charge, i only get the damn HTC screen.....
I was thinking about flashing shipped rom fom the SD card, but thing it be imposible because to do HSPL (bootloader) is needed, and or my bootloader has deleted or is imposible to acces it so i think that will be a useless option
Posible solution
I think one posible solution was to install HSPL from SD card again; but i think it is imposible...but seriously i wish i was wrong about it.
OK then, try to flash a stock ROM, although i doubt you can.. Maybe you VOL- button isn't really pushed in? I am running out of ideas.. I have HTC phones for several years and never lost the bootloader. By definition the bootloader is a different component on the phone's board, and oe can not write to it from the USB interface (normally it is hardwire write protected). Do you have another battery? or did you try charging a bit?
dannytgt, what model of your device?
I think the answer is simple. When you ran Task 29, did u put the desired Radio in the same map? was it Called ruu_signed.nbu? if you didnt, that would explain why you have no bootrom.
I would run it again but this time with the latest radio in the same map. I hope it works for you man.
GL
TheOne741
BigE said:
OK then, try to flash a stock ROM, although i doubt you can.. Maybe you VOL- button isn't really pushed in? I am running out of ideas.. I have HTC phones for several years and never lost the bootloader. By definition the bootloader is a different component on the phone's board, and oe can not write to it from the USB interface (normally it is hardwire write protected). Do you have another battery? or did you try charging a bit?
Click to expand...
Click to collapse
you're right i cant install stock rom; i tried pushing the volume button every way posible, i ve charged the battery for about 3 hours exactly...still the same..
dannytgt, what model of your device?
Click to expand...
Click to collapse
HTC HD2 Euro Version, i was running Touch X-treme ROM
I think the answer is simple. When you ran Task 29, did u put the desired Radio in the same map? was it Called ruu_signed.nbu? if you didnt, that would explain why you have no bootrom.
I would run it again but this time with the latest radio in the same map. I hope it works for you man.
GL
Click to expand...
Click to collapse
You re right when i run Task 29, i dont have put the Radio in the same folder; i flashed the Radio separately, and then i Run TASK 29.
I tried to run it again. but its imposible, because I DONT HAVE THE BOOTLOADER, so its imposible....
i really apreciate your ideas, i really thanks all of you guys and i hope you will still sharing any ideas about unbricking my phone.
It gets really hard to get a phone like this in my country, i ve done a lot of effort...to have this phone...so i still dont give up about leaving it like that
TheOne741 said:
I think the answer is simple. When you ran Task 29, did u put the desired Radio in the same map? was it Called ruu_signed.nbu? if you didnt, that would explain why you have no bootrom.
I would run it again but this time with the latest radio in the same map. I hope it works for you man.
GL
TheOne741
Click to expand...
Click to collapse
The radio is not needed to start the bootloader.
Well, strange issue with your phone. You really can't enter the bootloader by holding vol down press power on and keep holding vol down?
There MUST be some kind of boot loader. i think without there would be a white screen.
If it is not opening in Boot loader try flashing rom using sync process if your hd2 is booting to Os. otherwise that is only way other have described you. Take battery out . Wait for 5 minutes. Put battery in n press Vol Down button and press power on button. your phone should on in Boot loader .
Some time it happens with me also. but automatically after 2-3 tries it loads in boot loader menu.. dont know what is the problem.. but whatever it is.. IS Strange..
Good Luck
Have you tried hard resetting your phone by holding both the up and down volume when you start? Task 29 deleted the rom so you will need to flash a rom, but if you cant enter bootmode, thats not possible..
Your problem seems to be quite unique. Almost makes me think it is the volume down button that is not responding well...
do you have your battery cover on when trying to press the volume down button?
If yes, try it without the battery cover on
The radio is not needed to start the bootloader.
Click to expand...
Click to collapse
Yes, i have used TASK 29 before, and no need for radio in the same folder;
Well, strange issue with your phone. You really can't enter the bootloader by holding vol down press power on and keep holding vol down?
There MUST be some kind of boot loader. i think without there would be a white screen.
Click to expand...
Click to collapse
I tried for about 100 hundreds time, but nothing happens, so i say before, when i useTASK 29 i've used the bootloader using the volume hardware keys, and it works perfectly
If it is not opening in Boot loader try flashing rom using sync process if your hd2 is booting to Os. otherwise that is only way other have described you. Take battery out . Wait for 5 minutes. Put battery in n press Vol Down button and press power on button. your phone should on in Boot loader .
Some time it happens with me also. but automatically after 2-3 tries it loads in boot loader menu.. dont know what is the problem.. but whatever it is.. IS Strange..
Click to expand...
Click to collapse
I ve tried syncing directly with PC, but it's imposible...totally useless the phone doesnt sync.
This **** never hapened to me before.....i've done a lot of times and the bootloader was always there....
Have you tried hard resetting your phone by holding both the up and down volume when you start? Task 29 deleted the rom so you will need to flash a rom, but if you cant enter bootmode, thats not possible..
Click to expand...
Click to collapse
yes, i've done this also, the power button does not respond; so i pull out the battery and then i put while pressing the vol key down...nothing happens....still no bootloader
do you have your battery cover on when trying to press the volume down button?
If yes, try it without the battery cover on
Click to expand...
Click to collapse
Yes i've also tried this
Your problem seems to be quite unique. Almost makes me think it is the volume down button that is not responding well...
Click to expand...
Click to collapse
Right now im on my girlfriend's house, but by afternoon i will disamble the phone so i'll activate the vol key down directilly, to run out the hardware key malfunction posibility
Thanks again, all of you guys, i ll try every advice you give me
I cant acept that my HD2 is killed.....but the options are finishing.
It's so ****ing rare, even i've scaped from my HD2 get stolen, a few times and now it gets kill by me...
dannytgt said:
I think one posible solution was to install HSPL from SD card again; but i think it is imposible
Click to expand...
Click to collapse
correct, impossible.
The phone wont go past the grey screen because there is no rom to load. Bootloader has NOT been overwritten,. task29 cannot do that.
Chances are you simply aren't entering bootloader correctly.
Take off the battery cover (to get a better press)
phone completely powered off.
press, hold and keep holding 'volume down' (not up and down, not up, just down)
tap AND RELEASE (dont release vol down) the power button
keep holding vol down
as soon as the three coloured screen appears, then release vol down.
once the word serial changes to usb, flash your rom.
i have a feeling your Vol Down button is not working. that's why its not entering bootloader. u going to disassemble your phone? hmm...be careful with that.
Bricked HD2
Would you be willing to ship it to me? I could have some fun trying to figure some stuff out since you're not having any luck.
hi, i am in need of som serios help, im a total noob n i flashed my first ROM with Duttys_Leo_Sense_2.5_5.21905.5.0.93_2.13_Radio_2.10.50.26_HG_V3.4.exe
i then last night decided i wanted to switch over to Miri_Steve0007_Elegancia_V8.5
and now the phone will not reset and has a million crashes! iv been trying to go back to the Dutty ROM bt it dosnt let me. can som1 upload what it is that i need to get the dutty rom bak. thank u in advance
when you say crashing, can you give a bit more info? is it locking on a cirtain screen? or in a constant reboot?
you may want to also read through a few of the stickys as if you use the search you most likley will find the cause.
RE: HELP!
More info would be appreciated but I've had issues before and did this:
Performing a factory reset using phone buttons
If you cannot turn on your phone or access the phone settings, you can still perform a factory reset by using buttons on the phone.
With your phone powered off, press and hold the VOLUME UP and VOLUME DOWN buttons.
While holding the volume buttons, press the END/POWER button briefly and then release it.
When you see a warning message on screen, release the VOLUME UP and VOLUME DOWN buttons.
Press the VOLUME UP button to perform the reset, or press any other button to cancel the reset.
From that my phone turned on and I was able to create an activesync connection again to flash another ROM.
__________________
Blog: jonathanstowell.com
Rasheduddin said:
hi, i am in need of som serios help, im a total noob n i flashed my first ROM with Duttys_Leo_Sense_2.5_5.21905.5.0.93_2.13_Radio_2.10.50.26_HG_V3.4.exe
i then last night decided i wanted to switch over to Miri_Steve0007_Elegancia_V8.5
and now the phone will not reset and has a million crashes! iv been trying to go back to the Dutty ROM bt it dosnt let me. can som1 upload what it is that i need to get the dutty rom bak. thank u in advance
Click to expand...
Click to collapse
I flashed many roms and never experience like that as long as you do it as per instruction/ guide in the relevant ROM.
I would suggest you to go into bootloader screen (turn of you phone, then press vol up and down together with the power on button).
Install HSPL (only if you havent installed it), perform task 29, flash the radio (check the radio version required by the ROM), and flash the ROM you want.
Everytime the process reach 100%, you press the vol down button to go into bootloader screen so you dont need to pull out the battery or the cable (but for the last process (flashing the rom), you should press vol down and up together (it will go to hard reset). And for better result, please make sure your battery above 50% and use win xp.
Hope you can solve it.
After freezing my device I tried to open but not opened then I tried to make soft reset again it didnt open then I tried hard reset but the normal menu didnt come instead the menu which is attached appear and telling something serial but not doing hard set now I dont know what I must do Please help
http://img594.imageshack.us/img594/2927/imga0024.jpg
http://img208.imageshack.us/img208/1889/imga0025n.jpg
Thats your bootloader.....
to do a hard reset its...
hold down volume up and volume down
tap and release power
keep holding both volume buttons down....
I think whats happening is that your only holding the volume down.
Try taking your battery cover off to get a better press and making sure that up and down are held, then tap the power button.........
hope that helps.....
help
Thanks for explanation but it is stilll not working and in addition today for solving this problem I tried to reinstall rom using cd card this case it is waiting at the (loading ) stage I dont know how can I solve this problem
Had any luck yet?...........
Ok, few more questions.......
What rom did you try to flash via sd card?
What rom were you using before it crashed?
Is it a tmous hd2 (green and red buttons?) or a "normal one"?
What happened to make it freeze crash?
Can you still get to bootloader? (the screen you posted above)
If you can then go to that screen and connect your phone via usb......
wait a few mins and let us know if the word "serial" at the bottom of the screen changes to "usb"........
If it does you should be able to flash a rom via your computer......
thanks for your help but Still I am not lucky
What rom did you try to flash via sd card?
WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship(2).exe
What rom were you using before it crashed?
HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe
Is it a tmous hd2 (green and red buttons?) or a "normal one"?
Yes Normal one
What happened to make it freeze crash?
nothing only I have re install sprite and rim backups (whic I had before) it started normally and while working freezed I closed and not opened it is staying and wait at (HTC guietly brillant ) stage
Can you still get to bootloader? (the screen you posted above)
Yes I can
http://rapidshare.com/files/409788656/serial.JPG
http://rapidshare.com/files/409788686/usb.JPG
If you can then go to that screen and connect your phone via usb......
wait a few mins and let us know if the word "serial" at the bottom of the screen changes to "usb"........
as seen above links I can connect as you describe
If it does you should be able to flash a rom via your computer.....
Unfortunatelly I can not I tried everything flashing rom, radio ,and task 29 in every case it not started wait as seen picture (only hspl worked)
http://rapidshare.com/files/409788488/pc1.JPG
http://rapidshare.com/files/409788523/pc2.JPG
and give connection error
http://rapidshare.com/files/409788826/pcer.JPG
if I had tried flash rom from sd card then freezing at loading stage
http://rapidshare.com/files/409788629/sd_card.JPG
during this time I learned many things ) but still my knowledge not enough to solve this problem please help !!!
ok have a look at this thread and see how you get on
forum.xda-developers.com/showthread.php?t=298516
try uninstalling actvesync from your pc...... then reinstalling it
would you be able to try and flash on someone elses pc?
im not sure if this would help or not but im running out of ideas im afraid....
My friend, if the phone starts at all you definitely should be able to do HARD RESET.
You are probably not doing well the hard reset. You cannot destroy bootloader with backup programs.
You should :
-hold pressed volume up and volume down buttons
-tap and release power button
-keep holding both volume buttons down for several more seconds until three color screen appears and shortly after that a message will appear on lite blue screen. Then release both volume buttons. Then press volume up button, usually it is necessary to press it once again. System restoring bar will begin to raise up to 100%. After that pres again volume up and system will restart.
By the way your initial rom is 1.66 but on the pictures is 1.48. So you did pictures after you flashed it. Also noted that you have flashed HSPL.
Suggest to download your initial original rom and install it from the memory card. Not sure but may be downgrade of the rom is not possible from 1.66 to 1.44.
I solved my problem
Thanks to masters very much I reinstall active sync and then I flash rom and all my problems cancelled out )
nice one, glad you got it fixed.....
kuwait said:
My friend, if the phone starts at all you definitely should be able to do HARD RESET.
You are probably not doing well the hard reset. You cannot destroy bootloader with backup programs.
You should :
-hold pressed volume up and volume down buttons
-tap and release power button
-keep holding both volume buttons down for several more seconds until three color screen appears and shortly after that a message will appear on lite blue screen. Then release both volume buttons. Then press volume up button, usually it is necessary to press it once again. System restoring bar will begin to raise up to 100%. After that pres again volume up and system will restart.
Click to expand...
Click to collapse
After bricking my phone, then my underpants ^^... you sir are a lifesaver.
thank you very much.
Thanks to masters very much I reinstall active sync and then I flash rom and all my problems cancelled out
bootloader problem
conantroutman said:
Had any luck yet?...........
Ok, few more questions.......
What rom did you try to flash via sd card?
What rom were you using before it crashed?
Is it a tmous hd2 (green and red buttons?) or a "normal one"?
What happened to make it freeze crash?
Can you still get to bootloader? (the screen you posted above)
If you can then go to that screen and connect your phone via usb......
wait a few mins and let us know if the word "serial" at the bottom of the screen changes to "usb"........
If it does you should be able to flash a rom via your computer......
Click to expand...
Click to collapse
I can get the bootloader but it keeps showing "serial" even after connecting it to to the computer.
the "usb" does not come and i cannot update the rom
currently i'm using hyperdroid GBX v11 which is working fine (just one problem that it shows blank screen after a call ends and no display till another call comes) please help
mirchandani84 said:
I can get the bootloader but it keeps showing "serial" even after connecting it to to the computer.
the "usb" does not come and i cannot update the rom
currently i'm using hyperdroid GBX v11 which is working fine (just one problem that it shows blank screen after a call ends and no display till another call comes) please help
Click to expand...
Click to collapse
Hmmm......
Try, using another USB port or computer.
Reinstall activesync.
Have you tried flashing from SD card?
Sent from my fingers to your face...
same problem
kuwait said:
By the way your initial rom is 1.66 but on the pictures is 1.48. So you did pictures after you flashed it. Also noted that you have flashed HSPL.
Suggest to download your initial original rom and install it from the memory card. Not sure but may be downgrade of the rom is not possible from 1.66 to 1.44.
Click to expand...
Click to collapse
i have the same problem, and my information on the screen is
PB81120 SSB3
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
any help? im hard rebooting cause idk the pasword and i cant get on the phone:crying::crying::crying:
To all of you having the "same problem"
If you are 100% sure your stock rom is correct. rename the .nbh file to LEOIMG.NBH, put it on the root of your SD card, and boot into bootloader, it will flash.
IF YOU ARE UNSURE IF YOUR STOCK IS CORRECT POST HERE FIRST OR YOU MAY BRICK YOUR PHONE,
better to look noob than to brick, there are too many versions of this phone to mess around here.
same problem and a bootloop
omranlibanon said:
same problem and a bootloop
Click to expand...
Click to collapse
Did you flash stock via SD?
yes i flashed via sd card its a nand rom TBD_Sensation_XL_Gen3_stock_V3.7
I was wondering if anyone out there can help me.
Im currently using Magloader Version 1.11 by cotulla 2010 and i would like to upgrade to MAGloader Version 1.12 so that i will be able to run Windows Phone 7, though i can't do this because in order to upgrade Magloader i have to be connected to Windows Mobile Device Center and i cant connect to it since im running NAND Android not windows mobile.
Can anyone help me ? Thanks!!
Isaac
Read
Look at this thread
http://forum.xda-developers.com/showthread.php?t=912416
You install MAGDLR 1.12 the same way as you installed MAGDLR 1.1.
Read through the forums and use some common sense.
Hopefully a slightly more helpful response...
To place the HD2 into Bootloader mode, remove the HD2's back cover hold down the volume down key, now press in the red reset button under the back cover to the bottom left of the SIM, release the soft reset button but continue to hold the volume down key in until you are presented with the tri colour bootloader screen. To exit Soft Reset the device.
shovels said:
Hopefully a slightly more helpful response...
To place the HD2 into Bootloader mode, remove the HD2's back cover hold down the volume down key, now press in the red reset button under the back cover to the bottom left of the SIM, release the soft reset button but continue to hold the volume down key in until you are presented with the tri colour bootloader screen. To exit Soft Reset the device.
Click to expand...
Click to collapse
Thank you so much for your help ! Will try to do asap, so once i enter the bootloader screen windows will detect my phone and i can update my Magloader ?? Thanks a million for your time and help !
I cant access bootloader (tri-color screen) i have magldr 1.11 i have flashed three different versions of android ....same result freezes on android logo...and i have tested those builds they do work on my other htc hd2 ....i have alse flashed windows7 but same result comes back to magldr screen......any help would be appreciated
im sure the bootloader is before Magldr in sequence so if that is loading you should be able to load the bootloader. You are holding volume down while turning on aint you? What radio are you using?
Ricey
thank you for your quick reply......yes I am holding volume down it doesn't wanna work i have also tried hard reset and it just goes directly to startup screen....and i know i am not doing anything wrong because i can access bootloader on my other HTC HD2....
deziguy420 said:
thank you for your quick reply......yes I am holding volume down it doesn't wanna work i have also tried hard reset and it just goes directly to startup screen....and i know i am not doing anything wrong because i can access bootloader on my other HTC HD2....
Click to expand...
Click to collapse
Does the volume button work once the phone has booted up?
Ricey
Sent from my HTC HD2
yes volume button work that's how i flashed android on it
Same issue here.. not able to see the three colur screen +1
try holding both volume up and down than volume up to clear data than reboot hold down the button for tri-color bootloader. thats if holding both buttons work than task29 and start all over. please dont scream at me im only giving a suggestion as i havent had this problem yet( hope not at all).