Q: Nexus 4 does not show up in device manager - Nexus 4 Q&A, Help & Troubleshooting

Hi Everyone
I have a strange issue on my xp machine (windows 8 is fine). On my xp machine, when I plug in the nexus 4, the machine does not even respond, its as if it does not exist. I looked in the device manager but nothing showed up. No warning, no error, it simply does not exist to this machine. At this point I don't even want ADB enabled, so I've disabled the developer options. I just want normal MTP to show up as a drive on xp.
I've made sure that Settings -> storage -> Three dot menu button (top right) -> USB Computer Connection is set to MTP.
I'm not sure what else to try except reset my device (which I want to avoide). As I said, this is only on the xp machine.
thanks for the help

Related

Cannot connect to Windows Vista - Orange SPV M700

Hi all I've owned this great phone since they first came out.
I had Vista on my machine then and I synced it up no problems.
2 Days ago I did a fresh install of Vista when it was all done my phone synced up again fine.
However yesterday I did a final fresh install just so I could get it just the way I want it without excess programs on.
However now my phone will just not connect.
I'm good with PCs however I'm stumped. It makes the ding sound when connect however WMDC does not recognise.
I have the latest WMDC x64 patch installed. Any pointers would be greatly appreciated.
PS. this is a great forum
Si
Can none of you Trinity gurus help??
Or point me to another forum which might have info I require on.
I am also having problems connecting to vista - windows mobile device centre, with my M700.
When I connect to the PC the driver installs as Microsoft Windows Mobile Remote Adapter, and the device centre does not reconise that the device is connected.
Does anyone have the correct driver they could pm me or post a link, or any fixes.
pda's dont use real drivers they use generic drivers (1 driver for all of them)
that driver comes with the sync program
many many pda owners have issues with vista
by no fault of their pda's
Hmmm try do a window update or use another usb port
I have managed to resove this issue by clicking on:
Start>Settings>Connections>USB to PC> Then unticking the option "Enable advanced network functionalaty".
I had a similar problem when I tried to connect my brothers m700 to my p.c. using vista etc... It only recognised my m700 that was sync'd with it earlier and not my brothers for some reason, weird. No matter how many times I rebooted the p.c. or his m700 it would not sync at all, it just did not recognise that it was connected via usb.
mdyson said:
I have managed to resove this issue by clicking on:
Start>Settings>Connections>USB to PC> Then unticking the option "Enable advanced network functionalaty".
Click to expand...
Click to collapse
I had the same problem when I first got my P3600, after I did this it worked fine.
If Windows Live OneCare is installed on your machine, it may be blocking the device connectivity. Please click here for the steps to configure Windows Live OneCare to allow the device to connect.
The driver installation may not have completed successfully. If you think this may be the case, follow these steps:
Keep your device connected
From the desktop, go to Start > Start Search
Enter "Device Manager" or "devmgmt.msc" to launch the Device Manager window
Look under the "Network adapters" node for "Microsoft Windows Mobile Remote Adapter". If this is not present, skip to step 5. Otherwise, right-click "Microsoft Windows Mobile Remote Adapter" and choose to "Uninstall"
Look under the "Mobile Devices" node for "Microsoft USB Sync". If this is not present, skip to step 6. Otherwise, right-click "Microsoft USB Sync" and choose to "Uninstall"
Disconnect and reconnect your device. Your device driver will re-install and Windows Mobile Device Center will launch.
Good Luck!

At a loss with activesync

I'm at a complete loss with activesync. I've done everything I can think of and I can't get my computer to see my 8525. I've reinstalled activesync and hard resent my device. When i plug in it says
one of the usb devices attached to this computer has malfunctioned and windows did not recongnize it
usb root hub (2 ports)
- unknown device
- usb composite device
Am I missing some sort of driver somehow? I don't know what to do..please help.
Hey i had the same problem. Is this your first time installing/using activesync??
Well what I did was this:
-Install activesync 4.2 from the CD (CD that came included w/unit).
-Uninstall activesync 4.2 (don't delete any drivers installed by the CD)
-Install activesync 4.5 (download it from Microsoft Website)
-Plug in your 8525 to the PC via USB cable, and your PC should NOW recognize it.
This is what I did and it helped. There may be a better/alternate way in doing this, but I FINALLY got Activesync to work!
Oh and see if you can help me with the prob. that I'm having.
http://forum.xda-developers.com/showthread.php?t=383065
Ya I can't find the CD that came with my phone for the life of me.
ok found disc and tried that. Nothing. Could my phone be broken?
heres what I had to do to get AS working again.
Delete the current version of AS from your PC
Go into c:/wondows/program files and delete the AS folder (Windows may not let you delete some DLL's.
Go into the registry and delete any AS entries you can find, or do what I did and use Ccleaner registry clean up program (Google it, it's freeware)
Restart the PC
Install AS 4.2 from the AT&T/Cingular disk.
Install AS 4.5 from MS.
Hook up your 8525 and all should be well.
Tried that....didn't work.
Still hoping someone has some advice. I've tried two different usb cables and used different ports as well so it's not that.
quick update...
I searched through the forums and googled a few things and from what I can tell other people have had this problem and not found any solution. I am considering trying bluetooth but I don't have bluetooth for my PC...can i get some sort of adapter? Also...Is there a specific driver I can download for the HTC hermes that might fix this issue?
Yea your situation sounds like the one I used to have.
Do you have a firewall?? If so DISABLE it. I have COMODO and even though I would press "accept", the drivers wouldn't install completely.
This is what I did:
-Start your PC.
-Uninstall Activesync through the Add/Remove.
-Delete the Microsoft Activesync folder in the Programs folder.
-Restart your PC
-Wait till your firewall loads up. Disable it.
-Go through the procedures I mentioned in my 1st post.
Oh and make sure you have internet access. I'm not 100% sure if internet access helps, but it could help with the drivers.
Even though I just got my 8525, I don't mind helping someone
tried that. no go. I think i'm going to just have to get a new phone.
Did you try disabling the Advanced Network Functionality?
START -> SETTINGS -> CONNECTIONS -> USBtoPC
Yes. when I do that it makes windows see my device, but windows does not know what my device is. Thats why I think some sort of driver might be missing, but I don't know how to fix that.
branden7 said:
Yes. when I do that it makes windows see my device, but windows does not know what my device is. Thats why I think some sort of driver might be missing, but I don't know how to fix that.
Click to expand...
Click to collapse
So... with the RNDIS checkbox UNCHECKED and your FIREWALL OFF, you get the USB Device not recognized error? In that case, ENABLE it and look at these other settings:
1. In the PPC open ActiveSync, then select Connections... from the menu and make sure the Synchroinize ALL PC's using this connection: USB option is checked.
2. In Windows (XP) check your ActiveSync connection settings (see image).
3. Did you try the AS 4.5 Connection Trouble Shooter?
4. You should also try another computer, just to double-check.
There is no driver to make AS work, AFAIK. Question: What happens when the RNDIS checkbox is enabled? Does Windows report an error or simply doesn't connect?
Tried all of those things, still device not recognized. I do need to try another computer but unfortunatly do not have access to one.
When i click that RNDIS checkbox nothing of interest happens. If it's clicked on when i connect windows very briefly see's the device (although it's not recongized) and then the little symbol for unknown device on my taskbar dissapears. If I then click it off windows will again see the device and the little symbol on my taskbar reappears, but it still doesn't recongnize the device.
Wow. That's a strange problem you have there. At this point, it could be a hardware issue. You could try installing WM5Storage or CardExport just to check if the USB hardware is working (bad cable?). Also, try checking your PPC registry, specifically, HKLM\Drivers\Usb\FunctionDrivers. It should look similar to mine (see pictures attached). I believe these keys tell Windows what to do with the device when connected thru USB. Other than that, try a flashing a new ROM from the SD Card, something like VP3G's which is known to work correctly.
Branden,
I have this problem from time to time. My solution is as follows: make sure the usb cable is connected to both the phone and the computer, even though you are getting the unrecognised error message.
Reboot the phone (soft reset) while still attached to the usb cable. Do not rush anything. Input any unlock passwords when prompted by the system but be aware that booting up can be slow, so give it time.
Once the phone has booted up you should then see activesync kick in. You may have to try this several times before it works but it always works for me.
One thing I would advise is to disable/deinstall any auto locking software, eg S2U2. These tend to kick in on long synchronisations and throw the usb status out.
Hope this helps.
WB
Hi! You didn't by any changeuse memmaid or something to clean up the notification queue? (if this sounds like gibberish, you probably didn't) Let me know!
branden7 said:
Tried all of those things, still device not recognized. I do need to try another computer but unfortunatly do not have access to one.
When i click that RNDIS checkbox nothing of interest happens. If it's clicked on when i connect windows very briefly see's the device (although it's not recongized) and then the little symbol for unknown device on my taskbar dissapears. If I then click it off windows will again see the device and the little symbol on my taskbar reappears, but it still doesn't recongnize the device.
Click to expand...
Click to collapse
Same Problem
Just to let you know your not alone ...
I am having the Exact same problem at the moment .... fortunately i do have access to another PC ... My Laptop connects to it with no problems what so ever .... so it obviously is a PC issue and not a Phone issue
I too have tried all the currently posted attempts at a solution to fix it but so far nothing has worked ... i am beggining to think that i may have to do a fresh intall of XP and that would Phiss me off
So any further suggestions would be doubley appreciated
Tried everything mentioned since my last post and still nothing. Also I am now getting the white screen issue again (Which I fixed originally by buying another hermes that had a crushed usb port and swapping the screens out). I think I may be about ready to move on to another phone as this is now my third major problem with this model of phone (although one of the problems may be an issue with XP).
I had the same problem. I updated my WM5 to WM6....and it stoped syncing with my computer. Went back to exchange it. Later, I learned it wasn't the problem with the phone syncing.....here's how you can fix the problem.
Click on Start>Settings>Connection Tab>USB to PC
Uncheck "Enable advanced network functionality"
Click on "ok"
I just upgraded to wm6 again and followed these steps....now it syns fine.
It worked for me.....hopefully it will work for you.
Peace

Activesync 4.5 Problem: won't connect to my device anymore

so i thought i'd give vista's "windows mobile device center" a try on my vista laptop, and wasn't surprised to find that i couldn't get it to recognize my phone. i was surprised to find that the xp computer that i've been using with activesync for a long time suddenly stopped recognizing my phone as well.
up to now i've hard reset phone (dcd 3.04, 3.37 radio) and reinstalled activesync 4.5. no dice. please if anyone can help me troubleshoot this thing i'd be way grateful. why has my phone stopped communicating with my computers?
For WM 6 devices, on Vista you must upgrade to Windows Mobile Device Center 6.1.
i downloaded and used 6.1 on my vista machine, but it didn't work. any other ideas? i think there may be something that changed on the phone, because now, activesync won't work either...
...bytheway, the phone will charge when plugged into either, but that's about it.
...bytheway, the phone will charge when plugged into either, but that's about it.
Click to expand...
Click to collapse
Just for ****s and giggles, have you tried the following:
1. Using a different usb port
2. Blowing the dust out of the port on the phone
3. Using the Y adapter that came with the phone in between the sync cable and the phone
First, plug into the USB, wait for the Windows new device chime, see if anything occurs in the WM Activesync.. If no Activesync connection is made (after the 'connecting' has stopped) then unplug and plug in back in another USB port. Do that at least 4 times (cycling between ports...even the same may eventually work) to see if you have a success.
Restart your PC, Soft-rest your phone and try again.
If still nothing, then don't bother plugging your phone in and then Run As An Administrator the attached batch file and then under View 'Show Hidden Devices.' You'll now see all devices that have ever been installed and retained for your OS, with the faded devices as those not currently attached/active.
Rather than the batch file you can open up a Command Promp Window with Administrator access (Start\Programs\Accessories\Right Click on Command Prompt and Run As An Administrator)
(I usually keep that batch file accessible in the root of my OS partition, just to keep it easy to clean out legacy device drivers that can cause problems.[/i])
Enter:
set devmgr_show_nonpresent_devices=1
start devmgmt.msc
Uninstall
Network adapters\Microsoft Windows Remote Adapter
Portable Devices\PocketPC
Then under Programs & Settings uninstall the Windows Mobile Device Center upgrade, and then reboot your PC. Reinstal that Device Center 6.1 update and then again connect your phone with the USB. (for the XP machine you can do all of the and unistall/reboot/reinstall the ActiveSync 4.5.
(note to self or another.....these steps to be added to the Wiki for ActiveSyn issues)
well, i'm thinking that the "****s and giggles" have it. i blew into the port, plugged her in, and it connected to my xp machine, just like days of old. after about 3 minutes though, the connection dropped, and i've not been able to get it going again since. i think this rules out any software/settings problem, and looks like it's a hardware issue. i'll try cleaning it one more time a little later, and if no go, i'll have to figure a way to re-flash the stock rom (i only have a 6gb card...) and send the beast back. thanx for the input, guys (specially keystone, dang man that was one badass post with some instructions that will help someone, i'm sure.)
Do you have the Y adapter that came with the phone? The one with the audio jack and the 5 pin mini usb on one end and the 11 pin mini usb on the other? The reason I ask is because for some reason HTC decided to put an 11 pin mini usb connector on our phones, yet supply us with a data cable that's standard 5 pin mini usb. If you have it, just humor me and try it and see if it keeps the connection.
Oh and P.S....the "****s and giggles" wasn't just a shot in the dark. I've solved many activesync problems for people before using all 3.
I actually hadn't used the cord without the Y-adapter untill today. both ways yeild the same result.
Another Activesync problem
I've been on vacation the last week and while away i had to do a clear storage..anyway, my phone was fine but when i connect thru activesync i get an error code : 85010014 and my contacts list doesnt get updated...:S can anyone out there give me some advice or do i hafto start from scratch?
Also is there a way to find my contacts on my comp?
jinx01 said:
so i thought i'd give vista's "windows mobile device center" a try on my vista laptop, and wasn't surprised to find that i couldn't get it to recognize my phone. i was surprised to find that the xp computer that i've been using with activesync for a long time suddenly stopped recognizing my phone as well.
up to now i've hard reset phone (dcd 3.04, 3.37 radio) and reinstalled activesync 4.5. no dice. please if anyone can help me troubleshoot this thing i'd be way grateful. why has my phone stopped communicating with my computers?
Click to expand...
Click to collapse
Well the hoop jumping is fun and all but I think if you uncheck the "Enabe advanced network functionality" in Start > Settings > Connection > USB to PC it may help.
Damn! That was simple. I unchecked the "Enabe advanced network functionality" box and I'm up and running! I'll save the hoops for later. Thanks!
treeboy said:
Well the hoop jumping is fun and all but I think if you uncheck the "Enabe advanced network functionality" in Start > Settings > Connection > USB to PC it may help.
Click to expand...
Click to collapse
This is the fix almost 90% of the time......
treeboy said:
Well the hoop jumping is fun and all but I think if you uncheck the "Enabe advanced network functionality" in Start > Settings > Connection > USB to PC it may help.
Click to expand...
Click to collapse
Worked for me. Thanks!
ok ive tried all except the hidden devices thing (gonna try it now) and no go will post if it works oh im on DCD's 3.2.6 rom and the 6.1 of device center and i dont think it has anything to do with it but i just installed 2007 outlook
treeboy said:
Well the hoop jumping is fun and all but I think if you uncheck the "Enabe advanced network functionality" in Start > Settings > Connection > USB to PC it may help.
Click to expand...
Click to collapse
Hi, thanks that work for me fine too
my mogul has been giving me crap with vista and xp for weeks. Nothing can solve it. I've re-flashed, downgraded, used different ports, different cables, modified the USB to PC settings.
Add this to the list of things that randomly seem to be a problem for this phone.
I had a similar situation, none of the software based suggestions fixed it. Wiggling the cord around would sometimes connect, but soon thereafter, my phone stopped charging. The USB port was the culprit, so be careful.
I'm sure everyone who was having troubles figured out solutions, just thought I'd add in my dealings with this.
I just had the phone activated today (yes I bought used) and brought it to work to sync with my work outlook, well the usb cord would charge the phone but give me nothing but errors in the way of actual data connection. I was a little bummed this afternoon thinking I bought a partially broken phone. But WHILE HAVING THE PHONE CONNECTED ( I bold because I had done this multiple times while not connected and had no results) I opened the Comm Manager and clicked on the sync button at the bottom, suddenly my computer could recognize my device and I was sync'ing like a mad man.
Very possibly a stupid thing I should have done from the start, but I don't know any better since I'm brand new to all of this. I only post in hopes of helping another bummed out soul as was myself
I an running a HTC TyTN-II 4550 phone (WinMo 6.1) on a desktop PC (WinXP).
I couldn't get Activesync 4.5 to work either, but there were obvious reasons--my version of Office 2000 isn't supported (2003 is the earliest, I think) and IE and Outlook are not set as my default mail clients (-and that's how I like it-).
I didn't really need Activesync but I did want to be able to get files on and off the phone from my desktop PC through the USB cable. When I'd connect the phone, Activesync would automatically start up and spin the little logo for a while and then say "connection couldn't be made" and then I couldn't do anything--even move files on and off the phone.
What I found works is this:
1) open the Task Manager, and kill the wcescomm.exe process.
2) navigate to the folder that Activesync is installed in, and run the file named WCESMgr.exe.
3) that will popup a window, asking if you want to sync, or cancel. Press [cancel]
4) the normal Activesync window will come up, and the choices for "Sync" and "Schedule" will be greyed out, but the "Explore" button should work.
Sometimes I can disconnect and reconnect the phone without going through steps #1-#4, but not always.
With the "Explore" window you can drag files on and off the device.
I tried dragging small Word and Excel docs on and off; both converted properly when dragged onto the phone, but only the Word file would convert again when dragged off.
The phone will access the internet through the USB when hooked up this way, also.

HELP - cannot sync to windows 7 starter

Ive bought a netbook running windows 7 starter, now my hd2 wont connect with windows mobile device center.
I originally set up the pc synch(activesync) with an xp laptop and now it wont connect with the windows 7 netbook.
The phone is telling me to install activesync , but i cant because i have to install the newer windows mobile device center WTF
Ive deleted the old connections on activesync on my phone.
Is there something new to download to my hd2?
Any advice?
Thanks
windows mobile device centre does the same as activesync. it is the new name for activesync used on win 7.
i use the starter edition also on my netbook and cannot get mobile devicecentre installed for some weird reason. probably a problem on my netbook
started using ms myphone for the things i used mobiledevice centre for.
There must be way to connect the phone to a Windows 7 starter netbook.
I plan on doing a hard reset and want to preserve all my bookmarks, and also want to flash a ROM , I'm sure ill need to sync my phone to a computer for that?
The phone keeps telling me to install activesync on my pc even though I have to use wmdc.
When I reinstall wmdc on the netbook I keep getting an error and it won't install properly.
It says device manager not installed, or something like that .
It's a bloody mystery!
for flashing a rom you do not need activesync or mobile device centre. I flash my phone from my laptop without. just put the phone in bootloader and you can flash a rom as normal using the custom ruu. alternatively you can flash from memory card.
think ms myphone can backup that also but you have to check to make sure.
on my sig there is a flashing guide, in it there is a download for win 7 windows mobile device center run it and you should be good to go
this has been discussed so often, if you had taken the time to search there would be no need for that thread!
It so easy, just use windows update to download the driver and windows mobile center and that's it. If it doesn't work you are doing it wrong because it works for everybody else that way!
pabloh999 said:
Ive bought a netbook running windows 7 starter, now my hd2 wont connect with windows mobile device center.
I originally set up the pc synch(activesync) with an xp laptop and now it wont connect with the windows 7 netbook.
The phone is telling me to install activesync , but i cant because i have to install the newer windows mobile device center WTF
Ive deleted the old connections on activesync on my phone.
Is there something new to download to my hd2?
Any advice?
Thanks
Click to expand...
Click to collapse
Leave ytour phone, as the problem appears to be with the netbook. make sure your netbook is not connected to the internet, then disable all the security and see if WMDC recognises your phone.
Thanks for the respones, ill try those tips when I get a chance later in the day.
Apologies for starting a new thread if its been discussed many times before.
Right, i think ive tried everything.
Hard reset my hd2
Uninstalled wmdc
Did every windows update available
re-installed wmdc with webroot antivirus turned off and internet access turned off.
And it still wont recognise the hd2
When its installing the driver on my netbook for the hd2 it keeps getting an error - it says "unidentified device : device unplugged" even though it is plugged in and screen is on.
The phone will connect to my netbook for the disk drive option and the internet sharing option, so i dont think its a problem with the hd2 usb connection
Its a real mystery, anyone out there able to crack this one?
have you tried this?
settings, menu, all settings, connections, USB to PC, uncheck "enable faster data sync", click done.
when I did that, my HD2 finally connected to PC after DAYS of trying!
Yep! I sure have
The computer is just is not seeing my phone with the the activesync option, but it is seeing the phone with both the disk drive and internet sharing options.
When i try un-install wmdc some errors keep popping up, i have to manually go into the task manager and kill 2 .exe active files otherwise it wont uninstall, very strange indeed
Maybe it could be a usb port issue, but i have tried all 3 usb ports on my netbook.
Hi pabloh999,
I potentially have a fix for you. I experienced the same errors as you tried all you have and eventually found a fix - by accident!
Set to airplane mode on & then off. After this my connections & syncs were fine.
Let us know how you go.
pabloh999 said:
Yep! I sure have
The computer is just is not seeing my phone with the the activesync option, but it is seeing the phone with both the disk drive and internet sharing options.
When i try un-install wmdc some errors keep popping up, i have to manually go into the task manager and kill 2 .exe active files otherwise it wont uninstall, very strange indeed
Maybe it could be a usb port issue, but i have tried all 3 usb ports on my netbook.
Click to expand...
Click to collapse
Tried that and - nothing!
Its just not recognising my phone, its saying "device unplugged"
I even turned off the charging function when plugged into a pc, just in case that was draining too much juice from the usb port.
No problem solvers out there??
I am thinking now it could be a problem with the usb ports on my netbook.
On one of my million attempts i got a windows error message saying that i should use a high speed usb port, and it gave me a list of "high speed" usb ports on my computer.
I dont know how to use this information because it doesnt physically show which of my 3 usb ports is the "high speed one(s)"
I thought the three of them are the same?
I tried updating the usb drivers to no avail
Fu**ing pissin me off!
Sync with Win 7
Same problem here, Tried everything on the web and on XDA and still cant sync.
Is this a Microsoft Problem, Oh by the way dont agree with d3l1
Ican still sync with my old XP laptop, but my new Win 7 is crap... (Both are Asus machines)
Any pointers would be welome. Ta.

[Q] MTP PTP option not displayed - Resolved

Fixed.. Leaving this for others since I couldn't find it via a search. - It's under Mass Storage > Settings (3 dots upper right) > USB Storage Connection. Some how it stopped displaying.. I think because I unchecked both by accident?
Out of the blue, I cannot access my phone via usb. I noticed an exclamation next to "Nexus 4" under other devices. No clue what happened as it's always worked. So I've removed the device to reinstall. The device is not being recognized at all with USB debugging off..
When I turn on usb debugging, it'll show up in device manager under Android Device > Android ADB interface.
I have uninstalled/reinstalled multiple times to no avail. One thing I noticed is that I do not get the option to select MTP or PTP.. I believe I have it narrowed down to this being related. Any idea how to get that option back? I found a tip via the dialer on the S3, didn't work tho..##diag# or something like that.
Any ideas? ThADVANCEks

Categories

Resources