Hi
I can't update any software's that have been installed on my cellphone.
In fact in the middle of updating, suddenly it is cancelled. and this message is shown that "Attention required".
What should I do?
By the way, my cellphone rom is dynamic v2.
Related
HI, I downloaded to new rom from clubimate ftp site and unzipped the file and tried re-installing the new rom again as a fresh copy. I had all kind of issues doing this.
On the progress bar it goes red at 1% and then blue and continues progressing to 4% and then turns red again and then afterward turns back blue colour and then continues progressing until 85% and stays red and then a message appears:
"ERROR [326]: The NBF file cannot be used for your pda phone please check your NBF file."
I then disconnected my jamin and took the power out and left it for 10 mins and put it back in and tried the whole process again and even deleted the unzipped copy and unzipped it again but still getting issues sometimes ERROR [326] and sometimes "ERROR [302] UPDATE ERROR The Rom Update utility has encountered communication errors during the update process. the program will give you step-by-step to recover from the errors so you can continue with the update" I followed the steps and that took my back to the progress bar but will not complete and throws up one of the errors again.
Exactly the same happened last night when I tried this and eventually able to load the new rom but it was giving me all kind of issues mainly crashing and screen freezing all the way white when I synch or generally using it. I am sorry for this long tread but I am very frustrated with my jamin device I feel like throwing it against the wall. Please can anyone shed some light into this subject and if it is software related or hardware? much appreciated
I suggest you download the ROM again from xda ftp site. My first download ROM was corrupted and hang my upgrade. Since I download again, the upgrade went smoothly.
I am trying to upgrade my PPC-6700 from WM5 (Stock Sprint ROM) to WM6.5 (Vanilla ready for bootloader v1.00). Upon executing ROMUpgradeUt.exe it detects the previous ROM version from the device and the new ROM version, and exits with an ERROR 120: COUNTRY ID ERROR.
After searching around I came across MaUpgradeUt_noID.exe, which after editing RUU.conf and adding the "[CHECKCEID_TYPE]=1", upon executing does not detect the previous ROM version only the new one. After clicking Next it instantly goes to a successful screen, the bootloader shows upgrade successful but absolutely nothing has happened to the device. Rebooting it brings me back to WM5 -- I didn't even see a percentage bar.
I am using Windows XP with ActiveSync 4.5 on a brand new installation just to bypass any weird Windows Vista/7 RUU issues. I am at a total loss on this Country ID error. I have tried several ROMs.
Any ideas?
Hi, I need some help from you guys. I flashed WP7 for my HD2, everything was good. But I accidentally unregistered my phone by 'Windows Phone Developer Registration'. And I failed to register it again.
'Error communicating with the developer portal. Please set the correct data and time on the phone, check the Internet connection and try again later (ErrorCode:0x64)' was the error message.
And I failed to flash the ROM or reinstall the MAGLDR113 once again on my phone.
'Error Description: USB init failed; Info: .\RSPL\RSPL.cpp(1198)' was the error message when I tried to flash the ROM again.
How can I fix my problem?
zhaoch25 said:
Hi, I need some help from you guys. I flashed WP7 for my HD2, everything was good. But I accidentally unregistered my phone by 'Windows Phone Developer Registration'. And I failed to register it again.
'Error communicating with the developer portal. Please set the correct data and time on the phone, check the Internet connection and try again later (ErrorCode:0x64)' was the error message.
Click to expand...
Click to collapse
Similar problem here.
I flashed my HD2 with a custom ROM that already had the jailbreak baked into. Yesterday I purchased a developer program membership and thought I might legally register the phone.
I startet the registration tool from the Windows Phone Developer Tools and it said the phone was already registered. I managed to successfully unregister the phone but then, when trying to reregister it using my Live ID, I got the same error message (ErrorCode:0x64).
A lot of people at the developer forum on MSDN are complaining about this error as well. A couple of them said the registration tool wouldn't work on 64bit Windows. Some of them installed Windows 7 x86 on a virtual machine and tried to register their phone from there and it worked.
I am going to give it a try, too.
Did you have any success in the meantime?
Hi,
I have been trying to update my HTC HD MINI (Photon) to the stock rom but without success.
I have downloaded the official .exe file from HTC, and followed the steps, but when it goes to start the update process, the HTC goes to the 3 color display, loses the active sync connection, and the program gives and error doe to the lost of communication. I have tried letting the 3 color screen and updating but without the active sync, it does not start.
What am i doing wrong?
Best regards
whats the error code number?
is your phone carrier locked?
Hello all,
I have a new HTC M9+ and I checked for OTA Update. The device found the new 1.90.401.3 version and the download startet. When I want to install the routine starts and the device is booting into bootloader. After a while a red triangle is blinking and the device stucks.
AFter many negative retries I found a error message. According to this message the device seems to have a wrong source image??? I can not understand the message:
"package expectsbuild fingerprint of htc/hiau_ml_tuhl_htc_europe/htc_hiau_ml_tuhl:5.0"
"this devicehas htc/hiau_ml_tuhl_htccn_chs_2......"
Does anybody understand this message and how can I get the right image??
Many thanks in advance
Ruediger