HI, I downloaded to new rom from clubimate ftp site and unzipped the file and tried re-installing the new rom again as a fresh copy. I had all kind of issues doing this.
On the progress bar it goes red at 1% and then blue and continues progressing to 4% and then turns red again and then afterward turns back blue colour and then continues progressing until 85% and stays red and then a message appears:
"ERROR [326]: The NBF file cannot be used for your pda phone please check your NBF file."
I then disconnected my jamin and took the power out and left it for 10 mins and put it back in and tried the whole process again and even deleted the unzipped copy and unzipped it again but still getting issues sometimes ERROR [326] and sometimes "ERROR [302] UPDATE ERROR The Rom Update utility has encountered communication errors during the update process. the program will give you step-by-step to recover from the errors so you can continue with the update" I followed the steps and that took my back to the progress bar but will not complete and throws up one of the errors again.
Exactly the same happened last night when I tried this and eventually able to load the new rom but it was giving me all kind of issues mainly crashing and screen freezing all the way white when I synch or generally using it. I am sorry for this long tread but I am very frustrated with my jamin device I feel like throwing it against the wall. Please can anyone shed some light into this subject and if it is software related or hardware? much appreciated
I suggest you download the ROM again from xda ftp site. My first download ROM was corrupted and hang my upgrade. Since I download again, the upgrade went smoothly.
Related
If I have overlooked the thread that covered this situation, please just point me to it as I have made several searches and read several threads but no luck.
I was happily running a custom 2003 ROM with the original AT&T stack. As I was quite happy with the way my 2003 OS was configured and operating, I decided to just try the NEW AT&T radio stack as I wanted to see if it helped with some reception issues I have expereinced. I copied the four radio stack files to the Windows directory on the PPC. I had the PPC in its cradle for power. I then executed the RSUupgrade and at 10% it locked down completely. No hard key had any effect and in fact, not even the soft boot buttom worked. I then attempted a cold reboot and that resulted in a hung machine again.
So, I decided to take the safe route and do an SD flash burn back to the original AT&T ROM (which I had copied way back when). Using XDA Tools I burned it to my SD card. Did the soft/on button routine, and proceeded to flash the memory. If indicated that the checksum matched and was finished. After the cold reboot, I got the old splash screen, but it took forever for the today screen to appear and the START button as well as ALL the indicators at the TOP are missing. I am unable to get to file manager.
I then decided to see if I could connect via ActiveSync. I uninstalled AS3.7. and reinstalled the original 3.5. When I attempt to connect, AS does see that the PPC has been docked, but it is never able to connect.
So, I am unable to reinstall a radio stack of any kind. I am unable to get the OS to function normally.
BTW, Just for grins I also tried an SD card install of the newest AT&T ROM as well as my custom ROM and the results are all the same. I suspect the now corrupted radio stack, but HOW do I purge it and start over when I can't get the OS to boot sufficiently to reinstall the stack
ANY IDEA? HELP!!!
Come on, someone has to have an idea
I will start off with an update. After reading another thread, someone mentioned that initial boot was taking about 15 minutes when there was NO radio stack. I decided to see if that might be occurring to me and sure enough, after about 15 minutes, the PPC beeped and the OS came up. If was still a bit sluggish, but operational. I was able to successfully attach to my PC via ActiveSync.
Now for the downside. Still NO success with installing the radio stack. I have tried reflashing the OS back to the original AT&T PPC2002 OS but that made no difference. I have tried both the original radio stack and the new one, no difference. I have tried to install the stack with the SIM card (SIM not SD) in and out, no difference. It always sticks at 1%, tells me the upgrade failed and to press ok to reboot. I did read the thread that gave LOTS of help regarding this issue, but nothing seems to help. I can remove the lnk in the startup folder, delete the files, reboot, recopy via ActiveSync, start the upgrade (RSUpgrade.exe) and everytime it immediately goes to 1%, sets there a minute or so, the pops up the failure message.
Surely, someone has an idea. Could a corrupt SIM cause this? Is there a alternate way of installing the radio stack?
BTW, just for grins, I thought I would try doing a "normal" exe upgrade since AT&T posted such. I know that it is full of risk, but at this point, I had little to loose. I made sure that I was running ActiveSync 3.7.1 and was connected. I then launched the upgrade. It came up with a splash screen with some warnings and the typical stuff. I then selected the "next" button and nothing happened except that cursor (when pointing in the window) went into the "working" state where it remained until I finally killed it about 30 minutes later. There was NEVER any sign that progress was being made.
HELP!!!
david
I have the same exact problem.
The Start menu is missing. No Icons on the top bar.
What's funny is that the screen seems to be inverted.
When I tap close to the bottom of the screen, the clock setting screen appears.
Anybody have a solution?
I suspect there is an alignment problem
When I first boot up after ROM upgrade, I can get to the today screen with the volume button, but I can't get to the file explorer because the start menu is missing.
When I tap on the lower part of the screen, the upper part responds.
Could this be due to the alignment steps being bypassed?
What order do you have to tap the alignment crosshairs during startup?
This sounds like a different problem
As I mentioned, on my first reflash of the OS after the radio stack upgrade failure, I got the today screen without the start bar at the top (ie it was totally blank and tapping in that area did nothing). Everything else on the today page worked. On subsequent reflashes of the OS, the today page was totally normal, start button, everything in place and working. On those subsequent reflashes, I also got the normal initial screen alignment pages on the first boot after the reflash.
I will also post, that I finally gave up on getting the radio stack to install. I have sent my unit to the guys at PPCTechs. In talking to them, they have 2 other SX-56 units in for upgrades with the same radio stack issue. They feel that they will be able to force the reflash via alternate means using a serial cable. As I mentioned on the other thread where I have been posting, I will post back once I hear if they were successful.
David
in general people should not mess with radiostacks unless they have issues and the radiostack is recommended by the phonecompany one use
Hi,
I have my Polish Orange M650.
At the moment it has:
IPL 1.38.0001
SPL 1.38.0000
GSM 02.04.90
OS 3.13.0.0
One day I tried to put WM6 on it and i get it done using this instructions http://forum.xda-developers.com/showthread.php?t=313486 all other ways described on the forum weren't working, I was getting same errors as described bellow. After that my WM6 was working well, but i decided to put Vanilla on it (using the same solution) and forgot to remove memory card, something went wrong. At the moment my SPV stops at the screen with version numbers. I tried most of the solutions described on the forum but every one finishes with some kind of error:
Flashing with SD card (http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing): Checking SD contents ..... Invalid Certificate
http://forum.xda-developers.com/showthread.php?t=313486 - can't connect to Active Sync so solution is not working
Using Rom Update Utility, depends on version I have this errors:
- it goes immediately to 100% and ERROR [270]: Update error. This image file is corrupted. Please check your Update Utility.
- it goes to 3% and ERROR [270]: Update error. This image file is corrupted. Please check your Update Utility.
in both cases SPV is restarting to screen with versions.
I tried also flashing original SPV Orange Polish ROM, no success. (http://rapidshare.com/files/53869919/wm5_os_1.38.0.0_radio_2.95.90_pl_orange.rar)
I tried some more solutions described on this forum, but it's hard to describe them all, i just don't remember all of them.
It is more than 2 weeks now when I am going through forum and trying all the different methods, my SPV is still not working. I will be very grateful if someone will be able to help me.
Sprawdz Tu http://forum.xda-developers.com/showthread.php?t=311403
bez USPL nie da rady
I tried this several times. My AS won't be green because WM is not starting. I tried to run it from boot loader, it goes immediately to 100% and shows error 270. any other ideas?
Dide you manage to solve this?
Nobady solve this, no right Orange PL ROM, look here: http://pdaclub.pl/forum/index.php?topic=104685.0
- it goes to 3% and ERROR [270]: Update error. This image file is corrupted. Please check your Update Utility.
in both cases SPV is restarting to screen with versions.
just remove microSD and SIM cards before running USPL and it will bypass without any issues.
PLZ help !!
I searched and I tried everything
disabling antivirus, and Windows Firewall , Restarting PC and PPC.
But still giving me the same error.
I update it to Diamond and it's now sticking on boot picture showing diamond with qoute under it " ITs Popa Black Diamond"
and when I press reset soft + Camera button + Power button then shows me Green and Red And Blue screen
I started the ROMUpdateUtility with Rom
after a while shows me this error
UPDATE ERROR 262
Plz Help
This thread should help (it's an Activesync issue).
I didn't know he made Vogue ROMs......
I had a similar problem. I have wanted to update mine ROM. I have downloaded new ROM and Unlocker and used How To Unlock Your Phone And Flash A Custom Rom And Relock Your Vogue (Written by Detroit_Doug). There it is written that the first needed to start RomUpdateUtility.exe, I have made as have been written and then as I did not try I all time had an error 262. When I already used all variants and have helped nothing. Then I have found in a folder with taken Unlocker file Vogue_unlocker.bat. After its start I followed instructions on the screen and all has passed smoothly. Phone has been successfully unblocked and flashed.
I have the official HTC_P3300_WWE_3.13.405.1 installed, it was upgraded from wm5 months ago. Everything works as it should, but when I try to install a cooked rom, the scroll bar gets to 3% then the pda flashes off just like it does seconds before it starts installing.
I then get ERROR [270] : UPDATE ERROR. The image file is corrupted. Please check your update Utility.
Click Exit to quit
I have tried both no-nonsence 4 and 6 with the same problem.
What am I doing wrong? Do I need to install USPL or somthing else???
Same here... After 3% the message ERROR [270] is shown...
Anyone...?
http://forum.xda-developers.com/showpost.php?p=4377664&postcount=7
Hi I have an htc evo and I tried to root it but failed when installing the damage control rom and now my phone just power cycles when I try to boot it up. If I go into bootloader, volume down etc, when I plug it into my pc it says it could not install the driver for Qualcomm msm device and I cannot run the recovery.bat because it just opens for a second then closes. Please help me!!!!!
I GOT the Same issue
I boughtt this phone (HTC EVO) off ebay thinking I can clear DATA and start over-- I've done some researching and it looks like this was a failed FROYO update-- I Tried usring RUU utility to update rom-- and found one that is the same rom as what looks to be on the phone already, because the RUU is telling me something like replace Build 3.26.651.6 with the same thing-- 3.26.651.6-- i will click yes/next-- it will write new info onto the phone-- then it will complete and restart-- then it goes back and power cycles over and over and over again...just on repeat--(i've tried to downgrade roms, but when i do it gives me a error that reads.."Error [140]: Bootloader version error The ROM Update Utility cannot update your Android. Please get the correct ROM Update Utility and try again:---- interestingly enough there is no 4g splash screen when it cycles-- it only goes on the startup image "white HTC 4G EVO with black letters" then will turn off..then vibrate, then repeat again...over and over and over again...
PLEASE help--
I feel as though I've tried everything--
I've also attempted to put "PC36IMG.zip" on SD card with my GF's evo-- then back to mine-- because computer doesnt read my com when its pugged through usb-- i can only connect at "Bootload USB plug"
--ANY help will be greatly appreciated.....
Thanks in advance--