I was updating my new i-mate SP3 (typhoon) to the latest i-mate ROM 2.4.33.11 which completed successfully but now every time I turn on the phone it goes directly to the bootloader tri-color screen. I tried several times to update the ROM again but it does'nt help. It shows the proccess completed successfully but the phone is still stuck in bootloader mode.
In the bootloader screen it shows the following
IPL 1.00
SPL 2.5.0102
I even tried to flash the ROM through an image of Orange4114_ALL_SPL1010091 on a miniSD card but it gives an error message
"Not allowed update!"
Please help me figure out how to get my phone working again.
Same PROBLEM here HELP..!
Exactly the same problem if anybody can help ..please do.
spl
hi
same problem my sp3
SPL
Same problem on spv c500 stuck in bootloader but with 2.05.0130 SPL
sp3i stuck
Hi all,
I have the same problem, but I didn't try the mini-sd boot.
surfturtle, will you kindly send me the way?
Thanks
Hi guys...
I don't have the Typhoon and don't know if this will work for you, but this is at least how we fix this problem on the Hermes:
Enter into bootloader using mtty.exe and run the command "set 14 0" and "task 8". Phone will reboot and start OS.
If it doesn't work, then try the SD flash method mentioned by surfturtle. Keep in mind that if your device is not superCID the image file should match the CID of your phone (must be an original shipped update from your vendor). This method consist on:
1) extract the rom image from the rom upgrade exe (winrar or cabextract can be used for that) and you'll find a .nbf file.
2) Rename it to TYPHIMG.nbf
3) Format your SD card in FAT32
4) Put TYPHIMG.nbf on the root folder of your SD card
5) put sd card on the phone, and enter into bootloader
6) confirm flashing on screen, and wait until the process is finished (do not reset it, will take about 30min).
Check the hermes wiki if you need more information on any of this.
Good luck!
sp3i stuck
thanks pof,
but where would I get mtty.exe and where will I see "set 14 0" & "task 8"
thanks again.
Re: sp3i stuck
@Tall_Man: See the hermes wiki:
http://wiki.xda-developers.com/index.php?pagename=Hermes_BootLoader
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
I-mate ROM
Hi, I did the upgrade through the PC but the device info still shows the old ROM: 2.1.33.13 No error messages and the phone keeps hanging on me.
Is this version of ROM the Arabic one? If not, can someone post or point to where I can download the arabic version? I did not find it on the I-mate website.
Thanks in advance,
I-mate SP3 (?rom 2.1.33.13)
Hi Profs,
there are some problems with a Artemis Update SPL (USPL) v.01. I've found this problem is several topic but there was no solution for it.
#1:
http://forum.xda-developers.com/showpost.php?p=1739577&postcount=413
#2:
http://forum.xda-developers.com/show...44#post1745844
#3
http://forum.xda-developers.com/showpost.php?p=1713596&postcount=1
The problem:
use USPL to get rid of the CID....count goes up to 100% screen shows black with green text, then pops to white. I need to do a soft reset to get it running again.
Then i use ROM Update Utility to update my p3300....and it still keeps hanging on 3%....damn. i get mad...!! Have read almost all here online...no virusscanner, no firewall....I use win XP.
i even tried without memory card and phone card....and nothing seems to work.......
ipl 1.14.0001
spl 1.14.0000
gsm 02.07.90
os 1.14.0.0
Who has any clue...?
With other words:
I've just got back my P3300 from repair, they changed the main board. With the previous main board I was able to upgrade the device and I was using the B&B versions.
But with this new board I'm not able to upgade the SPL. When I try to upgade the device after and start the start_uspl .exe the 10...20... ....100 my device become an interresting "blue screen" status and only the reset help to get out from this status. If I start the RomUpdateUtility.exe after the upgrade I got the error message #270
IPL: 3.13.0001
SPL: 3.13.000
GSM: 02.94.90
ROM version: 3.13.405.1.WWE
ROM date: 8/28/07
ExtROM version: 3.12.405.102
This is not the solution for the problem. I've tried it:
Plug in USB cable. Hold voice recorder button and press reset button. Bootloader will appear (Three color stripes). Then you may flash up ROM. (This works only for RUU installation types, not for PDAmobiz modified installator) Original english HTC P3300 ROM you may download form here: http://wiki.xda-developers.com/index...temis_Upgrades ....
Please help us to solve this problem....
Probably the same problem
This should be the same:
Hello POF,
I was directed to this link by Rudegar because I want to change the french ROM to English ROM.
The relevant data of my PDA is:
The version of the ROM: 1.14.406.1 FRE
Date of ROM: 9/27/06
Radio version: 02.67.90
Protocol version: 4.1.13.28
ROM extension version: 1.14.406.101
I tried exactly the way you described in the USPL_manual and everything went well till I got to a stage where I was asked to click the update button which I did. After then there was a window which showed "updating from current version to version 9.99". I was confused at this point but clicked "continue" and after this stage I got an error message and there was no longer a connection bw my PDA and my computer.
Thanks,
Jonat
Reply With Quote
http://forum.xda-developers.com/showpost.php?p=1784337&postcount=430
Also the same
Problem "lost connection PDA-PC"
Hi,
first I would like to thank you for goooood job to many people here !
Back to my problem. I have HTC Artemis (T-Mobile MDA Compact III), OS WM6 T-Mobile Czech version.
I ran start_uspl.exe on my computer. The part in DOS based screen seems to finish everytime OK, but finally the connection with PC is lost. Therefore when the PDA Phone ROM Update Utility starts cheking version the error "lost connection with PC" appears . PDA stay in "black screen" mode and only hard reset start it again as usual.
Does anybody have the same problem? Any idea, how to solve it ?
Thanks
http://forum.xda-developers.com/showpost.php?p=1773030&postcount=426
When the screen goes white, don't restart. Just start flashing to the new ROM. Worked for me
Unfortunately it not a white screen, it a black one, connenction lost with the PC, and only the reset PDA helps to restart the unit again....
lenocs said:
then pops to white. I need to do a soft reset to get it running again.
Click to expand...
Click to collapse
What im saying is when it pops to white, dont soft reset it, just start the upgrade.
Anthony2oo5 said:
When the screen goes white, don't restart. Just start flashing to the new ROM. Worked for me
Click to expand...
Click to collapse
that what i also do When the screen goes white, don't restart. Just start your RUU
lenocs said:
Unfortunately it not a white screen, it a black one, connenction lost with the PC, and only the reset PDA helps to restart the unit again....
Click to expand...
Click to collapse
Same situation as above. Depending on the Artemis, the screen might go white or black. Just don't freak out and keep on flashing the USPL. It WILL work and then reboot. Then you can flash the actual ROM you want.
Hello from an absolut newbie trying his first upgrade,
And I have just experienced the same problem than lenocs.
I have run start_uspl.exe, but when the screen is suposed to become white or dark, it becomes dark and the artemis is in fact totally off and connection is lost.
Anyway I supossed that it was because the scrren got black and I tried to run the update utility, but I´ve got an error (the terminal is disconnected or similar) and nothing happens.
I have had to soft reset the terminal and fortunatelly it seems that I still have my previous ROM and it seems that it works. But, do you know if there could be some "side effect" because the first step of start_uspl script?
Anyway I would like to move to WM6, so, any suggestion would be really appreciated.
Thank's a lot
When you restart, what is the USPL number?
Ooopppssss!
I didn't pay attention.
As I've said, I'm a newbie, so I was just woried because I thought I had "bricked" my new atemis.
How can I know now the USPL number?
Anyway I tried the star_uspl again (I'm a crazy newbie) and it failed. The artemis went off almost inmediately.
Thank you very much for your help
SpiggyTopes said:
When you restart, what is the USPL number?
Click to expand...
Click to collapse
solved ... at least for me
I think the problem is in SPL version 3.13 (or maybe anyone newer than 1.11).
Try different Artemis USPL - for me worked version from this page:
http://wiki.xda-developers.com/index.php?pagename=Artemis_DumpedRoms
It's very confusional, because file sizes and also dates are the same as in unfunctional version, but this one worked.
Hope it'll help you as it helped to me.
Maybe this can help you
I bought a 8gb card the week before, so I needed to update the rom in order to have my new SDHC working. But whn I was trying to update the rom, through UPSL 1.1, I had an error. This was the first time I had an error because I have modified the room many times before. My error was about a CMD.EXE issue, something like Error code line 26 "can´t spawn cmd.exe" so I was not able to change my rom. What I did was to copy CMD.EXE from Windows/System32 and put in the same folder where I had the start_uspl file, and finally works!
Do not ask me why, but this was the only way I could make works the update process.
Just try.
Rocheau said:
I bought a 8gb card the week before, so I needed to update the rom in order to have my new SDHC working. But whn I was trying to update the rom, through UPSL 1.1, I had an error. This was the first time I had an error because I have modified the room many times before. My error was about a CMD.EXE issue, something like Error code line 26 "can´t spawn cmd.exe" so I was not able to change my rom. What I did was to copy CMD.EXE from Windows/System32 and put in the same folder where I had the start_uspl file, and finally works!
Do not ask me why, but this was the only way I could make works the update process.
Just try.
Click to expand...
Click to collapse
do u have ur card in the phone while updating
you are suppose to remove the card
Problem solved (for me)
Hi,
i had the same problem error 270, 3% and lost connection with Activesync.
IPL: 3.13.0001
SPL: 3.13.000
GSM: 02.94.90
ROM version: 3.13.405.1.WWE
ROM date: 8/28/07
any way to upgrade was wrong ->> error 270
My good way was:
1. Downgrade to WM5 - original shipped ROM 1.12.405.1(link found on Wiki pages)
2. Under WM5 run USPL to unlock CID (now without any errors)
3. Final STEP - Upgrade to new ROM Artemis Touch 3.01 (without any errors by upgrade)
))
Now my Artemis seems to be OK.
I ran USPL with storage card inside the device...
no problem
switch SD card back to 2GB or smaller before USPL
Hi,
for me USPL did not work with my SDHC 8GB card but then I switched back to my previous 2GB SD card and then it works.
Perhaps the SDHC driver blocks USPL in some way.
Cheers,
Markus
i have been trying for 3 months
once i have upgraded my artemis to wm 6.0 everything seemed to be OK for two days... then the screen started to go black when i restart... şi downgraded to 5.0 but nothing changed... when i remove battery for a while, my arte works... when i try to do anything with it, the screen slowly goes black as if it is broken... please DO HELP ME! i am going to go mad... i have a new iphone, ihave i kaiser as well... but i miss my artemis very much...
Hello:
I have the same problem and realized hundereds have too. I have been checking in all forums and no asolution to it
The issue that happens to me is that I used USPL for upgrading to WM6 and worked, but now for the Touchflo it does not. Tried with all USB ports, tried with different computers and no good news.
The USPL msdos screen indicates that there is no connection at all in all percentage levels, then it bocomes dark and the 260 error whne installing the rom.
please help us soon !!!
we are in trouble!!
Same Problem : Screen shut down
Anybody can help us on this point ?
The only way to solve it is to remove the batterie during 30 min., then put it back and pray...
Then, for no reason, the screen shut down, a few minutes or days after
I've upgrade from WM5 to WM6 with the original Rom of HTC, it seems a little more stable but it shut down every 2 days when i'm lucky
Hello, i tried to install wm6 on my qtek 9100, first i have followed this guide: http://forum.xda-developers.com/showthread.php?t=298613 , but the wizard_love rom failed, and then i CID unlocked my phone and that worked fine but then when i tried to install T-Mobile 2.26 rom" from the link: http://rapidshare.com/files/38880130..._ship.exe.html an error message comes up after the instal has
reached 1% i think its "error 326: this NBF file can not be used for your PDA phone, please check your PDA file" and then the instal does not continiues. So i installed button_rom again from the gudie and the install worked fine, but when i restarted my phone i gets stuck in bootladder screen (not the 3 colored screen) and there are IPL/SPL 1.01 but i dont came any longer, i tried to reinstall button rom but it´s the same thing, i get stuck and my phone wont go in to windows...
What shall i do??? pleease help me i have just buy this phone for 400 dollars, so i must make it work again, the best is if i get the orginal swedish rom for my qtek 9100 pleeeease help me please
Sincerly yours// Johan
Edit: almost every rom i try to install, it gets stuck and a error message comes upp: Error 326 ( i think) please check your NBF file or something like that, what is the NBF file? and how do i fix it?
Hello,
I have an unblocked SPV M560 (HTC3300).
Few weeks ago I have installed the B&B rom with WM6 on it. Now I would like to install the adinfinitum rom (http://www.adinfinitum.fr/wm6_gps_m6...d_and_the_ugly) to solve the GPS problem we can have with the M650 but I cannot flash anymore.
Here are some explanations:
After starting "start_uspl.exe" I get the Linux screen then the RUU application starts on my PC. RUU is trying to connect to the device but after few seconds it displays the error "ERROR[260]: Update error".
After this I tried to restart the pda, wait for Activesync connection and try to restart RUU.
This time RUU can connect, I can see the grey screen on the PDA and it starts updating... but after 2% I get a black screen on the PDA and RUU displays the error "ERROR[270] Update error".
I'm now reading this forum since 2 days and saw that other people already had this problem but I did not find any working solution.
Does anyone of you have an idea of what can I do to solve this problem?s
Thanks in advance for your help.
Alain.
REad this...
Remove sim and mem card from phone use clear storage to clean phone memory then again try start_uspl.exe wait to 100% finsh do not disconect phone and run then romupdateutility i hope that this can help mine problem is resolved and i flash spv m650 many times.
Hi, i have similary problem, when i try re-install WM on my xda orbit 3.15.118 i have alert : flashing error check your update utility..when i try install another WM6 i have alert : error 270:update error
battery full charged
anyone help me ;-)
Hi,
I finally managed to do the update. The only difference is that when RUU has started after getting the black screen I clicked on the cancel button.
After this I let the terminal with this black screen for few minutes (about 5 minutes) and starts again the RUU application.
And this time is works... don't ask my why, maybe it takes some time to the terminal to be ready to accept connections. At least now SPL 1.1 is installed and I can upgrade. My GPS is now working
Thanks
Alain
Spv m650 arte100
when i run the start_uspl.exe i have this window after the run
No Device Connected
Would You like to try copy again?
YES NO CANCEL
boy my SPV is in bootloader mode and i can't riun it in different mode
i have IPL 3.15.0001 and SPL 3.15.0000
What i have to do ???
PLEASE HELP ME
Hi guys, I just got an HD2 and I am new to flashing ROMs on it, but I am not really a beginner because my previous phone was an ETEN x500 and I flashed a ton of ROMs successfully on that phone. However on this one I am running into a problem.
I successfully installed the bootloader HSPL without any problems. Then, I wanted to do task29 before I installed a new ROM. I followed all the instructions fine, I click NEXT until the device enters bootloader mode, then I see a black loading screen on my HD2 with the HTC logo on it. The problem is the loading bar stays at 0% no matter what I do, it won't install the ROM. After about 5 minutes it gives me the following error message:
www . screensnapr . com/u/icpiuj.png
When I click on the "View Document" button, I get the following message:
www . screensnapr . com/u/dhiria.png
(it won't let me post offsite links to images because I only have a few posts, but I mean no harm with them, I'm just trying to explain my problem. )
I have tried uninstalling ActiveSync and reinstalling, changing USB slots on my PC, I removed the microSD card and the SIM card, I tried entering bootloader mode manually and then running task29, but it all fails with the same results.
The phone still works fine, I disconnect the USB cable from the phone after the flashing failed, and remove the battery for 3 seconds and then the phone starts fine with the original ROM. So there is nothing wrong with it.
What could be the problem please?
Thanks for your help.
Hi everyone, sorry for doubleposting but I have found my solution. I had an incorrect HSPL version installed somehow, although I did follow the tutorial here: forum.xda-developers. com/showthread.php?t=653614
I downloaded the HSPL version linked on that thread and it didn't work.
Then I downloaded the one I found here that said specifically for TMobile HD2: www .mobileunderground. info/showthread.php?t=7997&highlight=HSPL+1024%20..
and this one worked great. I have my custom ROM running now.
HSPL3 is the latest and can be found here somewhere. You must not have had SPL 2.10. Glad you got it to work!