Database Users

a white screen on charmer

after the charmer rebooted, there is a white screeen on it. i did hard reset but i did not help me. i got the battery out too but no no.
please help me.

Try entering bootloader mode and flashing the rom once more.

bootloader
yes i did it but couldnt be successful
i doesnt
Bootloader mode:
[Record] or + [Power] + [Soft reset]
[camera]
screen is always white and is not connected with activesynce.
thanks

call to your phone see if unit is working

when i call the charmer i hear the mail box .
it is not connected to pc too.
i dont know why i cannot be succees bootloader

now i can bootloader mode,
i did it but got this error while i upgrade my rom to newest rom 3.3...
it means in english : please check your NBF data, this NBF data cannot be used for your PDA Phone.

and if i want to install the rom version of compactII_AKU2.0_05-2006 i get such as error error 296 :this NBF file cannot be used for your PDA phone.please get newer NBF file.
what does it mean boys...
please help....

You probably have the 3.xx bootloader, find the german AKU 3.3 and flash it.

yes i found it
if i want to install the newest rom also ger.3.3 i get such as error what there write on jpeg at attachment mean in english
"please check your NBF data, this NBF data cannot be used for your PDA Phone".

Try some prophet rom with noid RUU.

where i can get it from.
please give the link.
thanks.

sorry, I'm sick and tired of providing everything for everyone. Go to prophet section and find a wm5 rom.

<salute vlodeck!>

danke an alle
thanks friends espacially vlodeck
my problem is solved.
use this link to solve it
http://forum.xda-developers.com/showthread.php?t=301323&page=2

Is my qtek 9100 crashed?

Hi, i tried to install touchflo on my pda phone but the instalation failed. And now everytime i try to install a custom rom or anouther rom for example: button's 1.05 ROM. The instalation totaly completes but when my phone restarts it´s gets stuck at the boot screen with the picture on a beer and the ipl/spl 1.01 shows up and there its stuck, i dont come in to windows. i have followed these guides: http://forum.xda-developers.com/showthread.php?t=298613 and http://forum.xda-developers.com/showthread.php?t=285435
But with some roms the instalation stops at 98% and a error message cames up and it says: "error 326: this NBF file can not be used for your PDA phone, please check your NBF file"
And when i try to hard reset it says: "format FAT partition and format is failed"
pleeease help me what scould i do to get my phone back to normal again?
sincerly yours// Johan

When its on the beer bootscreen, give it time. The button rom (i find) is real slow but works for what we use it for

Is your phone CID unlocked ? try to get the phone in bootloaders mode (multicolor Screen) and either flash the button's rom 1.05 or official stock rom of your carrier to recover back to default working status and download the WST tool and verify the SIM/CID lock/unlock status of the phone.If you have inserted any sdcard or mini sd card remove it before flashing.
Cheers!

skezza said:
When its on the beer bootscreen, give it time. The button rom (i find) is real slow but works for what we use it for
Click to expand...
Click to collapse
no, i have waited for 10 hours but its still stuck

zabardast_1 said:
Is your phone CID unlocked ? try to get the phone in bootloaders mode (multicolor Screen) and either flash the button's rom 1.05 or official stock rom of your carrier to recover back to default working status and download the WST tool and verify the SIM/CID lock/unlock status of the phone.If you have inserted any sdcard or mini sd card remove it before flashing.
Cheers!
Click to expand...
Click to collapse
yes i have CID unlocked it one time. but when i get the phone in the 3 colored screen but when i flash de buttons rom 1.05 and complete the instalation i get stuck in the beer screen there i can see ipl/spl 1.01 i dont came in to windows and i must come in to windows to rerun the CID unlocking or can i do that by the 3 colored screen?
pleease help me
cheers!

Got the same Problem, any ideas?
Hi Ashtrays,
could you solve your problem?
I got the same one: Flashed my MDA with a new ROM, and after a complete installation it gets stuck at the splash screen.
I flashed back to Buttons 1.05 ROM but still got the same problem: A nice beer glas and the info about IPL/SPL 1.01 and nothing more happens.
So have you solved your problem? Maybe you can help me out...
thanks
Henning

Do a Soft reset or Hard Reset,it shud work,otherwise reflash the Rom.

Pls get a newer update utillity error-02 orbit

Hi,
hopefully somebody can help.. have an 02 Orbit currenty will only go into bootloader mode. IPL 1.25.0001 SPL 1.11.0000 and has RUU in top right corner. Most times when plug USB into sytem USB will come up bottom left corner
Tried flashing various Roms from standard 02 - lastest anja_ diamondsty v01 cooked. it starts the download but everytime an error notice comes up... The update utility cannot be used for your PDA phone. Please get a newer update utillity ... any ideas?

anybody have an answer or possible cause?

Try flashing a different ROM or try re-downloading the one you want to use. THe IPL and SPL seem fine on your phone.

RAF_SHC said:
Try flashing a different ROM or try re-downloading the one you want to use. THe IPL and SPL seem fine on your phone.
Click to expand...
Click to collapse
That is the challenge ... the error message comes up when trying to install any ROM

error 200lease get a newer update utility
hey,
did you solve the problem?
cause i got the same...my artemis is connected to my pc with Bootloader/USB-Connection,started the Update Utility(as I did it many,many times before^^without any problem) and after it verified the Information on my phone,
it brought this error 200lease get a newer update utility...
Why does it do that?? A few hours before it worked great and now? Every ROM,Artemis Touch 4.02,B&B4.3,BB5,Artemis Diamond,even the USPL,has now this error!
By this moment, it looks like I'm unable to put any ROM on my Artemis...
Please,can you help me to fix this problem?

ok, i fixed it
Got the original o2 rom on the pc from my friend, with this connection(o2rom,other PC) it worked...for now...because after starting my artemis i wanted to get my old Artemis Touch 4.02, so i run USPL but after 100 % it brought the error 270...

XDA ORBIT not able to flash ;(

Hy..
belive me.. i tried nearly everything... and ive been through all of these posts... but i dint find anything helping me out with my problem...
ok, i try to explain in a short way!
I want to upgrade my "old" xda orbit (rom: 3.4.207.2GER, Rom Date: 18.04.07) wit a new rom ( something like "Artemis_Touch_4.02_Full_with_4_sided_cube")
BUT IT DOES NOT WORK!
Yesterday i updated my "new" DIAMOND to a new rom (Bepe 0.94)... so i basicaly know what to do..
But my ORBIT doesnt like to be upgraded..
USPL: doesnt work
RUU: doesnt work
Artemis_Touch_4.02_Full_with_4_sided_cube: doesnt work
downgrade to wm5: doesnt work (dindt find the correct one, i guess...)
now i am out of any more idears... ive got a lot of error messages... such as 260, 270 corrupt files, and many more...
wonder why my orbit is still running after all these unfinished and unsucessfull "updates" but still running with original german O2 WM6 system.
Does anybody can give me a hind what do do, how to update or where to look?
Thanks a lot...
Using Artemis USPL: in the DOS window always the message "program cannot be found".. running aprox up to 50% and stops, than closing the DOS windo
the orbit stays, after a short action showing the Linux guy, with a "white/black" display..
than using the RUU: still connected via usb to my pc.. still black display..green LED on top of the device on..checking the rom.. showing mine correct (3.4.207.2) to 9.99
clicking "next": starting updating... pda display gets threecolored.. than gray.. showing 99% and than 100% after just a few seconds..
Prog stops.. telling me that the file is corrupt (Error 270).. my device reboots and starts with the O2rom
I downloaded the Artemis USPL several times from several locations.. always the same message...
Hard to explain.. but i hope you got my point?!
Btw.. thats just one of the ways i tried.. and just one of my errormessages..
Thanks

Did you tried to remove your SD card before you flash?
Cheers

I Got It I Got It
Thanks "Zecanilis" for your answer.. but that was not my problem.... i took out the sd card as well as the sim card.. as i said.. i tried nearly everything!
But this morning ( i spent the whole night in front of my computer ) i foud the mistake.... an easy one!!
The "Artemis_USPL" file, you can find in all of these threads, is not working with my devices (pc and/or ppc)!?! i dont know why.. but it doesnt.
As i told you i always got messages in the DOS window "program cannot be found", "program cannot be used"... and the intallation skipped all files and stopped always around 50%.
but at 3 in the morning i found a USPL file in the net, with a different name, and it worked with the first try!!
The File is named "arte_uspl".
Just worked fine and smooth 10..20..30....... finisehd.
I am able now to install any rom I like!
Btw... i swithed to Mossis V2.2Ger - a very nice one i think.
But maybe i'll try some more...... because i am able to!
Take care and a lot of fun with your devices!
Bobo

I have the same problem
Where can i find/download the "arte_uspl"?
Thanks for your help.

well...good question
i didnt write down the link.... i dint save the link... sorry!
what i did was to save the file on my computer!
i tried to uplad it to this post... but it didnt work?! sure i am to stupid to do it right!?
so plase help me to post it here, and i will do so!
or gimme a mailadress to send it to!
sorry for beeing so stupid!
greetings

orbit do not boot, do not flash
Hello,
i am searching for a solution of my problem:
i updated my orbit with the new mossis ROM and everything was well, and i used my orbit after this update!
Yesterday i Reset my device and after this the orbit dosen't start again!
After showing the bootsplash the device hangs
So i try to flash the device again:
first i try this:
- start the bootloader manually (voice button + reset)
==> shows: IPL 3.04.0001
SPL 1.11.0000
- starting the ROM Update Utillity
==> the screen of my orbit is grey and shows the update bar (0%)
==> RUU shows the following mesage: ERROR[300]: INVALID UPDATE TOOL
(i used the original german o2 update file)
second try:
update with the SD-card:
- SD-card (512MB) formated with FAT32
- copy the image file xxxx.nbh to the SD-card and rename it to ARTEIMG.nbh
- start the bootloader manually (voice button + reset)
==> screen: Checking SD contens
==> Update SD Image?
- bushing the volume down button
==> screen is red green blue and shows IPL 3.04.0001 and SPL 1.11.0000
Update flash do not start!!!
if i try this sd-card based update with the RUU_uspl_signed.nbh file, the device bootloader start and update the ROM
have anyone an idea???

ohs said:
Hello,
i am searching for a solution of my problem:
i updated my orbit with the new mossis ROM and everything was well, and i used my orbit after this update!
Yesterday i Reset my device and after this the orbit dosen't start again!
After showing the bootsplash the device hangs
So i try to flash the device again:
first i try this:
- start the bootloader manually (voice button + reset)
==> shows: IPL 3.04.0001
SPL 1.11.0000
- starting the ROM Update Utillity
==> the screen of my orbit is grey and shows the update bar (0%)
==> RUU shows the following mesage: ERROR[300]: INVALID UPDATE TOOL
(i used the original german o2 update file)
second try:
update with the SD-card:
- SD-card (512MB) formated with FAT32
- copy the image file xxxx.nbh to the SD-card and rename it to ARTEIMG.nbh
- start the bootloader manually (voice button + reset)
==> screen: Checking SD contens
==> Update SD Image?
- bushing the volume down button
==> screen is red green blue and shows IPL 3.04.0001 and SPL 1.11.0000
Update flash do not start!!!
if i try this sd-card based update with the RUU_uspl_signed.nbh file, the device bootloader start and update the ROM
have anyone an idea???
Click to expand...
Click to collapse
Dear ohs,
There are many ppl, who have this Error 300 issue, but there is no help/solution available anywhere. Maybe the best option is to send your device to HTC, I guess they'll replace your motherboard, if in warranty you'll be lucky!!! unless they find out if you have messed up the device

xda orbit
same problem here,i tried eveything,my xda orbit wont flash it starts to instal the new rom but when it reaches 3% it resets himself ...any sugestion guys ? i tried upls,hard-spl etc arthemis rom everything . help please

Guys, I would suggest, if your device is under warranty, do send it to HTC Service center rather than breaking your head with it. Even I have been through such problems but ultimately I sent it to the service center and expecting my device in a couple of days with a motherboard changed.
If your warranty is not valid anymore then you are in trouble.
Good Luck

Xda Orbit
dose anyone knows the right stepts to flash this Xda Orbit German rom with a wwe rom ? please post it so we can try,i have this xda for 1 year now and iam still using the german rom on it,i what to start to use it but what can i do ? learn german ? somebody help ! i tried to flash it with RUU_Artemis_O2_UK_3.4.206.2_4.1.13.50_03.06.90_Ship all gose well untill 3 % from update the xda resets and gose back to his rom,please help me out ! i`ll mae a donation for this cause ! Thanks

arte_uspl
bob75 i found the rar arhive for your arte_uspl the link is : http://rapidshare.com/files/36943423/arte_uspl.rar

MDA stops on Bootloader screen

Hey people,
I have got on nice MDA with ipl and spl 2.21.0001
me problem is i have no idea wath did happend to it.
the MDA starts up shows T-Mobile ... an go to the Bootloaderscreen (red IPL2.21.0001, green spl 2.2.0001, blue, with)
so i have tried to flash it now with WM5 from T-Mobil image ver 2.26.10.105 (from this nice Board here
The flash tool shows no image information of my MDA but the posibility i there to push the update button. If i do that the update tool trys to flash a few seconds and stops with error code 294 (invalid vender id). on the MDA is noch change (still bootloaderscreen)
some one of you has an idea wath could be happend to this device ?
or an idea wath can i doo ?

Yes!!!
Your problem... is NOT READ Enough!
So please read how to make a hardSPL cause your wizard is G4....
if you do it well you can upgrade whatever you want but for this time... you need to exit bootloader screen so... perform sofresets! or hardreset!
Keep reading for more chances...

You don't need to apply HardSPL or SoftSPL to flash an official stock rom.
Which language or version was working primarily on the phone before you flashed t-mobile 2.26 ?
Secondly download 'RUU_NoId' or 'RUU_MUN' and replace it with the RUU in the rom and Run the replaced RUU,hope it'll work.

Hi,
and thanks for the answers.
i do not know wath was befor on it. i have get it with the information that there was an klabel inside for the keybord not in the slot .... and after "reparing" - the mda do not boot.
up to now i have update it with orginal firmware and it runs again ... so peraps someone has talk **** to me ?! - now i think it was a bad flash
p.s. the vendor id problem was my mistake, was the wrong update