Related
I just recently bought this phone off someone dont know what they did with it. phone has good imei. But when i make a call the phone seem to freeze or when i get incoming calling the phone freeze. Also the wifi wont let me toggle on. Cant seem to figure out what the problem is. If someone got a solution please do share.
1. Take a look what android firmware is using (Settings - General - About phone)
2. Go to DOWNLOAD MODE (Power off ur phone + Volume down. Volume up then. - Take a look how is the KNOX)
3. Install Kies (if ur phone use android 4.2.2) or Kies 3 (android 4.3 or superior) and take a look if all is ok ( Important see what CSC u use). Only making a factory reset solve the problems sometimes(Settings > Accounts > Back Up and Reset > Factory Data Reset > Reset Device > Delete All/Erase Everything). If this dont solve ur problems, follow the next step
4. Your seller installed one custom rom maybe. If all is ok in the step 3, you can update ur phone by there officially. If no, you will have to use ODIN and flash new stock rom.
Joku1981 said:
1. Take a look what android firmware is using (Settings - General - About phone)
2. Go to DOWNLOAD MODE (Power off ur phone + Volume down. Volume up then. - Take a look how is the KNOX)
3. Install Kies (if ur phone use android 4.2.2) or Kies 3 (android 4.3 or superior) and take a look if all is ok ( Important see what CSC u use). Only making a factory reset solve the problems sometimes(Settings > Accounts > Back Up and Reset > Factory Data Reset > Reset Device > Delete All/Erase Everything). If this dont solve ur problems, follow the next step
4. Your seller installed one custom rom maybe. If all is ok in the step 3, you can update ur phone by there officially. If no, you will have to use ODIN and flash new stock rom.
Click to expand...
Click to collapse
current binary: custom
system status:custom
Knox kernel lock 0x0
know warranty void 0x1
I tried kies 3 but doesn't recognize my phone in emergency firmware recovery. I tried flash stock rom but keep fialing!!!. I also found out the sound wasnt working either. I looked around in forum and there a post with the modem issue i tried to install that modem firmware but doesnt seem to work i think becuase i dont have cmw or twrp installed. but I cant get those on the phone without wifi.. so shine a light on me!!!! is there another way to factory reboot everything like all the hardware and software. or can u provide me detail instruction on how to use odin to reset to factory rom.
My friend going through the same thing but the calls goes thru you just can't hear what the other person is saying. Nor can the person hear me.
khd143 said:
current binary: custom
system status:custom
Knox kernel lock 0x0
know warranty void 0x1
I tried kies 3 but doesn't recognize my phone in emergency firmware recovery. I tried flash stock rom but keep fialing!!!. I also found out the sound wasnt working either. I looked around in forum and there a post with the modem issue i tried to install that modem firmware but doesnt seem to work i think becuase i dont have cmw or twrp installed. but I cant get those on the phone without wifi.. so shine a light on me!!!! is there another way to factory reboot everything like all the hardware and software. or can u provide me detail instruction on how to use odin to reset to factory rom.
Click to expand...
Click to collapse
Same issue Here!
khd143 said:
I just recently bought this phone off someone dont know what they did with it. phone has good imei. But when i make a call the phone seem to freeze or when i get incoming calling the phone freeze. Also the wifi wont let me toggle on. Cant seem to figure out what the problem is. If someone got a solution please do share.
Click to expand...
Click to collapse
Get the same problem here! I've been try many methods to fix it, not good news so far.
Since update to MK2 JellyBean4.3 via Kies! No sound at all, no wifi, freeze when make or receive calls (It's really annoying)
If you find something cool please let me know.... I'll keep trying here.
My device t-mobile SGH-M919 Stock MDL JellyBean4.2.2
Good Lucky
Hello Experts,
===========================================================================================================
Update - 08/Jan/2015
I tear off my set & found several things
1. My back cover, settings > Software info & booklets shows it D802, while internal plastic is labeled as D800 & Motherboard is D801 T-Mobile. Look like some company is selling T-Mobile as D802.
I read it on this forum that if flash D802 rom on T-Mobile D801, then need to reload Kernels of D801 too after flashing D802 rom. I tried flashing D801 kernel in recovery mod but it gives error "E invalid certificates" or something like this, I also tried flashing D801 stock rom, but LG Flash Tools 2014 gives error at 2% (Phone disconnection & sometime "Connection to server failed"), however, LG Flash Tools flash D802 without any issue.
Now, can someone tell me how to flash D801 kernels after flashing D802 rom? Or how can I flash stock D801 rom?
===========================================================================================================
I am facing quite odd problems. please help me.
I have LG G2 D802. My software version was d80220b while when I attached my mobile with pc, pc suite notify me that d80220c is available. I upgraded. But after upgrading, touch is totally out of work. Say like below, I tap "7" & it goes to 2, 3 etc. I select say first option, it selects 4th option.
Also, one more thing, my mobile is 32gb variant, while now it's showing only 10.7gb.
Three Problems total
1. Touch totally disturbed
2. Storage reduced from 32gb to 10.75gb
3. Service Disabled (No sim is working :'(
I think it's due to some rom issue, can you please guide me or send me link for the correct ROM for my mobile?
Error Video
https://www.dropbox.com/s/xwv5e8px6a1fod5/1234.mp4?dl=0
http://i.imgur.com/jfVIGBr.jpg
Waiting anxiously
Thanks
EDIT: SOLUTION
http://forum.xda-developers.com/showpost.php?p=58536078&postcount=75
Anyone else got this problem? Please help experts
Factory reset or flash a kdz
HI Kernol,
I have done it like 5 times, I flash stock rom & hard factory reset but still same.
There was not a single touch issue in the last 2-3 weeks, but it immediately happened on OTA upgrade & on start/configuration screen
Any help please
Factory reset
Factory reset or flash a kdz
Eslam Hanafy said:
Factory reset or flash a kdz
Click to expand...
Click to collapse
I did factory reset as soon as I find this problem after OTA done but didn't work.
Then I flashed kdz 5 times but still same issue
I downloaded 32GB rom from here
storagecow. eu /index.php?dir=Xda%2FLG+G2%2FStock%2F
storagecow. eu /Xda/LG%20G2/Stock/Europe%20OPEN%20D80220B_00.kdz
Custom Rom
mudassar788 said:
I did factory reset as soon as I find this problem after OTA done but didn't work.
Then I flashed kdz 5 times but still same issue
I downloaded 32GB rom from here
storagecow. eu /index.php?dir=Xda%2FLG+G2%2FStock%2F
storagecow. eu /Xda/LG%20G2/Stock/Europe%20OPEN%20D80220B_00.kdz
Click to expand...
Click to collapse
try install a custom rom
may problem ur stock g2 version or something in kernel or baseband or touch drivers
HI Elsam,
I tried many custom roms, but they are in .zip instead of kdz file
Can you please let me know how can I reload them? I am using LG Flash Tool 2014 which supports kdz only. I can stuck at configuration windows just after LG Logo. So, cannot access anything in mobile like Developer tools etc
try to get back
mudassar788 said:
HI Elsam,
I tried many custom roms, but they are in .zip instead of kdz file
Can you please let me know how can I reload them? I am using LG Flash Tool 2014 which supports kdz only. I can stuck at configuration windows just after LG Logo. So, cannot access anything in mobile like Developer tools etc
Click to expand...
Click to collapse
u can't reload this at this moment
only way to fix this its only by kdz
but whats rom version u have before installing update
& u tried to flash kdz version u have in ur phone before ?
Hi Eslam,
Thank you for your help, can you please me your Skype ID
My phone had d80220b how LG PC Suite find an update d80220c & did this on my mobile.
Now, I have tried both d80220b & d80220c downloaded from links posted in last post but I am still having same problem :'(
Here is the video of problem
(Avoid spaces)
https :// www . dropbox. com /s/xwv5e8px6a1fod5/1234.mp4?dl=0
Can someone confirm me whether this is hardware issue or not?
I am grtting this touch problem at custom recovery screens too.
Here is the screenshot.
http: //i.imgur .com/jfVIGBr.jpg
I am also facing "Serrvice Disabled" none of the sim card is working also my phone was 32gb version however it's just showing 10.75gb available space
Waiting for some response
Regards
Try to update the touch drivers, just dial 3845#*802# go to settings and then update touch firmware
Krenol said:
Try to update the touch drivers, just dial 3845#*802# go to settings and then update touch firmware
Click to expand...
Click to collapse
Trying to dial it but touch is not working properly
Do you have a Bluetooth mouse? Or do you have a chance to connect via lg on screen phone?
Krenol said:
Do you have a Bluetooth mouse? Or do you have a chance to connect via lg on screen phone?
Click to expand...
Click to collapse
Trying to connect to phone on screen via wifi & cable connection, but lg to phone doesn't detect any phone
I am facing "Service Disabled" issue too, no sim working.
Anyone please
Mhm did you turn it on in settings?
Krenol: what is mhm? I have no idea
How to turn it on?
mudassar788 said:
Krenol: what is mhm? I have no idea
How to turn it on?
Click to expand...
Click to collapse
Nothing was loud thinking but cant help you here anymore sorry told you everything i know
Hello i have a galaxy s5 that i rooted and installed the alliance rom using philz Touch rom manager.
It has been working fine for a few months. but now when i try to go to recovery i get the yellow triangle because of the reactivation lock ? ( i dont remember ticking it ) so i go to settings and try to untick it and get and error (unfortunately settings has stopped ) ? After having a read i found i just needed to setup my samsung account to fix this. but the problem is i cannot add a samsung account ( its not in the list to choose ?). So thought ok ill do a Factory data reset but after i enter my password i get the same error ( unfortunately settings has stopped ) ? So now i am locked in to only using this rom and i cannot back it up or change it . Can some please offer advice if they have maybe had a similar problem and been able to fix it. I have tried using odin to install open recovery but i get a Auth error with i assume is related to the reactivation lock. I also tried kingo root and unrooted the phone ( oops) and now cant root it again. I have tried safemode, i have reset app preferences but nothing seems to fix it . The phone is working but when i check its speed via Antutu its not working as fast as it should.
please help ( Thankyou in advance)
So i just thought i would share what i have now done. I downloaded and flashed the latest Samsung rom using Odin. So now its running the stock rom and my philz touch is gone ( as expected ) and i can now use the samsung account, so now when I try to untick " reactivation lock " i enter the password or use my finger print, it accepts it but doesnt untick the box. so its still on and i cannot reroot the phone, but after reading i thnk the solution is to go back to 4.4.2 and then untick it ? so i am downloading the rom and give it a go.
Yup, Flash KitKat, log into all accounts, uncheck reactivation lock
Can't downgrade from 5.0 to 4.4.2
Hi Guys,
I tried to downgrade from 5.0 to 4.4.2 but it does not work.
Is it because I have already triggered know 0x1 ?
Thanks
Jan
Hello everyone, i rooted my huawei p9 lite VNS-L21 B360 firmware today.
After finishing the root i had a problem where my password was incorrect all the time, so i looked for a solution, somebody on how-to-geek forums said that i had to delete these files
-gatekeeper.password.key
-gatekeeper.pattern.key
-locksettings.db
-Locksettings.db-shm
-locksettings.db-wal
After that everything worked and i went to reset my password and after choosing a password in the settings and pressing OK the promt came up saying that settings has crashes and i couldn't use the password
P.s cant access developer options aswell, same thing happens.
Please help asap
Anyone please?
Could anyone please help me.... ;(
i factory reset my device and now i dont have a keyboard nor the other apps that had to be installed with update_data_full
im seriously stuck, cant install apps do to settings crashing and cant enable apk installation from unknown sources
adb doesnt work because my PC does not recognise the android device after root etc .etc
is there a way i can install a keyboard APK using revolution recovery or something? pleaseeee help
theAuxify said:
Could anyone please help me.... ;(
i factory reset my device and now i dont have a keyboard nor the other apps that had to be installed with update_data_full
im seriously stuck, cant install apps do to settings crashing and cant enable apk installation from unknown sources
adb doesnt work because my PC does not recognise the android device after root etc .etc
is there a way i can install a keyboard APK using revolution recovery or something? pleaseeee help
Click to expand...
Click to collapse
I had the same problem,you flashes the wrong version.You have to flash c432 oem info in twrp and rollback to marshmallow via three button method.Alternatevely,what I did was send my google account ( email and password) from another phone,then just copy it,install google keyboard and use it normally
thank you very much!
ill try the methods you suggested, cheers.
please help
hii guys i did the same mistake today, i am having the same problem as you are having i cannot use settings app i dont have a keyboard please help me how to fix this.... i tried flashing but it shows error i tried installing stock recovery and then flash it but i cant do anything..... please help me
Disclaimer : I am not responsible for bricked devices, dead phones, or you getting fired because the alarm app failed. Please do some research if you have any concerns about doing this to your device .
I am happy to present you the best EUI EUI 6.0.617Т experience for the Le Max 3 ( X850 ) .
About firmware :
-> The ROM install the EUI6_Firmware&Modem_x10. YOU DON'T NEED TO FLASH ANOTHER FIRMWARE
-Updated GoogleCamera (shoots in portrait mode).
-Guilt GooglFoto (for the filming of GoogleCamera in portrait mode in the settings of the developer of the camera to check the box "Use Google Photo").
-Changed the launcher for the native from LeEco.
-Changed the keyboard.
-work of GPS is improved
- It is optimized as much as possible on power consumption and operating speed.
- Removed useless apps
- Added Google camera (5.1.014_7) with working blur. The native EUI camera is removed, because with the Camera2api module it does not work. ( thanks to @ant074 )
- Optimized the work of Wi-Fi.
- build.prop changes
- Added the activation of AOT, the first setup will be longer, but after that the firmware becomes even faster.
- Installed Vulkan API for Android 7.1.1.( thanks to @ant074 )
- Patched sound system files
- Quiet sound in headphones fixed
- A bit of built-in applications.
- Added equalizers ViPER FX and Dolby Atmos.
( Latest fix : Now fingerprint scanner and video in the camera is working. ( thanks to @ant074 ))
If you encount an bug , please tell me the details in this thread .
6_7.1.2_final_clear
Video
How to install :
1. You need to have the bootloader unlocked , and the TWRP installed .
**After unlocking the bootloader , you can get an green notification led and the phone not turning on , when you try to boot your phone .
[ THE SOLUTION IS : To boot into TWRP ( volume up and power button ) and from TWRP , tap on Reboot --> System , this will boot the phone normally , currently we can do nothing to solve this :crying: ]
Note : If you come from another ROM , you will need to do an wipe on system , data , cache .
Also please take an backup , if you will want to restore back , or something goes wrong
1. Download the ROM
2. Download and copy the ROM , inside your internal memory
3.With all wipe-Dalvik / ART Cache-System-Cache-Data.
4. Flash the ROM
5. After that you can root
***Suggest to root with Magisk
Link to download firmware https://drive.google.com/file/d/1XlYLgCT5ZI0aw5_TBjQamEVnlSqWapHP/view
Great work aserge and @ant074 .
Update the post
diamantik said:
Great work aserge and @ant074 .
Update the post
Click to expand...
Click to collapse
Updated, thanks for the help..
aserge , maybe make another version of this ROM , there change the default keyboard to gboard , or back to AOSP , restore the default launcher , leave the stock camera ( in case we want to use the original camera , with the camera2api module disabled ) , stock video player , and remove all the added apps
i think that will be welcome :angel:
Thank you very much Aserge for continuing the development. Thank you very much
diamantik said:
aserge , maybe make another version of this ROM , there change the default keyboard to gboard , or back to AOSP , restore the default launcher , leave the stock camera ( in case we want to use the original camera , with the camera2api module disabled ) , stock video player , and remove all the added apps
i think that will be welcome :angel:
Click to expand...
Click to collapse
With the modem 6.0, the standard camera does not work. It does not make sense to return it.
ant074 said:
With the modem 6.0, the standard camera does not work. It does not make sense to return it.
Click to expand...
Click to collapse
I have taught that the stock camera was working now :crying:
Also are you interested to start working on an better 6.0.1 AOSP
diamantik said:
I have taught that the stock camera was working now :crying:
Also are you interested to start working on an better 6.0.1 AOSP
Click to expand...
Click to collapse
Not interested. This is a step backwards. Soon, a google camera with portrait mode will be introduced. The standard camera is an outsider.
Hello, Can you show me more cleary step by step to install this ROM ? Does this rom install itself the same as Russian? Can I use this manual from page 35
https://forum.xda-developers.com/le-max-2/how-to/leeco-le-max-3-x850-t3584515/page35
Ps.
At my another phone I install Rusian ROM in MAY 2018
Regards
TOM
EDIT:
Now I have a unlock boot loader , but I don't know how I can flash the .zip file or part of extract .
Can I flash it by one command ?
fantastic.. if possible add "multilangiuage".. option/language & imput/ add language
For me... how I CAN get restore a oryginal boot loader ?
Beacuse when I try power on, I will see blinkling green led lighgt. It is no good for me. Simple power ON by TWRP (RESTART system) is hopeless . This ROM in my opinion is very slow. EVERYDAY (from 04.2018) I use RUSIAN ROM by BAIKAL ? IS VERY STABLE AND efficient.
[email protected] said:
For me... how I CAN get restore a oryginal boot loader ?
Beacuse when I try power on, I will see blinkling green led lighgt. It is no good for me. Simple power ON by TWRP (RESTART system) is hopeless . This ROM in my opinion is very slow. EVERYDAY (from 04.2018) I use RUSIAN ROM by BAIKAL ? IS VERY STABLE AND efficient.
Click to expand...
Click to collapse
There are only two option for Roms : 1. Is this nougat from aserge ( aka Hero of Labs)
2. An EUI 5.9.021S either by moto , or an more better one , by me , link to that : https://forum.xda-developers.com/le-max-2/how-to/le-max-3-eui-5-9-21s-diamantik-t3834291
Both requiere an unlocked bootloader and an TWRP installed , and there is no fix for blinking green led when powering on .
I mention that in my ROM post
Diamantik Can I back to oryginal Bootloader without blinking power LED ? It is possibile uninstall TWRP ?
Now I want install Rusian ROM By Bajkał ? Sorry but this lock when i try simply switch power on is very annoying.
[email protected] said:
Diamantik Can I back to oryginal Bootloader without blinking power LED ? It is possibile uninstall TWRP ?
Now I want install Rusian ROM By Bajkał ? Sorry but this lock when i try simply switch power on is very annoying.
Click to expand...
Click to collapse
Well i have not tried yet this , i have not found this very annoying .
I think you can fastboot the ROM , this way the TWRP will be replaced with the stock recovery , but i don't know if this will lock back the bootloader , i suggest you to post in our thread " LeEco Le Max 3, X850 by Generaljan " this question , there will be seen by more , maybe there will be someone who tried to lock back the bootloader , but keep in mind , before doing something ,do some research if don't want an brick , and an minus 30 $ from your pocket for QFIL repair
[email protected] said:
Now I have a unlock boot loader , but I don't know how I can flash the .zip file or part of extract .
Can I flash it by one command ?
Click to expand...
Click to collapse
Installed TWRP?
diamantik said:
Well i have not tried yet this , i have not found this very annoying .
I think you can fastboot the ROM , this way the TWRP will be replaced with the stock recovery , but i don't know if this will lock back the bootloader , i suggest you to post in our thread " LeEco Le Max 3, X850 by Generaljan " this question , there will be seen by more , maybe there will be someone who tried to lock back the bootloader , but keep in mind , before doing something ,do some research if don't want an brick , and an minus 30 $ from your pocket for QFIL repair
Click to expand...
Click to collapse
Many thanks for Your information.
Correct me if I am wrong.
To turn on the phone with TWRP installed and the green LED blinking, I need to:
1 hold the vol up + power button
2. Go to TWRP mode
3. select REBOT
4. select the system
Only then will the phone start the system
do you know a simple method to start the phone?
I will check your ROM tonight
When unlocking the bootloader, I encountered a problem with Critical UNLOCK bootloader = FALSE
Now I know why this problem occurs for some users
I will write this also in the main thread in the evening. Add this information to your step-by-step instructions, your manual helped me a lot
Some links in your guide do not lead to files you write about - it's worth checking.
[email protected] said:
Many thanks for Your information.
Correct me if I am wrong.
To turn on the phone with TWRP installed and the green LED blinking, I need to:
1 hold the vol up + power button
2. Go to TWRP mode
3. select REBOT
4. select the system
Only then will the phone start the system
do you know a simple method to start the phone?
I will check your ROM tonight
When unlocking the bootloader, I encountered a problem with Critical UNLOCK bootloader = FALSE
Now I know why this problem occurs for some users
I will write this also in the main thread in the evening. Add this information to your step-by-step instructions, your manual helped me a lot
Some links in your guide do not lead to files you write about - it's worth checking.
Click to expand...
Click to collapse
Well my links was the moto links
i will take a look
If your bootloader is unlocked , and TWRP is flashed , you are ready to try the roms
Well is only a way to boot the phone , volume + and power button , this lead you in TWRP , from there " System " then " restart " and all will be good
There are two roms that you can try my EUI 5.9.021S on 6.0.1 , or the Nougat 7.1.1 EUI6
Also why you don't sell this 4 devices ? And buy yourself something more better
Because i don't think that this x850 will be a developer supported device , better sell this 4 devices that you have , and buy something better , maybe an POCOPHONE F1
lucabest2002 said:
fantastic.. if possible add "multilangiuage".. option/language & imput/ add language
Click to expand...
Click to collapse
As far as I know, it's possible to add a language in the settings.
Updated firmware LeMaX3_EUI_6_by_Hero of Labor_final.
-Updated GoogleCamera (shoots in portrait mode).
-Guilt GooglFoto (for the filming of GoogleCamera in portrait mode in the settings of the developer of the camera to check the box "Use Google Photo".
-Changed the launcher for the native from LeEco.
-Changed the keyboard.
-work of GPS is improved.
After fully customizing the firmware to your liking i strongly advise you to freeze applications from the list of ant07.http://4pda.ru/forum/index.php?s=&showtopic=907872&view=findpost&p=76127861