[Q] S4- sgh-m919 calling/wifi problem - Galaxy S 4 Q&A, Help & Troubleshooting

I just recently bought this phone off someone dont know what they did with it. phone has good imei. But when i make a call the phone seem to freeze or when i get incoming calling the phone freeze. Also the wifi wont let me toggle on. Cant seem to figure out what the problem is. If someone got a solution please do share.

1. Take a look what android firmware is using (Settings - General - About phone)
2. Go to DOWNLOAD MODE (Power off ur phone + Volume down. Volume up then. - Take a look how is the KNOX)
3. Install Kies (if ur phone use android 4.2.2) or Kies 3 (android 4.3 or superior) and take a look if all is ok ( Important see what CSC u use). Only making a factory reset solve the problems sometimes(Settings > Accounts > Back Up and Reset > Factory Data Reset > Reset Device > Delete All/Erase Everything). If this dont solve ur problems, follow the next step
4. Your seller installed one custom rom maybe. If all is ok in the step 3, you can update ur phone by there officially. If no, you will have to use ODIN and flash new stock rom.

Joku1981 said:
1. Take a look what android firmware is using (Settings - General - About phone)
2. Go to DOWNLOAD MODE (Power off ur phone + Volume down. Volume up then. - Take a look how is the KNOX)
3. Install Kies (if ur phone use android 4.2.2) or Kies 3 (android 4.3 or superior) and take a look if all is ok ( Important see what CSC u use). Only making a factory reset solve the problems sometimes(Settings > Accounts > Back Up and Reset > Factory Data Reset > Reset Device > Delete All/Erase Everything). If this dont solve ur problems, follow the next step
4. Your seller installed one custom rom maybe. If all is ok in the step 3, you can update ur phone by there officially. If no, you will have to use ODIN and flash new stock rom.
Click to expand...
Click to collapse
current binary: custom
system status:custom
Knox kernel lock 0x0
know warranty void 0x1
I tried kies 3 but doesn't recognize my phone in emergency firmware recovery. I tried flash stock rom but keep fialing!!!. I also found out the sound wasnt working either. I looked around in forum and there a post with the modem issue i tried to install that modem firmware but doesnt seem to work i think becuase i dont have cmw or twrp installed. but I cant get those on the phone without wifi.. so shine a light on me!!!! is there another way to factory reboot everything like all the hardware and software. or can u provide me detail instruction on how to use odin to reset to factory rom.

My friend going through the same thing but the calls goes thru you just can't hear what the other person is saying. Nor can the person hear me.
khd143 said:
current binary: custom
system status:custom
Knox kernel lock 0x0
know warranty void 0x1
I tried kies 3 but doesn't recognize my phone in emergency firmware recovery. I tried flash stock rom but keep fialing!!!. I also found out the sound wasnt working either. I looked around in forum and there a post with the modem issue i tried to install that modem firmware but doesnt seem to work i think becuase i dont have cmw or twrp installed. but I cant get those on the phone without wifi.. so shine a light on me!!!! is there another way to factory reboot everything like all the hardware and software. or can u provide me detail instruction on how to use odin to reset to factory rom.
Click to expand...
Click to collapse

Same issue Here!
khd143 said:
I just recently bought this phone off someone dont know what they did with it. phone has good imei. But when i make a call the phone seem to freeze or when i get incoming calling the phone freeze. Also the wifi wont let me toggle on. Cant seem to figure out what the problem is. If someone got a solution please do share.
Click to expand...
Click to collapse
Get the same problem here! I've been try many methods to fix it, not good news so far.
Since update to MK2 JellyBean4.3 via Kies! No sound at all, no wifi, freeze when make or receive calls (It's really annoying)
If you find something cool please let me know.... I'll keep trying here.
My device t-mobile SGH-M919 Stock MDL JellyBean4.2.2
Good Lucky

Related

[Q] GS4 - How to return completely stock for warranty exchange

Hi,
I've been do many flash last 24 hours on my Galaxy S4(Model SGH-I337M, Telus). Initialy, i've the factory stock rom, rooted. So, yesterday, i've decided to install Cyanogen mods nightly on my phone. Not the first time i've been used it on my phone. No problem before. So, this night, after a friend show me the release canditate release seem to be more stable, i've been try to put it on my phone. So, accidentaly wipe all the data on my phone. When i'm back home, i've put again the samsung original rom from my operator(4.2.2), found here, on the website, whit odin. All completed succefully, but i've noticed that the wifi won't turn on after the flash, and no sound from the speaker. So, i've put Cyanogen nigthlies again to test if it rom relative, but same issues here, no sound, but the wifi was working. The phone was very instable, so. Then, finaly, put the original rom again, without any rooting. Stuck on samsung logo, that i've finaly got fixed by clear the data and cache. But, no sound, and no wifi. Instable too.
Precision about phone: Unlocked whit the service mode(work), and enabled AWS whit a software and file(tutorial found here)
My question is: Anything else i can do to make my phone work fine again, and does it's possible to make the phone totaly stock? When i boot up, i've noticed that the phone, whit all rom i've try, said on samsung logo: Kernel is not sendroid enfonced, warranty status: kernel, so i can't go to return my phone on warranty whit that. How i can erase that line, and make my phone seem to be no modified?
Just to specify, it's not the first time i flash a phone. Do many flash, whit galaxy s2, s3 and s4, and sure, mine. Got try Cyanogen, stock, know how Odin work and all, try many rom, and before today, never has any problem to do turn back, but now, it's seem to be impossible.
Thank you very much for your help, very appreciated!
I would flash the stock firmware with odin again. After flashing do a factory reset in the stock recovery.
jd1639 said:
I would flash the stock firmware with odin again. After flashing do a factory reset in the stock recovery.
Click to expand...
Click to collapse
I've just try this. Flash the stock rom whit odin, and factory reset on original recovery after. Same, no wifi, no any sound.
Just see yesterday, when i'm flashing, i'm flashing on the bootloader in odin(whit the tar for the stock rom). Today, correct this by flash on the pda section, still not work. Found here on the forum the stock bootloader, rom, csc, and modem, but when i do this whit odin, odin said fail.
Thank very much, i think my phone is dead, and nothing to do to exchange it on warranty.
I think Kies has an emergency firmware recovery mode.... maybe that'll work.
Found a nice guide here: http://forum.xda-developers.com/showthread.php?t=2261153
saj222 said:
I think Kies has an emergency firmware recovery mode.... maybe that'll work.
Found a nice guide here: http://forum.xda-developers.com/showthread.php?t=2261153
Click to expand...
Click to collapse
Just try this. Kies is the worst software i've ever see. The software completely freeze random. When i go to the emergency menu, never, kies recognize my phone here. I've tried to plug my phone, no recognized. Tried without plug it, no recognized. When i plug it, kies said connection in progress, and can stay here 30 min.
I'm a idea of what is my problem. Before do install of cyanogen, i've been applied the samsung official 4.3 update, whit knox. And, according to what i read on many forum, knox is not ereasable, So, it's completely freeze my phone, and nothing to do.
Anyone have the factory telus bootloader and other factory stock items because i want to put it stock.
Thank.
Finally get problems fixed by take the TELUS stock 4.3 ROM and flash it whit Odin. After, can flash cyanogen nightlies again and the phone work well again.
Whit the stock ROM, didn't see any line on the Samsung boot logo that i've rooted. After root this appear again. Knox regardless of ROM installed said 0x1.
If anyone have a fix to put it again 0x0 very appreciated otherwise the phone work fine and thank you very much for your help.
dardares said:
Just try this. Kies is the worst software i've ever see. The software completely freeze random. When i go to the emergency menu, never, kies recognize my phone here. I've tried to plug my phone, no recognized. Tried without plug it, no recognized. When i plug it, kies said connection in progress, and can stay here 30 min.
I'm a idea of what is my problem. Before do install of cyanogen, i've been applied the samsung official 4.3 update, whit knox. And, according to what i read on many forum, knox is not ereasable, So, it's completely freeze my phone, and nothing to do.
Anyone have the factory telus bootloader and other factory stock items because i want to put it stock.
Thank.
Click to expand...
Click to collapse
I've seen worse software, it's no better or worse than iTunes.
Sent from my SGH-I337M using Tapatalk
dardares said:
Finally get problems fixed by take the TELUS stock 4.3 ROM and flash it whit Odin. After, can flash cyanogen nightlies again and the phone work well again.
Whit the stock ROM, didn't see any line on the Samsung boot logo that i've rooted. After root this appear again. Knox regardless of ROM installed said 0x1.
If anyone have a fix to put it again 0x0 very appreciated otherwise the phone work fine and thank you very much for your help.
Click to expand...
Click to collapse
can u plz give me link for the flash file u just flash
i have same problem here after i flash with 4.2.2 no sound and phone freez all time
i like to flash 4.3 so i can fix my phone
thanks
mps5566 said:
can u plz give me link for the flash file u just flash
i have same problem here after i flash with 4.2.2 no sound and phone freez all time
i like to flash 4.3 so i can fix my phone
thanks
Click to expand...
Click to collapse
This is the link i've found whit all the factory stock operator ROM. This is what rescue me.
http://forum.xda-developers.com/showthread.php?t=2269304
@Spacemonkie4207 never my itune was freeze, and i can do basic operation like transfer music or create playlist without any problem. My kies stay on connection in progress, and turn, turn, turn, but never connect. And when it connect, only one operation, and kies completely freeze, stop responding, need to close it, and open it again. Tried many cable, usb cable, reinstalling software, two other computer, but nothing to do.
I recovered back to stock from custom to 4.3 however if you do so, depending on carrier you could lose root and the ability to install custom recovery.
I would revert back to 4.2.2 (as it's knox free) go to samsungupdates (google it) and pull the 4.2.2 for your region and carrier. flash with odin 3.9
you'll lose root, but you can always perform again as long as not on 4.3 (with 4.3 u can still root if you remove all the knox stuff, u just lose warranty).
Az

[Q] No Sound or WiFi or Calling S4 I337M

Hey I'm new to these forums but I'm having an issue with my Galaxy S4 SGH-I337M. I had 4.3 firmware on my phone and it was rooted and then I attempted to unroot with Mobile Odin, but I messed it up halfway through. It was frozen on the Samsung Galaxy S4 screen and in the corner it said:
"KERNEL IS NOT SEANDROID ENFORCING.
Set warranty bit: kernel"
I flashed a 4.2.2 rom in Odin on my computer and it started to work again but I had no WiFi, no sound and I cannot receive or send calls. It was also running very slowly. I thought that updating to 4.4.2 would help, it didn't really change anything except what it said would be. Please help as I want WiFi and sound and the ability to call people. Is there any way to return all the software on the phone to the original state it was in so that it runs faster and like it would coming out of the box?
dial *#06# if you see numbers for the imei tell me
if you dont see anything then you lost your imei so you cant use wifi or calls
RubbaBand said:
dial *#06# if you see numbers for the imei tell me
if you dont see anything then you lost your imei so you cant use wifi or calls
Click to expand...
Click to collapse
I can see the imei. It says
what firmware you used for flashing?
Skeens93 said:
Hey I'm new to these forums but I'm having an issue with my Galaxy S4 SGH-I337M. I had 4.3 firmware on my phone and it was rooted and then I attempted to unroot with Mobile Odin, but I messed it up halfway through. It was frozen on the Samsung Galaxy S4 screen and in the corner it said:
"KERNEL IS NOT SEANDROID ENFORCING.
Set warranty bit: kernel"
I flashed a 4.2.2 rom in Odin on my computer and it started to work again but I had no WiFi, no sound and I cannot receive or send calls. It was also running very slowly. I thought that updating to 4.4.2 would help, it didn't really change anything except what it said would be. Please help as I want WiFi and sound and the ability to call people. Is there any way to return all the software on the phone to the original state it was in so that it runs faster and like it would coming out of the box?
Click to expand...
Click to collapse
1. You tripped KNOX when you downgraded ur phone (KNOX:0x1 in bootloader). This mean no WARRANTY. You never will have again like in original state.
2. For recovery the sound and wifi:
- Make a backup of your internal memory.
- Make a factory reset:
Wake your Samsung Galaxy S4
Navigate to and tap on Settings.
Go to Accounts
Tap Backup & reset.
Select Factory data reset.
You will see a warning – read it and tap Reset phone.
Now tap Erase everything.
That's it.
- Shutdown ur phone and get it in DOWNLOAD MODE.
- Flash again through ODIN the firmware with android 4.4.2
Joku1981 said:
1. You tripped KNOX when you downgraded ur phone (KNOX:0x1 in bootloader). This mean no WARRANTY. You never will have again like in original state.
2. For recovery the sound and wifi:
- Make a backup of your internal memory.
- Make a factory reset:
Wake your Samsung Galaxy S4
Navigate to and tap on Settings.
Go to Accounts
Tap Backup & reset.
Select Factory data reset.
You will see a warning – read it and tap Reset phone.
Now tap Erase everything.
That's it.
- Shutdown ur phone and get it in DOWNLOAD MODE.
- Flash again through ODIN the firmware with android 4.4.2
Click to expand...
Click to collapse
1. Okay that makes sense, I just want it to run like it did when I bought it.
2. How do I make a backup of internal memory? And where do I find this firmware?
Skeens93 said:
1. Okay that makes sense, I just want it to run like it did when I bought it.
2. How do I make a backup of internal memory? And where do I find this firmware?
Click to expand...
Click to collapse
- Make a backup internal memory: Only copy all folders of your internal memory to ur pc (I dont want u lose photos, music, etc)
- For find this firmware:
1. Make a backup of ur Internal Memory
2. Make a factory reset (Settings > Accounts > Back Up and Reset > Factory Data Reset > Reset Device > Delete All/Erase Everything.)
3. Install Kies 3 program in ur pc. Conect ur phone to ur pc.
4. Kies 3 will give u the info you need for know ur correct CSC. This will be btw parenthesis close CSC. (Like in pic attached)
5. Knowing ur CSC, take a look for this firmware in Sammobile.com
6. Download and flash it with ODIN.
*EDIT: Pls delete your IMEI in the post #3 and don't post it never ever for ur security.
Joku1981 said:
- Make a backup internal memory: Only copy all folders of your internal memory to ur pc (I dont want u lose photos, music, etc)
- For find this firmware:
1. Make a backup of ur Internal Memory
2. Make a factory reset (Settings > Accounts > Back Up and Reset > Factory Data Reset > Reset Device > Delete All/Erase Everything.)
3. Install Kies 3 program in ur pc. Conect ur phone to ur pc.
4. Kies 3 will give u the info you need for know ur correct CSC. This will be btw parenthesis close CSC. (Like in pic attached)
5. Knowing ur CSC, take a look for this firmware in Sammobile.com
6. Download and flash it with ODIN.
Click to expand...
Click to collapse
How do you know this will work? Like what is the thought process here?
Skeens93 said:
How do you know this will work? Like what is the thought process here?
Click to expand...
Click to collapse
This never fails if you do the process correctly :highfive:. Ask if you need
Joku1981 said:
This never fails if you do the process correctly :highfive:. Ask if you need
Click to expand...
Click to collapse
Okay so, factory reset, download mode, flash the CORRECT FIRMWARE, and hey presto it's fixed? Also am I using the correct firmware to flash? I have a SGH-I337M with Bell (Canada). I attached a screenshot from Kies, and a screenshot of the firmware I'm downloading.
Skeens93 said:
Okay so, factory reset, download mode, flash the CORRECT FIRMWARE, and hey presto it's fixed? Also am I using the correct firmware to flash? I have a SGH-I337M with Bell (Canada). I attached a screenshot from Kies, and a screenshot of the firmware I'm downloading.
Click to expand...
Click to collapse
Yes all is correct. Only remember:
- Flash this firmware through ODIN (like in pic attached) and remember flash it one second time if you still without wifi or make calls . Tell me how it works.
Joku1981 said:
Yes all is correct. Only remember:
- Flash this firmware through ODIN (like in pic attached) and remember flash it one second time if you still without wifi or make calls . Tell me how it works.
Click to expand...
Click to collapse
It failed. What now?

HELP my N9005 bugs after I flash stock firmware

DAY 1: My phone bootloops when i flashed a modem. So I flashed a firmware base on my country (Philippines N9005XXUEND6). I used odin 3.09 for flashing, did check the FRESET TIME, AUTOREBOOT, AP BOX and BOOTLOADER UPDATE.. It was successful but on the homescreen, "setup wizard has stopped" flashes on screen so I factory reset via stock recovery, then it runs ok.. Set up is done,. But another problems are:
1. entering camera, it shows black screen then says "warning: camera failed".
2. entering the phone dialler it takes seconds to respond
3. music is freezes
4. unlocking the phone it takes seconds to open
5.wakelock takes seconds also to respond
6. no sound
N9005XXUEND6 is the firmware I flashed.
DAY 2: I flashed a different firmwares XXUEND5, XXUENB4, but i notice that i after flashing, no setup wizard in the homescreen. It is the same settings,wallpaper and i have the messages and conversations in my inbox. It looks like the firmware didnt update but i look up in the baseband and build version it does change.. A friend of mind says that after flashing a firmware setup wizard must pop on the screen but mine doesnt.HELP ME MASTERS.. Im losing hope..
I cant figure out the problem, my drivers is installed, i have the firmwares, odin 3.09, and all required tools for flashing
please help me masters.. I did trying reflash the firware and do the reset, the problem persist.. thanks in advance
I have a similar problem, but I think yours is much more simpler hopefully
You find the data unchanged because you didn't do a factory reset
To do so, turn off your phone then open recovery mode by pressing VOLUME+, HOME & POWER buttons together until it opens
Choose Wipe Data/ Factory Reset --> Yes
then reboot your phone
My phone turned out to have a RAM problem and still haven't fixed it, it will cost me a lot especially that I voided my warranty because I rooted the phone
The same problem exactly!!! And I do all reset severel times! Help us!!!
Garri1980 said:
The same problem exactly!!! And I do all reset severel times! Help us!!!
Click to expand...
Click to collapse
If you could fix it don't forget to tell us about it
BTW I found a post online that says the problem could be due to separated camera from the motherboard
So if you don't have warranty as myself you should get it to maintenance service and tell them to check the camera
moustafaatchy said:
I have a similar problem, but I think yours is much more simpler hopefully
You find the data unchanged because you didn't do a factory reset
To do so, turn off your phone then open recovery mode by pressing VOLUME+, HOME & POWER buttons together until it opens
Choose Wipe Data/ Factory Reset --> Yes
then reboot your phone
My phone turned out to have a RAM problem and still haven't fixed it, it will cost me a lot especially that I voided my warranty because I rooted the phone
Click to expand...
Click to collapse
-i did that also sir but the problem persist..
moustafaatchy said:
If you could fix it don't forget to tell us about it
BTW I found a post online that says the problem could be due to separated camera from the motherboard
So if you don't have warranty as myself you should get it to maintenance service and tell them to check the camera
Click to expand...
Click to collapse
- Sir before i flash the modem, the phone works flawlessly but when it bootloops and i flash a stock firmware the other day the problem began to appear..
ian_drimworld73 said:
- Sir before i flash the modem, the phone works flawlessly but when it bootloops and i flash a stock firmware the other day the problem began to appear..
Click to expand...
Click to collapse
What is your Knox Warranty Void status ?
if it's still 0x0, you should send it to Samsung service
moustafaatchy said:
What is your Knox Warranty Void status ?
if it's still 0x0, you should send it to Samsung service
Click to expand...
Click to collapse
-0x1
ian_drimworld73 said:
-0x1
Click to expand...
Click to collapse
Then I guess your problem is like mine .. it could be hardware related :\
After I installed this ROM I found the camera working but not video camera and still can't play videos but there are no hangs
It still has problems but it sort of confirmed that I have a hardware problem
You need to be rooted
It's an AOSP ROM without Samsung Touchwiz ..
http://downloadandroidrom.com/file/...esurrection_Remix_KK_v5.0.9-20140416-hlte.zip
http://mirror41.downloadandroidrom....ock-4.4.2-20140207-signed.zip?token=866958839
Boot into Recovery .. Do a Factory Reset .. then flash the ROM then the gapps
moustafaatchy said:
Then I guess your problem is like mine .. it could be hardware related :\
After I installed this ROM I found the camera working but not video camera and still can't play videos but there are no hangs
It still has problems but it sort of confirmed that I have a hardware problem
You need to be rooted
It's an AOSP ROM without Samsung Touchwiz ..
http://downloadandroidrom.com/file/...esurrection_Remix_KK_v5.0.9-20140416-hlte.zip
http://mirror41.downloadandroidrom....ock-4.4.2-20140207-signed.zip?token=866958839
Boot into Recovery .. Do a Factory Reset .. then flash the ROM then the gapps
Click to expand...
Click to collapse
-thanks for the info sir.. but i guess its not hardware because i handle the phone carefully and it does not drop on the floor. I will thanks
-go to recovery, wipe data
- go to download mode, reflash via odin
reboot
arinsms said:
-go to recovery, wipe data
- go to download mode, reflash via odin
reboot
Click to expand...
Click to collapse
-I did that several times sir. still no luck
Hey, did you burn plywood the correct version of rum for your device? Moreover, you must make fool wipe, what version you had before making the root? That if there is a 4.3 to try to go back to 4.4.2
Sorry for bed English
Sent from my SM-N900 using XDA Free mobile app
ian_drimworld73 said:
-thanks for the info sir.. but i guess its not hardware because i handle the phone carefully and it does not drop on the floor. I will thanks
Click to expand...
Click to collapse
You said you tried updating the firmware of your region and the problem persists .. You should let someone flash the software using a BOX (not just using odin) (preferably go to Samsung)
if it's not solved then it's most probably a hardware problem .. I didn't drop my phone either but that's not necessary
Same problems with my n9005
ian_drimworld73 said:
DAY 1: My phone bootloops when i flashed a modem. So I flashed a firmware base on my country (Philippines N9005XXUEND6). I used odin 3.09 for flashing, did check the FRESET TIME, AUTOREBOOT, AP BOX and BOOTLOADER UPDATE.. It was successful but on the homescreen, "setup wizard has stopped" flashes on screen so I factory reset via stock recovery, then it runs ok.. Set up is done,. But another problems are:
1. entering camera, it shows black screen then says "warning: camera failed".
2. entering the phone dialler it takes seconds to respond
3. music is freezes
4. unlocking the phone it takes seconds to open
5.wakelock takes seconds also to respond
6. no sound
N9005XXUEND6 is the firmware I flashed.
DAY 2: I flashed a different firmwares XXUEND5, XXUENB4, but i notice that i after flashing, no setup wizard in the homescreen. It is the same settings,wallpaper and i have the messages and conversations in my inbox. It looks like the firmware didnt update but i look up in the baseband and build version it does change.. A friend of mind says that after flashing a firmware setup wizard must pop on the screen but mine doesnt.HELP ME MASTERS.. Im losing hope..
I cant figure out the problem, my drivers is installed, i have the firmwares, odin 3.09, and all required tools for flashing
please help me masters.. I did trying reflash the firware and do the reset, the problem persist.. thanks in advance
Click to expand...
Click to collapse
Hello guys what is described up is happening same to me ... tryied to update firmware from sammobile with a stock firmware Vodafone Romania and Odin show me some new lines when it updates like NON NHUL and a TGZ ZT etc ... suddenly failed to update .. and the phone freezed ... messagge was FAILED to update .. I did a restart and the two comps showed and the text : failed to upgrade firmware etc etc ... try use emergency firmware update trough kies ... restarted V Down +home +power : ) tryied to reinstal my fisrt NC2 Poland firmware succeded but
1. no sound
no camera
no music I guess That is a problem with the new Firmware ?Q? Probably we can ask MR. Chainfire or someone hwo knows ? I tryied all things ... but nothing happened even to restore data from kies /backup/trough Odin reflash old backup with TRP/CWM.
ANY ADVISE ? Never download even from sammobile or sammupdate if they say is ok if you never saw someone hwo succes
NEWS : I've noticed that suddenly when try to update again my Note3 shows only one language Chinese , probably becouse this new update NF at the end is for chinese exinos ????
1.Tryied to install CM last nightlies ...now the device work lmost 90%.
Bugs : No sound yet ...but i can acces settings sounds
E-mail has stoped
When i receive a call the phone shows answer/reject mode ..when i answer the phone become black screen amd keep vibrate.
Trying to call ...the phone call wizard has stoped wait/stop.
Things solved : Again can send and receive sms/mms
Camera works again and flashes
Sec android wizard works ...
Pit file euro open worked. I'm still having problems .
I checked. Again to see ...i tryied to install a singapore firmware nf6 I guess that was the problem.
solved mine
pisicutumic said:
Hello guys what is described up is happening same to me ... tryied to update firmware from sammobile with a stock firmware Vodafone Romania and Odin show me some new lines when it updates like NON NHUL and a TGZ ZT etc ... suddenly failed to update .. and the phone freezed ... messagge was FAILED to update .. I did a restart and the two comps showed and the text : failed to upgrade firmware etc etc ... try use emergency firmware update trough kies ... restarted V Down +home +power : ) tryied to reinstal my fisrt NC2 Poland firmware succeded but
1. no sound
no camera
no music I guess That is a problem with the new Firmware ?Q? Probably we can ask MR. Chainfire or someone hwo knows ? I tryied all things ... but nothing happened even to restore data from kies /backup/trough Odin reflash old backup with TRP/CWM.
ANY ADVISE ? Never download even from sammobile or sammupdate if they say is ok if you never saw someone hwo succes
NEWS : I've noticed that suddenly when try to update again my Note3 shows only one language Chinese , probably becouse this new update NF at the end is for chinese exinos ????
1.Tryied to install CM last nightlies ...now the device work lmost 90%.
Bugs : No sound yet ...but i can acces settings sounds
E-mail has stoped
When i receive a call the phone shows answer/reject mode ..when i answer the phone become black screen amd keep vibrate.
Trying to call ...the phone call wizard has stoped wait/stop.
Things solved : Again can send and receive sms/mms
Camera works again and flashes
Sec android wizard works ...
Pit file euro open worked. I'm still having problems .
I checked. Again to see ...i tryied to install a singapore firmware nf6 I guess that was the problem.
Click to expand...
Click to collapse
-bro my note3 is back.. just flash the singapore latest firmware at flash it via odin your problem will be solved! Godbless
NEWS
ian_drimworld73 said:
-bro my note3 is back.. just flash the singapore latest firmware at flash it via odin your problem will be solved! Godbless
Click to expand...
Click to collapse
I saw now the CSC is XSP this is the only prb but also is csc free no bloatware.also you can root back again and you can restore your old settings except :
1. CSC settings and APP settings that camed with your original firmware
2. when insert your sim back you will be notified to update internet settings to your provider ( for me Vodafone RO) , you can change them back to google.com . is ok THX for your apreciation.

[Q] Wifi lost; Unique problem maybe.

Anyways as my title says, i don't have wifi. I had first rooted my phone, but then I unrooted my phone by flashing some unrooted os on the samsung which caused two problems. My wifi and mobile data didn't work at all, but after I took it to a repair shop they fixed the mobile data and got it working again and rooted my phone but not the wifi part. According to the person that tried to fix my phone, the current android os, 4.3 - jellybean, that i flashed via odin is preventing the wifi from working. I don't really know whats wrong with the phone but can anyone help me? Also by baseband version is 1337UCUFNJ4 and the build number is JSS15.1337UCUEMK2. Should i try to find a ROM that matches my baseband version and flash it via odin? Thank you in advance!
P.S. This is my first thread, so please tell me if i violated any rules.
aldrichk said:
Anyways as my title says, i don't have wifi. I had first rooted my phone, but then I unrooted my phone by flashing some unrooted os on the samsung which caused two problems. My wifi and mobile data didn't work at all, but after I took it to a repair shop they fixed the mobile data and got it working again and rooted my phone but not the wifi part. According to the person that tried to fix my phone, the current android os, 4.3 - jellybean, that i flashed via odin is preventing the wifi from working. I don't really know whats wrong with the phone but can anyone help me? Also by baseband version is 1337UCUFNJ4 and the build number is JSS15.1337UCUEMK2. Should i try to find a ROM that matches my baseband version and flash it via odin? Thank you in advance!
P.S. This is my first thread, so please tell me if i violated any rules.
Click to expand...
Click to collapse
im having the same problem and i think we both have knox stupid security back on the phone that's blocking the wlan to start from bad permission or encryption
so personally yeah i will install back the original firmware (before 4.3) from factory reset (or via odin if i have to force it) then im gonna re-root the phone
having back permission ill remove knox (probly with titanium) lock and box bs from base firmware and probly remove root right
then im guessing ill have my internet back now will i go full rom again or basic function thats a good question
so many freaking remote exploit lately
ill let you know if that fix it
I also just found this
om22 said:
1. untick "Auto reboot" in odin
2. flash the stock rom again
3. reboot your phone to download mode again (by holding the power and vol down button for 10 sec)
4. flash the stock rom a second time with auto reboot ticked
This will fix your problem.
Click to expand...
Click to collapse
seems that clicking auto reboot might be the cause
so would i install the I337_NJ4_Stock_Kernel.tar.md5 file following that method or would i have to find another firmware/rom/(i don't know what to call this) unrooted
aldrichk said:
so would i install the I337_NJ4_Stock_Kernel.tar.md5 file following that method or would i have to find another firmware/rom/(i don't know what to call this) unrooted
Click to expand...
Click to collapse
official did not work for me
i the flashed / reset to factory for Galaxy S4 SGH-I337M VLUAMDJ
rebooted and prayed but no luck
finally found a solution but that did changed my PDA version to 9505 but got everything working again
so if you dont mind the 9505 change (more rom and solution for 9505) id go with echoes for all in 1 fresh install solution and its a nice rom
Instruction can be found on this thread : http://forum.xda-developers.com/showthread.php?t=2372286
knowing the problem was modem i did also found this solution to re-flash and fix wifi on i337 without changing to 9505
Follow these instruction to stay i337 : http://forum.xda-developers.com/showpost.php?p=46762296&postcount=1
but i have not tested for i337
in the end i got this setup
rom echoes illusion kot 49h
kernel : 3.4.103-aelkernel-v6.2
bootloader and baseband i337mvlufnc1
pda :i9595v jughn2
hardware/ board : qcom/msm8960
platform / chip : msm8960 / apq9064
modem /board : mdm9215m
hope that help
and sorry for bad english http://cdn4.xda-developers.com/images/icons/icon8.gif
EDIT PS: These solution require basic knowledge with odin flash and cwm recovery or twrp recovery

[Q] Revert Samsung Galaxy Grand Prime SM-G5030AZ back to stock Rom after Kingroot

Hello to you to you all. I wish I never rooted. I need to know what I did to my phone now that I used Kingroot on this Grand Prime. I also need to get my phone to not say custom in about phone. I tried Samsung Kies and I got error messages. Do I need to flash a stock Rom? Is my bootloader damaged? Please, I beg you experts please help me?. Thank you all in advance for your time and effort.
HammersmashDFCC said:
Hello to you to you all. I wish I never rooted. I need to know what I did to my phone now that I used Kingroot on this Grand Prime. I also need to get my phone to not say custom in about phone. I tried Samsung Kies and I got error messages. Do I need to flash a stock Rom? Is my bootloader damaged? Please, I beg you experts please help me?. Thank you all in advance for your time and effort.
Click to expand...
Click to collapse
Use super su, and un-root your phone with the option for un-root. Or just flash stock rom that's match your model.
I apologize but I have tried to give supersu superuser status although supersu would have those permissions from kingroot, it could not update it's binaries. When I did a full unroot with kingroot, my phone still was not allowed to receive over the air updates via wifi. About flashing a stock Rom I can reroot with kingroot but I cannot locate any stock Rom for this phone. I did a lot of research trying to find one. Can you please advise to as to where to go so that I can locate the stock Rom? Thank you.
HammersmashDFCC said:
I apologize but I have tried to give supersu superuser status although supersu would have those permissions from kingroot, it could not update it's binaries. When I did a full unroot with kingroot, my phone still was not allowed to receive over the air updates via wifi. About flashing a stock Rom I can reroot with kingroot but I cannot locate any stock Rom for this phone. I did a lot of research trying to find one. Can you please advise to as to where to go so that I can locate the stock Rom? Thank you.
Click to expand...
Click to collapse
here. just use odin to flash. and choose the correct version of your phone.
http://www.sammobile.com/firmwares/search/grand prime/
Thank you very much
I really appreciate you time and effort that you did.
Getting the stock firmware
I have searched that particular location and my model is SM-G530AZ and it's not found in that directory. I am at a checkmate. Unless I can use a firmware from one of the Grand Prime phones with a similar model but that to me does not make too much sense... Or maybe it does. But regarding my particular model it doesn't exist (or so it seems. Can one please come up with a solution? Flashing the Rom is the only option at this point so need download stock. Thanx everyone. ?.
HammersmashDFCC said:
I have searched that particular location and my model is SM-G530AZ and it's not found in that directory. I am at a checkmate. Unless I can use a firmware from one of the Grand Prime phones with a similar model but that to me does not make too much sense... Or maybe it does. But regarding my particular model it doesn't exist (or so it seems. Can one please come up with a solution? Flashing the Rom is the only option at this point so need download stock. Thanx everyone. ��.
Click to expand...
Click to collapse
Since your model is a dual with lte i guess you can use the 530h firmware. but i'm not sure.
My Model's Definite Firmware
Thank you very much for that info. But its not a definite so I wouldn't go ahead with it. I find it very interesting that for every other model of the Grand Prime there is a definete stock software available for the user. But when it comes to mine there isn't. So if anyone can possibly find it I'll be so happy.
HammersmashDFCC said:
Thank you very much for that info. But its not a definite so I wouldn't go ahead with it. I find it very interesting that for every other model of the Grand Prime there is a definete stock software available for the user. But when it comes to mine there isn't. So if anyone can possibly find it I'll be so happy.
Click to expand...
Click to collapse
I am facing the same challenge with my G530AZ model aswell. I am not even able to see my Network mode menu to change after realizing my device can not receive 3G signal only Edge. I located this menu after rooting to unlock my phone however it has completely vanished as I may put it. Any news on a compatible stock rom will be appreciated aswell.
Solution for reverting phone fully into stock (SM-G530AZ) & any other Samsung
I wasn't going to let Samsung Customer Service get away with not be able to give me info on how to get the code for emergency recovery mode using Samsung Kies. I got the Samsung Rep to tell me how to get the code in Kies all the time (in emergency recovery mode). Have the usb plugged in first without the phone connected to it. Then hold down the volume down key on your phone when it's OFF and after the volume down key is being held down, connect your phone to the USB while the Samsung Kies program is running. The code should show in Kies after that. Then go to the tools selection in Kies and click on the Recovery Mode option and you follow the further instructions. I didn't try this yet but I will very soon. I wrote this right after I got off the phone from the Samsung Rep. I really hope that this is a true method that works. If yes, cheers to all!
Sorry, can't be so trusting with Customer Service Rep of Samsung
I apologize for my previous post in a way. Well first of all this model SM-G530AZ (my model) isn't compatable with Kies as in that I got a message from Kies saying that. Therefore there was no way for me to know that the holding of the volume down method will generate the code for the emergency software reflash on this model. Finally, if that Rep was able to make that mistake I doubt whether it works for phones that are compatable with Kies.
sm-g530az
HammersmashDFCC said:
I apologize for my previous post in a way. Well first of all this model SM-G530AZ (my model) isn't compatable with Kies as in that I got a message from Kies saying that. Therefore there was no way for me to know that the holding of the volume down method will generate the code for the emergency software reflash on this model. Finally, if that Rep was able to make that mistake I doubt whether it works for phones that are compatable with Kies.
Click to expand...
Click to collapse
Any luck on flashing the sm-g530az. I try most of the firmware from sammobile. But no luck. And, sm-g5630az firmware is not in Sam Moblie.
Only solutions I can think of...
Earlier in this forum a member said that you can possibly use the 530h firmware, being that they are basically the same firmware as ours although he said he's not totally sure. If Kies 3 and the newer version of Kies (the name slipped my mind, but the message pops up anytime one installs Kies 3 asking if you want to download it) don't work because a message comes up saying that the phone doesn't support initializing, maybe what that member said is the only possible option for right now. But now I'm thinking that you can do anything to your phone which will be "normal" looking as far as for the things which the customer service reps look for see if the phone was tampered with which voids the warranty, in a repair center they can wipe all from the phone and put stock software. But the issue with that may be that the binaries that are on you phone now may cause your phone to get bricked being that their software uses different binaries. This is when they plug it in by them the phone need to load to 100% and if it stops in middle the phone is bricked. So they told me that there is that risk. If you can fool them into trying to do that flashing process on your phone because they seem to think that the warrantee is intact and it doesn't get bricked, you are good to go (I visited a Samsung repair center and found this out being that I had issues with them). But in your case that may or may not be possible . Good luck.
Your instructions were slightly off. Here's what worked.
1) install KIES 3. DO NOT PLUG IN PHONE
2) go to tools -> firmware upgrade and initialisation in KIES
3) device id = SM-G530AZ ; serial number is under battery
4) allow KIES to download the firmware
5) place phone in ODIN mode/Emergency Download Mode (hold VOL DWN and HOME while powering on ) then plug in phone to computer via USB
6) allow KIES to send image to phone. Have some ice cream and egg rolls and do not touch anything.
7) PROFIT! After the phone restarts, it will take you through initial set up (like when you bought it)
YOU WIN!! Even the Mobile Data is Set-up Already!​
All your screwups (soft brick, deletes systemui....) are forgiven. Don't do it again.
BONUS::
about: device status: official
odin mode:
current binaryfficial
system status: official
used knox status checker from gp.... 0x0 !
I think we just got our warranty back, baby :good:
OPTIONAL:
If you still want root, (re)reroot using the established method here
zomgitsanoob said:
Your instructions were slightly off. Here's what worked.
1) install KIES 3. DO NOT PLUG IN PHONE
2) go to tools -> firmware upgrade and initialisation in KIES
3) device id = SM-G530AZ ; serial number is under battery
4) allow KIES to download the firmware
5) place phone in ODIN mode/Emergency Download Mode (hold VOL DWN and HOME while powering on ) then plug in phone to computer via USB
6) allow KIES to send image to phone. Have some ice cream and egg rolls and do not touch anything.
7) PROFIT! After the phone restarts, it will take you through initial set up (like when you bought it)
YOU WIN!! Even the Mobile Data is Set-up Already!​
All your screwups (soft brick, deletes systemui....) are forgiven. Don't do it again.
BONUS::
about: device status: official
odin mode:
current binaryfficial
system status: official
used knox status checker from gp.... 0x0 !
I think we just got our warranty back, baby :good:
OPTIONAL:
If you still want root, (re)reroot using the established method here
Click to expand...
Click to collapse
did this work on the build g530az of5?
Cricket has not yet made lollipop available to me (I keep checking), so I have not been able to test it.
I have the SM-G530AZ and I'm trying to restore stock using the method you provided but I'm stuck at 8% update/initialization. I've tried everything I can think of to unbrick my phone. Please help!
iseewhatudid said:
I have the SM-G530AZ and I'm trying to restore stock using the method you provided but I'm stuck at 8% update/initialization. I've tried everything I can think of to unbrick my phone. Please help!
Click to expand...
Click to collapse
try again following those directions thoroughly, just worked for me earlier today, make sure you're on a good internet connection, and don't plug in the phone (which will be in download mode) until you absolutely have to. hope all goes well.
Thanks a million
zomgitsanoob said:
your instructions were slightly off. Here's what worked.
1) install kies 3. Do not plug in phone
2) go to tools -> firmware upgrade and initialisation in kies
3) device id = sm-g530az ; serial number is under battery
4) allow kies to download the firmware
5) place phone in odin mode/emergency download mode (hold vol dwn and home while powering on ) then plug in phone to computer via usb
6) allow kies to send image to phone. Have some ice cream and egg rolls and do not touch anything.
7) profit! After the phone restarts, it will take you through initial set up (like when you bought it)
you win!! Even the mobile data is set-up already!​
all your screwups (soft brick, deletes systemui....) are forgiven. Don't do it again.
bonus::
about: Device status: Official
odin mode:
Current binaryfficial
system status: Official
used knox status checker from gp.... 0x0 !
I think we just got our warranty back, baby :good:
Optional:
If you still want root, (re)reroot using the established method here
Click to expand...
Click to collapse
thank you so much man i had rooted my galaxy grand prime from cricket with kingroot ..couple hours later once my phone died and restarted it said my phone was flashed and locked due to unauthorized firmware ..i could not get into my phone at all.. Only able to see odin mode (download mode) ..so i did some research and could not find sm-g530az firmware anywhere for download. So i went to cricket they told me my phone is no good i had to get another one. I was furious ..but didnt give up since im pretty mobile phone and computer savvy. I still did some research found this thread and downloaded kies 3 .it did not recognize my phone for connection ..so i downloaded kies 2.6 and kies lite.
It just kept saying connecting ..so i then followed ur steps above and it brought my phone back to life ..crazy how cricket and even samsun themselves did not know what to do as i was on the phone with both of them ..they told me my phone is no longer good ..smh ...anyways thank you sooo much ..saved me about $150.
I hope this helps anyone else that is in the same position that i was in
same exact issue
BXXCLISIVE said:
thank you so much man i had rooted my galaxy grand prime from cricket with kingroot ..couple hours later once my phone died and restarted it said my phone was flashed and locked due to unauthorized firmware ..i could not get into my phone at all.. Only able to see odin mode (download mode) ..so i did some research and could not find sm-g530az firmware anywhere for download. So i went to cricket they told me my phone is no good i had to get another one. I was furious ..but didnt give up since im pretty mobile phone and computer savvy. I still did some research found this thread and downloaded kies 3 .it did not recognize my phone for connection ..so i downloaded kies 2.6 and kies lite.
It just kept saying connecting ..so i then followed ur steps above and it brought my phone back to life ..crazy how cricket and even samsun themselves did not know what to do as i was on the phone with both of them ..they told me my phone is no longer good ..smh ...anyways thank you sooo much ..saved me about $150.
I hope this helps anyone else that is in the same position that i was in
Click to expand...
Click to collapse
when i follow step 3 where i have to put in the model of the phone SM-G530AZ i enter it and it says please check model name and try again i see it says somthing about the serial number how is it supposed to be entered model name;serial number? becuse just using the model number doesnt get me passed anything :crying: :crying:

Categories

Resources